1/*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2013 Chris Torek <torek @ torek net> 5 * All rights reserved. 6 * Copyright (c) 2019 Joyent, Inc. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD$"); 32 33#include <sys/param.h> 34#include <sys/uio.h> 35 36#include <machine/atomic.h> 37#include <machine/vmm_snapshot.h> 38 39#include <stdio.h> 40#include <stdint.h> 41#include <pthread.h> 42#include <pthread_np.h> 43 44#include "bhyverun.h" 45#include "debug.h" 46#include "pci_emul.h" 47#include "virtio.h" 48 49/* 50 * Functions for dealing with generalized "virtual devices" as 51 * defined by <https://www.google.com/#output=search&q=virtio+spec> 52 */ 53 54/* 55 * In case we decide to relax the "virtio softc comes at the 56 * front of virtio-based device softc" constraint, let's use 57 * this to convert. 58 */ 59#define DEV_SOFTC(vs) ((void *)(vs)) 60 61/* 62 * Link a virtio_softc to its constants, the device softc, and 63 * the PCI emulation. 64 */ 65void 66vi_softc_linkup(struct virtio_softc *vs, struct virtio_consts *vc, 67 void *dev_softc, struct pci_devinst *pi, 68 struct vqueue_info *queues) 69{ 70 int i; 71 72 /* vs and dev_softc addresses must match */ 73 assert((void *)vs == dev_softc); 74 vs->vs_vc = vc; 75 vs->vs_pi = pi; 76 pi->pi_arg = vs; 77 78 vs->vs_queues = queues; 79 for (i = 0; i < vc->vc_nvq; i++) { 80 queues[i].vq_vs = vs; 81 queues[i].vq_num = i; 82 } 83} 84 85/* 86 * Reset device (device-wide). This erases all queues, i.e., 87 * all the queues become invalid (though we don't wipe out the 88 * internal pointers, we just clear the VQ_ALLOC flag). 89 * 90 * It resets negotiated features to "none". 91 * 92 * If MSI-X is enabled, this also resets all the vectors to NO_VECTOR. 93 */ 94void 95vi_reset_dev(struct virtio_softc *vs) 96{ 97 struct vqueue_info *vq; 98 int i, nvq; 99 100 if (vs->vs_mtx) 101 assert(pthread_mutex_isowned_np(vs->vs_mtx)); 102 103 nvq = vs->vs_vc->vc_nvq; 104 for (vq = vs->vs_queues, i = 0; i < nvq; vq++, i++) { 105 vq->vq_flags = 0; 106 vq->vq_last_avail = 0; 107 vq->vq_next_used = 0; 108 vq->vq_save_used = 0; 109 vq->vq_pfn = 0; 110 vq->vq_msix_idx = VIRTIO_MSI_NO_VECTOR; 111 } 112 vs->vs_negotiated_caps = 0; 113 vs->vs_curq = 0; 114 /* vs->vs_status = 0; -- redundant */ 115 if (vs->vs_isr) 116 pci_lintr_deassert(vs->vs_pi); 117 vs->vs_isr = 0; 118 vs->vs_msix_cfg_idx = VIRTIO_MSI_NO_VECTOR; 119} 120 121/* 122 * Set I/O BAR (usually 0) to map PCI config registers. 123 */ 124void 125vi_set_io_bar(struct virtio_softc *vs, int barnum) 126{ 127 size_t size; 128 129 /* 130 * ??? should we use CFG0 if MSI-X is disabled? 131 * Existing code did not... 132 */ 133 size = VTCFG_R_CFG1 + vs->vs_vc->vc_cfgsize; 134 pci_emul_alloc_bar(vs->vs_pi, barnum, PCIBAR_IO, size); 135} 136 137/* 138 * Initialize MSI-X vector capabilities if we're to use MSI-X, 139 * or MSI capabilities if not. 140 * 141 * We assume we want one MSI-X vector per queue, here, plus one 142 * for the config vec. 143 */ 144int 145vi_intr_init(struct virtio_softc *vs, int barnum, int use_msix) 146{ 147 int nvec; 148 149 if (use_msix) { 150 vs->vs_flags |= VIRTIO_USE_MSIX; 151 VS_LOCK(vs); 152 vi_reset_dev(vs); /* set all vectors to NO_VECTOR */ 153 VS_UNLOCK(vs); 154 nvec = vs->vs_vc->vc_nvq + 1; 155 if (pci_emul_add_msixcap(vs->vs_pi, nvec, barnum)) 156 return (1); 157 } else 158 vs->vs_flags &= ~VIRTIO_USE_MSIX; 159 160 /* Only 1 MSI vector for bhyve */ 161 pci_emul_add_msicap(vs->vs_pi, 1); 162 163 /* Legacy interrupts are mandatory for virtio devices */ 164 pci_lintr_request(vs->vs_pi); 165 166 return (0); 167} 168 169/* 170 * Initialize the currently-selected virtio queue (vs->vs_curq). 171 * The guest just gave us a page frame number, from which we can 172 * calculate the addresses of the queue. 173 */ 174void 175vi_vq_init(struct virtio_softc *vs, uint32_t pfn) 176{ 177 struct vqueue_info *vq; 178 uint64_t phys; 179 size_t size; 180 char *base; 181 182 vq = &vs->vs_queues[vs->vs_curq]; 183 vq->vq_pfn = pfn; 184 phys = (uint64_t)pfn << VRING_PFN; 185 size = vring_size(vq->vq_qsize); 186 base = paddr_guest2host(vs->vs_pi->pi_vmctx, phys, size); 187 188 /* First page(s) are descriptors... */ 189 vq->vq_desc = (struct virtio_desc *)base; 190 base += vq->vq_qsize * sizeof(struct virtio_desc); 191 192 /* ... immediately followed by "avail" ring (entirely uint16_t's) */ 193 vq->vq_avail = (struct vring_avail *)base; 194 base += (2 + vq->vq_qsize + 1) * sizeof(uint16_t); 195 196 /* Then it's rounded up to the next page... */ 197 base = (char *)roundup2((uintptr_t)base, VRING_ALIGN); 198 199 /* ... and the last page(s) are the used ring. */ 200 vq->vq_used = (struct vring_used *)base; 201 202 /* Mark queue as allocated, and start at 0 when we use it. */ 203 vq->vq_flags = VQ_ALLOC; 204 vq->vq_last_avail = 0; 205 vq->vq_next_used = 0; 206 vq->vq_save_used = 0; 207} 208 209/* 210 * Helper inline for vq_getchain(): record the i'th "real" 211 * descriptor. 212 */ 213static inline void 214_vq_record(int i, volatile struct virtio_desc *vd, struct vmctx *ctx, 215 struct iovec *iov, int n_iov, uint16_t *flags) { 216 217 if (i >= n_iov) 218 return; 219 iov[i].iov_base = paddr_guest2host(ctx, vd->vd_addr, vd->vd_len); 220 iov[i].iov_len = vd->vd_len; 221 if (flags != NULL) 222 flags[i] = vd->vd_flags; 223} 224#define VQ_MAX_DESCRIPTORS 512 /* see below */ 225 226/* 227 * Examine the chain of descriptors starting at the "next one" to 228 * make sure that they describe a sensible request. If so, return 229 * the number of "real" descriptors that would be needed/used in 230 * acting on this request. This may be smaller than the number of 231 * available descriptors, e.g., if there are two available but 232 * they are two separate requests, this just returns 1. Or, it 233 * may be larger: if there are indirect descriptors involved, 234 * there may only be one descriptor available but it may be an 235 * indirect pointing to eight more. We return 8 in this case, 236 * i.e., we do not count the indirect descriptors, only the "real" 237 * ones. 238 * 239 * Basically, this vets the vd_flags and vd_next field of each 240 * descriptor and tells you how many are involved. Since some may 241 * be indirect, this also needs the vmctx (in the pci_devinst 242 * at vs->vs_pi) so that it can find indirect descriptors. 243 * 244 * As we process each descriptor, we copy and adjust it (guest to 245 * host address wise, also using the vmtctx) into the given iov[] 246 * array (of the given size). If the array overflows, we stop 247 * placing values into the array but keep processing descriptors, 248 * up to VQ_MAX_DESCRIPTORS, before giving up and returning -1. 249 * So you, the caller, must not assume that iov[] is as big as the 250 * return value (you can process the same thing twice to allocate 251 * a larger iov array if needed, or supply a zero length to find 252 * out how much space is needed). 253 * 254 * If you want to verify the WRITE flag on each descriptor, pass a 255 * non-NULL "flags" pointer to an array of "uint16_t" of the same size 256 * as n_iov and we'll copy each vd_flags field after unwinding any 257 * indirects. 258 * 259 * If some descriptor(s) are invalid, this prints a diagnostic message 260 * and returns -1. If no descriptors are ready now it simply returns 0. 261 * 262 * You are assumed to have done a vq_ring_ready() if needed (note 263 * that vq_has_descs() does one). 264 */ 265int 266vq_getchain(struct vqueue_info *vq, uint16_t *pidx, 267 struct iovec *iov, int n_iov, uint16_t *flags) 268{ 269 int i; 270 u_int ndesc, n_indir; 271 u_int idx, next; 272 volatile struct virtio_desc *vdir, *vindir, *vp; 273 struct vmctx *ctx; 274 struct virtio_softc *vs; 275 const char *name; 276 277 vs = vq->vq_vs; 278 name = vs->vs_vc->vc_name; 279 280 /* 281 * Note: it's the responsibility of the guest not to 282 * update vq->vq_avail->va_idx until all of the descriptors 283 * the guest has written are valid (including all their 284 * vd_next fields and vd_flags). 285 * 286 * Compute (va_idx - last_avail) in integers mod 2**16. This is 287 * the number of descriptors the device has made available 288 * since the last time we updated vq->vq_last_avail. 289 * 290 * We just need to do the subtraction as an unsigned int, 291 * then trim off excess bits. 292 */ 293 idx = vq->vq_last_avail; 294 ndesc = (uint16_t)((u_int)vq->vq_avail->va_idx - idx); 295 if (ndesc == 0) 296 return (0); 297 if (ndesc > vq->vq_qsize) { 298 /* XXX need better way to diagnose issues */ 299 EPRINTLN( 300 "%s: ndesc (%u) out of range, driver confused?", 301 name, (u_int)ndesc); 302 return (-1); 303 } 304 305 /* 306 * Now count/parse "involved" descriptors starting from 307 * the head of the chain. 308 * 309 * To prevent loops, we could be more complicated and 310 * check whether we're re-visiting a previously visited 311 * index, but we just abort if the count gets excessive. 312 */ 313 ctx = vs->vs_pi->pi_vmctx; 314 *pidx = next = vq->vq_avail->va_ring[idx & (vq->vq_qsize - 1)]; 315 vq->vq_last_avail++; 316 for (i = 0; i < VQ_MAX_DESCRIPTORS; next = vdir->vd_next) { 317 if (next >= vq->vq_qsize) { 318 EPRINTLN( 319 "%s: descriptor index %u out of range, " 320 "driver confused?", 321 name, next); 322 return (-1); 323 } 324 vdir = &vq->vq_desc[next]; 325 if ((vdir->vd_flags & VRING_DESC_F_INDIRECT) == 0) { 326 _vq_record(i, vdir, ctx, iov, n_iov, flags); 327 i++; 328 } else if ((vs->vs_vc->vc_hv_caps & 329 VIRTIO_RING_F_INDIRECT_DESC) == 0) { 330 EPRINTLN( 331 "%s: descriptor has forbidden INDIRECT flag, " 332 "driver confused?", 333 name); 334 return (-1); 335 } else { 336 n_indir = vdir->vd_len / 16; 337 if ((vdir->vd_len & 0xf) || n_indir == 0) { 338 EPRINTLN( 339 "%s: invalid indir len 0x%x, " 340 "driver confused?", 341 name, (u_int)vdir->vd_len); 342 return (-1); 343 } 344 vindir = paddr_guest2host(ctx, 345 vdir->vd_addr, vdir->vd_len); 346 /* 347 * Indirects start at the 0th, then follow 348 * their own embedded "next"s until those run 349 * out. Each one's indirect flag must be off 350 * (we don't really have to check, could just 351 * ignore errors...). 352 */ 353 next = 0; 354 for (;;) { 355 vp = &vindir[next]; 356 if (vp->vd_flags & VRING_DESC_F_INDIRECT) { 357 EPRINTLN( 358 "%s: indirect desc has INDIR flag," 359 " driver confused?", 360 name); 361 return (-1); 362 } 363 _vq_record(i, vp, ctx, iov, n_iov, flags); 364 if (++i > VQ_MAX_DESCRIPTORS) 365 goto loopy; 366 if ((vp->vd_flags & VRING_DESC_F_NEXT) == 0) 367 break; 368 next = vp->vd_next; 369 if (next >= n_indir) { 370 EPRINTLN( 371 "%s: invalid next %u > %u, " 372 "driver confused?", 373 name, (u_int)next, n_indir); 374 return (-1); 375 } 376 } 377 } 378 if ((vdir->vd_flags & VRING_DESC_F_NEXT) == 0) 379 return (i); 380 } 381loopy: 382 EPRINTLN( 383 "%s: descriptor loop? count > %d - driver confused?", 384 name, i); 385 return (-1); 386} 387 388/* 389 * Return the first n_chain request chains back to the available queue. 390 * 391 * (These chains are the ones you handled when you called vq_getchain() 392 * and used its positive return value.) 393 */ 394void 395vq_retchains(struct vqueue_info *vq, uint16_t n_chains) 396{ 397 398 vq->vq_last_avail -= n_chains; 399} 400 401void 402vq_relchain_prepare(struct vqueue_info *vq, uint16_t idx, uint32_t iolen) 403{ 404 volatile struct vring_used *vuh; 405 volatile struct virtio_used *vue; 406 uint16_t mask; 407 408 /* 409 * Notes: 410 * - mask is N-1 where N is a power of 2 so computes x % N 411 * - vuh points to the "used" data shared with guest 412 * - vue points to the "used" ring entry we want to update 413 * 414 * (I apologize for the two fields named vu_idx; the 415 * virtio spec calls the one that vue points to, "id"...) 416 */ 417 mask = vq->vq_qsize - 1; 418 vuh = vq->vq_used; 419 420 vue = &vuh->vu_ring[vq->vq_next_used++ & mask]; 421 vue->vu_idx = idx; 422 vue->vu_tlen = iolen; 423} 424 425void 426vq_relchain_publish(struct vqueue_info *vq) 427{ 428 /* 429 * Ensure the used descriptor is visible before updating the index. 430 * This is necessary on ISAs with memory ordering less strict than x86 431 * (and even on x86 to act as a compiler barrier). 432 */ 433 atomic_thread_fence_rel(); 434 vq->vq_used->vu_idx = vq->vq_next_used; 435} 436 437/* 438 * Return specified request chain to the guest, setting its I/O length 439 * to the provided value. 440 * 441 * (This chain is the one you handled when you called vq_getchain() 442 * and used its positive return value.) 443 */ 444void 445vq_relchain(struct vqueue_info *vq, uint16_t idx, uint32_t iolen) 446{ 447 vq_relchain_prepare(vq, idx, iolen); 448 vq_relchain_publish(vq); 449} 450 451/* 452 * Driver has finished processing "available" chains and calling 453 * vq_relchain on each one. If driver used all the available 454 * chains, used_all should be set. 455 * 456 * If the "used" index moved we may need to inform the guest, i.e., 457 * deliver an interrupt. Even if the used index did NOT move we 458 * may need to deliver an interrupt, if the avail ring is empty and 459 * we are supposed to interrupt on empty. 460 * 461 * Note that used_all_avail is provided by the caller because it's 462 * a snapshot of the ring state when he decided to finish interrupt 463 * processing -- it's possible that descriptors became available after 464 * that point. (It's also typically a constant 1/True as well.) 465 */ 466void 467vq_endchains(struct vqueue_info *vq, int used_all_avail) 468{ 469 struct virtio_softc *vs; 470 uint16_t event_idx, new_idx, old_idx; 471 int intr; 472 473 /* 474 * Interrupt generation: if we're using EVENT_IDX, 475 * interrupt if we've crossed the event threshold. 476 * Otherwise interrupt is generated if we added "used" entries, 477 * but suppressed by VRING_AVAIL_F_NO_INTERRUPT. 478 * 479 * In any case, though, if NOTIFY_ON_EMPTY is set and the 480 * entire avail was processed, we need to interrupt always. 481 */ 482 vs = vq->vq_vs; 483 old_idx = vq->vq_save_used; 484 vq->vq_save_used = new_idx = vq->vq_used->vu_idx; 485 486 /* 487 * Use full memory barrier between vu_idx store from preceding 488 * vq_relchain() call and the loads from VQ_USED_EVENT_IDX() or 489 * va_flags below. 490 */ 491 atomic_thread_fence_seq_cst(); 492 if (used_all_avail && 493 (vs->vs_negotiated_caps & VIRTIO_F_NOTIFY_ON_EMPTY)) 494 intr = 1; 495 else if (vs->vs_negotiated_caps & VIRTIO_RING_F_EVENT_IDX) { 496 event_idx = VQ_USED_EVENT_IDX(vq); 497 /* 498 * This calculation is per docs and the kernel 499 * (see src/sys/dev/virtio/virtio_ring.h). 500 */ 501 intr = (uint16_t)(new_idx - event_idx - 1) < 502 (uint16_t)(new_idx - old_idx); 503 } else { 504 intr = new_idx != old_idx && 505 !(vq->vq_avail->va_flags & VRING_AVAIL_F_NO_INTERRUPT); 506 } 507 if (intr) 508 vq_interrupt(vs, vq); 509} 510 511/* Note: these are in sorted order to make for a fast search */ 512static struct config_reg { 513 uint16_t cr_offset; /* register offset */ 514 uint8_t cr_size; /* size (bytes) */ 515 uint8_t cr_ro; /* true => reg is read only */ 516 const char *cr_name; /* name of reg */ 517} config_regs[] = { 518 { VTCFG_R_HOSTCAP, 4, 1, "HOSTCAP" }, 519 { VTCFG_R_GUESTCAP, 4, 0, "GUESTCAP" }, 520 { VTCFG_R_PFN, 4, 0, "PFN" }, 521 { VTCFG_R_QNUM, 2, 1, "QNUM" }, 522 { VTCFG_R_QSEL, 2, 0, "QSEL" }, 523 { VTCFG_R_QNOTIFY, 2, 0, "QNOTIFY" }, 524 { VTCFG_R_STATUS, 1, 0, "STATUS" }, 525 { VTCFG_R_ISR, 1, 0, "ISR" }, 526 { VTCFG_R_CFGVEC, 2, 0, "CFGVEC" }, 527 { VTCFG_R_QVEC, 2, 0, "QVEC" }, 528}; 529 530static inline struct config_reg * 531vi_find_cr(int offset) { 532 u_int hi, lo, mid; 533 struct config_reg *cr; 534 535 lo = 0; 536 hi = sizeof(config_regs) / sizeof(*config_regs) - 1; 537 while (hi >= lo) { 538 mid = (hi + lo) >> 1; 539 cr = &config_regs[mid]; 540 if (cr->cr_offset == offset) 541 return (cr); 542 if (cr->cr_offset < offset) 543 lo = mid + 1; 544 else 545 hi = mid - 1; 546 } 547 return (NULL); 548} 549 550/* 551 * Handle pci config space reads. 552 * If it's to the MSI-X info, do that. 553 * If it's part of the virtio standard stuff, do that. 554 * Otherwise dispatch to the actual driver. 555 */ 556uint64_t 557vi_pci_read(struct vmctx *ctx, int vcpu, struct pci_devinst *pi, 558 int baridx, uint64_t offset, int size) 559{ 560 struct virtio_softc *vs = pi->pi_arg; 561 struct virtio_consts *vc; 562 struct config_reg *cr; 563 uint64_t virtio_config_size, max; 564 const char *name; 565 uint32_t newoff; 566 uint32_t value; 567 int error; 568 569 if (vs->vs_flags & VIRTIO_USE_MSIX) { 570 if (baridx == pci_msix_table_bar(pi) || 571 baridx == pci_msix_pba_bar(pi)) { 572 return (pci_emul_msix_tread(pi, offset, size)); 573 } 574 } 575 576 /* XXX probably should do something better than just assert() */ 577 assert(baridx == 0); 578 579 if (vs->vs_mtx) 580 pthread_mutex_lock(vs->vs_mtx); 581 582 vc = vs->vs_vc; 583 name = vc->vc_name; 584 value = size == 1 ? 0xff : size == 2 ? 0xffff : 0xffffffff; 585 586 if (size != 1 && size != 2 && size != 4) 587 goto bad; 588 589 if (pci_msix_enabled(pi)) 590 virtio_config_size = VTCFG_R_CFG1; 591 else 592 virtio_config_size = VTCFG_R_CFG0; 593 594 if (offset >= virtio_config_size) { 595 /* 596 * Subtract off the standard size (including MSI-X 597 * registers if enabled) and dispatch to underlying driver. 598 * If that fails, fall into general code. 599 */ 600 newoff = offset - virtio_config_size; 601 max = vc->vc_cfgsize ? vc->vc_cfgsize : 0x100000000; 602 if (newoff + size > max) 603 goto bad; 604 error = (*vc->vc_cfgread)(DEV_SOFTC(vs), newoff, size, &value); 605 if (!error) 606 goto done; 607 } 608 609bad: 610 cr = vi_find_cr(offset); 611 if (cr == NULL || cr->cr_size != size) { 612 if (cr != NULL) { 613 /* offset must be OK, so size must be bad */ 614 EPRINTLN( 615 "%s: read from %s: bad size %d", 616 name, cr->cr_name, size); 617 } else { 618 EPRINTLN( 619 "%s: read from bad offset/size %jd/%d", 620 name, (uintmax_t)offset, size); 621 } 622 goto done; 623 } 624 625 switch (offset) { 626 case VTCFG_R_HOSTCAP: 627 value = vc->vc_hv_caps; 628 break; 629 case VTCFG_R_GUESTCAP: 630 value = vs->vs_negotiated_caps; 631 break; 632 case VTCFG_R_PFN: 633 if (vs->vs_curq < vc->vc_nvq) 634 value = vs->vs_queues[vs->vs_curq].vq_pfn; 635 break; 636 case VTCFG_R_QNUM: 637 value = vs->vs_curq < vc->vc_nvq ? 638 vs->vs_queues[vs->vs_curq].vq_qsize : 0; 639 break; 640 case VTCFG_R_QSEL: 641 value = vs->vs_curq; 642 break; 643 case VTCFG_R_QNOTIFY: 644 value = 0; /* XXX */ 645 break; 646 case VTCFG_R_STATUS: 647 value = vs->vs_status; 648 break; 649 case VTCFG_R_ISR: 650 value = vs->vs_isr; 651 vs->vs_isr = 0; /* a read clears this flag */ 652 if (value) 653 pci_lintr_deassert(pi); 654 break; 655 case VTCFG_R_CFGVEC: 656 value = vs->vs_msix_cfg_idx; 657 break; 658 case VTCFG_R_QVEC: 659 value = vs->vs_curq < vc->vc_nvq ? 660 vs->vs_queues[vs->vs_curq].vq_msix_idx : 661 VIRTIO_MSI_NO_VECTOR; 662 break; 663 } 664done: 665 if (vs->vs_mtx) 666 pthread_mutex_unlock(vs->vs_mtx); 667 return (value); 668} 669 670/* 671 * Handle pci config space writes. 672 * If it's to the MSI-X info, do that. 673 * If it's part of the virtio standard stuff, do that. 674 * Otherwise dispatch to the actual driver. 675 */ 676void 677vi_pci_write(struct vmctx *ctx, int vcpu, struct pci_devinst *pi, 678 int baridx, uint64_t offset, int size, uint64_t value) 679{ 680 struct virtio_softc *vs = pi->pi_arg; 681 struct vqueue_info *vq; 682 struct virtio_consts *vc; 683 struct config_reg *cr; 684 uint64_t virtio_config_size, max; 685 const char *name; 686 uint32_t newoff; 687 int error; 688 689 if (vs->vs_flags & VIRTIO_USE_MSIX) { 690 if (baridx == pci_msix_table_bar(pi) || 691 baridx == pci_msix_pba_bar(pi)) { 692 pci_emul_msix_twrite(pi, offset, size, value); 693 return; 694 } 695 } 696 697 /* XXX probably should do something better than just assert() */ 698 assert(baridx == 0); 699 700 if (vs->vs_mtx) 701 pthread_mutex_lock(vs->vs_mtx); 702 703 vc = vs->vs_vc; 704 name = vc->vc_name; 705 706 if (size != 1 && size != 2 && size != 4) 707 goto bad; 708 709 if (pci_msix_enabled(pi)) 710 virtio_config_size = VTCFG_R_CFG1; 711 else 712 virtio_config_size = VTCFG_R_CFG0; 713 714 if (offset >= virtio_config_size) { 715 /* 716 * Subtract off the standard size (including MSI-X 717 * registers if enabled) and dispatch to underlying driver. 718 */ 719 newoff = offset - virtio_config_size; 720 max = vc->vc_cfgsize ? vc->vc_cfgsize : 0x100000000; 721 if (newoff + size > max) 722 goto bad; 723 error = (*vc->vc_cfgwrite)(DEV_SOFTC(vs), newoff, size, value); 724 if (!error) 725 goto done; 726 } 727 728bad: 729 cr = vi_find_cr(offset); 730 if (cr == NULL || cr->cr_size != size || cr->cr_ro) { 731 if (cr != NULL) { 732 /* offset must be OK, wrong size and/or reg is R/O */ 733 if (cr->cr_size != size) 734 EPRINTLN( 735 "%s: write to %s: bad size %d", 736 name, cr->cr_name, size); 737 if (cr->cr_ro) 738 EPRINTLN( 739 "%s: write to read-only reg %s", 740 name, cr->cr_name); 741 } else { 742 EPRINTLN( 743 "%s: write to bad offset/size %jd/%d", 744 name, (uintmax_t)offset, size); 745 } 746 goto done; 747 } 748 749 switch (offset) { 750 case VTCFG_R_GUESTCAP: 751 vs->vs_negotiated_caps = value & vc->vc_hv_caps; 752 if (vc->vc_apply_features) 753 (*vc->vc_apply_features)(DEV_SOFTC(vs), 754 vs->vs_negotiated_caps); 755 break; 756 case VTCFG_R_PFN: 757 if (vs->vs_curq >= vc->vc_nvq) 758 goto bad_qindex; 759 vi_vq_init(vs, value); 760 break; 761 case VTCFG_R_QSEL: 762 /* 763 * Note that the guest is allowed to select an 764 * invalid queue; we just need to return a QNUM 765 * of 0 while the bad queue is selected. 766 */ 767 vs->vs_curq = value; 768 break; 769 case VTCFG_R_QNOTIFY: 770 if (value >= vc->vc_nvq) { 771 EPRINTLN("%s: queue %d notify out of range", 772 name, (int)value); 773 goto done; 774 } 775 vq = &vs->vs_queues[value]; 776 if (vq->vq_notify) 777 (*vq->vq_notify)(DEV_SOFTC(vs), vq); 778 else if (vc->vc_qnotify) 779 (*vc->vc_qnotify)(DEV_SOFTC(vs), vq); 780 else 781 EPRINTLN( 782 "%s: qnotify queue %d: missing vq/vc notify", 783 name, (int)value); 784 break; 785 case VTCFG_R_STATUS: 786 vs->vs_status = value; 787 if (value == 0) 788 (*vc->vc_reset)(DEV_SOFTC(vs)); 789 break; 790 case VTCFG_R_CFGVEC: 791 vs->vs_msix_cfg_idx = value; 792 break; 793 case VTCFG_R_QVEC: 794 if (vs->vs_curq >= vc->vc_nvq) 795 goto bad_qindex; 796 vq = &vs->vs_queues[vs->vs_curq]; 797 vq->vq_msix_idx = value; 798 break; 799 } 800 goto done; 801 802bad_qindex: 803 EPRINTLN( 804 "%s: write config reg %s: curq %d >= max %d", 805 name, cr->cr_name, vs->vs_curq, vc->vc_nvq); 806done: 807 if (vs->vs_mtx) 808 pthread_mutex_unlock(vs->vs_mtx); 809} 810 811#ifdef BHYVE_SNAPSHOT 812int 813vi_pci_pause(struct vmctx *ctx, struct pci_devinst *pi) 814{ 815 struct virtio_softc *vs; 816 struct virtio_consts *vc; 817 818 vs = pi->pi_arg; 819 vc = vs->vs_vc; 820 821 vc = vs->vs_vc; 822 assert(vc->vc_pause != NULL); 823 (*vc->vc_pause)(DEV_SOFTC(vs)); 824 825 return (0); 826} 827 828int 829vi_pci_resume(struct vmctx *ctx, struct pci_devinst *pi) 830{ 831 struct virtio_softc *vs; 832 struct virtio_consts *vc; 833 834 vs = pi->pi_arg; 835 vc = vs->vs_vc; 836 837 vc = vs->vs_vc; 838 assert(vc->vc_resume != NULL); 839 (*vc->vc_resume)(DEV_SOFTC(vs)); 840 841 return (0); 842} 843 844static int 845vi_pci_snapshot_softc(struct virtio_softc *vs, struct vm_snapshot_meta *meta) 846{ 847 int ret; 848 849 SNAPSHOT_VAR_OR_LEAVE(vs->vs_flags, meta, ret, done); 850 SNAPSHOT_VAR_OR_LEAVE(vs->vs_negotiated_caps, meta, ret, done); 851 SNAPSHOT_VAR_OR_LEAVE(vs->vs_curq, meta, ret, done); 852 SNAPSHOT_VAR_OR_LEAVE(vs->vs_status, meta, ret, done); 853 SNAPSHOT_VAR_OR_LEAVE(vs->vs_isr, meta, ret, done); 854 SNAPSHOT_VAR_OR_LEAVE(vs->vs_msix_cfg_idx, meta, ret, done); 855 856done: 857 return (ret); 858} 859 860static int 861vi_pci_snapshot_consts(struct virtio_consts *vc, struct vm_snapshot_meta *meta) 862{ 863 int ret; 864 865 SNAPSHOT_VAR_CMP_OR_LEAVE(vc->vc_nvq, meta, ret, done); 866 SNAPSHOT_VAR_CMP_OR_LEAVE(vc->vc_cfgsize, meta, ret, done); 867 SNAPSHOT_VAR_CMP_OR_LEAVE(vc->vc_hv_caps, meta, ret, done); 868 869done: 870 return (ret); 871} 872 873static int 874vi_pci_snapshot_queues(struct virtio_softc *vs, struct vm_snapshot_meta *meta) 875{ 876 int i; 877 int ret; 878 struct virtio_consts *vc; 879 struct vqueue_info *vq; 880 uint64_t addr_size; 881 882 vc = vs->vs_vc; 883 884 /* Save virtio queue info */ 885 for (i = 0; i < vc->vc_nvq; i++) { 886 vq = &vs->vs_queues[i]; 887 888 SNAPSHOT_VAR_CMP_OR_LEAVE(vq->vq_qsize, meta, ret, done); 889 SNAPSHOT_VAR_CMP_OR_LEAVE(vq->vq_num, meta, ret, done); 890 891 SNAPSHOT_VAR_OR_LEAVE(vq->vq_flags, meta, ret, done); 892 SNAPSHOT_VAR_OR_LEAVE(vq->vq_last_avail, meta, ret, done); 893 SNAPSHOT_VAR_OR_LEAVE(vq->vq_next_used, meta, ret, done); 894 SNAPSHOT_VAR_OR_LEAVE(vq->vq_save_used, meta, ret, done); 895 SNAPSHOT_VAR_OR_LEAVE(vq->vq_msix_idx, meta, ret, done); 896 897 SNAPSHOT_VAR_OR_LEAVE(vq->vq_pfn, meta, ret, done); 898 899 addr_size = vq->vq_qsize * sizeof(struct virtio_desc); 900 SNAPSHOT_GUEST2HOST_ADDR_OR_LEAVE(vq->vq_desc, addr_size, 901 false, meta, ret, done); 902 903 addr_size = (2 + vq->vq_qsize + 1) * sizeof(uint16_t); 904 SNAPSHOT_GUEST2HOST_ADDR_OR_LEAVE(vq->vq_avail, addr_size, 905 false, meta, ret, done); 906 907 addr_size = (2 + 2 * vq->vq_qsize + 1) * sizeof(uint16_t); 908 SNAPSHOT_GUEST2HOST_ADDR_OR_LEAVE(vq->vq_used, addr_size, 909 false, meta, ret, done); 910 911 SNAPSHOT_BUF_OR_LEAVE(vq->vq_desc, vring_size(vq->vq_qsize), 912 meta, ret, done); 913 } 914 915done: 916 return (ret); 917} 918 919int 920vi_pci_snapshot(struct vm_snapshot_meta *meta) 921{ 922 int ret; 923 struct pci_devinst *pi; 924 struct virtio_softc *vs; 925 struct virtio_consts *vc; 926 927 pi = meta->dev_data; 928 vs = pi->pi_arg; 929 vc = vs->vs_vc; 930 931 /* Save virtio softc */ 932 ret = vi_pci_snapshot_softc(vs, meta); 933 if (ret != 0) 934 goto done; 935 936 /* Save virtio consts */ 937 ret = vi_pci_snapshot_consts(vc, meta); 938 if (ret != 0) 939 goto done; 940 941 /* Save virtio queue info */ 942 ret = vi_pci_snapshot_queues(vs, meta); 943 if (ret != 0) 944 goto done; 945 946 /* Save device softc, if needed */ 947 if (vc->vc_snapshot != NULL) { 948 ret = (*vc->vc_snapshot)(DEV_SOFTC(vs), meta); 949 if (ret != 0) 950 goto done; 951 } 952 953done: 954 return (ret); 955} 956#endif 957