1/*- 2 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. Neither the name of the author nor the names of any co-contributors 13 * may be used to endorse or promote products derived from this software 14 * without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD 29 * 30 * $FreeBSD$ 31 */ 32 33/* 34 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 35 * 36 * 37 * Name: mpi2_targ.h 38 * Title: MPI Target mode messages and structures 39 * Creation Date: September 8, 2006 40 * 41 * mpi2_targ.h Version: 02.00.09 42 * 43 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 44 * prefix are for use only on MPI v2.5 products, and must not be used 45 * with MPI v2.0 products. Unless otherwise noted, names beginning with 46 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 47 * 48 * Version History 49 * --------------- 50 * 51 * Date Version Description 52 * -------- -------- ------------------------------------------------------ 53 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 54 * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to 55 * BufferPostFlags field of CommandBufferPostBase Request. 56 * 02-29-08 02.00.02 Modified various names to make them 32-character unique. 57 * 10-02-08 02.00.03 Removed NextCmdBufferOffset from 58 * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. 59 * Target Status Send Request only takes a single SGE for 60 * response data. 61 * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure. 62 * 11-18-11 02.00.05 Incorporating additions for MPI v2.5. 63 * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT 64 * request message structure. 65 * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and 66 * MPI2_TARGET_MODE_ABORT_ALL_COMMANDS. 67 * 06-13-14 02.00.07 Added MinMSIxIndex and MaxMSIxIndex fields to 68 * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. 69 * 11-18-14 02.00.08 Updated copyright information. 70 * 03-16-15 02.00.09 Updated for MPI v2.6. 71 * Added MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH. 72 * -------------------------------------------------------------------------- 73 */ 74 75#ifndef MPI2_TARG_H 76#define MPI2_TARG_H 77 78 79/****************************************************************************** 80* 81* SCSI Target Messages 82* 83*******************************************************************************/ 84 85/**************************************************************************** 86* Target Command Buffer Post Base Request 87****************************************************************************/ 88 89typedef struct _MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST 90{ 91 U8 BufferPostFlags; /* 0x00 */ 92 U8 Reserved1; /* 0x01 */ 93 U8 ChainOffset; /* 0x02 */ 94 U8 Function; /* 0x03 */ 95 U16 TotalCmdBuffers; /* 0x04 */ 96 U8 Reserved; /* 0x06 */ 97 U8 MsgFlags; /* 0x07 */ 98 U8 VP_ID; /* 0x08 */ 99 U8 VF_ID; /* 0x09 */ 100 U16 Reserved2; /* 0x0A */ 101 U32 Reserved3; /* 0x0C */ 102 U16 CmdBufferLength; /* 0x10 */ 103 U8 MinMSIxIndex; /* 0x12 */ /* MPI 2.5 and newer only; Reserved in MPI 2.0 */ 104 U8 MaxMSIxIndex; /* 0x13 */ /* MPI 2.5 and newer only; Reserved in MPI 2.0 */ 105 U32 BaseAddressLow; /* 0x14 */ 106 U32 BaseAddressHigh; /* 0x18 */ 107} MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST, 108 MPI2_POINTER PTR_MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST, 109 Mpi2TargetCmdBufferPostBaseRequest_t, 110 MPI2_POINTER pMpi2TargetCmdBufferPostBaseRequest_t; 111 112/* values for the BufferPostflags field */ 113#define MPI2_CMD_BUF_POST_BASE_ADDRESS_SPACE_MASK (0x0C) 114#define MPI2_CMD_BUF_POST_BASE_SYSTEM_ADDRESS_SPACE (0x00) 115#define MPI2_CMD_BUF_POST_BASE_IOCDDR_ADDRESS_SPACE (0x04) 116#define MPI2_CMD_BUF_POST_BASE_IOCPLB_ADDRESS_SPACE (0x08) /* only for MPI v2.5 and earlier */ 117#define MPI26_CMD_BUF_POST_BASE_IOCCTL_ADDRESS_SPACE (0x08) /* for MPI v2.6 only */ 118#define MPI2_CMD_BUF_POST_BASE_IOCPLBNTA_ADDRESS_SPACE (0x0C) /* only for MPI v2.5 and earlier */ 119 120#define MPI2_CMD_BUF_POST_BASE_FLAGS_AUTO_POST_ALL (0x01) 121 122 123/**************************************************************************** 124* Target Command Buffer Post List Request 125****************************************************************************/ 126 127typedef struct _MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST 128{ 129 U16 Reserved; /* 0x00 */ 130 U8 ChainOffset; /* 0x02 */ 131 U8 Function; /* 0x03 */ 132 U16 CmdBufferCount; /* 0x04 */ 133 U8 Reserved1; /* 0x06 */ 134 U8 MsgFlags; /* 0x07 */ 135 U8 VP_ID; /* 0x08 */ 136 U8 VF_ID; /* 0x09 */ 137 U16 Reserved2; /* 0x0A */ 138 U32 Reserved3; /* 0x0C */ 139 U16 IoIndex[2]; /* 0x10 */ 140} MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST, 141 MPI2_POINTER PTR_MPI2_TARGET_CMD_BUF_POST_LIST_REQUEST, 142 Mpi2TargetCmdBufferPostListRequest_t, 143 MPI2_POINTER pMpi2TargetCmdBufferPostListRequest_t; 144 145/**************************************************************************** 146* Target Command Buffer Post Base List Reply 147****************************************************************************/ 148 149typedef struct _MPI2_TARGET_BUF_POST_BASE_LIST_REPLY 150{ 151 U8 Flags; /* 0x00 */ 152 U8 Reserved; /* 0x01 */ 153 U8 MsgLength; /* 0x02 */ 154 U8 Function; /* 0x03 */ 155 U16 Reserved1; /* 0x04 */ 156 U8 Reserved2; /* 0x06 */ 157 U8 MsgFlags; /* 0x07 */ 158 U8 VP_ID; /* 0x08 */ 159 U8 VF_ID; /* 0x09 */ 160 U16 Reserved3; /* 0x0A */ 161 U16 Reserved4; /* 0x0C */ 162 U16 IOCStatus; /* 0x0E */ 163 U32 IOCLogInfo; /* 0x10 */ 164 U16 IoIndex; /* 0x14 */ 165 U16 Reserved5; /* 0x16 */ 166 U32 Reserved6; /* 0x18 */ 167} MPI2_TARGET_BUF_POST_BASE_LIST_REPLY, 168 MPI2_POINTER PTR_MPI2_TARGET_BUF_POST_BASE_LIST_REPLY, 169 Mpi2TargetCmdBufferPostBaseListReply_t, 170 MPI2_POINTER pMpi2TargetCmdBufferPostBaseListReply_t; 171 172/* Flags defines */ 173#define MPI2_CMD_BUF_POST_REPLY_IOINDEX_VALID (0x01) 174 175 176/**************************************************************************** 177* Command Buffer Formats (with 16 byte CDB) 178****************************************************************************/ 179 180typedef struct _MPI2_TARGET_SSP_CMD_BUFFER 181{ 182 U8 FrameType; /* 0x00 */ 183 U8 Reserved1; /* 0x01 */ 184 U16 InitiatorConnectionTag; /* 0x02 */ 185 U32 HashedSourceSASAddress; /* 0x04 */ 186 U16 Reserved2; /* 0x08 */ 187 U16 Flags; /* 0x0A */ 188 U32 Reserved3; /* 0x0C */ 189 U16 Tag; /* 0x10 */ 190 U16 TargetPortTransferTag; /* 0x12 */ 191 U32 DataOffset; /* 0x14 */ 192 /* COMMAND information unit starts here */ 193 U8 LogicalUnitNumber[8]; /* 0x18 */ 194 U8 Reserved4; /* 0x20 */ 195 U8 TaskAttribute; /* lower 3 bits */ /* 0x21 */ 196 U8 Reserved5; /* 0x22 */ 197 U8 AdditionalCDBLength; /* upper 5 bits */ /* 0x23 */ 198 U8 CDB[16]; /* 0x24 */ 199 /* Additional CDB bytes extend past the CDB field */ 200} MPI2_TARGET_SSP_CMD_BUFFER, MPI2_POINTER PTR_MPI2_TARGET_SSP_CMD_BUFFER, 201 Mpi2TargetSspCmdBuffer, MPI2_POINTER pMp2iTargetSspCmdBuffer; 202 203typedef struct _MPI2_TARGET_SSP_TASK_BUFFER 204{ 205 U8 FrameType; /* 0x00 */ 206 U8 Reserved1; /* 0x01 */ 207 U16 InitiatorConnectionTag; /* 0x02 */ 208 U32 HashedSourceSASAddress; /* 0x04 */ 209 U16 Reserved2; /* 0x08 */ 210 U16 Flags; /* 0x0A */ 211 U32 Reserved3; /* 0x0C */ 212 U16 Tag; /* 0x10 */ 213 U16 TargetPortTransferTag; /* 0x12 */ 214 U32 DataOffset; /* 0x14 */ 215 /* TASK information unit starts here */ 216 U8 LogicalUnitNumber[8]; /* 0x18 */ 217 U16 Reserved4; /* 0x20 */ 218 U8 TaskManagementFunction; /* 0x22 */ 219 U8 Reserved5; /* 0x23 */ 220 U16 ManagedTaskTag; /* 0x24 */ 221 U16 Reserved6; /* 0x26 */ 222 U32 Reserved7; /* 0x28 */ 223 U32 Reserved8; /* 0x2C */ 224 U32 Reserved9; /* 0x30 */ 225} MPI2_TARGET_SSP_TASK_BUFFER, MPI2_POINTER PTR_MPI2_TARGET_SSP_TASK_BUFFER, 226 Mpi2TargetSspTaskBuffer, MPI2_POINTER pMpi2TargetSspTaskBuffer; 227 228/* mask and shift for HashedSourceSASAddress field */ 229#define MPI2_TARGET_HASHED_SAS_ADDRESS_MASK (0xFFFFFF00) 230#define MPI2_TARGET_HASHED_SAS_ADDRESS_SHIFT (8) 231 232 233/**************************************************************************** 234* MPI v2.0 Target Assist Request 235****************************************************************************/ 236 237typedef struct _MPI2_TARGET_ASSIST_REQUEST 238{ 239 U8 Reserved1; /* 0x00 */ 240 U8 TargetAssistFlags; /* 0x01 */ 241 U8 ChainOffset; /* 0x02 */ 242 U8 Function; /* 0x03 */ 243 U16 QueueTag; /* 0x04 */ 244 U8 Reserved2; /* 0x06 */ 245 U8 MsgFlags; /* 0x07 */ 246 U8 VP_ID; /* 0x08 */ 247 U8 VF_ID; /* 0x09 */ 248 U16 Reserved3; /* 0x0A */ 249 U16 IoIndex; /* 0x0C */ 250 U16 InitiatorConnectionTag; /* 0x0E */ 251 U16 SGLFlags; /* 0x10 */ 252 U8 SequenceNumber; /* 0x12 */ 253 U8 Reserved4; /* 0x13 */ 254 U8 SGLOffset0; /* 0x14 */ 255 U8 SGLOffset1; /* 0x15 */ 256 U8 SGLOffset2; /* 0x16 */ 257 U8 SGLOffset3; /* 0x17 */ 258 U32 SkipCount; /* 0x18 */ 259 U32 DataLength; /* 0x1C */ 260 U32 BidirectionalDataLength; /* 0x20 */ 261 U16 IoFlags; /* 0x24 */ 262 U16 EEDPFlags; /* 0x26 */ 263 U32 EEDPBlockSize; /* 0x28 */ 264 U32 SecondaryReferenceTag; /* 0x2C */ 265 U16 SecondaryApplicationTag; /* 0x30 */ 266 U16 ApplicationTagTranslationMask; /* 0x32 */ 267 U32 PrimaryReferenceTag; /* 0x34 */ 268 U16 PrimaryApplicationTag; /* 0x38 */ 269 U16 PrimaryApplicationTagMask; /* 0x3A */ 270 U32 RelativeOffset; /* 0x3C */ 271 U32 Reserved5; /* 0x40 */ 272 U32 Reserved6; /* 0x44 */ 273 U32 Reserved7; /* 0x48 */ 274 U32 Reserved8; /* 0x4C */ 275 MPI2_SGE_IO_UNION SGL[1]; /* 0x50 */ 276} MPI2_TARGET_ASSIST_REQUEST, MPI2_POINTER PTR_MPI2_TARGET_ASSIST_REQUEST, 277 Mpi2TargetAssistRequest_t, MPI2_POINTER pMpi2TargetAssistRequest_t; 278 279/* Target Assist TargetAssistFlags bits */ 280 281#define MPI2_TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) 282#define MPI2_TARGET_ASSIST_FLAGS_TLR (0x10) 283#define MPI2_TARGET_ASSIST_FLAGS_RETRANSMIT (0x04) 284#define MPI2_TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02) 285#define MPI2_TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01) 286 287/* Target Assist SGLFlags bits */ 288 289/* base values for Data Location Address Space */ 290#define MPI2_TARGET_ASSIST_SGLFLAGS_ADDR_MASK (0x0C) 291#define MPI2_TARGET_ASSIST_SGLFLAGS_SYSTEM_ADDR (0x00) 292#define MPI2_TARGET_ASSIST_SGLFLAGS_IOCDDR_ADDR (0x04) 293#define MPI2_TARGET_ASSIST_SGLFLAGS_IOCPLB_ADDR (0x08) 294#define MPI2_TARGET_ASSIST_SGLFLAGS_PLBNTA_ADDR (0x0C) 295 296/* base values for Type */ 297#define MPI2_TARGET_ASSIST_SGLFLAGS_TYPE_MASK (0x03) 298#define MPI2_TARGET_ASSIST_SGLFLAGS_MPI_TYPE (0x00) 299#define MPI2_TARGET_ASSIST_SGLFLAGS_32IEEE_TYPE (0x01) 300#define MPI2_TARGET_ASSIST_SGLFLAGS_64IEEE_TYPE (0x02) 301 302/* shift values for each sub-field */ 303#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL3_SHIFT (12) 304#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL2_SHIFT (8) 305#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL1_SHIFT (4) 306#define MPI2_TARGET_ASSIST_SGLFLAGS_SGL0_SHIFT (0) 307 308/* Target Assist IoFlags bits */ 309 310#define MPI2_TARGET_ASSIST_IOFLAGS_BIDIRECTIONAL (0x0800) 311#define MPI2_TARGET_ASSIST_IOFLAGS_MULTICAST (0x0400) 312#define MPI2_TARGET_ASSIST_IOFLAGS_RECEIVE_FIRST (0x0200) 313 314/* Target Assist EEDPFlags bits */ 315 316#define MPI2_TA_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 317#define MPI2_TA_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 318#define MPI2_TA_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 319#define MPI2_TA_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 320 321#define MPI2_TA_EEDPFLAGS_CHECK_REFTAG (0x0400) 322#define MPI2_TA_EEDPFLAGS_CHECK_APPTAG (0x0200) 323#define MPI2_TA_EEDPFLAGS_CHECK_GUARD (0x0100) 324 325#define MPI2_TA_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 326 327#define MPI2_TA_EEDPFLAGS_MASK_OP (0x0007) 328#define MPI2_TA_EEDPFLAGS_NOOP_OP (0x0000) 329#define MPI2_TA_EEDPFLAGS_CHECK_OP (0x0001) 330#define MPI2_TA_EEDPFLAGS_STRIP_OP (0x0002) 331#define MPI2_TA_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 332#define MPI2_TA_EEDPFLAGS_INSERT_OP (0x0004) 333#define MPI2_TA_EEDPFLAGS_REPLACE_OP (0x0006) 334#define MPI2_TA_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 335 336 337/**************************************************************************** 338* MPI v2.5 Target Assist Request 339****************************************************************************/ 340 341typedef struct _MPI25_TARGET_ASSIST_REQUEST 342{ 343 U8 Reserved1; /* 0x00 */ 344 U8 TargetAssistFlags; /* 0x01 */ 345 U8 ChainOffset; /* 0x02 */ 346 U8 Function; /* 0x03 */ 347 U16 QueueTag; /* 0x04 */ 348 U8 Reserved2; /* 0x06 */ 349 U8 MsgFlags; /* 0x07 */ 350 U8 VP_ID; /* 0x08 */ 351 U8 VF_ID; /* 0x09 */ 352 U16 Reserved3; /* 0x0A */ 353 U16 IoIndex; /* 0x0C */ 354 U16 InitiatorConnectionTag; /* 0x0E */ 355 U8 DMAFlags; /* 0x10 */ 356 U8 Reserved9; /* 0x11 */ 357 U8 SequenceNumber; /* 0x12 */ 358 U8 Reserved4; /* 0x13 */ 359 U8 SGLOffset0; /* 0x14 */ 360 U8 SGLOffset1; /* 0x15 */ 361 U8 SGLOffset2; /* 0x16 */ 362 U8 SGLOffset3; /* 0x17 */ 363 U32 SkipCount; /* 0x18 */ 364 U32 DataLength; /* 0x1C */ 365 U32 BidirectionalDataLength; /* 0x20 */ 366 U16 IoFlags; /* 0x24 */ 367 U16 EEDPFlags; /* 0x26 */ 368 U16 EEDPBlockSize; /* 0x28 */ 369 U16 Reserved10; /* 0x2A */ 370 U32 SecondaryReferenceTag; /* 0x2C */ 371 U16 SecondaryApplicationTag; /* 0x30 */ 372 U16 ApplicationTagTranslationMask; /* 0x32 */ 373 U32 PrimaryReferenceTag; /* 0x34 */ 374 U16 PrimaryApplicationTag; /* 0x38 */ 375 U16 PrimaryApplicationTagMask; /* 0x3A */ 376 U32 RelativeOffset; /* 0x3C */ 377 U32 Reserved5; /* 0x40 */ 378 U32 Reserved6; /* 0x44 */ 379 U32 Reserved7; /* 0x48 */ 380 U32 Reserved8; /* 0x4C */ 381 MPI25_SGE_IO_UNION SGL; /* 0x50 */ 382} MPI25_TARGET_ASSIST_REQUEST, MPI2_POINTER PTR_MPI25_TARGET_ASSIST_REQUEST, 383 Mpi25TargetAssistRequest_t, MPI2_POINTER pMpi25TargetAssistRequest_t; 384 385/* use MPI2_TARGET_ASSIST_FLAGS_ defines for the Flags field */ 386 387/* Defines for the DMAFlags field 388 * Each setting affects 4 SGLS, from SGL0 to SGL3. 389 * D = Data 390 * C = Cache DIF 391 * I = Interleaved 392 * H = Host DIF 393 */ 394#define MPI25_TA_DMAFLAGS_OP_MASK (0x0F) 395#define MPI25_TA_DMAFLAGS_OP_D_D_D_D (0x00) 396#define MPI25_TA_DMAFLAGS_OP_D_D_D_C (0x01) 397#define MPI25_TA_DMAFLAGS_OP_D_D_D_I (0x02) 398#define MPI25_TA_DMAFLAGS_OP_D_D_C_C (0x03) 399#define MPI25_TA_DMAFLAGS_OP_D_D_C_I (0x04) 400#define MPI25_TA_DMAFLAGS_OP_D_D_I_I (0x05) 401#define MPI25_TA_DMAFLAGS_OP_D_C_C_C (0x06) 402#define MPI25_TA_DMAFLAGS_OP_D_C_C_I (0x07) 403#define MPI25_TA_DMAFLAGS_OP_D_C_I_I (0x08) 404#define MPI25_TA_DMAFLAGS_OP_D_I_I_I (0x09) 405#define MPI25_TA_DMAFLAGS_OP_D_H_D_D (0x0A) 406#define MPI25_TA_DMAFLAGS_OP_D_H_D_C (0x0B) 407#define MPI25_TA_DMAFLAGS_OP_D_H_D_I (0x0C) 408#define MPI25_TA_DMAFLAGS_OP_D_H_C_C (0x0D) 409#define MPI25_TA_DMAFLAGS_OP_D_H_C_I (0x0E) 410#define MPI25_TA_DMAFLAGS_OP_D_H_I_I (0x0F) 411 412/* defines for the IoFlags field */ 413#define MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000) /* MPI v2.6 and later */ 414#define MPI25_TARGET_ASSIST_IOFLAGS_BIDIRECTIONAL (0x0800) 415#define MPI25_TARGET_ASSIST_IOFLAGS_RECEIVE_FIRST (0x0200) 416 417/* defines for the EEDPFlags field */ 418#define MPI25_TA_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 419#define MPI25_TA_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 420#define MPI25_TA_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 421#define MPI25_TA_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 422 423#define MPI25_TA_EEDPFLAGS_CHECK_REFTAG (0x0400) 424#define MPI25_TA_EEDPFLAGS_CHECK_APPTAG (0x0200) 425#define MPI25_TA_EEDPFLAGS_CHECK_GUARD (0x0100) 426 427#define MPI25_TA_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0) 428#define MPI25_TA_EEDPFLAGS_COMPATIBLE_MODE (0x0000) 429#define MPI25_TA_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040) 430#define MPI25_TA_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080) 431#define MPI25_TA_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0) 432 433#define MPI25_TA_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030) 434#define MPI25_TA_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000) 435#define MPI25_TA_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010) 436 437#define MPI25_TA_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 438 439#define MPI25_TA_EEDPFLAGS_MASK_OP (0x0007) 440#define MPI25_TA_EEDPFLAGS_NOOP_OP (0x0000) 441#define MPI25_TA_EEDPFLAGS_CHECK_OP (0x0001) 442#define MPI25_TA_EEDPFLAGS_STRIP_OP (0x0002) 443#define MPI25_TA_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 444#define MPI25_TA_EEDPFLAGS_INSERT_OP (0x0004) 445#define MPI25_TA_EEDPFLAGS_REPLACE_OP (0x0006) 446#define MPI25_TA_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 447 448 449/**************************************************************************** 450* Target Status Send Request 451****************************************************************************/ 452 453typedef struct _MPI2_TARGET_STATUS_SEND_REQUEST 454{ 455 U8 Reserved1; /* 0x00 */ 456 U8 StatusFlags; /* 0x01 */ 457 U8 ChainOffset; /* 0x02 */ 458 U8 Function; /* 0x03 */ 459 U16 QueueTag; /* 0x04 */ 460 U8 Reserved2; /* 0x06 */ 461 U8 MsgFlags; /* 0x07 */ 462 U8 VP_ID; /* 0x08 */ 463 U8 VF_ID; /* 0x09 */ 464 U16 Reserved3; /* 0x0A */ 465 U16 IoIndex; /* 0x0C */ 466 U16 InitiatorConnectionTag; /* 0x0E */ 467 U16 SGLFlags; /* 0x10 */ /* MPI v2.0 only. Reserved on MPI v2.5. */ 468 U16 Reserved4; /* 0x12 */ 469 U8 SGLOffset0; /* 0x14 */ 470 U8 Reserved5; /* 0x15 */ 471 U16 Reserved6; /* 0x16 */ 472 U32 Reserved7; /* 0x18 */ 473 U32 Reserved8; /* 0x1C */ 474 MPI2_SIMPLE_SGE_UNION StatusDataSGE; /* 0x20 */ /* MPI v2.5: This must be an IEEE Simple Element 64. */ 475} MPI2_TARGET_STATUS_SEND_REQUEST, 476 MPI2_POINTER PTR_MPI2_TARGET_STATUS_SEND_REQUEST, 477 Mpi2TargetStatusSendRequest_t, MPI2_POINTER pMpi2TargetStatusSendRequest_t; 478 479/* Target Status Send StatusFlags bits */ 480 481#define MPI2_TSS_FLAGS_REPOST_CMD_BUFFER (0x80) 482#define MPI2_TSS_FLAGS_RETRANSMIT (0x04) 483#define MPI2_TSS_FLAGS_AUTO_GOOD_STATUS (0x01) 484 485/* Target Status Send SGLFlags bits - MPI v2.0 only */ 486/* Data Location Address Space */ 487#define MPI2_TSS_SGLFLAGS_ADDR_MASK (0x0C) 488#define MPI2_TSS_SGLFLAGS_SYSTEM_ADDR (0x00) 489#define MPI2_TSS_SGLFLAGS_IOCDDR_ADDR (0x04) 490#define MPI2_TSS_SGLFLAGS_IOCPLB_ADDR (0x08) 491#define MPI2_TSS_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) 492/* Type */ 493#define MPI2_TSS_SGLFLAGS_TYPE_MASK (0x03) 494#define MPI2_TSS_SGLFLAGS_MPI_TYPE (0x00) 495#define MPI2_TSS_SGLFLAGS_IEEE32_TYPE (0x01) 496#define MPI2_TSS_SGLFLAGS_IEEE64_TYPE (0x02) 497 498 499 500/* 501 * NOTE: The SSP status IU is big-endian. When used on a little-endian system, 502 * this structure properly orders the bytes. 503 */ 504typedef struct _MPI2_TARGET_SSP_RSP_IU 505{ 506 U32 Reserved0[6]; /* reserved for SSP header */ /* 0x00 */ 507 508 /* start of RESPONSE information unit */ 509 U32 Reserved1; /* 0x18 */ 510 U32 Reserved2; /* 0x1C */ 511 U16 Reserved3; /* 0x20 */ 512 U8 DataPres; /* lower 2 bits */ /* 0x22 */ 513 U8 Status; /* 0x23 */ 514 U32 Reserved4; /* 0x24 */ 515 U32 SenseDataLength; /* 0x28 */ 516 U32 ResponseDataLength; /* 0x2C */ 517 518 /* start of Response or Sense Data (size may vary dynamically) */ 519 U8 ResponseSenseData[4]; /* 0x30 */ 520} MPI2_TARGET_SSP_RSP_IU, MPI2_POINTER PTR_MPI2_TARGET_SSP_RSP_IU, 521 Mpi2TargetSspRspIu_t, MPI2_POINTER pMpi2TargetSspRspIu_t; 522 523 524/**************************************************************************** 525* Target Standard Reply - used with Target Assist or Target Status Send 526****************************************************************************/ 527 528typedef struct _MPI2_TARGET_STANDARD_REPLY 529{ 530 U16 Reserved; /* 0x00 */ 531 U8 MsgLength; /* 0x02 */ 532 U8 Function; /* 0x03 */ 533 U16 Reserved1; /* 0x04 */ 534 U8 Reserved2; /* 0x06 */ 535 U8 MsgFlags; /* 0x07 */ 536 U8 VP_ID; /* 0x08 */ 537 U8 VF_ID; /* 0x09 */ 538 U16 Reserved3; /* 0x0A */ 539 U16 Reserved4; /* 0x0C */ 540 U16 IOCStatus; /* 0x0E */ 541 U32 IOCLogInfo; /* 0x10 */ 542 U16 IoIndex; /* 0x14 */ 543 U16 Reserved5; /* 0x16 */ 544 U32 TransferCount; /* 0x18 */ 545 U32 BidirectionalTransferCount; /* 0x1C */ 546} MPI2_TARGET_STANDARD_REPLY, MPI2_POINTER PTR_MPI2_TARGET_STANDARD_REPLY, 547 Mpi2TargetErrorReply_t, MPI2_POINTER pMpi2TargetErrorReply_t; 548 549 550/**************************************************************************** 551* Target Mode Abort Request 552****************************************************************************/ 553 554typedef struct _MPI2_TARGET_MODE_ABORT_REQUEST 555{ 556 U8 AbortType; /* 0x00 */ 557 U8 Reserved1; /* 0x01 */ 558 U8 ChainOffset; /* 0x02 */ 559 U8 Function; /* 0x03 */ 560 U16 Reserved2; /* 0x04 */ 561 U8 Reserved3; /* 0x06 */ 562 U8 MsgFlags; /* 0x07 */ 563 U8 VP_ID; /* 0x08 */ 564 U8 VF_ID; /* 0x09 */ 565 U16 Reserved4; /* 0x0A */ 566 U16 IoIndexToAbort; /* 0x0C */ 567 U16 InitiatorDevHandle; /* 0x0E */ 568 U32 MidToAbort; /* 0x10 */ 569} MPI2_TARGET_MODE_ABORT, MPI2_POINTER PTR_MPI2_TARGET_MODE_ABORT, 570 Mpi2TargetModeAbort_t, MPI2_POINTER pMpi2TargetModeAbort_t; 571 572/* Target Mode Abort AbortType values */ 573 574#define MPI2_TARGET_MODE_ABORT_ALL_CMD_BUFFERS (0x00) 575#define MPI2_TARGET_MODE_ABORT_ALL_IO (0x01) 576#define MPI2_TARGET_MODE_ABORT_EXACT_IO (0x02) 577#define MPI2_TARGET_MODE_ABORT_EXACT_IO_REQUEST (0x03) 578#define MPI2_TARGET_MODE_ABORT_IO_REQUEST_AND_IO (0x04) 579#define MPI2_TARGET_MODE_ABORT_DEVHANDLE (0x05) 580#define MPI2_TARGET_MODE_ABORT_ALL_COMMANDS (0x06) 581 582 583/**************************************************************************** 584* Target Mode Abort Reply 585****************************************************************************/ 586 587typedef struct _MPI2_TARGET_MODE_ABORT_REPLY 588{ 589 U16 Reserved; /* 0x00 */ 590 U8 MsgLength; /* 0x02 */ 591 U8 Function; /* 0x03 */ 592 U16 Reserved1; /* 0x04 */ 593 U8 Reserved2; /* 0x06 */ 594 U8 MsgFlags; /* 0x07 */ 595 U8 VP_ID; /* 0x08 */ 596 U8 VF_ID; /* 0x09 */ 597 U16 Reserved3; /* 0x0A */ 598 U16 Reserved4; /* 0x0C */ 599 U16 IOCStatus; /* 0x0E */ 600 U32 IOCLogInfo; /* 0x10 */ 601 U32 AbortCount; /* 0x14 */ 602} MPI2_TARGET_MODE_ABORT_REPLY, MPI2_POINTER PTR_MPI2_TARGET_MODE_ABORT_REPLY, 603 Mpi2TargetModeAbortReply_t, MPI2_POINTER pMpi2TargetModeAbortReply_t; 604 605 606#endif 607 608