1# 2# This file adds to the values in AR933X_BASE.hints. 3# 4# $FreeBSD$ 5 6# mdiobus on arge1 7hint.argemdio.0.at="nexus0" 8hint.argemdio.0.maddr=0x1a000000 9hint.argemdio.0.msize=0x1000 10hint.argemdio.0.order=0 11 12# Embedded Atheros Switch 13hint.arswitch.0.at="mdio0" 14 15# XXX this should really say it's an AR933x switch, as there 16# are some vlan specific differences here! 17hint.arswitch.0.is_7240=1 18hint.arswitch.0.numphys=4 19hint.arswitch.0.phy4cpu=1 # phy 4 is a "CPU" separate PHY 20hint.arswitch.0.is_rgmii=0 21hint.arswitch.0.is_gmii=1 # arge1 <-> switch PHY is GMII 22 23# arge0 - MII, autoneg, phy(4) 24hint.arge.0.phymask=0x10 # PHY4 25hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus 26hint.arge.0.eeprommac=0x1fff0000 27 28# arge1 - GMII, 1000/full 29hint.arge.1.phymask=0x0 # No directly mapped PHYs 30hint.arge.1.media=1000 31hint.arge.1.fduplex=1 32hint.arge.1.eeprommac=0x1fff0006 33 34# ath0 35hint.ath.0.eepromaddr=0x1fff0000 36hint.ath.0.eepromsize=16384 37 38# 16MB flash layout: 39# [ 0.510000] 5 tp-link partitions found on MTD device spi0.0 40# [ 0.510000] Creating 5 MTD partitions on "spi0.0": 41# [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" 42# [ 0.520000] 0x000000020000-0x000000136468 : "kernel" 43# [ 0.530000] 0x000000136468-0x000000ff0000 : "rootfs" 44# [ 0.530000] mtd: device 2 (rootfs) set to be root filesystem 45# [ 0.540000] 1 squashfs-split partitions found on MTD device rootfs 46# [ 0.540000] 0x000000730000-0x000000fe0000 : "rootfs_data" 47# [ 0.540000] 0x000000fe0000-0x000000ff0000 : "nvram" 48# [ 0.550000] 0x000000ff0000-0x000001000000 : "art" 49# [ 0.560000] 0x000000020000-0x000000fe0000 : "firmware" 50 51# 64KiB uboot 52hint.map.0.at="flash/spi0" 53hint.map.0.start=0x00000000 54hint.map.0.end=0x00010000 55hint.map.0.name="u-boot" 56hint.map.0.readonly=1 57 58# 64KiB uboot 59hint.map.1.at="flash/spi0" 60hint.map.1.start=0x00010000 61hint.map.1.end=0x00020000 62hint.map.1.name="uboot-env" 63hint.map.1.readonly=1 64 65# kernel 66hint.map.2.at="flash/spi0" 67hint.map.2.start=0x00020000 68hint.map.2.end="search:0x00020000:0x10000:.!/bin/sh" 69hint.map.2.name="kernel" 70hint.map.2.readonly=1 71 72# rootfs ulzma 73hint.map.3.at="flash/spi0" 74hint.map.3.start="search:0x00020000:0x10000:.!/bin/sh" 75hint.map.3.end=0x00fe0000 76hint.map.3.name="rootfs" 77hint.map.3.readonly=1 78 79# 64KiB cfg 80hint.map.4.at="flash/spi0" 81hint.map.4.start=0x00fe0000 82hint.map.4.end=0x00ff0000 83hint.map.4.name="cfg" 84hint.map.4.readonly=0 85 86# all firmware 16000KiB 87hint.map.5.at="flash/spi0" 88hint.map.5.start=0x00020000 89hint.map.5.end=0x00ff0000 90hint.map.5.name="firmware" 91hint.map.5.readonly=0 92 93# 64KiB ART 94hint.map.6.at="flash/spi0" 95hint.map.6.start=0x00ff0000 96hint.map.6.end=0x01000000 97hint.map.6.name="ART" 98hint.map.6.readonly=1 99 100# GPIO 101hint.gpio.0.pinmask=0x0c8ff1c3 102 103hint.gpioled.0.at="gpiobus0" 104hint.gpioled.0.pins=0x08000000 105hint.gpioled.0.name="board" 106hint.gpioled.0.invert=0 107 108#Red 109hint.gpioled.1.at="gpiobus0" 110hint.gpioled.1.pins=0x00020000 111hint.gpioled.1.name="red" 112hint.gpioled.1.invert=0 113 114#Green 115hint.gpioled.2.at="gpiobus0" 116hint.gpioled.2.pins=0x00010000 117hint.gpioled.2.name="green" 118hint.gpioled.2.invert=0 119 120#Blue 121hint.gpioled.3.at="gpiobus0" 122hint.gpioled.3.pins=0x00008000 123hint.gpioled.3.name="blue" 124hint.gpioled.3.invert=0 125 126# I2C 127# 0x20 - 0x27 = Relay Controllers (0x27 is default) 128# 0x5a = PWM/Servo Controller 129hint.gpioiic.0.at="gpiobus0" 130hint.gpioiic.0.pins=0x300000 # pins 20 and 21 131hint.gpioiic.0.scl=0 # pin 20 132hint.gpioiic.0.sda=1 # pin 21 133