1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63SYSCTL_DEBUG opt_sysctl.h 64 65# Miscellaneous options. 66ADAPTIVE_LOCKMGRS 67ALQ 68AUDIT opt_global.h 69CAPABILITIES opt_capsicum.h 70CAPABILITY_MODE opt_capsicum.h 71CODA_COMPAT_5 opt_coda.h 72COMPAT_43 opt_compat.h 73COMPAT_43TTY opt_compat.h 74COMPAT_FREEBSD4 opt_compat.h 75COMPAT_FREEBSD5 opt_compat.h 76COMPAT_FREEBSD6 opt_compat.h 77COMPAT_FREEBSD7 opt_compat.h 78COMPILING_LINT opt_global.h 79COMPRESS_USER_CORES opt_core.h 80CY_PCI_FASTINTR 81DEADLKRES opt_watchdog.h 82DIRECTIO 83FULL_PREEMPTION opt_sched.h 84IPI_PREEMPTION opt_sched.h 85GEOM_AES opt_geom.h 86GEOM_BDE opt_geom.h 87GEOM_BSD opt_geom.h 88GEOM_CACHE opt_geom.h 89GEOM_CONCAT opt_geom.h 90GEOM_ELI opt_geom.h 91GEOM_FOX opt_geom.h 92GEOM_GATE opt_geom.h 93GEOM_JOURNAL opt_geom.h 94GEOM_LABEL opt_geom.h 95GEOM_LINUX_LVM opt_geom.h 96GEOM_MBR opt_geom.h 97GEOM_MIRROR opt_geom.h 98GEOM_MULTIPATH opt_geom.h 99GEOM_NOP opt_geom.h 100GEOM_PART_APM opt_geom.h 101GEOM_PART_BSD opt_geom.h 102GEOM_PART_EBR opt_geom.h 103GEOM_PART_EBR_COMPAT opt_geom.h 104GEOM_PART_GPT opt_geom.h 105GEOM_PART_LDM opt_geom.h 106GEOM_PART_MBR opt_geom.h 107GEOM_PART_PC98 opt_geom.h 108GEOM_PART_VTOC8 opt_geom.h 109GEOM_PC98 opt_geom.h 110GEOM_RAID opt_geom.h 111GEOM_RAID3 opt_geom.h 112GEOM_SHSEC opt_geom.h 113GEOM_STRIPE opt_geom.h 114GEOM_SUNLABEL opt_geom.h 115GEOM_UNCOMPRESS opt_geom.h 116GEOM_UZIP opt_geom.h 117GEOM_VINUM opt_geom.h 118GEOM_VIRSTOR opt_geom.h 119GEOM_VOL opt_geom.h 120GEOM_ZERO opt_geom.h 121KDTRACE_HOOKS opt_kdtrace.h 122KSTACK_MAX_PAGES 123KSTACK_PAGES 124KTRACE 125KTRACE_REQUEST_POOL opt_ktrace.h 126LIBICONV 127MAC opt_global.h 128MAC_BIBA opt_dontuse.h 129MAC_BSDEXTENDED opt_dontuse.h 130MAC_IFOFF opt_dontuse.h 131MAC_LOMAC opt_dontuse.h 132MAC_MLS opt_dontuse.h 133MAC_NONE opt_dontuse.h 134MAC_PARTITION opt_dontuse.h 135MAC_PORTACL opt_dontuse.h 136MAC_SEEOTHERUIDS opt_dontuse.h 137MAC_STATIC opt_mac.h 138MAC_STUB opt_dontuse.h 139MAC_TEST opt_dontuse.h 140MD_ROOT opt_md.h 141MD_ROOT_SIZE opt_md.h 142MFI_DEBUG opt_mfi.h 143MFI_DECODE_LOG opt_mfi.h 144MPROF_BUFFERS opt_mprof.h 145MPROF_HASH_SIZE opt_mprof.h 146NEW_PCIB opt_global.h 147NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 148NO_ADAPTIVE_RWLOCKS 149NO_ADAPTIVE_SX 150NO_SYSCTL_DESCR opt_global.h 151NSWBUF_MIN opt_swap.h 152MBUF_PACKET_ZONE_DISABLE opt_global.h 153PANIC_REBOOT_WAIT_TIME opt_panic.h 154PPC_DEBUG opt_ppc.h 155PPC_PROBE_CHIPSET opt_ppc.h 156PPS_SYNC opt_ntp.h 157PREEMPTION opt_sched.h 158PROCDESC opt_procdesc.h 159QUOTA 160SCHED_4BSD opt_sched.h 161SCHED_STATS opt_sched.h 162SCHED_ULE opt_sched.h 163SLEEPQUEUE_PROFILING 164SLHCI_DEBUG opt_slhci.h 165SPX_HACK 166STACK opt_stack.h 167SUIDDIR 168MSGMNB opt_sysvipc.h 169MSGMNI opt_sysvipc.h 170MSGSEG opt_sysvipc.h 171MSGSSZ opt_sysvipc.h 172MSGTQL opt_sysvipc.h 173SEMMNI opt_sysvipc.h 174SEMMNS opt_sysvipc.h 175SEMMNU opt_sysvipc.h 176SEMMSL opt_sysvipc.h 177SEMOPM opt_sysvipc.h 178SEMUME opt_sysvipc.h 179SHMALL opt_sysvipc.h 180SHMMAX opt_sysvipc.h 181SHMMAXPGS opt_sysvipc.h 182SHMMIN opt_sysvipc.h 183SHMMNI opt_sysvipc.h 184SHMSEG opt_sysvipc.h 185SYSVMSG opt_sysvipc.h 186SYSVSEM opt_sysvipc.h 187SYSVSHM opt_sysvipc.h 188SW_WATCHDOG opt_watchdog.h 189TURNSTILE_PROFILING 190UMTX_PROFILING 191VFS_AIO 192VERBOSE_SYSINIT opt_global.h 193WLCACHE opt_wavelan.h 194WLDEBUG opt_wavelan.h 195 196# POSIX kernel options 197P1003_1B_MQUEUE opt_posix.h 198P1003_1B_SEMAPHORES opt_posix.h 199_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 200 201# Do we want the config file compiled into the kernel? 202INCLUDE_CONFIG_FILE opt_config.h 203 204# Options for static filesystems. These should only be used at config 205# time, since the corresponding lkms cannot work if there are any static 206# dependencies. Unusability is enforced by hiding the defines for the 207# options in a never-included header. 208CD9660 opt_dontuse.h 209CODA opt_dontuse.h 210EXT2FS opt_dontuse.h 211FDESCFS opt_dontuse.h 212FFS opt_dontuse.h 213HPFS opt_dontuse.h 214MSDOSFS opt_dontuse.h 215NTFS opt_dontuse.h 216NULLFS opt_dontuse.h 217NWFS opt_dontuse.h 218PORTALFS opt_dontuse.h 219PROCFS opt_dontuse.h 220PSEUDOFS opt_dontuse.h 221REISERFS opt_dontuse.h 222SMBFS opt_dontuse.h 223TMPFS opt_dontuse.h 224UDF opt_dontuse.h 225UNIONFS opt_dontuse.h 226 227# Pseudofs debugging 228PSEUDOFS_TRACE opt_pseudofs.h 229 230# In-kernel GSS-API 231KGSSAPI opt_kgssapi.h 232KGSSAPI_DEBUG opt_kgssapi.h 233 234# These static filesystems have one slightly bogus static dependency in 235# sys/i386/i386/autoconf.c. If any of these filesystems are 236# statically compiled into the kernel, code for mounting them as root 237# filesystems will be enabled - but look below. 238NFSCLIENT opt_nfs.h 239NFSSERVER opt_nfs.h 240 241# Use these options to compile the experimental nfs client and/or 242# server that supports NFSv4 into a kernel. 243# NFSCL - client 244# NFSD - server 245NFSCL opt_nfs.h 246NFSD opt_nfs.h 247 248# filesystems and libiconv bridge 249CD9660_ICONV opt_dontuse.h 250MSDOSFS_ICONV opt_dontuse.h 251NTFS_ICONV opt_dontuse.h 252UDF_ICONV opt_dontuse.h 253 254# If you are following the conditions in the copyright, 255# you can enable soft-updates which will speed up a lot of thigs 256# and make the system safer from crashes at the same time. 257# otherwise a STUB module will be compiled in. 258SOFTUPDATES opt_ffs.h 259 260# On small, embedded systems, it can be useful to turn off support for 261# snapshots. It saves about 30-40k for a feature that would be lightly 262# used, if it is used at all. 263NO_FFS_SNAPSHOT opt_ffs.h 264 265# Enabling this option turns on support for Access Control Lists in UFS, 266# which can be used to support high security configurations. Depends on 267# UFS_EXTATTR. 268UFS_ACL opt_ufs.h 269 270# Enabling this option turns on support for extended attributes in UFS-based 271# filesystems, which can be used to support high security configurations 272# as well as new filesystem features. 273UFS_EXTATTR opt_ufs.h 274UFS_EXTATTR_AUTOSTART opt_ufs.h 275 276# Enable fast hash lookups for large directories on UFS-based filesystems. 277UFS_DIRHASH opt_ufs.h 278 279# Enable gjournal-based UFS journal. 280UFS_GJOURNAL opt_ufs.h 281 282# The below sentence is not in English, and neither is this one. 283# We plan to remove the static dependences above, with a 284# <filesystem>_ROOT option to control if it usable as root. This list 285# allows these options to be present in config files already (though 286# they won't make any difference yet). 287NFS_ROOT opt_nfsroot.h 288 289# SMB/CIFS requester 290NETSMB opt_netsmb.h 291 292# Options used only in subr_param.c. 293HZ opt_param.h 294MAXFILES opt_param.h 295NBUF opt_param.h 296NSFBUFS opt_param.h 297VM_BCACHE_SIZE_MAX opt_param.h 298VM_SWZONE_SIZE_MAX opt_param.h 299MAXUSERS 300DFLDSIZ opt_param.h 301MAXDSIZ opt_param.h 302MAXSSIZ opt_param.h 303 304# Generic SCSI options. 305CAM_MAX_HIGHPOWER opt_cam.h 306CAMDEBUG opt_cam.h 307CAM_DEBUG_COMPILE opt_cam.h 308CAM_DEBUG_DELAY opt_cam.h 309CAM_DEBUG_BUS opt_cam.h 310CAM_DEBUG_TARGET opt_cam.h 311CAM_DEBUG_LUN opt_cam.h 312CAM_DEBUG_FLAGS opt_cam.h 313CAM_BOOT_DELAY opt_cam.h 314SCSI_DELAY opt_scsi.h 315SCSI_NO_SENSE_STRINGS opt_scsi.h 316SCSI_NO_OP_STRINGS opt_scsi.h 317 318# Options used only in cam/ata/ata_da.c 319ADA_TEST_FAILURE opt_ada.h 320 321# Options used only in cam/scsi/scsi_cd.c 322CHANGER_MIN_BUSY_SECONDS opt_cd.h 323CHANGER_MAX_BUSY_SECONDS opt_cd.h 324 325# Options used only in cam/scsi/scsi_sa.c. 326SA_IO_TIMEOUT opt_sa.h 327SA_SPACE_TIMEOUT opt_sa.h 328SA_REWIND_TIMEOUT opt_sa.h 329SA_ERASE_TIMEOUT opt_sa.h 330SA_1FM_AT_EOD opt_sa.h 331 332# Options used only in cam/scsi/scsi_pt.c 333SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 334 335# Options used only in cam/scsi/scsi_ses.c 336SES_ENABLE_PASSTHROUGH opt_ses.h 337 338# Options used in dev/sym/ (Symbios SCSI driver). 339SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 340 # Allows the ncr to take precedence 341 # 1 (1<<0) -> 810a, 860 342 # 2 (1<<1) -> 825a, 875, 885, 895 343 # 4 (1<<2) -> 895a, 896, 1510d 344SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 345 # disabled:0 (default), enabled:1 346SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 347 # disabled:0, enabled:1 (default) 348SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 349 # default:8, range:[1..64] 350 351# Options used only in pci/ncr.c 352SCSI_NCR_DEBUG opt_ncr.h 353SCSI_NCR_MAX_SYNC opt_ncr.h 354SCSI_NCR_MAX_WIDE opt_ncr.h 355SCSI_NCR_MYADDR opt_ncr.h 356 357# Options used only in dev/isp/* 358ISP_TARGET_MODE opt_isp.h 359ISP_FW_CRASH_DUMP opt_isp.h 360ISP_DEFAULT_ROLES opt_isp.h 361ISP_INTERNAL_TARGET opt_isp.h 362 363# Options used only in dev/iscsi 364ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 365 366# Options used in the 'ata' ATA/ATAPI driver 367ATA_STATIC_ID opt_ata.h 368ATA_NOPCI opt_ata.h 369ATA_REQUEST_TIMEOUT opt_ata.h 370ATA_CAM opt_ata.h 371 372# Net stuff. 373ACCEPT_FILTER_DATA 374ACCEPT_FILTER_DNS 375ACCEPT_FILTER_HTTP 376ALTQ opt_global.h 377ALTQ_CBQ opt_altq.h 378ALTQ_CDNR opt_altq.h 379ALTQ_DEBUG opt_altq.h 380ALTQ_HFSC opt_altq.h 381ALTQ_NOPCC opt_altq.h 382ALTQ_PRIQ opt_altq.h 383ALTQ_RED opt_altq.h 384ALTQ_RIO opt_altq.h 385BOOTP opt_bootp.h 386BOOTP_BLOCKSIZE opt_bootp.h 387BOOTP_COMPAT opt_bootp.h 388BOOTP_NFSROOT opt_bootp.h 389BOOTP_NFSV3 opt_bootp.h 390BOOTP_WIRED_TO opt_bootp.h 391DEVICE_POLLING 392DEV_ENC opt_enc.h 393DEV_PF opt_pf.h 394DEV_PFLOG opt_pf.h 395DEV_PFSYNC opt_pf.h 396DEV_VLAN opt_vlan.h 397DUMMYNET opt_ipdn.h 398ETHER_8022 opt_ef.h 399ETHER_8023 opt_ef.h 400ETHER_II opt_ef.h 401ETHER_SNAP opt_ef.h 402INET opt_inet.h 403INET6 opt_inet6.h 404IPDIVERT 405IPFILTER opt_ipfilter.h 406IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 407IPFILTER_LOG opt_ipfilter.h 408IPFILTER_LOOKUP opt_ipfilter.h 409IPFIREWALL opt_ipfw.h 410IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 411IPFIREWALL_FORWARD 412IPFIREWALL_NAT opt_ipfw.h 413IPFIREWALL_VERBOSE opt_ipfw.h 414IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 415IPSEC opt_ipsec.h 416IPSEC_DEBUG opt_ipsec.h 417IPSEC_FILTERTUNNEL opt_ipsec.h 418IPSEC_NAT_T opt_ipsec.h 419IPSTEALTH 420IPX 421KRPC 422LIBALIAS 423LIBMBPOOL 424LIBMCHAIN 425MBUF_PROFILING 426MBUF_STRESS_TEST 427MROUTING opt_mrouting.h 428NCP 429NETATALK opt_atalk.h 430NFSLOCKD 431PCBGROUP opt_pcbgroup.h 432RADIX_MPATH opt_mpath.h 433ROUTETABLES opt_route.h 434SLIP_IFF_OPTS opt_slip.h 435TCPDEBUG 436TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 437TCP_SIGNATURE opt_inet.h 438VLAN_ARRAY opt_vlan.h 439XBONEHACK 440FLOWTABLE opt_route.h 441 442# 443# SCTP 444# 445SCTP opt_sctp.h 446SCTP_DEBUG opt_sctp.h # Enable debug printfs 447SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 448SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 449SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 450SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 451SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 452SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 453SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 454SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 455SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 456# 457# 458# 459 460# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 461# Each netgraph node type can be either be compiled into the kernel 462# or loaded dynamically. To get the former, include the corresponding 463# option below. Each type has its own man page, e.g. ng_async(4). 464NETGRAPH 465NETGRAPH_DEBUG opt_netgraph.h 466NETGRAPH_ASYNC opt_netgraph.h 467NETGRAPH_ATMLLC opt_netgraph.h 468NETGRAPH_ATM_ATMPIF opt_netgraph.h 469NETGRAPH_BLUETOOTH opt_netgraph.h 470NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 471NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 472NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 473NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 474NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 475NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 476NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 477NETGRAPH_BPF opt_netgraph.h 478NETGRAPH_BRIDGE opt_netgraph.h 479NETGRAPH_CAR opt_netgraph.h 480NETGRAPH_CISCO opt_netgraph.h 481NETGRAPH_DEFLATE opt_netgraph.h 482NETGRAPH_DEVICE opt_netgraph.h 483NETGRAPH_ECHO opt_netgraph.h 484NETGRAPH_EIFACE opt_netgraph.h 485NETGRAPH_ETHER opt_netgraph.h 486NETGRAPH_ETHER_ECHO opt_netgraph.h 487NETGRAPH_FEC opt_netgraph.h 488NETGRAPH_FRAME_RELAY opt_netgraph.h 489NETGRAPH_GIF opt_netgraph.h 490NETGRAPH_GIF_DEMUX opt_netgraph.h 491NETGRAPH_HOLE opt_netgraph.h 492NETGRAPH_IFACE opt_netgraph.h 493NETGRAPH_IP_INPUT opt_netgraph.h 494NETGRAPH_IPFW opt_netgraph.h 495NETGRAPH_KSOCKET opt_netgraph.h 496NETGRAPH_L2TP opt_netgraph.h 497NETGRAPH_LMI opt_netgraph.h 498# MPPC compression requires proprietary files (not included) 499NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 500NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 501NETGRAPH_NAT opt_netgraph.h 502NETGRAPH_NETFLOW opt_netgraph.h 503NETGRAPH_ONE2MANY opt_netgraph.h 504NETGRAPH_PATCH opt_netgraph.h 505NETGRAPH_PIPE opt_netgraph.h 506NETGRAPH_PPP opt_netgraph.h 507NETGRAPH_PPPOE opt_netgraph.h 508NETGRAPH_PPTPGRE opt_netgraph.h 509NETGRAPH_PRED1 opt_netgraph.h 510NETGRAPH_RFC1490 opt_netgraph.h 511NETGRAPH_SOCKET opt_netgraph.h 512NETGRAPH_SPLIT opt_netgraph.h 513NETGRAPH_SPPP opt_netgraph.h 514NETGRAPH_TAG opt_netgraph.h 515NETGRAPH_TCPMSS opt_netgraph.h 516NETGRAPH_TEE opt_netgraph.h 517NETGRAPH_TTY opt_netgraph.h 518NETGRAPH_UI opt_netgraph.h 519NETGRAPH_VJC opt_netgraph.h 520NETGRAPH_VLAN opt_netgraph.h 521 522# NgATM options 523NGATM_ATM opt_netgraph.h 524NGATM_ATMBASE opt_netgraph.h 525NGATM_SSCOP opt_netgraph.h 526NGATM_SSCFU opt_netgraph.h 527NGATM_UNI opt_netgraph.h 528NGATM_CCATM opt_netgraph.h 529 530# DRM options 531DRM_DEBUG opt_drm.h 532 533ZERO_COPY_SOCKETS opt_zero.h 534TI_SF_BUF_JUMBO opt_ti.h 535TI_JUMBO_HDRSPLIT opt_ti.h 536BCE_JUMBO_HDRSPLIT opt_bce.h 537 538# XXX Conflict: # of devices vs network protocol (Native ATM). 539# This makes "atm.h" unusable. 540NATM 541 542# DPT driver debug flags 543DPT_MEASURE_PERFORMANCE opt_dpt.h 544DPT_HANDLE_TIMEOUTS opt_dpt.h 545DPT_TIMEOUT_FACTOR opt_dpt.h 546DPT_LOST_IRQ opt_dpt.h 547DPT_RESET_HBA opt_dpt.h 548 549# Misc debug flags. Most of these should probably be replaced with 550# 'DEBUG', and then let people recompile just the interesting modules 551# with 'make CC="cc -DDEBUG"'. 552CLUSTERDEBUG opt_debug_cluster.h 553DEBUG_1284 opt_ppb_1284.h 554VP0_DEBUG opt_vpo.h 555LPT_DEBUG opt_lpt.h 556PLIP_DEBUG opt_plip.h 557LOCKF_DEBUG opt_debug_lockf.h 558NETATALKDEBUG opt_atalk.h 559SI_DEBUG opt_debug_si.h 560 561# Fb options 562FB_DEBUG opt_fb.h 563FB_INSTALL_CDEV opt_fb.h 564 565# ppbus related options 566PERIPH_1284 opt_ppb_1284.h 567DONTPROBE_1284 opt_ppb_1284.h 568 569# smbus related options 570ENABLE_ALART opt_intpm.h 571 572# These cause changes all over the kernel 573BLKDEV_IOSIZE opt_global.h 574BURN_BRIDGES opt_global.h 575DEBUG opt_global.h 576DEBUG_LOCKS opt_global.h 577DEBUG_VFS_LOCKS opt_global.h 578DFLTPHYS opt_global.h 579DIAGNOSTIC opt_global.h 580INVARIANT_SUPPORT opt_global.h 581INVARIANTS opt_global.h 582MAXCPU opt_global.h 583MAXPHYS opt_global.h 584MCLSHIFT opt_global.h 585MUTEX_DEBUG opt_global.h 586MUTEX_NOINLINE opt_global.h 587LOCK_PROFILING opt_global.h 588LOCK_PROFILING_FAST opt_global.h 589MSIZE opt_global.h 590REGRESSION opt_global.h 591RWLOCK_NOINLINE opt_global.h 592SX_NOINLINE opt_global.h 593VFS_BIO_DEBUG opt_global.h 594 595# These are VM related options 596VM_KMEM_SIZE opt_vm.h 597VM_KMEM_SIZE_SCALE opt_vm.h 598VM_KMEM_SIZE_MAX opt_vm.h 599VM_NDOMAIN opt_vm.h 600VM_NRESERVLEVEL opt_vm.h 601VM_LEVEL_0_ORDER opt_vm.h 602NO_SWAPPING opt_vm.h 603MALLOC_MAKE_FAILURES opt_vm.h 604MALLOC_PROFILE opt_vm.h 605MALLOC_DEBUG_MAXZONES opt_vm.h 606 607# The MemGuard replacement allocator used for tamper-after-free detection 608DEBUG_MEMGUARD opt_vm.h 609 610# The RedZone malloc(9) protection 611DEBUG_REDZONE opt_vm.h 612 613# Standard SMP options 614SMP opt_global.h 615 616# Size of the kernel message buffer 617MSGBUF_SIZE opt_msgbuf.h 618 619# NFS options 620NFS_MINATTRTIMO opt_nfs.h 621NFS_MAXATTRTIMO opt_nfs.h 622NFS_MINDIRATTRTIMO opt_nfs.h 623NFS_MAXDIRATTRTIMO opt_nfs.h 624NFS_GATHERDELAY opt_nfs.h 625NFS_WDELAYHASHSIZ opt_nfs.h 626NFS_DEBUG opt_nfs.h 627 628# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 629OVERRIDE_CARD opt_bktr.h 630OVERRIDE_TUNER opt_bktr.h 631OVERRIDE_DBX opt_bktr.h 632OVERRIDE_MSP opt_bktr.h 633BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 634BROOKTREE_ALLOC_PAGES opt_bktr.h 635BKTR_OVERRIDE_CARD opt_bktr.h 636BKTR_OVERRIDE_TUNER opt_bktr.h 637BKTR_OVERRIDE_DBX opt_bktr.h 638BKTR_OVERRIDE_MSP opt_bktr.h 639BKTR_SYSTEM_DEFAULT opt_bktr.h 640BKTR_ALLOC_PAGES opt_bktr.h 641BKTR_USE_PLL opt_bktr.h 642BKTR_GPIO_ACCESS opt_bktr.h 643BKTR_NO_MSP_RESET opt_bktr.h 644BKTR_430_FX_MODE opt_bktr.h 645BKTR_SIS_VIA_MODE opt_bktr.h 646BKTR_USE_FREEBSD_SMBUS opt_bktr.h 647BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 648 649# Options to support PPS 650UART_PPS_ON_CTS opt_uart.h 651 652# options for bus/device framework 653BUS_DEBUG opt_bus.h 654 655# options for USB support 656USB_DEBUG opt_usb.h 657USB_HOST_ALIGN opt_usb.h 658USB_REQ_DEBUG opt_usb.h 659USB_VERBOSE opt_usb.h 660USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 661U3G_DEBUG opt_u3g.h 662UKBD_DFLT_KEYMAP opt_ukbd.h 663UPLCOM_INTR_INTERVAL opt_uplcom.h 664UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 665UVSCOM_INTR_INTERVAL opt_uvscom.h 666 667# Embedded system options 668INIT_PATH 669 670ROOTDEVNAME 671 672FDC_DEBUG opt_fdc.h 673PCFCLOCK_VERBOSE opt_pcfclock.h 674PCFCLOCK_MAX_RETRIES opt_pcfclock.h 675 676KTR opt_global.h 677KTR_ALQ opt_ktr.h 678KTR_MASK opt_ktr.h 679KTR_CPUMASK opt_ktr.h 680KTR_COMPILE opt_global.h 681KTR_ENTRIES opt_global.h 682KTR_VERBOSE opt_ktr.h 683WITNESS opt_global.h 684WITNESS_KDB opt_witness.h 685WITNESS_SKIPSPIN opt_witness.h 686OPENSOLARIS_WITNESS opt_global.h 687 688# options for ACPI support 689ACPI_DEBUG opt_acpi.h 690ACPI_MAX_TASKS opt_acpi.h 691ACPI_MAX_THREADS opt_acpi.h 692 693# ISA support 694DEV_ISA opt_isa.h 695ISAPNP opt_isa.h 696 697# various 'device presence' options. 698DEV_BPF opt_bpf.h 699DEV_NETMAP opt_global.h 700DEV_MCA opt_mca.h 701DEV_CARP opt_carp.h 702DEV_SPLASH opt_splash.h 703 704# EISA support 705DEV_EISA opt_eisa.h 706EISA_SLOTS opt_eisa.h 707 708# ed driver 709ED_HPP opt_ed.h 710ED_3C503 opt_ed.h 711ED_SIC opt_ed.h 712 713# bce driver 714BCE_DEBUG opt_bce.h 715BCE_NVRAM_WRITE_SUPPORT opt_bce.h 716 717SOCKBUF_DEBUG opt_global.h 718 719 720# options for ubsec driver 721UBSEC_DEBUG opt_ubsec.h 722UBSEC_RNDTEST opt_ubsec.h 723UBSEC_NO_RNG opt_ubsec.h 724 725# options for hifn driver 726HIFN_DEBUG opt_hifn.h 727HIFN_RNDTEST opt_hifn.h 728 729# options for safenet driver 730SAFE_DEBUG opt_safe.h 731SAFE_NO_RNG opt_safe.h 732SAFE_RNDTEST opt_safe.h 733 734# syscons/vt options 735MAXCONS opt_syscons.h 736VT_FB_DEFAULT_WIDTH opt_syscons.h 737VT_FB_DEFAULT_HEIGHT opt_syscons.h 738SC_ALT_MOUSE_IMAGE opt_syscons.h 739SC_CUT_SPACES2TABS opt_syscons.h 740SC_CUT_SEPCHARS opt_syscons.h 741SC_DEBUG_LEVEL opt_syscons.h 742SC_DFLT_FONT opt_syscons.h 743SC_DISABLE_KDBKEY opt_syscons.h 744SC_DISABLE_REBOOT opt_syscons.h 745SC_HISTORY_SIZE opt_syscons.h 746SC_KERNEL_CONS_ATTR opt_syscons.h 747SC_KERNEL_CONS_REV_ATTR opt_syscons.h 748SC_MOUSE_CHAR opt_syscons.h 749SC_NO_CUTPASTE opt_syscons.h 750SC_NO_FONT_LOADING opt_syscons.h 751SC_NO_HISTORY opt_syscons.h 752SC_NO_MODE_CHANGE opt_syscons.h 753SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 754SC_NO_SYSMOUSE opt_syscons.h 755SC_NORM_ATTR opt_syscons.h 756SC_NORM_REV_ATTR opt_syscons.h 757SC_PIXEL_MODE opt_syscons.h 758SC_RENDER_DEBUG opt_syscons.h 759SC_TWOBUTTON_MOUSE opt_syscons.h 760DEV_SC opt_syscons.h 761DEV_VT opt_syscons.h 762 763 764# teken terminal emulator options 765TEKEN_CONS25 opt_teken.h 766TEKEN_UTF8 opt_teken.h 767 768# options for printf 769PRINTF_BUFR_SIZE opt_printf.h 770 771# kbd options 772KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 773KBD_INSTALL_CDEV opt_kbd.h 774KBD_MAXRETRY opt_kbd.h 775KBD_MAXWAIT opt_kbd.h 776KBD_RESETDELAY opt_kbd.h 777KBDIO_DEBUG opt_kbd.h 778 779# options for the Atheros driver 780ATH_DEBUG opt_ath.h 781ATH_TXBUF opt_ath.h 782ATH_RXBUF opt_ath.h 783ATH_DIAGAPI opt_ath.h 784ATH_TX99_DIAG opt_ath.h 785ATH_ENABLE_11N opt_ath.h 786ATH_ENABLE_DFS opt_ath.h 787 788# options for the Atheros hal 789AH_SUPPORT_AR5416 opt_ah.h 790# XXX For now, this breaks non-AR9130 chipsets, so only use it 791# XXX when actually targetting AR9130. 792AH_SUPPORT_AR9130 opt_ah.h 793 794AH_DEBUG opt_ah.h 795AH_ASSERT opt_ah.h 796AH_DEBUG_ALQ opt_ah.h 797AH_REGOPS_FUNC opt_ah.h 798AH_WRITE_REGDOMAIN opt_ah.h 799AH_DEBUG_COUNTRY opt_ah.h 800AH_WRITE_EEPROM opt_ah.h 801AH_PRIVATE_DIAG opt_ah.h 802AH_NEED_DESC_SWAP opt_ah.h 803AH_USE_INIPDGAIN opt_ah.h 804AH_MAXCHAN opt_ah.h 805AH_RXCFG_SDMAMW_4BYTES opt_ah.h 806 807# AR5416 and later interrupt mitigation 808# XXX do not use this for AR9130 809AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 810 811# options for the Broadcom BCM43xx driver (bwi) 812BWI_DEBUG opt_bwi.h 813BWI_DEBUG_VERBOSE opt_bwi.h 814 815# options for the Marvell 8335 wireless driver 816MALO_DEBUG opt_malo.h 817MALO_TXBUF opt_malo.h 818MALO_RXBUF opt_malo.h 819 820# options for the Marvell wireless driver 821MWL_DEBUG opt_mwl.h 822MWL_TXBUF opt_mwl.h 823MWL_RXBUF opt_mwl.h 824MWL_DIAGAPI opt_mwl.h 825MWL_AGGR_SIZE opt_mwl.h 826MWL_TX_NODROP opt_mwl.h 827 828# dcons options 829DCONS_BUF_SIZE opt_dcons.h 830DCONS_POLL_HZ opt_dcons.h 831DCONS_FORCE_CONSOLE opt_dcons.h 832DCONS_FORCE_GDB opt_dcons.h 833 834# HWPMC options 835HWPMC_HOOKS 836 837# XBOX options for FreeBSD/i386, but some files are MI 838XBOX opt_xbox.h 839 840# XFS 841XFS 842 843# Interrupt filtering 844INTR_FILTER 845 846# 802.11 support layer 847IEEE80211_DEBUG opt_wlan.h 848IEEE80211_DEBUG_REFCNT opt_wlan.h 849IEEE80211_AMPDU_AGE opt_wlan.h 850IEEE80211_SUPPORT_MESH opt_wlan.h 851IEEE80211_SUPPORT_SUPERG opt_wlan.h 852IEEE80211_SUPPORT_TDMA opt_wlan.h 853IEEE80211_ALQ opt_wlan.h 854 855# 802.11 TDMA support 856TDMA_SLOTLEN_DEFAULT opt_tdma.h 857TDMA_SLOTCNT_DEFAULT opt_tdma.h 858TDMA_BINTVAL_DEFAULT opt_tdma.h 859TDMA_TXRATE_11B_DEFAULT opt_tdma.h 860TDMA_TXRATE_11G_DEFAULT opt_tdma.h 861TDMA_TXRATE_11A_DEFAULT opt_tdma.h 862TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 863TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 864TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 865TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 866TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 867 868# Network stack virtualization options 869VIMAGE opt_global.h 870VNET_DEBUG opt_global.h 871 872# Common Flash Interface (CFI) options 873CFI_SUPPORT_STRATAFLASH opt_cfi.h 874CFI_ARMEDANDDANGEROUS opt_cfi.h 875 876# Sound options 877SND_DEBUG opt_snd.h 878SND_DIAGNOSTIC opt_snd.h 879SND_FEEDER_MULTIFORMAT opt_snd.h 880SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 881SND_FEEDER_RATE_HP opt_snd.h 882SND_PCM_64 opt_snd.h 883SND_OLDSTEREO opt_snd.h 884 885X86BIOS 886 887# Flattened device tree options 888FDT opt_platform.h 889FDT_DTB_STATIC opt_platform.h 890 891# OFED Infiniband stack 892OFED opt_ofed.h 893OFED_DEBUG_INIT opt_ofed.h 894SDP opt_ofed.h 895SDP_DEBUG opt_ofed.h 896IPOIB opt_ofed.h 897IPOIB_DEBUG opt_ofed.h 898IPOIB_CM opt_ofed.h 899 900# Resource Accounting 901RACCT opt_global.h 902 903# Resource Limits 904RCTL opt_global.h 905 906# At least one of the AR71XX ubiquiti boards has a Redboot configuration 907# that "lies" about the amount of RAM it has. Until a cleaner method is 908# defined, this option will suffice in overriding what Redboot says. 909AR71XX_REALMEM opt_global.h 910 911