1/*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2007-2017 QLogic Corporation. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 26 * THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29#include <sys/cdefs.h> 30__FBSDID("$FreeBSD$"); 31 32#ifndef ECORE_SP_H 33#define ECORE_SP_H 34 35 36#include <sys/types.h> 37#include <sys/endian.h> 38#include <sys/param.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/malloc.h> 42#include <sys/kernel.h> 43#include <machine/bus.h> 44#include <net/ethernet.h> 45 46#if _BYTE_ORDER == _LITTLE_ENDIAN 47#ifndef LITTLE_ENDIAN 48#define LITTLE_ENDIAN 49#endif 50#ifndef __LITTLE_ENDIAN 51#define __LITTLE_ENDIAN 52#endif 53#undef BIG_ENDIAN 54#undef __BIG_ENDIAN 55#else /* _BIG_ENDIAN */ 56#ifndef BIG_ENDIAN 57#define BIG_ENDIAN 58#endif 59#ifndef __BIG_ENDIAN 60#define __BIG_ENDIAN 61#endif 62#undef LITTLE_ENDIAN 63#undef __LITTLE_ENDIAN 64#endif 65 66#include "ecore_mfw_req.h" 67#include "ecore_fw_defs.h" 68#include "ecore_hsi.h" 69#include "ecore_reg.h" 70 71struct bxe_softc; 72typedef bus_addr_t ecore_dma_addr_t; /* expected to be 64 bit wide */ 73typedef volatile int ecore_atomic_t; 74 75#ifndef __bool_true_false_are_defined 76#ifndef __cplusplus 77#define bool _Bool 78#endif /* !__cplusplus */ 79#endif /* !__bool_true_false_are_defined$ */ 80 81#define ETH_ALEN ETHER_ADDR_LEN /* 6 */ 82 83#define ECORE_SWCID_SHIFT 17 84#define ECORE_SWCID_MASK ((0x1 << ECORE_SWCID_SHIFT) - 1) 85 86#define ECORE_MC_HASH_SIZE 8 87#define ECORE_MC_HASH_OFFSET(sc, i) \ 88 (BAR_TSTRORM_INTMEM + \ 89 TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(FUNC_ID(sc)) + i*4) 90 91#define ECORE_MAX_MULTICAST 64 92#define ECORE_MAX_EMUL_MULTI 1 93 94#define IRO sc->iro_array 95 96typedef struct mtx ECORE_MUTEX; 97#define ECORE_MUTEX_INIT(_mutex) \ 98 mtx_init(_mutex, "ecore_lock", "ECORE Lock", MTX_DEF) 99#define ECORE_MUTEX_LOCK(_mutex) mtx_lock(_mutex) 100#define ECORE_MUTEX_UNLOCK(_mutex) mtx_unlock(_mutex) 101 102typedef struct mtx ECORE_MUTEX_SPIN; 103#define ECORE_SPIN_LOCK_INIT(_spin, _sc) \ 104 mtx_init(_spin, "ecore_lock", "ECORE Lock", MTX_DEF) 105#define ECORE_SPIN_LOCK_BH(_spin) mtx_lock(_spin) /* bh = bottom-half */ 106#define ECORE_SPIN_UNLOCK_BH(_spin) mtx_unlock(_spin) /* bh = bottom-half */ 107 108#define ECORE_SMP_MB_AFTER_CLEAR_BIT() mb() 109#define ECORE_SMP_MB_BEFORE_CLEAR_BIT() mb() 110#define ECORE_SMP_MB() mb() 111#define ECORE_SMP_RMB() rmb() 112#define ECORE_SMP_WMB() wmb() 113#define ECORE_MMIOWB() wmb() 114 115#define ECORE_SET_BIT_NA(bit, var) bit_set(var, bit) /* non-atomic */ 116#define ECORE_CLEAR_BIT_NA(bit, var) bit_clear(var, bit) /* non-atomic */ 117#define ECORE_TEST_BIT(bit, var) bxe_test_bit(bit, var) 118#define ECORE_SET_BIT(bit, var) bxe_set_bit(bit, var) 119#define ECORE_CLEAR_BIT(bit, var) bxe_clear_bit(bit, var) 120#define ECORE_TEST_AND_CLEAR_BIT(bit, var) bxe_test_and_clear_bit(bit, var) 121 122#define ECORE_ATOMIC_READ(a) atomic_load_acq_int((volatile int *)a) 123#define ECORE_ATOMIC_SET(a, v) atomic_store_rel_int((volatile int *)a, v) 124#define ECORE_ATOMIC_CMPXCHG(a, o, n) bxe_cmpxchg((volatile int *)a, o, n) 125 126#define ECORE_RET_PENDING(pending_bit, pending) \ 127 (ECORE_TEST_BIT(pending_bit, pending) ? ECORE_PENDING : ECORE_SUCCESS) 128 129#define ECORE_SET_FLAG(value, mask, flag) \ 130 do { \ 131 (value) &= ~(mask); \ 132 (value) |= ((flag) << (mask##_SHIFT)); \ 133 } while (0) 134 135#define ECORE_GET_FLAG(value, mask) \ 136 (((value) &= (mask)) >> (mask##_SHIFT)) 137 138#define ECORE_MIGHT_SLEEP() 139 140#define ECORE_FCOE_CID(sc) ((sc)->fp[FCOE_IDX(sc)].cl_id) 141 142#define ECORE_MEMCMP(_a, _b, _s) memcmp(_a, _b, _s) 143#define ECORE_MEMCPY(_a, _b, _s) memcpy(_a, _b, _s) 144#define ECORE_MEMSET(_a, _c, _s) memset(_a, _c, _s) 145 146#define ECORE_CPU_TO_LE16(x) htole16(x) 147#define ECORE_CPU_TO_LE32(x) htole32(x) 148 149#define ECORE_WAIT(_s, _t) DELAY(1000) 150#define ECORE_MSLEEP(_t) DELAY((_t) * 1000) 151 152#define ECORE_LIKELY(x) __predict_true(x) 153#define ECORE_UNLIKELY(x) __predict_false(x) 154 155#define ECORE_ZALLOC(_size, _flags, _sc) \ 156 malloc(_size, M_TEMP, (M_NOWAIT | M_ZERO)) 157 158#define ECORE_CALLOC(_len, _size, _flags, _sc) \ 159 mallocarray(_len, _size, M_TEMP, (M_NOWAIT | M_ZERO)) 160 161#define ECORE_FREE(_s, _buf, _size) free(_buf, M_TEMP) 162 163#define SC_ILT(sc) ((sc)->ilt) 164#define ILOG2(x) bxe_ilog2(x) 165 166#define ECORE_ILT_ZALLOC(x, y, size) \ 167 do { \ 168 x = malloc(sizeof(struct bxe_dma), M_DEVBUF, (M_NOWAIT | M_ZERO)); \ 169 if (x) { \ 170 if (bxe_dma_alloc((struct bxe_softc *)sc, \ 171 size, (struct bxe_dma *)x, \ 172 "ECORE_ILT") != 0) { \ 173 free(x, M_DEVBUF); \ 174 x = NULL; \ 175 *y = 0; \ 176 } else { \ 177 *y = ((struct bxe_dma *)x)->paddr; \ 178 } \ 179 } \ 180 } while (0) 181 182#define ECORE_ILT_FREE(x, y, size) \ 183 do { \ 184 if (x) { \ 185 bxe_dma_free((struct bxe_softc *)sc, x); \ 186 free(x, M_DEVBUF); \ 187 x = NULL; \ 188 y = 0; \ 189 } \ 190 } while (0) 191 192#define ECORE_IS_VALID_ETHER_ADDR(_mac) TRUE 193 194#define ECORE_IS_MF_SD_MODE IS_MF_SD_MODE 195#define ECORE_IS_MF_SI_MODE IS_MF_SI_MODE 196#define ECORE_IS_MF_AFEX_MODE IS_MF_AFEX_MODE 197 198#define ECORE_SET_CTX_VALIDATION bxe_set_ctx_validation 199 200#define ECORE_UPDATE_COALESCE_SB_INDEX bxe_update_coalesce_sb_index 201 202#define ECORE_ALIGN(x, a) ((((x) + (a) - 1) / (a)) * (a)) 203 204#define ECORE_REG_WR_DMAE_LEN REG_WR_DMAE_LEN 205 206#define ECORE_PATH_ID SC_PATH 207#define ECORE_PORT_ID SC_PORT 208#define ECORE_FUNC_ID SC_FUNC 209#define ECORE_ABS_FUNC_ID SC_ABS_FUNC 210 211uint32_t calc_crc32(uint8_t *crc32_packet, uint32_t crc32_length, 212 uint32_t crc32_seed, uint8_t complement); 213static inline uint32_t 214ECORE_CRC32_LE(uint32_t seed, uint8_t *mac, uint32_t len) 215{ 216 uint32_t packet_buf[2] = {0}; 217 memcpy(((uint8_t *)(&packet_buf[0]))+2, &mac[0], 2); 218 memcpy(&packet_buf[1], &mac[2], 4); 219 return bswap32(calc_crc32((uint8_t *)packet_buf, 8, seed, 0)); 220} 221 222#define ecore_sp_post(_sc, _a, _b, _c, _d) \ 223 bxe_sp_post(_sc, _a, _b, U64_HI(_c), U64_LO(_c), _d) 224 225#ifdef ECORE_STOP_ON_ERROR 226 227#define ECORE_DBG_BREAK_IF(exp) \ 228 do { \ 229 if (__predict_false(exp)) { \ 230 panic("ECORE"); \ 231 } \ 232 } while (0) 233 234#define ECORE_BUG() \ 235 do { \ 236 panic("BUG (%s:%d)", __FILE__, __LINE__); \ 237 } while(0); 238 239#define ECORE_BUG_ON(exp) \ 240 do { \ 241 if (__predict_true(exp)) { \ 242 panic("BUG_ON (%s:%d)", __FILE__, __LINE__); \ 243 } \ 244 } while (0) 245 246#else 247 248 249extern unsigned long bxe_debug; 250#define BXE_DEBUG_ECORE_DBG_BREAK_IF 0x01 251#define BXE_DEBUG_ECORE_BUG 0x02 252#define BXE_DEBUG_ECORE_BUG_ON 0x04 253 254#define ECORE_DBG_BREAK_IF(exp) \ 255 if (bxe_debug & BXE_DEBUG_ECORE_DBG_BREAK_IF) \ 256 printf("%s (%s,%d)\n", __FUNCTION__, __FILE__, __LINE__); 257 258#define ECORE_BUG(exp) \ 259 if (bxe_debug & BXE_DEBUG_ECORE_BUG) \ 260 printf("%s (%s,%d)\n", __FUNCTION__, __FILE__, __LINE__); 261 262#define ECORE_BUG_ON(exp) \ 263 if (bxe_debug & BXE_DEBUG_ECORE_BUG_ON) \ 264 printf("%s (%s,%d)\n", __FUNCTION__, __FILE__, __LINE__); 265 266 267#endif /* #ifdef ECORE_STOP_ON_ERROR */ 268 269#define ECORE_ERR(str, ...) \ 270 BLOGE(sc, "ECORE: " str, ##__VA_ARGS__) 271 272#define DBG_SP 0x00000004 /* defined in bxe.h */ 273 274#define ECORE_MSG(sc, m, ...) \ 275 BLOGD(sc, DBG_SP, "ECORE: " m, ##__VA_ARGS__) 276 277typedef struct _ecore_list_entry_t 278{ 279 struct _ecore_list_entry_t *next, *prev; 280} ecore_list_entry_t; 281 282typedef struct ecore_list_t 283{ 284 ecore_list_entry_t *head, *tail; 285 unsigned long cnt; 286} ecore_list_t; 287 288/* initialize the list */ 289#define ECORE_LIST_INIT(_list) \ 290 do { \ 291 (_list)->head = NULL; \ 292 (_list)->tail = NULL; \ 293 (_list)->cnt = 0; \ 294 } while (0) 295 296/* return TRUE if the element is the last on the list */ 297#define ECORE_LIST_IS_LAST(_elem, _list) \ 298 (_elem == (_list)->tail) 299 300/* return TRUE if the list is empty */ 301#define ECORE_LIST_IS_EMPTY(_list) \ 302 ((_list)->cnt == 0) 303 304/* return the first element */ 305#define ECORE_LIST_FIRST_ENTRY(_list, cast, _link) \ 306 (cast *)((_list)->head) 307 308/* return the next element */ 309#define ECORE_LIST_NEXT(_elem, _link, cast) \ 310 (cast *)((&((_elem)->_link))->next) 311 312/* push an element on the head of the list */ 313#define ECORE_LIST_PUSH_HEAD(_elem, _list) \ 314 do { \ 315 (_elem)->prev = (ecore_list_entry_t *)0; \ 316 (_elem)->next = (_list)->head; \ 317 if ((_list)->tail == (ecore_list_entry_t *)0) { \ 318 (_list)->tail = (_elem); \ 319 } else { \ 320 (_list)->head->prev = (_elem); \ 321 } \ 322 (_list)->head = (_elem); \ 323 (_list)->cnt++; \ 324 } while (0) 325 326/* push an element on the tail of the list */ 327#define ECORE_LIST_PUSH_TAIL(_elem, _list) \ 328 do { \ 329 (_elem)->next = (ecore_list_entry_t *)0; \ 330 (_elem)->prev = (_list)->tail; \ 331 if ((_list)->tail) { \ 332 (_list)->tail->next = (_elem); \ 333 } else { \ 334 (_list)->head = (_elem); \ 335 } \ 336 (_list)->tail = (_elem); \ 337 (_list)->cnt++; \ 338 } while (0) 339 340/* push list1 on the head of list2 and return with list1 as empty */ 341#define ECORE_LIST_SPLICE_INIT(_list1, _list2) \ 342 do { \ 343 (_list1)->tail->next = (_list2)->head; \ 344 if ((_list2)->head) { \ 345 (_list2)->head->prev = (_list1)->tail; \ 346 } else { \ 347 (_list2)->tail = (_list1)->tail; \ 348 } \ 349 (_list2)->head = (_list1)->head; \ 350 (_list2)->cnt += (_list1)->cnt; \ 351 (_list1)->head = NULL; \ 352 (_list1)->tail = NULL; \ 353 (_list1)->cnt = 0; \ 354 } while (0) 355 356/* remove an element from the list */ 357#define ECORE_LIST_REMOVE_ENTRY(_elem, _list) \ 358 do { \ 359 if ((_list)->head == (_elem)) { \ 360 if ((_list)->head) { \ 361 (_list)->head = (_list)->head->next; \ 362 if ((_list)->head) { \ 363 (_list)->head->prev = (ecore_list_entry_t *)0; \ 364 } else { \ 365 (_list)->tail = (ecore_list_entry_t *)0; \ 366 } \ 367 (_list)->cnt--; \ 368 } \ 369 } else if ((_list)->tail == (_elem)) { \ 370 if ((_list)->tail) { \ 371 (_list)->tail = (_list)->tail->prev; \ 372 if ((_list)->tail) { \ 373 (_list)->tail->next = (ecore_list_entry_t *)0; \ 374 } else { \ 375 (_list)->head = (ecore_list_entry_t *)0; \ 376 } \ 377 (_list)->cnt--; \ 378 } \ 379 } else { \ 380 (_elem)->prev->next = (_elem)->next; \ 381 (_elem)->next->prev = (_elem)->prev; \ 382 (_list)->cnt--; \ 383 } \ 384 } while (0) 385 386/* walk the list */ 387#define ECORE_LIST_FOR_EACH_ENTRY(pos, _list, _link, cast) \ 388 for (pos = ECORE_LIST_FIRST_ENTRY(_list, cast, _link); \ 389 pos; \ 390 pos = ECORE_LIST_NEXT(pos, _link, cast)) 391 392/* walk the list (safely) */ 393#define ECORE_LIST_FOR_EACH_ENTRY_SAFE(pos, n, _list, _link, cast) \ 394 for (pos = ECORE_LIST_FIRST_ENTRY(_list, cast, _lint), \ 395 n = (pos) ? ECORE_LIST_NEXT(pos, _link, cast) : NULL; \ 396 pos != NULL; \ 397 pos = (cast *)n, \ 398 n = (pos) ? ECORE_LIST_NEXT(pos, _link, cast) : NULL) 399 400 401/* Manipulate a bit vector defined as an array of uint64_t */ 402 403/* Number of bits in one sge_mask array element */ 404#define BIT_VEC64_ELEM_SZ 64 405#define BIT_VEC64_ELEM_SHIFT 6 406#define BIT_VEC64_ELEM_MASK ((uint64_t)BIT_VEC64_ELEM_SZ - 1) 407 408#define __BIT_VEC64_SET_BIT(el, bit) \ 409 do { \ 410 el = ((el) | ((uint64_t)0x1 << (bit))); \ 411 } while (0) 412 413#define __BIT_VEC64_CLEAR_BIT(el, bit) \ 414 do { \ 415 el = ((el) & (~((uint64_t)0x1 << (bit)))); \ 416 } while (0) 417 418#define BIT_VEC64_SET_BIT(vec64, idx) \ 419 __BIT_VEC64_SET_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \ 420 (idx) & BIT_VEC64_ELEM_MASK) 421 422#define BIT_VEC64_CLEAR_BIT(vec64, idx) \ 423 __BIT_VEC64_CLEAR_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \ 424 (idx) & BIT_VEC64_ELEM_MASK) 425 426#define BIT_VEC64_TEST_BIT(vec64, idx) \ 427 (((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT] >> \ 428 ((idx) & BIT_VEC64_ELEM_MASK)) & 0x1) 429 430/* 431 * Creates a bitmask of all ones in less significant bits. 432 * idx - index of the most significant bit in the created mask 433 */ 434#define BIT_VEC64_ONES_MASK(idx) \ 435 (((uint64_t)0x1 << (((idx) & BIT_VEC64_ELEM_MASK) + 1)) - 1) 436#define BIT_VEC64_ELEM_ONE_MASK ((uint64_t)(~0)) 437 438/* fill in a MAC address the way the FW likes it */ 439static inline void 440ecore_set_fw_mac_addr(uint16_t *fw_hi, 441 uint16_t *fw_mid, 442 uint16_t *fw_lo, 443 uint8_t *mac) 444{ 445 ((uint8_t *)fw_hi)[0] = mac[1]; 446 ((uint8_t *)fw_hi)[1] = mac[0]; 447 ((uint8_t *)fw_mid)[0] = mac[3]; 448 ((uint8_t *)fw_mid)[1] = mac[2]; 449 ((uint8_t *)fw_lo)[0] = mac[5]; 450 ((uint8_t *)fw_lo)[1] = mac[4]; 451} 452 453 454enum ecore_status_t { 455 ECORE_EXISTS = -6, 456 ECORE_IO = -5, 457 ECORE_TIMEOUT = -4, 458 ECORE_INVAL = -3, 459 ECORE_BUSY = -2, 460 ECORE_NOMEM = -1, 461 ECORE_SUCCESS = 0, 462 /* PENDING is not an error and should be positive */ 463 ECORE_PENDING = 1, 464}; 465 466enum { 467 SWITCH_UPDATE, 468 AFEX_UPDATE, 469}; 470 471 472 473 474struct bxe_softc; 475struct eth_context; 476 477/* Bits representing general command's configuration */ 478enum { 479 RAMROD_TX, 480 RAMROD_RX, 481 /* Wait until all pending commands complete */ 482 RAMROD_COMP_WAIT, 483 /* Don't send a ramrod, only update a registry */ 484 RAMROD_DRV_CLR_ONLY, 485 /* Configure HW according to the current object state */ 486 RAMROD_RESTORE, 487 /* Execute the next command now */ 488 RAMROD_EXEC, 489 /* Don't add a new command and continue execution of posponed 490 * commands. If not set a new command will be added to the 491 * pending commands list. 492 */ 493 RAMROD_CONT, 494 /* If there is another pending ramrod, wait until it finishes and 495 * re-try to submit this one. This flag can be set only in sleepable 496 * context, and should not be set from the context that completes the 497 * ramrods as deadlock will occur. 498 */ 499 RAMROD_RETRY, 500}; 501 502typedef enum { 503 ECORE_OBJ_TYPE_RX, 504 ECORE_OBJ_TYPE_TX, 505 ECORE_OBJ_TYPE_RX_TX, 506} ecore_obj_type; 507 508/* Public slow path states */ 509enum { 510 ECORE_FILTER_MAC_PENDING, 511 ECORE_FILTER_VLAN_PENDING, 512 ECORE_FILTER_VLAN_MAC_PENDING, 513 ECORE_FILTER_RX_MODE_PENDING, 514 ECORE_FILTER_RX_MODE_SCHED, 515 ECORE_FILTER_ISCSI_ETH_START_SCHED, 516 ECORE_FILTER_ISCSI_ETH_STOP_SCHED, 517 ECORE_FILTER_FCOE_ETH_START_SCHED, 518 ECORE_FILTER_FCOE_ETH_STOP_SCHED, 519 ECORE_FILTER_BYPASS_RX_MODE_PENDING, 520 ECORE_FILTER_BYPASS_MAC_PENDING, 521 ECORE_FILTER_BYPASS_RSS_CONF_PENDING, 522 ECORE_FILTER_MCAST_PENDING, 523 ECORE_FILTER_MCAST_SCHED, 524 ECORE_FILTER_RSS_CONF_PENDING, 525 ECORE_AFEX_FCOE_Q_UPDATE_PENDING, 526 ECORE_AFEX_PENDING_VIFSET_MCP_ACK, 527 ECORE_FILTER_VXLAN_PENDING 528}; 529 530struct ecore_raw_obj { 531 uint8_t func_id; 532 533 /* Queue params */ 534 uint8_t cl_id; 535 uint32_t cid; 536 537 /* Ramrod data buffer params */ 538 void *rdata; 539 ecore_dma_addr_t rdata_mapping; 540 541 /* Ramrod state params */ 542 int state; /* "ramrod is pending" state bit */ 543 unsigned long *pstate; /* pointer to state buffer */ 544 545 ecore_obj_type obj_type; 546 547 int (*wait_comp)(struct bxe_softc *sc, 548 struct ecore_raw_obj *o); 549 550 bool (*check_pending)(struct ecore_raw_obj *o); 551 void (*clear_pending)(struct ecore_raw_obj *o); 552 void (*set_pending)(struct ecore_raw_obj *o); 553}; 554 555/************************* VLAN-MAC commands related parameters ***************/ 556struct ecore_mac_ramrod_data { 557 uint8_t mac[ETH_ALEN]; 558 uint8_t is_inner_mac; 559}; 560 561struct ecore_vlan_ramrod_data { 562 uint16_t vlan; 563}; 564 565struct ecore_vlan_mac_ramrod_data { 566 uint8_t mac[ETH_ALEN]; 567 uint8_t is_inner_mac; 568 uint16_t vlan; 569}; 570 571struct ecore_vxlan_fltr_ramrod_data { 572 uint8_t innermac[ETH_ALEN]; 573 uint32_t vni; 574}; 575 576union ecore_classification_ramrod_data { 577 struct ecore_mac_ramrod_data mac; 578 struct ecore_vlan_ramrod_data vlan; 579 struct ecore_vlan_mac_ramrod_data vlan_mac; 580 struct ecore_vxlan_fltr_ramrod_data vxlan_fltr; 581}; 582 583/* VLAN_MAC commands */ 584enum ecore_vlan_mac_cmd { 585 ECORE_VLAN_MAC_ADD, 586 ECORE_VLAN_MAC_DEL, 587 ECORE_VLAN_MAC_MOVE, 588}; 589 590struct ecore_vlan_mac_data { 591 /* Requested command: ECORE_VLAN_MAC_XX */ 592 enum ecore_vlan_mac_cmd cmd; 593 /* used to contain the data related vlan_mac_flags bits from 594 * ramrod parameters. 595 */ 596 unsigned long vlan_mac_flags; 597 598 /* Needed for MOVE command */ 599 struct ecore_vlan_mac_obj *target_obj; 600 601 union ecore_classification_ramrod_data u; 602}; 603 604/*************************** Exe Queue obj ************************************/ 605union ecore_exe_queue_cmd_data { 606 struct ecore_vlan_mac_data vlan_mac; 607 608 struct { 609 /* TODO */ 610 } mcast; 611}; 612 613struct ecore_exeq_elem { 614 ecore_list_entry_t link; 615 616 /* Length of this element in the exe_chunk. */ 617 int cmd_len; 618 619 union ecore_exe_queue_cmd_data cmd_data; 620}; 621 622union ecore_qable_obj; 623 624union ecore_exeq_comp_elem { 625 union event_ring_elem *elem; 626}; 627 628struct ecore_exe_queue_obj; 629 630typedef int (*exe_q_validate)(struct bxe_softc *sc, 631 union ecore_qable_obj *o, 632 struct ecore_exeq_elem *elem); 633 634typedef int (*exe_q_remove)(struct bxe_softc *sc, 635 union ecore_qable_obj *o, 636 struct ecore_exeq_elem *elem); 637 638/* Return positive if entry was optimized, 0 - if not, negative 639 * in case of an error. 640 */ 641typedef int (*exe_q_optimize)(struct bxe_softc *sc, 642 union ecore_qable_obj *o, 643 struct ecore_exeq_elem *elem); 644typedef int (*exe_q_execute)(struct bxe_softc *sc, 645 union ecore_qable_obj *o, 646 ecore_list_t *exe_chunk, 647 unsigned long *ramrod_flags); 648typedef struct ecore_exeq_elem * 649 (*exe_q_get)(struct ecore_exe_queue_obj *o, 650 struct ecore_exeq_elem *elem); 651 652struct ecore_exe_queue_obj { 653 /* Commands pending for an execution. */ 654 ecore_list_t exe_queue; 655 656 /* Commands pending for an completion. */ 657 ecore_list_t pending_comp; 658 659 ECORE_MUTEX_SPIN lock; 660 661 /* Maximum length of commands' list for one execution */ 662 int exe_chunk_len; 663 664 union ecore_qable_obj *owner; 665 666 /****** Virtual functions ******/ 667 /** 668 * Called before commands execution for commands that are really 669 * going to be executed (after 'optimize'). 670 * 671 * Must run under exe_queue->lock 672 */ 673 exe_q_validate validate; 674 675 /** 676 * Called before removing pending commands, cleaning allocated 677 * resources (e.g., credits from validate) 678 */ 679 exe_q_remove remove; 680 681 /** 682 * This will try to cancel the current pending commands list 683 * considering the new command. 684 * 685 * Returns the number of optimized commands or a negative error code 686 * 687 * Must run under exe_queue->lock 688 */ 689 exe_q_optimize optimize; 690 691 /** 692 * Run the next commands chunk (owner specific). 693 */ 694 exe_q_execute execute; 695 696 /** 697 * Return the exe_queue element containing the specific command 698 * if any. Otherwise return NULL. 699 */ 700 exe_q_get get; 701}; 702/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/ 703/* 704 * Element in the VLAN_MAC registry list having all current configured 705 * rules. 706 */ 707struct ecore_vlan_mac_registry_elem { 708 ecore_list_entry_t link; 709 710 /* Used to store the cam offset used for the mac/vlan/vlan-mac. 711 * Relevant for 57710 and 57711 only. VLANs and MACs share the 712 * same CAM for these chips. 713 */ 714 int cam_offset; 715 716 /* Needed for DEL and RESTORE flows */ 717 unsigned long vlan_mac_flags; 718 719 union ecore_classification_ramrod_data u; 720}; 721 722/* Bits representing VLAN_MAC commands specific flags */ 723enum { 724 ECORE_UC_LIST_MAC, 725 ECORE_ETH_MAC, 726 ECORE_ISCSI_ETH_MAC, 727 ECORE_NETQ_ETH_MAC, 728 ECORE_DONT_CONSUME_CAM_CREDIT, 729 ECORE_DONT_CONSUME_CAM_CREDIT_DEST, 730}; 731/* When looking for matching filters, some flags are not interesting */ 732#define ECORE_VLAN_MAC_CMP_MASK (1 << ECORE_UC_LIST_MAC | \ 733 1 << ECORE_ETH_MAC | \ 734 1 << ECORE_ISCSI_ETH_MAC | \ 735 1 << ECORE_NETQ_ETH_MAC) 736#define ECORE_VLAN_MAC_CMP_FLAGS(flags) \ 737 ((flags) & ECORE_VLAN_MAC_CMP_MASK) 738 739struct ecore_vlan_mac_ramrod_params { 740 /* Object to run the command from */ 741 struct ecore_vlan_mac_obj *vlan_mac_obj; 742 743 /* General command flags: COMP_WAIT, etc. */ 744 unsigned long ramrod_flags; 745 746 /* Command specific configuration request */ 747 struct ecore_vlan_mac_data user_req; 748}; 749 750struct ecore_vlan_mac_obj { 751 struct ecore_raw_obj raw; 752 753 /* Bookkeeping list: will prevent the addition of already existing 754 * entries. 755 */ 756 ecore_list_t head; 757 /* Implement a simple reader/writer lock on the head list. 758 * all these fields should only be accessed under the exe_queue lock 759 */ 760 uint8_t head_reader; /* Num. of readers accessing head list */ 761 bool head_exe_request; /* Pending execution request. */ 762 unsigned long saved_ramrod_flags; /* Ramrods of pending execution */ 763 764 /* Execution queue interface instance */ 765 struct ecore_exe_queue_obj exe_queue; 766 767 /* MACs credit pool */ 768 struct ecore_credit_pool_obj *macs_pool; 769 770 /* VLANs credit pool */ 771 struct ecore_credit_pool_obj *vlans_pool; 772 773 /* RAMROD command to be used */ 774 int ramrod_cmd; 775 776 /* copy first n elements onto preallocated buffer 777 * 778 * @param n number of elements to get 779 * @param buf buffer preallocated by caller into which elements 780 * will be copied. Note elements are 4-byte aligned 781 * so buffer size must be able to accommodate the 782 * aligned elements. 783 * 784 * @return number of copied bytes 785 */ 786 787 int (*get_n_elements)(struct bxe_softc *sc, 788 struct ecore_vlan_mac_obj *o, int n, uint8_t *base, 789 uint8_t stride, uint8_t size); 790 791 /** 792 * Checks if ADD-ramrod with the given params may be performed. 793 * 794 * @return zero if the element may be added 795 */ 796 797 int (*check_add)(struct bxe_softc *sc, 798 struct ecore_vlan_mac_obj *o, 799 union ecore_classification_ramrod_data *data); 800 801 /** 802 * Checks if DEL-ramrod with the given params may be performed. 803 * 804 * @return TRUE if the element may be deleted 805 */ 806 struct ecore_vlan_mac_registry_elem * 807 (*check_del)(struct bxe_softc *sc, 808 struct ecore_vlan_mac_obj *o, 809 union ecore_classification_ramrod_data *data); 810 811 /** 812 * Checks if DEL-ramrod with the given params may be performed. 813 * 814 * @return TRUE if the element may be deleted 815 */ 816 bool (*check_move)(struct bxe_softc *sc, 817 struct ecore_vlan_mac_obj *src_o, 818 struct ecore_vlan_mac_obj *dst_o, 819 union ecore_classification_ramrod_data *data); 820 821 /** 822 * Update the relevant credit object(s) (consume/return 823 * correspondingly). 824 */ 825 bool (*get_credit)(struct ecore_vlan_mac_obj *o); 826 bool (*put_credit)(struct ecore_vlan_mac_obj *o); 827 bool (*get_cam_offset)(struct ecore_vlan_mac_obj *o, int *offset); 828 bool (*put_cam_offset)(struct ecore_vlan_mac_obj *o, int offset); 829 830 /** 831 * Configures one rule in the ramrod data buffer. 832 */ 833 void (*set_one_rule)(struct bxe_softc *sc, 834 struct ecore_vlan_mac_obj *o, 835 struct ecore_exeq_elem *elem, int rule_idx, 836 int cam_offset); 837 838 /** 839 * Delete all configured elements having the given 840 * vlan_mac_flags specification. Assumes no pending for 841 * execution commands. Will schedule all all currently 842 * configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags 843 * specification for deletion and will use the given 844 * ramrod_flags for the last DEL operation. 845 * 846 * @param sc 847 * @param o 848 * @param ramrod_flags RAMROD_XX flags 849 * 850 * @return 0 if the last operation has completed successfully 851 * and there are no more elements left, positive value 852 * if there are pending for completion commands, 853 * negative value in case of failure. 854 */ 855 int (*delete_all)(struct bxe_softc *sc, 856 struct ecore_vlan_mac_obj *o, 857 unsigned long *vlan_mac_flags, 858 unsigned long *ramrod_flags); 859 860 /** 861 * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously 862 * configured elements list. 863 * 864 * @param sc 865 * @param p Command parameters (RAMROD_COMP_WAIT bit in 866 * ramrod_flags is only taken into an account) 867 * @param ppos a pointer to the cookie that should be given back in the 868 * next call to make function handle the next element. If 869 * *ppos is set to NULL it will restart the iterator. 870 * If returned *ppos == NULL this means that the last 871 * element has been handled. 872 * 873 * @return int 874 */ 875 int (*restore)(struct bxe_softc *sc, 876 struct ecore_vlan_mac_ramrod_params *p, 877 struct ecore_vlan_mac_registry_elem **ppos); 878 879 /** 880 * Should be called on a completion arrival. 881 * 882 * @param sc 883 * @param o 884 * @param cqe Completion element we are handling 885 * @param ramrod_flags if RAMROD_CONT is set the next bulk of 886 * pending commands will be executed. 887 * RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE 888 * may also be set if needed. 889 * 890 * @return 0 if there are neither pending nor waiting for 891 * completion commands. Positive value if there are 892 * pending for execution or for completion commands. 893 * Negative value in case of an error (including an 894 * error in the cqe). 895 */ 896 int (*complete)(struct bxe_softc *sc, struct ecore_vlan_mac_obj *o, 897 union event_ring_elem *cqe, 898 unsigned long *ramrod_flags); 899 900 /** 901 * Wait for completion of all commands. Don't schedule new ones, 902 * just wait. It assumes that the completion code will schedule 903 * for new commands. 904 */ 905 int (*wait)(struct bxe_softc *sc, struct ecore_vlan_mac_obj *o); 906}; 907 908enum { 909 ECORE_LLH_CAM_ISCSI_ETH_LINE = 0, 910 ECORE_LLH_CAM_ETH_LINE, 911 ECORE_LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE / 2 912}; 913 914void ecore_set_mac_in_nig(struct bxe_softc *sc, 915 bool add, unsigned char *dev_addr, int index); 916 917/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */ 918 919/* RX_MODE ramrod special flags: set in rx_mode_flags field in 920 * a ecore_rx_mode_ramrod_params. 921 */ 922enum { 923 ECORE_RX_MODE_FCOE_ETH, 924 ECORE_RX_MODE_ISCSI_ETH, 925}; 926 927enum { 928 ECORE_ACCEPT_UNICAST, 929 ECORE_ACCEPT_MULTICAST, 930 ECORE_ACCEPT_ALL_UNICAST, 931 ECORE_ACCEPT_ALL_MULTICAST, 932 ECORE_ACCEPT_BROADCAST, 933 ECORE_ACCEPT_UNMATCHED, 934 ECORE_ACCEPT_ANY_VLAN 935}; 936 937struct ecore_rx_mode_ramrod_params { 938 struct ecore_rx_mode_obj *rx_mode_obj; 939 unsigned long *pstate; 940 int state; 941 uint8_t cl_id; 942 uint32_t cid; 943 uint8_t func_id; 944 unsigned long ramrod_flags; 945 unsigned long rx_mode_flags; 946 947 /* rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to 948 * a tstorm_eth_mac_filter_config (e1x). 949 */ 950 void *rdata; 951 ecore_dma_addr_t rdata_mapping; 952 953 /* Rx mode settings */ 954 unsigned long rx_accept_flags; 955 956 /* internal switching settings */ 957 unsigned long tx_accept_flags; 958}; 959 960struct ecore_rx_mode_obj { 961 int (*config_rx_mode)(struct bxe_softc *sc, 962 struct ecore_rx_mode_ramrod_params *p); 963 964 int (*wait_comp)(struct bxe_softc *sc, 965 struct ecore_rx_mode_ramrod_params *p); 966}; 967 968/********************** Set multicast group ***********************************/ 969 970struct ecore_mcast_list_elem { 971 ecore_list_entry_t link; 972 uint8_t *mac; 973}; 974 975union ecore_mcast_config_data { 976 uint8_t *mac; 977 uint8_t bin; /* used in a RESTORE flow */ 978}; 979 980struct ecore_mcast_ramrod_params { 981 struct ecore_mcast_obj *mcast_obj; 982 983 /* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */ 984 unsigned long ramrod_flags; 985 986 ecore_list_t mcast_list; /* list of struct ecore_mcast_list_elem */ 987 /** TODO: 988 * - rename it to macs_num. 989 * - Add a new command type for handling pending commands 990 * (remove "zero semantics"). 991 * 992 * Length of mcast_list. If zero and ADD_CONT command - post 993 * pending commands. 994 */ 995 int mcast_list_len; 996}; 997 998enum ecore_mcast_cmd { 999 ECORE_MCAST_CMD_ADD, 1000 ECORE_MCAST_CMD_CONT, 1001 ECORE_MCAST_CMD_DEL, 1002 ECORE_MCAST_CMD_RESTORE, 1003}; 1004 1005struct ecore_mcast_obj { 1006 struct ecore_raw_obj raw; 1007 1008 union { 1009 struct { 1010 #define ECORE_MCAST_BINS_NUM 256 1011 #define ECORE_MCAST_VEC_SZ (ECORE_MCAST_BINS_NUM / 64) 1012 uint64_t vec[ECORE_MCAST_VEC_SZ]; 1013 1014 /** Number of BINs to clear. Should be updated 1015 * immediately when a command arrives in order to 1016 * properly create DEL commands. 1017 */ 1018 int num_bins_set; 1019 } aprox_match; 1020 1021 struct { 1022 ecore_list_t macs; 1023 int num_macs_set; 1024 } exact_match; 1025 } registry; 1026 1027 /* Pending commands */ 1028 ecore_list_t pending_cmds_head; 1029 1030 /* A state that is set in raw.pstate, when there are pending commands */ 1031 int sched_state; 1032 1033 /* Maximal number of mcast MACs configured in one command */ 1034 int max_cmd_len; 1035 1036 /* Total number of currently pending MACs to configure: both 1037 * in the pending commands list and in the current command. 1038 */ 1039 int total_pending_num; 1040 1041 uint8_t engine_id; 1042 1043 /** 1044 * @param cmd command to execute (ECORE_MCAST_CMD_X, see above) 1045 */ 1046 int (*config_mcast)(struct bxe_softc *sc, 1047 struct ecore_mcast_ramrod_params *p, 1048 enum ecore_mcast_cmd cmd); 1049 1050 /** 1051 * Fills the ramrod data during the RESTORE flow. 1052 * 1053 * @param sc 1054 * @param o 1055 * @param start_idx Registry index to start from 1056 * @param rdata_idx Index in the ramrod data to start from 1057 * 1058 * @return -1 if we handled the whole registry or index of the last 1059 * handled registry element. 1060 */ 1061 int (*hdl_restore)(struct bxe_softc *sc, struct ecore_mcast_obj *o, 1062 int start_bin, int *rdata_idx); 1063 1064 int (*enqueue_cmd)(struct bxe_softc *sc, struct ecore_mcast_obj *o, 1065 struct ecore_mcast_ramrod_params *p, 1066 enum ecore_mcast_cmd cmd); 1067 1068 void (*set_one_rule)(struct bxe_softc *sc, 1069 struct ecore_mcast_obj *o, int idx, 1070 union ecore_mcast_config_data *cfg_data, 1071 enum ecore_mcast_cmd cmd); 1072 1073 /** Checks if there are more mcast MACs to be set or a previous 1074 * command is still pending. 1075 */ 1076 bool (*check_pending)(struct ecore_mcast_obj *o); 1077 1078 /** 1079 * Set/Clear/Check SCHEDULED state of the object 1080 */ 1081 void (*set_sched)(struct ecore_mcast_obj *o); 1082 void (*clear_sched)(struct ecore_mcast_obj *o); 1083 bool (*check_sched)(struct ecore_mcast_obj *o); 1084 1085 /* Wait until all pending commands complete */ 1086 int (*wait_comp)(struct bxe_softc *sc, struct ecore_mcast_obj *o); 1087 1088 /** 1089 * Handle the internal object counters needed for proper 1090 * commands handling. Checks that the provided parameters are 1091 * feasible. 1092 */ 1093 int (*validate)(struct bxe_softc *sc, 1094 struct ecore_mcast_ramrod_params *p, 1095 enum ecore_mcast_cmd cmd); 1096 1097 /** 1098 * Restore the values of internal counters in case of a failure. 1099 */ 1100 void (*revert)(struct bxe_softc *sc, 1101 struct ecore_mcast_ramrod_params *p, 1102 int old_num_bins); 1103 1104 int (*get_registry_size)(struct ecore_mcast_obj *o); 1105 void (*set_registry_size)(struct ecore_mcast_obj *o, int n); 1106}; 1107 1108/*************************** Credit handling **********************************/ 1109struct ecore_credit_pool_obj { 1110 1111 /* Current amount of credit in the pool */ 1112 ecore_atomic_t credit; 1113 1114 /* Maximum allowed credit. put() will check against it. */ 1115 int pool_sz; 1116 1117 /* Allocate a pool table statically. 1118 * 1119 * Currently the maximum allowed size is MAX_MAC_CREDIT_E2(272) 1120 * 1121 * The set bit in the table will mean that the entry is available. 1122 */ 1123#define ECORE_POOL_VEC_SIZE (MAX_MAC_CREDIT_E2 / 64) 1124 uint64_t pool_mirror[ECORE_POOL_VEC_SIZE]; 1125 1126 /* Base pool offset (initialized differently */ 1127 int base_pool_offset; 1128 1129 /** 1130 * Get the next free pool entry. 1131 * 1132 * @return TRUE if there was a free entry in the pool 1133 */ 1134 bool (*get_entry)(struct ecore_credit_pool_obj *o, int *entry); 1135 1136 /** 1137 * Return the entry back to the pool. 1138 * 1139 * @return TRUE if entry is legal and has been successfully 1140 * returned to the pool. 1141 */ 1142 bool (*put_entry)(struct ecore_credit_pool_obj *o, int entry); 1143 1144 /** 1145 * Get the requested amount of credit from the pool. 1146 * 1147 * @param cnt Amount of requested credit 1148 * @return TRUE if the operation is successful 1149 */ 1150 bool (*get)(struct ecore_credit_pool_obj *o, int cnt); 1151 1152 /** 1153 * Returns the credit to the pool. 1154 * 1155 * @param cnt Amount of credit to return 1156 * @return TRUE if the operation is successful 1157 */ 1158 bool (*put)(struct ecore_credit_pool_obj *o, int cnt); 1159 1160 /** 1161 * Reads the current amount of credit. 1162 */ 1163 int (*check)(struct ecore_credit_pool_obj *o); 1164}; 1165 1166/*************************** RSS configuration ********************************/ 1167enum { 1168 /* RSS_MODE bits are mutually exclusive */ 1169 ECORE_RSS_MODE_DISABLED, 1170 ECORE_RSS_MODE_REGULAR, 1171 1172 ECORE_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */ 1173 1174 ECORE_RSS_IPV4, 1175 ECORE_RSS_IPV4_TCP, 1176 ECORE_RSS_IPV4_UDP, 1177 ECORE_RSS_IPV6, 1178 ECORE_RSS_IPV6_TCP, 1179 ECORE_RSS_IPV6_UDP, 1180 1181 ECORE_RSS_IPV4_VXLAN, 1182 ECORE_RSS_IPV6_VXLAN, 1183 ECORE_RSS_TUNN_INNER_HDRS, 1184}; 1185 1186struct ecore_config_rss_params { 1187 struct ecore_rss_config_obj *rss_obj; 1188 1189 /* may have RAMROD_COMP_WAIT set only */ 1190 unsigned long ramrod_flags; 1191 1192 /* ECORE_RSS_X bits */ 1193 unsigned long rss_flags; 1194 1195 /* Number hash bits to take into an account */ 1196 uint8_t rss_result_mask; 1197 1198 /* Indirection table */ 1199 uint8_t ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; 1200 1201 /* RSS hash values */ 1202 uint32_t rss_key[10]; 1203 1204 /* valid only iff ECORE_RSS_UPDATE_TOE is set */ 1205 uint16_t toe_rss_bitmap; 1206}; 1207 1208struct ecore_rss_config_obj { 1209 struct ecore_raw_obj raw; 1210 1211 /* RSS engine to use */ 1212 uint8_t engine_id; 1213 1214 /* Last configured indirection table */ 1215 uint8_t ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; 1216 1217 /* flags for enabling 4-tupple hash on UDP */ 1218 uint8_t udp_rss_v4; 1219 uint8_t udp_rss_v6; 1220 1221 int (*config_rss)(struct bxe_softc *sc, 1222 struct ecore_config_rss_params *p); 1223}; 1224 1225/*********************** Queue state update ***********************************/ 1226 1227/* UPDATE command options */ 1228enum { 1229 ECORE_Q_UPDATE_IN_VLAN_REM, 1230 ECORE_Q_UPDATE_IN_VLAN_REM_CHNG, 1231 ECORE_Q_UPDATE_OUT_VLAN_REM, 1232 ECORE_Q_UPDATE_OUT_VLAN_REM_CHNG, 1233 ECORE_Q_UPDATE_ANTI_SPOOF, 1234 ECORE_Q_UPDATE_ANTI_SPOOF_CHNG, 1235 ECORE_Q_UPDATE_ACTIVATE, 1236 ECORE_Q_UPDATE_ACTIVATE_CHNG, 1237 ECORE_Q_UPDATE_DEF_VLAN_EN, 1238 ECORE_Q_UPDATE_DEF_VLAN_EN_CHNG, 1239 ECORE_Q_UPDATE_SILENT_VLAN_REM_CHNG, 1240 ECORE_Q_UPDATE_SILENT_VLAN_REM, 1241 ECORE_Q_UPDATE_TX_SWITCHING_CHNG, 1242 ECORE_Q_UPDATE_TX_SWITCHING, 1243 ECORE_Q_UPDATE_PTP_PKTS_CHNG, 1244 ECORE_Q_UPDATE_PTP_PKTS, 1245}; 1246 1247/* Allowed Queue states */ 1248enum ecore_q_state { 1249 ECORE_Q_STATE_RESET, 1250 ECORE_Q_STATE_INITIALIZED, 1251 ECORE_Q_STATE_ACTIVE, 1252 ECORE_Q_STATE_MULTI_COS, 1253 ECORE_Q_STATE_MCOS_TERMINATED, 1254 ECORE_Q_STATE_INACTIVE, 1255 ECORE_Q_STATE_STOPPED, 1256 ECORE_Q_STATE_TERMINATED, 1257 ECORE_Q_STATE_FLRED, 1258 ECORE_Q_STATE_MAX, 1259}; 1260 1261/* Allowed Queue states */ 1262enum ecore_q_logical_state { 1263 ECORE_Q_LOGICAL_STATE_ACTIVE, 1264 ECORE_Q_LOGICAL_STATE_STOPPED, 1265}; 1266 1267/* Allowed commands */ 1268enum ecore_queue_cmd { 1269 ECORE_Q_CMD_INIT, 1270 ECORE_Q_CMD_SETUP, 1271 ECORE_Q_CMD_SETUP_TX_ONLY, 1272 ECORE_Q_CMD_DEACTIVATE, 1273 ECORE_Q_CMD_ACTIVATE, 1274 ECORE_Q_CMD_UPDATE, 1275 ECORE_Q_CMD_UPDATE_TPA, 1276 ECORE_Q_CMD_HALT, 1277 ECORE_Q_CMD_CFC_DEL, 1278 ECORE_Q_CMD_TERMINATE, 1279 ECORE_Q_CMD_EMPTY, 1280 ECORE_Q_CMD_MAX, 1281}; 1282 1283/* queue SETUP + INIT flags */ 1284enum { 1285 ECORE_Q_FLG_TPA, 1286 ECORE_Q_FLG_TPA_IPV6, 1287 ECORE_Q_FLG_TPA_GRO, 1288 ECORE_Q_FLG_STATS, 1289 ECORE_Q_FLG_ZERO_STATS, 1290 ECORE_Q_FLG_ACTIVE, 1291 ECORE_Q_FLG_OV, 1292 ECORE_Q_FLG_VLAN, 1293 ECORE_Q_FLG_COS, 1294 ECORE_Q_FLG_HC, 1295 ECORE_Q_FLG_HC_EN, 1296 ECORE_Q_FLG_DHC, 1297 ECORE_Q_FLG_OOO, 1298 ECORE_Q_FLG_FCOE, 1299 ECORE_Q_FLG_LEADING_RSS, 1300 ECORE_Q_FLG_MCAST, 1301 ECORE_Q_FLG_DEF_VLAN, 1302 ECORE_Q_FLG_TX_SWITCH, 1303 ECORE_Q_FLG_TX_SEC, 1304 ECORE_Q_FLG_ANTI_SPOOF, 1305 ECORE_Q_FLG_SILENT_VLAN_REM, 1306 ECORE_Q_FLG_FORCE_DEFAULT_PRI, 1307 ECORE_Q_FLG_REFUSE_OUTBAND_VLAN, 1308 ECORE_Q_FLG_PCSUM_ON_PKT, 1309 ECORE_Q_FLG_TUN_INC_INNER_IP_ID 1310}; 1311 1312/* Queue type options: queue type may be a combination of below. */ 1313enum ecore_q_type { 1314 ECORE_Q_TYPE_FWD, 1315 /** TODO: Consider moving both these flags into the init() 1316 * ramrod params. 1317 */ 1318 ECORE_Q_TYPE_HAS_RX, 1319 ECORE_Q_TYPE_HAS_TX, 1320}; 1321 1322#define ECORE_PRIMARY_CID_INDEX 0 1323#define ECORE_MULTI_TX_COS_E1X 3 /* QM only */ 1324#define ECORE_MULTI_TX_COS_E2_E3A0 2 1325#define ECORE_MULTI_TX_COS_E3B0 3 1326#define ECORE_MULTI_TX_COS 3 /* Maximum possible */ 1327#define MAC_PAD (ECORE_ALIGN(ETH_ALEN, sizeof(uint32_t)) - ETH_ALEN) 1328/* DMAE channel to be used by FW for timesync workaroun. A driver that sends 1329 * timesync-related ramrods must not use this DMAE command ID. 1330 */ 1331#define FW_DMAE_CMD_ID 6 1332 1333struct ecore_queue_init_params { 1334 struct { 1335 unsigned long flags; 1336 uint16_t hc_rate; 1337 uint8_t fw_sb_id; 1338 uint8_t sb_cq_index; 1339 } tx; 1340 1341 struct { 1342 unsigned long flags; 1343 uint16_t hc_rate; 1344 uint8_t fw_sb_id; 1345 uint8_t sb_cq_index; 1346 } rx; 1347 1348 /* CID context in the host memory */ 1349 struct eth_context *cxts[ECORE_MULTI_TX_COS]; 1350 1351 /* maximum number of cos supported by hardware */ 1352 uint8_t max_cos; 1353}; 1354 1355struct ecore_queue_terminate_params { 1356 /* index within the tx_only cids of this queue object */ 1357 uint8_t cid_index; 1358}; 1359 1360struct ecore_queue_cfc_del_params { 1361 /* index within the tx_only cids of this queue object */ 1362 uint8_t cid_index; 1363}; 1364 1365struct ecore_queue_update_params { 1366 unsigned long update_flags; /* ECORE_Q_UPDATE_XX bits */ 1367 uint16_t def_vlan; 1368 uint16_t silent_removal_value; 1369 uint16_t silent_removal_mask; 1370/* index within the tx_only cids of this queue object */ 1371 uint8_t cid_index; 1372}; 1373 1374struct ecore_queue_update_tpa_params { 1375 ecore_dma_addr_t sge_map; 1376 uint8_t update_ipv4; 1377 uint8_t update_ipv6; 1378 uint8_t max_tpa_queues; 1379 uint8_t max_sges_pkt; 1380 uint8_t complete_on_both_clients; 1381 uint8_t dont_verify_thr; 1382 uint8_t tpa_mode; 1383 uint8_t _pad; 1384 1385 uint16_t sge_buff_sz; 1386 uint16_t max_agg_sz; 1387 1388 uint16_t sge_pause_thr_low; 1389 uint16_t sge_pause_thr_high; 1390}; 1391 1392struct rxq_pause_params { 1393 uint16_t bd_th_lo; 1394 uint16_t bd_th_hi; 1395 uint16_t rcq_th_lo; 1396 uint16_t rcq_th_hi; 1397 uint16_t sge_th_lo; /* valid iff ECORE_Q_FLG_TPA */ 1398 uint16_t sge_th_hi; /* valid iff ECORE_Q_FLG_TPA */ 1399 uint16_t pri_map; 1400}; 1401 1402/* general */ 1403struct ecore_general_setup_params { 1404 /* valid iff ECORE_Q_FLG_STATS */ 1405 uint8_t stat_id; 1406 1407 uint8_t spcl_id; 1408 uint16_t mtu; 1409 uint8_t cos; 1410 1411 uint8_t fp_hsi; 1412}; 1413 1414struct ecore_rxq_setup_params { 1415 /* dma */ 1416 ecore_dma_addr_t dscr_map; 1417 ecore_dma_addr_t sge_map; 1418 ecore_dma_addr_t rcq_map; 1419 ecore_dma_addr_t rcq_np_map; 1420 1421 uint16_t drop_flags; 1422 uint16_t buf_sz; 1423 uint8_t fw_sb_id; 1424 uint8_t cl_qzone_id; 1425 1426 /* valid iff ECORE_Q_FLG_TPA */ 1427 uint16_t tpa_agg_sz; 1428 uint16_t sge_buf_sz; 1429 uint8_t max_sges_pkt; 1430 uint8_t max_tpa_queues; 1431 uint8_t rss_engine_id; 1432 1433 /* valid iff ECORE_Q_FLG_MCAST */ 1434 uint8_t mcast_engine_id; 1435 1436 uint8_t cache_line_log; 1437 1438 uint8_t sb_cq_index; 1439 1440 /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */ 1441 uint16_t silent_removal_value; 1442 uint16_t silent_removal_mask; 1443}; 1444 1445struct ecore_txq_setup_params { 1446 /* dma */ 1447 ecore_dma_addr_t dscr_map; 1448 1449 uint8_t fw_sb_id; 1450 uint8_t sb_cq_index; 1451 uint8_t cos; /* valid iff ECORE_Q_FLG_COS */ 1452 uint16_t traffic_type; 1453 /* equals to the leading rss client id, used for TX classification*/ 1454 uint8_t tss_leading_cl_id; 1455 1456 /* valid iff ECORE_Q_FLG_DEF_VLAN */ 1457 uint16_t default_vlan; 1458}; 1459 1460struct ecore_queue_setup_params { 1461 struct ecore_general_setup_params gen_params; 1462 struct ecore_txq_setup_params txq_params; 1463 struct ecore_rxq_setup_params rxq_params; 1464 struct rxq_pause_params pause_params; 1465 unsigned long flags; 1466}; 1467 1468struct ecore_queue_setup_tx_only_params { 1469 struct ecore_general_setup_params gen_params; 1470 struct ecore_txq_setup_params txq_params; 1471 unsigned long flags; 1472 /* index within the tx_only cids of this queue object */ 1473 uint8_t cid_index; 1474}; 1475 1476struct ecore_queue_state_params { 1477 struct ecore_queue_sp_obj *q_obj; 1478 1479 /* Current command */ 1480 enum ecore_queue_cmd cmd; 1481 1482 /* may have RAMROD_COMP_WAIT set only */ 1483 unsigned long ramrod_flags; 1484 1485 /* Params according to the current command */ 1486 union { 1487 struct ecore_queue_update_params update; 1488 struct ecore_queue_update_tpa_params update_tpa; 1489 struct ecore_queue_setup_params setup; 1490 struct ecore_queue_init_params init; 1491 struct ecore_queue_setup_tx_only_params tx_only; 1492 struct ecore_queue_terminate_params terminate; 1493 struct ecore_queue_cfc_del_params cfc_del; 1494 } params; 1495}; 1496 1497struct ecore_viflist_params { 1498 uint8_t echo_res; 1499 uint8_t func_bit_map_res; 1500}; 1501 1502struct ecore_queue_sp_obj { 1503 uint32_t cids[ECORE_MULTI_TX_COS]; 1504 uint8_t cl_id; 1505 uint8_t func_id; 1506 1507 /* number of traffic classes supported by queue. 1508 * The primary connection of the queue supports the first traffic 1509 * class. Any further traffic class is supported by a tx-only 1510 * connection. 1511 * 1512 * Therefore max_cos is also a number of valid entries in the cids 1513 * array. 1514 */ 1515 uint8_t max_cos; 1516 uint8_t num_tx_only, next_tx_only; 1517 1518 enum ecore_q_state state, next_state; 1519 1520 /* bits from enum ecore_q_type */ 1521 unsigned long type; 1522 1523 /* ECORE_Q_CMD_XX bits. This object implements "one 1524 * pending" paradigm but for debug and tracing purposes it's 1525 * more convenient to have different bits for different 1526 * commands. 1527 */ 1528 unsigned long pending; 1529 1530 /* Buffer to use as a ramrod data and its mapping */ 1531 void *rdata; 1532 ecore_dma_addr_t rdata_mapping; 1533 1534 /** 1535 * Performs one state change according to the given parameters. 1536 * 1537 * @return 0 in case of success and negative value otherwise. 1538 */ 1539 int (*send_cmd)(struct bxe_softc *sc, 1540 struct ecore_queue_state_params *params); 1541 1542 /** 1543 * Sets the pending bit according to the requested transition. 1544 */ 1545 int (*set_pending)(struct ecore_queue_sp_obj *o, 1546 struct ecore_queue_state_params *params); 1547 1548 /** 1549 * Checks that the requested state transition is legal. 1550 */ 1551 int (*check_transition)(struct bxe_softc *sc, 1552 struct ecore_queue_sp_obj *o, 1553 struct ecore_queue_state_params *params); 1554 1555 /** 1556 * Completes the pending command. 1557 */ 1558 int (*complete_cmd)(struct bxe_softc *sc, 1559 struct ecore_queue_sp_obj *o, 1560 enum ecore_queue_cmd); 1561 1562 int (*wait_comp)(struct bxe_softc *sc, 1563 struct ecore_queue_sp_obj *o, 1564 enum ecore_queue_cmd cmd); 1565}; 1566 1567/********************** Function state update *********************************/ 1568 1569/* UPDATE command options */ 1570enum { 1571 ECORE_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, 1572 ECORE_F_UPDATE_TX_SWITCH_SUSPEND, 1573 ECORE_F_UPDATE_SD_VLAN_TAG_CHNG, 1574 ECORE_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG, 1575 ECORE_F_UPDATE_VLAN_FORCE_PRIO_CHNG, 1576 ECORE_F_UPDATE_VLAN_FORCE_PRIO_FLAG, 1577 ECORE_F_UPDATE_TUNNEL_CFG_CHNG, 1578 ECORE_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE, 1579 ECORE_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN, 1580 ECORE_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE, 1581 ECORE_F_UPDATE_TUNNEL_INNER_RSS, 1582}; 1583 1584/* Allowed Function states */ 1585enum ecore_func_state { 1586 ECORE_F_STATE_RESET, 1587 ECORE_F_STATE_INITIALIZED, 1588 ECORE_F_STATE_STARTED, 1589 ECORE_F_STATE_TX_STOPPED, 1590 ECORE_F_STATE_MAX, 1591}; 1592 1593/* Allowed Function commands */ 1594enum ecore_func_cmd { 1595 ECORE_F_CMD_HW_INIT, 1596 ECORE_F_CMD_START, 1597 ECORE_F_CMD_STOP, 1598 ECORE_F_CMD_HW_RESET, 1599 ECORE_F_CMD_AFEX_UPDATE, 1600 ECORE_F_CMD_AFEX_VIFLISTS, 1601 ECORE_F_CMD_TX_STOP, 1602 ECORE_F_CMD_TX_START, 1603 ECORE_F_CMD_SWITCH_UPDATE, 1604 ECORE_F_CMD_SET_TIMESYNC, 1605 ECORE_F_CMD_MAX, 1606}; 1607 1608struct ecore_func_hw_init_params { 1609 /* A load phase returned by MCP. 1610 * 1611 * May be: 1612 * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP 1613 * FW_MSG_CODE_DRV_LOAD_COMMON 1614 * FW_MSG_CODE_DRV_LOAD_PORT 1615 * FW_MSG_CODE_DRV_LOAD_FUNCTION 1616 */ 1617 uint32_t load_phase; 1618}; 1619 1620struct ecore_func_hw_reset_params { 1621 /* A load phase returned by MCP. 1622 * 1623 * May be: 1624 * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP 1625 * FW_MSG_CODE_DRV_LOAD_COMMON 1626 * FW_MSG_CODE_DRV_LOAD_PORT 1627 * FW_MSG_CODE_DRV_LOAD_FUNCTION 1628 */ 1629 uint32_t reset_phase; 1630}; 1631 1632struct ecore_func_start_params { 1633 /* Multi Function mode: 1634 * - Single Function 1635 * - Switch Dependent 1636 * - Switch Independent 1637 */ 1638 uint16_t mf_mode; 1639 1640 /* Switch Dependent mode outer VLAN tag */ 1641 uint16_t sd_vlan_tag; 1642 1643 /* Function cos mode */ 1644 uint8_t network_cos_mode; 1645 1646 /* UDP dest port for VXLAN */ 1647 uint16_t vxlan_dst_port; 1648 1649 /* UDP dest port for Geneve */ 1650 uint16_t geneve_dst_port; 1651 1652 /* Enable inner Rx classifications for L2GRE packets */ 1653 uint8_t inner_clss_l2gre; 1654 1655 /* Enable inner Rx classifications for L2-Geneve packets */ 1656 uint8_t inner_clss_l2geneve; 1657 1658 /* Enable inner Rx classification for vxlan packets */ 1659 uint8_t inner_clss_vxlan; 1660 1661 /* Enable RSS according to inner header */ 1662 uint8_t inner_rss; 1663 1664 /** Allows accepting of packets failing MF classification, possibly 1665 * only matching a given ethertype 1666 */ 1667 uint8_t class_fail; 1668 uint16_t class_fail_ethtype; 1669 1670 /* Override priority of output packets */ 1671 uint8_t sd_vlan_force_pri; 1672 uint8_t sd_vlan_force_pri_val; 1673 1674 /* Replace vlan's ethertype */ 1675 uint16_t sd_vlan_eth_type; 1676 1677 /* Prevent inner vlans from being added by FW */ 1678 uint8_t no_added_tags; 1679 1680 /* Inner-to-Outer vlan priority mapping */ 1681 uint8_t c2s_pri[MAX_VLAN_PRIORITIES]; 1682 uint8_t c2s_pri_default; 1683 uint8_t c2s_pri_valid; 1684}; 1685 1686struct ecore_func_switch_update_params { 1687 unsigned long changes; /* ECORE_F_UPDATE_XX bits */ 1688 uint16_t vlan; 1689 uint16_t vlan_eth_type; 1690 uint8_t vlan_force_prio; 1691 uint16_t vxlan_dst_port; 1692 uint16_t geneve_dst_port; 1693}; 1694 1695struct ecore_func_afex_update_params { 1696 uint16_t vif_id; 1697 uint16_t afex_default_vlan; 1698 uint8_t allowed_priorities; 1699}; 1700 1701struct ecore_func_afex_viflists_params { 1702 uint16_t vif_list_index; 1703 uint8_t func_bit_map; 1704 uint8_t afex_vif_list_command; 1705 uint8_t func_to_clear; 1706}; 1707 1708struct ecore_func_tx_start_params { 1709 struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES]; 1710 uint8_t dcb_enabled; 1711 uint8_t dcb_version; 1712 uint8_t dont_add_pri_0; 1713 uint8_t dcb_outer_pri[MAX_TRAFFIC_TYPES]; 1714}; 1715 1716struct ecore_func_set_timesync_params { 1717 /* Reset, set or keep the current drift value */ 1718 uint8_t drift_adjust_cmd; 1719 /* Dec, inc or keep the current offset */ 1720 uint8_t offset_cmd; 1721 /* Drift value direction */ 1722 uint8_t add_sub_drift_adjust_value; 1723 /* Drift, period and offset values to be used according to the commands 1724 * above. 1725 */ 1726 uint8_t drift_adjust_value; 1727 uint32_t drift_adjust_period; 1728 uint64_t offset_delta; 1729}; 1730 1731struct ecore_func_state_params { 1732 struct ecore_func_sp_obj *f_obj; 1733 1734 /* Current command */ 1735 enum ecore_func_cmd cmd; 1736 1737 /* may have RAMROD_COMP_WAIT set only */ 1738 unsigned long ramrod_flags; 1739 1740 /* Params according to the current command */ 1741 union { 1742 struct ecore_func_hw_init_params hw_init; 1743 struct ecore_func_hw_reset_params hw_reset; 1744 struct ecore_func_start_params start; 1745 struct ecore_func_switch_update_params switch_update; 1746 struct ecore_func_afex_update_params afex_update; 1747 struct ecore_func_afex_viflists_params afex_viflists; 1748 struct ecore_func_tx_start_params tx_start; 1749 struct ecore_func_set_timesync_params set_timesync; 1750 } params; 1751}; 1752 1753struct ecore_func_sp_drv_ops { 1754 /* Init tool + runtime initialization: 1755 * - Common Chip 1756 * - Common (per Path) 1757 * - Port 1758 * - Function phases 1759 */ 1760 int (*init_hw_cmn_chip)(struct bxe_softc *sc); 1761 int (*init_hw_cmn)(struct bxe_softc *sc); 1762 int (*init_hw_port)(struct bxe_softc *sc); 1763 int (*init_hw_func)(struct bxe_softc *sc); 1764 1765 /* Reset Function HW: Common, Port, Function phases. */ 1766 void (*reset_hw_cmn)(struct bxe_softc *sc); 1767 void (*reset_hw_port)(struct bxe_softc *sc); 1768 void (*reset_hw_func)(struct bxe_softc *sc); 1769 1770 /* Init/Free GUNZIP resources */ 1771 int (*gunzip_init)(struct bxe_softc *sc); 1772 void (*gunzip_end)(struct bxe_softc *sc); 1773 1774 /* Prepare/Release FW resources */ 1775 int (*init_fw)(struct bxe_softc *sc); 1776 void (*release_fw)(struct bxe_softc *sc); 1777}; 1778 1779struct ecore_func_sp_obj { 1780 enum ecore_func_state state, next_state; 1781 1782 /* ECORE_FUNC_CMD_XX bits. This object implements "one 1783 * pending" paradigm but for debug and tracing purposes it's 1784 * more convenient to have different bits for different 1785 * commands. 1786 */ 1787 unsigned long pending; 1788 1789 /* Buffer to use as a ramrod data and its mapping */ 1790 void *rdata; 1791 ecore_dma_addr_t rdata_mapping; 1792 1793 /* Buffer to use as a afex ramrod data and its mapping. 1794 * This can't be same rdata as above because afex ramrod requests 1795 * can arrive to the object in parallel to other ramrod requests. 1796 */ 1797 void *afex_rdata; 1798 ecore_dma_addr_t afex_rdata_mapping; 1799 1800 /* this mutex validates that when pending flag is taken, the next 1801 * ramrod to be sent will be the one set the pending bit 1802 */ 1803 ECORE_MUTEX one_pending_mutex; 1804 1805 /* Driver interface */ 1806 struct ecore_func_sp_drv_ops *drv; 1807 1808 /** 1809 * Performs one state change according to the given parameters. 1810 * 1811 * @return 0 in case of success and negative value otherwise. 1812 */ 1813 int (*send_cmd)(struct bxe_softc *sc, 1814 struct ecore_func_state_params *params); 1815 1816 /** 1817 * Checks that the requested state transition is legal. 1818 */ 1819 int (*check_transition)(struct bxe_softc *sc, 1820 struct ecore_func_sp_obj *o, 1821 struct ecore_func_state_params *params); 1822 1823 /** 1824 * Completes the pending command. 1825 */ 1826 int (*complete_cmd)(struct bxe_softc *sc, 1827 struct ecore_func_sp_obj *o, 1828 enum ecore_func_cmd cmd); 1829 1830 int (*wait_comp)(struct bxe_softc *sc, struct ecore_func_sp_obj *o, 1831 enum ecore_func_cmd cmd); 1832}; 1833 1834/********************** Interfaces ********************************************/ 1835/* Queueable objects set */ 1836union ecore_qable_obj { 1837 struct ecore_vlan_mac_obj vlan_mac; 1838}; 1839/************** Function state update *********/ 1840void ecore_init_func_obj(struct bxe_softc *sc, 1841 struct ecore_func_sp_obj *obj, 1842 void *rdata, ecore_dma_addr_t rdata_mapping, 1843 void *afex_rdata, ecore_dma_addr_t afex_rdata_mapping, 1844 struct ecore_func_sp_drv_ops *drv_iface); 1845 1846int ecore_func_state_change(struct bxe_softc *sc, 1847 struct ecore_func_state_params *params); 1848 1849enum ecore_func_state ecore_func_get_state(struct bxe_softc *sc, 1850 struct ecore_func_sp_obj *o); 1851/******************* Queue State **************/ 1852void ecore_init_queue_obj(struct bxe_softc *sc, 1853 struct ecore_queue_sp_obj *obj, uint8_t cl_id, uint32_t *cids, 1854 uint8_t cid_cnt, uint8_t func_id, void *rdata, 1855 ecore_dma_addr_t rdata_mapping, unsigned long type); 1856 1857int ecore_queue_state_change(struct bxe_softc *sc, 1858 struct ecore_queue_state_params *params); 1859 1860int ecore_get_q_logical_state(struct bxe_softc *sc, 1861 struct ecore_queue_sp_obj *obj); 1862 1863/********************* VLAN-MAC ****************/ 1864void ecore_init_mac_obj(struct bxe_softc *sc, 1865 struct ecore_vlan_mac_obj *mac_obj, 1866 uint8_t cl_id, uint32_t cid, uint8_t func_id, void *rdata, 1867 ecore_dma_addr_t rdata_mapping, int state, 1868 unsigned long *pstate, ecore_obj_type type, 1869 struct ecore_credit_pool_obj *macs_pool); 1870 1871void ecore_init_vlan_obj(struct bxe_softc *sc, 1872 struct ecore_vlan_mac_obj *vlan_obj, 1873 uint8_t cl_id, uint32_t cid, uint8_t func_id, void *rdata, 1874 ecore_dma_addr_t rdata_mapping, int state, 1875 unsigned long *pstate, ecore_obj_type type, 1876 struct ecore_credit_pool_obj *vlans_pool); 1877 1878void ecore_init_vlan_mac_obj(struct bxe_softc *sc, 1879 struct ecore_vlan_mac_obj *vlan_mac_obj, 1880 uint8_t cl_id, uint32_t cid, uint8_t func_id, void *rdata, 1881 ecore_dma_addr_t rdata_mapping, int state, 1882 unsigned long *pstate, ecore_obj_type type, 1883 struct ecore_credit_pool_obj *macs_pool, 1884 struct ecore_credit_pool_obj *vlans_pool); 1885 1886void ecore_init_vxlan_fltr_obj(struct bxe_softc *sc, 1887 struct ecore_vlan_mac_obj *vlan_mac_obj, 1888 uint8_t cl_id, uint32_t cid, uint8_t func_id, void *rdata, 1889 ecore_dma_addr_t rdata_mapping, int state, 1890 unsigned long *pstate, ecore_obj_type type, 1891 struct ecore_credit_pool_obj *macs_pool, 1892 struct ecore_credit_pool_obj *vlans_pool); 1893 1894int ecore_vlan_mac_h_read_lock(struct bxe_softc *sc, 1895 struct ecore_vlan_mac_obj *o); 1896void ecore_vlan_mac_h_read_unlock(struct bxe_softc *sc, 1897 struct ecore_vlan_mac_obj *o); 1898int ecore_vlan_mac_h_write_lock(struct bxe_softc *sc, 1899 struct ecore_vlan_mac_obj *o); 1900void ecore_vlan_mac_h_write_unlock(struct bxe_softc *sc, 1901 struct ecore_vlan_mac_obj *o); 1902int ecore_config_vlan_mac(struct bxe_softc *sc, 1903 struct ecore_vlan_mac_ramrod_params *p); 1904 1905int ecore_vlan_mac_move(struct bxe_softc *sc, 1906 struct ecore_vlan_mac_ramrod_params *p, 1907 struct ecore_vlan_mac_obj *dest_o); 1908 1909/********************* RX MODE ****************/ 1910 1911void ecore_init_rx_mode_obj(struct bxe_softc *sc, 1912 struct ecore_rx_mode_obj *o); 1913 1914/** 1915 * ecore_config_rx_mode - Send and RX_MODE ramrod according to the provided parameters. 1916 * 1917 * @p: Command parameters 1918 * 1919 * Return: 0 - if operation was successful and there is no pending completions, 1920 * positive number - if there are pending completions, 1921 * negative - if there were errors 1922 */ 1923int ecore_config_rx_mode(struct bxe_softc *sc, 1924 struct ecore_rx_mode_ramrod_params *p); 1925 1926/****************** MULTICASTS ****************/ 1927 1928void ecore_init_mcast_obj(struct bxe_softc *sc, 1929 struct ecore_mcast_obj *mcast_obj, 1930 uint8_t mcast_cl_id, uint32_t mcast_cid, uint8_t func_id, 1931 uint8_t engine_id, void *rdata, ecore_dma_addr_t rdata_mapping, 1932 int state, unsigned long *pstate, 1933 ecore_obj_type type); 1934 1935/** 1936 * ecore_config_mcast - Configure multicast MACs list. 1937 * 1938 * @cmd: command to execute: BNX2X_MCAST_CMD_X 1939 * 1940 * May configure a new list 1941 * provided in p->mcast_list (ECORE_MCAST_CMD_ADD), clean up 1942 * (ECORE_MCAST_CMD_DEL) or restore (ECORE_MCAST_CMD_RESTORE) a current 1943 * configuration, continue to execute the pending commands 1944 * (ECORE_MCAST_CMD_CONT). 1945 * 1946 * If previous command is still pending or if number of MACs to 1947 * configure is more that maximum number of MACs in one command, 1948 * the current command will be enqueued to the tail of the 1949 * pending commands list. 1950 * 1951 * Return: 0 is operation was successful and there are no pending completions, 1952 * negative if there were errors, positive if there are pending 1953 * completions. 1954 */ 1955int ecore_config_mcast(struct bxe_softc *sc, 1956 struct ecore_mcast_ramrod_params *p, 1957 enum ecore_mcast_cmd cmd); 1958 1959/****************** CREDIT POOL ****************/ 1960void ecore_init_mac_credit_pool(struct bxe_softc *sc, 1961 struct ecore_credit_pool_obj *p, uint8_t func_id, 1962 uint8_t func_num); 1963void ecore_init_vlan_credit_pool(struct bxe_softc *sc, 1964 struct ecore_credit_pool_obj *p, uint8_t func_id, 1965 uint8_t func_num); 1966void ecore_init_credit_pool(struct ecore_credit_pool_obj *p, 1967 int base, int credit); 1968 1969/****************** RSS CONFIGURATION ****************/ 1970void ecore_init_rss_config_obj(struct bxe_softc *sc, 1971 struct ecore_rss_config_obj *rss_obj, 1972 uint8_t cl_id, uint32_t cid, uint8_t func_id, uint8_t engine_id, 1973 void *rdata, ecore_dma_addr_t rdata_mapping, 1974 int state, unsigned long *pstate, 1975 ecore_obj_type type); 1976 1977/** 1978 * ecore_config_rss - Updates RSS configuration according to provided parameters 1979 * 1980 * Return: 0 in case of success 1981 */ 1982int ecore_config_rss(struct bxe_softc *sc, 1983 struct ecore_config_rss_params *p); 1984 1985/** 1986 * ecore_get_rss_ind_table - Return the current ind_table configuration. 1987 * 1988 * @ind_table: buffer to fill with the current indirection 1989 * table content. Should be at least 1990 * T_ETH_INDIRECTION_TABLE_SIZE bytes long. 1991 */ 1992void ecore_get_rss_ind_table(struct ecore_rss_config_obj *rss_obj, 1993 uint8_t *ind_table); 1994 1995#define PF_MAC_CREDIT_E2(sc, func_num) \ 1996 ((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(sc) * VF_MAC_CREDIT_CNT) / \ 1997 func_num + GET_NUM_VFS_PER_PF(sc) * VF_MAC_CREDIT_CNT) 1998 1999#define PF_VLAN_CREDIT_E2(sc, func_num) \ 2000 ((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(sc) * VF_VLAN_CREDIT_CNT) / \ 2001 func_num + GET_NUM_VFS_PER_PF(sc) * VF_VLAN_CREDIT_CNT) 2002 2003 2004#endif /* ECORE_SP_H */ 2005 2006