1/******************************************************************************
2 *
3 * Name: actbl.h - Basic ACPI Table Definitions
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions, and the following disclaimer,
16 *    without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 *    substantially similar to the "NO WARRANTY" disclaimer below
19 *    ("Disclaimer") and any redistribution must be conditioned upon
20 *    including a substantially similar Disclaimer requirement for further
21 *    binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 *    of any contributors may be used to endorse or promote products derived
24 *    from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#ifndef __ACTBL_H__
45#define __ACTBL_H__
46
47
48/*******************************************************************************
49 *
50 * Fundamental ACPI tables
51 *
52 * This file contains definitions for the ACPI tables that are directly consumed
53 * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
54 * device drivers and other OS support code.
55 *
56 * The RSDP and FACS do not use the common ACPI table header. All other ACPI
57 * tables use the header.
58 *
59 ******************************************************************************/
60
61
62/*
63 * Values for description table header signatures for tables defined in this
64 * file. Useful because they make it more difficult to inadvertently type in
65 * the wrong signature.
66 */
67#define ACPI_SIG_DSDT           "DSDT"      /* Differentiated System Description Table */
68#define ACPI_SIG_FADT           "FACP"      /* Fixed ACPI Description Table */
69#define ACPI_SIG_FACS           "FACS"      /* Firmware ACPI Control Structure */
70#define ACPI_SIG_PSDT           "PSDT"      /* Persistent System Description Table */
71#define ACPI_SIG_RSDP           "RSD PTR "  /* Root System Description Pointer */
72#define ACPI_SIG_RSDT           "RSDT"      /* Root System Description Table */
73#define ACPI_SIG_XSDT           "XSDT"      /* Extended  System Description Table */
74#define ACPI_SIG_SSDT           "SSDT"      /* Secondary System Description Table */
75#define ACPI_RSDP_NAME          "RSDP"      /* Short name for RSDP, not signature */
76
77
78/*
79 * All tables and structures must be byte-packed to match the ACPI
80 * specification, since the tables are provided by the system BIOS
81 */
82#pragma pack(1)
83
84/*
85 * Note about bitfields: The UINT8 type is used for bitfields in ACPI tables.
86 * This is the only type that is even remotely portable. Anything else is not
87 * portable, so do not use any other bitfield types.
88 */
89
90
91/*******************************************************************************
92 *
93 * Master ACPI Table Header. This common header is used by all ACPI tables
94 * except the RSDP and FACS.
95 *
96 ******************************************************************************/
97
98typedef struct acpi_table_header
99{
100    char                    Signature[ACPI_NAME_SIZE];          /* ASCII table signature */
101    UINT32                  Length;                             /* Length of table in bytes, including this header */
102    UINT8                   Revision;                           /* ACPI Specification minor version # */
103    UINT8                   Checksum;                           /* To make sum of entire table == 0 */
104    char                    OemId[ACPI_OEM_ID_SIZE];            /* ASCII OEM identification */
105    char                    OemTableId[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
106    UINT32                  OemRevision;                        /* OEM revision number */
107    char                    AslCompilerId[ACPI_NAME_SIZE];      /* ASCII ASL compiler vendor ID */
108    UINT32                  AslCompilerRevision;                /* ASL compiler version */
109
110} ACPI_TABLE_HEADER;
111
112
113/*******************************************************************************
114 *
115 * GAS - Generic Address Structure (ACPI 2.0+)
116 *
117 * Note: Since this structure is used in the ACPI tables, it is byte aligned.
118 * If misaliged access is not supported by the hardware, accesses to the
119 * 64-bit Address field must be performed with care.
120 *
121 ******************************************************************************/
122
123typedef struct acpi_generic_address
124{
125    UINT8                   SpaceId;                /* Address space where struct or register exists */
126    UINT8                   BitWidth;               /* Size in bits of given register */
127    UINT8                   BitOffset;              /* Bit offset within the register */
128    UINT8                   AccessWidth;            /* Minimum Access size (ACPI 3.0) */
129    UINT64                  Address;                /* 64-bit address of struct or register */
130
131} ACPI_GENERIC_ADDRESS;
132
133
134/*******************************************************************************
135 *
136 * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
137 *        Version 2
138 *
139 ******************************************************************************/
140
141typedef struct acpi_table_rsdp
142{
143    char                    Signature[8];               /* ACPI signature, contains "RSD PTR " */
144    UINT8                   Checksum;                   /* ACPI 1.0 checksum */
145    char                    OemId[ACPI_OEM_ID_SIZE];    /* OEM identification */
146    UINT8                   Revision;                   /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
147    UINT32                  RsdtPhysicalAddress;        /* 32-bit physical address of the RSDT */
148    UINT32                  Length;                     /* Table length in bytes, including header (ACPI 2.0+) */
149    UINT64                  XsdtPhysicalAddress;        /* 64-bit physical address of the XSDT (ACPI 2.0+) */
150    UINT8                   ExtendedChecksum;           /* Checksum of entire table (ACPI 2.0+) */
151    UINT8                   Reserved[3];                /* Reserved, must be zero */
152
153} ACPI_TABLE_RSDP;
154
155/* Standalone struct for the ACPI 1.0 RSDP */
156
157typedef struct acpi_rsdp_common
158{
159    char                    Signature[8];
160    UINT8                   Checksum;
161    char                    OemId[ACPI_OEM_ID_SIZE];
162    UINT8                   Revision;
163    UINT32                  RsdtPhysicalAddress;
164
165} ACPI_RSDP_COMMON;
166
167/* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
168
169typedef struct acpi_rsdp_extension
170{
171    UINT32                  Length;
172    UINT64                  XsdtPhysicalAddress;
173    UINT8                   ExtendedChecksum;
174    UINT8                   Reserved[3];
175
176} ACPI_RSDP_EXTENSION;
177
178
179/*******************************************************************************
180 *
181 * RSDT/XSDT - Root System Description Tables
182 *             Version 1 (both)
183 *
184 ******************************************************************************/
185
186typedef struct acpi_table_rsdt
187{
188    ACPI_TABLE_HEADER       Header;                 /* Common ACPI table header */
189    UINT32                  TableOffsetEntry[1];    /* Array of pointers to ACPI tables */
190
191} ACPI_TABLE_RSDT;
192
193typedef struct acpi_table_xsdt
194{
195    ACPI_TABLE_HEADER       Header;                 /* Common ACPI table header */
196    UINT64                  TableOffsetEntry[1];    /* Array of pointers to ACPI tables */
197
198} ACPI_TABLE_XSDT;
199
200
201/*******************************************************************************
202 *
203 * FACS - Firmware ACPI Control Structure (FACS)
204 *
205 ******************************************************************************/
206
207typedef struct acpi_table_facs
208{
209    char                    Signature[4];           /* ASCII table signature */
210    UINT32                  Length;                 /* Length of structure, in bytes */
211    UINT32                  HardwareSignature;      /* Hardware configuration signature */
212    UINT32                  FirmwareWakingVector;   /* 32-bit physical address of the Firmware Waking Vector */
213    UINT32                  GlobalLock;             /* Global Lock for shared hardware resources */
214    UINT32                  Flags;
215    UINT64                  XFirmwareWakingVector;  /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
216    UINT8                   Version;                /* Version of this table (ACPI 2.0+) */
217    UINT8                   Reserved[3];            /* Reserved, must be zero */
218    UINT32                  OspmFlags;              /* Flags to be set by OSPM (ACPI 4.0) */
219    UINT8                   Reserved1[24];          /* Reserved, must be zero */
220
221} ACPI_TABLE_FACS;
222
223/* Masks for GlobalLock flag field above */
224
225#define ACPI_GLOCK_PENDING          (1)             /* 00: Pending global lock ownership */
226#define ACPI_GLOCK_OWNED            (1<<1)          /* 01: Global lock is owned */
227
228/* Masks for Flags field above  */
229
230#define ACPI_FACS_S4_BIOS_PRESENT   (1)             /* 00: S4BIOS support is present */
231#define ACPI_FACS_64BIT_WAKE        (1<<1)          /* 01: 64-bit wake vector supported (ACPI 4.0) */
232
233/* Masks for OspmFlags field above */
234
235#define ACPI_FACS_64BIT_ENVIRONMENT (1)             /* 00: 64-bit wake environment is required (ACPI 4.0) */
236
237
238/*******************************************************************************
239 *
240 * FADT - Fixed ACPI Description Table (Signature "FACP")
241 *        Version 4
242 *
243 ******************************************************************************/
244
245/* Fields common to all versions of the FADT */
246
247typedef struct acpi_table_fadt
248{
249    ACPI_TABLE_HEADER       Header;             /* Common ACPI table header */
250    UINT32                  Facs;               /* 32-bit physical address of FACS */
251    UINT32                  Dsdt;               /* 32-bit physical address of DSDT */
252    UINT8                   Model;              /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
253    UINT8                   PreferredProfile;   /* Conveys preferred power management profile to OSPM. */
254    UINT16                  SciInterrupt;       /* System vector of SCI interrupt */
255    UINT32                  SmiCommand;         /* 32-bit Port address of SMI command port */
256    UINT8                   AcpiEnable;         /* Value to write to smi_cmd to enable ACPI */
257    UINT8                   AcpiDisable;        /* Value to write to smi_cmd to disable ACPI */
258    UINT8                   S4BiosRequest;      /* Value to write to SMI CMD to enter S4BIOS state */
259    UINT8                   PstateControl;      /* Processor performance state control*/
260    UINT32                  Pm1aEventBlock;     /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
261    UINT32                  Pm1bEventBlock;     /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
262    UINT32                  Pm1aControlBlock;   /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
263    UINT32                  Pm1bControlBlock;   /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
264    UINT32                  Pm2ControlBlock;    /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
265    UINT32                  PmTimerBlock;       /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
266    UINT32                  Gpe0Block;          /* 32-bit Port address of General Purpose Event 0 Reg Blk */
267    UINT32                  Gpe1Block;          /* 32-bit Port address of General Purpose Event 1 Reg Blk */
268    UINT8                   Pm1EventLength;     /* Byte Length of ports at Pm1xEventBlock */
269    UINT8                   Pm1ControlLength;   /* Byte Length of ports at Pm1xControlBlock */
270    UINT8                   Pm2ControlLength;   /* Byte Length of ports at Pm2ControlBlock */
271    UINT8                   PmTimerLength;      /* Byte Length of ports at PmTimerBlock */
272    UINT8                   Gpe0BlockLength;    /* Byte Length of ports at Gpe0Block */
273    UINT8                   Gpe1BlockLength;    /* Byte Length of ports at Gpe1Block */
274    UINT8                   Gpe1Base;           /* Offset in GPE number space where GPE1 events start */
275    UINT8                   CstControl;         /* Support for the _CST object and C States change notification */
276    UINT16                  C2Latency;          /* Worst case HW latency to enter/exit C2 state */
277    UINT16                  C3Latency;          /* Worst case HW latency to enter/exit C3 state */
278    UINT16                  FlushSize;          /* Processor's memory cache line width, in bytes */
279    UINT16                  FlushStride;        /* Number of flush strides that need to be read */
280    UINT8                   DutyOffset;         /* Processor duty cycle index in processor's P_CNT reg */
281    UINT8                   DutyWidth;          /* Processor duty cycle value bit width in P_CNT register */
282    UINT8                   DayAlarm;           /* Index to day-of-month alarm in RTC CMOS RAM */
283    UINT8                   MonthAlarm;         /* Index to month-of-year alarm in RTC CMOS RAM */
284    UINT8                   Century;            /* Index to century in RTC CMOS RAM */
285    UINT16                  BootFlags;          /* IA-PC Boot Architecture Flags (see below for individual flags) */
286    UINT8                   Reserved;           /* Reserved, must be zero */
287    UINT32                  Flags;              /* Miscellaneous flag bits (see below for individual flags) */
288    ACPI_GENERIC_ADDRESS    ResetRegister;      /* 64-bit address of the Reset register */
289    UINT8                   ResetValue;         /* Value to write to the ResetRegister port to reset the system */
290    UINT8                   Reserved4[3];       /* Reserved, must be zero */
291    UINT64                  XFacs;              /* 64-bit physical address of FACS */
292    UINT64                  XDsdt;              /* 64-bit physical address of DSDT */
293    ACPI_GENERIC_ADDRESS    XPm1aEventBlock;    /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
294    ACPI_GENERIC_ADDRESS    XPm1bEventBlock;    /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
295    ACPI_GENERIC_ADDRESS    XPm1aControlBlock;  /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
296    ACPI_GENERIC_ADDRESS    XPm1bControlBlock;  /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
297    ACPI_GENERIC_ADDRESS    XPm2ControlBlock;   /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
298    ACPI_GENERIC_ADDRESS    XPmTimerBlock;      /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
299    ACPI_GENERIC_ADDRESS    XGpe0Block;         /* 64-bit Extended General Purpose Event 0 Reg Blk address */
300    ACPI_GENERIC_ADDRESS    XGpe1Block;         /* 64-bit Extended General Purpose Event 1 Reg Blk address */
301
302} ACPI_TABLE_FADT;
303
304
305/* Masks for FADT Boot Architecture Flags (BootFlags) */
306
307#define ACPI_FADT_LEGACY_DEVICES    (1)         /* 00: [V2] System has LPC or ISA bus devices */
308#define ACPI_FADT_8042              (1<<1)      /* 01: [V3] System has an 8042 controller on port 60/64 */
309#define ACPI_FADT_NO_VGA            (1<<2)      /* 02: [V4] It is not safe to probe for VGA hardware */
310#define ACPI_FADT_NO_MSI            (1<<3)      /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
311#define ACPI_FADT_NO_ASPM           (1<<4)      /* 04: [V4] PCIe ASPM control must not be enabled */
312
313/* Masks for FADT flags */
314
315#define ACPI_FADT_WBINVD            (1)         /* 00: [V1] The wbinvd instruction works properly */
316#define ACPI_FADT_WBINVD_FLUSH      (1<<1)      /* 01: [V1] wbinvd flushes but does not invalidate caches */
317#define ACPI_FADT_C1_SUPPORTED      (1<<2)      /* 02: [V1] All processors support C1 state */
318#define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)      /* 03: [V1] C2 state works on MP system */
319#define ACPI_FADT_POWER_BUTTON      (1<<4)      /* 04: [V1] Power button is handled as a control method device */
320#define ACPI_FADT_SLEEP_BUTTON      (1<<5)      /* 05: [V1] Sleep button is handled as a control method device */
321#define ACPI_FADT_FIXED_RTC         (1<<6)      /* 06: [V1] RTC wakeup status not in fixed register space */
322#define ACPI_FADT_S4_RTC_WAKE       (1<<7)      /* 07: [V1] RTC alarm can wake system from S4 */
323#define ACPI_FADT_32BIT_TIMER       (1<<8)      /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
324#define ACPI_FADT_DOCKING_SUPPORTED (1<<9)      /* 09: [V1] Docking supported */
325#define ACPI_FADT_RESET_REGISTER    (1<<10)     /* 10: [V2] System reset via the FADT RESET_REG supported */
326#define ACPI_FADT_SEALED_CASE       (1<<11)     /* 11: [V3] No internal expansion capabilities and case is sealed */
327#define ACPI_FADT_HEADLESS          (1<<12)     /* 12: [V3] No local video capabilities or local input devices */
328#define ACPI_FADT_SLEEP_TYPE        (1<<13)     /* 13: [V3] Must execute native instruction after writing  SLP_TYPx register */
329#define ACPI_FADT_PCI_EXPRESS_WAKE  (1<<14)     /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
330#define ACPI_FADT_PLATFORM_CLOCK    (1<<15)     /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
331#define ACPI_FADT_S4_RTC_VALID      (1<<16)     /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
332#define ACPI_FADT_REMOTE_POWER_ON   (1<<17)     /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
333#define ACPI_FADT_APIC_CLUSTER      (1<<18)     /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
334#define ACPI_FADT_APIC_PHYSICAL     (1<<19)     /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
335
336
337/* Values for PreferredProfile (Prefered Power Management Profiles) */
338
339enum AcpiPreferedPmProfiles
340{
341    PM_UNSPECIFIED          = 0,
342    PM_DESKTOP              = 1,
343    PM_MOBILE               = 2,
344    PM_WORKSTATION          = 3,
345    PM_ENTERPRISE_SERVER    = 4,
346    PM_SOHO_SERVER          = 5,
347    PM_APPLIANCE_PC         = 6
348};
349
350
351/* Reset to default packing */
352
353#pragma pack()
354
355
356/*
357 * Internal table-related structures
358 */
359typedef union acpi_name_union
360{
361    UINT32                          Integer;
362    char                            Ascii[4];
363
364} ACPI_NAME_UNION;
365
366
367/* Internal ACPI Table Descriptor. One per ACPI table. */
368
369typedef struct acpi_table_desc
370{
371    ACPI_PHYSICAL_ADDRESS           Address;
372    ACPI_TABLE_HEADER               *Pointer;
373    UINT32                          Length;     /* Length fixed at 32 bits */
374    ACPI_NAME_UNION                 Signature;
375    ACPI_OWNER_ID                   OwnerId;
376    UINT8                           Flags;
377
378} ACPI_TABLE_DESC;
379
380/* Masks for Flags field above */
381
382#define ACPI_TABLE_ORIGIN_UNKNOWN       (0)
383#define ACPI_TABLE_ORIGIN_MAPPED        (1)
384#define ACPI_TABLE_ORIGIN_ALLOCATED     (2)
385#define ACPI_TABLE_ORIGIN_OVERRIDE      (4)
386#define ACPI_TABLE_ORIGIN_MASK          (7)
387#define ACPI_TABLE_IS_LOADED            (8)
388
389
390/*
391 * Get the remaining ACPI tables
392 */
393#include <contrib/dev/acpica/include/actbl1.h>
394#include <contrib/dev/acpica/include/actbl2.h>
395
396/* Macros used to generate offsets to specific table fields */
397
398#define ACPI_FADT_OFFSET(f)             (UINT8) ACPI_OFFSET (ACPI_TABLE_FADT, f)
399
400/*
401 * Sizes of the various flavors of FADT. We need to look closely
402 * at the FADT length because the version number essentially tells
403 * us nothing because of many BIOS bugs where the version does not
404 * match the expected length. In other words, the length of the
405 * FADT is the bottom line as to what the version really is.
406 *
407 * For reference, the values below are as follows:
408 *     FADT V1  size: 0x74
409 *     FADT V2  size: 0x84
410 *     FADT V3+ size: 0xF4
411 */
412#define ACPI_FADT_V1_SIZE       (UINT32) (ACPI_FADT_OFFSET (Flags) + 4)
413#define ACPI_FADT_V2_SIZE       (UINT32) (ACPI_FADT_OFFSET (Reserved4[0]) + 3)
414#define ACPI_FADT_V3_SIZE       (UINT32) (sizeof (ACPI_TABLE_FADT))
415
416#endif /* __ACTBL_H__ */
417