1/*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35#include <sys/cdefs.h> 36__FBSDID("$FreeBSD$"); 37 38/* 39 * 3Com 3c90x Etherlink XL PCI NIC driver 40 * 41 * Supports the 3Com "boomerang", "cyclone" and "hurricane" PCI 42 * bus-master chips (3c90x cards and embedded controllers) including 43 * the following: 44 * 45 * 3Com 3c900-TPO 10Mbps/RJ-45 46 * 3Com 3c900-COMBO 10Mbps/RJ-45,AUI,BNC 47 * 3Com 3c905-TX 10/100Mbps/RJ-45 48 * 3Com 3c905-T4 10/100Mbps/RJ-45 49 * 3Com 3c900B-TPO 10Mbps/RJ-45 50 * 3Com 3c900B-COMBO 10Mbps/RJ-45,AUI,BNC 51 * 3Com 3c900B-TPC 10Mbps/RJ-45,BNC 52 * 3Com 3c900B-FL 10Mbps/Fiber-optic 53 * 3Com 3c905B-COMBO 10/100Mbps/RJ-45,AUI,BNC 54 * 3Com 3c905B-TX 10/100Mbps/RJ-45 55 * 3Com 3c905B-FL/FX 10/100Mbps/Fiber-optic 56 * 3Com 3c905C-TX 10/100Mbps/RJ-45 (Tornado ASIC) 57 * 3Com 3c980-TX 10/100Mbps server adapter (Hurricane ASIC) 58 * 3Com 3c980C-TX 10/100Mbps server adapter (Tornado ASIC) 59 * 3Com 3cSOHO100-TX 10/100Mbps/RJ-45 (Hurricane ASIC) 60 * 3Com 3c450-TX 10/100Mbps/RJ-45 (Tornado ASIC) 61 * 3Com 3c555 10/100Mbps/RJ-45 (MiniPCI, Laptop Hurricane) 62 * 3Com 3c556 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC) 63 * 3Com 3c556B 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC) 64 * 3Com 3c575TX 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 65 * 3Com 3c575B 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 66 * 3Com 3c575C 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 67 * 3Com 3cxfem656 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 68 * 3Com 3cxfem656b 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 69 * 3Com 3cxfem656c 10/100Mbps/RJ-45 (Cardbus, Tornado ASIC) 70 * Dell Optiplex GX1 on-board 3c918 10/100Mbps/RJ-45 71 * Dell on-board 3c920 10/100Mbps/RJ-45 72 * Dell Precision on-board 3c905B 10/100Mbps/RJ-45 73 * Dell Latitude laptop docking station embedded 3c905-TX 74 * 75 * Written by Bill Paul <wpaul@ctr.columbia.edu> 76 * Electrical Engineering Department 77 * Columbia University, New York City 78 */ 79/* 80 * The 3c90x series chips use a bus-master DMA interface for transferring 81 * packets to and from the controller chip. Some of the "vortex" cards 82 * (3c59x) also supported a bus master mode, however for those chips 83 * you could only DMA packets to/from a contiguous memory buffer. For 84 * transmission this would mean copying the contents of the queued mbuf 85 * chain into an mbuf cluster and then DMAing the cluster. This extra 86 * copy would sort of defeat the purpose of the bus master support for 87 * any packet that doesn't fit into a single mbuf. 88 * 89 * By contrast, the 3c90x cards support a fragment-based bus master 90 * mode where mbuf chains can be encapsulated using TX descriptors. 91 * This is similar to other PCI chips such as the Texas Instruments 92 * ThunderLAN and the Intel 82557/82558. 93 * 94 * The "vortex" driver (if_vx.c) happens to work for the "boomerang" 95 * bus master chips because they maintain the old PIO interface for 96 * backwards compatibility, but starting with the 3c905B and the 97 * "cyclone" chips, the compatibility interface has been dropped. 98 * Since using bus master DMA is a big win, we use this driver to 99 * support the PCI "boomerang" chips even though they work with the 100 * "vortex" driver in order to obtain better performance. 101 */ 102 103#ifdef HAVE_KERNEL_OPTION_HEADERS 104#include "opt_device_polling.h" 105#endif 106 107#include <sys/param.h> 108#include <sys/systm.h> 109#include <sys/sockio.h> 110#include <sys/endian.h> 111#include <sys/kernel.h> 112#include <sys/malloc.h> 113#include <sys/mbuf.h> 114#include <sys/module.h> 115#include <sys/socket.h> 116#include <sys/taskqueue.h> 117 118#include <net/if.h> 119#include <net/if_var.h> 120#include <net/if_arp.h> 121#include <net/ethernet.h> 122#include <net/if_dl.h> 123#include <net/if_media.h> 124#include <net/if_types.h> 125 126#include <net/bpf.h> 127 128#include <machine/bus.h> 129#include <machine/resource.h> 130#include <sys/bus.h> 131#include <sys/rman.h> 132 133#include <dev/mii/mii.h> 134#include <dev/mii/mii_bitbang.h> 135#include <dev/mii/miivar.h> 136 137#include <dev/pci/pcireg.h> 138#include <dev/pci/pcivar.h> 139 140MODULE_DEPEND(xl, pci, 1, 1, 1); 141MODULE_DEPEND(xl, ether, 1, 1, 1); 142MODULE_DEPEND(xl, miibus, 1, 1, 1); 143 144/* "device miibus" required. See GENERIC if you get errors here. */ 145#include "miibus_if.h" 146 147#include <dev/xl/if_xlreg.h> 148 149/* 150 * TX Checksumming is disabled by default for two reasons: 151 * - TX Checksumming will occasionally produce corrupt packets 152 * - TX Checksumming seems to reduce performance 153 * 154 * Only 905B/C cards were reported to have this problem, it is possible 155 * that later chips _may_ be immune. 156 */ 157#define XL905B_TXCSUM_BROKEN 1 158 159#ifdef XL905B_TXCSUM_BROKEN 160#define XL905B_CSUM_FEATURES 0 161#else 162#define XL905B_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) 163#endif 164 165/* 166 * Various supported device vendors/types and their names. 167 */ 168static const struct xl_type xl_devs[] = { 169 { TC_VENDORID, TC_DEVICEID_BOOMERANG_10BT, 170 "3Com 3c900-TPO Etherlink XL" }, 171 { TC_VENDORID, TC_DEVICEID_BOOMERANG_10BT_COMBO, 172 "3Com 3c900-COMBO Etherlink XL" }, 173 { TC_VENDORID, TC_DEVICEID_BOOMERANG_10_100BT, 174 "3Com 3c905-TX Fast Etherlink XL" }, 175 { TC_VENDORID, TC_DEVICEID_BOOMERANG_100BT4, 176 "3Com 3c905-T4 Fast Etherlink XL" }, 177 { TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT, 178 "3Com 3c900B-TPO Etherlink XL" }, 179 { TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT_COMBO, 180 "3Com 3c900B-COMBO Etherlink XL" }, 181 { TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT_TPC, 182 "3Com 3c900B-TPC Etherlink XL" }, 183 { TC_VENDORID, TC_DEVICEID_CYCLONE_10FL, 184 "3Com 3c900B-FL Etherlink XL" }, 185 { TC_VENDORID, TC_DEVICEID_HURRICANE_10_100BT, 186 "3Com 3c905B-TX Fast Etherlink XL" }, 187 { TC_VENDORID, TC_DEVICEID_CYCLONE_10_100BT4, 188 "3Com 3c905B-T4 Fast Etherlink XL" }, 189 { TC_VENDORID, TC_DEVICEID_CYCLONE_10_100FX, 190 "3Com 3c905B-FX/SC Fast Etherlink XL" }, 191 { TC_VENDORID, TC_DEVICEID_CYCLONE_10_100_COMBO, 192 "3Com 3c905B-COMBO Fast Etherlink XL" }, 193 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT, 194 "3Com 3c905C-TX Fast Etherlink XL" }, 195 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_920B, 196 "3Com 3c920B-EMB Integrated Fast Etherlink XL" }, 197 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_920B_WNM, 198 "3Com 3c920B-EMB-WNM Integrated Fast Etherlink XL" }, 199 { TC_VENDORID, TC_DEVICEID_HURRICANE_10_100BT_SERV, 200 "3Com 3c980 Fast Etherlink XL" }, 201 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_SERV, 202 "3Com 3c980C Fast Etherlink XL" }, 203 { TC_VENDORID, TC_DEVICEID_HURRICANE_SOHO100TX, 204 "3Com 3cSOHO100-TX OfficeConnect" }, 205 { TC_VENDORID, TC_DEVICEID_TORNADO_HOMECONNECT, 206 "3Com 3c450-TX HomeConnect" }, 207 { TC_VENDORID, TC_DEVICEID_HURRICANE_555, 208 "3Com 3c555 Fast Etherlink XL" }, 209 { TC_VENDORID, TC_DEVICEID_HURRICANE_556, 210 "3Com 3c556 Fast Etherlink XL" }, 211 { TC_VENDORID, TC_DEVICEID_HURRICANE_556B, 212 "3Com 3c556B Fast Etherlink XL" }, 213 { TC_VENDORID, TC_DEVICEID_HURRICANE_575A, 214 "3Com 3c575TX Fast Etherlink XL" }, 215 { TC_VENDORID, TC_DEVICEID_HURRICANE_575B, 216 "3Com 3c575B Fast Etherlink XL" }, 217 { TC_VENDORID, TC_DEVICEID_HURRICANE_575C, 218 "3Com 3c575C Fast Etherlink XL" }, 219 { TC_VENDORID, TC_DEVICEID_HURRICANE_656, 220 "3Com 3c656 Fast Etherlink XL" }, 221 { TC_VENDORID, TC_DEVICEID_HURRICANE_656B, 222 "3Com 3c656B Fast Etherlink XL" }, 223 { TC_VENDORID, TC_DEVICEID_TORNADO_656C, 224 "3Com 3c656C Fast Etherlink XL" }, 225 { 0, 0, NULL } 226}; 227 228static int xl_probe(device_t); 229static int xl_attach(device_t); 230static int xl_detach(device_t); 231 232static int xl_newbuf(struct xl_softc *, struct xl_chain_onefrag *); 233static void xl_tick(void *); 234static void xl_stats_update(struct xl_softc *); 235static int xl_encap(struct xl_softc *, struct xl_chain *, struct mbuf **); 236static int xl_rxeof(struct xl_softc *); 237static void xl_rxeof_task(void *, int); 238static int xl_rx_resync(struct xl_softc *); 239static void xl_txeof(struct xl_softc *); 240static void xl_txeof_90xB(struct xl_softc *); 241static void xl_txeoc(struct xl_softc *); 242static void xl_intr(void *); 243static void xl_start(struct ifnet *); 244static void xl_start_locked(struct ifnet *); 245static void xl_start_90xB_locked(struct ifnet *); 246static int xl_ioctl(struct ifnet *, u_long, caddr_t); 247static void xl_init(void *); 248static void xl_init_locked(struct xl_softc *); 249static void xl_stop(struct xl_softc *); 250static int xl_watchdog(struct xl_softc *); 251static int xl_shutdown(device_t); 252static int xl_suspend(device_t); 253static int xl_resume(device_t); 254static void xl_setwol(struct xl_softc *); 255 256#ifdef DEVICE_POLLING 257static int xl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); 258static int xl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count); 259#endif 260 261static int xl_ifmedia_upd(struct ifnet *); 262static void xl_ifmedia_sts(struct ifnet *, struct ifmediareq *); 263 264static int xl_eeprom_wait(struct xl_softc *); 265static int xl_read_eeprom(struct xl_softc *, caddr_t, int, int, int); 266 267static void xl_rxfilter(struct xl_softc *); 268static void xl_rxfilter_90x(struct xl_softc *); 269static void xl_rxfilter_90xB(struct xl_softc *); 270static void xl_setcfg(struct xl_softc *); 271static void xl_setmode(struct xl_softc *, int); 272static void xl_reset(struct xl_softc *); 273static int xl_list_rx_init(struct xl_softc *); 274static int xl_list_tx_init(struct xl_softc *); 275static int xl_list_tx_init_90xB(struct xl_softc *); 276static void xl_wait(struct xl_softc *); 277static void xl_mediacheck(struct xl_softc *); 278static void xl_choose_media(struct xl_softc *sc, int *media); 279static void xl_choose_xcvr(struct xl_softc *, int); 280static void xl_dma_map_addr(void *, bus_dma_segment_t *, int, int); 281#ifdef notdef 282static void xl_testpacket(struct xl_softc *); 283#endif 284 285static int xl_miibus_readreg(device_t, int, int); 286static int xl_miibus_writereg(device_t, int, int, int); 287static void xl_miibus_statchg(device_t); 288static void xl_miibus_mediainit(device_t); 289 290/* 291 * MII bit-bang glue 292 */ 293static uint32_t xl_mii_bitbang_read(device_t); 294static void xl_mii_bitbang_write(device_t, uint32_t); 295 296static const struct mii_bitbang_ops xl_mii_bitbang_ops = { 297 xl_mii_bitbang_read, 298 xl_mii_bitbang_write, 299 { 300 XL_MII_DATA, /* MII_BIT_MDO */ 301 XL_MII_DATA, /* MII_BIT_MDI */ 302 XL_MII_CLK, /* MII_BIT_MDC */ 303 XL_MII_DIR, /* MII_BIT_DIR_HOST_PHY */ 304 0, /* MII_BIT_DIR_PHY_HOST */ 305 } 306}; 307 308static device_method_t xl_methods[] = { 309 /* Device interface */ 310 DEVMETHOD(device_probe, xl_probe), 311 DEVMETHOD(device_attach, xl_attach), 312 DEVMETHOD(device_detach, xl_detach), 313 DEVMETHOD(device_shutdown, xl_shutdown), 314 DEVMETHOD(device_suspend, xl_suspend), 315 DEVMETHOD(device_resume, xl_resume), 316 317 /* MII interface */ 318 DEVMETHOD(miibus_readreg, xl_miibus_readreg), 319 DEVMETHOD(miibus_writereg, xl_miibus_writereg), 320 DEVMETHOD(miibus_statchg, xl_miibus_statchg), 321 DEVMETHOD(miibus_mediainit, xl_miibus_mediainit), 322 323 DEVMETHOD_END 324}; 325 326static driver_t xl_driver = { 327 "xl", 328 xl_methods, 329 sizeof(struct xl_softc) 330}; 331 332static devclass_t xl_devclass; 333 334DRIVER_MODULE_ORDERED(xl, pci, xl_driver, xl_devclass, NULL, NULL, 335 SI_ORDER_ANY); 336DRIVER_MODULE(miibus, xl, miibus_driver, miibus_devclass, NULL, NULL); 337MODULE_PNP_INFO("U16:vendor;U16:device;D:#", pci, xl, xl_devs, 338 nitems(xl_devs) - 1); 339 340static void 341xl_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 342{ 343 u_int32_t *paddr; 344 345 paddr = arg; 346 *paddr = segs->ds_addr; 347} 348 349/* 350 * Murphy's law says that it's possible the chip can wedge and 351 * the 'command in progress' bit may never clear. Hence, we wait 352 * only a finite amount of time to avoid getting caught in an 353 * infinite loop. Normally this delay routine would be a macro, 354 * but it isn't called during normal operation so we can afford 355 * to make it a function. Suppress warning when card gone. 356 */ 357static void 358xl_wait(struct xl_softc *sc) 359{ 360 int i; 361 362 for (i = 0; i < XL_TIMEOUT; i++) { 363 if ((CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY) == 0) 364 break; 365 } 366 367 if (i == XL_TIMEOUT && bus_child_present(sc->xl_dev)) 368 device_printf(sc->xl_dev, "command never completed!\n"); 369} 370 371/* 372 * MII access routines are provided for adapters with external 373 * PHYs (3c905-TX, 3c905-T4, 3c905B-T4) and those with built-in 374 * autoneg logic that's faked up to look like a PHY (3c905B-TX). 375 * Note: if you don't perform the MDIO operations just right, 376 * it's possible to end up with code that works correctly with 377 * some chips/CPUs/processor speeds/bus speeds/etc but not 378 * with others. 379 */ 380 381/* 382 * Read the MII serial port for the MII bit-bang module. 383 */ 384static uint32_t 385xl_mii_bitbang_read(device_t dev) 386{ 387 struct xl_softc *sc; 388 uint32_t val; 389 390 sc = device_get_softc(dev); 391 392 /* We're already in window 4. */ 393 val = CSR_READ_2(sc, XL_W4_PHY_MGMT); 394 CSR_BARRIER(sc, XL_W4_PHY_MGMT, 2, 395 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE); 396 397 return (val); 398} 399 400/* 401 * Write the MII serial port for the MII bit-bang module. 402 */ 403static void 404xl_mii_bitbang_write(device_t dev, uint32_t val) 405{ 406 struct xl_softc *sc; 407 408 sc = device_get_softc(dev); 409 410 /* We're already in window 4. */ 411 CSR_WRITE_2(sc, XL_W4_PHY_MGMT, val); 412 CSR_BARRIER(sc, XL_W4_PHY_MGMT, 2, 413 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE); 414} 415 416static int 417xl_miibus_readreg(device_t dev, int phy, int reg) 418{ 419 struct xl_softc *sc; 420 421 sc = device_get_softc(dev); 422 423 /* Select the window 4. */ 424 XL_SEL_WIN(4); 425 426 return (mii_bitbang_readreg(dev, &xl_mii_bitbang_ops, phy, reg)); 427} 428 429static int 430xl_miibus_writereg(device_t dev, int phy, int reg, int data) 431{ 432 struct xl_softc *sc; 433 434 sc = device_get_softc(dev); 435 436 /* Select the window 4. */ 437 XL_SEL_WIN(4); 438 439 mii_bitbang_writereg(dev, &xl_mii_bitbang_ops, phy, reg, data); 440 441 return (0); 442} 443 444static void 445xl_miibus_statchg(device_t dev) 446{ 447 struct xl_softc *sc; 448 struct mii_data *mii; 449 uint8_t macctl; 450 451 sc = device_get_softc(dev); 452 mii = device_get_softc(sc->xl_miibus); 453 454 xl_setcfg(sc); 455 456 /* Set ASIC's duplex mode to match the PHY. */ 457 XL_SEL_WIN(3); 458 macctl = CSR_READ_1(sc, XL_W3_MAC_CTRL); 459 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) { 460 macctl |= XL_MACCTRL_DUPLEX; 461 if (sc->xl_type == XL_TYPE_905B) { 462 if ((IFM_OPTIONS(mii->mii_media_active) & 463 IFM_ETH_RXPAUSE) != 0) 464 macctl |= XL_MACCTRL_FLOW_CONTROL_ENB; 465 else 466 macctl &= ~XL_MACCTRL_FLOW_CONTROL_ENB; 467 } 468 } else { 469 macctl &= ~XL_MACCTRL_DUPLEX; 470 if (sc->xl_type == XL_TYPE_905B) 471 macctl &= ~XL_MACCTRL_FLOW_CONTROL_ENB; 472 } 473 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, macctl); 474} 475 476/* 477 * Special support for the 3c905B-COMBO. This card has 10/100 support 478 * plus BNC and AUI ports. This means we will have both an miibus attached 479 * plus some non-MII media settings. In order to allow this, we have to 480 * add the extra media to the miibus's ifmedia struct, but we can't do 481 * that during xl_attach() because the miibus hasn't been attached yet. 482 * So instead, we wait until the miibus probe/attach is done, at which 483 * point we will get a callback telling is that it's safe to add our 484 * extra media. 485 */ 486static void 487xl_miibus_mediainit(device_t dev) 488{ 489 struct xl_softc *sc; 490 struct mii_data *mii; 491 struct ifmedia *ifm; 492 493 sc = device_get_softc(dev); 494 mii = device_get_softc(sc->xl_miibus); 495 ifm = &mii->mii_media; 496 497 if (sc->xl_media & (XL_MEDIAOPT_AUI | XL_MEDIAOPT_10FL)) { 498 /* 499 * Check for a 10baseFL board in disguise. 500 */ 501 if (sc->xl_type == XL_TYPE_905B && 502 sc->xl_media == XL_MEDIAOPT_10FL) { 503 if (bootverbose) 504 device_printf(sc->xl_dev, "found 10baseFL\n"); 505 ifmedia_add(ifm, IFM_ETHER | IFM_10_FL, 0, NULL); 506 ifmedia_add(ifm, IFM_ETHER | IFM_10_FL|IFM_HDX, 0, 507 NULL); 508 if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) 509 ifmedia_add(ifm, 510 IFM_ETHER | IFM_10_FL | IFM_FDX, 0, NULL); 511 } else { 512 if (bootverbose) 513 device_printf(sc->xl_dev, "found AUI\n"); 514 ifmedia_add(ifm, IFM_ETHER | IFM_10_5, 0, NULL); 515 } 516 } 517 518 if (sc->xl_media & XL_MEDIAOPT_BNC) { 519 if (bootverbose) 520 device_printf(sc->xl_dev, "found BNC\n"); 521 ifmedia_add(ifm, IFM_ETHER | IFM_10_2, 0, NULL); 522 } 523} 524 525/* 526 * The EEPROM is slow: give it time to come ready after issuing 527 * it a command. 528 */ 529static int 530xl_eeprom_wait(struct xl_softc *sc) 531{ 532 int i; 533 534 for (i = 0; i < 100; i++) { 535 if (CSR_READ_2(sc, XL_W0_EE_CMD) & XL_EE_BUSY) 536 DELAY(162); 537 else 538 break; 539 } 540 541 if (i == 100) { 542 device_printf(sc->xl_dev, "eeprom failed to come ready\n"); 543 return (1); 544 } 545 546 return (0); 547} 548 549/* 550 * Read a sequence of words from the EEPROM. Note that ethernet address 551 * data is stored in the EEPROM in network byte order. 552 */ 553static int 554xl_read_eeprom(struct xl_softc *sc, caddr_t dest, int off, int cnt, int swap) 555{ 556 int err = 0, i; 557 u_int16_t word = 0, *ptr; 558 559#define EEPROM_5BIT_OFFSET(A) ((((A) << 2) & 0x7F00) | ((A) & 0x003F)) 560#define EEPROM_8BIT_OFFSET(A) ((A) & 0x003F) 561 /* 562 * XXX: WARNING! DANGER! 563 * It's easy to accidentally overwrite the rom content! 564 * Note: the 3c575 uses 8bit EEPROM offsets. 565 */ 566 XL_SEL_WIN(0); 567 568 if (xl_eeprom_wait(sc)) 569 return (1); 570 571 if (sc->xl_flags & XL_FLAG_EEPROM_OFFSET_30) 572 off += 0x30; 573 574 for (i = 0; i < cnt; i++) { 575 if (sc->xl_flags & XL_FLAG_8BITROM) 576 CSR_WRITE_2(sc, XL_W0_EE_CMD, 577 XL_EE_8BIT_READ | EEPROM_8BIT_OFFSET(off + i)); 578 else 579 CSR_WRITE_2(sc, XL_W0_EE_CMD, 580 XL_EE_READ | EEPROM_5BIT_OFFSET(off + i)); 581 err = xl_eeprom_wait(sc); 582 if (err) 583 break; 584 word = CSR_READ_2(sc, XL_W0_EE_DATA); 585 ptr = (u_int16_t *)(dest + (i * 2)); 586 if (swap) 587 *ptr = ntohs(word); 588 else 589 *ptr = word; 590 } 591 592 return (err ? 1 : 0); 593} 594 595static void 596xl_rxfilter(struct xl_softc *sc) 597{ 598 599 if (sc->xl_type == XL_TYPE_905B) 600 xl_rxfilter_90xB(sc); 601 else 602 xl_rxfilter_90x(sc); 603} 604 605/* 606 * NICs older than the 3c905B have only one multicast option, which 607 * is to enable reception of all multicast frames. 608 */ 609static u_int 610xl_check_maddr_90x(void *arg, struct sockaddr_dl *sdl, u_int cnt) 611{ 612 uint8_t *rxfilt = arg; 613 614 *rxfilt |= XL_RXFILTER_ALLMULTI; 615 616 return (1); 617} 618 619static void 620xl_rxfilter_90x(struct xl_softc *sc) 621{ 622 struct ifnet *ifp; 623 u_int8_t rxfilt; 624 625 XL_LOCK_ASSERT(sc); 626 627 ifp = sc->xl_ifp; 628 629 XL_SEL_WIN(5); 630 rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER); 631 rxfilt &= ~(XL_RXFILTER_ALLFRAMES | XL_RXFILTER_ALLMULTI | 632 XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL); 633 634 /* Set the individual bit to receive frames for this host only. */ 635 rxfilt |= XL_RXFILTER_INDIVIDUAL; 636 /* Set capture broadcast bit to capture broadcast frames. */ 637 if (ifp->if_flags & IFF_BROADCAST) 638 rxfilt |= XL_RXFILTER_BROADCAST; 639 640 /* If we want promiscuous mode, set the allframes bit. */ 641 if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) { 642 if (ifp->if_flags & IFF_PROMISC) 643 rxfilt |= XL_RXFILTER_ALLFRAMES; 644 if (ifp->if_flags & IFF_ALLMULTI) 645 rxfilt |= XL_RXFILTER_ALLMULTI; 646 } else 647 if_foreach_llmaddr(sc->xl_ifp, xl_check_maddr_90x, &rxfilt); 648 649 CSR_WRITE_2(sc, XL_COMMAND, rxfilt | XL_CMD_RX_SET_FILT); 650 XL_SEL_WIN(7); 651} 652 653/* 654 * 3c905B adapters have a hash filter that we can program. 655 * Note: the 3c905B currently only supports a 64-bit 656 * hash table, which means we really only need 6 bits, 657 * but the manual indicates that future chip revisions 658 * will have a 256-bit hash table, hence the routine 659 * is set up to calculate 8 bits of position info in 660 * case we need it some day. 661 * Note II, The Sequel: _CURRENT_ versions of the 662 * 3c905B have a 256 bit hash table. This means we have 663 * to use all 8 bits regardless. On older cards, the 664 * upper 2 bits will be ignored. Grrrr.... 665 */ 666static u_int 667xl_check_maddr_90xB(void *arg, struct sockaddr_dl *sdl, u_int count) 668{ 669 struct xl_softc *sc = arg; 670 uint16_t h; 671 672 h = ether_crc32_be(LLADDR(sdl), ETHER_ADDR_LEN) & 0xFF; 673 CSR_WRITE_2(sc, XL_COMMAND, h | XL_CMD_RX_SET_HASH | XL_HASH_SET); 674 675 return (1); 676} 677 678static void 679xl_rxfilter_90xB(struct xl_softc *sc) 680{ 681 struct ifnet *ifp; 682 int i; 683 u_int8_t rxfilt; 684 685 XL_LOCK_ASSERT(sc); 686 687 ifp = sc->xl_ifp; 688 689 XL_SEL_WIN(5); 690 rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER); 691 rxfilt &= ~(XL_RXFILTER_ALLFRAMES | XL_RXFILTER_ALLMULTI | 692 XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL | 693 XL_RXFILTER_MULTIHASH); 694 695 /* Set the individual bit to receive frames for this host only. */ 696 rxfilt |= XL_RXFILTER_INDIVIDUAL; 697 /* Set capture broadcast bit to capture broadcast frames. */ 698 if (ifp->if_flags & IFF_BROADCAST) 699 rxfilt |= XL_RXFILTER_BROADCAST; 700 701 /* If we want promiscuous mode, set the allframes bit. */ 702 if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) { 703 if (ifp->if_flags & IFF_PROMISC) 704 rxfilt |= XL_RXFILTER_ALLFRAMES; 705 if (ifp->if_flags & IFF_ALLMULTI) 706 rxfilt |= XL_RXFILTER_ALLMULTI; 707 } else { 708 /* First, zot all the existing hash bits. */ 709 for (i = 0; i < XL_HASHFILT_SIZE; i++) 710 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_HASH | i); 711 712 /* Now program new ones. */ 713 if (if_foreach_llmaddr(sc->xl_ifp, xl_check_maddr_90xB, sc) > 0) 714 rxfilt |= XL_RXFILTER_MULTIHASH; 715 } 716 717 CSR_WRITE_2(sc, XL_COMMAND, rxfilt | XL_CMD_RX_SET_FILT); 718 XL_SEL_WIN(7); 719} 720 721static void 722xl_setcfg(struct xl_softc *sc) 723{ 724 u_int32_t icfg; 725 726 /*XL_LOCK_ASSERT(sc);*/ 727 728 XL_SEL_WIN(3); 729 icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG); 730 icfg &= ~XL_ICFG_CONNECTOR_MASK; 731 if (sc->xl_media & XL_MEDIAOPT_MII || 732 sc->xl_media & XL_MEDIAOPT_BT4) 733 icfg |= (XL_XCVR_MII << XL_ICFG_CONNECTOR_BITS); 734 if (sc->xl_media & XL_MEDIAOPT_BTX) 735 icfg |= (XL_XCVR_AUTO << XL_ICFG_CONNECTOR_BITS); 736 737 CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg); 738 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 739} 740 741static void 742xl_setmode(struct xl_softc *sc, int media) 743{ 744 u_int32_t icfg; 745 u_int16_t mediastat; 746 char *pmsg = "", *dmsg = ""; 747 748 XL_LOCK_ASSERT(sc); 749 750 XL_SEL_WIN(4); 751 mediastat = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); 752 XL_SEL_WIN(3); 753 icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG); 754 755 if (sc->xl_media & XL_MEDIAOPT_BT) { 756 if (IFM_SUBTYPE(media) == IFM_10_T) { 757 pmsg = "10baseT transceiver"; 758 sc->xl_xcvr = XL_XCVR_10BT; 759 icfg &= ~XL_ICFG_CONNECTOR_MASK; 760 icfg |= (XL_XCVR_10BT << XL_ICFG_CONNECTOR_BITS); 761 mediastat |= XL_MEDIASTAT_LINKBEAT | 762 XL_MEDIASTAT_JABGUARD; 763 mediastat &= ~XL_MEDIASTAT_SQEENB; 764 } 765 } 766 767 if (sc->xl_media & XL_MEDIAOPT_BFX) { 768 if (IFM_SUBTYPE(media) == IFM_100_FX) { 769 pmsg = "100baseFX port"; 770 sc->xl_xcvr = XL_XCVR_100BFX; 771 icfg &= ~XL_ICFG_CONNECTOR_MASK; 772 icfg |= (XL_XCVR_100BFX << XL_ICFG_CONNECTOR_BITS); 773 mediastat |= XL_MEDIASTAT_LINKBEAT; 774 mediastat &= ~XL_MEDIASTAT_SQEENB; 775 } 776 } 777 778 if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) { 779 if (IFM_SUBTYPE(media) == IFM_10_5) { 780 pmsg = "AUI port"; 781 sc->xl_xcvr = XL_XCVR_AUI; 782 icfg &= ~XL_ICFG_CONNECTOR_MASK; 783 icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS); 784 mediastat &= ~(XL_MEDIASTAT_LINKBEAT | 785 XL_MEDIASTAT_JABGUARD); 786 mediastat |= ~XL_MEDIASTAT_SQEENB; 787 } 788 if (IFM_SUBTYPE(media) == IFM_10_FL) { 789 pmsg = "10baseFL transceiver"; 790 sc->xl_xcvr = XL_XCVR_AUI; 791 icfg &= ~XL_ICFG_CONNECTOR_MASK; 792 icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS); 793 mediastat &= ~(XL_MEDIASTAT_LINKBEAT | 794 XL_MEDIASTAT_JABGUARD); 795 mediastat |= ~XL_MEDIASTAT_SQEENB; 796 } 797 } 798 799 if (sc->xl_media & XL_MEDIAOPT_BNC) { 800 if (IFM_SUBTYPE(media) == IFM_10_2) { 801 pmsg = "AUI port"; 802 sc->xl_xcvr = XL_XCVR_COAX; 803 icfg &= ~XL_ICFG_CONNECTOR_MASK; 804 icfg |= (XL_XCVR_COAX << XL_ICFG_CONNECTOR_BITS); 805 mediastat &= ~(XL_MEDIASTAT_LINKBEAT | 806 XL_MEDIASTAT_JABGUARD | XL_MEDIASTAT_SQEENB); 807 } 808 } 809 810 if ((media & IFM_GMASK) == IFM_FDX || 811 IFM_SUBTYPE(media) == IFM_100_FX) { 812 dmsg = "full"; 813 XL_SEL_WIN(3); 814 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, XL_MACCTRL_DUPLEX); 815 } else { 816 dmsg = "half"; 817 XL_SEL_WIN(3); 818 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, 819 (CSR_READ_1(sc, XL_W3_MAC_CTRL) & ~XL_MACCTRL_DUPLEX)); 820 } 821 822 if (IFM_SUBTYPE(media) == IFM_10_2) 823 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START); 824 else 825 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 826 827 CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg); 828 XL_SEL_WIN(4); 829 CSR_WRITE_2(sc, XL_W4_MEDIA_STATUS, mediastat); 830 831 DELAY(800); 832 XL_SEL_WIN(7); 833 834 device_printf(sc->xl_dev, "selecting %s, %s duplex\n", pmsg, dmsg); 835} 836 837static void 838xl_reset(struct xl_softc *sc) 839{ 840 int i; 841 842 XL_LOCK_ASSERT(sc); 843 844 XL_SEL_WIN(0); 845 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RESET | 846 ((sc->xl_flags & XL_FLAG_WEIRDRESET) ? 847 XL_RESETOPT_DISADVFD:0)); 848 849 /* 850 * If we're using memory mapped register mode, pause briefly 851 * after issuing the reset command before trying to access any 852 * other registers. With my 3c575C CardBus card, failing to do 853 * this results in the system locking up while trying to poll 854 * the command busy bit in the status register. 855 */ 856 if (sc->xl_flags & XL_FLAG_USE_MMIO) 857 DELAY(100000); 858 859 for (i = 0; i < XL_TIMEOUT; i++) { 860 DELAY(10); 861 if (!(CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY)) 862 break; 863 } 864 865 if (i == XL_TIMEOUT) 866 device_printf(sc->xl_dev, "reset didn't complete\n"); 867 868 /* Reset TX and RX. */ 869 /* Note: the RX reset takes an absurd amount of time 870 * on newer versions of the Tornado chips such as those 871 * on the 3c905CX and newer 3c908C cards. We wait an 872 * extra amount of time so that xl_wait() doesn't complain 873 * and annoy the users. 874 */ 875 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 876 DELAY(100000); 877 xl_wait(sc); 878 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 879 xl_wait(sc); 880 881 if (sc->xl_flags & XL_FLAG_INVERT_LED_PWR || 882 sc->xl_flags & XL_FLAG_INVERT_MII_PWR) { 883 XL_SEL_WIN(2); 884 CSR_WRITE_2(sc, XL_W2_RESET_OPTIONS, 885 CSR_READ_2(sc, XL_W2_RESET_OPTIONS) | 886 ((sc->xl_flags & XL_FLAG_INVERT_LED_PWR) ? 887 XL_RESETOPT_INVERT_LED : 0) | 888 ((sc->xl_flags & XL_FLAG_INVERT_MII_PWR) ? 889 XL_RESETOPT_INVERT_MII : 0)); 890 } 891 892 /* Wait a little while for the chip to get its brains in order. */ 893 DELAY(100000); 894} 895 896/* 897 * Probe for a 3Com Etherlink XL chip. Check the PCI vendor and device 898 * IDs against our list and return a device name if we find a match. 899 */ 900static int 901xl_probe(device_t dev) 902{ 903 const struct xl_type *t; 904 905 t = xl_devs; 906 907 while (t->xl_name != NULL) { 908 if ((pci_get_vendor(dev) == t->xl_vid) && 909 (pci_get_device(dev) == t->xl_did)) { 910 device_set_desc(dev, t->xl_name); 911 return (BUS_PROBE_DEFAULT); 912 } 913 t++; 914 } 915 916 return (ENXIO); 917} 918 919/* 920 * This routine is a kludge to work around possible hardware faults 921 * or manufacturing defects that can cause the media options register 922 * (or reset options register, as it's called for the first generation 923 * 3c90x adapters) to return an incorrect result. I have encountered 924 * one Dell Latitude laptop docking station with an integrated 3c905-TX 925 * which doesn't have any of the 'mediaopt' bits set. This screws up 926 * the attach routine pretty badly because it doesn't know what media 927 * to look for. If we find ourselves in this predicament, this routine 928 * will try to guess the media options values and warn the user of a 929 * possible manufacturing defect with his adapter/system/whatever. 930 */ 931static void 932xl_mediacheck(struct xl_softc *sc) 933{ 934 935 /* 936 * If some of the media options bits are set, assume they are 937 * correct. If not, try to figure it out down below. 938 * XXX I should check for 10baseFL, but I don't have an adapter 939 * to test with. 940 */ 941 if (sc->xl_media & (XL_MEDIAOPT_MASK & ~XL_MEDIAOPT_VCO)) { 942 /* 943 * Check the XCVR value. If it's not in the normal range 944 * of values, we need to fake it up here. 945 */ 946 if (sc->xl_xcvr <= XL_XCVR_AUTO) 947 return; 948 else { 949 device_printf(sc->xl_dev, 950 "bogus xcvr value in EEPROM (%x)\n", sc->xl_xcvr); 951 device_printf(sc->xl_dev, 952 "choosing new default based on card type\n"); 953 } 954 } else { 955 if (sc->xl_type == XL_TYPE_905B && 956 sc->xl_media & XL_MEDIAOPT_10FL) 957 return; 958 device_printf(sc->xl_dev, 959"WARNING: no media options bits set in the media options register!!\n"); 960 device_printf(sc->xl_dev, 961"this could be a manufacturing defect in your adapter or system\n"); 962 device_printf(sc->xl_dev, 963"attempting to guess media type; you should probably consult your vendor\n"); 964 } 965 966 xl_choose_xcvr(sc, 1); 967} 968 969static void 970xl_choose_xcvr(struct xl_softc *sc, int verbose) 971{ 972 u_int16_t devid; 973 974 /* 975 * Read the device ID from the EEPROM. 976 * This is what's loaded into the PCI device ID register, so it has 977 * to be correct otherwise we wouldn't have gotten this far. 978 */ 979 xl_read_eeprom(sc, (caddr_t)&devid, XL_EE_PRODID, 1, 0); 980 981 switch (devid) { 982 case TC_DEVICEID_BOOMERANG_10BT: /* 3c900-TPO */ 983 case TC_DEVICEID_KRAKATOA_10BT: /* 3c900B-TPO */ 984 sc->xl_media = XL_MEDIAOPT_BT; 985 sc->xl_xcvr = XL_XCVR_10BT; 986 if (verbose) 987 device_printf(sc->xl_dev, 988 "guessing 10BaseT transceiver\n"); 989 break; 990 case TC_DEVICEID_BOOMERANG_10BT_COMBO: /* 3c900-COMBO */ 991 case TC_DEVICEID_KRAKATOA_10BT_COMBO: /* 3c900B-COMBO */ 992 sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI; 993 sc->xl_xcvr = XL_XCVR_10BT; 994 if (verbose) 995 device_printf(sc->xl_dev, 996 "guessing COMBO (AUI/BNC/TP)\n"); 997 break; 998 case TC_DEVICEID_KRAKATOA_10BT_TPC: /* 3c900B-TPC */ 999 sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC; 1000 sc->xl_xcvr = XL_XCVR_10BT; 1001 if (verbose) 1002 device_printf(sc->xl_dev, "guessing TPC (BNC/TP)\n"); 1003 break; 1004 case TC_DEVICEID_CYCLONE_10FL: /* 3c900B-FL */ 1005 sc->xl_media = XL_MEDIAOPT_10FL; 1006 sc->xl_xcvr = XL_XCVR_AUI; 1007 if (verbose) 1008 device_printf(sc->xl_dev, "guessing 10baseFL\n"); 1009 break; 1010 case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */ 1011 case TC_DEVICEID_HURRICANE_555: /* 3c555 */ 1012 case TC_DEVICEID_HURRICANE_556: /* 3c556 */ 1013 case TC_DEVICEID_HURRICANE_556B: /* 3c556B */ 1014 case TC_DEVICEID_HURRICANE_575A: /* 3c575TX */ 1015 case TC_DEVICEID_HURRICANE_575B: /* 3c575B */ 1016 case TC_DEVICEID_HURRICANE_575C: /* 3c575C */ 1017 case TC_DEVICEID_HURRICANE_656: /* 3c656 */ 1018 case TC_DEVICEID_HURRICANE_656B: /* 3c656B */ 1019 case TC_DEVICEID_TORNADO_656C: /* 3c656C */ 1020 case TC_DEVICEID_TORNADO_10_100BT_920B: /* 3c920B-EMB */ 1021 case TC_DEVICEID_TORNADO_10_100BT_920B_WNM: /* 3c920B-EMB-WNM */ 1022 sc->xl_media = XL_MEDIAOPT_MII; 1023 sc->xl_xcvr = XL_XCVR_MII; 1024 if (verbose) 1025 device_printf(sc->xl_dev, "guessing MII\n"); 1026 break; 1027 case TC_DEVICEID_BOOMERANG_100BT4: /* 3c905-T4 */ 1028 case TC_DEVICEID_CYCLONE_10_100BT4: /* 3c905B-T4 */ 1029 sc->xl_media = XL_MEDIAOPT_BT4; 1030 sc->xl_xcvr = XL_XCVR_MII; 1031 if (verbose) 1032 device_printf(sc->xl_dev, "guessing 100baseT4/MII\n"); 1033 break; 1034 case TC_DEVICEID_HURRICANE_10_100BT: /* 3c905B-TX */ 1035 case TC_DEVICEID_HURRICANE_10_100BT_SERV:/*3c980-TX */ 1036 case TC_DEVICEID_TORNADO_10_100BT_SERV: /* 3c980C-TX */ 1037 case TC_DEVICEID_HURRICANE_SOHO100TX: /* 3cSOHO100-TX */ 1038 case TC_DEVICEID_TORNADO_10_100BT: /* 3c905C-TX */ 1039 case TC_DEVICEID_TORNADO_HOMECONNECT: /* 3c450-TX */ 1040 sc->xl_media = XL_MEDIAOPT_BTX; 1041 sc->xl_xcvr = XL_XCVR_AUTO; 1042 if (verbose) 1043 device_printf(sc->xl_dev, "guessing 10/100 internal\n"); 1044 break; 1045 case TC_DEVICEID_CYCLONE_10_100_COMBO: /* 3c905B-COMBO */ 1046 sc->xl_media = XL_MEDIAOPT_BTX|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI; 1047 sc->xl_xcvr = XL_XCVR_AUTO; 1048 if (verbose) 1049 device_printf(sc->xl_dev, 1050 "guessing 10/100 plus BNC/AUI\n"); 1051 break; 1052 default: 1053 device_printf(sc->xl_dev, 1054 "unknown device ID: %x -- defaulting to 10baseT\n", devid); 1055 sc->xl_media = XL_MEDIAOPT_BT; 1056 break; 1057 } 1058} 1059 1060/* 1061 * Attach the interface. Allocate softc structures, do ifmedia 1062 * setup and ethernet/BPF attach. 1063 */ 1064static int 1065xl_attach(device_t dev) 1066{ 1067 u_char eaddr[ETHER_ADDR_LEN]; 1068 u_int16_t sinfo2, xcvr[2]; 1069 struct xl_softc *sc; 1070 struct ifnet *ifp; 1071 int media, pmcap; 1072 int error = 0, phy, rid, res, unit; 1073 uint16_t did; 1074 1075 sc = device_get_softc(dev); 1076 sc->xl_dev = dev; 1077 1078 unit = device_get_unit(dev); 1079 1080 mtx_init(&sc->xl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 1081 MTX_DEF); 1082 ifmedia_init(&sc->ifmedia, 0, xl_ifmedia_upd, xl_ifmedia_sts); 1083 1084 did = pci_get_device(dev); 1085 1086 sc->xl_flags = 0; 1087 if (did == TC_DEVICEID_HURRICANE_555) 1088 sc->xl_flags |= XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_PHYOK; 1089 if (did == TC_DEVICEID_HURRICANE_556 || 1090 did == TC_DEVICEID_HURRICANE_556B) 1091 sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK | 1092 XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_WEIRDRESET | 1093 XL_FLAG_INVERT_LED_PWR | XL_FLAG_INVERT_MII_PWR; 1094 if (did == TC_DEVICEID_HURRICANE_555 || 1095 did == TC_DEVICEID_HURRICANE_556) 1096 sc->xl_flags |= XL_FLAG_8BITROM; 1097 if (did == TC_DEVICEID_HURRICANE_556B) 1098 sc->xl_flags |= XL_FLAG_NO_XCVR_PWR; 1099 1100 if (did == TC_DEVICEID_HURRICANE_575B || 1101 did == TC_DEVICEID_HURRICANE_575C || 1102 did == TC_DEVICEID_HURRICANE_656B || 1103 did == TC_DEVICEID_TORNADO_656C) 1104 sc->xl_flags |= XL_FLAG_FUNCREG; 1105 if (did == TC_DEVICEID_HURRICANE_575A || 1106 did == TC_DEVICEID_HURRICANE_575B || 1107 did == TC_DEVICEID_HURRICANE_575C || 1108 did == TC_DEVICEID_HURRICANE_656B || 1109 did == TC_DEVICEID_TORNADO_656C) 1110 sc->xl_flags |= XL_FLAG_PHYOK | XL_FLAG_EEPROM_OFFSET_30 | 1111 XL_FLAG_8BITROM; 1112 if (did == TC_DEVICEID_HURRICANE_656) 1113 sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK; 1114 if (did == TC_DEVICEID_HURRICANE_575B) 1115 sc->xl_flags |= XL_FLAG_INVERT_LED_PWR; 1116 if (did == TC_DEVICEID_HURRICANE_575C) 1117 sc->xl_flags |= XL_FLAG_INVERT_MII_PWR; 1118 if (did == TC_DEVICEID_TORNADO_656C) 1119 sc->xl_flags |= XL_FLAG_INVERT_MII_PWR; 1120 if (did == TC_DEVICEID_HURRICANE_656 || 1121 did == TC_DEVICEID_HURRICANE_656B) 1122 sc->xl_flags |= XL_FLAG_INVERT_MII_PWR | 1123 XL_FLAG_INVERT_LED_PWR; 1124 if (did == TC_DEVICEID_TORNADO_10_100BT_920B || 1125 did == TC_DEVICEID_TORNADO_10_100BT_920B_WNM) 1126 sc->xl_flags |= XL_FLAG_PHYOK; 1127 1128 switch (did) { 1129 case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */ 1130 case TC_DEVICEID_HURRICANE_575A: 1131 case TC_DEVICEID_HURRICANE_575B: 1132 case TC_DEVICEID_HURRICANE_575C: 1133 sc->xl_flags |= XL_FLAG_NO_MMIO; 1134 break; 1135 default: 1136 break; 1137 } 1138 1139 /* 1140 * Map control/status registers. 1141 */ 1142 pci_enable_busmaster(dev); 1143 1144 if ((sc->xl_flags & XL_FLAG_NO_MMIO) == 0) { 1145 rid = XL_PCI_LOMEM; 1146 res = SYS_RES_MEMORY; 1147 1148 sc->xl_res = bus_alloc_resource_any(dev, res, &rid, RF_ACTIVE); 1149 } 1150 1151 if (sc->xl_res != NULL) { 1152 sc->xl_flags |= XL_FLAG_USE_MMIO; 1153 if (bootverbose) 1154 device_printf(dev, "using memory mapped I/O\n"); 1155 } else { 1156 rid = XL_PCI_LOIO; 1157 res = SYS_RES_IOPORT; 1158 sc->xl_res = bus_alloc_resource_any(dev, res, &rid, RF_ACTIVE); 1159 if (sc->xl_res == NULL) { 1160 device_printf(dev, "couldn't map ports/memory\n"); 1161 error = ENXIO; 1162 goto fail; 1163 } 1164 if (bootverbose) 1165 device_printf(dev, "using port I/O\n"); 1166 } 1167 1168 sc->xl_btag = rman_get_bustag(sc->xl_res); 1169 sc->xl_bhandle = rman_get_bushandle(sc->xl_res); 1170 1171 if (sc->xl_flags & XL_FLAG_FUNCREG) { 1172 rid = XL_PCI_FUNCMEM; 1173 sc->xl_fres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 1174 RF_ACTIVE); 1175 1176 if (sc->xl_fres == NULL) { 1177 device_printf(dev, "couldn't map funcreg memory\n"); 1178 error = ENXIO; 1179 goto fail; 1180 } 1181 1182 sc->xl_ftag = rman_get_bustag(sc->xl_fres); 1183 sc->xl_fhandle = rman_get_bushandle(sc->xl_fres); 1184 } 1185 1186 /* Allocate interrupt */ 1187 rid = 0; 1188 sc->xl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1189 RF_SHAREABLE | RF_ACTIVE); 1190 if (sc->xl_irq == NULL) { 1191 device_printf(dev, "couldn't map interrupt\n"); 1192 error = ENXIO; 1193 goto fail; 1194 } 1195 1196 /* Initialize interface name. */ 1197 ifp = sc->xl_ifp = if_alloc(IFT_ETHER); 1198 if (ifp == NULL) { 1199 device_printf(dev, "can not if_alloc()\n"); 1200 error = ENOSPC; 1201 goto fail; 1202 } 1203 ifp->if_softc = sc; 1204 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 1205 1206 /* Reset the adapter. */ 1207 XL_LOCK(sc); 1208 xl_reset(sc); 1209 XL_UNLOCK(sc); 1210 1211 /* 1212 * Get station address from the EEPROM. 1213 */ 1214 if (xl_read_eeprom(sc, (caddr_t)&eaddr, XL_EE_OEM_ADR0, 3, 1)) { 1215 device_printf(dev, "failed to read station address\n"); 1216 error = ENXIO; 1217 goto fail; 1218 } 1219 1220 callout_init_mtx(&sc->xl_tick_callout, &sc->xl_mtx, 0); 1221 NET_TASK_INIT(&sc->xl_task, 0, xl_rxeof_task, sc); 1222 1223 /* 1224 * Now allocate a tag for the DMA descriptor lists and a chunk 1225 * of DMA-able memory based on the tag. Also obtain the DMA 1226 * addresses of the RX and TX ring, which we'll need later. 1227 * All of our lists are allocated as a contiguous block 1228 * of memory. 1229 */ 1230 error = bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0, 1231 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1232 XL_RX_LIST_SZ, 1, XL_RX_LIST_SZ, 0, NULL, NULL, 1233 &sc->xl_ldata.xl_rx_tag); 1234 if (error) { 1235 device_printf(dev, "failed to allocate rx dma tag\n"); 1236 goto fail; 1237 } 1238 1239 error = bus_dmamem_alloc(sc->xl_ldata.xl_rx_tag, 1240 (void **)&sc->xl_ldata.xl_rx_list, BUS_DMA_NOWAIT | 1241 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->xl_ldata.xl_rx_dmamap); 1242 if (error) { 1243 device_printf(dev, "no memory for rx list buffers!\n"); 1244 bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag); 1245 sc->xl_ldata.xl_rx_tag = NULL; 1246 goto fail; 1247 } 1248 1249 error = bus_dmamap_load(sc->xl_ldata.xl_rx_tag, 1250 sc->xl_ldata.xl_rx_dmamap, sc->xl_ldata.xl_rx_list, 1251 XL_RX_LIST_SZ, xl_dma_map_addr, 1252 &sc->xl_ldata.xl_rx_dmaaddr, BUS_DMA_NOWAIT); 1253 if (error) { 1254 device_printf(dev, "cannot get dma address of the rx ring!\n"); 1255 bus_dmamem_free(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_list, 1256 sc->xl_ldata.xl_rx_dmamap); 1257 bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag); 1258 sc->xl_ldata.xl_rx_tag = NULL; 1259 goto fail; 1260 } 1261 1262 error = bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0, 1263 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1264 XL_TX_LIST_SZ, 1, XL_TX_LIST_SZ, 0, NULL, NULL, 1265 &sc->xl_ldata.xl_tx_tag); 1266 if (error) { 1267 device_printf(dev, "failed to allocate tx dma tag\n"); 1268 goto fail; 1269 } 1270 1271 error = bus_dmamem_alloc(sc->xl_ldata.xl_tx_tag, 1272 (void **)&sc->xl_ldata.xl_tx_list, BUS_DMA_NOWAIT | 1273 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->xl_ldata.xl_tx_dmamap); 1274 if (error) { 1275 device_printf(dev, "no memory for list buffers!\n"); 1276 bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag); 1277 sc->xl_ldata.xl_tx_tag = NULL; 1278 goto fail; 1279 } 1280 1281 error = bus_dmamap_load(sc->xl_ldata.xl_tx_tag, 1282 sc->xl_ldata.xl_tx_dmamap, sc->xl_ldata.xl_tx_list, 1283 XL_TX_LIST_SZ, xl_dma_map_addr, 1284 &sc->xl_ldata.xl_tx_dmaaddr, BUS_DMA_NOWAIT); 1285 if (error) { 1286 device_printf(dev, "cannot get dma address of the tx ring!\n"); 1287 bus_dmamem_free(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_list, 1288 sc->xl_ldata.xl_tx_dmamap); 1289 bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag); 1290 sc->xl_ldata.xl_tx_tag = NULL; 1291 goto fail; 1292 } 1293 1294 /* 1295 * Allocate a DMA tag for the mapping of mbufs. 1296 */ 1297 error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 1298 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1299 MCLBYTES * XL_MAXFRAGS, XL_MAXFRAGS, MCLBYTES, 0, NULL, 1300 NULL, &sc->xl_mtag); 1301 if (error) { 1302 device_printf(dev, "failed to allocate mbuf dma tag\n"); 1303 goto fail; 1304 } 1305 1306 /* We need a spare DMA map for the RX ring. */ 1307 error = bus_dmamap_create(sc->xl_mtag, 0, &sc->xl_tmpmap); 1308 if (error) 1309 goto fail; 1310 1311 /* 1312 * Figure out the card type. 3c905B adapters have the 1313 * 'supportsNoTxLength' bit set in the capabilities 1314 * word in the EEPROM. 1315 * Note: my 3c575C CardBus card lies. It returns a value 1316 * of 0x1578 for its capabilities word, which is somewhat 1317 * nonsensical. Another way to distinguish a 3c90x chip 1318 * from a 3c90xB/C chip is to check for the 'supportsLargePackets' 1319 * bit. This will only be set for 3c90x boomerage chips. 1320 */ 1321 xl_read_eeprom(sc, (caddr_t)&sc->xl_caps, XL_EE_CAPS, 1, 0); 1322 if (sc->xl_caps & XL_CAPS_NO_TXLENGTH || 1323 !(sc->xl_caps & XL_CAPS_LARGE_PKTS)) 1324 sc->xl_type = XL_TYPE_905B; 1325 else 1326 sc->xl_type = XL_TYPE_90X; 1327 1328 /* Check availability of WOL. */ 1329 if ((sc->xl_caps & XL_CAPS_PWRMGMT) != 0 && 1330 pci_find_cap(dev, PCIY_PMG, &pmcap) == 0) { 1331 sc->xl_pmcap = pmcap; 1332 sc->xl_flags |= XL_FLAG_WOL; 1333 sinfo2 = 0; 1334 xl_read_eeprom(sc, (caddr_t)&sinfo2, XL_EE_SOFTINFO2, 1, 0); 1335 if ((sinfo2 & XL_SINFO2_AUX_WOL_CON) == 0 && bootverbose) 1336 device_printf(dev, 1337 "No auxiliary remote wakeup connector!\n"); 1338 } 1339 1340 /* Set the TX start threshold for best performance. */ 1341 sc->xl_tx_thresh = XL_MIN_FRAMELEN; 1342 1343 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1344 ifp->if_ioctl = xl_ioctl; 1345 ifp->if_capabilities = IFCAP_VLAN_MTU; 1346 if (sc->xl_type == XL_TYPE_905B) { 1347 ifp->if_hwassist = XL905B_CSUM_FEATURES; 1348#ifdef XL905B_TXCSUM_BROKEN 1349 ifp->if_capabilities |= IFCAP_RXCSUM; 1350#else 1351 ifp->if_capabilities |= IFCAP_HWCSUM; 1352#endif 1353 } 1354 if ((sc->xl_flags & XL_FLAG_WOL) != 0) 1355 ifp->if_capabilities |= IFCAP_WOL_MAGIC; 1356 ifp->if_capenable = ifp->if_capabilities; 1357#ifdef DEVICE_POLLING 1358 ifp->if_capabilities |= IFCAP_POLLING; 1359#endif 1360 ifp->if_start = xl_start; 1361 ifp->if_init = xl_init; 1362 IFQ_SET_MAXLEN(&ifp->if_snd, XL_TX_LIST_CNT - 1); 1363 ifp->if_snd.ifq_drv_maxlen = XL_TX_LIST_CNT - 1; 1364 IFQ_SET_READY(&ifp->if_snd); 1365 1366 /* 1367 * Now we have to see what sort of media we have. 1368 * This includes probing for an MII interace and a 1369 * possible PHY. 1370 */ 1371 XL_SEL_WIN(3); 1372 sc->xl_media = CSR_READ_2(sc, XL_W3_MEDIA_OPT); 1373 if (bootverbose) 1374 device_printf(dev, "media options word: %x\n", sc->xl_media); 1375 1376 xl_read_eeprom(sc, (char *)&xcvr, XL_EE_ICFG_0, 2, 0); 1377 sc->xl_xcvr = xcvr[0] | xcvr[1] << 16; 1378 sc->xl_xcvr &= XL_ICFG_CONNECTOR_MASK; 1379 sc->xl_xcvr >>= XL_ICFG_CONNECTOR_BITS; 1380 1381 xl_mediacheck(sc); 1382 1383 if (sc->xl_media & XL_MEDIAOPT_MII || 1384 sc->xl_media & XL_MEDIAOPT_BTX || 1385 sc->xl_media & XL_MEDIAOPT_BT4) { 1386 if (bootverbose) 1387 device_printf(dev, "found MII/AUTO\n"); 1388 xl_setcfg(sc); 1389 /* 1390 * Attach PHYs only at MII address 24 if !XL_FLAG_PHYOK. 1391 * This is to guard against problems with certain 3Com ASIC 1392 * revisions that incorrectly map the internal transceiver 1393 * control registers at all MII addresses. 1394 */ 1395 phy = MII_PHY_ANY; 1396 if ((sc->xl_flags & XL_FLAG_PHYOK) == 0) 1397 phy = 24; 1398 error = mii_attach(dev, &sc->xl_miibus, ifp, xl_ifmedia_upd, 1399 xl_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, 1400 sc->xl_type == XL_TYPE_905B ? MIIF_DOPAUSE : 0); 1401 if (error != 0) { 1402 device_printf(dev, "attaching PHYs failed\n"); 1403 goto fail; 1404 } 1405 goto done; 1406 } 1407 1408 /* 1409 * Sanity check. If the user has selected "auto" and this isn't 1410 * a 10/100 card of some kind, we need to force the transceiver 1411 * type to something sane. 1412 */ 1413 if (sc->xl_xcvr == XL_XCVR_AUTO) 1414 xl_choose_xcvr(sc, bootverbose); 1415 1416 /* 1417 * Do ifmedia setup. 1418 */ 1419 if (sc->xl_media & XL_MEDIAOPT_BT) { 1420 if (bootverbose) 1421 device_printf(dev, "found 10baseT\n"); 1422 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); 1423 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); 1424 if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) 1425 ifmedia_add(&sc->ifmedia, 1426 IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); 1427 } 1428 1429 if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) { 1430 /* 1431 * Check for a 10baseFL board in disguise. 1432 */ 1433 if (sc->xl_type == XL_TYPE_905B && 1434 sc->xl_media == XL_MEDIAOPT_10FL) { 1435 if (bootverbose) 1436 device_printf(dev, "found 10baseFL\n"); 1437 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_FL, 0, NULL); 1438 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_FL|IFM_HDX, 1439 0, NULL); 1440 if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) 1441 ifmedia_add(&sc->ifmedia, 1442 IFM_ETHER|IFM_10_FL|IFM_FDX, 0, NULL); 1443 } else { 1444 if (bootverbose) 1445 device_printf(dev, "found AUI\n"); 1446 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL); 1447 } 1448 } 1449 1450 if (sc->xl_media & XL_MEDIAOPT_BNC) { 1451 if (bootverbose) 1452 device_printf(dev, "found BNC\n"); 1453 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL); 1454 } 1455 1456 if (sc->xl_media & XL_MEDIAOPT_BFX) { 1457 if (bootverbose) 1458 device_printf(dev, "found 100baseFX\n"); 1459 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_FX, 0, NULL); 1460 } 1461 1462 media = IFM_ETHER|IFM_100_TX|IFM_FDX; 1463 xl_choose_media(sc, &media); 1464 1465 if (sc->xl_miibus == NULL) 1466 ifmedia_set(&sc->ifmedia, media); 1467 1468done: 1469 if (sc->xl_flags & XL_FLAG_NO_XCVR_PWR) { 1470 XL_SEL_WIN(0); 1471 CSR_WRITE_2(sc, XL_W0_MFG_ID, XL_NO_XCVR_PWR_MAGICBITS); 1472 } 1473 1474 /* 1475 * Call MI attach routine. 1476 */ 1477 ether_ifattach(ifp, eaddr); 1478 1479 error = bus_setup_intr(dev, sc->xl_irq, INTR_TYPE_NET | INTR_MPSAFE, 1480 NULL, xl_intr, sc, &sc->xl_intrhand); 1481 if (error) { 1482 device_printf(dev, "couldn't set up irq\n"); 1483 ether_ifdetach(ifp); 1484 goto fail; 1485 } 1486 1487fail: 1488 if (error) 1489 xl_detach(dev); 1490 1491 return (error); 1492} 1493 1494/* 1495 * Choose a default media. 1496 * XXX This is a leaf function only called by xl_attach() and 1497 * acquires/releases the non-recursible driver mutex to 1498 * satisfy lock assertions. 1499 */ 1500static void 1501xl_choose_media(struct xl_softc *sc, int *media) 1502{ 1503 1504 XL_LOCK(sc); 1505 1506 switch (sc->xl_xcvr) { 1507 case XL_XCVR_10BT: 1508 *media = IFM_ETHER|IFM_10_T; 1509 xl_setmode(sc, *media); 1510 break; 1511 case XL_XCVR_AUI: 1512 if (sc->xl_type == XL_TYPE_905B && 1513 sc->xl_media == XL_MEDIAOPT_10FL) { 1514 *media = IFM_ETHER|IFM_10_FL; 1515 xl_setmode(sc, *media); 1516 } else { 1517 *media = IFM_ETHER|IFM_10_5; 1518 xl_setmode(sc, *media); 1519 } 1520 break; 1521 case XL_XCVR_COAX: 1522 *media = IFM_ETHER|IFM_10_2; 1523 xl_setmode(sc, *media); 1524 break; 1525 case XL_XCVR_AUTO: 1526 case XL_XCVR_100BTX: 1527 case XL_XCVR_MII: 1528 /* Chosen by miibus */ 1529 break; 1530 case XL_XCVR_100BFX: 1531 *media = IFM_ETHER|IFM_100_FX; 1532 break; 1533 default: 1534 device_printf(sc->xl_dev, "unknown XCVR type: %d\n", 1535 sc->xl_xcvr); 1536 /* 1537 * This will probably be wrong, but it prevents 1538 * the ifmedia code from panicking. 1539 */ 1540 *media = IFM_ETHER|IFM_10_T; 1541 break; 1542 } 1543 1544 XL_UNLOCK(sc); 1545} 1546 1547/* 1548 * Shutdown hardware and free up resources. This can be called any 1549 * time after the mutex has been initialized. It is called in both 1550 * the error case in attach and the normal detach case so it needs 1551 * to be careful about only freeing resources that have actually been 1552 * allocated. 1553 */ 1554static int 1555xl_detach(device_t dev) 1556{ 1557 struct xl_softc *sc; 1558 struct ifnet *ifp; 1559 int rid, res; 1560 1561 sc = device_get_softc(dev); 1562 ifp = sc->xl_ifp; 1563 1564 KASSERT(mtx_initialized(&sc->xl_mtx), ("xl mutex not initialized")); 1565 1566#ifdef DEVICE_POLLING 1567 if (ifp && ifp->if_capenable & IFCAP_POLLING) 1568 ether_poll_deregister(ifp); 1569#endif 1570 1571 if (sc->xl_flags & XL_FLAG_USE_MMIO) { 1572 rid = XL_PCI_LOMEM; 1573 res = SYS_RES_MEMORY; 1574 } else { 1575 rid = XL_PCI_LOIO; 1576 res = SYS_RES_IOPORT; 1577 } 1578 1579 /* These should only be active if attach succeeded */ 1580 if (device_is_attached(dev)) { 1581 XL_LOCK(sc); 1582 xl_stop(sc); 1583 XL_UNLOCK(sc); 1584 taskqueue_drain(taskqueue_swi, &sc->xl_task); 1585 callout_drain(&sc->xl_tick_callout); 1586 ether_ifdetach(ifp); 1587 } 1588 if (sc->xl_miibus) 1589 device_delete_child(dev, sc->xl_miibus); 1590 bus_generic_detach(dev); 1591 ifmedia_removeall(&sc->ifmedia); 1592 1593 if (sc->xl_intrhand) 1594 bus_teardown_intr(dev, sc->xl_irq, sc->xl_intrhand); 1595 if (sc->xl_irq) 1596 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->xl_irq); 1597 if (sc->xl_fres != NULL) 1598 bus_release_resource(dev, SYS_RES_MEMORY, 1599 XL_PCI_FUNCMEM, sc->xl_fres); 1600 if (sc->xl_res) 1601 bus_release_resource(dev, res, rid, sc->xl_res); 1602 1603 if (ifp) 1604 if_free(ifp); 1605 1606 if (sc->xl_mtag) { 1607 bus_dmamap_destroy(sc->xl_mtag, sc->xl_tmpmap); 1608 bus_dma_tag_destroy(sc->xl_mtag); 1609 } 1610 if (sc->xl_ldata.xl_rx_tag) { 1611 bus_dmamap_unload(sc->xl_ldata.xl_rx_tag, 1612 sc->xl_ldata.xl_rx_dmamap); 1613 bus_dmamem_free(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_list, 1614 sc->xl_ldata.xl_rx_dmamap); 1615 bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag); 1616 } 1617 if (sc->xl_ldata.xl_tx_tag) { 1618 bus_dmamap_unload(sc->xl_ldata.xl_tx_tag, 1619 sc->xl_ldata.xl_tx_dmamap); 1620 bus_dmamem_free(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_list, 1621 sc->xl_ldata.xl_tx_dmamap); 1622 bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag); 1623 } 1624 1625 mtx_destroy(&sc->xl_mtx); 1626 1627 return (0); 1628} 1629 1630/* 1631 * Initialize the transmit descriptors. 1632 */ 1633static int 1634xl_list_tx_init(struct xl_softc *sc) 1635{ 1636 struct xl_chain_data *cd; 1637 struct xl_list_data *ld; 1638 int error, i; 1639 1640 XL_LOCK_ASSERT(sc); 1641 1642 cd = &sc->xl_cdata; 1643 ld = &sc->xl_ldata; 1644 for (i = 0; i < XL_TX_LIST_CNT; i++) { 1645 cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i]; 1646 error = bus_dmamap_create(sc->xl_mtag, 0, 1647 &cd->xl_tx_chain[i].xl_map); 1648 if (error) 1649 return (error); 1650 cd->xl_tx_chain[i].xl_phys = ld->xl_tx_dmaaddr + 1651 i * sizeof(struct xl_list); 1652 if (i == (XL_TX_LIST_CNT - 1)) 1653 cd->xl_tx_chain[i].xl_next = NULL; 1654 else 1655 cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1]; 1656 } 1657 1658 cd->xl_tx_free = &cd->xl_tx_chain[0]; 1659 cd->xl_tx_tail = cd->xl_tx_head = NULL; 1660 1661 bus_dmamap_sync(ld->xl_tx_tag, ld->xl_tx_dmamap, BUS_DMASYNC_PREWRITE); 1662 return (0); 1663} 1664 1665/* 1666 * Initialize the transmit descriptors. 1667 */ 1668static int 1669xl_list_tx_init_90xB(struct xl_softc *sc) 1670{ 1671 struct xl_chain_data *cd; 1672 struct xl_list_data *ld; 1673 int error, i; 1674 1675 XL_LOCK_ASSERT(sc); 1676 1677 cd = &sc->xl_cdata; 1678 ld = &sc->xl_ldata; 1679 for (i = 0; i < XL_TX_LIST_CNT; i++) { 1680 cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i]; 1681 error = bus_dmamap_create(sc->xl_mtag, 0, 1682 &cd->xl_tx_chain[i].xl_map); 1683 if (error) 1684 return (error); 1685 cd->xl_tx_chain[i].xl_phys = ld->xl_tx_dmaaddr + 1686 i * sizeof(struct xl_list); 1687 if (i == (XL_TX_LIST_CNT - 1)) 1688 cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[0]; 1689 else 1690 cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1]; 1691 if (i == 0) 1692 cd->xl_tx_chain[i].xl_prev = 1693 &cd->xl_tx_chain[XL_TX_LIST_CNT - 1]; 1694 else 1695 cd->xl_tx_chain[i].xl_prev = 1696 &cd->xl_tx_chain[i - 1]; 1697 } 1698 1699 bzero(ld->xl_tx_list, XL_TX_LIST_SZ); 1700 ld->xl_tx_list[0].xl_status = htole32(XL_TXSTAT_EMPTY); 1701 1702 cd->xl_tx_prod = 1; 1703 cd->xl_tx_cons = 1; 1704 cd->xl_tx_cnt = 0; 1705 1706 bus_dmamap_sync(ld->xl_tx_tag, ld->xl_tx_dmamap, BUS_DMASYNC_PREWRITE); 1707 return (0); 1708} 1709 1710/* 1711 * Initialize the RX descriptors and allocate mbufs for them. Note that 1712 * we arrange the descriptors in a closed ring, so that the last descriptor 1713 * points back to the first. 1714 */ 1715static int 1716xl_list_rx_init(struct xl_softc *sc) 1717{ 1718 struct xl_chain_data *cd; 1719 struct xl_list_data *ld; 1720 int error, i, next; 1721 u_int32_t nextptr; 1722 1723 XL_LOCK_ASSERT(sc); 1724 1725 cd = &sc->xl_cdata; 1726 ld = &sc->xl_ldata; 1727 1728 for (i = 0; i < XL_RX_LIST_CNT; i++) { 1729 cd->xl_rx_chain[i].xl_ptr = &ld->xl_rx_list[i]; 1730 error = bus_dmamap_create(sc->xl_mtag, 0, 1731 &cd->xl_rx_chain[i].xl_map); 1732 if (error) 1733 return (error); 1734 error = xl_newbuf(sc, &cd->xl_rx_chain[i]); 1735 if (error) 1736 return (error); 1737 if (i == (XL_RX_LIST_CNT - 1)) 1738 next = 0; 1739 else 1740 next = i + 1; 1741 nextptr = ld->xl_rx_dmaaddr + 1742 next * sizeof(struct xl_list_onefrag); 1743 cd->xl_rx_chain[i].xl_next = &cd->xl_rx_chain[next]; 1744 ld->xl_rx_list[i].xl_next = htole32(nextptr); 1745 } 1746 1747 bus_dmamap_sync(ld->xl_rx_tag, ld->xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1748 cd->xl_rx_head = &cd->xl_rx_chain[0]; 1749 1750 return (0); 1751} 1752 1753/* 1754 * Initialize an RX descriptor and attach an MBUF cluster. 1755 * If we fail to do so, we need to leave the old mbuf and 1756 * the old DMA map untouched so that it can be reused. 1757 */ 1758static int 1759xl_newbuf(struct xl_softc *sc, struct xl_chain_onefrag *c) 1760{ 1761 struct mbuf *m_new = NULL; 1762 bus_dmamap_t map; 1763 bus_dma_segment_t segs[1]; 1764 int error, nseg; 1765 1766 XL_LOCK_ASSERT(sc); 1767 1768 m_new = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1769 if (m_new == NULL) 1770 return (ENOBUFS); 1771 1772 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 1773 1774 /* Force longword alignment for packet payload. */ 1775 m_adj(m_new, ETHER_ALIGN); 1776 1777 error = bus_dmamap_load_mbuf_sg(sc->xl_mtag, sc->xl_tmpmap, m_new, 1778 segs, &nseg, BUS_DMA_NOWAIT); 1779 if (error) { 1780 m_freem(m_new); 1781 device_printf(sc->xl_dev, "can't map mbuf (error %d)\n", 1782 error); 1783 return (error); 1784 } 1785 KASSERT(nseg == 1, 1786 ("%s: too many DMA segments (%d)", __func__, nseg)); 1787 1788 bus_dmamap_unload(sc->xl_mtag, c->xl_map); 1789 map = c->xl_map; 1790 c->xl_map = sc->xl_tmpmap; 1791 sc->xl_tmpmap = map; 1792 c->xl_mbuf = m_new; 1793 c->xl_ptr->xl_frag.xl_len = htole32(m_new->m_len | XL_LAST_FRAG); 1794 c->xl_ptr->xl_frag.xl_addr = htole32(segs->ds_addr); 1795 c->xl_ptr->xl_status = 0; 1796 bus_dmamap_sync(sc->xl_mtag, c->xl_map, BUS_DMASYNC_PREREAD); 1797 return (0); 1798} 1799 1800static int 1801xl_rx_resync(struct xl_softc *sc) 1802{ 1803 struct xl_chain_onefrag *pos; 1804 int i; 1805 1806 XL_LOCK_ASSERT(sc); 1807 1808 pos = sc->xl_cdata.xl_rx_head; 1809 1810 for (i = 0; i < XL_RX_LIST_CNT; i++) { 1811 if (pos->xl_ptr->xl_status) 1812 break; 1813 pos = pos->xl_next; 1814 } 1815 1816 if (i == XL_RX_LIST_CNT) 1817 return (0); 1818 1819 sc->xl_cdata.xl_rx_head = pos; 1820 1821 return (EAGAIN); 1822} 1823 1824/* 1825 * A frame has been uploaded: pass the resulting mbuf chain up to 1826 * the higher level protocols. 1827 */ 1828static int 1829xl_rxeof(struct xl_softc *sc) 1830{ 1831 struct mbuf *m; 1832 struct ifnet *ifp = sc->xl_ifp; 1833 struct xl_chain_onefrag *cur_rx; 1834 int total_len; 1835 int rx_npkts = 0; 1836 u_int32_t rxstat; 1837 1838 XL_LOCK_ASSERT(sc); 1839again: 1840 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_dmamap, 1841 BUS_DMASYNC_POSTREAD); 1842 while ((rxstat = le32toh(sc->xl_cdata.xl_rx_head->xl_ptr->xl_status))) { 1843#ifdef DEVICE_POLLING 1844 if (ifp->if_capenable & IFCAP_POLLING) { 1845 if (sc->rxcycles <= 0) 1846 break; 1847 sc->rxcycles--; 1848 } 1849#endif 1850 cur_rx = sc->xl_cdata.xl_rx_head; 1851 sc->xl_cdata.xl_rx_head = cur_rx->xl_next; 1852 total_len = rxstat & XL_RXSTAT_LENMASK; 1853 rx_npkts++; 1854 1855 /* 1856 * Since we have told the chip to allow large frames, 1857 * we need to trap giant frame errors in software. We allow 1858 * a little more than the normal frame size to account for 1859 * frames with VLAN tags. 1860 */ 1861 if (total_len > XL_MAX_FRAMELEN) 1862 rxstat |= (XL_RXSTAT_UP_ERROR|XL_RXSTAT_OVERSIZE); 1863 1864 /* 1865 * If an error occurs, update stats, clear the 1866 * status word and leave the mbuf cluster in place: 1867 * it should simply get re-used next time this descriptor 1868 * comes up in the ring. 1869 */ 1870 if (rxstat & XL_RXSTAT_UP_ERROR) { 1871 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 1872 cur_rx->xl_ptr->xl_status = 0; 1873 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1874 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1875 continue; 1876 } 1877 1878 /* 1879 * If the error bit was not set, the upload complete 1880 * bit should be set which means we have a valid packet. 1881 * If not, something truly strange has happened. 1882 */ 1883 if (!(rxstat & XL_RXSTAT_UP_CMPLT)) { 1884 device_printf(sc->xl_dev, 1885 "bad receive status -- packet dropped\n"); 1886 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 1887 cur_rx->xl_ptr->xl_status = 0; 1888 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1889 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1890 continue; 1891 } 1892 1893 /* No errors; receive the packet. */ 1894 bus_dmamap_sync(sc->xl_mtag, cur_rx->xl_map, 1895 BUS_DMASYNC_POSTREAD); 1896 m = cur_rx->xl_mbuf; 1897 1898 /* 1899 * Try to conjure up a new mbuf cluster. If that 1900 * fails, it means we have an out of memory condition and 1901 * should leave the buffer in place and continue. This will 1902 * result in a lost packet, but there's little else we 1903 * can do in this situation. 1904 */ 1905 if (xl_newbuf(sc, cur_rx)) { 1906 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 1907 cur_rx->xl_ptr->xl_status = 0; 1908 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1909 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1910 continue; 1911 } 1912 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1913 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1914 1915 if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1); 1916 m->m_pkthdr.rcvif = ifp; 1917 m->m_pkthdr.len = m->m_len = total_len; 1918 1919 if (ifp->if_capenable & IFCAP_RXCSUM) { 1920 /* Do IP checksum checking. */ 1921 if (rxstat & XL_RXSTAT_IPCKOK) 1922 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 1923 if (!(rxstat & XL_RXSTAT_IPCKERR)) 1924 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 1925 if ((rxstat & XL_RXSTAT_TCPCOK && 1926 !(rxstat & XL_RXSTAT_TCPCKERR)) || 1927 (rxstat & XL_RXSTAT_UDPCKOK && 1928 !(rxstat & XL_RXSTAT_UDPCKERR))) { 1929 m->m_pkthdr.csum_flags |= 1930 CSUM_DATA_VALID|CSUM_PSEUDO_HDR; 1931 m->m_pkthdr.csum_data = 0xffff; 1932 } 1933 } 1934 1935 XL_UNLOCK(sc); 1936 (*ifp->if_input)(ifp, m); 1937 XL_LOCK(sc); 1938 1939 /* 1940 * If we are running from the taskqueue, the interface 1941 * might have been stopped while we were passing the last 1942 * packet up the network stack. 1943 */ 1944 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) 1945 return (rx_npkts); 1946 } 1947 1948 /* 1949 * Handle the 'end of channel' condition. When the upload 1950 * engine hits the end of the RX ring, it will stall. This 1951 * is our cue to flush the RX ring, reload the uplist pointer 1952 * register and unstall the engine. 1953 * XXX This is actually a little goofy. With the ThunderLAN 1954 * chip, you get an interrupt when the receiver hits the end 1955 * of the receive ring, which tells you exactly when you 1956 * you need to reload the ring pointer. Here we have to 1957 * fake it. I'm mad at myself for not being clever enough 1958 * to avoid the use of a goto here. 1959 */ 1960 if (CSR_READ_4(sc, XL_UPLIST_PTR) == 0 || 1961 CSR_READ_4(sc, XL_UPLIST_STATUS) & XL_PKTSTAT_UP_STALLED) { 1962 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL); 1963 xl_wait(sc); 1964 CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->xl_ldata.xl_rx_dmaaddr); 1965 sc->xl_cdata.xl_rx_head = &sc->xl_cdata.xl_rx_chain[0]; 1966 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL); 1967 goto again; 1968 } 1969 return (rx_npkts); 1970} 1971 1972/* 1973 * Taskqueue wrapper for xl_rxeof(). 1974 */ 1975static void 1976xl_rxeof_task(void *arg, int pending) 1977{ 1978 struct xl_softc *sc = (struct xl_softc *)arg; 1979 1980 XL_LOCK(sc); 1981 if (sc->xl_ifp->if_drv_flags & IFF_DRV_RUNNING) 1982 xl_rxeof(sc); 1983 XL_UNLOCK(sc); 1984} 1985 1986/* 1987 * A frame was downloaded to the chip. It's safe for us to clean up 1988 * the list buffers. 1989 */ 1990static void 1991xl_txeof(struct xl_softc *sc) 1992{ 1993 struct xl_chain *cur_tx; 1994 struct ifnet *ifp = sc->xl_ifp; 1995 1996 XL_LOCK_ASSERT(sc); 1997 1998 /* 1999 * Go through our tx list and free mbufs for those 2000 * frames that have been uploaded. Note: the 3c905B 2001 * sets a special bit in the status word to let us 2002 * know that a frame has been downloaded, but the 2003 * original 3c900/3c905 adapters don't do that. 2004 * Consequently, we have to use a different test if 2005 * xl_type != XL_TYPE_905B. 2006 */ 2007 while (sc->xl_cdata.xl_tx_head != NULL) { 2008 cur_tx = sc->xl_cdata.xl_tx_head; 2009 2010 if (CSR_READ_4(sc, XL_DOWNLIST_PTR)) 2011 break; 2012 2013 sc->xl_cdata.xl_tx_head = cur_tx->xl_next; 2014 bus_dmamap_sync(sc->xl_mtag, cur_tx->xl_map, 2015 BUS_DMASYNC_POSTWRITE); 2016 bus_dmamap_unload(sc->xl_mtag, cur_tx->xl_map); 2017 m_freem(cur_tx->xl_mbuf); 2018 cur_tx->xl_mbuf = NULL; 2019 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 2020 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2021 2022 cur_tx->xl_next = sc->xl_cdata.xl_tx_free; 2023 sc->xl_cdata.xl_tx_free = cur_tx; 2024 } 2025 2026 if (sc->xl_cdata.xl_tx_head == NULL) { 2027 sc->xl_wdog_timer = 0; 2028 sc->xl_cdata.xl_tx_tail = NULL; 2029 } else { 2030 if (CSR_READ_4(sc, XL_DMACTL) & XL_DMACTL_DOWN_STALLED || 2031 !CSR_READ_4(sc, XL_DOWNLIST_PTR)) { 2032 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2033 sc->xl_cdata.xl_tx_head->xl_phys); 2034 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2035 } 2036 } 2037} 2038 2039static void 2040xl_txeof_90xB(struct xl_softc *sc) 2041{ 2042 struct xl_chain *cur_tx = NULL; 2043 struct ifnet *ifp = sc->xl_ifp; 2044 int idx; 2045 2046 XL_LOCK_ASSERT(sc); 2047 2048 bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap, 2049 BUS_DMASYNC_POSTREAD); 2050 idx = sc->xl_cdata.xl_tx_cons; 2051 while (idx != sc->xl_cdata.xl_tx_prod) { 2052 cur_tx = &sc->xl_cdata.xl_tx_chain[idx]; 2053 2054 if (!(le32toh(cur_tx->xl_ptr->xl_status) & 2055 XL_TXSTAT_DL_COMPLETE)) 2056 break; 2057 2058 if (cur_tx->xl_mbuf != NULL) { 2059 bus_dmamap_sync(sc->xl_mtag, cur_tx->xl_map, 2060 BUS_DMASYNC_POSTWRITE); 2061 bus_dmamap_unload(sc->xl_mtag, cur_tx->xl_map); 2062 m_freem(cur_tx->xl_mbuf); 2063 cur_tx->xl_mbuf = NULL; 2064 } 2065 2066 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 2067 2068 sc->xl_cdata.xl_tx_cnt--; 2069 XL_INC(idx, XL_TX_LIST_CNT); 2070 } 2071 2072 if (sc->xl_cdata.xl_tx_cnt == 0) 2073 sc->xl_wdog_timer = 0; 2074 sc->xl_cdata.xl_tx_cons = idx; 2075 2076 if (cur_tx != NULL) 2077 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2078} 2079 2080/* 2081 * TX 'end of channel' interrupt handler. Actually, we should 2082 * only get a 'TX complete' interrupt if there's a transmit error, 2083 * so this is really TX error handler. 2084 */ 2085static void 2086xl_txeoc(struct xl_softc *sc) 2087{ 2088 u_int8_t txstat; 2089 2090 XL_LOCK_ASSERT(sc); 2091 2092 while ((txstat = CSR_READ_1(sc, XL_TX_STATUS))) { 2093 if (txstat & XL_TXSTATUS_UNDERRUN || 2094 txstat & XL_TXSTATUS_JABBER || 2095 txstat & XL_TXSTATUS_RECLAIM) { 2096 device_printf(sc->xl_dev, 2097 "transmission error: 0x%02x\n", txstat); 2098 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 2099 xl_wait(sc); 2100 if (sc->xl_type == XL_TYPE_905B) { 2101 if (sc->xl_cdata.xl_tx_cnt) { 2102 int i; 2103 struct xl_chain *c; 2104 2105 i = sc->xl_cdata.xl_tx_cons; 2106 c = &sc->xl_cdata.xl_tx_chain[i]; 2107 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2108 c->xl_phys); 2109 CSR_WRITE_1(sc, XL_DOWN_POLL, 64); 2110 sc->xl_wdog_timer = 5; 2111 } 2112 } else { 2113 if (sc->xl_cdata.xl_tx_head != NULL) { 2114 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2115 sc->xl_cdata.xl_tx_head->xl_phys); 2116 sc->xl_wdog_timer = 5; 2117 } 2118 } 2119 /* 2120 * Remember to set this for the 2121 * first generation 3c90X chips. 2122 */ 2123 CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8); 2124 if (txstat & XL_TXSTATUS_UNDERRUN && 2125 sc->xl_tx_thresh < XL_PACKET_SIZE) { 2126 sc->xl_tx_thresh += XL_MIN_FRAMELEN; 2127 device_printf(sc->xl_dev, 2128"tx underrun, increasing tx start threshold to %d bytes\n", sc->xl_tx_thresh); 2129 } 2130 CSR_WRITE_2(sc, XL_COMMAND, 2131 XL_CMD_TX_SET_START|sc->xl_tx_thresh); 2132 if (sc->xl_type == XL_TYPE_905B) { 2133 CSR_WRITE_2(sc, XL_COMMAND, 2134 XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4)); 2135 } 2136 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); 2137 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2138 } else { 2139 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); 2140 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2141 } 2142 /* 2143 * Write an arbitrary byte to the TX_STATUS register 2144 * to clear this interrupt/error and advance to the next. 2145 */ 2146 CSR_WRITE_1(sc, XL_TX_STATUS, 0x01); 2147 } 2148} 2149 2150static void 2151xl_intr(void *arg) 2152{ 2153 struct xl_softc *sc = arg; 2154 struct ifnet *ifp = sc->xl_ifp; 2155 u_int16_t status; 2156 2157 XL_LOCK(sc); 2158 2159#ifdef DEVICE_POLLING 2160 if (ifp->if_capenable & IFCAP_POLLING) { 2161 XL_UNLOCK(sc); 2162 return; 2163 } 2164#endif 2165 2166 for (;;) { 2167 status = CSR_READ_2(sc, XL_STATUS); 2168 if ((status & XL_INTRS) == 0 || status == 0xFFFF) 2169 break; 2170 CSR_WRITE_2(sc, XL_COMMAND, 2171 XL_CMD_INTR_ACK|(status & XL_INTRS)); 2172 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 2173 break; 2174 2175 if (status & XL_STAT_UP_COMPLETE) { 2176 if (xl_rxeof(sc) == 0) { 2177 while (xl_rx_resync(sc)) 2178 xl_rxeof(sc); 2179 } 2180 } 2181 2182 if (status & XL_STAT_DOWN_COMPLETE) { 2183 if (sc->xl_type == XL_TYPE_905B) 2184 xl_txeof_90xB(sc); 2185 else 2186 xl_txeof(sc); 2187 } 2188 2189 if (status & XL_STAT_TX_COMPLETE) { 2190 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 2191 xl_txeoc(sc); 2192 } 2193 2194 if (status & XL_STAT_ADFAIL) { 2195 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2196 xl_init_locked(sc); 2197 break; 2198 } 2199 2200 if (status & XL_STAT_STATSOFLOW) 2201 xl_stats_update(sc); 2202 } 2203 2204 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2205 ifp->if_drv_flags & IFF_DRV_RUNNING) { 2206 if (sc->xl_type == XL_TYPE_905B) 2207 xl_start_90xB_locked(ifp); 2208 else 2209 xl_start_locked(ifp); 2210 } 2211 2212 XL_UNLOCK(sc); 2213} 2214 2215#ifdef DEVICE_POLLING 2216static int 2217xl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 2218{ 2219 struct xl_softc *sc = ifp->if_softc; 2220 int rx_npkts = 0; 2221 2222 XL_LOCK(sc); 2223 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 2224 rx_npkts = xl_poll_locked(ifp, cmd, count); 2225 XL_UNLOCK(sc); 2226 return (rx_npkts); 2227} 2228 2229static int 2230xl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) 2231{ 2232 struct xl_softc *sc = ifp->if_softc; 2233 int rx_npkts; 2234 2235 XL_LOCK_ASSERT(sc); 2236 2237 sc->rxcycles = count; 2238 rx_npkts = xl_rxeof(sc); 2239 if (sc->xl_type == XL_TYPE_905B) 2240 xl_txeof_90xB(sc); 2241 else 2242 xl_txeof(sc); 2243 2244 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { 2245 if (sc->xl_type == XL_TYPE_905B) 2246 xl_start_90xB_locked(ifp); 2247 else 2248 xl_start_locked(ifp); 2249 } 2250 2251 if (cmd == POLL_AND_CHECK_STATUS) { 2252 u_int16_t status; 2253 2254 status = CSR_READ_2(sc, XL_STATUS); 2255 if (status & XL_INTRS && status != 0xFFFF) { 2256 CSR_WRITE_2(sc, XL_COMMAND, 2257 XL_CMD_INTR_ACK|(status & XL_INTRS)); 2258 2259 if (status & XL_STAT_TX_COMPLETE) { 2260 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 2261 xl_txeoc(sc); 2262 } 2263 2264 if (status & XL_STAT_ADFAIL) { 2265 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2266 xl_init_locked(sc); 2267 } 2268 2269 if (status & XL_STAT_STATSOFLOW) 2270 xl_stats_update(sc); 2271 } 2272 } 2273 return (rx_npkts); 2274} 2275#endif /* DEVICE_POLLING */ 2276 2277static void 2278xl_tick(void *xsc) 2279{ 2280 struct xl_softc *sc = xsc; 2281 struct mii_data *mii; 2282 2283 XL_LOCK_ASSERT(sc); 2284 2285 if (sc->xl_miibus != NULL) { 2286 mii = device_get_softc(sc->xl_miibus); 2287 mii_tick(mii); 2288 } 2289 2290 xl_stats_update(sc); 2291 if (xl_watchdog(sc) == EJUSTRETURN) 2292 return; 2293 2294 callout_reset(&sc->xl_tick_callout, hz, xl_tick, sc); 2295} 2296 2297static void 2298xl_stats_update(struct xl_softc *sc) 2299{ 2300 struct ifnet *ifp = sc->xl_ifp; 2301 struct xl_stats xl_stats; 2302 u_int8_t *p; 2303 int i; 2304 2305 XL_LOCK_ASSERT(sc); 2306 2307 bzero((char *)&xl_stats, sizeof(struct xl_stats)); 2308 2309 p = (u_int8_t *)&xl_stats; 2310 2311 /* Read all the stats registers. */ 2312 XL_SEL_WIN(6); 2313 2314 for (i = 0; i < 16; i++) 2315 *p++ = CSR_READ_1(sc, XL_W6_CARRIER_LOST + i); 2316 2317 if_inc_counter(ifp, IFCOUNTER_IERRORS, xl_stats.xl_rx_overrun); 2318 2319 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, 2320 xl_stats.xl_tx_multi_collision + 2321 xl_stats.xl_tx_single_collision + 2322 xl_stats.xl_tx_late_collision); 2323 2324 /* 2325 * Boomerang and cyclone chips have an extra stats counter 2326 * in window 4 (BadSSD). We have to read this too in order 2327 * to clear out all the stats registers and avoid a statsoflow 2328 * interrupt. 2329 */ 2330 XL_SEL_WIN(4); 2331 CSR_READ_1(sc, XL_W4_BADSSD); 2332 XL_SEL_WIN(7); 2333} 2334 2335/* 2336 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 2337 * pointers to the fragment pointers. 2338 */ 2339static int 2340xl_encap(struct xl_softc *sc, struct xl_chain *c, struct mbuf **m_head) 2341{ 2342 struct mbuf *m_new; 2343 struct ifnet *ifp = sc->xl_ifp; 2344 int error, i, nseg, total_len; 2345 u_int32_t status; 2346 2347 XL_LOCK_ASSERT(sc); 2348 2349 error = bus_dmamap_load_mbuf_sg(sc->xl_mtag, c->xl_map, *m_head, 2350 sc->xl_cdata.xl_tx_segs, &nseg, BUS_DMA_NOWAIT); 2351 2352 if (error && error != EFBIG) { 2353 if_printf(ifp, "can't map mbuf (error %d)\n", error); 2354 return (error); 2355 } 2356 2357 /* 2358 * Handle special case: we used up all 63 fragments, 2359 * but we have more mbufs left in the chain. Copy the 2360 * data into an mbuf cluster. Note that we don't 2361 * bother clearing the values in the other fragment 2362 * pointers/counters; it wouldn't gain us anything, 2363 * and would waste cycles. 2364 */ 2365 if (error) { 2366 m_new = m_collapse(*m_head, M_NOWAIT, XL_MAXFRAGS); 2367 if (m_new == NULL) { 2368 m_freem(*m_head); 2369 *m_head = NULL; 2370 return (ENOBUFS); 2371 } 2372 *m_head = m_new; 2373 2374 error = bus_dmamap_load_mbuf_sg(sc->xl_mtag, c->xl_map, 2375 *m_head, sc->xl_cdata.xl_tx_segs, &nseg, BUS_DMA_NOWAIT); 2376 if (error) { 2377 m_freem(*m_head); 2378 *m_head = NULL; 2379 if_printf(ifp, "can't map mbuf (error %d)\n", error); 2380 return (error); 2381 } 2382 } 2383 2384 KASSERT(nseg <= XL_MAXFRAGS, 2385 ("%s: too many DMA segments (%d)", __func__, nseg)); 2386 if (nseg == 0) { 2387 m_freem(*m_head); 2388 *m_head = NULL; 2389 return (EIO); 2390 } 2391 bus_dmamap_sync(sc->xl_mtag, c->xl_map, BUS_DMASYNC_PREWRITE); 2392 2393 total_len = 0; 2394 for (i = 0; i < nseg; i++) { 2395 KASSERT(sc->xl_cdata.xl_tx_segs[i].ds_len <= MCLBYTES, 2396 ("segment size too large")); 2397 c->xl_ptr->xl_frag[i].xl_addr = 2398 htole32(sc->xl_cdata.xl_tx_segs[i].ds_addr); 2399 c->xl_ptr->xl_frag[i].xl_len = 2400 htole32(sc->xl_cdata.xl_tx_segs[i].ds_len); 2401 total_len += sc->xl_cdata.xl_tx_segs[i].ds_len; 2402 } 2403 c->xl_ptr->xl_frag[nseg - 1].xl_len |= htole32(XL_LAST_FRAG); 2404 2405 if (sc->xl_type == XL_TYPE_905B) { 2406 status = XL_TXSTAT_RND_DEFEAT; 2407 2408#ifndef XL905B_TXCSUM_BROKEN 2409 if ((*m_head)->m_pkthdr.csum_flags) { 2410 if ((*m_head)->m_pkthdr.csum_flags & CSUM_IP) 2411 status |= XL_TXSTAT_IPCKSUM; 2412 if ((*m_head)->m_pkthdr.csum_flags & CSUM_TCP) 2413 status |= XL_TXSTAT_TCPCKSUM; 2414 if ((*m_head)->m_pkthdr.csum_flags & CSUM_UDP) 2415 status |= XL_TXSTAT_UDPCKSUM; 2416 } 2417#endif 2418 } else 2419 status = total_len; 2420 c->xl_ptr->xl_status = htole32(status); 2421 c->xl_ptr->xl_next = 0; 2422 2423 c->xl_mbuf = *m_head; 2424 return (0); 2425} 2426 2427/* 2428 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 2429 * to the mbuf data regions directly in the transmit lists. We also save a 2430 * copy of the pointers since the transmit list fragment pointers are 2431 * physical addresses. 2432 */ 2433 2434static void 2435xl_start(struct ifnet *ifp) 2436{ 2437 struct xl_softc *sc = ifp->if_softc; 2438 2439 XL_LOCK(sc); 2440 2441 if (sc->xl_type == XL_TYPE_905B) 2442 xl_start_90xB_locked(ifp); 2443 else 2444 xl_start_locked(ifp); 2445 2446 XL_UNLOCK(sc); 2447} 2448 2449static void 2450xl_start_locked(struct ifnet *ifp) 2451{ 2452 struct xl_softc *sc = ifp->if_softc; 2453 struct mbuf *m_head; 2454 struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx; 2455 struct xl_chain *prev_tx; 2456 int error; 2457 2458 XL_LOCK_ASSERT(sc); 2459 2460 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 2461 IFF_DRV_RUNNING) 2462 return; 2463 /* 2464 * Check for an available queue slot. If there are none, 2465 * punt. 2466 */ 2467 if (sc->xl_cdata.xl_tx_free == NULL) { 2468 xl_txeoc(sc); 2469 xl_txeof(sc); 2470 if (sc->xl_cdata.xl_tx_free == NULL) { 2471 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2472 return; 2473 } 2474 } 2475 2476 start_tx = sc->xl_cdata.xl_tx_free; 2477 2478 for (; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2479 sc->xl_cdata.xl_tx_free != NULL;) { 2480 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 2481 if (m_head == NULL) 2482 break; 2483 2484 /* Pick a descriptor off the free list. */ 2485 prev_tx = cur_tx; 2486 cur_tx = sc->xl_cdata.xl_tx_free; 2487 2488 /* Pack the data into the descriptor. */ 2489 error = xl_encap(sc, cur_tx, &m_head); 2490 if (error) { 2491 cur_tx = prev_tx; 2492 if (m_head == NULL) 2493 break; 2494 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2495 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 2496 break; 2497 } 2498 2499 sc->xl_cdata.xl_tx_free = cur_tx->xl_next; 2500 cur_tx->xl_next = NULL; 2501 2502 /* Chain it together. */ 2503 if (prev != NULL) { 2504 prev->xl_next = cur_tx; 2505 prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys); 2506 } 2507 prev = cur_tx; 2508 2509 /* 2510 * If there's a BPF listener, bounce a copy of this frame 2511 * to him. 2512 */ 2513 BPF_MTAP(ifp, cur_tx->xl_mbuf); 2514 } 2515 2516 /* 2517 * If there are no packets queued, bail. 2518 */ 2519 if (cur_tx == NULL) 2520 return; 2521 2522 /* 2523 * Place the request for the upload interrupt 2524 * in the last descriptor in the chain. This way, if 2525 * we're chaining several packets at once, we'll only 2526 * get an interrupt once for the whole chain rather than 2527 * once for each packet. 2528 */ 2529 cur_tx->xl_ptr->xl_status |= htole32(XL_TXSTAT_DL_INTR); 2530 2531 /* 2532 * Queue the packets. If the TX channel is clear, update 2533 * the downlist pointer register. 2534 */ 2535 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL); 2536 xl_wait(sc); 2537 2538 if (sc->xl_cdata.xl_tx_head != NULL) { 2539 sc->xl_cdata.xl_tx_tail->xl_next = start_tx; 2540 sc->xl_cdata.xl_tx_tail->xl_ptr->xl_next = 2541 htole32(start_tx->xl_phys); 2542 sc->xl_cdata.xl_tx_tail->xl_ptr->xl_status &= 2543 htole32(~XL_TXSTAT_DL_INTR); 2544 sc->xl_cdata.xl_tx_tail = cur_tx; 2545 } else { 2546 sc->xl_cdata.xl_tx_head = start_tx; 2547 sc->xl_cdata.xl_tx_tail = cur_tx; 2548 } 2549 bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap, 2550 BUS_DMASYNC_PREWRITE); 2551 if (!CSR_READ_4(sc, XL_DOWNLIST_PTR)) 2552 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, start_tx->xl_phys); 2553 2554 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2555 2556 XL_SEL_WIN(7); 2557 2558 /* 2559 * Set a timeout in case the chip goes out to lunch. 2560 */ 2561 sc->xl_wdog_timer = 5; 2562 2563 /* 2564 * XXX Under certain conditions, usually on slower machines 2565 * where interrupts may be dropped, it's possible for the 2566 * adapter to chew up all the buffers in the receive ring 2567 * and stall, without us being able to do anything about it. 2568 * To guard against this, we need to make a pass over the 2569 * RX queue to make sure there aren't any packets pending. 2570 * Doing it here means we can flush the receive ring at the 2571 * same time the chip is DMAing the transmit descriptors we 2572 * just gave it. 2573 * 2574 * 3Com goes to some lengths to emphasize the Parallel Tasking (tm) 2575 * nature of their chips in all their marketing literature; 2576 * we may as well take advantage of it. :) 2577 */ 2578 taskqueue_enqueue(taskqueue_swi, &sc->xl_task); 2579} 2580 2581static void 2582xl_start_90xB_locked(struct ifnet *ifp) 2583{ 2584 struct xl_softc *sc = ifp->if_softc; 2585 struct mbuf *m_head; 2586 struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx; 2587 struct xl_chain *prev_tx; 2588 int error, idx; 2589 2590 XL_LOCK_ASSERT(sc); 2591 2592 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 2593 IFF_DRV_RUNNING) 2594 return; 2595 2596 idx = sc->xl_cdata.xl_tx_prod; 2597 start_tx = &sc->xl_cdata.xl_tx_chain[idx]; 2598 2599 for (; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2600 sc->xl_cdata.xl_tx_chain[idx].xl_mbuf == NULL;) { 2601 if ((XL_TX_LIST_CNT - sc->xl_cdata.xl_tx_cnt) < 3) { 2602 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2603 break; 2604 } 2605 2606 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 2607 if (m_head == NULL) 2608 break; 2609 2610 prev_tx = cur_tx; 2611 cur_tx = &sc->xl_cdata.xl_tx_chain[idx]; 2612 2613 /* Pack the data into the descriptor. */ 2614 error = xl_encap(sc, cur_tx, &m_head); 2615 if (error) { 2616 cur_tx = prev_tx; 2617 if (m_head == NULL) 2618 break; 2619 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2620 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 2621 break; 2622 } 2623 2624 /* Chain it together. */ 2625 if (prev != NULL) 2626 prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys); 2627 prev = cur_tx; 2628 2629 /* 2630 * If there's a BPF listener, bounce a copy of this frame 2631 * to him. 2632 */ 2633 BPF_MTAP(ifp, cur_tx->xl_mbuf); 2634 2635 XL_INC(idx, XL_TX_LIST_CNT); 2636 sc->xl_cdata.xl_tx_cnt++; 2637 } 2638 2639 /* 2640 * If there are no packets queued, bail. 2641 */ 2642 if (cur_tx == NULL) 2643 return; 2644 2645 /* 2646 * Place the request for the upload interrupt 2647 * in the last descriptor in the chain. This way, if 2648 * we're chaining several packets at once, we'll only 2649 * get an interrupt once for the whole chain rather than 2650 * once for each packet. 2651 */ 2652 cur_tx->xl_ptr->xl_status |= htole32(XL_TXSTAT_DL_INTR); 2653 2654 /* Start transmission */ 2655 sc->xl_cdata.xl_tx_prod = idx; 2656 start_tx->xl_prev->xl_ptr->xl_next = htole32(start_tx->xl_phys); 2657 bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap, 2658 BUS_DMASYNC_PREWRITE); 2659 2660 /* 2661 * Set a timeout in case the chip goes out to lunch. 2662 */ 2663 sc->xl_wdog_timer = 5; 2664} 2665 2666static void 2667xl_init(void *xsc) 2668{ 2669 struct xl_softc *sc = xsc; 2670 2671 XL_LOCK(sc); 2672 xl_init_locked(sc); 2673 XL_UNLOCK(sc); 2674} 2675 2676static void 2677xl_init_locked(struct xl_softc *sc) 2678{ 2679 struct ifnet *ifp = sc->xl_ifp; 2680 int error, i; 2681 struct mii_data *mii = NULL; 2682 2683 XL_LOCK_ASSERT(sc); 2684 2685 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) 2686 return; 2687 /* 2688 * Cancel pending I/O and free all RX/TX buffers. 2689 */ 2690 xl_stop(sc); 2691 2692 /* Reset the chip to a known state. */ 2693 xl_reset(sc); 2694 2695 if (sc->xl_miibus == NULL) { 2696 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 2697 xl_wait(sc); 2698 } 2699 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 2700 xl_wait(sc); 2701 DELAY(10000); 2702 2703 if (sc->xl_miibus != NULL) 2704 mii = device_get_softc(sc->xl_miibus); 2705 2706 /* 2707 * Clear WOL status and disable all WOL feature as WOL 2708 * would interfere Rx operation under normal environments. 2709 */ 2710 if ((sc->xl_flags & XL_FLAG_WOL) != 0) { 2711 XL_SEL_WIN(7); 2712 CSR_READ_2(sc, XL_W7_BM_PME); 2713 CSR_WRITE_2(sc, XL_W7_BM_PME, 0); 2714 } 2715 /* Init our MAC address */ 2716 XL_SEL_WIN(2); 2717 for (i = 0; i < ETHER_ADDR_LEN; i++) { 2718 CSR_WRITE_1(sc, XL_W2_STATION_ADDR_LO + i, 2719 IF_LLADDR(sc->xl_ifp)[i]); 2720 } 2721 2722 /* Clear the station mask. */ 2723 for (i = 0; i < 3; i++) 2724 CSR_WRITE_2(sc, XL_W2_STATION_MASK_LO + (i * 2), 0); 2725#ifdef notdef 2726 /* Reset TX and RX. */ 2727 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 2728 xl_wait(sc); 2729 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 2730 xl_wait(sc); 2731#endif 2732 /* Init circular RX list. */ 2733 error = xl_list_rx_init(sc); 2734 if (error) { 2735 device_printf(sc->xl_dev, "initialization of the rx ring failed (%d)\n", 2736 error); 2737 xl_stop(sc); 2738 return; 2739 } 2740 2741 /* Init TX descriptors. */ 2742 if (sc->xl_type == XL_TYPE_905B) 2743 error = xl_list_tx_init_90xB(sc); 2744 else 2745 error = xl_list_tx_init(sc); 2746 if (error) { 2747 device_printf(sc->xl_dev, "initialization of the tx ring failed (%d)\n", 2748 error); 2749 xl_stop(sc); 2750 return; 2751 } 2752 2753 /* 2754 * Set the TX freethresh value. 2755 * Note that this has no effect on 3c905B "cyclone" 2756 * cards but is required for 3c900/3c905 "boomerang" 2757 * cards in order to enable the download engine. 2758 */ 2759 CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8); 2760 2761 /* Set the TX start threshold for best performance. */ 2762 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_SET_START|sc->xl_tx_thresh); 2763 2764 /* 2765 * If this is a 3c905B, also set the tx reclaim threshold. 2766 * This helps cut down on the number of tx reclaim errors 2767 * that could happen on a busy network. The chip multiplies 2768 * the register value by 16 to obtain the actual threshold 2769 * in bytes, so we divide by 16 when setting the value here. 2770 * The existing threshold value can be examined by reading 2771 * the register at offset 9 in window 5. 2772 */ 2773 if (sc->xl_type == XL_TYPE_905B) { 2774 CSR_WRITE_2(sc, XL_COMMAND, 2775 XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4)); 2776 } 2777 2778 /* Set RX filter bits. */ 2779 xl_rxfilter(sc); 2780 2781 /* 2782 * Load the address of the RX list. We have to 2783 * stall the upload engine before we can manipulate 2784 * the uplist pointer register, then unstall it when 2785 * we're finished. We also have to wait for the 2786 * stall command to complete before proceeding. 2787 * Note that we have to do this after any RX resets 2788 * have completed since the uplist register is cleared 2789 * by a reset. 2790 */ 2791 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL); 2792 xl_wait(sc); 2793 CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->xl_ldata.xl_rx_dmaaddr); 2794 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL); 2795 xl_wait(sc); 2796 2797 if (sc->xl_type == XL_TYPE_905B) { 2798 /* Set polling interval */ 2799 CSR_WRITE_1(sc, XL_DOWN_POLL, 64); 2800 /* Load the address of the TX list */ 2801 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL); 2802 xl_wait(sc); 2803 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2804 sc->xl_cdata.xl_tx_chain[0].xl_phys); 2805 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2806 xl_wait(sc); 2807 } 2808 2809 /* 2810 * If the coax transceiver is on, make sure to enable 2811 * the DC-DC converter. 2812 */ 2813 XL_SEL_WIN(3); 2814 if (sc->xl_xcvr == XL_XCVR_COAX) 2815 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START); 2816 else 2817 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 2818 2819 /* 2820 * increase packet size to allow reception of 802.1q or ISL packets. 2821 * For the 3c90x chip, set the 'allow large packets' bit in the MAC 2822 * control register. For 3c90xB/C chips, use the RX packet size 2823 * register. 2824 */ 2825 2826 if (sc->xl_type == XL_TYPE_905B) 2827 CSR_WRITE_2(sc, XL_W3_MAXPKTSIZE, XL_PACKET_SIZE); 2828 else { 2829 u_int8_t macctl; 2830 macctl = CSR_READ_1(sc, XL_W3_MAC_CTRL); 2831 macctl |= XL_MACCTRL_ALLOW_LARGE_PACK; 2832 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, macctl); 2833 } 2834 2835 /* Clear out the stats counters. */ 2836 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE); 2837 xl_stats_update(sc); 2838 XL_SEL_WIN(4); 2839 CSR_WRITE_2(sc, XL_W4_NET_DIAG, XL_NETDIAG_UPPER_BYTES_ENABLE); 2840 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_ENABLE); 2841 2842 /* 2843 * Enable interrupts. 2844 */ 2845 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|0xFF); 2846 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|XL_INTRS); 2847#ifdef DEVICE_POLLING 2848 /* Disable interrupts if we are polling. */ 2849 if (ifp->if_capenable & IFCAP_POLLING) 2850 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); 2851 else 2852#endif 2853 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|XL_INTRS); 2854 if (sc->xl_flags & XL_FLAG_FUNCREG) 2855 bus_space_write_4(sc->xl_ftag, sc->xl_fhandle, 4, 0x8000); 2856 2857 /* Set the RX early threshold */ 2858 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_THRESH|(XL_PACKET_SIZE >>2)); 2859 CSR_WRITE_4(sc, XL_DMACTL, XL_DMACTL_UP_RX_EARLY); 2860 2861 /* Enable receiver and transmitter. */ 2862 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); 2863 xl_wait(sc); 2864 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE); 2865 xl_wait(sc); 2866 2867 /* XXX Downcall to miibus. */ 2868 if (mii != NULL) 2869 mii_mediachg(mii); 2870 2871 /* Select window 7 for normal operations. */ 2872 XL_SEL_WIN(7); 2873 2874 ifp->if_drv_flags |= IFF_DRV_RUNNING; 2875 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2876 2877 sc->xl_wdog_timer = 0; 2878 callout_reset(&sc->xl_tick_callout, hz, xl_tick, sc); 2879} 2880 2881/* 2882 * Set media options. 2883 */ 2884static int 2885xl_ifmedia_upd(struct ifnet *ifp) 2886{ 2887 struct xl_softc *sc = ifp->if_softc; 2888 struct ifmedia *ifm = NULL; 2889 struct mii_data *mii = NULL; 2890 2891 XL_LOCK(sc); 2892 2893 if (sc->xl_miibus != NULL) 2894 mii = device_get_softc(sc->xl_miibus); 2895 if (mii == NULL) 2896 ifm = &sc->ifmedia; 2897 else 2898 ifm = &mii->mii_media; 2899 2900 switch (IFM_SUBTYPE(ifm->ifm_media)) { 2901 case IFM_100_FX: 2902 case IFM_10_FL: 2903 case IFM_10_2: 2904 case IFM_10_5: 2905 xl_setmode(sc, ifm->ifm_media); 2906 XL_UNLOCK(sc); 2907 return (0); 2908 } 2909 2910 if (sc->xl_media & XL_MEDIAOPT_MII || 2911 sc->xl_media & XL_MEDIAOPT_BTX || 2912 sc->xl_media & XL_MEDIAOPT_BT4) { 2913 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2914 xl_init_locked(sc); 2915 } else { 2916 xl_setmode(sc, ifm->ifm_media); 2917 } 2918 2919 XL_UNLOCK(sc); 2920 2921 return (0); 2922} 2923 2924/* 2925 * Report current media status. 2926 */ 2927static void 2928xl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 2929{ 2930 struct xl_softc *sc = ifp->if_softc; 2931 u_int32_t icfg; 2932 u_int16_t status = 0; 2933 struct mii_data *mii = NULL; 2934 2935 XL_LOCK(sc); 2936 2937 if (sc->xl_miibus != NULL) 2938 mii = device_get_softc(sc->xl_miibus); 2939 2940 XL_SEL_WIN(4); 2941 status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); 2942 2943 XL_SEL_WIN(3); 2944 icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG) & XL_ICFG_CONNECTOR_MASK; 2945 icfg >>= XL_ICFG_CONNECTOR_BITS; 2946 2947 ifmr->ifm_active = IFM_ETHER; 2948 ifmr->ifm_status = IFM_AVALID; 2949 2950 if ((status & XL_MEDIASTAT_CARRIER) == 0) 2951 ifmr->ifm_status |= IFM_ACTIVE; 2952 2953 switch (icfg) { 2954 case XL_XCVR_10BT: 2955 ifmr->ifm_active = IFM_ETHER|IFM_10_T; 2956 if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX) 2957 ifmr->ifm_active |= IFM_FDX; 2958 else 2959 ifmr->ifm_active |= IFM_HDX; 2960 break; 2961 case XL_XCVR_AUI: 2962 if (sc->xl_type == XL_TYPE_905B && 2963 sc->xl_media == XL_MEDIAOPT_10FL) { 2964 ifmr->ifm_active = IFM_ETHER|IFM_10_FL; 2965 if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX) 2966 ifmr->ifm_active |= IFM_FDX; 2967 else 2968 ifmr->ifm_active |= IFM_HDX; 2969 } else 2970 ifmr->ifm_active = IFM_ETHER|IFM_10_5; 2971 break; 2972 case XL_XCVR_COAX: 2973 ifmr->ifm_active = IFM_ETHER|IFM_10_2; 2974 break; 2975 /* 2976 * XXX MII and BTX/AUTO should be separate cases. 2977 */ 2978 2979 case XL_XCVR_100BTX: 2980 case XL_XCVR_AUTO: 2981 case XL_XCVR_MII: 2982 if (mii != NULL) { 2983 mii_pollstat(mii); 2984 ifmr->ifm_active = mii->mii_media_active; 2985 ifmr->ifm_status = mii->mii_media_status; 2986 } 2987 break; 2988 case XL_XCVR_100BFX: 2989 ifmr->ifm_active = IFM_ETHER|IFM_100_FX; 2990 break; 2991 default: 2992 if_printf(ifp, "unknown XCVR type: %d\n", icfg); 2993 break; 2994 } 2995 2996 XL_UNLOCK(sc); 2997} 2998 2999static int 3000xl_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 3001{ 3002 struct xl_softc *sc = ifp->if_softc; 3003 struct ifreq *ifr = (struct ifreq *) data; 3004 int error = 0, mask; 3005 struct mii_data *mii = NULL; 3006 3007 switch (command) { 3008 case SIOCSIFFLAGS: 3009 XL_LOCK(sc); 3010 if (ifp->if_flags & IFF_UP) { 3011 if (ifp->if_drv_flags & IFF_DRV_RUNNING && 3012 (ifp->if_flags ^ sc->xl_if_flags) & 3013 (IFF_PROMISC | IFF_ALLMULTI)) 3014 xl_rxfilter(sc); 3015 else 3016 xl_init_locked(sc); 3017 } else { 3018 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3019 xl_stop(sc); 3020 } 3021 sc->xl_if_flags = ifp->if_flags; 3022 XL_UNLOCK(sc); 3023 break; 3024 case SIOCADDMULTI: 3025 case SIOCDELMULTI: 3026 /* XXX Downcall from if_addmulti() possibly with locks held. */ 3027 XL_LOCK(sc); 3028 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3029 xl_rxfilter(sc); 3030 XL_UNLOCK(sc); 3031 break; 3032 case SIOCGIFMEDIA: 3033 case SIOCSIFMEDIA: 3034 if (sc->xl_miibus != NULL) 3035 mii = device_get_softc(sc->xl_miibus); 3036 if (mii == NULL) 3037 error = ifmedia_ioctl(ifp, ifr, 3038 &sc->ifmedia, command); 3039 else 3040 error = ifmedia_ioctl(ifp, ifr, 3041 &mii->mii_media, command); 3042 break; 3043 case SIOCSIFCAP: 3044 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 3045#ifdef DEVICE_POLLING 3046 if ((mask & IFCAP_POLLING) != 0 && 3047 (ifp->if_capabilities & IFCAP_POLLING) != 0) { 3048 ifp->if_capenable ^= IFCAP_POLLING; 3049 if ((ifp->if_capenable & IFCAP_POLLING) != 0) { 3050 error = ether_poll_register(xl_poll, ifp); 3051 if (error) 3052 break; 3053 XL_LOCK(sc); 3054 /* Disable interrupts */ 3055 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); 3056 ifp->if_capenable |= IFCAP_POLLING; 3057 XL_UNLOCK(sc); 3058 } else { 3059 error = ether_poll_deregister(ifp); 3060 /* Enable interrupts. */ 3061 XL_LOCK(sc); 3062 CSR_WRITE_2(sc, XL_COMMAND, 3063 XL_CMD_INTR_ACK | 0xFF); 3064 CSR_WRITE_2(sc, XL_COMMAND, 3065 XL_CMD_INTR_ENB | XL_INTRS); 3066 if (sc->xl_flags & XL_FLAG_FUNCREG) 3067 bus_space_write_4(sc->xl_ftag, 3068 sc->xl_fhandle, 4, 0x8000); 3069 XL_UNLOCK(sc); 3070 } 3071 } 3072#endif /* DEVICE_POLLING */ 3073 XL_LOCK(sc); 3074 if ((mask & IFCAP_TXCSUM) != 0 && 3075 (ifp->if_capabilities & IFCAP_TXCSUM) != 0) { 3076 ifp->if_capenable ^= IFCAP_TXCSUM; 3077 if ((ifp->if_capenable & IFCAP_TXCSUM) != 0) 3078 ifp->if_hwassist |= XL905B_CSUM_FEATURES; 3079 else 3080 ifp->if_hwassist &= ~XL905B_CSUM_FEATURES; 3081 } 3082 if ((mask & IFCAP_RXCSUM) != 0 && 3083 (ifp->if_capabilities & IFCAP_RXCSUM) != 0) 3084 ifp->if_capenable ^= IFCAP_RXCSUM; 3085 if ((mask & IFCAP_WOL_MAGIC) != 0 && 3086 (ifp->if_capabilities & IFCAP_WOL_MAGIC) != 0) 3087 ifp->if_capenable ^= IFCAP_WOL_MAGIC; 3088 XL_UNLOCK(sc); 3089 break; 3090 default: 3091 error = ether_ioctl(ifp, command, data); 3092 break; 3093 } 3094 3095 return (error); 3096} 3097 3098static int 3099xl_watchdog(struct xl_softc *sc) 3100{ 3101 struct ifnet *ifp = sc->xl_ifp; 3102 u_int16_t status = 0; 3103 int misintr; 3104 3105 XL_LOCK_ASSERT(sc); 3106 3107 if (sc->xl_wdog_timer == 0 || --sc->xl_wdog_timer != 0) 3108 return (0); 3109 3110 xl_rxeof(sc); 3111 xl_txeoc(sc); 3112 misintr = 0; 3113 if (sc->xl_type == XL_TYPE_905B) { 3114 xl_txeof_90xB(sc); 3115 if (sc->xl_cdata.xl_tx_cnt == 0) 3116 misintr++; 3117 } else { 3118 xl_txeof(sc); 3119 if (sc->xl_cdata.xl_tx_head == NULL) 3120 misintr++; 3121 } 3122 if (misintr != 0) { 3123 device_printf(sc->xl_dev, 3124 "watchdog timeout (missed Tx interrupts) -- recovering\n"); 3125 return (0); 3126 } 3127 3128 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 3129 XL_SEL_WIN(4); 3130 status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); 3131 device_printf(sc->xl_dev, "watchdog timeout\n"); 3132 3133 if (status & XL_MEDIASTAT_CARRIER) 3134 device_printf(sc->xl_dev, 3135 "no carrier - transceiver cable problem?\n"); 3136 3137 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3138 xl_init_locked(sc); 3139 3140 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { 3141 if (sc->xl_type == XL_TYPE_905B) 3142 xl_start_90xB_locked(ifp); 3143 else 3144 xl_start_locked(ifp); 3145 } 3146 3147 return (EJUSTRETURN); 3148} 3149 3150/* 3151 * Stop the adapter and free any mbufs allocated to the 3152 * RX and TX lists. 3153 */ 3154static void 3155xl_stop(struct xl_softc *sc) 3156{ 3157 int i; 3158 struct ifnet *ifp = sc->xl_ifp; 3159 3160 XL_LOCK_ASSERT(sc); 3161 3162 sc->xl_wdog_timer = 0; 3163 3164 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISABLE); 3165 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE); 3166 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB); 3167 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISCARD); 3168 xl_wait(sc); 3169 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_DISABLE); 3170 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 3171 DELAY(800); 3172 3173#ifdef foo 3174 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 3175 xl_wait(sc); 3176 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 3177 xl_wait(sc); 3178#endif 3179 3180 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|XL_STAT_INTLATCH); 3181 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|0); 3182 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); 3183 if (sc->xl_flags & XL_FLAG_FUNCREG) 3184 bus_space_write_4(sc->xl_ftag, sc->xl_fhandle, 4, 0x8000); 3185 3186 /* Stop the stats updater. */ 3187 callout_stop(&sc->xl_tick_callout); 3188 3189 /* 3190 * Free data in the RX lists. 3191 */ 3192 for (i = 0; i < XL_RX_LIST_CNT; i++) { 3193 if (sc->xl_cdata.xl_rx_chain[i].xl_mbuf != NULL) { 3194 bus_dmamap_unload(sc->xl_mtag, 3195 sc->xl_cdata.xl_rx_chain[i].xl_map); 3196 bus_dmamap_destroy(sc->xl_mtag, 3197 sc->xl_cdata.xl_rx_chain[i].xl_map); 3198 m_freem(sc->xl_cdata.xl_rx_chain[i].xl_mbuf); 3199 sc->xl_cdata.xl_rx_chain[i].xl_mbuf = NULL; 3200 } 3201 } 3202 if (sc->xl_ldata.xl_rx_list != NULL) 3203 bzero(sc->xl_ldata.xl_rx_list, XL_RX_LIST_SZ); 3204 /* 3205 * Free the TX list buffers. 3206 */ 3207 for (i = 0; i < XL_TX_LIST_CNT; i++) { 3208 if (sc->xl_cdata.xl_tx_chain[i].xl_mbuf != NULL) { 3209 bus_dmamap_unload(sc->xl_mtag, 3210 sc->xl_cdata.xl_tx_chain[i].xl_map); 3211 bus_dmamap_destroy(sc->xl_mtag, 3212 sc->xl_cdata.xl_tx_chain[i].xl_map); 3213 m_freem(sc->xl_cdata.xl_tx_chain[i].xl_mbuf); 3214 sc->xl_cdata.xl_tx_chain[i].xl_mbuf = NULL; 3215 } 3216 } 3217 if (sc->xl_ldata.xl_tx_list != NULL) 3218 bzero(sc->xl_ldata.xl_tx_list, XL_TX_LIST_SZ); 3219 3220 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 3221} 3222 3223/* 3224 * Stop all chip I/O so that the kernel's probe routines don't 3225 * get confused by errant DMAs when rebooting. 3226 */ 3227static int 3228xl_shutdown(device_t dev) 3229{ 3230 3231 return (xl_suspend(dev)); 3232} 3233 3234static int 3235xl_suspend(device_t dev) 3236{ 3237 struct xl_softc *sc; 3238 3239 sc = device_get_softc(dev); 3240 3241 XL_LOCK(sc); 3242 xl_stop(sc); 3243 xl_setwol(sc); 3244 XL_UNLOCK(sc); 3245 3246 return (0); 3247} 3248 3249static int 3250xl_resume(device_t dev) 3251{ 3252 struct xl_softc *sc; 3253 struct ifnet *ifp; 3254 3255 sc = device_get_softc(dev); 3256 ifp = sc->xl_ifp; 3257 3258 XL_LOCK(sc); 3259 3260 if (ifp->if_flags & IFF_UP) { 3261 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3262 xl_init_locked(sc); 3263 } 3264 3265 XL_UNLOCK(sc); 3266 3267 return (0); 3268} 3269 3270static void 3271xl_setwol(struct xl_softc *sc) 3272{ 3273 struct ifnet *ifp; 3274 u_int16_t cfg, pmstat; 3275 3276 if ((sc->xl_flags & XL_FLAG_WOL) == 0) 3277 return; 3278 3279 ifp = sc->xl_ifp; 3280 XL_SEL_WIN(7); 3281 /* Clear any pending PME events. */ 3282 CSR_READ_2(sc, XL_W7_BM_PME); 3283 cfg = 0; 3284 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3285 cfg |= XL_BM_PME_MAGIC; 3286 CSR_WRITE_2(sc, XL_W7_BM_PME, cfg); 3287 /* Enable RX. */ 3288 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3289 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE); 3290 /* Request PME. */ 3291 pmstat = pci_read_config(sc->xl_dev, 3292 sc->xl_pmcap + PCIR_POWER_STATUS, 2); 3293 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3294 pmstat |= PCIM_PSTAT_PMEENABLE; 3295 else 3296 pmstat &= ~PCIM_PSTAT_PMEENABLE; 3297 pci_write_config(sc->xl_dev, 3298 sc->xl_pmcap + PCIR_POWER_STATUS, pmstat, 2); 3299} 3300