1/*- 2 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. Neither the name of the author nor the names of any co-contributors 13 * may be used to endorse or promote products derived from this software 14 * without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD 29 * 30 * $FreeBSD$ 31 */ 32 33/* 34 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 35 * 36 * 37 * Name: mpi2_ioc.h 38 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages 39 * Creation Date: October 11, 2006 40 * 41 * mpi2_ioc.h Version: 02.00.36 42 * 43 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 44 * prefix are for use only on MPI v2.5 products, and must not be used 45 * with MPI v2.0 products. Unless otherwise noted, names beginning with 46 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 47 * 48 * Version History 49 * --------------- 50 * 51 * Date Version Description 52 * -------- -------- ------------------------------------------------------ 53 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 54 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to 55 * MaxTargets. 56 * Added TotalImageSize field to FWDownload Request. 57 * Added reserved words to FWUpload Request. 58 * 06-26-07 02.00.02 Added IR Configuration Change List Event. 59 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit 60 * request and replaced it with 61 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. 62 * Replaced the MinReplyQueueDepth field of the IOCFacts 63 * reply with MaxReplyDescriptorPostQueueDepth. 64 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum 65 * depth for the Reply Descriptor Post Queue. 66 * Added SASAddress field to Initiator Device Table 67 * Overflow Event data. 68 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING 69 * for SAS Initiator Device Status Change Event data. 70 * Modified Reason Code defines for SAS Topology Change 71 * List Event data, including adding a bit for PHY Vacant 72 * status, and adding a mask for the Reason Code. 73 * Added define for 74 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. 75 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. 76 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of 77 * the IOCFacts Reply. 78 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 79 * Moved MPI2_VERSION_UNION to mpi2.h. 80 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks 81 * instead of enables, and added SASBroadcastPrimitiveMasks 82 * field. 83 * Added Log Entry Added Event and related structure. 84 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. 85 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. 86 * Added MaxVolumes and MaxPersistentEntries fields to 87 * IOCFacts reply. 88 * Added ProtocalFlags and IOCCapabilities fields to 89 * MPI2_FW_IMAGE_HEADER. 90 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. 91 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to 92 * a U16 (from a U32). 93 * Removed extra 's' from EventMasks name. 94 * 06-27-08 02.00.08 Fixed an offset in a comment. 95 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. 96 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and 97 * renamed MinReplyFrameSize to ReplyFrameSize. 98 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. 99 * Added two new RAIDOperation values for Integrated RAID 100 * Operations Status Event data. 101 * Added four new IR Configuration Change List Event data 102 * ReasonCode values. 103 * Added two new ReasonCode defines for SAS Device Status 104 * Change Event data. 105 * Added three new DiscoveryStatus bits for the SAS 106 * Discovery event data. 107 * Added Multiplexing Status Change bit to the PhyStatus 108 * field of the SAS Topology Change List event data. 109 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. 110 * BootFlags are now product-specific. 111 * Added defines for the indivdual signature bytes 112 * for MPI2_INIT_IMAGE_FOOTER. 113 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. 114 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR 115 * define. 116 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE 117 * define. 118 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. 119 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. 120 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. 121 * Added two new reason codes for SAS Device Status Change 122 * Event. 123 * Added new event: SAS PHY Counter. 124 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. 125 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 126 * Added new product id family for 2208. 127 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. 128 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. 129 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. 130 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. 131 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. 132 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. 133 * Added Host Based Discovery Phy Event data. 134 * Added defines for ProductID Product field 135 * (MPI2_FW_HEADER_PID_). 136 * Modified values for SAS ProductID Family 137 * (MPI2_FW_HEADER_PID_FAMILY_). 138 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. 139 * Added PowerManagementControl Request structures and 140 * defines. 141 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. 142 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. 143 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. 144 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added 145 * SASNotifyPrimitiveMasks field to 146 * MPI2_EVENT_NOTIFICATION_REQUEST. 147 * Added Temperature Threshold Event. 148 * Added Host Message Event. 149 * Added Send Host Message request and reply. 150 * 05-25-11 02.00.18 For Extended Image Header, added 151 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and 152 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. 153 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. 154 * 08-24-11 02.00.19 Added PhysicalPort field to 155 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. 156 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. 157 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. 158 * 03-29-12 02.00.21 Added a product specific range to event values. 159 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. 160 * Added ElapsedSeconds field to 161 * MPI2_EVENT_DATA_IR_OPERATION_STATUS. 162 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE 163 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. 164 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. 165 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. 166 * Added Encrypted Hash Extended Image. 167 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. 168 * 11-18-14 02.00.25 Updated copyright information. 169 * 03-16-15 02.00.26 Updated for MPI v2.6. 170 * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and 171 * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. 172 * Added MPI2_EVENT_PCIE_LINK_COUNTER and 173 * MPI26_EVENT_DATA_PCIE_LINK_COUNTER. 174 * Added MPI26_CTRL_OP_SHUTDOWN. 175 * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG 176 * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and 177 * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. 178 * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. 179 * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. 180 * Added ConigurationFlags field to IOCInit message to 181 * support NVMe SGL format control. 182 * Added PCIe SRIOV support. 183 * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. 184 * Added PCIe 4 16.0 GT/sec speec support. 185 * Removed AHCI support. 186 * Removed SOP support. 187 * 07-01-16 02.00.29 Added Archclass for 4008 product. 188 * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED 189 * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload 190 * Request Message. 191 * Added new defines for the ImageType field of FWUpload 192 * Request Message. 193 * Added new values for the RegionType field in the Layout 194 * Data sections of the FLASH Layout Extended Image Data. 195 * Added new defines for the ReasonCode field of 196 * Active Cable Exception Event. 197 * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and 198 * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. 199 * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and 200 * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. 201 * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. 202 * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related 203 * defines for the ReasonCode field. 204 * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD. 205 * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED 206 * to the ReasonCode field in PCIe Device Status Change 207 * Event Data. 208 * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC. 209 * Moved FW image definitions ionto new mpi2_image,h 210 * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) 211 * -------------------------------------------------------------------------- 212 */ 213 214#ifndef MPI2_IOC_H 215#define MPI2_IOC_H 216 217/***************************************************************************** 218* 219* IOC Messages 220* 221*****************************************************************************/ 222 223/**************************************************************************** 224* IOCInit message 225****************************************************************************/ 226 227/* IOCInit Request message */ 228typedef struct _MPI2_IOC_INIT_REQUEST 229{ 230 U8 WhoInit; /* 0x00 */ 231 U8 Reserved1; /* 0x01 */ 232 U8 ChainOffset; /* 0x02 */ 233 U8 Function; /* 0x03 */ 234 U16 Reserved2; /* 0x04 */ 235 U8 Reserved3; /* 0x06 */ 236 U8 MsgFlags; /* 0x07 */ 237 U8 VP_ID; /* 0x08 */ 238 U8 VF_ID; /* 0x09 */ 239 U16 Reserved4; /* 0x0A */ 240 U16 MsgVersion; /* 0x0C */ 241 U16 HeaderVersion; /* 0x0E */ 242 U32 Reserved5; /* 0x10 */ 243 U16 ConfigurationFlags; /* 0x14 */ 244 U8 HostPageSize; /* 0x16 */ 245 U8 HostMSIxVectors; /* 0x17 */ 246 U16 Reserved8; /* 0x18 */ 247 U16 SystemRequestFrameSize; /* 0x1A */ 248 U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ 249 U16 ReplyFreeQueueDepth; /* 0x1E */ 250 U32 SenseBufferAddressHigh; /* 0x20 */ 251 U32 SystemReplyAddressHigh; /* 0x24 */ 252 U64 SystemRequestFrameBaseAddress; /* 0x28 */ 253 U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ 254 U64 ReplyFreeQueueAddress; /* 0x38 */ 255 U64 TimeStamp; /* 0x40 */ 256} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, 257 Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; 258 259/* WhoInit values */ 260#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) 261#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) 262#define MPI2_WHOINIT_ROM_BIOS (0x02) 263#define MPI2_WHOINIT_PCI_PEER (0x03) 264#define MPI2_WHOINIT_HOST_DRIVER (0x04) 265#define MPI2_WHOINIT_MANUFACTURER (0x05) 266 267/* MsgFlags */ 268#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) 269 270/* MsgVersion */ 271#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) 272#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) 273#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) 274#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) 275 276/* HeaderVersion */ 277#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) 278#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) 279#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) 280#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) 281 282/* ConfigurationFlags */ 283#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) 284 285/* minimum depth for a Reply Descriptor Post Queue */ 286#define MPI2_RDPQ_DEPTH_MIN (16) 287 288/* Reply Descriptor Post Queue Array Entry */ 289typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY 290{ 291 U64 RDPQBaseAddress; /* 0x00 */ 292 U32 Reserved1; /* 0x08 */ 293 U32 Reserved2; /* 0x0C */ 294} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 295 MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 296 Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry; 297 298/* IOCInit Reply message */ 299typedef struct _MPI2_IOC_INIT_REPLY 300{ 301 U8 WhoInit; /* 0x00 */ 302 U8 Reserved1; /* 0x01 */ 303 U8 MsgLength; /* 0x02 */ 304 U8 Function; /* 0x03 */ 305 U16 Reserved2; /* 0x04 */ 306 U8 Reserved3; /* 0x06 */ 307 U8 MsgFlags; /* 0x07 */ 308 U8 VP_ID; /* 0x08 */ 309 U8 VF_ID; /* 0x09 */ 310 U16 Reserved4; /* 0x0A */ 311 U16 Reserved5; /* 0x0C */ 312 U16 IOCStatus; /* 0x0E */ 313 U32 IOCLogInfo; /* 0x10 */ 314} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, 315 Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; 316 317/**************************************************************************** 318* IOCFacts message 319****************************************************************************/ 320 321/* IOCFacts Request message */ 322typedef struct _MPI2_IOC_FACTS_REQUEST 323{ 324 U16 Reserved1; /* 0x00 */ 325 U8 ChainOffset; /* 0x02 */ 326 U8 Function; /* 0x03 */ 327 U16 Reserved2; /* 0x04 */ 328 U8 Reserved3; /* 0x06 */ 329 U8 MsgFlags; /* 0x07 */ 330 U8 VP_ID; /* 0x08 */ 331 U8 VF_ID; /* 0x09 */ 332 U16 Reserved4; /* 0x0A */ 333} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, 334 Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; 335 336/* IOCFacts Reply message */ 337typedef struct _MPI2_IOC_FACTS_REPLY 338{ 339 U16 MsgVersion; /* 0x00 */ 340 U8 MsgLength; /* 0x02 */ 341 U8 Function; /* 0x03 */ 342 U16 HeaderVersion; /* 0x04 */ 343 U8 IOCNumber; /* 0x06 */ 344 U8 MsgFlags; /* 0x07 */ 345 U8 VP_ID; /* 0x08 */ 346 U8 VF_ID; /* 0x09 */ 347 U16 Reserved1; /* 0x0A */ 348 U16 IOCExceptions; /* 0x0C */ 349 U16 IOCStatus; /* 0x0E */ 350 U32 IOCLogInfo; /* 0x10 */ 351 U8 MaxChainDepth; /* 0x14 */ 352 U8 WhoInit; /* 0x15 */ 353 U8 NumberOfPorts; /* 0x16 */ 354 U8 MaxMSIxVectors; /* 0x17 */ 355 U16 RequestCredit; /* 0x18 */ 356 U16 ProductID; /* 0x1A */ 357 U32 IOCCapabilities; /* 0x1C */ 358 MPI2_VERSION_UNION FWVersion; /* 0x20 */ 359 U16 IOCRequestFrameSize; /* 0x24 */ 360 U16 IOCMaxChainSegmentSize; /* 0x26 */ /* MPI 2.5 only; Reserved in MPI 2.0 */ 361 U16 MaxInitiators; /* 0x28 */ 362 U16 MaxTargets; /* 0x2A */ 363 U16 MaxSasExpanders; /* 0x2C */ 364 U16 MaxEnclosures; /* 0x2E */ 365 U16 ProtocolFlags; /* 0x30 */ 366 U16 HighPriorityCredit; /* 0x32 */ 367 U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ 368 U8 ReplyFrameSize; /* 0x36 */ 369 U8 MaxVolumes; /* 0x37 */ 370 U16 MaxDevHandle; /* 0x38 */ 371 U16 MaxPersistentEntries; /* 0x3A */ 372 U16 MinDevHandle; /* 0x3C */ 373 U8 CurrentHostPageSize; /* 0x3E */ 374 U8 Reserved4; /* 0x3F */ 375 U8 SGEModifierMask; /* 0x40 */ 376 U8 SGEModifierValue; /* 0x41 */ 377 U8 SGEModifierShift; /* 0x42 */ 378 U8 Reserved5; /* 0x43 */ 379} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, 380 Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; 381 382/* MsgVersion */ 383#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) 384#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) 385#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) 386#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) 387 388/* HeaderVersion */ 389#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) 390#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) 391#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) 392#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) 393 394/* IOCExceptions */ 395#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) 396#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) 397#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) 398 399#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) 400#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) 401#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) 402#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) 403#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) 404 405#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) 406#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) 407#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) 408#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) 409#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) 410 411/* defines for WhoInit field are after the IOCInit Request */ 412 413/* ProductID field uses MPI2_FW_HEADER_PID_ */ 414 415/* IOCCapabilities */ 416#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) 417#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) 418#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) 419#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) 420#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) 421#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) 422#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) 423#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) 424#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) 425#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) 426#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) 427#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) 428#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) 429#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) 430#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) 431#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) 432#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) 433 434/* ProtocolFlags */ 435#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) /* MPI v2.6 and later */ 436#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) 437#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) 438 439/**************************************************************************** 440* PortFacts message 441****************************************************************************/ 442 443/* PortFacts Request message */ 444typedef struct _MPI2_PORT_FACTS_REQUEST 445{ 446 U16 Reserved1; /* 0x00 */ 447 U8 ChainOffset; /* 0x02 */ 448 U8 Function; /* 0x03 */ 449 U16 Reserved2; /* 0x04 */ 450 U8 PortNumber; /* 0x06 */ 451 U8 MsgFlags; /* 0x07 */ 452 U8 VP_ID; /* 0x08 */ 453 U8 VF_ID; /* 0x09 */ 454 U16 Reserved3; /* 0x0A */ 455} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, 456 Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; 457 458/* PortFacts Reply message */ 459typedef struct _MPI2_PORT_FACTS_REPLY 460{ 461 U16 Reserved1; /* 0x00 */ 462 U8 MsgLength; /* 0x02 */ 463 U8 Function; /* 0x03 */ 464 U16 Reserved2; /* 0x04 */ 465 U8 PortNumber; /* 0x06 */ 466 U8 MsgFlags; /* 0x07 */ 467 U8 VP_ID; /* 0x08 */ 468 U8 VF_ID; /* 0x09 */ 469 U16 Reserved3; /* 0x0A */ 470 U16 Reserved4; /* 0x0C */ 471 U16 IOCStatus; /* 0x0E */ 472 U32 IOCLogInfo; /* 0x10 */ 473 U8 Reserved5; /* 0x14 */ 474 U8 PortType; /* 0x15 */ 475 U16 Reserved6; /* 0x16 */ 476 U16 MaxPostedCmdBuffers; /* 0x18 */ 477 U16 Reserved7; /* 0x1A */ 478} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, 479 Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; 480 481/* PortType values */ 482#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) 483#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) 484#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) 485#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) 486#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) 487#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) /* MPI v2.6 and later */ 488 489/**************************************************************************** 490* PortEnable message 491****************************************************************************/ 492 493/* PortEnable Request message */ 494typedef struct _MPI2_PORT_ENABLE_REQUEST 495{ 496 U16 Reserved1; /* 0x00 */ 497 U8 ChainOffset; /* 0x02 */ 498 U8 Function; /* 0x03 */ 499 U8 Reserved2; /* 0x04 */ 500 U8 PortFlags; /* 0x05 */ 501 U8 Reserved3; /* 0x06 */ 502 U8 MsgFlags; /* 0x07 */ 503 U8 VP_ID; /* 0x08 */ 504 U8 VF_ID; /* 0x09 */ 505 U16 Reserved4; /* 0x0A */ 506} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, 507 Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; 508 509/* PortEnable Reply message */ 510typedef struct _MPI2_PORT_ENABLE_REPLY 511{ 512 U16 Reserved1; /* 0x00 */ 513 U8 MsgLength; /* 0x02 */ 514 U8 Function; /* 0x03 */ 515 U8 Reserved2; /* 0x04 */ 516 U8 PortFlags; /* 0x05 */ 517 U8 Reserved3; /* 0x06 */ 518 U8 MsgFlags; /* 0x07 */ 519 U8 VP_ID; /* 0x08 */ 520 U8 VF_ID; /* 0x09 */ 521 U16 Reserved4; /* 0x0A */ 522 U16 Reserved5; /* 0x0C */ 523 U16 IOCStatus; /* 0x0E */ 524 U32 IOCLogInfo; /* 0x10 */ 525} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, 526 Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; 527 528/**************************************************************************** 529* EventNotification message 530****************************************************************************/ 531 532/* EventNotification Request message */ 533#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) 534 535typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST 536{ 537 U16 Reserved1; /* 0x00 */ 538 U8 ChainOffset; /* 0x02 */ 539 U8 Function; /* 0x03 */ 540 U16 Reserved2; /* 0x04 */ 541 U8 Reserved3; /* 0x06 */ 542 U8 MsgFlags; /* 0x07 */ 543 U8 VP_ID; /* 0x08 */ 544 U8 VF_ID; /* 0x09 */ 545 U16 Reserved4; /* 0x0A */ 546 U32 Reserved5; /* 0x0C */ 547 U32 Reserved6; /* 0x10 */ 548 U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ 549 U16 SASBroadcastPrimitiveMasks; /* 0x24 */ 550 U16 SASNotifyPrimitiveMasks; /* 0x26 */ 551 U32 Reserved8; /* 0x28 */ 552} MPI2_EVENT_NOTIFICATION_REQUEST, 553 MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, 554 Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; 555 556/* EventNotification Reply message */ 557typedef struct _MPI2_EVENT_NOTIFICATION_REPLY 558{ 559 U16 EventDataLength; /* 0x00 */ 560 U8 MsgLength; /* 0x02 */ 561 U8 Function; /* 0x03 */ 562 U16 Reserved1; /* 0x04 */ 563 U8 AckRequired; /* 0x06 */ 564 U8 MsgFlags; /* 0x07 */ 565 U8 VP_ID; /* 0x08 */ 566 U8 VF_ID; /* 0x09 */ 567 U16 Reserved2; /* 0x0A */ 568 U16 Reserved3; /* 0x0C */ 569 U16 IOCStatus; /* 0x0E */ 570 U32 IOCLogInfo; /* 0x10 */ 571 U16 Event; /* 0x14 */ 572 U16 Reserved4; /* 0x16 */ 573 U32 EventContext; /* 0x18 */ 574 U32 EventData[1]; /* 0x1C */ 575} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, 576 Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; 577 578/* AckRequired */ 579#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) 580#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) 581 582/* Event */ 583#define MPI2_EVENT_LOG_DATA (0x0001) 584#define MPI2_EVENT_STATE_CHANGE (0x0002) 585#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) 586#define MPI2_EVENT_EVENT_CHANGE (0x000A) 587#define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */ 588#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) 589#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) 590#define MPI2_EVENT_SAS_DISCOVERY (0x0016) 591#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) 592#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) 593#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) 594#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) 595#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) 596#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) /* MPI v2.6 and later */ 597#define MPI2_EVENT_IR_VOLUME (0x001E) 598#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) 599#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) 600#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) 601#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) 602#define MPI2_EVENT_GPIO_INTERRUPT (0x0023) 603#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) 604#define MPI2_EVENT_SAS_QUIESCE (0x0025) 605#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) 606#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) 607#define MPI2_EVENT_HOST_MESSAGE (0x0028) 608#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) 609#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) /* MPI v2.6 and later */ 610#define MPI2_EVENT_PCIE_ENUMERATION (0x0031) /* MPI v2.6 and later */ 611#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) /* MPI v2.6 and later */ 612#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) /* MPI v2.6 and later */ 613#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) /* MPI v2.6 and later */ 614#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) /* MPI v2.5 and later */ 615#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) 616#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) 617 618/* Log Entry Added Event data */ 619 620/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ 621#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) 622 623typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED 624{ 625 U64 TimeStamp; /* 0x00 */ 626 U32 Reserved1; /* 0x08 */ 627 U16 LogSequence; /* 0x0C */ 628 U16 LogEntryQualifier; /* 0x0E */ 629 U8 VP_ID; /* 0x10 */ 630 U8 VF_ID; /* 0x11 */ 631 U16 Reserved2; /* 0x12 */ 632 U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ 633} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 634 MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 635 Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; 636 637/* GPIO Interrupt Event data */ 638 639typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT 640{ 641 U8 GPIONum; /* 0x00 */ 642 U8 Reserved1; /* 0x01 */ 643 U16 Reserved2; /* 0x02 */ 644} MPI2_EVENT_DATA_GPIO_INTERRUPT, 645 MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, 646 Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; 647 648/* Temperature Threshold Event data */ 649 650typedef struct _MPI2_EVENT_DATA_TEMPERATURE 651{ 652 U16 Status; /* 0x00 */ 653 U8 SensorNum; /* 0x02 */ 654 U8 Reserved1; /* 0x03 */ 655 U16 CurrentTemperature; /* 0x04 */ 656 U16 Reserved2; /* 0x06 */ 657 U32 Reserved3; /* 0x08 */ 658 U32 Reserved4; /* 0x0C */ 659} MPI2_EVENT_DATA_TEMPERATURE, 660 MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE, 661 Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t; 662 663/* Temperature Threshold Event data Status bits */ 664#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) 665#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) 666#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) 667#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) 668 669/* Host Message Event data */ 670 671typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE 672{ 673 U8 SourceVF_ID; /* 0x00 */ 674 U8 Reserved1; /* 0x01 */ 675 U16 Reserved2; /* 0x02 */ 676 U32 Reserved3; /* 0x04 */ 677 U32 HostData[1]; /* 0x08 */ 678} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE, 679 Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; 680 681/* Power Performance Change Event data */ 682 683typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE 684{ 685 U8 CurrentPowerMode; /* 0x00 */ 686 U8 PreviousPowerMode; /* 0x01 */ 687 U16 Reserved1; /* 0x02 */ 688} MPI2_EVENT_DATA_POWER_PERF_CHANGE, 689 MPI2_POINTER PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, 690 Mpi2EventDataPowerPerfChange_t, MPI2_POINTER pMpi2EventDataPowerPerfChange_t; 691 692/* defines for CurrentPowerMode and PreviousPowerMode fields */ 693#define MPI2_EVENT_PM_INIT_MASK (0xC0) 694#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) 695#define MPI2_EVENT_PM_INIT_HOST (0x40) 696#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) 697#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) 698 699#define MPI2_EVENT_PM_MODE_MASK (0x07) 700#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) 701#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) 702#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) 703#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) 704#define MPI2_EVENT_PM_MODE_STANDBY (0x06) 705 706/* Active Cable Exception Event data */ 707 708typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT 709{ 710 U32 ActiveCablePowerRequirement; /* 0x00 */ 711 U8 ReasonCode; /* 0x04 */ 712 U8 ReceptacleID; /* 0x05 */ 713 U16 Reserved1; /* 0x06 */ 714} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 715 MPI2_POINTER PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 716 Mpi25EventDataActiveCableExcept_t, 717 MPI2_POINTER pMpi25EventDataActiveCableExcept_t, 718 MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 719 MPI2_POINTER PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 720 Mpi26EventDataActiveCableExcept_t, 721 MPI2_POINTER pMpi26EventDataActiveCableExcept_t; 722 723/* MPI2.5 defines for the ReasonCode field */ 724#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) 725#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) 726#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) 727 728/* MPI2.6 defines for the ReasonCode field */ 729#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) 730#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) 731#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02) 732 733/* Hard Reset Received Event data */ 734 735typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED 736{ 737 U8 Reserved1; /* 0x00 */ 738 U8 Port; /* 0x01 */ 739 U16 Reserved2; /* 0x02 */ 740} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 741 MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 742 Mpi2EventDataHardResetReceived_t, 743 MPI2_POINTER pMpi2EventDataHardResetReceived_t; 744 745/* Task Set Full Event data */ 746/* this event is obsolete */ 747 748typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL 749{ 750 U16 DevHandle; /* 0x00 */ 751 U16 CurrentDepth; /* 0x02 */ 752} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, 753 Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; 754 755/* SAS Device Status Change Event data */ 756 757typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE 758{ 759 U16 TaskTag; /* 0x00 */ 760 U8 ReasonCode; /* 0x02 */ 761 U8 PhysicalPort; /* 0x03 */ 762 U8 ASC; /* 0x04 */ 763 U8 ASCQ; /* 0x05 */ 764 U16 DevHandle; /* 0x06 */ 765 U32 Reserved2; /* 0x08 */ 766 U64 SASAddress; /* 0x0C */ 767 U8 LUN[8]; /* 0x14 */ 768} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 769 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 770 Mpi2EventDataSasDeviceStatusChange_t, 771 MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; 772 773/* SAS Device Status Change Event data ReasonCode values */ 774#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) 775#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) 776#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 777#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 778#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 779#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 780#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 781#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 782#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 783#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 784#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) 785#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) 786#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) 787 788/* Integrated RAID Operation Status Event data */ 789 790typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS 791{ 792 U16 VolDevHandle; /* 0x00 */ 793 U16 Reserved1; /* 0x02 */ 794 U8 RAIDOperation; /* 0x04 */ 795 U8 PercentComplete; /* 0x05 */ 796 U16 Reserved2; /* 0x06 */ 797 U32 ElapsedSeconds; /* 0x08 */ 798} MPI2_EVENT_DATA_IR_OPERATION_STATUS, 799 MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, 800 Mpi2EventDataIrOperationStatus_t, 801 MPI2_POINTER pMpi2EventDataIrOperationStatus_t; 802 803/* Integrated RAID Operation Status Event data RAIDOperation values */ 804#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) 805#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) 806#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) 807#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) 808#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) 809 810/* Integrated RAID Volume Event data */ 811 812typedef struct _MPI2_EVENT_DATA_IR_VOLUME 813{ 814 U16 VolDevHandle; /* 0x00 */ 815 U8 ReasonCode; /* 0x02 */ 816 U8 Reserved1; /* 0x03 */ 817 U32 NewValue; /* 0x04 */ 818 U32 PreviousValue; /* 0x08 */ 819} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, 820 Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; 821 822/* Integrated RAID Volume Event data ReasonCode values */ 823#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) 824#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) 825#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) 826 827/* Integrated RAID Physical Disk Event data */ 828 829typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK 830{ 831 U16 Reserved1; /* 0x00 */ 832 U8 ReasonCode; /* 0x02 */ 833 U8 PhysDiskNum; /* 0x03 */ 834 U16 PhysDiskDevHandle; /* 0x04 */ 835 U16 Reserved2; /* 0x06 */ 836 U16 Slot; /* 0x08 */ 837 U16 EnclosureHandle; /* 0x0A */ 838 U32 NewValue; /* 0x0C */ 839 U32 PreviousValue; /* 0x10 */ 840} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 841 MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 842 Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; 843 844/* Integrated RAID Physical Disk Event data ReasonCode values */ 845#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) 846#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) 847#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) 848 849/* Integrated RAID Configuration Change List Event data */ 850 851/* 852 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 853 * one and check NumElements at runtime. 854 */ 855#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT 856#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) 857#endif 858 859typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT 860{ 861 U16 ElementFlags; /* 0x00 */ 862 U16 VolDevHandle; /* 0x02 */ 863 U8 ReasonCode; /* 0x04 */ 864 U8 PhysDiskNum; /* 0x05 */ 865 U16 PhysDiskDevHandle; /* 0x06 */ 866} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, 867 Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; 868 869/* IR Configuration Change List Event data ElementFlags values */ 870#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) 871#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) 872#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) 873#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) 874 875/* IR Configuration Change List Event data ReasonCode values */ 876#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) 877#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) 878#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) 879#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) 880#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) 881#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) 882#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) 883#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) 884#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) 885 886typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST 887{ 888 U8 NumElements; /* 0x00 */ 889 U8 Reserved1; /* 0x01 */ 890 U8 Reserved2; /* 0x02 */ 891 U8 ConfigNum; /* 0x03 */ 892 U32 Flags; /* 0x04 */ 893 MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ 894} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 895 MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 896 Mpi2EventDataIrConfigChangeList_t, 897 MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; 898 899/* IR Configuration Change List Event data Flags values */ 900#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) 901 902/* SAS Discovery Event data */ 903 904typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY 905{ 906 U8 Flags; /* 0x00 */ 907 U8 ReasonCode; /* 0x01 */ 908 U8 PhysicalPort; /* 0x02 */ 909 U8 Reserved1; /* 0x03 */ 910 U32 DiscoveryStatus; /* 0x04 */ 911} MPI2_EVENT_DATA_SAS_DISCOVERY, 912 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, 913 Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; 914 915/* SAS Discovery Event data Flags values */ 916#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) 917#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) 918 919/* SAS Discovery Event data ReasonCode values */ 920#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) 921#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) 922 923/* SAS Discovery Event data DiscoveryStatus values */ 924#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 925#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) 926#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) 927#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 928#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) 929#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 930#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 931#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) 932#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 933#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) 934#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) 935#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) 936#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) 937#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) 938#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) 939#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) 940#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) 941#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) 942#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) 943#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) 944 945/* SAS Broadcast Primitive Event data */ 946 947typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE 948{ 949 U8 PhyNum; /* 0x00 */ 950 U8 Port; /* 0x01 */ 951 U8 PortWidth; /* 0x02 */ 952 U8 Primitive; /* 0x03 */ 953} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 954 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 955 Mpi2EventDataSasBroadcastPrimitive_t, 956 MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; 957 958/* defines for the Primitive field */ 959#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) 960#define MPI2_EVENT_PRIMITIVE_SES (0x02) 961#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) 962#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) 963#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) 964#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) 965#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) 966#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) 967 968/* SAS Notify Primitive Event data */ 969 970typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE 971{ 972 U8 PhyNum; /* 0x00 */ 973 U8 Port; /* 0x01 */ 974 U8 Reserved1; /* 0x02 */ 975 U8 Primitive; /* 0x03 */ 976} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 977 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 978 Mpi2EventDataSasNotifyPrimitive_t, 979 MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t; 980 981/* defines for the Primitive field */ 982#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) 983#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) 984#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) 985#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) 986 987/* SAS Initiator Device Status Change Event data */ 988 989typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE 990{ 991 U8 ReasonCode; /* 0x00 */ 992 U8 PhysicalPort; /* 0x01 */ 993 U16 DevHandle; /* 0x02 */ 994 U64 SASAddress; /* 0x04 */ 995} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 996 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 997 Mpi2EventDataSasInitDevStatusChange_t, 998 MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; 999 1000/* SAS Initiator Device Status Change event ReasonCode values */ 1001#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) 1002#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) 1003 1004/* SAS Initiator Device Table Overflow Event data */ 1005 1006typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW 1007{ 1008 U16 MaxInit; /* 0x00 */ 1009 U16 CurrentInit; /* 0x02 */ 1010 U64 SASAddress; /* 0x04 */ 1011} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 1012 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 1013 Mpi2EventDataSasInitTableOverflow_t, 1014 MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; 1015 1016/* SAS Topology Change List Event data */ 1017 1018/* 1019 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1020 * one and check NumEntries at runtime. 1021 */ 1022#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT 1023#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) 1024#endif 1025 1026typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY 1027{ 1028 U16 AttachedDevHandle; /* 0x00 */ 1029 U8 LinkRate; /* 0x02 */ 1030 U8 PhyStatus; /* 0x03 */ 1031} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, 1032 Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; 1033 1034typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST 1035{ 1036 U16 EnclosureHandle; /* 0x00 */ 1037 U16 ExpanderDevHandle; /* 0x02 */ 1038 U8 NumPhys; /* 0x04 */ 1039 U8 Reserved1; /* 0x05 */ 1040 U16 Reserved2; /* 0x06 */ 1041 U8 NumEntries; /* 0x08 */ 1042 U8 StartPhyNum; /* 0x09 */ 1043 U8 ExpStatus; /* 0x0A */ 1044 U8 PhysicalPort; /* 0x0B */ 1045 MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ 1046} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 1047 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 1048 Mpi2EventDataSasTopologyChangeList_t, 1049 MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; 1050 1051/* values for the ExpStatus field */ 1052#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) 1053#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) 1054#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) 1055#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) 1056#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) 1057 1058/* defines for the LinkRate field */ 1059#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) 1060#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) 1061#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) 1062#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) 1063 1064#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) 1065#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) 1066#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) 1067#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) 1068#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) 1069#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) 1070#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) 1071#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) 1072#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) 1073#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) 1074#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) 1075#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) 1076 1077/* values for the PhyStatus field */ 1078#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) 1079#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) 1080/* values for the PhyStatus ReasonCode sub-field */ 1081#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) 1082#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) 1083#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) 1084#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) 1085#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) 1086#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) 1087 1088/* SAS Enclosure Device Status Change Event data */ 1089 1090typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE 1091{ 1092 U16 EnclosureHandle; /* 0x00 */ 1093 U8 ReasonCode; /* 0x02 */ 1094 U8 PhysicalPort; /* 0x03 */ 1095 U64 EnclosureLogicalID; /* 0x04 */ 1096 U16 NumSlots; /* 0x0C */ 1097 U16 StartSlot; /* 0x0E */ 1098 U32 PhyBits; /* 0x10 */ 1099} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1100 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1101 Mpi2EventDataSasEnclDevStatusChange_t, 1102 MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t, 1103 MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, 1104 MPI2_POINTER PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, 1105 Mpi26EventDataEnclDevStatusChange_t, 1106 MPI2_POINTER pMpi26EventDataEnclDevStatusChange_t; 1107 1108/* SAS Enclosure Device Status Change event ReasonCode values */ 1109#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) 1110#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) 1111 1112/* Enclosure Device Status Change event ReasonCode values */ 1113#define MPI26_EVENT_ENCL_RC_ADDED (0x01) 1114#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) 1115 1116/* SAS PHY Counter Event data */ 1117 1118typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER 1119{ 1120 U64 TimeStamp; /* 0x00 */ 1121 U32 Reserved1; /* 0x08 */ 1122 U8 PhyEventCode; /* 0x0C */ 1123 U8 PhyNum; /* 0x0D */ 1124 U16 Reserved2; /* 0x0E */ 1125 U32 PhyEventInfo; /* 0x10 */ 1126 U8 CounterType; /* 0x14 */ 1127 U8 ThresholdWindow; /* 0x15 */ 1128 U8 TimeUnits; /* 0x16 */ 1129 U8 Reserved3; /* 0x17 */ 1130 U32 EventThreshold; /* 0x18 */ 1131 U16 ThresholdFlags; /* 0x1C */ 1132 U16 Reserved4; /* 0x1E */ 1133} MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1134 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1135 Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t; 1136 1137/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the PhyEventCode field */ 1138 1139/* use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */ 1140 1141/* use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */ 1142 1143/* use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */ 1144 1145/* SAS Quiesce Event data */ 1146 1147typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE 1148{ 1149 U8 ReasonCode; /* 0x00 */ 1150 U8 Reserved1; /* 0x01 */ 1151 U16 Reserved2; /* 0x02 */ 1152 U32 Reserved3; /* 0x04 */ 1153} MPI2_EVENT_DATA_SAS_QUIESCE, 1154 MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE, 1155 Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t; 1156 1157/* SAS Quiesce Event data ReasonCode values */ 1158#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) 1159#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) 1160 1161typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR 1162{ 1163 U16 DevHandle; /* 0x00 */ 1164 U8 ReasonCode; /* 0x02 */ 1165 U8 PhysicalPort; /* 0x03 */ 1166 U32 Reserved1[2]; /* 0x04 */ 1167 U64 SASAddress; /* 0x0C */ 1168 U32 Reserved2[2]; /* 0x14 */ 1169} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, 1170 MPI2_POINTER PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, 1171 Mpi25EventDataSasDeviceDiscoveryError_t, 1172 MPI2_POINTER pMpi25EventDataSasDeviceDiscoveryError_t; 1173 1174/* SAS Device Discovery Error Event data ReasonCode values */ 1175#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) 1176#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) 1177 1178/* Host Based Discovery Phy Event data */ 1179 1180typedef struct _MPI2_EVENT_HBD_PHY_SAS 1181{ 1182 U8 Flags; /* 0x00 */ 1183 U8 NegotiatedLinkRate; /* 0x01 */ 1184 U8 PhyNum; /* 0x02 */ 1185 U8 PhysicalPort; /* 0x03 */ 1186 U32 Reserved1; /* 0x04 */ 1187 U8 InitialFrame[28]; /* 0x08 */ 1188} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS, 1189 Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t; 1190 1191/* values for the Flags field */ 1192#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) 1193#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) 1194 1195/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for the NegotiatedLinkRate field */ 1196 1197typedef union _MPI2_EVENT_HBD_DESCRIPTOR 1198{ 1199 MPI2_EVENT_HBD_PHY_SAS Sas; 1200} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR, 1201 Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t; 1202 1203typedef struct _MPI2_EVENT_DATA_HBD_PHY 1204{ 1205 U8 DescriptorType; /* 0x00 */ 1206 U8 Reserved1; /* 0x01 */ 1207 U16 Reserved2; /* 0x02 */ 1208 U32 Reserved3; /* 0x04 */ 1209 MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */ 1210} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY, 1211 Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t; 1212 1213/* values for the DescriptorType field */ 1214#define MPI2_EVENT_HBD_DT_SAS (0x01) 1215 1216/* PCIe Device Status Change Event data (MPI v2.6 and later) */ 1217 1218typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE 1219{ 1220 U16 TaskTag; /* 0x00 */ 1221 U8 ReasonCode; /* 0x02 */ 1222 U8 PhysicalPort; /* 0x03 */ 1223 U8 ASC; /* 0x04 */ 1224 U8 ASCQ; /* 0x05 */ 1225 U16 DevHandle; /* 0x06 */ 1226 U32 Reserved2; /* 0x08 */ 1227 U64 WWID; /* 0x0C */ 1228 U8 LUN[8]; /* 0x14 */ 1229} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, 1230 MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, 1231 Mpi26EventDataPCIeDeviceStatusChange_t, 1232 MPI2_POINTER pMpi26EventDataPCIeDeviceStatusChange_t; 1233 1234/* PCIe Device Status Change Event data ReasonCode values */ 1235#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) 1236#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) 1237#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 1238#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 1239#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 1240#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 1241#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 1242#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 1243#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 1244#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 1245#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) 1246#define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11) 1247 1248/* PCIe Enumeration Event data (MPI v2.6 and later) */ 1249 1250typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION 1251{ 1252 U8 Flags; /* 0x00 */ 1253 U8 ReasonCode; /* 0x01 */ 1254 U8 PhysicalPort; /* 0x02 */ 1255 U8 Reserved1; /* 0x03 */ 1256 U32 EnumerationStatus; /* 0x04 */ 1257} MPI26_EVENT_DATA_PCIE_ENUMERATION, 1258 MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, 1259 Mpi26EventDataPCIeEnumeration_t, 1260 MPI2_POINTER pMpi26EventDataPCIeEnumeration_t; 1261 1262/* PCIe Enumeration Event data Flags values */ 1263#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) 1264#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) 1265 1266/* PCIe Enumeration Event data ReasonCode values */ 1267#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) 1268#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) 1269 1270/* PCIe Enumeration Event data EnumerationStatus values */ 1271#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) 1272#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) 1273#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) 1274 1275/* PCIe Topology Change List Event data (MPI v2.6 and later) */ 1276 1277/* 1278 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1279 * one and check NumEntries at runtime. 1280 */ 1281#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT 1282#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) 1283#endif 1284 1285typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY 1286{ 1287 U16 AttachedDevHandle; /* 0x00 */ 1288 U8 PortStatus; /* 0x02 */ 1289 U8 Reserved1; /* 0x03 */ 1290 U8 CurrentPortInfo; /* 0x04 */ 1291 U8 Reserved2; /* 0x05 */ 1292 U8 PreviousPortInfo; /* 0x06 */ 1293 U8 Reserved3; /* 0x07 */ 1294} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, 1295 MPI2_POINTER PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, 1296 Mpi26EventPCIeTopoPortEntry_t, 1297 MPI2_POINTER pMpi26EventPCIeTopoPortEntry_t; 1298 1299/* PCIe Topology Change List Event data PortStatus values */ 1300#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) 1301#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) 1302#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) 1303#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) 1304#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) 1305 1306/* PCIe Topology Change List Event data defines for CurrentPortInfo and PreviousPortInfo */ 1307#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) 1308#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) 1309#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) 1310#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) 1311#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) 1312#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) 1313 1314#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) 1315#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) 1316#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) 1317#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) 1318#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) 1319#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) 1320#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) 1321 1322typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST 1323{ 1324 U16 EnclosureHandle; /* 0x00 */ 1325 U16 SwitchDevHandle; /* 0x02 */ 1326 U8 NumPorts; /* 0x04 */ 1327 U8 Reserved1; /* 0x05 */ 1328 U16 Reserved2; /* 0x06 */ 1329 U8 NumEntries; /* 0x08 */ 1330 U8 StartPortNum; /* 0x09 */ 1331 U8 SwitchStatus; /* 0x0A */ 1332 U8 PhysicalPort; /* 0x0B */ 1333 MPI26_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x0C */ 1334} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, 1335 MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, 1336 Mpi26EventDataPCIeTopologyChangeList_t, 1337 MPI2_POINTER pMpi26EventDataPCIeTopologyChangeList_t; 1338 1339/* PCIe Topology Change List Event data SwitchStatus values */ 1340#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) 1341#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) 1342#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) 1343#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) 1344#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) 1345 1346/* PCIe Link Counter Event data (MPI v2.6 and later) */ 1347 1348typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER 1349{ 1350 U64 TimeStamp; /* 0x00 */ 1351 U32 Reserved1; /* 0x08 */ 1352 U8 LinkEventCode; /* 0x0C */ 1353 U8 LinkNum; /* 0x0D */ 1354 U16 Reserved2; /* 0x0E */ 1355 U32 LinkEventInfo; /* 0x10 */ 1356 U8 CounterType; /* 0x14 */ 1357 U8 ThresholdWindow; /* 0x15 */ 1358 U8 TimeUnits; /* 0x16 */ 1359 U8 Reserved3; /* 0x17 */ 1360 U32 EventThreshold; /* 0x18 */ 1361 U16 ThresholdFlags; /* 0x1C */ 1362 U16 Reserved4; /* 0x1E */ 1363} MPI26_EVENT_DATA_PCIE_LINK_COUNTER, 1364 MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, 1365 Mpi26EventDataPcieLinkCounter_t, MPI2_POINTER pMpi26EventDataPcieLinkCounter_t; 1366 1367/* use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode field */ 1368 1369/* use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */ 1370 1371/* use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */ 1372 1373/* use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */ 1374 1375/**************************************************************************** 1376* EventAck message 1377****************************************************************************/ 1378 1379/* EventAck Request message */ 1380typedef struct _MPI2_EVENT_ACK_REQUEST 1381{ 1382 U16 Reserved1; /* 0x00 */ 1383 U8 ChainOffset; /* 0x02 */ 1384 U8 Function; /* 0x03 */ 1385 U16 Reserved2; /* 0x04 */ 1386 U8 Reserved3; /* 0x06 */ 1387 U8 MsgFlags; /* 0x07 */ 1388 U8 VP_ID; /* 0x08 */ 1389 U8 VF_ID; /* 0x09 */ 1390 U16 Reserved4; /* 0x0A */ 1391 U16 Event; /* 0x0C */ 1392 U16 Reserved5; /* 0x0E */ 1393 U32 EventContext; /* 0x10 */ 1394} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, 1395 Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; 1396 1397/* EventAck Reply message */ 1398typedef struct _MPI2_EVENT_ACK_REPLY 1399{ 1400 U16 Reserved1; /* 0x00 */ 1401 U8 MsgLength; /* 0x02 */ 1402 U8 Function; /* 0x03 */ 1403 U16 Reserved2; /* 0x04 */ 1404 U8 Reserved3; /* 0x06 */ 1405 U8 MsgFlags; /* 0x07 */ 1406 U8 VP_ID; /* 0x08 */ 1407 U8 VF_ID; /* 0x09 */ 1408 U16 Reserved4; /* 0x0A */ 1409 U16 Reserved5; /* 0x0C */ 1410 U16 IOCStatus; /* 0x0E */ 1411 U32 IOCLogInfo; /* 0x10 */ 1412} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, 1413 Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; 1414 1415/**************************************************************************** 1416* SendHostMessage message 1417****************************************************************************/ 1418 1419/* SendHostMessage Request message */ 1420typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST 1421{ 1422 U16 HostDataLength; /* 0x00 */ 1423 U8 ChainOffset; /* 0x02 */ 1424 U8 Function; /* 0x03 */ 1425 U16 Reserved1; /* 0x04 */ 1426 U8 Reserved2; /* 0x06 */ 1427 U8 MsgFlags; /* 0x07 */ 1428 U8 VP_ID; /* 0x08 */ 1429 U8 VF_ID; /* 0x09 */ 1430 U16 Reserved3; /* 0x0A */ 1431 U8 Reserved4; /* 0x0C */ 1432 U8 DestVF_ID; /* 0x0D */ 1433 U16 Reserved5; /* 0x0E */ 1434 U32 Reserved6; /* 0x10 */ 1435 U32 Reserved7; /* 0x14 */ 1436 U32 Reserved8; /* 0x18 */ 1437 U32 Reserved9; /* 0x1C */ 1438 U32 Reserved10; /* 0x20 */ 1439 U32 HostData[1]; /* 0x24 */ 1440} MPI2_SEND_HOST_MESSAGE_REQUEST, 1441 MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, 1442 Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t; 1443 1444/* SendHostMessage Reply message */ 1445typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY 1446{ 1447 U16 HostDataLength; /* 0x00 */ 1448 U8 MsgLength; /* 0x02 */ 1449 U8 Function; /* 0x03 */ 1450 U16 Reserved1; /* 0x04 */ 1451 U8 Reserved2; /* 0x06 */ 1452 U8 MsgFlags; /* 0x07 */ 1453 U8 VP_ID; /* 0x08 */ 1454 U8 VF_ID; /* 0x09 */ 1455 U16 Reserved3; /* 0x0A */ 1456 U16 Reserved4; /* 0x0C */ 1457 U16 IOCStatus; /* 0x0E */ 1458 U32 IOCLogInfo; /* 0x10 */ 1459} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY, 1460 Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t; 1461 1462/**************************************************************************** 1463* FWDownload message 1464****************************************************************************/ 1465 1466/* MPI v2.0 FWDownload Request message */ 1467typedef struct _MPI2_FW_DOWNLOAD_REQUEST 1468{ 1469 U8 ImageType; /* 0x00 */ 1470 U8 Reserved1; /* 0x01 */ 1471 U8 ChainOffset; /* 0x02 */ 1472 U8 Function; /* 0x03 */ 1473 U16 Reserved2; /* 0x04 */ 1474 U8 Reserved3; /* 0x06 */ 1475 U8 MsgFlags; /* 0x07 */ 1476 U8 VP_ID; /* 0x08 */ 1477 U8 VF_ID; /* 0x09 */ 1478 U16 Reserved4; /* 0x0A */ 1479 U32 TotalImageSize; /* 0x0C */ 1480 U32 Reserved5; /* 0x10 */ 1481 MPI2_MPI_SGE_UNION SGL; /* 0x14 */ 1482} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, 1483 Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; 1484 1485#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) 1486 1487#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) 1488#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) 1489#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) 1490#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) 1491#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) 1492#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) 1493#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) 1494#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1495#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) /* MPI v2.5 and newer */ 1496#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) 1497#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) 1498#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) 1499#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) 1500#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) 1501#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) 1502#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) 1503#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) 1504#define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15) /* MPI v2.6 and newer */ 1505#define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) /* MPI v2.6 and newer */ 1506#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) 1507#define MPI2_FW_DOWNLOAD_ITYPE_TERMINATE (0xFF) /* MPI v2.6 and newer */ 1508 1509/* MPI v2.0 FWDownload TransactionContext Element */ 1510typedef struct _MPI2_FW_DOWNLOAD_TCSGE 1511{ 1512 U8 Reserved1; /* 0x00 */ 1513 U8 ContextSize; /* 0x01 */ 1514 U8 DetailsLength; /* 0x02 */ 1515 U8 Flags; /* 0x03 */ 1516 U32 Reserved2; /* 0x04 */ 1517 U32 ImageOffset; /* 0x08 */ 1518 U32 ImageSize; /* 0x0C */ 1519} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, 1520 Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; 1521 1522/* MPI v2.5 FWDownload Request message */ 1523typedef struct _MPI25_FW_DOWNLOAD_REQUEST 1524{ 1525 U8 ImageType; /* 0x00 */ 1526 U8 Reserved1; /* 0x01 */ 1527 U8 ChainOffset; /* 0x02 */ 1528 U8 Function; /* 0x03 */ 1529 U16 Reserved2; /* 0x04 */ 1530 U8 Reserved3; /* 0x06 */ 1531 U8 MsgFlags; /* 0x07 */ 1532 U8 VP_ID; /* 0x08 */ 1533 U8 VF_ID; /* 0x09 */ 1534 U16 Reserved4; /* 0x0A */ 1535 U32 TotalImageSize; /* 0x0C */ 1536 U32 Reserved5; /* 0x10 */ 1537 U32 Reserved6; /* 0x14 */ 1538 U32 ImageOffset; /* 0x18 */ 1539 U32 ImageSize; /* 0x1C */ 1540 MPI25_SGE_IO_UNION SGL; /* 0x20 */ 1541} MPI25_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_DOWNLOAD_REQUEST, 1542 Mpi25FWDownloadRequest, MPI2_POINTER pMpi25FWDownloadRequest; 1543 1544/* FWDownload Reply message */ 1545typedef struct _MPI2_FW_DOWNLOAD_REPLY 1546{ 1547 U8 ImageType; /* 0x00 */ 1548 U8 Reserved1; /* 0x01 */ 1549 U8 MsgLength; /* 0x02 */ 1550 U8 Function; /* 0x03 */ 1551 U16 Reserved2; /* 0x04 */ 1552 U8 Reserved3; /* 0x06 */ 1553 U8 MsgFlags; /* 0x07 */ 1554 U8 VP_ID; /* 0x08 */ 1555 U8 VF_ID; /* 0x09 */ 1556 U16 Reserved4; /* 0x0A */ 1557 U16 Reserved5; /* 0x0C */ 1558 U16 IOCStatus; /* 0x0E */ 1559 U32 IOCLogInfo; /* 0x10 */ 1560} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, 1561 Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; 1562 1563/**************************************************************************** 1564* FWUpload message 1565****************************************************************************/ 1566 1567/* MPI v2.0 FWUpload Request message */ 1568typedef struct _MPI2_FW_UPLOAD_REQUEST 1569{ 1570 U8 ImageType; /* 0x00 */ 1571 U8 Reserved1; /* 0x01 */ 1572 U8 ChainOffset; /* 0x02 */ 1573 U8 Function; /* 0x03 */ 1574 U16 Reserved2; /* 0x04 */ 1575 U8 Reserved3; /* 0x06 */ 1576 U8 MsgFlags; /* 0x07 */ 1577 U8 VP_ID; /* 0x08 */ 1578 U8 VF_ID; /* 0x09 */ 1579 U16 Reserved4; /* 0x0A */ 1580 U32 Reserved5; /* 0x0C */ 1581 U32 Reserved6; /* 0x10 */ 1582 MPI2_MPI_SGE_UNION SGL; /* 0x14 */ 1583} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, 1584 Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; 1585 1586#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) 1587#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) 1588#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) 1589#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) 1590#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) 1591#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) 1592#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) 1593#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) 1594#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) 1595#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1596#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) 1597#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) 1598#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) 1599#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) 1600#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) 1601#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) 1602#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) 1603#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) 1604 1605/* MPI v2.0 FWUpload TransactionContext Element */ 1606typedef struct _MPI2_FW_UPLOAD_TCSGE 1607{ 1608 U8 Reserved1; /* 0x00 */ 1609 U8 ContextSize; /* 0x01 */ 1610 U8 DetailsLength; /* 0x02 */ 1611 U8 Flags; /* 0x03 */ 1612 U32 Reserved2; /* 0x04 */ 1613 U32 ImageOffset; /* 0x08 */ 1614 U32 ImageSize; /* 0x0C */ 1615} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, 1616 Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; 1617 1618/* MPI v2.5 FWUpload Request message */ 1619typedef struct _MPI25_FW_UPLOAD_REQUEST 1620{ 1621 U8 ImageType; /* 0x00 */ 1622 U8 Reserved1; /* 0x01 */ 1623 U8 ChainOffset; /* 0x02 */ 1624 U8 Function; /* 0x03 */ 1625 U16 Reserved2; /* 0x04 */ 1626 U8 Reserved3; /* 0x06 */ 1627 U8 MsgFlags; /* 0x07 */ 1628 U8 VP_ID; /* 0x08 */ 1629 U8 VF_ID; /* 0x09 */ 1630 U16 Reserved4; /* 0x0A */ 1631 U32 Reserved5; /* 0x0C */ 1632 U32 Reserved6; /* 0x10 */ 1633 U32 Reserved7; /* 0x14 */ 1634 U32 ImageOffset; /* 0x18 */ 1635 U32 ImageSize; /* 0x1C */ 1636 MPI25_SGE_IO_UNION SGL; /* 0x20 */ 1637} MPI25_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_UPLOAD_REQUEST, 1638 Mpi25FWUploadRequest_t, MPI2_POINTER pMpi25FWUploadRequest_t; 1639 1640/* FWUpload Reply message */ 1641typedef struct _MPI2_FW_UPLOAD_REPLY 1642{ 1643 U8 ImageType; /* 0x00 */ 1644 U8 Reserved1; /* 0x01 */ 1645 U8 MsgLength; /* 0x02 */ 1646 U8 Function; /* 0x03 */ 1647 U16 Reserved2; /* 0x04 */ 1648 U8 Reserved3; /* 0x06 */ 1649 U8 MsgFlags; /* 0x07 */ 1650 U8 VP_ID; /* 0x08 */ 1651 U8 VF_ID; /* 0x09 */ 1652 U16 Reserved4; /* 0x0A */ 1653 U16 Reserved5; /* 0x0C */ 1654 U16 IOCStatus; /* 0x0E */ 1655 U32 IOCLogInfo; /* 0x10 */ 1656 U32 ActualImageSize; /* 0x14 */ 1657} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, 1658 Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; 1659 1660/**************************************************************************** 1661* PowerManagementControl message 1662****************************************************************************/ 1663 1664/* PowerManagementControl Request message */ 1665typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST 1666{ 1667 U8 Feature; /* 0x00 */ 1668 U8 Reserved1; /* 0x01 */ 1669 U8 ChainOffset; /* 0x02 */ 1670 U8 Function; /* 0x03 */ 1671 U16 Reserved2; /* 0x04 */ 1672 U8 Reserved3; /* 0x06 */ 1673 U8 MsgFlags; /* 0x07 */ 1674 U8 VP_ID; /* 0x08 */ 1675 U8 VF_ID; /* 0x09 */ 1676 U16 Reserved4; /* 0x0A */ 1677 U8 Parameter1; /* 0x0C */ 1678 U8 Parameter2; /* 0x0D */ 1679 U8 Parameter3; /* 0x0E */ 1680 U8 Parameter4; /* 0x0F */ 1681 U32 Reserved5; /* 0x10 */ 1682 U32 Reserved6; /* 0x14 */ 1683} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, 1684 Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t; 1685 1686/* defines for the Feature field */ 1687#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) 1688#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) 1689#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */ 1690#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) 1691#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) /* reserved in MPI 2.0 */ 1692#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) 1693#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) 1694 1695/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ 1696/* Parameter1 contains a PHY number */ 1697/* Parameter2 indicates power condition action using these defines */ 1698#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) 1699#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) 1700#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) 1701/* Parameter3 and Parameter4 are reserved */ 1702 1703/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION Feature */ 1704/* Parameter1 contains SAS port width modulation group number */ 1705/* Parameter2 indicates IOC action using these defines */ 1706#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) 1707#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) 1708#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) 1709/* Parameter3 indicates desired modulation level using these defines */ 1710#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) 1711#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) 1712#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) 1713#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) 1714/* Parameter4 is reserved */ 1715 1716/* this next set (_PCIE_LINK) is obsolete */ 1717/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ 1718/* Parameter1 indicates desired PCIe link speed using these defines */ 1719#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */ 1720#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */ 1721#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */ 1722/* Parameter2 indicates desired PCIe link width using these defines */ 1723#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */ 1724#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */ 1725#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */ 1726#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */ 1727/* Parameter3 and Parameter4 are reserved */ 1728 1729/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ 1730/* Parameter1 indicates desired IOC hardware clock speed using these defines */ 1731#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) 1732#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) 1733#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) 1734#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) 1735/* Parameter2, Parameter3, and Parameter4 are reserved */ 1736 1737/* parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature */ 1738/* Parameter1 indicates host action regarding global power management mode */ 1739#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) 1740#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) 1741#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) 1742/* Parameter2 indicates the requested global power management mode */ 1743#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) 1744#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) 1745#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) 1746/* Parameter3 and Parameter4 are reserved */ 1747 1748/* PowerManagementControl Reply message */ 1749typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY 1750{ 1751 U8 Feature; /* 0x00 */ 1752 U8 Reserved1; /* 0x01 */ 1753 U8 MsgLength; /* 0x02 */ 1754 U8 Function; /* 0x03 */ 1755 U16 Reserved2; /* 0x04 */ 1756 U8 Reserved3; /* 0x06 */ 1757 U8 MsgFlags; /* 0x07 */ 1758 U8 VP_ID; /* 0x08 */ 1759 U8 VF_ID; /* 0x09 */ 1760 U16 Reserved4; /* 0x0A */ 1761 U16 Reserved5; /* 0x0C */ 1762 U16 IOCStatus; /* 0x0E */ 1763 U32 IOCLogInfo; /* 0x10 */ 1764} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY, 1765 Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; 1766 1767/**************************************************************************** 1768* IO Unit Control messages (MPI v2.6 and later only.) 1769****************************************************************************/ 1770 1771/* IO Unit Control Request Message */ 1772typedef struct _MPI26_IOUNIT_CONTROL_REQUEST 1773{ 1774 U8 Operation; /* 0x00 */ 1775 U8 Reserved1; /* 0x01 */ 1776 U8 ChainOffset; /* 0x02 */ 1777 U8 Function; /* 0x03 */ 1778 U16 DevHandle; /* 0x04 */ 1779 U8 IOCParameter; /* 0x06 */ 1780 U8 MsgFlags; /* 0x07 */ 1781 U8 VP_ID; /* 0x08 */ 1782 U8 VF_ID; /* 0x09 */ 1783 U16 Reserved3; /* 0x0A */ 1784 U16 Reserved4; /* 0x0C */ 1785 U8 PhyNum; /* 0x0E */ 1786 U8 PrimFlags; /* 0x0F */ 1787 U32 Primitive; /* 0x10 */ 1788 U8 LookupMethod; /* 0x14 */ 1789 U8 Reserved5; /* 0x15 */ 1790 U16 SlotNumber; /* 0x16 */ 1791 U64 LookupAddress; /* 0x18 */ 1792 U32 IOCParameterValue; /* 0x20 */ 1793 U32 Reserved7; /* 0x24 */ 1794 U32 Reserved8; /* 0x28 */ 1795} MPI26_IOUNIT_CONTROL_REQUEST, 1796 MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REQUEST, 1797 Mpi26IoUnitControlRequest_t, MPI2_POINTER pMpi26IoUnitControlRequest_t; 1798 1799/* values for the Operation field */ 1800#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) 1801#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) 1802#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) 1803#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) 1804#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) 1805#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) 1806#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) 1807#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) 1808#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) 1809#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) 1810#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) 1811#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) 1812#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) 1813#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) 1814#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) 1815#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) 1816#define MPI26_CTRL_OP_SHUTDOWN (0x16) 1817#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) 1818#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) 1819#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) 1820#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) 1821#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) 1822#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) 1823 1824/* values for the PrimFlags field */ 1825#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) 1826#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) 1827#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) 1828 1829/* values for the LookupMethod field */ 1830#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) 1831#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) 1832#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) 1833 1834/* IO Unit Control Reply Message */ 1835typedef struct _MPI26_IOUNIT_CONTROL_REPLY 1836{ 1837 U8 Operation; /* 0x00 */ 1838 U8 Reserved1; /* 0x01 */ 1839 U8 MsgLength; /* 0x02 */ 1840 U8 Function; /* 0x03 */ 1841 U16 DevHandle; /* 0x04 */ 1842 U8 IOCParameter; /* 0x06 */ 1843 U8 MsgFlags; /* 0x07 */ 1844 U8 VP_ID; /* 0x08 */ 1845 U8 VF_ID; /* 0x09 */ 1846 U16 Reserved3; /* 0x0A */ 1847 U16 Reserved4; /* 0x0C */ 1848 U16 IOCStatus; /* 0x0E */ 1849 U32 IOCLogInfo; /* 0x10 */ 1850} MPI26_IOUNIT_CONTROL_REPLY, MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REPLY, 1851 Mpi26IoUnitControlReply_t, MPI2_POINTER pMpi26IoUnitControlReply_t; 1852 1853#endif 1854