1/*	$NetBSD: nsphyter.c,v 1.28 2008/01/20 07:58:19 msaitoh Exp $	*/
2
3/*-
4 * SPDX-License-Identifier: BSD-2-Clause-NetBSD AND BSD-2-Clause
5 *
6 * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
7 * All rights reserved.
8 *
9 * This code is derived from software contributed to The NetBSD Foundation
10 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
11 * NASA Ames Research Center.
12 *
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions
15 * are met:
16 * 1. Redistributions of source code must retain the above copyright
17 *    notice, this list of conditions and the following disclaimer.
18 * 2. Redistributions in binary form must reproduce the above copyright
19 *    notice, this list of conditions and the following disclaimer in the
20 *    documentation and/or other materials provided with the distribution.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
24 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
25 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32 * POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/*-
36 * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
37 *
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 *    notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 *    notice, this list of conditions and the following disclaimer in the
45 *    documentation and/or other materials provided with the distribution.
46 *
47 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
48 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
49 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
50 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
51 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
52 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
53 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
54 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
55 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
56 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57 */
58
59#include <sys/cdefs.h>
60__FBSDID("$FreeBSD$");
61
62/*
63 * Driver for the National Semiconductor's DP83843, DP83847 and DP83849
64 * `PHYTER' Ethernet 10/100 PHYs
65 * Data Sheets are available from http://www.national.com
66 *
67 * We also support the DP83815 `MacPHYTER' internal PHY since, for our
68 * purposes, they are compatible.
69 */
70
71#include <sys/param.h>
72#include <sys/systm.h>
73#include <sys/bus.h>
74#include <sys/errno.h>
75#include <sys/kernel.h>
76#include <sys/module.h>
77#include <sys/socket.h>
78
79#include <net/if.h>
80#include <net/if_media.h>
81
82#include <dev/mii/mii.h>
83#include <dev/mii/miivar.h>
84#include "miidevs.h"
85
86#include <dev/mii/nsphyterreg.h>
87
88#include "miibus_if.h"
89
90static device_probe_t	nsphyter_probe;
91static device_attach_t	nsphyter_attach;
92
93static device_method_t nsphyter_methods[] = {
94	/* device interface */
95	DEVMETHOD(device_probe,		nsphyter_probe),
96	DEVMETHOD(device_attach,	nsphyter_attach),
97	DEVMETHOD(device_detach,	mii_phy_detach),
98	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
99	DEVMETHOD_END
100};
101
102static devclass_t nsphyter_devclass;
103
104static driver_t nsphyter_driver = {
105	"nsphyter",
106	nsphyter_methods,
107	sizeof(struct mii_softc)
108};
109
110DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, nsphyter_devclass, 0, 0);
111
112static int	nsphyter_service(struct mii_softc *, struct mii_data *, int);
113static void	nsphyter_status(struct mii_softc *);
114static void	nsphyter_reset(struct mii_softc *);
115
116static const struct mii_phydesc nsphyters[] = {
117	MII_PHY_DESC(xxNATSEMI, DP83815),
118	MII_PHY_DESC(xxNATSEMI, DP83843),
119	MII_PHY_DESC(xxNATSEMI, DP83847),
120	MII_PHY_DESC(xxNATSEMI, DP83849),
121	MII_PHY_END
122};
123
124static const struct mii_phy_funcs nsphyter_funcs = {
125	nsphyter_service,
126	nsphyter_status,
127	nsphyter_reset
128};
129
130static int
131nsphyter_probe(device_t dev)
132{
133
134	return (mii_phy_dev_probe(dev, nsphyters, BUS_PROBE_DEFAULT));
135}
136
137static int
138nsphyter_attach(device_t dev)
139{
140
141	mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &nsphyter_funcs, 1);
142	return (0);
143}
144
145static int
146nsphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
147{
148
149	switch (cmd) {
150	case MII_POLLSTAT:
151		break;
152
153	case MII_MEDIACHG:
154		mii_phy_setmedia(sc);
155		break;
156
157	case MII_TICK:
158		if (mii_phy_tick(sc) == EJUSTRETURN)
159			return (0);
160		break;
161	}
162
163	/* Update the media status. */
164	PHY_STATUS(sc);
165
166	/* Callback if something changed. */
167	mii_phy_update(sc, cmd);
168	return (0);
169}
170
171static void
172nsphyter_status(struct mii_softc *sc)
173{
174	struct mii_data *mii = sc->mii_pdata;
175	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
176	int bmsr, bmcr, physts;
177
178	mii->mii_media_status = IFM_AVALID;
179	mii->mii_media_active = IFM_ETHER;
180
181	bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
182	physts = PHY_READ(sc, MII_NSPHYTER_PHYSTS);
183
184	if ((physts & PHYSTS_LINK) != 0)
185		mii->mii_media_status |= IFM_ACTIVE;
186
187	bmcr = PHY_READ(sc, MII_BMCR);
188	if ((bmcr & BMCR_ISO) != 0) {
189		mii->mii_media_active |= IFM_NONE;
190		mii->mii_media_status = 0;
191		return;
192	}
193
194	if ((bmcr & BMCR_LOOP) != 0)
195		mii->mii_media_active |= IFM_LOOP;
196
197	if ((bmcr & BMCR_AUTOEN) != 0) {
198		/*
199		 * The media status bits are only valid if autonegotiation
200		 * has completed (or it's disabled).
201		 */
202		if ((bmsr & BMSR_ACOMP) == 0) {
203			/* Erg, still trying, I guess... */
204			mii->mii_media_active |= IFM_NONE;
205			return;
206		}
207
208		if ((physts & PHYSTS_SPEED10) != 0)
209			mii->mii_media_active |= IFM_10_T;
210		else
211			mii->mii_media_active |= IFM_100_TX;
212		if ((physts & PHYSTS_DUPLEX) != 0)
213			mii->mii_media_active |=
214			    IFM_FDX | mii_phy_flowstatus(sc);
215		else
216			mii->mii_media_active |= IFM_HDX;
217	} else
218		mii->mii_media_active = ife->ifm_media;
219}
220
221static void
222nsphyter_reset(struct mii_softc *sc)
223{
224	struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
225	int reg, i;
226
227	if ((sc->mii_flags & MIIF_NOISOLATE) != 0)
228		reg = BMCR_RESET;
229	else
230		reg = BMCR_RESET | BMCR_ISO;
231	PHY_WRITE(sc, MII_BMCR, reg);
232
233	/*
234	 * It is best to allow a little time for the reset to settle
235	 * in before we start polling the BMCR again.  Notably, the
236	 * DP8384{3,7} manuals state that there should be a 500us delay
237	 * between asserting software reset and attempting MII serial
238	 * operations.  Be conservative.  Also, a DP83815 can get into
239	 * a bad state on cable removal and reinsertion if we do not
240	 * delay here.
241	 */
242	DELAY(1000);
243
244	/*
245	 * Wait another 2s for it to complete.
246	 * This is only a little overkill as under normal circumstances
247	 * the PHY can take up to 1s to complete reset.
248	 * This is also a bit odd because after a reset, the BMCR will
249	 * clear the reset bit and simply reports 0 even though the reset
250	 * is not yet complete.
251	 */
252	for (i = 0; i < 1000; i++) {
253		reg = PHY_READ(sc, MII_BMCR);
254		if (reg != 0 && (reg & BMCR_RESET) == 0)
255			break;
256		DELAY(2000);
257	}
258
259	if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
260		if ((ife == NULL && sc->mii_inst != 0) ||
261		    (ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
262			PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
263	}
264}
265