1/*- 2 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. Neither the name of the author nor the names of any co-contributors 13 * may be used to endorse or promote products derived from this software 14 * without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD 29 * 30 * $FreeBSD$ 31 */ 32 33/* 34 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 35 * 36 * 37 * Name: mpi2_targ.h 38 * Title: MPI Target mode messages and structures 39 * Creation Date: September 8, 2006 40 * 41 * mpi2_targ.h Version: 02.00.09 42 * 43 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 44 * prefix are for use only on MPI v2.5 products, and must not be used 45 * with MPI v2.0 products. Unless otherwise noted, names beginning with 46 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 47 * 48 * Version History 49 * --------------- 50 * 51 * Date Version Description 52 * -------- -------- ------------------------------------------------------ 53 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 54 * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to 55 * BufferPostFlags field of CommandBufferPostBase Request. 56 * 02-29-08 02.00.02 Modified various names to make them 32-character unique. 57 * 10-02-08 02.00.03 Removed NextCmdBufferOffset from 58 * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. 59 * Target Status Send Request only takes a single SGE for 60 * response data. 61 * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure. 62 * 11-18-11 02.00.05 Incorporating additions for MPI v2.5. 63 * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT 64 * request message structure. 65 * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and 66 * MPI2_TARGET_MODE_ABORT_ALL_COMMANDS. 67 * 06-13-14 02.00.07 Added MinMSIxIndex and MaxMSIxIndex fields to 68 * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. 69 * 11-18-14 02.00.08 Updated copyright information. 70 * 03-16-15 02.00.09 Updated for MPI v2.6. 71 * Added MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH. 72 * -------------------------------------------------------------------------- 73 */ 74 75#ifndef MPI2_TARG_H 76#define MPI2_TARG_H 77 78/****************************************************************************** 79* 80* SCSI Target Messages 81* 82*******************************************************************************/ 83 84/**************************************************************************** 85* Target Command Buffer Post Base Request 86****************************************************************************/ 87 88typedef struct _MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST 89{ 90 U8 BufferPostFlags; /* 0x00 */ 91 U8 Reserved1; /* 0x01 */ 92 U8 ChainOffset; /* 0x02 */ 93 U8 Function; /* 0x03 */ 94 U16 TotalCmdBuffers; /* 0x04 */ 95 U8 Reserved; /* 0x06 */ 96 U8 MsgFlags; /* 0x07 */ 97 U8 VP_ID; /* 0x08 */ 98 U8 VF_ID; /* 0x09 */ 99 U16 Reserved2; /* 0x0A */ 100 U32 Reserved3; /* 0x0C */ 101 U16 CmdBufferLength; /* 0x10 */ 102 U8 MinMSIxIndex; /* 0x12 */ /* MPI 2.5 and newer only; Reserved in MPI 2.0 */ 103 U8 MaxMSIxIndex; /* 0x13 */ /* MPI 2.5 and newer only; Reserved in MPI 2.0 */ 104 U32 BaseAddressLow; /* 0x14 */ 105 U32 BaseAddressHigh; /* 0x18 */ 106} MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST, 107 MPI2_POINTER PTR_MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST, 108 Mpi2TargetCmdBufferPostBaseRequest_t, 109 MPI2_POINTER pMpi2TargetCmdBufferPostBaseRequest_t; 110 111/* values for the BufferPostflags field */ 112#define MPI2_CMD_BUF_POST_BASE_ADDRESS_SPACE_MASK (0x0C) 113#define MPI2_CMD_BUF_POST_BASE_SYSTEM_ADDRESS_SPACE (0x00) 114#define MPI2_CMD_BUF_POST_BASE_IOCDDR_ADDRESS_SPACE (0x04) 115#define MPI2_CMD_BUF_POST_BASE_IOCPLB_ADDRESS_SPACE (0x08) /* only for MPI v2.5 and earlier */ 116#define MPI26_CMD_BUF_POST_BASE_IOCCTL_ADDRESS_SPACE (0x08) /* for MPI v2.6 only */ 117#define MPI2_CMD_BUF_POST_BASE_IOCPLBNTA_ADDRESS_SPACE (0x0C) /* only for MPI v2.5 and earlier */ 118 119#define MPI2_CMD_BUF_POST_BASE_FLAGS_AUTO_POST_ALL (0x01) 120 121/**************************************************************************** 122* Target Command Buffer Post List Request 123****************************************************************************/ 124 125typedef struct _MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST 126{ 127 U16 Reserved; /* 0x00 */ 128 U8 ChainOffset; /* 0x02 */ 129 U8 Function; /* 0x03 */ 130 U16 CmdBufferCount; /* 0x04 */ 131 U8 Reserved1; /* 0x06 */ 132 U8 MsgFlags; /* 0x07 */ 133 U8 VP_ID; /* 0x08 */ 134 U8 VF_ID; /* 0x09 */ 135 U16 Reserved2; /* 0x0A */ 136 U32 Reserved3; /* 0x0C */ 137 U16 IoIndex[2]; /* 0x10 */ 138} MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST, 139 MPI2_POINTER PTR_MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST, 140 Mpi2TargetCmdBufferPostListRequest_t, 141 MPI2_POINTER pMpi2TargetCmdBufferPostListRequest_t; 142 143/**************************************************************************** 144* Target Command Buffer Post Base List Reply 145****************************************************************************/ 146 147typedef struct _MPI2_TARGET_BUF_POST_BASE_LIST_REPLY 148{ 149 U8 Flags; /* 0x00 */ 150 U8 Reserved; /* 0x01 */ 151 U8 MsgLength; /* 0x02 */ 152 U8 Function; /* 0x03 */ 153 U16 Reserved1; /* 0x04 */ 154 U8 Reserved2; /* 0x06 */ 155 U8 MsgFlags; /* 0x07 */ 156 U8 VP_ID; /* 0x08 */ 157 U8 VF_ID; /* 0x09 */ 158 U16 Reserved3; /* 0x0A */ 159 U16 Reserved4; /* 0x0C */ 160 U16 IOCStatus; /* 0x0E */ 161 U32 IOCLogInfo; /* 0x10 */ 162 U16 IoIndex; /* 0x14 */ 163 U16 Reserved5; /* 0x16 */ 164 U32 Reserved6; /* 0x18 */ 165} MPI2_TARGET_BUF_POST_BASE_LIST_REPLY, 166 MPI2_POINTER PTR_MPI2_TARGET_BUF_POST_BASE_LIST_REPLY, 167 Mpi2TargetCmdBufferPostBaseListReply_t, 168 MPI2_POINTER pMpi2TargetCmdBufferPostBaseListReply_t; 169 170/* Flags defines */ 171#define MPI2_CMD_BUF_POST_REPLY_IOINDEX_VALID (0x01) 172 173/**************************************************************************** 174* Command Buffer Formats (with 16 byte CDB) 175****************************************************************************/ 176 177typedef struct _MPI2_TARGET_SSP_CMD_BUFFER 178{ 179 U8 FrameType; /* 0x00 */ 180 U8 Reserved1; /* 0x01 */ 181 U16 InitiatorConnectionTag; /* 0x02 */ 182 U32 HashedSourceSASAddress; /* 0x04 */ 183 U16 Reserved2; /* 0x08 */ 184 U16 Flags; /* 0x0A */ 185 U32 Reserved3; /* 0x0C */ 186 U16 Tag; /* 0x10 */ 187 U16 TargetPortTransferTag; /* 0x12 */ 188 U32 DataOffset; /* 0x14 */ 189 /* COMMAND information unit starts here */ 190 U8 LogicalUnitNumber[8]; /* 0x18 */ 191 U8 Reserved4; /* 0x20 */ 192 U8 TaskAttribute; /* lower 3 bits */ /* 0x21 */ 193 U8 Reserved5; /* 0x22 */ 194 U8 AdditionalCDBLength; /* upper 5 bits */ /* 0x23 */ 195 U8 CDB[16]; /* 0x24 */ 196 /* Additional CDB bytes extend past the CDB field */ 197} MPI2_TARGET_SSP_CMD_BUFFER, MPI2_POINTER PTR_MPI2_TARGET_SSP_CMD_BUFFER, 198 Mpi2TargetSspCmdBuffer, MPI2_POINTER pMp2iTargetSspCmdBuffer; 199 200typedef struct _MPI2_TARGET_SSP_TASK_BUFFER 201{ 202 U8 FrameType; /* 0x00 */ 203 U8 Reserved1; /* 0x01 */ 204 U16 InitiatorConnectionTag; /* 0x02 */ 205 U32 HashedSourceSASAddress; /* 0x04 */ 206 U16 Reserved2; /* 0x08 */ 207 U16 Flags; /* 0x0A */ 208 U32 Reserved3; /* 0x0C */ 209 U16 Tag; /* 0x10 */ 210 U16 TargetPortTransferTag; /* 0x12 */ 211 U32 DataOffset; /* 0x14 */ 212 /* TASK information unit starts here */ 213 U8 LogicalUnitNumber[8]; /* 0x18 */ 214 U16 Reserved4; /* 0x20 */ 215 U8 TaskManagementFunction; /* 0x22 */ 216 U8 Reserved5; /* 0x23 */ 217 U16 ManagedTaskTag; /* 0x24 */ 218 U16 Reserved6; /* 0x26 */ 219 U32 Reserved7; /* 0x28 */ 220 U32 Reserved8; /* 0x2C */ 221 U32 Reserved9; /* 0x30 */ 222} MPI2_TARGET_SSP_TASK_BUFFER, MPI2_POINTER PTR_MPI2_TARGET_SSP_TASK_BUFFER, 223 Mpi2TargetSspTaskBuffer, MPI2_POINTER pMpi2TargetSspTaskBuffer; 224 225/* mask and shift for HashedSourceSASAddress field */ 226#define MPI2_TARGET_HASHED_SAS_ADDRESS_MASK (0xFFFFFF00) 227#define MPI2_TARGET_HASHED_SAS_ADDRESS_SHIFT (8) 228 229/**************************************************************************** 230* MPI v2.0 Target Assist Request 231****************************************************************************/ 232 233typedef struct _MPI2_TARGET_ASSIST_REQUEST 234{ 235 U8 Reserved1; /* 0x00 */ 236 U8 TargetAssistFlags; /* 0x01 */ 237 U8 ChainOffset; /* 0x02 */ 238 U8 Function; /* 0x03 */ 239 U16 QueueTag; /* 0x04 */ 240 U8 Reserved2; /* 0x06 */ 241 U8 MsgFlags; /* 0x07 */ 242 U8 VP_ID; /* 0x08 */ 243 U8 VF_ID; /* 0x09 */ 244 U16 Reserved3; /* 0x0A */ 245 U16 IoIndex; /* 0x0C */ 246 U16 InitiatorConnectionTag; /* 0x0E */ 247 U16 SGLFlags; /* 0x10 */ 248 U8 SequenceNumber; /* 0x12 */ 249 U8 Reserved4; /* 0x13 */ 250 U8 SGLOffset0; /* 0x14 */ 251 U8 SGLOffset1; /* 0x15 */ 252 U8 SGLOffset2; /* 0x16 */ 253 U8 SGLOffset3; /* 0x17 */ 254 U32 SkipCount; /* 0x18 */ 255 U32 DataLength; /* 0x1C */ 256 U32 BidirectionalDataLength; /* 0x20 */ 257 U16 IoFlags; /* 0x24 */ 258 U16 EEDPFlags; /* 0x26 */ 259 U32 EEDPBlockSize; /* 0x28 */ 260 U32 SecondaryReferenceTag; /* 0x2C */ 261 U16 SecondaryApplicationTag; /* 0x30 */ 262 U16 ApplicationTagTranslationMask; /* 0x32 */ 263 U32 PrimaryReferenceTag; /* 0x34 */ 264 U16 PrimaryApplicationTag; /* 0x38 */ 265 U16 PrimaryApplicationTagMask; /* 0x3A */ 266 U32 RelativeOffset; /* 0x3C */ 267 U32 Reserved5; /* 0x40 */ 268 U32 Reserved6; /* 0x44 */ 269 U32 Reserved7; /* 0x48 */ 270 U32 Reserved8; /* 0x4C */ 271 MPI2_SGE_IO_UNION SGL[1]; /* 0x50 */ 272} MPI2_TARGET_ASSIST_REQUEST, MPI2_POINTER PTR_MPI2_TARGET_ASSIST_REQUEST, 273 Mpi2TargetAssistRequest_t, MPI2_POINTER pMpi2TargetAssistRequest_t; 274 275/* Target Assist TargetAssistFlags bits */ 276 277#define MPI2_TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) 278#define MPI2_TARGET_ASSIST_FLAGS_TLR (0x10) 279#define MPI2_TARGET_ASSIST_FLAGS_RETRANSMIT (0x04) 280#define MPI2_TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02) 281#define MPI2_TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01) 282 283/* Target Assist SGLFlags bits */ 284 285/* base values for Data Location Address Space */ 286#define MPI2_TARGET_ASSIST_SGLFLAGS_ADDR_MASK (0x0C) 287#define MPI2_TARGET_ASSIST_SGLFLAGS_SYSTEM_ADDR (0x00) 288#define MPI2_TARGET_ASSIST_SGLFLAGS_IOCDDR_ADDR (0x04) 289#define MPI2_TARGET_ASSIST_SGLFLAGS_IOCPLB_ADDR (0x08) 290#define MPI2_TARGET_ASSIST_SGLFLAGS_PLBNTA_ADDR (0x0C) 291 292/* base values for Type */ 293#define MPI2_TARGET_ASSIST_SGLFLAGS_TYPE_MASK (0x03) 294#define MPI2_TARGET_ASSIST_SGLFLAGS_MPI_TYPE (0x00) 295#define MPI2_TARGET_ASSIST_SGLFLAGS_32IEEE_TYPE (0x01) 296#define MPI2_TARGET_ASSIST_SGLFLAGS_64IEEE_TYPE (0x02) 297 298/* shift values for each sub-field */ 299#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL3_SHIFT (12) 300#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL2_SHIFT (8) 301#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL1_SHIFT (4) 302#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL0_SHIFT (0) 303 304/* Target Assist IoFlags bits */ 305 306#define MPI2_TARGET_ASSIST_IOFLAGS_BIDIRECTIONAL (0x0800) 307#define MPI2_TARGET_ASSIST_IOFLAGS_MULTICAST (0x0400) 308#define MPI2_TARGET_ASSIST_IOFLAGS_RECEIVE_FIRST (0x0200) 309 310/* Target Assist EEDPFlags bits */ 311 312#define MPI2_TA_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 313#define MPI2_TA_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 314#define MPI2_TA_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 315#define MPI2_TA_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 316 317#define MPI2_TA_EEDPFLAGS_CHECK_REFTAG (0x0400) 318#define MPI2_TA_EEDPFLAGS_CHECK_APPTAG (0x0200) 319#define MPI2_TA_EEDPFLAGS_CHECK_GUARD (0x0100) 320 321#define MPI2_TA_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 322 323#define MPI2_TA_EEDPFLAGS_MASK_OP (0x0007) 324#define MPI2_TA_EEDPFLAGS_NOOP_OP (0x0000) 325#define MPI2_TA_EEDPFLAGS_CHECK_OP (0x0001) 326#define MPI2_TA_EEDPFLAGS_STRIP_OP (0x0002) 327#define MPI2_TA_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 328#define MPI2_TA_EEDPFLAGS_INSERT_OP (0x0004) 329#define MPI2_TA_EEDPFLAGS_REPLACE_OP (0x0006) 330#define MPI2_TA_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 331 332/**************************************************************************** 333* MPI v2.5 Target Assist Request 334****************************************************************************/ 335 336typedef struct _MPI25_TARGET_ASSIST_REQUEST 337{ 338 U8 Reserved1; /* 0x00 */ 339 U8 TargetAssistFlags; /* 0x01 */ 340 U8 ChainOffset; /* 0x02 */ 341 U8 Function; /* 0x03 */ 342 U16 QueueTag; /* 0x04 */ 343 U8 Reserved2; /* 0x06 */ 344 U8 MsgFlags; /* 0x07 */ 345 U8 VP_ID; /* 0x08 */ 346 U8 VF_ID; /* 0x09 */ 347 U16 Reserved3; /* 0x0A */ 348 U16 IoIndex; /* 0x0C */ 349 U16 InitiatorConnectionTag; /* 0x0E */ 350 U8 DMAFlags; /* 0x10 */ 351 U8 Reserved9; /* 0x11 */ 352 U8 SequenceNumber; /* 0x12 */ 353 U8 Reserved4; /* 0x13 */ 354 U8 SGLOffset0; /* 0x14 */ 355 U8 SGLOffset1; /* 0x15 */ 356 U8 SGLOffset2; /* 0x16 */ 357 U8 SGLOffset3; /* 0x17 */ 358 U32 SkipCount; /* 0x18 */ 359 U32 DataLength; /* 0x1C */ 360 U32 BidirectionalDataLength; /* 0x20 */ 361 U16 IoFlags; /* 0x24 */ 362 U16 EEDPFlags; /* 0x26 */ 363 U16 EEDPBlockSize; /* 0x28 */ 364 U16 Reserved10; /* 0x2A */ 365 U32 SecondaryReferenceTag; /* 0x2C */ 366 U16 SecondaryApplicationTag; /* 0x30 */ 367 U16 ApplicationTagTranslationMask; /* 0x32 */ 368 U32 PrimaryReferenceTag; /* 0x34 */ 369 U16 PrimaryApplicationTag; /* 0x38 */ 370 U16 PrimaryApplicationTagMask; /* 0x3A */ 371 U32 RelativeOffset; /* 0x3C */ 372 U32 Reserved5; /* 0x40 */ 373 U32 Reserved6; /* 0x44 */ 374 U32 Reserved7; /* 0x48 */ 375 U32 Reserved8; /* 0x4C */ 376 MPI25_SGE_IO_UNION SGL; /* 0x50 */ 377} MPI25_TARGET_ASSIST_REQUEST, MPI2_POINTER PTR_MPI25_TARGET_ASSIST_REQUEST, 378 Mpi25TargetAssistRequest_t, MPI2_POINTER pMpi25TargetAssistRequest_t; 379 380/* use MPI2_TARGET_ASSIST_FLAGS_ defines for the Flags field */ 381 382/* Defines for the DMAFlags field 383 * Each setting affects 4 SGLS, from SGL0 to SGL3. 384 * D = Data 385 * C = Cache DIF 386 * I = Interleaved 387 * H = Host DIF 388 */ 389#define MPI25_TA_DMAFLAGS_OP_MASK (0x0F) 390#define MPI25_TA_DMAFLAGS_OP_D_D_D_D (0x00) 391#define MPI25_TA_DMAFLAGS_OP_D_D_D_C (0x01) 392#define MPI25_TA_DMAFLAGS_OP_D_D_D_I (0x02) 393#define MPI25_TA_DMAFLAGS_OP_D_D_C_C (0x03) 394#define MPI25_TA_DMAFLAGS_OP_D_D_C_I (0x04) 395#define MPI25_TA_DMAFLAGS_OP_D_D_I_I (0x05) 396#define MPI25_TA_DMAFLAGS_OP_D_C_C_C (0x06) 397#define MPI25_TA_DMAFLAGS_OP_D_C_C_I (0x07) 398#define MPI25_TA_DMAFLAGS_OP_D_C_I_I (0x08) 399#define MPI25_TA_DMAFLAGS_OP_D_I_I_I (0x09) 400#define MPI25_TA_DMAFLAGS_OP_D_H_D_D (0x0A) 401#define MPI25_TA_DMAFLAGS_OP_D_H_D_C (0x0B) 402#define MPI25_TA_DMAFLAGS_OP_D_H_D_I (0x0C) 403#define MPI25_TA_DMAFLAGS_OP_D_H_C_C (0x0D) 404#define MPI25_TA_DMAFLAGS_OP_D_H_C_I (0x0E) 405#define MPI25_TA_DMAFLAGS_OP_D_H_I_I (0x0F) 406 407/* defines for the IoFlags field */ 408#define MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000) /* MPI v2.6 and later */ 409#define MPI25_TARGET_ASSIST_IOFLAGS_BIDIRECTIONAL (0x0800) 410#define MPI25_TARGET_ASSIST_IOFLAGS_RECEIVE_FIRST (0x0200) 411 412/* defines for the EEDPFlags field */ 413#define MPI25_TA_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 414#define MPI25_TA_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 415#define MPI25_TA_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 416#define MPI25_TA_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 417 418#define MPI25_TA_EEDPFLAGS_CHECK_REFTAG (0x0400) 419#define MPI25_TA_EEDPFLAGS_CHECK_APPTAG (0x0200) 420#define MPI25_TA_EEDPFLAGS_CHECK_GUARD (0x0100) 421 422#define MPI25_TA_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0) 423#define MPI25_TA_EEDPFLAGS_COMPATIBLE_MODE (0x0000) 424#define MPI25_TA_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040) 425#define MPI25_TA_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080) 426#define MPI25_TA_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0) 427 428#define MPI25_TA_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030) 429#define MPI25_TA_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000) 430#define MPI25_TA_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010) 431 432#define MPI25_TA_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 433 434#define MPI25_TA_EEDPFLAGS_MASK_OP (0x0007) 435#define MPI25_TA_EEDPFLAGS_NOOP_OP (0x0000) 436#define MPI25_TA_EEDPFLAGS_CHECK_OP (0x0001) 437#define MPI25_TA_EEDPFLAGS_STRIP_OP (0x0002) 438#define MPI25_TA_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 439#define MPI25_TA_EEDPFLAGS_INSERT_OP (0x0004) 440#define MPI25_TA_EEDPFLAGS_REPLACE_OP (0x0006) 441#define MPI25_TA_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 442 443/**************************************************************************** 444* Target Status Send Request 445****************************************************************************/ 446 447typedef struct _MPI2_TARGET_STATUS_SEND_REQUEST 448{ 449 U8 Reserved1; /* 0x00 */ 450 U8 StatusFlags; /* 0x01 */ 451 U8 ChainOffset; /* 0x02 */ 452 U8 Function; /* 0x03 */ 453 U16 QueueTag; /* 0x04 */ 454 U8 Reserved2; /* 0x06 */ 455 U8 MsgFlags; /* 0x07 */ 456 U8 VP_ID; /* 0x08 */ 457 U8 VF_ID; /* 0x09 */ 458 U16 Reserved3; /* 0x0A */ 459 U16 IoIndex; /* 0x0C */ 460 U16 InitiatorConnectionTag; /* 0x0E */ 461 U16 SGLFlags; /* 0x10 */ /* MPI v2.0 only. Reserved on MPI v2.5. */ 462 U16 Reserved4; /* 0x12 */ 463 U8 SGLOffset0; /* 0x14 */ 464 U8 Reserved5; /* 0x15 */ 465 U16 Reserved6; /* 0x16 */ 466 U32 Reserved7; /* 0x18 */ 467 U32 Reserved8; /* 0x1C */ 468 MPI2_SIMPLE_SGE_UNION StatusDataSGE; /* 0x20 */ /* MPI v2.5: This must be an IEEE Simple Element 64. */ 469} MPI2_TARGET_STATUS_SEND_REQUEST, 470 MPI2_POINTER PTR_MPI2_TARGET_STATUS_SEND_REQUEST, 471 Mpi2TargetStatusSendRequest_t, MPI2_POINTER pMpi2TargetStatusSendRequest_t; 472 473/* Target Status Send StatusFlags bits */ 474 475#define MPI2_TSS_FLAGS_REPOST_CMD_BUFFER (0x80) 476#define MPI2_TSS_FLAGS_RETRANSMIT (0x04) 477#define MPI2_TSS_FLAGS_AUTO_GOOD_STATUS (0x01) 478 479/* Target Status Send SGLFlags bits - MPI v2.0 only */ 480/* Data Location Address Space */ 481#define MPI2_TSS_SGLFLAGS_ADDR_MASK (0x0C) 482#define MPI2_TSS_SGLFLAGS_SYSTEM_ADDR (0x00) 483#define MPI2_TSS_SGLFLAGS_IOCDDR_ADDR (0x04) 484#define MPI2_TSS_SGLFLAGS_IOCPLB_ADDR (0x08) 485#define MPI2_TSS_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) 486/* Type */ 487#define MPI2_TSS_SGLFLAGS_TYPE_MASK (0x03) 488#define MPI2_TSS_SGLFLAGS_MPI_TYPE (0x00) 489#define MPI2_TSS_SGLFLAGS_IEEE32_TYPE (0x01) 490#define MPI2_TSS_SGLFLAGS_IEEE64_TYPE (0x02) 491 492/* 493 * NOTE: The SSP status IU is big-endian. When used on a little-endian system, 494 * this structure properly orders the bytes. 495 */ 496typedef struct _MPI2_TARGET_SSP_RSP_IU 497{ 498 U32 Reserved0[6]; /* reserved for SSP header */ /* 0x00 */ 499 500 /* start of RESPONSE information unit */ 501 U32 Reserved1; /* 0x18 */ 502 U32 Reserved2; /* 0x1C */ 503 U16 Reserved3; /* 0x20 */ 504 U8 DataPres; /* lower 2 bits */ /* 0x22 */ 505 U8 Status; /* 0x23 */ 506 U32 Reserved4; /* 0x24 */ 507 U32 SenseDataLength; /* 0x28 */ 508 U32 ResponseDataLength; /* 0x2C */ 509 510 /* start of Response or Sense Data (size may vary dynamically) */ 511 U8 ResponseSenseData[4]; /* 0x30 */ 512} MPI2_TARGET_SSP_RSP_IU, MPI2_POINTER PTR_MPI2_TARGET_SSP_RSP_IU, 513 Mpi2TargetSspRspIu_t, MPI2_POINTER pMpi2TargetSspRspIu_t; 514 515/**************************************************************************** 516* Target Standard Reply - used with Target Assist or Target Status Send 517****************************************************************************/ 518 519typedef struct _MPI2_TARGET_STANDARD_REPLY 520{ 521 U16 Reserved; /* 0x00 */ 522 U8 MsgLength; /* 0x02 */ 523 U8 Function; /* 0x03 */ 524 U16 Reserved1; /* 0x04 */ 525 U8 Reserved2; /* 0x06 */ 526 U8 MsgFlags; /* 0x07 */ 527 U8 VP_ID; /* 0x08 */ 528 U8 VF_ID; /* 0x09 */ 529 U16 Reserved3; /* 0x0A */ 530 U16 Reserved4; /* 0x0C */ 531 U16 IOCStatus; /* 0x0E */ 532 U32 IOCLogInfo; /* 0x10 */ 533 U16 IoIndex; /* 0x14 */ 534 U16 Reserved5; /* 0x16 */ 535 U32 TransferCount; /* 0x18 */ 536 U32 BidirectionalTransferCount; /* 0x1C */ 537} MPI2_TARGET_STANDARD_REPLY, MPI2_POINTER PTR_MPI2_TARGET_STANDARD_REPLY, 538 Mpi2TargetErrorReply_t, MPI2_POINTER pMpi2TargetErrorReply_t; 539 540/**************************************************************************** 541* Target Mode Abort Request 542****************************************************************************/ 543 544typedef struct _MPI2_TARGET_MODE_ABORT_REQUEST 545{ 546 U8 AbortType; /* 0x00 */ 547 U8 Reserved1; /* 0x01 */ 548 U8 ChainOffset; /* 0x02 */ 549 U8 Function; /* 0x03 */ 550 U16 Reserved2; /* 0x04 */ 551 U8 Reserved3; /* 0x06 */ 552 U8 MsgFlags; /* 0x07 */ 553 U8 VP_ID; /* 0x08 */ 554 U8 VF_ID; /* 0x09 */ 555 U16 Reserved4; /* 0x0A */ 556 U16 IoIndexToAbort; /* 0x0C */ 557 U16 InitiatorDevHandle; /* 0x0E */ 558 U32 MidToAbort; /* 0x10 */ 559} MPI2_TARGET_MODE_ABORT, MPI2_POINTER PTR_MPI2_TARGET_MODE_ABORT, 560 Mpi2TargetModeAbort_t, MPI2_POINTER pMpi2TargetModeAbort_t; 561 562/* Target Mode Abort AbortType values */ 563 564#define MPI2_TARGET_MODE_ABORT_ALL_CMD_BUFFERS (0x00) 565#define MPI2_TARGET_MODE_ABORT_ALL_IO (0x01) 566#define MPI2_TARGET_MODE_ABORT_EXACT_IO (0x02) 567#define MPI2_TARGET_MODE_ABORT_EXACT_IO_REQUEST (0x03) 568#define MPI2_TARGET_MODE_ABORT_IO_REQUEST_AND_IO (0x04) 569#define MPI2_TARGET_MODE_ABORT_DEVHANDLE (0x05) 570#define MPI2_TARGET_MODE_ABORT_ALL_COMMANDS (0x06) 571 572/**************************************************************************** 573* Target Mode Abort Reply 574****************************************************************************/ 575 576typedef struct _MPI2_TARGET_MODE_ABORT_REPLY 577{ 578 U16 Reserved; /* 0x00 */ 579 U8 MsgLength; /* 0x02 */ 580 U8 Function; /* 0x03 */ 581 U16 Reserved1; /* 0x04 */ 582 U8 Reserved2; /* 0x06 */ 583 U8 MsgFlags; /* 0x07 */ 584 U8 VP_ID; /* 0x08 */ 585 U8 VF_ID; /* 0x09 */ 586 U16 Reserved3; /* 0x0A */ 587 U16 Reserved4; /* 0x0C */ 588 U16 IOCStatus; /* 0x0E */ 589 U32 IOCLogInfo; /* 0x10 */ 590 U32 AbortCount; /* 0x14 */ 591} MPI2_TARGET_MODE_ABORT_REPLY, MPI2_POINTER PTR_MPI2_TARGET_MODE_ABORT_REPLY, 592 Mpi2TargetModeAbortReply_t, MPI2_POINTER pMpi2TargetModeAbortReply_t; 593 594#endif 595