1/*- 2 * Implementation of Utility functions for all SCSI device types. 3 * 4 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 5 * 6 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs. 7 * Copyright (c) 1997, 1998, 2003 Kenneth D. Merry. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification, immediately at the beginning of the file. 16 * 2. The name of the author may not be used to endorse or promote products 17 * derived from this software without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD$"); 34 35#include <sys/param.h> 36#include <sys/types.h> 37#include <sys/stdint.h> 38 39#ifdef _KERNEL 40#include "opt_scsi.h" 41 42#include <sys/systm.h> 43#include <sys/libkern.h> 44#include <sys/kernel.h> 45#include <sys/lock.h> 46#include <sys/malloc.h> 47#include <sys/mutex.h> 48#include <sys/sysctl.h> 49#include <sys/ctype.h> 50#else 51#include <errno.h> 52#include <stdio.h> 53#include <stdlib.h> 54#include <string.h> 55#include <ctype.h> 56#endif 57 58#include <cam/cam.h> 59#include <cam/cam_ccb.h> 60#include <cam/cam_queue.h> 61#include <cam/cam_xpt.h> 62#include <cam/scsi/scsi_all.h> 63#include <sys/ata.h> 64#include <sys/sbuf.h> 65 66#ifdef _KERNEL 67#include <cam/cam_periph.h> 68#include <cam/cam_xpt_sim.h> 69#include <cam/cam_xpt_periph.h> 70#include <cam/cam_xpt_internal.h> 71#else 72#include <camlib.h> 73#include <stddef.h> 74 75#ifndef FALSE 76#define FALSE 0 77#endif /* FALSE */ 78#ifndef TRUE 79#define TRUE 1 80#endif /* TRUE */ 81#define ERESTART -1 /* restart syscall */ 82#define EJUSTRETURN -2 /* don't modify regs, just return */ 83#endif /* !_KERNEL */ 84 85/* 86 * This is the default number of milliseconds we wait for devices to settle 87 * after a SCSI bus reset. 88 */ 89#ifndef SCSI_DELAY 90#define SCSI_DELAY 2000 91#endif 92/* 93 * All devices need _some_ sort of bus settle delay, so we'll set it to 94 * a minimum value of 100ms. Note that this is pertinent only for SPI- 95 * not transport like Fibre Channel or iSCSI where 'delay' is completely 96 * meaningless. 97 */ 98#ifndef SCSI_MIN_DELAY 99#define SCSI_MIN_DELAY 100 100#endif 101/* 102 * Make sure the user isn't using seconds instead of milliseconds. 103 */ 104#if (SCSI_DELAY < SCSI_MIN_DELAY && SCSI_DELAY != 0) 105#error "SCSI_DELAY is in milliseconds, not seconds! Please use a larger value" 106#endif 107 108int scsi_delay; 109 110static int ascentrycomp(const void *key, const void *member); 111static int senseentrycomp(const void *key, const void *member); 112static void fetchtableentries(int sense_key, int asc, int ascq, 113 struct scsi_inquiry_data *, 114 const struct sense_key_table_entry **, 115 const struct asc_table_entry **); 116 117#ifdef _KERNEL 118static void init_scsi_delay(void); 119static int sysctl_scsi_delay(SYSCTL_HANDLER_ARGS); 120static int set_scsi_delay(int delay); 121#endif 122 123#if !defined(SCSI_NO_OP_STRINGS) 124 125#define D (1 << T_DIRECT) 126#define T (1 << T_SEQUENTIAL) 127#define L (1 << T_PRINTER) 128#define P (1 << T_PROCESSOR) 129#define W (1 << T_WORM) 130#define R (1 << T_CDROM) 131#define O (1 << T_OPTICAL) 132#define M (1 << T_CHANGER) 133#define A (1 << T_STORARRAY) 134#define E (1 << T_ENCLOSURE) 135#define B (1 << T_RBC) 136#define K (1 << T_OCRW) 137#define V (1 << T_ADC) 138#define F (1 << T_OSD) 139#define S (1 << T_SCANNER) 140#define C (1 << T_COMM) 141 142#define ALL (D | T | L | P | W | R | O | M | A | E | B | K | V | F | S | C) 143 144static struct op_table_entry plextor_cd_ops[] = { 145 { 0xD8, R, "CD-DA READ" } 146}; 147 148static struct scsi_op_quirk_entry scsi_op_quirk_table[] = { 149 { 150 /* 151 * I believe that 0xD8 is the Plextor proprietary command 152 * to read CD-DA data. I'm not sure which Plextor CDROM 153 * models support the command, though. I know for sure 154 * that the 4X, 8X, and 12X models do, and presumably the 155 * 12-20X does. I don't know about any earlier models, 156 * though. If anyone has any more complete information, 157 * feel free to change this quirk entry. 158 */ 159 {T_CDROM, SIP_MEDIA_REMOVABLE, "PLEXTOR", "CD-ROM PX*", "*"}, 160 nitems(plextor_cd_ops), 161 plextor_cd_ops 162 } 163}; 164 165static struct op_table_entry scsi_op_codes[] = { 166 /* 167 * From: http://www.t10.org/lists/op-num.txt 168 * Modifications by Kenneth Merry (ken@FreeBSD.ORG) 169 * and Jung-uk Kim (jkim@FreeBSD.org) 170 * 171 * Note: order is important in this table, scsi_op_desc() currently 172 * depends on the opcodes in the table being in order to save 173 * search time. 174 * Note: scanner and comm. devices are carried over from the previous 175 * version because they were removed in the latest spec. 176 */ 177 /* File: OP-NUM.TXT 178 * 179 * SCSI Operation Codes 180 * Numeric Sorted Listing 181 * as of 5/26/15 182 * 183 * D - DIRECT ACCESS DEVICE (SBC-2) device column key 184 * .T - SEQUENTIAL ACCESS DEVICE (SSC-2) ----------------- 185 * . L - PRINTER DEVICE (SSC) M = Mandatory 186 * . P - PROCESSOR DEVICE (SPC) O = Optional 187 * . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2) V = Vendor spec. 188 * . . R - CD/DVE DEVICE (MMC-3) Z = Obsolete 189 * . . O - OPTICAL MEMORY DEVICE (SBC-2) 190 * . . .M - MEDIA CHANGER DEVICE (SMC-2) 191 * . . . A - STORAGE ARRAY DEVICE (SCC-2) 192 * . . . .E - ENCLOSURE SERVICES DEVICE (SES) 193 * . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC) 194 * . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW) 195 * . . . . V - AUTOMATION/DRIVE INTERFACE (ADC) 196 * . . . . .F - OBJECT-BASED STORAGE (OSD) 197 * OP DTLPWROMAEBKVF Description 198 * -- -------------- ---------------------------------------------- */ 199 /* 00 MMMMMMMMMMMMMM TEST UNIT READY */ 200 { 0x00, ALL, "TEST UNIT READY" }, 201 /* 01 M REWIND */ 202 { 0x01, T, "REWIND" }, 203 /* 01 Z V ZZZZ REZERO UNIT */ 204 { 0x01, D | W | R | O | M, "REZERO UNIT" }, 205 /* 02 VVVVVV V */ 206 /* 03 MMMMMMMMMMOMMM REQUEST SENSE */ 207 { 0x03, ALL, "REQUEST SENSE" }, 208 /* 04 M OO FORMAT UNIT */ 209 { 0x04, D | R | O, "FORMAT UNIT" }, 210 /* 04 O FORMAT MEDIUM */ 211 { 0x04, T, "FORMAT MEDIUM" }, 212 /* 04 O FORMAT */ 213 { 0x04, L, "FORMAT" }, 214 /* 05 VMVVVV V READ BLOCK LIMITS */ 215 { 0x05, T, "READ BLOCK LIMITS" }, 216 /* 06 VVVVVV V */ 217 /* 07 OVV O OV REASSIGN BLOCKS */ 218 { 0x07, D | W | O, "REASSIGN BLOCKS" }, 219 /* 07 O INITIALIZE ELEMENT STATUS */ 220 { 0x07, M, "INITIALIZE ELEMENT STATUS" }, 221 /* 08 MOV O OV READ(6) */ 222 { 0x08, D | T | W | O, "READ(6)" }, 223 /* 08 O RECEIVE */ 224 { 0x08, P, "RECEIVE" }, 225 /* 08 GET MESSAGE(6) */ 226 { 0x08, C, "GET MESSAGE(6)" }, 227 /* 09 VVVVVV V */ 228 /* 0A OO O OV WRITE(6) */ 229 { 0x0A, D | T | W | O, "WRITE(6)" }, 230 /* 0A M SEND(6) */ 231 { 0x0A, P, "SEND(6)" }, 232 /* 0A SEND MESSAGE(6) */ 233 { 0x0A, C, "SEND MESSAGE(6)" }, 234 /* 0A M PRINT */ 235 { 0x0A, L, "PRINT" }, 236 /* 0B Z ZOZV SEEK(6) */ 237 { 0x0B, D | W | R | O, "SEEK(6)" }, 238 /* 0B O SET CAPACITY */ 239 { 0x0B, T, "SET CAPACITY" }, 240 /* 0B O SLEW AND PRINT */ 241 { 0x0B, L, "SLEW AND PRINT" }, 242 /* 0C VVVVVV V */ 243 /* 0D VVVVVV V */ 244 /* 0E VVVVVV V */ 245 /* 0F VOVVVV V READ REVERSE(6) */ 246 { 0x0F, T, "READ REVERSE(6)" }, 247 /* 10 VM VVV WRITE FILEMARKS(6) */ 248 { 0x10, T, "WRITE FILEMARKS(6)" }, 249 /* 10 O SYNCHRONIZE BUFFER */ 250 { 0x10, L, "SYNCHRONIZE BUFFER" }, 251 /* 11 VMVVVV SPACE(6) */ 252 { 0x11, T, "SPACE(6)" }, 253 /* 12 MMMMMMMMMMMMMM INQUIRY */ 254 { 0x12, ALL, "INQUIRY" }, 255 /* 13 V VVVV */ 256 /* 13 O VERIFY(6) */ 257 { 0x13, T, "VERIFY(6)" }, 258 /* 14 VOOVVV RECOVER BUFFERED DATA */ 259 { 0x14, T | L, "RECOVER BUFFERED DATA" }, 260 /* 15 OMO O OOOO OO MODE SELECT(6) */ 261 { 0x15, ALL & ~(P | R | B | F), "MODE SELECT(6)" }, 262 /* 16 ZZMZO OOOZ O RESERVE(6) */ 263 { 0x16, ALL & ~(R | B | V | F | C), "RESERVE(6)" }, 264 /* 16 Z RESERVE ELEMENT(6) */ 265 { 0x16, M, "RESERVE ELEMENT(6)" }, 266 /* 17 ZZMZO OOOZ O RELEASE(6) */ 267 { 0x17, ALL & ~(R | B | V | F | C), "RELEASE(6)" }, 268 /* 17 Z RELEASE ELEMENT(6) */ 269 { 0x17, M, "RELEASE ELEMENT(6)" }, 270 /* 18 ZZZZOZO Z COPY */ 271 { 0x18, D | T | L | P | W | R | O | K | S, "COPY" }, 272 /* 19 VMVVVV ERASE(6) */ 273 { 0x19, T, "ERASE(6)" }, 274 /* 1A OMO O OOOO OO MODE SENSE(6) */ 275 { 0x1A, ALL & ~(P | R | B | F), "MODE SENSE(6)" }, 276 /* 1B O OOO O MO O START STOP UNIT */ 277 { 0x1B, D | W | R | O | A | B | K | F, "START STOP UNIT" }, 278 /* 1B O M LOAD UNLOAD */ 279 { 0x1B, T | V, "LOAD UNLOAD" }, 280 /* 1B SCAN */ 281 { 0x1B, S, "SCAN" }, 282 /* 1B O STOP PRINT */ 283 { 0x1B, L, "STOP PRINT" }, 284 /* 1B O OPEN/CLOSE IMPORT/EXPORT ELEMENT */ 285 { 0x1B, M, "OPEN/CLOSE IMPORT/EXPORT ELEMENT" }, 286 /* 1C OOOOO OOOM OOO RECEIVE DIAGNOSTIC RESULTS */ 287 { 0x1C, ALL & ~(R | B), "RECEIVE DIAGNOSTIC RESULTS" }, 288 /* 1D MMMMM MMOM MMM SEND DIAGNOSTIC */ 289 { 0x1D, ALL & ~(R | B), "SEND DIAGNOSTIC" }, 290 /* 1E OO OOOO O O PREVENT ALLOW MEDIUM REMOVAL */ 291 { 0x1E, D | T | W | R | O | M | K | F, "PREVENT ALLOW MEDIUM REMOVAL" }, 292 /* 1F */ 293 /* 20 V VVV V */ 294 /* 21 V VVV V */ 295 /* 22 V VVV V */ 296 /* 23 V V V V */ 297 /* 23 O READ FORMAT CAPACITIES */ 298 { 0x23, R, "READ FORMAT CAPACITIES" }, 299 /* 24 V VV SET WINDOW */ 300 { 0x24, S, "SET WINDOW" }, 301 /* 25 M M M M READ CAPACITY(10) */ 302 { 0x25, D | W | O | B, "READ CAPACITY(10)" }, 303 /* 25 O READ CAPACITY */ 304 { 0x25, R, "READ CAPACITY" }, 305 /* 25 M READ CARD CAPACITY */ 306 { 0x25, K, "READ CARD CAPACITY" }, 307 /* 25 GET WINDOW */ 308 { 0x25, S, "GET WINDOW" }, 309 /* 26 V VV */ 310 /* 27 V VV */ 311 /* 28 M MOM MM READ(10) */ 312 { 0x28, D | W | R | O | B | K | S, "READ(10)" }, 313 /* 28 GET MESSAGE(10) */ 314 { 0x28, C, "GET MESSAGE(10)" }, 315 /* 29 V VVO READ GENERATION */ 316 { 0x29, O, "READ GENERATION" }, 317 /* 2A O MOM MO WRITE(10) */ 318 { 0x2A, D | W | R | O | B | K, "WRITE(10)" }, 319 /* 2A SEND(10) */ 320 { 0x2A, S, "SEND(10)" }, 321 /* 2A SEND MESSAGE(10) */ 322 { 0x2A, C, "SEND MESSAGE(10)" }, 323 /* 2B Z OOO O SEEK(10) */ 324 { 0x2B, D | W | R | O | K, "SEEK(10)" }, 325 /* 2B O LOCATE(10) */ 326 { 0x2B, T, "LOCATE(10)" }, 327 /* 2B O POSITION TO ELEMENT */ 328 { 0x2B, M, "POSITION TO ELEMENT" }, 329 /* 2C V OO ERASE(10) */ 330 { 0x2C, R | O, "ERASE(10)" }, 331 /* 2D O READ UPDATED BLOCK */ 332 { 0x2D, O, "READ UPDATED BLOCK" }, 333 /* 2D V */ 334 /* 2E O OOO MO WRITE AND VERIFY(10) */ 335 { 0x2E, D | W | R | O | B | K, "WRITE AND VERIFY(10)" }, 336 /* 2F O OOO VERIFY(10) */ 337 { 0x2F, D | W | R | O, "VERIFY(10)" }, 338 /* 30 Z ZZZ SEARCH DATA HIGH(10) */ 339 { 0x30, D | W | R | O, "SEARCH DATA HIGH(10)" }, 340 /* 31 Z ZZZ SEARCH DATA EQUAL(10) */ 341 { 0x31, D | W | R | O, "SEARCH DATA EQUAL(10)" }, 342 /* 31 OBJECT POSITION */ 343 { 0x31, S, "OBJECT POSITION" }, 344 /* 32 Z ZZZ SEARCH DATA LOW(10) */ 345 { 0x32, D | W | R | O, "SEARCH DATA LOW(10)" }, 346 /* 33 Z OZO SET LIMITS(10) */ 347 { 0x33, D | W | R | O, "SET LIMITS(10)" }, 348 /* 34 O O O O PRE-FETCH(10) */ 349 { 0x34, D | W | O | K, "PRE-FETCH(10)" }, 350 /* 34 M READ POSITION */ 351 { 0x34, T, "READ POSITION" }, 352 /* 34 GET DATA BUFFER STATUS */ 353 { 0x34, S, "GET DATA BUFFER STATUS" }, 354 /* 35 O OOO MO SYNCHRONIZE CACHE(10) */ 355 { 0x35, D | W | R | O | B | K, "SYNCHRONIZE CACHE(10)" }, 356 /* 36 Z O O O LOCK UNLOCK CACHE(10) */ 357 { 0x36, D | W | O | K, "LOCK UNLOCK CACHE(10)" }, 358 /* 37 O O READ DEFECT DATA(10) */ 359 { 0x37, D | O, "READ DEFECT DATA(10)" }, 360 /* 37 O INITIALIZE ELEMENT STATUS WITH RANGE */ 361 { 0x37, M, "INITIALIZE ELEMENT STATUS WITH RANGE" }, 362 /* 38 O O O MEDIUM SCAN */ 363 { 0x38, W | O | K, "MEDIUM SCAN" }, 364 /* 39 ZZZZOZO Z COMPARE */ 365 { 0x39, D | T | L | P | W | R | O | K | S, "COMPARE" }, 366 /* 3A ZZZZOZO Z COPY AND VERIFY */ 367 { 0x3A, D | T | L | P | W | R | O | K | S, "COPY AND VERIFY" }, 368 /* 3B OOOOOOOOOOMOOO WRITE BUFFER */ 369 { 0x3B, ALL, "WRITE BUFFER" }, 370 /* 3C OOOOOOOOOO OOO READ BUFFER */ 371 { 0x3C, ALL & ~(B), "READ BUFFER" }, 372 /* 3D O UPDATE BLOCK */ 373 { 0x3D, O, "UPDATE BLOCK" }, 374 /* 3E O O O READ LONG(10) */ 375 { 0x3E, D | W | O, "READ LONG(10)" }, 376 /* 3F O O O WRITE LONG(10) */ 377 { 0x3F, D | W | O, "WRITE LONG(10)" }, 378 /* 40 ZZZZOZOZ CHANGE DEFINITION */ 379 { 0x40, D | T | L | P | W | R | O | M | S | C, "CHANGE DEFINITION" }, 380 /* 41 O WRITE SAME(10) */ 381 { 0x41, D, "WRITE SAME(10)" }, 382 /* 42 O UNMAP */ 383 { 0x42, D, "UNMAP" }, 384 /* 42 O READ SUB-CHANNEL */ 385 { 0x42, R, "READ SUB-CHANNEL" }, 386 /* 43 O READ TOC/PMA/ATIP */ 387 { 0x43, R, "READ TOC/PMA/ATIP" }, 388 /* 44 M M REPORT DENSITY SUPPORT */ 389 { 0x44, T | V, "REPORT DENSITY SUPPORT" }, 390 /* 44 READ HEADER */ 391 /* 45 O PLAY AUDIO(10) */ 392 { 0x45, R, "PLAY AUDIO(10)" }, 393 /* 46 M GET CONFIGURATION */ 394 { 0x46, R, "GET CONFIGURATION" }, 395 /* 47 O PLAY AUDIO MSF */ 396 { 0x47, R, "PLAY AUDIO MSF" }, 397 /* 48 O SANITIZE */ 398 { 0x48, D, "SANITIZE" }, 399 /* 49 */ 400 /* 4A M GET EVENT STATUS NOTIFICATION */ 401 { 0x4A, R, "GET EVENT STATUS NOTIFICATION" }, 402 /* 4B O PAUSE/RESUME */ 403 { 0x4B, R, "PAUSE/RESUME" }, 404 /* 4C OOOOO OOOO OOO LOG SELECT */ 405 { 0x4C, ALL & ~(R | B), "LOG SELECT" }, 406 /* 4D OOOOO OOOO OMO LOG SENSE */ 407 { 0x4D, ALL & ~(R | B), "LOG SENSE" }, 408 /* 4E O STOP PLAY/SCAN */ 409 { 0x4E, R, "STOP PLAY/SCAN" }, 410 /* 4F */ 411 /* 50 O XDWRITE(10) */ 412 { 0x50, D, "XDWRITE(10)" }, 413 /* 51 O XPWRITE(10) */ 414 { 0x51, D, "XPWRITE(10)" }, 415 /* 51 O READ DISC INFORMATION */ 416 { 0x51, R, "READ DISC INFORMATION" }, 417 /* 52 O XDREAD(10) */ 418 { 0x52, D, "XDREAD(10)" }, 419 /* 52 O READ TRACK INFORMATION */ 420 { 0x52, R, "READ TRACK INFORMATION" }, 421 /* 53 O RESERVE TRACK */ 422 { 0x53, R, "RESERVE TRACK" }, 423 /* 54 O SEND OPC INFORMATION */ 424 { 0x54, R, "SEND OPC INFORMATION" }, 425 /* 55 OOO OMOOOOMOMO MODE SELECT(10) */ 426 { 0x55, ALL & ~(P), "MODE SELECT(10)" }, 427 /* 56 ZZMZO OOOZ RESERVE(10) */ 428 { 0x56, ALL & ~(R | B | K | V | F | C), "RESERVE(10)" }, 429 /* 56 Z RESERVE ELEMENT(10) */ 430 { 0x56, M, "RESERVE ELEMENT(10)" }, 431 /* 57 ZZMZO OOOZ RELEASE(10) */ 432 { 0x57, ALL & ~(R | B | K | V | F | C), "RELEASE(10)" }, 433 /* 57 Z RELEASE ELEMENT(10) */ 434 { 0x57, M, "RELEASE ELEMENT(10)" }, 435 /* 58 O REPAIR TRACK */ 436 { 0x58, R, "REPAIR TRACK" }, 437 /* 59 */ 438 /* 5A OOO OMOOOOMOMO MODE SENSE(10) */ 439 { 0x5A, ALL & ~(P), "MODE SENSE(10)" }, 440 /* 5B O CLOSE TRACK/SESSION */ 441 { 0x5B, R, "CLOSE TRACK/SESSION" }, 442 /* 5C O READ BUFFER CAPACITY */ 443 { 0x5C, R, "READ BUFFER CAPACITY" }, 444 /* 5D O SEND CUE SHEET */ 445 { 0x5D, R, "SEND CUE SHEET" }, 446 /* 5E OOOOO OOOO M PERSISTENT RESERVE IN */ 447 { 0x5E, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE IN" }, 448 /* 5F OOOOO OOOO M PERSISTENT RESERVE OUT */ 449 { 0x5F, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE OUT" }, 450 /* 7E OO O OOOO O extended CDB */ 451 { 0x7E, D | T | R | M | A | E | B | V, "extended CDB" }, 452 /* 7F O M variable length CDB (more than 16 bytes) */ 453 { 0x7F, D | F, "variable length CDB (more than 16 bytes)" }, 454 /* 80 Z XDWRITE EXTENDED(16) */ 455 { 0x80, D, "XDWRITE EXTENDED(16)" }, 456 /* 80 M WRITE FILEMARKS(16) */ 457 { 0x80, T, "WRITE FILEMARKS(16)" }, 458 /* 81 Z REBUILD(16) */ 459 { 0x81, D, "REBUILD(16)" }, 460 /* 81 O READ REVERSE(16) */ 461 { 0x81, T, "READ REVERSE(16)" }, 462 /* 82 Z REGENERATE(16) */ 463 { 0x82, D, "REGENERATE(16)" }, 464 /* 83 OOOOO O OO EXTENDED COPY */ 465 { 0x83, D | T | L | P | W | O | K | V, "EXTENDED COPY" }, 466 /* 84 OOOOO O OO RECEIVE COPY RESULTS */ 467 { 0x84, D | T | L | P | W | O | K | V, "RECEIVE COPY RESULTS" }, 468 /* 85 O O O ATA COMMAND PASS THROUGH(16) */ 469 { 0x85, D | R | B, "ATA COMMAND PASS THROUGH(16)" }, 470 /* 86 OO OO OOOOOOO ACCESS CONTROL IN */ 471 { 0x86, ALL & ~(L | R | F), "ACCESS CONTROL IN" }, 472 /* 87 OO OO OOOOOOO ACCESS CONTROL OUT */ 473 { 0x87, ALL & ~(L | R | F), "ACCESS CONTROL OUT" }, 474 /* 88 MM O O O READ(16) */ 475 { 0x88, D | T | W | O | B, "READ(16)" }, 476 /* 89 O COMPARE AND WRITE*/ 477 { 0x89, D, "COMPARE AND WRITE" }, 478 /* 8A OM O O O WRITE(16) */ 479 { 0x8A, D | T | W | O | B, "WRITE(16)" }, 480 /* 8B O ORWRITE */ 481 { 0x8B, D, "ORWRITE" }, 482 /* 8C OO O OO O M READ ATTRIBUTE */ 483 { 0x8C, D | T | W | O | M | B | V, "READ ATTRIBUTE" }, 484 /* 8D OO O OO O O WRITE ATTRIBUTE */ 485 { 0x8D, D | T | W | O | M | B | V, "WRITE ATTRIBUTE" }, 486 /* 8E O O O O WRITE AND VERIFY(16) */ 487 { 0x8E, D | W | O | B, "WRITE AND VERIFY(16)" }, 488 /* 8F OO O O O VERIFY(16) */ 489 { 0x8F, D | T | W | O | B, "VERIFY(16)" }, 490 /* 90 O O O O PRE-FETCH(16) */ 491 { 0x90, D | W | O | B, "PRE-FETCH(16)" }, 492 /* 91 O O O O SYNCHRONIZE CACHE(16) */ 493 { 0x91, D | W | O | B, "SYNCHRONIZE CACHE(16)" }, 494 /* 91 O SPACE(16) */ 495 { 0x91, T, "SPACE(16)" }, 496 /* 92 Z O O LOCK UNLOCK CACHE(16) */ 497 { 0x92, D | W | O, "LOCK UNLOCK CACHE(16)" }, 498 /* 92 O LOCATE(16) */ 499 { 0x92, T, "LOCATE(16)" }, 500 /* 93 O WRITE SAME(16) */ 501 { 0x93, D, "WRITE SAME(16)" }, 502 /* 93 M ERASE(16) */ 503 { 0x93, T, "ERASE(16)" }, 504 /* 94 O ZBC OUT */ 505 { 0x94, ALL, "ZBC OUT" }, 506 /* 95 O ZBC IN */ 507 { 0x95, ALL, "ZBC IN" }, 508 /* 96 */ 509 /* 97 */ 510 /* 98 */ 511 /* 99 */ 512 /* 9A O WRITE STREAM(16) */ 513 { 0x9A, D, "WRITE STREAM(16)" }, 514 /* 9B OOOOOOOOOO OOO READ BUFFER(16) */ 515 { 0x9B, ALL & ~(B) , "READ BUFFER(16)" }, 516 /* 9C O WRITE ATOMIC(16) */ 517 { 0x9C, D, "WRITE ATOMIC(16)" }, 518 /* 9D SERVICE ACTION BIDIRECTIONAL */ 519 { 0x9D, ALL, "SERVICE ACTION BIDIRECTIONAL" }, 520 /* XXX KDM ALL for this? op-num.txt defines it for none.. */ 521 /* 9E SERVICE ACTION IN(16) */ 522 { 0x9E, ALL, "SERVICE ACTION IN(16)" }, 523 /* 9F M SERVICE ACTION OUT(16) */ 524 { 0x9F, ALL, "SERVICE ACTION OUT(16)" }, 525 /* A0 MMOOO OMMM OMO REPORT LUNS */ 526 { 0xA0, ALL & ~(R | B), "REPORT LUNS" }, 527 /* A1 O BLANK */ 528 { 0xA1, R, "BLANK" }, 529 /* A1 O O ATA COMMAND PASS THROUGH(12) */ 530 { 0xA1, D | B, "ATA COMMAND PASS THROUGH(12)" }, 531 /* A2 OO O O SECURITY PROTOCOL IN */ 532 { 0xA2, D | T | R | V, "SECURITY PROTOCOL IN" }, 533 /* A3 OOO O OOMOOOM MAINTENANCE (IN) */ 534 { 0xA3, ALL & ~(P | R | F), "MAINTENANCE (IN)" }, 535 /* A3 O SEND KEY */ 536 { 0xA3, R, "SEND KEY" }, 537 /* A4 OOO O OOOOOOO MAINTENANCE (OUT) */ 538 { 0xA4, ALL & ~(P | R | F), "MAINTENANCE (OUT)" }, 539 /* A4 O REPORT KEY */ 540 { 0xA4, R, "REPORT KEY" }, 541 /* A5 O O OM MOVE MEDIUM */ 542 { 0xA5, T | W | O | M, "MOVE MEDIUM" }, 543 /* A5 O PLAY AUDIO(12) */ 544 { 0xA5, R, "PLAY AUDIO(12)" }, 545 /* A6 O EXCHANGE MEDIUM */ 546 { 0xA6, M, "EXCHANGE MEDIUM" }, 547 /* A6 O LOAD/UNLOAD C/DVD */ 548 { 0xA6, R, "LOAD/UNLOAD C/DVD" }, 549 /* A7 ZZ O O MOVE MEDIUM ATTACHED */ 550 { 0xA7, D | T | W | O, "MOVE MEDIUM ATTACHED" }, 551 /* A7 O SET READ AHEAD */ 552 { 0xA7, R, "SET READ AHEAD" }, 553 /* A8 O OOO READ(12) */ 554 { 0xA8, D | W | R | O, "READ(12)" }, 555 /* A8 GET MESSAGE(12) */ 556 { 0xA8, C, "GET MESSAGE(12)" }, 557 /* A9 O SERVICE ACTION OUT(12) */ 558 { 0xA9, V, "SERVICE ACTION OUT(12)" }, 559 /* AA O OOO WRITE(12) */ 560 { 0xAA, D | W | R | O, "WRITE(12)" }, 561 /* AA SEND MESSAGE(12) */ 562 { 0xAA, C, "SEND MESSAGE(12)" }, 563 /* AB O O SERVICE ACTION IN(12) */ 564 { 0xAB, R | V, "SERVICE ACTION IN(12)" }, 565 /* AC O ERASE(12) */ 566 { 0xAC, O, "ERASE(12)" }, 567 /* AC O GET PERFORMANCE */ 568 { 0xAC, R, "GET PERFORMANCE" }, 569 /* AD O READ DVD STRUCTURE */ 570 { 0xAD, R, "READ DVD STRUCTURE" }, 571 /* AE O O O WRITE AND VERIFY(12) */ 572 { 0xAE, D | W | O, "WRITE AND VERIFY(12)" }, 573 /* AF O OZO VERIFY(12) */ 574 { 0xAF, D | W | R | O, "VERIFY(12)" }, 575 /* B0 ZZZ SEARCH DATA HIGH(12) */ 576 { 0xB0, W | R | O, "SEARCH DATA HIGH(12)" }, 577 /* B1 ZZZ SEARCH DATA EQUAL(12) */ 578 { 0xB1, W | R | O, "SEARCH DATA EQUAL(12)" }, 579 /* B2 ZZZ SEARCH DATA LOW(12) */ 580 { 0xB2, W | R | O, "SEARCH DATA LOW(12)" }, 581 /* B3 Z OZO SET LIMITS(12) */ 582 { 0xB3, D | W | R | O, "SET LIMITS(12)" }, 583 /* B4 ZZ OZO READ ELEMENT STATUS ATTACHED */ 584 { 0xB4, D | T | W | R | O, "READ ELEMENT STATUS ATTACHED" }, 585 /* B5 OO O O SECURITY PROTOCOL OUT */ 586 { 0xB5, D | T | R | V, "SECURITY PROTOCOL OUT" }, 587 /* B5 O REQUEST VOLUME ELEMENT ADDRESS */ 588 { 0xB5, M, "REQUEST VOLUME ELEMENT ADDRESS" }, 589 /* B6 O SEND VOLUME TAG */ 590 { 0xB6, M, "SEND VOLUME TAG" }, 591 /* B6 O SET STREAMING */ 592 { 0xB6, R, "SET STREAMING" }, 593 /* B7 O O READ DEFECT DATA(12) */ 594 { 0xB7, D | O, "READ DEFECT DATA(12)" }, 595 /* B8 O OZOM READ ELEMENT STATUS */ 596 { 0xB8, T | W | R | O | M, "READ ELEMENT STATUS" }, 597 /* B9 O READ CD MSF */ 598 { 0xB9, R, "READ CD MSF" }, 599 /* BA O O OOMO REDUNDANCY GROUP (IN) */ 600 { 0xBA, D | W | O | M | A | E, "REDUNDANCY GROUP (IN)" }, 601 /* BA O SCAN */ 602 { 0xBA, R, "SCAN" }, 603 /* BB O O OOOO REDUNDANCY GROUP (OUT) */ 604 { 0xBB, D | W | O | M | A | E, "REDUNDANCY GROUP (OUT)" }, 605 /* BB O SET CD SPEED */ 606 { 0xBB, R, "SET CD SPEED" }, 607 /* BC O O OOMO SPARE (IN) */ 608 { 0xBC, D | W | O | M | A | E, "SPARE (IN)" }, 609 /* BD O O OOOO SPARE (OUT) */ 610 { 0xBD, D | W | O | M | A | E, "SPARE (OUT)" }, 611 /* BD O MECHANISM STATUS */ 612 { 0xBD, R, "MECHANISM STATUS" }, 613 /* BE O O OOMO VOLUME SET (IN) */ 614 { 0xBE, D | W | O | M | A | E, "VOLUME SET (IN)" }, 615 /* BE O READ CD */ 616 { 0xBE, R, "READ CD" }, 617 /* BF O O OOOO VOLUME SET (OUT) */ 618 { 0xBF, D | W | O | M | A | E, "VOLUME SET (OUT)" }, 619 /* BF O SEND DVD STRUCTURE */ 620 { 0xBF, R, "SEND DVD STRUCTURE" } 621}; 622 623const char * 624scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data) 625{ 626 caddr_t match; 627 int i, j; 628 u_int32_t opmask; 629 u_int16_t pd_type; 630 int num_ops[2]; 631 struct op_table_entry *table[2]; 632 int num_tables; 633 634 /* 635 * If we've got inquiry data, use it to determine what type of 636 * device we're dealing with here. Otherwise, assume direct 637 * access. 638 */ 639 if (inq_data == NULL) { 640 pd_type = T_DIRECT; 641 match = NULL; 642 } else { 643 pd_type = SID_TYPE(inq_data); 644 645 match = cam_quirkmatch((caddr_t)inq_data, 646 (caddr_t)scsi_op_quirk_table, 647 nitems(scsi_op_quirk_table), 648 sizeof(*scsi_op_quirk_table), 649 scsi_inquiry_match); 650 } 651 652 if (match != NULL) { 653 table[0] = ((struct scsi_op_quirk_entry *)match)->op_table; 654 num_ops[0] = ((struct scsi_op_quirk_entry *)match)->num_ops; 655 table[1] = scsi_op_codes; 656 num_ops[1] = nitems(scsi_op_codes); 657 num_tables = 2; 658 } else { 659 /* 660 * If this is true, we have a vendor specific opcode that 661 * wasn't covered in the quirk table. 662 */ 663 if ((opcode > 0xBF) || ((opcode > 0x5F) && (opcode < 0x80))) 664 return("Vendor Specific Command"); 665 666 table[0] = scsi_op_codes; 667 num_ops[0] = nitems(scsi_op_codes); 668 num_tables = 1; 669 } 670 671 /* RBC is 'Simplified' Direct Access Device */ 672 if (pd_type == T_RBC) 673 pd_type = T_DIRECT; 674 675 /* 676 * Host managed drives are direct access for the most part. 677 */ 678 if (pd_type == T_ZBC_HM) 679 pd_type = T_DIRECT; 680 681 /* Map NODEVICE to Direct Access Device to handle REPORT LUNS, etc. */ 682 if (pd_type == T_NODEVICE) 683 pd_type = T_DIRECT; 684 685 opmask = 1 << pd_type; 686 687 for (j = 0; j < num_tables; j++) { 688 for (i = 0;i < num_ops[j] && table[j][i].opcode <= opcode; i++){ 689 if ((table[j][i].opcode == opcode) 690 && ((table[j][i].opmask & opmask) != 0)) 691 return(table[j][i].desc); 692 } 693 } 694 695 /* 696 * If we can't find a match for the command in the table, we just 697 * assume it's a vendor specifc command. 698 */ 699 return("Vendor Specific Command"); 700 701} 702 703#else /* SCSI_NO_OP_STRINGS */ 704 705const char * 706scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data) 707{ 708 return(""); 709} 710 711#endif 712 713 714#if !defined(SCSI_NO_SENSE_STRINGS) 715#define SST(asc, ascq, action, desc) \ 716 asc, ascq, action, desc 717#else 718const char empty_string[] = ""; 719 720#define SST(asc, ascq, action, desc) \ 721 asc, ascq, action, empty_string 722#endif 723 724const struct sense_key_table_entry sense_key_table[] = 725{ 726 { SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" }, 727 { SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" }, 728 { SSD_KEY_NOT_READY, SS_RDEF, "NOT READY" }, 729 { SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" }, 730 { SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" }, 731 { SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" }, 732 { SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" }, 733 { SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" }, 734 { SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" }, 735 { SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" }, 736 { SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" }, 737 { SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" }, 738 { SSD_KEY_EQUAL, SS_NOP, "EQUAL" }, 739 { SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" }, 740 { SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" }, 741 { SSD_KEY_COMPLETED, SS_NOP, "COMPLETED" } 742}; 743 744static struct asc_table_entry quantum_fireball_entries[] = { 745 { SST(0x04, 0x0b, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 746 "Logical unit not ready, initializing cmd. required") } 747}; 748 749static struct asc_table_entry sony_mo_entries[] = { 750 { SST(0x04, 0x00, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 751 "Logical unit not ready, cause not reportable") } 752}; 753 754static struct asc_table_entry hgst_entries[] = { 755 { SST(0x04, 0xF0, SS_RDEF, 756 "Vendor Unique - Logical Unit Not Ready") }, 757 { SST(0x0A, 0x01, SS_RDEF, 758 "Unrecovered Super Certification Log Write Error") }, 759 { SST(0x0A, 0x02, SS_RDEF, 760 "Unrecovered Super Certification Log Read Error") }, 761 { SST(0x15, 0x03, SS_RDEF, 762 "Unrecovered Sector Error") }, 763 { SST(0x3E, 0x04, SS_RDEF, 764 "Unrecovered Self-Test Hard-Cache Test Fail") }, 765 { SST(0x3E, 0x05, SS_RDEF, 766 "Unrecovered Self-Test OTF-Cache Fail") }, 767 { SST(0x40, 0x00, SS_RDEF, 768 "Unrecovered SAT No Buffer Overflow Error") }, 769 { SST(0x40, 0x01, SS_RDEF, 770 "Unrecovered SAT Buffer Overflow Error") }, 771 { SST(0x40, 0x02, SS_RDEF, 772 "Unrecovered SAT No Buffer Overflow With ECS Fault") }, 773 { SST(0x40, 0x03, SS_RDEF, 774 "Unrecovered SAT Buffer Overflow With ECS Fault") }, 775 { SST(0x40, 0x81, SS_RDEF, 776 "DRAM Failure") }, 777 { SST(0x44, 0x0B, SS_RDEF, 778 "Vendor Unique - Internal Target Failure") }, 779 { SST(0x44, 0xF2, SS_RDEF, 780 "Vendor Unique - Internal Target Failure") }, 781 { SST(0x44, 0xF6, SS_RDEF, 782 "Vendor Unique - Internal Target Failure") }, 783 { SST(0x44, 0xF9, SS_RDEF, 784 "Vendor Unique - Internal Target Failure") }, 785 { SST(0x44, 0xFA, SS_RDEF, 786 "Vendor Unique - Internal Target Failure") }, 787 { SST(0x5D, 0x22, SS_RDEF, 788 "Extreme Over-Temperature Warning") }, 789 { SST(0x5D, 0x50, SS_RDEF, 790 "Load/Unload cycle Count Warning") }, 791 { SST(0x81, 0x00, SS_RDEF, 792 "Vendor Unique - Internal Logic Error") }, 793 { SST(0x85, 0x00, SS_RDEF, 794 "Vendor Unique - Internal Key Seed Error") }, 795}; 796 797static struct asc_table_entry seagate_entries[] = { 798 { SST(0x04, 0xF0, SS_RDEF, 799 "Logical Unit Not Ready, super certify in Progress") }, 800 { SST(0x08, 0x86, SS_RDEF, 801 "Write Fault Data Corruption") }, 802 { SST(0x09, 0x0D, SS_RDEF, 803 "Tracking Failure") }, 804 { SST(0x09, 0x0E, SS_RDEF, 805 "ETF Failure") }, 806 { SST(0x0B, 0x5D, SS_RDEF, 807 "Pre-SMART Warning") }, 808 { SST(0x0B, 0x85, SS_RDEF, 809 "5V Voltage Warning") }, 810 { SST(0x0B, 0x8C, SS_RDEF, 811 "12V Voltage Warning") }, 812 { SST(0x0C, 0xFF, SS_RDEF, 813 "Write Error - Too many error recovery revs") }, 814 { SST(0x11, 0xFF, SS_RDEF, 815 "Unrecovered Read Error - Too many error recovery revs") }, 816 { SST(0x19, 0x0E, SS_RDEF, 817 "Fewer than 1/2 defect list copies") }, 818 { SST(0x20, 0xF3, SS_RDEF, 819 "Illegal CDB linked to skip mask cmd") }, 820 { SST(0x24, 0xF0, SS_RDEF, 821 "Illegal byte in CDB, LBA not matching") }, 822 { SST(0x24, 0xF1, SS_RDEF, 823 "Illegal byte in CDB, LEN not matching") }, 824 { SST(0x24, 0xF2, SS_RDEF, 825 "Mask not matching transfer length") }, 826 { SST(0x24, 0xF3, SS_RDEF, 827 "Drive formatted without plist") }, 828 { SST(0x26, 0x95, SS_RDEF, 829 "Invalid Field Parameter - CAP File") }, 830 { SST(0x26, 0x96, SS_RDEF, 831 "Invalid Field Parameter - RAP File") }, 832 { SST(0x26, 0x97, SS_RDEF, 833 "Invalid Field Parameter - TMS Firmware Tag") }, 834 { SST(0x26, 0x98, SS_RDEF, 835 "Invalid Field Parameter - Check Sum") }, 836 { SST(0x26, 0x99, SS_RDEF, 837 "Invalid Field Parameter - Firmware Tag") }, 838 { SST(0x29, 0x08, SS_RDEF, 839 "Write Log Dump data") }, 840 { SST(0x29, 0x09, SS_RDEF, 841 "Write Log Dump data") }, 842 { SST(0x29, 0x0A, SS_RDEF, 843 "Reserved disk space") }, 844 { SST(0x29, 0x0B, SS_RDEF, 845 "SDBP") }, 846 { SST(0x29, 0x0C, SS_RDEF, 847 "SDBP") }, 848 { SST(0x31, 0x91, SS_RDEF, 849 "Format Corrupted World Wide Name (WWN) is Invalid") }, 850 { SST(0x32, 0x03, SS_RDEF, 851 "Defect List - Length exceeds Command Allocated Length") }, 852 { SST(0x33, 0x00, SS_RDEF, 853 "Flash not ready for access") }, 854 { SST(0x3F, 0x70, SS_RDEF, 855 "Invalid RAP block") }, 856 { SST(0x3F, 0x71, SS_RDEF, 857 "RAP/ETF mismatch") }, 858 { SST(0x3F, 0x90, SS_RDEF, 859 "Invalid CAP block") }, 860 { SST(0x3F, 0x91, SS_RDEF, 861 "World Wide Name (WWN) Mismatch") }, 862 { SST(0x40, 0x01, SS_RDEF, 863 "DRAM Parity Error") }, 864 { SST(0x40, 0x02, SS_RDEF, 865 "DRAM Parity Error") }, 866 { SST(0x42, 0x0A, SS_RDEF, 867 "Loopback Test") }, 868 { SST(0x42, 0x0B, SS_RDEF, 869 "Loopback Test") }, 870 { SST(0x44, 0xF2, SS_RDEF, 871 "Compare error during data integrity check") }, 872 { SST(0x44, 0xF6, SS_RDEF, 873 "Unrecoverable error during data integrity check") }, 874 { SST(0x47, 0x80, SS_RDEF, 875 "Fibre Channel Sequence Error") }, 876 { SST(0x4E, 0x01, SS_RDEF, 877 "Information Unit Too Short") }, 878 { SST(0x80, 0x00, SS_RDEF, 879 "General Firmware Error / Command Timeout") }, 880 { SST(0x80, 0x01, SS_RDEF, 881 "Command Timeout") }, 882 { SST(0x80, 0x02, SS_RDEF, 883 "Command Timeout") }, 884 { SST(0x80, 0x80, SS_RDEF, 885 "FC FIFO Error During Read Transfer") }, 886 { SST(0x80, 0x81, SS_RDEF, 887 "FC FIFO Error During Write Transfer") }, 888 { SST(0x80, 0x82, SS_RDEF, 889 "DISC FIFO Error During Read Transfer") }, 890 { SST(0x80, 0x83, SS_RDEF, 891 "DISC FIFO Error During Write Transfer") }, 892 { SST(0x80, 0x84, SS_RDEF, 893 "LBA Seeded LRC Error on Read") }, 894 { SST(0x80, 0x85, SS_RDEF, 895 "LBA Seeded LRC Error on Write") }, 896 { SST(0x80, 0x86, SS_RDEF, 897 "IOEDC Error on Read") }, 898 { SST(0x80, 0x87, SS_RDEF, 899 "IOEDC Error on Write") }, 900 { SST(0x80, 0x88, SS_RDEF, 901 "Host Parity Check Failed") }, 902 { SST(0x80, 0x89, SS_RDEF, 903 "IOEDC error on read detected by formatter") }, 904 { SST(0x80, 0x8A, SS_RDEF, 905 "Host Parity Errors / Host FIFO Initialization Failed") }, 906 { SST(0x80, 0x8B, SS_RDEF, 907 "Host Parity Errors") }, 908 { SST(0x80, 0x8C, SS_RDEF, 909 "Host Parity Errors") }, 910 { SST(0x80, 0x8D, SS_RDEF, 911 "Host Parity Errors") }, 912 { SST(0x81, 0x00, SS_RDEF, 913 "LA Check Failed") }, 914 { SST(0x82, 0x00, SS_RDEF, 915 "Internal client detected insufficient buffer") }, 916 { SST(0x84, 0x00, SS_RDEF, 917 "Scheduled Diagnostic And Repair") }, 918}; 919 920static struct scsi_sense_quirk_entry sense_quirk_table[] = { 921 { 922 /* 923 * XXX The Quantum Fireball ST and SE like to return 0x04 0x0b 924 * when they really should return 0x04 0x02. 925 */ 926 {T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"}, 927 /*num_sense_keys*/0, 928 nitems(quantum_fireball_entries), 929 /*sense key entries*/NULL, 930 quantum_fireball_entries 931 }, 932 { 933 /* 934 * This Sony MO drive likes to return 0x04, 0x00 when it 935 * isn't spun up. 936 */ 937 {T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"}, 938 /*num_sense_keys*/0, 939 nitems(sony_mo_entries), 940 /*sense key entries*/NULL, 941 sony_mo_entries 942 }, 943 { 944 /* 945 * HGST vendor-specific error codes 946 */ 947 {T_DIRECT, SIP_MEDIA_FIXED, "HGST", "*", "*"}, 948 /*num_sense_keys*/0, 949 nitems(hgst_entries), 950 /*sense key entries*/NULL, 951 hgst_entries 952 }, 953 { 954 /* 955 * SEAGATE vendor-specific error codes 956 */ 957 {T_DIRECT, SIP_MEDIA_FIXED, "SEAGATE", "*", "*"}, 958 /*num_sense_keys*/0, 959 nitems(seagate_entries), 960 /*sense key entries*/NULL, 961 seagate_entries 962 } 963}; 964 965const u_int sense_quirk_table_size = nitems(sense_quirk_table); 966 967static struct asc_table_entry asc_table[] = { 968 /* 969 * From: http://www.t10.org/lists/asc-num.txt 970 * Modifications by Jung-uk Kim (jkim@FreeBSD.org) 971 */ 972 /* 973 * File: ASC-NUM.TXT 974 * 975 * SCSI ASC/ASCQ Assignments 976 * Numeric Sorted Listing 977 * as of 8/12/15 978 * 979 * D - DIRECT ACCESS DEVICE (SBC-2) device column key 980 * .T - SEQUENTIAL ACCESS DEVICE (SSC) ------------------- 981 * . L - PRINTER DEVICE (SSC) blank = reserved 982 * . P - PROCESSOR DEVICE (SPC) not blank = allowed 983 * . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2) 984 * . . R - CD DEVICE (MMC) 985 * . . O - OPTICAL MEMORY DEVICE (SBC-2) 986 * . . .M - MEDIA CHANGER DEVICE (SMC) 987 * . . . A - STORAGE ARRAY DEVICE (SCC) 988 * . . . E - ENCLOSURE SERVICES DEVICE (SES) 989 * . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC) 990 * . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW) 991 * . . . . V - AUTOMATION/DRIVE INTERFACE (ADC) 992 * . . . . .F - OBJECT-BASED STORAGE (OSD) 993 * DTLPWROMAEBKVF 994 * ASC ASCQ Action 995 * Description 996 */ 997 /* DTLPWROMAEBKVF */ 998 { SST(0x00, 0x00, SS_NOP, 999 "No additional sense information") }, 1000 /* T */ 1001 { SST(0x00, 0x01, SS_RDEF, 1002 "Filemark detected") }, 1003 /* T */ 1004 { SST(0x00, 0x02, SS_RDEF, 1005 "End-of-partition/medium detected") }, 1006 /* T */ 1007 { SST(0x00, 0x03, SS_RDEF, 1008 "Setmark detected") }, 1009 /* T */ 1010 { SST(0x00, 0x04, SS_RDEF, 1011 "Beginning-of-partition/medium detected") }, 1012 /* TL */ 1013 { SST(0x00, 0x05, SS_RDEF, 1014 "End-of-data detected") }, 1015 /* DTLPWROMAEBKVF */ 1016 { SST(0x00, 0x06, SS_RDEF, 1017 "I/O process terminated") }, 1018 /* T */ 1019 { SST(0x00, 0x07, SS_RDEF, /* XXX TBD */ 1020 "Programmable early warning detected") }, 1021 /* R */ 1022 { SST(0x00, 0x11, SS_FATAL | EBUSY, 1023 "Audio play operation in progress") }, 1024 /* R */ 1025 { SST(0x00, 0x12, SS_NOP, 1026 "Audio play operation paused") }, 1027 /* R */ 1028 { SST(0x00, 0x13, SS_NOP, 1029 "Audio play operation successfully completed") }, 1030 /* R */ 1031 { SST(0x00, 0x14, SS_RDEF, 1032 "Audio play operation stopped due to error") }, 1033 /* R */ 1034 { SST(0x00, 0x15, SS_NOP, 1035 "No current audio status to return") }, 1036 /* DTLPWROMAEBKVF */ 1037 { SST(0x00, 0x16, SS_FATAL | EBUSY, 1038 "Operation in progress") }, 1039 /* DTL WROMAEBKVF */ 1040 { SST(0x00, 0x17, SS_RDEF, 1041 "Cleaning requested") }, 1042 /* T */ 1043 { SST(0x00, 0x18, SS_RDEF, /* XXX TBD */ 1044 "Erase operation in progress") }, 1045 /* T */ 1046 { SST(0x00, 0x19, SS_RDEF, /* XXX TBD */ 1047 "Locate operation in progress") }, 1048 /* T */ 1049 { SST(0x00, 0x1A, SS_RDEF, /* XXX TBD */ 1050 "Rewind operation in progress") }, 1051 /* T */ 1052 { SST(0x00, 0x1B, SS_RDEF, /* XXX TBD */ 1053 "Set capacity operation in progress") }, 1054 /* T */ 1055 { SST(0x00, 0x1C, SS_RDEF, /* XXX TBD */ 1056 "Verify operation in progress") }, 1057 /* DT B */ 1058 { SST(0x00, 0x1D, SS_NOP, 1059 "ATA pass through information available") }, 1060 /* DT R MAEBKV */ 1061 { SST(0x00, 0x1E, SS_RDEF, /* XXX TBD */ 1062 "Conflicting SA creation request") }, 1063 /* DT B */ 1064 { SST(0x00, 0x1F, SS_RDEF, /* XXX TBD */ 1065 "Logical unit transitioning to another power condition") }, 1066 /* DT P B */ 1067 { SST(0x00, 0x20, SS_NOP, 1068 "Extended copy information available") }, 1069 /* D */ 1070 { SST(0x00, 0x21, SS_RDEF, /* XXX TBD */ 1071 "Atomic command aborted due to ACA") }, 1072 /* D W O BK */ 1073 { SST(0x01, 0x00, SS_RDEF, 1074 "No index/sector signal") }, 1075 /* D WRO BK */ 1076 { SST(0x02, 0x00, SS_RDEF, 1077 "No seek complete") }, 1078 /* DTL W O BK */ 1079 { SST(0x03, 0x00, SS_RDEF, 1080 "Peripheral device write fault") }, 1081 /* T */ 1082 { SST(0x03, 0x01, SS_RDEF, 1083 "No write current") }, 1084 /* T */ 1085 { SST(0x03, 0x02, SS_RDEF, 1086 "Excessive write errors") }, 1087 /* DTLPWROMAEBKVF */ 1088 { SST(0x04, 0x00, SS_RDEF, 1089 "Logical unit not ready, cause not reportable") }, 1090 /* DTLPWROMAEBKVF */ 1091 { SST(0x04, 0x01, SS_WAIT | EBUSY, 1092 "Logical unit is in process of becoming ready") }, 1093 /* DTLPWROMAEBKVF */ 1094 { SST(0x04, 0x02, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 1095 "Logical unit not ready, initializing command required") }, 1096 /* DTLPWROMAEBKVF */ 1097 { SST(0x04, 0x03, SS_FATAL | ENXIO, 1098 "Logical unit not ready, manual intervention required") }, 1099 /* DTL RO B */ 1100 { SST(0x04, 0x04, SS_FATAL | EBUSY, 1101 "Logical unit not ready, format in progress") }, 1102 /* DT W O A BK F */ 1103 { SST(0x04, 0x05, SS_FATAL | EBUSY, 1104 "Logical unit not ready, rebuild in progress") }, 1105 /* DT W O A BK */ 1106 { SST(0x04, 0x06, SS_FATAL | EBUSY, 1107 "Logical unit not ready, recalculation in progress") }, 1108 /* DTLPWROMAEBKVF */ 1109 { SST(0x04, 0x07, SS_FATAL | EBUSY, 1110 "Logical unit not ready, operation in progress") }, 1111 /* R */ 1112 { SST(0x04, 0x08, SS_FATAL | EBUSY, 1113 "Logical unit not ready, long write in progress") }, 1114 /* DTLPWROMAEBKVF */ 1115 { SST(0x04, 0x09, SS_FATAL | EBUSY, 1116 "Logical unit not ready, self-test in progress") }, 1117 /* DTLPWROMAEBKVF */ 1118 { SST(0x04, 0x0A, SS_WAIT | ENXIO, 1119 "Logical unit not accessible, asymmetric access state transition")}, 1120 /* DTLPWROMAEBKVF */ 1121 { SST(0x04, 0x0B, SS_FATAL | ENXIO, 1122 "Logical unit not accessible, target port in standby state") }, 1123 /* DTLPWROMAEBKVF */ 1124 { SST(0x04, 0x0C, SS_FATAL | ENXIO, 1125 "Logical unit not accessible, target port in unavailable state") }, 1126 /* F */ 1127 { SST(0x04, 0x0D, SS_RDEF, /* XXX TBD */ 1128 "Logical unit not ready, structure check required") }, 1129 /* DTL WR MAEBKVF */ 1130 { SST(0x04, 0x0E, SS_RDEF, /* XXX TBD */ 1131 "Logical unit not ready, security session in progress") }, 1132 /* DT WROM B */ 1133 { SST(0x04, 0x10, SS_FATAL | ENODEV, 1134 "Logical unit not ready, auxiliary memory not accessible") }, 1135 /* DT WRO AEB VF */ 1136 { SST(0x04, 0x11, SS_WAIT | ENXIO, 1137 "Logical unit not ready, notify (enable spinup) required") }, 1138 /* M V */ 1139 { SST(0x04, 0x12, SS_FATAL | ENXIO, 1140 "Logical unit not ready, offline") }, 1141 /* DT R MAEBKV */ 1142 { SST(0x04, 0x13, SS_WAIT | EBUSY, 1143 "Logical unit not ready, SA creation in progress") }, 1144 /* D B */ 1145 { SST(0x04, 0x14, SS_WAIT | ENOSPC, 1146 "Logical unit not ready, space allocation in progress") }, 1147 /* M */ 1148 { SST(0x04, 0x15, SS_FATAL | ENXIO, 1149 "Logical unit not ready, robotics disabled") }, 1150 /* M */ 1151 { SST(0x04, 0x16, SS_FATAL | ENXIO, 1152 "Logical unit not ready, configuration required") }, 1153 /* M */ 1154 { SST(0x04, 0x17, SS_FATAL | ENXIO, 1155 "Logical unit not ready, calibration required") }, 1156 /* M */ 1157 { SST(0x04, 0x18, SS_FATAL | ENXIO, 1158 "Logical unit not ready, a door is open") }, 1159 /* M */ 1160 { SST(0x04, 0x19, SS_FATAL | ENODEV, 1161 "Logical unit not ready, operating in sequential mode") }, 1162 /* DT B */ 1163 { SST(0x04, 0x1A, SS_WAIT | EBUSY, 1164 "Logical unit not ready, START/STOP UNIT command in progress") }, 1165 /* D B */ 1166 { SST(0x04, 0x1B, SS_WAIT | EBUSY, 1167 "Logical unit not ready, sanitize in progress") }, 1168 /* DT MAEB */ 1169 { SST(0x04, 0x1C, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 1170 "Logical unit not ready, additional power use not yet granted") }, 1171 /* D */ 1172 { SST(0x04, 0x1D, SS_WAIT | EBUSY, 1173 "Logical unit not ready, configuration in progress") }, 1174 /* D */ 1175 { SST(0x04, 0x1E, SS_FATAL | ENXIO, 1176 "Logical unit not ready, microcode activation required") }, 1177 /* DTLPWROMAEBKVF */ 1178 { SST(0x04, 0x1F, SS_FATAL | ENXIO, 1179 "Logical unit not ready, microcode download required") }, 1180 /* DTLPWROMAEBKVF */ 1181 { SST(0x04, 0x20, SS_FATAL | ENXIO, 1182 "Logical unit not ready, logical unit reset required") }, 1183 /* DTLPWROMAEBKVF */ 1184 { SST(0x04, 0x21, SS_FATAL | ENXIO, 1185 "Logical unit not ready, hard reset required") }, 1186 /* DTLPWROMAEBKVF */ 1187 { SST(0x04, 0x22, SS_FATAL | ENXIO, 1188 "Logical unit not ready, power cycle required") }, 1189 /* D */ 1190 { SST(0x04, 0x23, SS_FATAL | ENXIO, 1191 "Logical unit not ready, affiliation required") }, 1192 /* D */ 1193 { SST(0x04, 0x24, SS_FATAL | EBUSY, 1194 "Depopulation in progress") }, 1195 /* DTL WROMAEBKVF */ 1196 { SST(0x05, 0x00, SS_RDEF, 1197 "Logical unit does not respond to selection") }, 1198 /* D WROM BK */ 1199 { SST(0x06, 0x00, SS_RDEF, 1200 "No reference position found") }, 1201 /* DTL WROM BK */ 1202 { SST(0x07, 0x00, SS_RDEF, 1203 "Multiple peripheral devices selected") }, 1204 /* DTL WROMAEBKVF */ 1205 { SST(0x08, 0x00, SS_RDEF, 1206 "Logical unit communication failure") }, 1207 /* DTL WROMAEBKVF */ 1208 { SST(0x08, 0x01, SS_RDEF, 1209 "Logical unit communication time-out") }, 1210 /* DTL WROMAEBKVF */ 1211 { SST(0x08, 0x02, SS_RDEF, 1212 "Logical unit communication parity error") }, 1213 /* DT ROM BK */ 1214 { SST(0x08, 0x03, SS_RDEF, 1215 "Logical unit communication CRC error (Ultra-DMA/32)") }, 1216 /* DTLPWRO K */ 1217 { SST(0x08, 0x04, SS_RDEF, /* XXX TBD */ 1218 "Unreachable copy target") }, 1219 /* DT WRO B */ 1220 { SST(0x09, 0x00, SS_RDEF, 1221 "Track following error") }, 1222 /* WRO K */ 1223 { SST(0x09, 0x01, SS_RDEF, 1224 "Tracking servo failure") }, 1225 /* WRO K */ 1226 { SST(0x09, 0x02, SS_RDEF, 1227 "Focus servo failure") }, 1228 /* WRO */ 1229 { SST(0x09, 0x03, SS_RDEF, 1230 "Spindle servo failure") }, 1231 /* DT WRO B */ 1232 { SST(0x09, 0x04, SS_RDEF, 1233 "Head select fault") }, 1234 /* DT RO B */ 1235 { SST(0x09, 0x05, SS_RDEF, 1236 "Vibration induced tracking error") }, 1237 /* DTLPWROMAEBKVF */ 1238 { SST(0x0A, 0x00, SS_FATAL | ENOSPC, 1239 "Error log overflow") }, 1240 /* DTLPWROMAEBKVF */ 1241 { SST(0x0B, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1242 "Warning") }, 1243 /* DTLPWROMAEBKVF */ 1244 { SST(0x0B, 0x01, SS_NOP | SSQ_PRINT_SENSE, 1245 "Warning - specified temperature exceeded") }, 1246 /* DTLPWROMAEBKVF */ 1247 { SST(0x0B, 0x02, SS_NOP | SSQ_PRINT_SENSE, 1248 "Warning - enclosure degraded") }, 1249 /* DTLPWROMAEBKVF */ 1250 { SST(0x0B, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1251 "Warning - background self-test failed") }, 1252 /* DTLPWRO AEBKVF */ 1253 { SST(0x0B, 0x04, SS_NOP | SSQ_PRINT_SENSE, 1254 "Warning - background pre-scan detected medium error") }, 1255 /* DTLPWRO AEBKVF */ 1256 { SST(0x0B, 0x05, SS_NOP | SSQ_PRINT_SENSE, 1257 "Warning - background medium scan detected medium error") }, 1258 /* DTLPWROMAEBKVF */ 1259 { SST(0x0B, 0x06, SS_NOP | SSQ_PRINT_SENSE, 1260 "Warning - non-volatile cache now volatile") }, 1261 /* DTLPWROMAEBKVF */ 1262 { SST(0x0B, 0x07, SS_NOP | SSQ_PRINT_SENSE, 1263 "Warning - degraded power to non-volatile cache") }, 1264 /* DTLPWROMAEBKVF */ 1265 { SST(0x0B, 0x08, SS_NOP | SSQ_PRINT_SENSE, 1266 "Warning - power loss expected") }, 1267 /* D */ 1268 { SST(0x0B, 0x09, SS_NOP | SSQ_PRINT_SENSE, 1269 "Warning - device statistics notification available") }, 1270 /* DTLPWROMAEBKVF */ 1271 { SST(0x0B, 0x0A, SS_NOP | SSQ_PRINT_SENSE, 1272 "Warning - High critical temperature limit exceeded") }, 1273 /* DTLPWROMAEBKVF */ 1274 { SST(0x0B, 0x0B, SS_NOP | SSQ_PRINT_SENSE, 1275 "Warning - Low critical temperature limit exceeded") }, 1276 /* DTLPWROMAEBKVF */ 1277 { SST(0x0B, 0x0C, SS_NOP | SSQ_PRINT_SENSE, 1278 "Warning - High operating temperature limit exceeded") }, 1279 /* DTLPWROMAEBKVF */ 1280 { SST(0x0B, 0x0D, SS_NOP | SSQ_PRINT_SENSE, 1281 "Warning - Low operating temperature limit exceeded") }, 1282 /* DTLPWROMAEBKVF */ 1283 { SST(0x0B, 0x0E, SS_NOP | SSQ_PRINT_SENSE, 1284 "Warning - High citical humidity limit exceeded") }, 1285 /* DTLPWROMAEBKVF */ 1286 { SST(0x0B, 0x0F, SS_NOP | SSQ_PRINT_SENSE, 1287 "Warning - Low citical humidity limit exceeded") }, 1288 /* DTLPWROMAEBKVF */ 1289 { SST(0x0B, 0x10, SS_NOP | SSQ_PRINT_SENSE, 1290 "Warning - High operating humidity limit exceeded") }, 1291 /* DTLPWROMAEBKVF */ 1292 { SST(0x0B, 0x11, SS_NOP | SSQ_PRINT_SENSE, 1293 "Warning - Low operating humidity limit exceeded") }, 1294 /* T R */ 1295 { SST(0x0C, 0x00, SS_RDEF, 1296 "Write error") }, 1297 /* K */ 1298 { SST(0x0C, 0x01, SS_NOP | SSQ_PRINT_SENSE, 1299 "Write error - recovered with auto reallocation") }, 1300 /* D W O BK */ 1301 { SST(0x0C, 0x02, SS_RDEF, 1302 "Write error - auto reallocation failed") }, 1303 /* D W O BK */ 1304 { SST(0x0C, 0x03, SS_RDEF, 1305 "Write error - recommend reassignment") }, 1306 /* DT W O B */ 1307 { SST(0x0C, 0x04, SS_RDEF, 1308 "Compression check miscompare error") }, 1309 /* DT W O B */ 1310 { SST(0x0C, 0x05, SS_RDEF, 1311 "Data expansion occurred during compression") }, 1312 /* DT W O B */ 1313 { SST(0x0C, 0x06, SS_RDEF, 1314 "Block not compressible") }, 1315 /* R */ 1316 { SST(0x0C, 0x07, SS_RDEF, 1317 "Write error - recovery needed") }, 1318 /* R */ 1319 { SST(0x0C, 0x08, SS_RDEF, 1320 "Write error - recovery failed") }, 1321 /* R */ 1322 { SST(0x0C, 0x09, SS_RDEF, 1323 "Write error - loss of streaming") }, 1324 /* R */ 1325 { SST(0x0C, 0x0A, SS_RDEF, 1326 "Write error - padding blocks added") }, 1327 /* DT WROM B */ 1328 { SST(0x0C, 0x0B, SS_RDEF, /* XXX TBD */ 1329 "Auxiliary memory write error") }, 1330 /* DTLPWRO AEBKVF */ 1331 { SST(0x0C, 0x0C, SS_RDEF, /* XXX TBD */ 1332 "Write error - unexpected unsolicited data") }, 1333 /* DTLPWRO AEBKVF */ 1334 { SST(0x0C, 0x0D, SS_RDEF, /* XXX TBD */ 1335 "Write error - not enough unsolicited data") }, 1336 /* DT W O BK */ 1337 { SST(0x0C, 0x0E, SS_RDEF, /* XXX TBD */ 1338 "Multiple write errors") }, 1339 /* R */ 1340 { SST(0x0C, 0x0F, SS_RDEF, /* XXX TBD */ 1341 "Defects in error window") }, 1342 /* D */ 1343 { SST(0x0C, 0x10, SS_RDEF, /* XXX TBD */ 1344 "Incomplete multiple atomic write operations") }, 1345 /* D */ 1346 { SST(0x0C, 0x11, SS_RDEF, /* XXX TBD */ 1347 "Write error - recovery scan needed") }, 1348 /* D */ 1349 { SST(0x0C, 0x12, SS_RDEF, /* XXX TBD */ 1350 "Write error - insufficient zone resources") }, 1351 /* DTLPWRO A K */ 1352 { SST(0x0D, 0x00, SS_RDEF, /* XXX TBD */ 1353 "Error detected by third party temporary initiator") }, 1354 /* DTLPWRO A K */ 1355 { SST(0x0D, 0x01, SS_RDEF, /* XXX TBD */ 1356 "Third party device failure") }, 1357 /* DTLPWRO A K */ 1358 { SST(0x0D, 0x02, SS_RDEF, /* XXX TBD */ 1359 "Copy target device not reachable") }, 1360 /* DTLPWRO A K */ 1361 { SST(0x0D, 0x03, SS_RDEF, /* XXX TBD */ 1362 "Incorrect copy target device type") }, 1363 /* DTLPWRO A K */ 1364 { SST(0x0D, 0x04, SS_RDEF, /* XXX TBD */ 1365 "Copy target device data underrun") }, 1366 /* DTLPWRO A K */ 1367 { SST(0x0D, 0x05, SS_RDEF, /* XXX TBD */ 1368 "Copy target device data overrun") }, 1369 /* DT PWROMAEBK F */ 1370 { SST(0x0E, 0x00, SS_RDEF, /* XXX TBD */ 1371 "Invalid information unit") }, 1372 /* DT PWROMAEBK F */ 1373 { SST(0x0E, 0x01, SS_RDEF, /* XXX TBD */ 1374 "Information unit too short") }, 1375 /* DT PWROMAEBK F */ 1376 { SST(0x0E, 0x02, SS_RDEF, /* XXX TBD */ 1377 "Information unit too long") }, 1378 /* DT P R MAEBK F */ 1379 { SST(0x0E, 0x03, SS_FATAL | EINVAL, 1380 "Invalid field in command information unit") }, 1381 /* D W O BK */ 1382 { SST(0x10, 0x00, SS_RDEF, 1383 "ID CRC or ECC error") }, 1384 /* DT W O */ 1385 { SST(0x10, 0x01, SS_RDEF, /* XXX TBD */ 1386 "Logical block guard check failed") }, 1387 /* DT W O */ 1388 { SST(0x10, 0x02, SS_RDEF, /* XXX TBD */ 1389 "Logical block application tag check failed") }, 1390 /* DT W O */ 1391 { SST(0x10, 0x03, SS_RDEF, /* XXX TBD */ 1392 "Logical block reference tag check failed") }, 1393 /* T */ 1394 { SST(0x10, 0x04, SS_RDEF, /* XXX TBD */ 1395 "Logical block protection error on recovered buffer data") }, 1396 /* T */ 1397 { SST(0x10, 0x05, SS_RDEF, /* XXX TBD */ 1398 "Logical block protection method error") }, 1399 /* DT WRO BK */ 1400 { SST(0x11, 0x00, SS_FATAL|EIO, 1401 "Unrecovered read error") }, 1402 /* DT WRO BK */ 1403 { SST(0x11, 0x01, SS_FATAL|EIO, 1404 "Read retries exhausted") }, 1405 /* DT WRO BK */ 1406 { SST(0x11, 0x02, SS_FATAL|EIO, 1407 "Error too long to correct") }, 1408 /* DT W O BK */ 1409 { SST(0x11, 0x03, SS_FATAL|EIO, 1410 "Multiple read errors") }, 1411 /* D W O BK */ 1412 { SST(0x11, 0x04, SS_FATAL|EIO, 1413 "Unrecovered read error - auto reallocate failed") }, 1414 /* WRO B */ 1415 { SST(0x11, 0x05, SS_FATAL|EIO, 1416 "L-EC uncorrectable error") }, 1417 /* WRO B */ 1418 { SST(0x11, 0x06, SS_FATAL|EIO, 1419 "CIRC unrecovered error") }, 1420 /* W O B */ 1421 { SST(0x11, 0x07, SS_RDEF, 1422 "Data re-synchronization error") }, 1423 /* T */ 1424 { SST(0x11, 0x08, SS_RDEF, 1425 "Incomplete block read") }, 1426 /* T */ 1427 { SST(0x11, 0x09, SS_RDEF, 1428 "No gap found") }, 1429 /* DT O BK */ 1430 { SST(0x11, 0x0A, SS_RDEF, 1431 "Miscorrected error") }, 1432 /* D W O BK */ 1433 { SST(0x11, 0x0B, SS_FATAL|EIO, 1434 "Unrecovered read error - recommend reassignment") }, 1435 /* D W O BK */ 1436 { SST(0x11, 0x0C, SS_FATAL|EIO, 1437 "Unrecovered read error - recommend rewrite the data") }, 1438 /* DT WRO B */ 1439 { SST(0x11, 0x0D, SS_RDEF, 1440 "De-compression CRC error") }, 1441 /* DT WRO B */ 1442 { SST(0x11, 0x0E, SS_RDEF, 1443 "Cannot decompress using declared algorithm") }, 1444 /* R */ 1445 { SST(0x11, 0x0F, SS_RDEF, 1446 "Error reading UPC/EAN number") }, 1447 /* R */ 1448 { SST(0x11, 0x10, SS_RDEF, 1449 "Error reading ISRC number") }, 1450 /* R */ 1451 { SST(0x11, 0x11, SS_RDEF, 1452 "Read error - loss of streaming") }, 1453 /* DT WROM B */ 1454 { SST(0x11, 0x12, SS_RDEF, /* XXX TBD */ 1455 "Auxiliary memory read error") }, 1456 /* DTLPWRO AEBKVF */ 1457 { SST(0x11, 0x13, SS_RDEF, /* XXX TBD */ 1458 "Read error - failed retransmission request") }, 1459 /* D */ 1460 { SST(0x11, 0x14, SS_RDEF, /* XXX TBD */ 1461 "Read error - LBA marked bad by application client") }, 1462 /* D */ 1463 { SST(0x11, 0x15, SS_FATAL | EIO, 1464 "Write after sanitize required") }, 1465 /* D W O BK */ 1466 { SST(0x12, 0x00, SS_RDEF, 1467 "Address mark not found for ID field") }, 1468 /* D W O BK */ 1469 { SST(0x13, 0x00, SS_RDEF, 1470 "Address mark not found for data field") }, 1471 /* DTL WRO BK */ 1472 { SST(0x14, 0x00, SS_RDEF, 1473 "Recorded entity not found") }, 1474 /* DT WRO BK */ 1475 { SST(0x14, 0x01, SS_RDEF, 1476 "Record not found") }, 1477 /* T */ 1478 { SST(0x14, 0x02, SS_RDEF, 1479 "Filemark or setmark not found") }, 1480 /* T */ 1481 { SST(0x14, 0x03, SS_RDEF, 1482 "End-of-data not found") }, 1483 /* T */ 1484 { SST(0x14, 0x04, SS_RDEF, 1485 "Block sequence error") }, 1486 /* DT W O BK */ 1487 { SST(0x14, 0x05, SS_RDEF, 1488 "Record not found - recommend reassignment") }, 1489 /* DT W O BK */ 1490 { SST(0x14, 0x06, SS_RDEF, 1491 "Record not found - data auto-reallocated") }, 1492 /* T */ 1493 { SST(0x14, 0x07, SS_RDEF, /* XXX TBD */ 1494 "Locate operation failure") }, 1495 /* DTL WROM BK */ 1496 { SST(0x15, 0x00, SS_RDEF, 1497 "Random positioning error") }, 1498 /* DTL WROM BK */ 1499 { SST(0x15, 0x01, SS_RDEF, 1500 "Mechanical positioning error") }, 1501 /* DT WRO BK */ 1502 { SST(0x15, 0x02, SS_RDEF, 1503 "Positioning error detected by read of medium") }, 1504 /* D W O BK */ 1505 { SST(0x16, 0x00, SS_RDEF, 1506 "Data synchronization mark error") }, 1507 /* D W O BK */ 1508 { SST(0x16, 0x01, SS_RDEF, 1509 "Data sync error - data rewritten") }, 1510 /* D W O BK */ 1511 { SST(0x16, 0x02, SS_RDEF, 1512 "Data sync error - recommend rewrite") }, 1513 /* D W O BK */ 1514 { SST(0x16, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1515 "Data sync error - data auto-reallocated") }, 1516 /* D W O BK */ 1517 { SST(0x16, 0x04, SS_RDEF, 1518 "Data sync error - recommend reassignment") }, 1519 /* DT WRO BK */ 1520 { SST(0x17, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1521 "Recovered data with no error correction applied") }, 1522 /* DT WRO BK */ 1523 { SST(0x17, 0x01, SS_NOP | SSQ_PRINT_SENSE, 1524 "Recovered data with retries") }, 1525 /* DT WRO BK */ 1526 { SST(0x17, 0x02, SS_NOP | SSQ_PRINT_SENSE, 1527 "Recovered data with positive head offset") }, 1528 /* DT WRO BK */ 1529 { SST(0x17, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1530 "Recovered data with negative head offset") }, 1531 /* WRO B */ 1532 { SST(0x17, 0x04, SS_NOP | SSQ_PRINT_SENSE, 1533 "Recovered data with retries and/or CIRC applied") }, 1534 /* D WRO BK */ 1535 { SST(0x17, 0x05, SS_NOP | SSQ_PRINT_SENSE, 1536 "Recovered data using previous sector ID") }, 1537 /* D W O BK */ 1538 { SST(0x17, 0x06, SS_NOP | SSQ_PRINT_SENSE, 1539 "Recovered data without ECC - data auto-reallocated") }, 1540 /* D WRO BK */ 1541 { SST(0x17, 0x07, SS_NOP | SSQ_PRINT_SENSE, 1542 "Recovered data without ECC - recommend reassignment") }, 1543 /* D WRO BK */ 1544 { SST(0x17, 0x08, SS_NOP | SSQ_PRINT_SENSE, 1545 "Recovered data without ECC - recommend rewrite") }, 1546 /* D WRO BK */ 1547 { SST(0x17, 0x09, SS_NOP | SSQ_PRINT_SENSE, 1548 "Recovered data without ECC - data rewritten") }, 1549 /* DT WRO BK */ 1550 { SST(0x18, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1551 "Recovered data with error correction applied") }, 1552 /* D WRO BK */ 1553 { SST(0x18, 0x01, SS_NOP | SSQ_PRINT_SENSE, 1554 "Recovered data with error corr. & retries applied") }, 1555 /* D WRO BK */ 1556 { SST(0x18, 0x02, SS_NOP | SSQ_PRINT_SENSE, 1557 "Recovered data - data auto-reallocated") }, 1558 /* R */ 1559 { SST(0x18, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1560 "Recovered data with CIRC") }, 1561 /* R */ 1562 { SST(0x18, 0x04, SS_NOP | SSQ_PRINT_SENSE, 1563 "Recovered data with L-EC") }, 1564 /* D WRO BK */ 1565 { SST(0x18, 0x05, SS_NOP | SSQ_PRINT_SENSE, 1566 "Recovered data - recommend reassignment") }, 1567 /* D WRO BK */ 1568 { SST(0x18, 0x06, SS_NOP | SSQ_PRINT_SENSE, 1569 "Recovered data - recommend rewrite") }, 1570 /* D W O BK */ 1571 { SST(0x18, 0x07, SS_NOP | SSQ_PRINT_SENSE, 1572 "Recovered data with ECC - data rewritten") }, 1573 /* R */ 1574 { SST(0x18, 0x08, SS_RDEF, /* XXX TBD */ 1575 "Recovered data with linking") }, 1576 /* D O K */ 1577 { SST(0x19, 0x00, SS_RDEF, 1578 "Defect list error") }, 1579 /* D O K */ 1580 { SST(0x19, 0x01, SS_RDEF, 1581 "Defect list not available") }, 1582 /* D O K */ 1583 { SST(0x19, 0x02, SS_RDEF, 1584 "Defect list error in primary list") }, 1585 /* D O K */ 1586 { SST(0x19, 0x03, SS_RDEF, 1587 "Defect list error in grown list") }, 1588 /* DTLPWROMAEBKVF */ 1589 { SST(0x1A, 0x00, SS_RDEF, 1590 "Parameter list length error") }, 1591 /* DTLPWROMAEBKVF */ 1592 { SST(0x1B, 0x00, SS_RDEF, 1593 "Synchronous data transfer error") }, 1594 /* D O BK */ 1595 { SST(0x1C, 0x00, SS_RDEF, 1596 "Defect list not found") }, 1597 /* D O BK */ 1598 { SST(0x1C, 0x01, SS_RDEF, 1599 "Primary defect list not found") }, 1600 /* D O BK */ 1601 { SST(0x1C, 0x02, SS_RDEF, 1602 "Grown defect list not found") }, 1603 /* DT WRO BK */ 1604 { SST(0x1D, 0x00, SS_FATAL, 1605 "Miscompare during verify operation") }, 1606 /* D B */ 1607 { SST(0x1D, 0x01, SS_RDEF, /* XXX TBD */ 1608 "Miscomparable verify of unmapped LBA") }, 1609 /* D W O BK */ 1610 { SST(0x1E, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1611 "Recovered ID with ECC correction") }, 1612 /* D O K */ 1613 { SST(0x1F, 0x00, SS_RDEF, 1614 "Partial defect list transfer") }, 1615 /* DTLPWROMAEBKVF */ 1616 { SST(0x20, 0x00, SS_FATAL | EINVAL, 1617 "Invalid command operation code") }, 1618 /* DT PWROMAEBK */ 1619 { SST(0x20, 0x01, SS_RDEF, /* XXX TBD */ 1620 "Access denied - initiator pending-enrolled") }, 1621 /* DT PWROMAEBK */ 1622 { SST(0x20, 0x02, SS_FATAL | EPERM, 1623 "Access denied - no access rights") }, 1624 /* DT PWROMAEBK */ 1625 { SST(0x20, 0x03, SS_RDEF, /* XXX TBD */ 1626 "Access denied - invalid mgmt ID key") }, 1627 /* T */ 1628 { SST(0x20, 0x04, SS_RDEF, /* XXX TBD */ 1629 "Illegal command while in write capable state") }, 1630 /* T */ 1631 { SST(0x20, 0x05, SS_RDEF, /* XXX TBD */ 1632 "Obsolete") }, 1633 /* T */ 1634 { SST(0x20, 0x06, SS_RDEF, /* XXX TBD */ 1635 "Illegal command while in explicit address mode") }, 1636 /* T */ 1637 { SST(0x20, 0x07, SS_RDEF, /* XXX TBD */ 1638 "Illegal command while in implicit address mode") }, 1639 /* DT PWROMAEBK */ 1640 { SST(0x20, 0x08, SS_RDEF, /* XXX TBD */ 1641 "Access denied - enrollment conflict") }, 1642 /* DT PWROMAEBK */ 1643 { SST(0x20, 0x09, SS_RDEF, /* XXX TBD */ 1644 "Access denied - invalid LU identifier") }, 1645 /* DT PWROMAEBK */ 1646 { SST(0x20, 0x0A, SS_RDEF, /* XXX TBD */ 1647 "Access denied - invalid proxy token") }, 1648 /* DT PWROMAEBK */ 1649 { SST(0x20, 0x0B, SS_RDEF, /* XXX TBD */ 1650 "Access denied - ACL LUN conflict") }, 1651 /* T */ 1652 { SST(0x20, 0x0C, SS_FATAL | EINVAL, 1653 "Illegal command when not in append-only mode") }, 1654 /* DT WRO BK */ 1655 { SST(0x21, 0x00, SS_FATAL | EINVAL, 1656 "Logical block address out of range") }, 1657 /* DT WROM BK */ 1658 { SST(0x21, 0x01, SS_FATAL | EINVAL, 1659 "Invalid element address") }, 1660 /* R */ 1661 { SST(0x21, 0x02, SS_RDEF, /* XXX TBD */ 1662 "Invalid address for write") }, 1663 /* R */ 1664 { SST(0x21, 0x03, SS_RDEF, /* XXX TBD */ 1665 "Invalid write crossing layer jump") }, 1666 /* D */ 1667 { SST(0x21, 0x04, SS_RDEF, /* XXX TBD */ 1668 "Unaligned write command") }, 1669 /* D */ 1670 { SST(0x21, 0x05, SS_RDEF, /* XXX TBD */ 1671 "Write boundary violation") }, 1672 /* D */ 1673 { SST(0x21, 0x06, SS_RDEF, /* XXX TBD */ 1674 "Attempt to read invalid data") }, 1675 /* D */ 1676 { SST(0x21, 0x07, SS_RDEF, /* XXX TBD */ 1677 "Read boundary violation") }, 1678 /* D */ 1679 { SST(0x22, 0x00, SS_FATAL | EINVAL, 1680 "Illegal function (use 20 00, 24 00, or 26 00)") }, 1681 /* DT P B */ 1682 { SST(0x23, 0x00, SS_FATAL | EINVAL, 1683 "Invalid token operation, cause not reportable") }, 1684 /* DT P B */ 1685 { SST(0x23, 0x01, SS_FATAL | EINVAL, 1686 "Invalid token operation, unsupported token type") }, 1687 /* DT P B */ 1688 { SST(0x23, 0x02, SS_FATAL | EINVAL, 1689 "Invalid token operation, remote token usage not supported") }, 1690 /* DT P B */ 1691 { SST(0x23, 0x03, SS_FATAL | EINVAL, 1692 "Invalid token operation, remote ROD token creation not supported") }, 1693 /* DT P B */ 1694 { SST(0x23, 0x04, SS_FATAL | EINVAL, 1695 "Invalid token operation, token unknown") }, 1696 /* DT P B */ 1697 { SST(0x23, 0x05, SS_FATAL | EINVAL, 1698 "Invalid token operation, token corrupt") }, 1699 /* DT P B */ 1700 { SST(0x23, 0x06, SS_FATAL | EINVAL, 1701 "Invalid token operation, token revoked") }, 1702 /* DT P B */ 1703 { SST(0x23, 0x07, SS_FATAL | EINVAL, 1704 "Invalid token operation, token expired") }, 1705 /* DT P B */ 1706 { SST(0x23, 0x08, SS_FATAL | EINVAL, 1707 "Invalid token operation, token cancelled") }, 1708 /* DT P B */ 1709 { SST(0x23, 0x09, SS_FATAL | EINVAL, 1710 "Invalid token operation, token deleted") }, 1711 /* DT P B */ 1712 { SST(0x23, 0x0A, SS_FATAL | EINVAL, 1713 "Invalid token operation, invalid token length") }, 1714 /* DTLPWROMAEBKVF */ 1715 { SST(0x24, 0x00, SS_FATAL | EINVAL, 1716 "Invalid field in CDB") }, 1717 /* DTLPWRO AEBKVF */ 1718 { SST(0x24, 0x01, SS_RDEF, /* XXX TBD */ 1719 "CDB decryption error") }, 1720 /* T */ 1721 { SST(0x24, 0x02, SS_RDEF, /* XXX TBD */ 1722 "Obsolete") }, 1723 /* T */ 1724 { SST(0x24, 0x03, SS_RDEF, /* XXX TBD */ 1725 "Obsolete") }, 1726 /* F */ 1727 { SST(0x24, 0x04, SS_RDEF, /* XXX TBD */ 1728 "Security audit value frozen") }, 1729 /* F */ 1730 { SST(0x24, 0x05, SS_RDEF, /* XXX TBD */ 1731 "Security working key frozen") }, 1732 /* F */ 1733 { SST(0x24, 0x06, SS_RDEF, /* XXX TBD */ 1734 "NONCE not unique") }, 1735 /* F */ 1736 { SST(0x24, 0x07, SS_RDEF, /* XXX TBD */ 1737 "NONCE timestamp out of range") }, 1738 /* DT R MAEBKV */ 1739 { SST(0x24, 0x08, SS_RDEF, /* XXX TBD */ 1740 "Invalid XCDB") }, 1741 /* DTLPWROMAEBKVF */ 1742 { SST(0x25, 0x00, SS_FATAL | ENXIO | SSQ_LOST, 1743 "Logical unit not supported") }, 1744 /* DTLPWROMAEBKVF */ 1745 { SST(0x26, 0x00, SS_FATAL | EINVAL, 1746 "Invalid field in parameter list") }, 1747 /* DTLPWROMAEBKVF */ 1748 { SST(0x26, 0x01, SS_FATAL | EINVAL, 1749 "Parameter not supported") }, 1750 /* DTLPWROMAEBKVF */ 1751 { SST(0x26, 0x02, SS_FATAL | EINVAL, 1752 "Parameter value invalid") }, 1753 /* DTLPWROMAE K */ 1754 { SST(0x26, 0x03, SS_FATAL | EINVAL, 1755 "Threshold parameters not supported") }, 1756 /* DTLPWROMAEBKVF */ 1757 { SST(0x26, 0x04, SS_FATAL | EINVAL, 1758 "Invalid release of persistent reservation") }, 1759 /* DTLPWRO A BK */ 1760 { SST(0x26, 0x05, SS_RDEF, /* XXX TBD */ 1761 "Data decryption error") }, 1762 /* DTLPWRO K */ 1763 { SST(0x26, 0x06, SS_FATAL | EINVAL, 1764 "Too many target descriptors") }, 1765 /* DTLPWRO K */ 1766 { SST(0x26, 0x07, SS_FATAL | EINVAL, 1767 "Unsupported target descriptor type code") }, 1768 /* DTLPWRO K */ 1769 { SST(0x26, 0x08, SS_FATAL | EINVAL, 1770 "Too many segment descriptors") }, 1771 /* DTLPWRO K */ 1772 { SST(0x26, 0x09, SS_FATAL | EINVAL, 1773 "Unsupported segment descriptor type code") }, 1774 /* DTLPWRO K */ 1775 { SST(0x26, 0x0A, SS_FATAL | EINVAL, 1776 "Unexpected inexact segment") }, 1777 /* DTLPWRO K */ 1778 { SST(0x26, 0x0B, SS_FATAL | EINVAL, 1779 "Inline data length exceeded") }, 1780 /* DTLPWRO K */ 1781 { SST(0x26, 0x0C, SS_FATAL | EINVAL, 1782 "Invalid operation for copy source or destination") }, 1783 /* DTLPWRO K */ 1784 { SST(0x26, 0x0D, SS_FATAL | EINVAL, 1785 "Copy segment granularity violation") }, 1786 /* DT PWROMAEBK */ 1787 { SST(0x26, 0x0E, SS_RDEF, /* XXX TBD */ 1788 "Invalid parameter while port is enabled") }, 1789 /* F */ 1790 { SST(0x26, 0x0F, SS_RDEF, /* XXX TBD */ 1791 "Invalid data-out buffer integrity check value") }, 1792 /* T */ 1793 { SST(0x26, 0x10, SS_RDEF, /* XXX TBD */ 1794 "Data decryption key fail limit reached") }, 1795 /* T */ 1796 { SST(0x26, 0x11, SS_RDEF, /* XXX TBD */ 1797 "Incomplete key-associated data set") }, 1798 /* T */ 1799 { SST(0x26, 0x12, SS_RDEF, /* XXX TBD */ 1800 "Vendor specific key reference not found") }, 1801 /* D */ 1802 { SST(0x26, 0x13, SS_RDEF, /* XXX TBD */ 1803 "Application tag mode page is invalid") }, 1804 /* DT WRO BK */ 1805 { SST(0x27, 0x00, SS_FATAL | EACCES, 1806 "Write protected") }, 1807 /* DT WRO BK */ 1808 { SST(0x27, 0x01, SS_FATAL | EACCES, 1809 "Hardware write protected") }, 1810 /* DT WRO BK */ 1811 { SST(0x27, 0x02, SS_FATAL | EACCES, 1812 "Logical unit software write protected") }, 1813 /* T R */ 1814 { SST(0x27, 0x03, SS_FATAL | EACCES, 1815 "Associated write protect") }, 1816 /* T R */ 1817 { SST(0x27, 0x04, SS_FATAL | EACCES, 1818 "Persistent write protect") }, 1819 /* T R */ 1820 { SST(0x27, 0x05, SS_FATAL | EACCES, 1821 "Permanent write protect") }, 1822 /* R F */ 1823 { SST(0x27, 0x06, SS_RDEF, /* XXX TBD */ 1824 "Conditional write protect") }, 1825 /* D B */ 1826 { SST(0x27, 0x07, SS_FATAL | ENOSPC, 1827 "Space allocation failed write protect") }, 1828 /* D */ 1829 { SST(0x27, 0x08, SS_FATAL | EACCES, 1830 "Zone is read only") }, 1831 /* DTLPWROMAEBKVF */ 1832 { SST(0x28, 0x00, SS_FATAL | ENXIO, 1833 "Not ready to ready change, medium may have changed") }, 1834 /* DT WROM B */ 1835 { SST(0x28, 0x01, SS_FATAL | ENXIO, 1836 "Import or export element accessed") }, 1837 /* R */ 1838 { SST(0x28, 0x02, SS_RDEF, /* XXX TBD */ 1839 "Format-layer may have changed") }, 1840 /* M */ 1841 { SST(0x28, 0x03, SS_RDEF, /* XXX TBD */ 1842 "Import/export element accessed, medium changed") }, 1843 /* 1844 * XXX JGibbs - All of these should use the same errno, but I don't 1845 * think ENXIO is the correct choice. Should we borrow from 1846 * the networking errnos? ECONNRESET anyone? 1847 */ 1848 /* DTLPWROMAEBKVF */ 1849 { SST(0x29, 0x00, SS_FATAL | ENXIO, 1850 "Power on, reset, or bus device reset occurred") }, 1851 /* DTLPWROMAEBKVF */ 1852 { SST(0x29, 0x01, SS_RDEF, 1853 "Power on occurred") }, 1854 /* DTLPWROMAEBKVF */ 1855 { SST(0x29, 0x02, SS_RDEF, 1856 "SCSI bus reset occurred") }, 1857 /* DTLPWROMAEBKVF */ 1858 { SST(0x29, 0x03, SS_RDEF, 1859 "Bus device reset function occurred") }, 1860 /* DTLPWROMAEBKVF */ 1861 { SST(0x29, 0x04, SS_RDEF, 1862 "Device internal reset") }, 1863 /* DTLPWROMAEBKVF */ 1864 { SST(0x29, 0x05, SS_RDEF, 1865 "Transceiver mode changed to single-ended") }, 1866 /* DTLPWROMAEBKVF */ 1867 { SST(0x29, 0x06, SS_RDEF, 1868 "Transceiver mode changed to LVD") }, 1869 /* DTLPWROMAEBKVF */ 1870 { SST(0x29, 0x07, SS_RDEF, /* XXX TBD */ 1871 "I_T nexus loss occurred") }, 1872 /* DTL WROMAEBKVF */ 1873 { SST(0x2A, 0x00, SS_RDEF, 1874 "Parameters changed") }, 1875 /* DTL WROMAEBKVF */ 1876 { SST(0x2A, 0x01, SS_RDEF, 1877 "Mode parameters changed") }, 1878 /* DTL WROMAE K */ 1879 { SST(0x2A, 0x02, SS_RDEF, 1880 "Log parameters changed") }, 1881 /* DTLPWROMAE K */ 1882 { SST(0x2A, 0x03, SS_RDEF, 1883 "Reservations preempted") }, 1884 /* DTLPWROMAE */ 1885 { SST(0x2A, 0x04, SS_RDEF, /* XXX TBD */ 1886 "Reservations released") }, 1887 /* DTLPWROMAE */ 1888 { SST(0x2A, 0x05, SS_RDEF, /* XXX TBD */ 1889 "Registrations preempted") }, 1890 /* DTLPWROMAEBKVF */ 1891 { SST(0x2A, 0x06, SS_RDEF, /* XXX TBD */ 1892 "Asymmetric access state changed") }, 1893 /* DTLPWROMAEBKVF */ 1894 { SST(0x2A, 0x07, SS_RDEF, /* XXX TBD */ 1895 "Implicit asymmetric access state transition failed") }, 1896 /* DT WROMAEBKVF */ 1897 { SST(0x2A, 0x08, SS_RDEF, /* XXX TBD */ 1898 "Priority changed") }, 1899 /* D */ 1900 { SST(0x2A, 0x09, SS_RDEF, /* XXX TBD */ 1901 "Capacity data has changed") }, 1902 /* DT */ 1903 { SST(0x2A, 0x0A, SS_RDEF, /* XXX TBD */ 1904 "Error history I_T nexus cleared") }, 1905 /* DT */ 1906 { SST(0x2A, 0x0B, SS_RDEF, /* XXX TBD */ 1907 "Error history snapshot released") }, 1908 /* F */ 1909 { SST(0x2A, 0x0C, SS_RDEF, /* XXX TBD */ 1910 "Error recovery attributes have changed") }, 1911 /* T */ 1912 { SST(0x2A, 0x0D, SS_RDEF, /* XXX TBD */ 1913 "Data encryption capabilities changed") }, 1914 /* DT M E V */ 1915 { SST(0x2A, 0x10, SS_RDEF, /* XXX TBD */ 1916 "Timestamp changed") }, 1917 /* T */ 1918 { SST(0x2A, 0x11, SS_RDEF, /* XXX TBD */ 1919 "Data encryption parameters changed by another I_T nexus") }, 1920 /* T */ 1921 { SST(0x2A, 0x12, SS_RDEF, /* XXX TBD */ 1922 "Data encryption parameters changed by vendor specific event") }, 1923 /* T */ 1924 { SST(0x2A, 0x13, SS_RDEF, /* XXX TBD */ 1925 "Data encryption key instance counter has changed") }, 1926 /* DT R MAEBKV */ 1927 { SST(0x2A, 0x14, SS_RDEF, /* XXX TBD */ 1928 "SA creation capabilities data has changed") }, 1929 /* T M V */ 1930 { SST(0x2A, 0x15, SS_RDEF, /* XXX TBD */ 1931 "Medium removal prevention preempted") }, 1932 /* DTLPWRO K */ 1933 { SST(0x2B, 0x00, SS_RDEF, 1934 "Copy cannot execute since host cannot disconnect") }, 1935 /* DTLPWROMAEBKVF */ 1936 { SST(0x2C, 0x00, SS_RDEF, 1937 "Command sequence error") }, 1938 /* */ 1939 { SST(0x2C, 0x01, SS_RDEF, 1940 "Too many windows specified") }, 1941 /* */ 1942 { SST(0x2C, 0x02, SS_RDEF, 1943 "Invalid combination of windows specified") }, 1944 /* R */ 1945 { SST(0x2C, 0x03, SS_RDEF, 1946 "Current program area is not empty") }, 1947 /* R */ 1948 { SST(0x2C, 0x04, SS_RDEF, 1949 "Current program area is empty") }, 1950 /* B */ 1951 { SST(0x2C, 0x05, SS_RDEF, /* XXX TBD */ 1952 "Illegal power condition request") }, 1953 /* R */ 1954 { SST(0x2C, 0x06, SS_RDEF, /* XXX TBD */ 1955 "Persistent prevent conflict") }, 1956 /* DTLPWROMAEBKVF */ 1957 { SST(0x2C, 0x07, SS_RDEF, /* XXX TBD */ 1958 "Previous busy status") }, 1959 /* DTLPWROMAEBKVF */ 1960 { SST(0x2C, 0x08, SS_RDEF, /* XXX TBD */ 1961 "Previous task set full status") }, 1962 /* DTLPWROM EBKVF */ 1963 { SST(0x2C, 0x09, SS_RDEF, /* XXX TBD */ 1964 "Previous reservation conflict status") }, 1965 /* F */ 1966 { SST(0x2C, 0x0A, SS_RDEF, /* XXX TBD */ 1967 "Partition or collection contains user objects") }, 1968 /* T */ 1969 { SST(0x2C, 0x0B, SS_RDEF, /* XXX TBD */ 1970 "Not reserved") }, 1971 /* D */ 1972 { SST(0x2C, 0x0C, SS_RDEF, /* XXX TBD */ 1973 "ORWRITE generation does not match") }, 1974 /* D */ 1975 { SST(0x2C, 0x0D, SS_RDEF, /* XXX TBD */ 1976 "Reset write pointer not allowed") }, 1977 /* D */ 1978 { SST(0x2C, 0x0E, SS_RDEF, /* XXX TBD */ 1979 "Zone is offline") }, 1980 /* D */ 1981 { SST(0x2C, 0x0F, SS_RDEF, /* XXX TBD */ 1982 "Stream not open") }, 1983 /* D */ 1984 { SST(0x2C, 0x10, SS_RDEF, /* XXX TBD */ 1985 "Unwritten data in zone") }, 1986 /* T */ 1987 { SST(0x2D, 0x00, SS_RDEF, 1988 "Overwrite error on update in place") }, 1989 /* R */ 1990 { SST(0x2E, 0x00, SS_RDEF, /* XXX TBD */ 1991 "Insufficient time for operation") }, 1992 /* D */ 1993 { SST(0x2E, 0x01, SS_RDEF, /* XXX TBD */ 1994 "Command timeout before processing") }, 1995 /* D */ 1996 { SST(0x2E, 0x02, SS_RDEF, /* XXX TBD */ 1997 "Command timeout during processing") }, 1998 /* D */ 1999 { SST(0x2E, 0x03, SS_RDEF, /* XXX TBD */ 2000 "Command timeout during processing due to error recovery") }, 2001 /* DTLPWROMAEBKVF */ 2002 { SST(0x2F, 0x00, SS_RDEF, 2003 "Commands cleared by another initiator") }, 2004 /* D */ 2005 { SST(0x2F, 0x01, SS_RDEF, /* XXX TBD */ 2006 "Commands cleared by power loss notification") }, 2007 /* DTLPWROMAEBKVF */ 2008 { SST(0x2F, 0x02, SS_RDEF, /* XXX TBD */ 2009 "Commands cleared by device server") }, 2010 /* DTLPWROMAEBKVF */ 2011 { SST(0x2F, 0x03, SS_RDEF, /* XXX TBD */ 2012 "Some commands cleared by queuing layer event") }, 2013 /* DT WROM BK */ 2014 { SST(0x30, 0x00, SS_RDEF, 2015 "Incompatible medium installed") }, 2016 /* DT WRO BK */ 2017 { SST(0x30, 0x01, SS_RDEF, 2018 "Cannot read medium - unknown format") }, 2019 /* DT WRO BK */ 2020 { SST(0x30, 0x02, SS_RDEF, 2021 "Cannot read medium - incompatible format") }, 2022 /* DT R K */ 2023 { SST(0x30, 0x03, SS_RDEF, 2024 "Cleaning cartridge installed") }, 2025 /* DT WRO BK */ 2026 { SST(0x30, 0x04, SS_RDEF, 2027 "Cannot write medium - unknown format") }, 2028 /* DT WRO BK */ 2029 { SST(0x30, 0x05, SS_RDEF, 2030 "Cannot write medium - incompatible format") }, 2031 /* DT WRO B */ 2032 { SST(0x30, 0x06, SS_RDEF, 2033 "Cannot format medium - incompatible medium") }, 2034 /* DTL WROMAEBKVF */ 2035 { SST(0x30, 0x07, SS_RDEF, 2036 "Cleaning failure") }, 2037 /* R */ 2038 { SST(0x30, 0x08, SS_RDEF, 2039 "Cannot write - application code mismatch") }, 2040 /* R */ 2041 { SST(0x30, 0x09, SS_RDEF, 2042 "Current session not fixated for append") }, 2043 /* DT WRO AEBK */ 2044 { SST(0x30, 0x0A, SS_RDEF, /* XXX TBD */ 2045 "Cleaning request rejected") }, 2046 /* T */ 2047 { SST(0x30, 0x0C, SS_RDEF, /* XXX TBD */ 2048 "WORM medium - overwrite attempted") }, 2049 /* T */ 2050 { SST(0x30, 0x0D, SS_RDEF, /* XXX TBD */ 2051 "WORM medium - integrity check") }, 2052 /* R */ 2053 { SST(0x30, 0x10, SS_RDEF, /* XXX TBD */ 2054 "Medium not formatted") }, 2055 /* M */ 2056 { SST(0x30, 0x11, SS_RDEF, /* XXX TBD */ 2057 "Incompatible volume type") }, 2058 /* M */ 2059 { SST(0x30, 0x12, SS_RDEF, /* XXX TBD */ 2060 "Incompatible volume qualifier") }, 2061 /* M */ 2062 { SST(0x30, 0x13, SS_RDEF, /* XXX TBD */ 2063 "Cleaning volume expired") }, 2064 /* DT WRO BK */ 2065 { SST(0x31, 0x00, SS_FATAL | ENXIO, 2066 "Medium format corrupted") }, 2067 /* D L RO B */ 2068 { SST(0x31, 0x01, SS_RDEF, 2069 "Format command failed") }, 2070 /* R */ 2071 { SST(0x31, 0x02, SS_RDEF, /* XXX TBD */ 2072 "Zoned formatting failed due to spare linking") }, 2073 /* D B */ 2074 { SST(0x31, 0x03, SS_FATAL | EIO, 2075 "SANITIZE command failed") }, 2076 /* D W O BK */ 2077 { SST(0x32, 0x00, SS_RDEF, 2078 "No defect spare location available") }, 2079 /* D W O BK */ 2080 { SST(0x32, 0x01, SS_RDEF, 2081 "Defect list update failure") }, 2082 /* T */ 2083 { SST(0x33, 0x00, SS_RDEF, 2084 "Tape length error") }, 2085 /* DTLPWROMAEBKVF */ 2086 { SST(0x34, 0x00, SS_RDEF, 2087 "Enclosure failure") }, 2088 /* DTLPWROMAEBKVF */ 2089 { SST(0x35, 0x00, SS_RDEF, 2090 "Enclosure services failure") }, 2091 /* DTLPWROMAEBKVF */ 2092 { SST(0x35, 0x01, SS_RDEF, 2093 "Unsupported enclosure function") }, 2094 /* DTLPWROMAEBKVF */ 2095 { SST(0x35, 0x02, SS_RDEF, 2096 "Enclosure services unavailable") }, 2097 /* DTLPWROMAEBKVF */ 2098 { SST(0x35, 0x03, SS_RDEF, 2099 "Enclosure services transfer failure") }, 2100 /* DTLPWROMAEBKVF */ 2101 { SST(0x35, 0x04, SS_RDEF, 2102 "Enclosure services transfer refused") }, 2103 /* DTL WROMAEBKVF */ 2104 { SST(0x35, 0x05, SS_RDEF, /* XXX TBD */ 2105 "Enclosure services checksum error") }, 2106 /* L */ 2107 { SST(0x36, 0x00, SS_RDEF, 2108 "Ribbon, ink, or toner failure") }, 2109 /* DTL WROMAEBKVF */ 2110 { SST(0x37, 0x00, SS_RDEF, 2111 "Rounded parameter") }, 2112 /* B */ 2113 { SST(0x38, 0x00, SS_RDEF, /* XXX TBD */ 2114 "Event status notification") }, 2115 /* B */ 2116 { SST(0x38, 0x02, SS_RDEF, /* XXX TBD */ 2117 "ESN - power management class event") }, 2118 /* B */ 2119 { SST(0x38, 0x04, SS_RDEF, /* XXX TBD */ 2120 "ESN - media class event") }, 2121 /* B */ 2122 { SST(0x38, 0x06, SS_RDEF, /* XXX TBD */ 2123 "ESN - device busy class event") }, 2124 /* D */ 2125 { SST(0x38, 0x07, SS_RDEF, /* XXX TBD */ 2126 "Thin provisioning soft threshold reached") }, 2127 /* DTL WROMAE K */ 2128 { SST(0x39, 0x00, SS_RDEF, 2129 "Saving parameters not supported") }, 2130 /* DTL WROM BK */ 2131 { SST(0x3A, 0x00, SS_FATAL | ENXIO, 2132 "Medium not present") }, 2133 /* DT WROM BK */ 2134 { SST(0x3A, 0x01, SS_FATAL | ENXIO, 2135 "Medium not present - tray closed") }, 2136 /* DT WROM BK */ 2137 { SST(0x3A, 0x02, SS_FATAL | ENXIO, 2138 "Medium not present - tray open") }, 2139 /* DT WROM B */ 2140 { SST(0x3A, 0x03, SS_RDEF, /* XXX TBD */ 2141 "Medium not present - loadable") }, 2142 /* DT WRO B */ 2143 { SST(0x3A, 0x04, SS_RDEF, /* XXX TBD */ 2144 "Medium not present - medium auxiliary memory accessible") }, 2145 /* TL */ 2146 { SST(0x3B, 0x00, SS_RDEF, 2147 "Sequential positioning error") }, 2148 /* T */ 2149 { SST(0x3B, 0x01, SS_RDEF, 2150 "Tape position error at beginning-of-medium") }, 2151 /* T */ 2152 { SST(0x3B, 0x02, SS_RDEF, 2153 "Tape position error at end-of-medium") }, 2154 /* L */ 2155 { SST(0x3B, 0x03, SS_RDEF, 2156 "Tape or electronic vertical forms unit not ready") }, 2157 /* L */ 2158 { SST(0x3B, 0x04, SS_RDEF, 2159 "Slew failure") }, 2160 /* L */ 2161 { SST(0x3B, 0x05, SS_RDEF, 2162 "Paper jam") }, 2163 /* L */ 2164 { SST(0x3B, 0x06, SS_RDEF, 2165 "Failed to sense top-of-form") }, 2166 /* L */ 2167 { SST(0x3B, 0x07, SS_RDEF, 2168 "Failed to sense bottom-of-form") }, 2169 /* T */ 2170 { SST(0x3B, 0x08, SS_RDEF, 2171 "Reposition error") }, 2172 /* */ 2173 { SST(0x3B, 0x09, SS_RDEF, 2174 "Read past end of medium") }, 2175 /* */ 2176 { SST(0x3B, 0x0A, SS_RDEF, 2177 "Read past beginning of medium") }, 2178 /* */ 2179 { SST(0x3B, 0x0B, SS_RDEF, 2180 "Position past end of medium") }, 2181 /* T */ 2182 { SST(0x3B, 0x0C, SS_RDEF, 2183 "Position past beginning of medium") }, 2184 /* DT WROM BK */ 2185 { SST(0x3B, 0x0D, SS_FATAL | ENOSPC, 2186 "Medium destination element full") }, 2187 /* DT WROM BK */ 2188 { SST(0x3B, 0x0E, SS_RDEF, 2189 "Medium source element empty") }, 2190 /* R */ 2191 { SST(0x3B, 0x0F, SS_RDEF, 2192 "End of medium reached") }, 2193 /* DT WROM BK */ 2194 { SST(0x3B, 0x11, SS_RDEF, 2195 "Medium magazine not accessible") }, 2196 /* DT WROM BK */ 2197 { SST(0x3B, 0x12, SS_RDEF, 2198 "Medium magazine removed") }, 2199 /* DT WROM BK */ 2200 { SST(0x3B, 0x13, SS_RDEF, 2201 "Medium magazine inserted") }, 2202 /* DT WROM BK */ 2203 { SST(0x3B, 0x14, SS_RDEF, 2204 "Medium magazine locked") }, 2205 /* DT WROM BK */ 2206 { SST(0x3B, 0x15, SS_RDEF, 2207 "Medium magazine unlocked") }, 2208 /* R */ 2209 { SST(0x3B, 0x16, SS_RDEF, /* XXX TBD */ 2210 "Mechanical positioning or changer error") }, 2211 /* F */ 2212 { SST(0x3B, 0x17, SS_RDEF, /* XXX TBD */ 2213 "Read past end of user object") }, 2214 /* M */ 2215 { SST(0x3B, 0x18, SS_RDEF, /* XXX TBD */ 2216 "Element disabled") }, 2217 /* M */ 2218 { SST(0x3B, 0x19, SS_RDEF, /* XXX TBD */ 2219 "Element enabled") }, 2220 /* M */ 2221 { SST(0x3B, 0x1A, SS_RDEF, /* XXX TBD */ 2222 "Data transfer device removed") }, 2223 /* M */ 2224 { SST(0x3B, 0x1B, SS_RDEF, /* XXX TBD */ 2225 "Data transfer device inserted") }, 2226 /* T */ 2227 { SST(0x3B, 0x1C, SS_RDEF, /* XXX TBD */ 2228 "Too many logical objects on partition to support operation") }, 2229 /* DTLPWROMAE K */ 2230 { SST(0x3D, 0x00, SS_RDEF, 2231 "Invalid bits in IDENTIFY message") }, 2232 /* DTLPWROMAEBKVF */ 2233 { SST(0x3E, 0x00, SS_RDEF, 2234 "Logical unit has not self-configured yet") }, 2235 /* DTLPWROMAEBKVF */ 2236 { SST(0x3E, 0x01, SS_RDEF, 2237 "Logical unit failure") }, 2238 /* DTLPWROMAEBKVF */ 2239 { SST(0x3E, 0x02, SS_RDEF, 2240 "Timeout on logical unit") }, 2241 /* DTLPWROMAEBKVF */ 2242 { SST(0x3E, 0x03, SS_RDEF, /* XXX TBD */ 2243 "Logical unit failed self-test") }, 2244 /* DTLPWROMAEBKVF */ 2245 { SST(0x3E, 0x04, SS_RDEF, /* XXX TBD */ 2246 "Logical unit unable to update self-test log") }, 2247 /* DTLPWROMAEBKVF */ 2248 { SST(0x3F, 0x00, SS_RDEF, 2249 "Target operating conditions have changed") }, 2250 /* DTLPWROMAEBKVF */ 2251 { SST(0x3F, 0x01, SS_RDEF, 2252 "Microcode has been changed") }, 2253 /* DTLPWROM BK */ 2254 { SST(0x3F, 0x02, SS_RDEF, 2255 "Changed operating definition") }, 2256 /* DTLPWROMAEBKVF */ 2257 { SST(0x3F, 0x03, SS_RDEF, 2258 "INQUIRY data has changed") }, 2259 /* DT WROMAEBK */ 2260 { SST(0x3F, 0x04, SS_RDEF, 2261 "Component device attached") }, 2262 /* DT WROMAEBK */ 2263 { SST(0x3F, 0x05, SS_RDEF, 2264 "Device identifier changed") }, 2265 /* DT WROMAEB */ 2266 { SST(0x3F, 0x06, SS_RDEF, 2267 "Redundancy group created or modified") }, 2268 /* DT WROMAEB */ 2269 { SST(0x3F, 0x07, SS_RDEF, 2270 "Redundancy group deleted") }, 2271 /* DT WROMAEB */ 2272 { SST(0x3F, 0x08, SS_RDEF, 2273 "Spare created or modified") }, 2274 /* DT WROMAEB */ 2275 { SST(0x3F, 0x09, SS_RDEF, 2276 "Spare deleted") }, 2277 /* DT WROMAEBK */ 2278 { SST(0x3F, 0x0A, SS_RDEF, 2279 "Volume set created or modified") }, 2280 /* DT WROMAEBK */ 2281 { SST(0x3F, 0x0B, SS_RDEF, 2282 "Volume set deleted") }, 2283 /* DT WROMAEBK */ 2284 { SST(0x3F, 0x0C, SS_RDEF, 2285 "Volume set deassigned") }, 2286 /* DT WROMAEBK */ 2287 { SST(0x3F, 0x0D, SS_RDEF, 2288 "Volume set reassigned") }, 2289 /* DTLPWROMAE */ 2290 { SST(0x3F, 0x0E, SS_RDEF | SSQ_RESCAN , 2291 "Reported LUNs data has changed") }, 2292 /* DTLPWROMAEBKVF */ 2293 { SST(0x3F, 0x0F, SS_RDEF, /* XXX TBD */ 2294 "Echo buffer overwritten") }, 2295 /* DT WROM B */ 2296 { SST(0x3F, 0x10, SS_RDEF, /* XXX TBD */ 2297 "Medium loadable") }, 2298 /* DT WROM B */ 2299 { SST(0x3F, 0x11, SS_RDEF, /* XXX TBD */ 2300 "Medium auxiliary memory accessible") }, 2301 /* DTLPWR MAEBK F */ 2302 { SST(0x3F, 0x12, SS_RDEF, /* XXX TBD */ 2303 "iSCSI IP address added") }, 2304 /* DTLPWR MAEBK F */ 2305 { SST(0x3F, 0x13, SS_RDEF, /* XXX TBD */ 2306 "iSCSI IP address removed") }, 2307 /* DTLPWR MAEBK F */ 2308 { SST(0x3F, 0x14, SS_RDEF, /* XXX TBD */ 2309 "iSCSI IP address changed") }, 2310 /* DTLPWR MAEBK */ 2311 { SST(0x3F, 0x15, SS_RDEF, /* XXX TBD */ 2312 "Inspect referrals sense descriptors") }, 2313 /* DTLPWROMAEBKVF */ 2314 { SST(0x3F, 0x16, SS_RDEF, /* XXX TBD */ 2315 "Microcode has been changed without reset") }, 2316 /* D */ 2317 { SST(0x3F, 0x17, SS_RDEF, /* XXX TBD */ 2318 "Zone transition to full") }, 2319 /* D */ 2320 { SST(0x40, 0x00, SS_RDEF, 2321 "RAM failure") }, /* deprecated - use 40 NN instead */ 2322 /* DTLPWROMAEBKVF */ 2323 { SST(0x40, 0x80, SS_RDEF, 2324 "Diagnostic failure: ASCQ = Component ID") }, 2325 /* DTLPWROMAEBKVF */ 2326 { SST(0x40, 0xFF, SS_RDEF | SSQ_RANGE, 2327 NULL) }, /* Range 0x80->0xFF */ 2328 /* D */ 2329 { SST(0x41, 0x00, SS_RDEF, 2330 "Data path failure") }, /* deprecated - use 40 NN instead */ 2331 /* D */ 2332 { SST(0x42, 0x00, SS_RDEF, 2333 "Power-on or self-test failure") }, 2334 /* deprecated - use 40 NN instead */ 2335 /* DTLPWROMAEBKVF */ 2336 { SST(0x43, 0x00, SS_RDEF, 2337 "Message error") }, 2338 /* DTLPWROMAEBKVF */ 2339 { SST(0x44, 0x00, SS_FATAL | EIO, 2340 "Internal target failure") }, 2341 /* DT P MAEBKVF */ 2342 { SST(0x44, 0x01, SS_RDEF, /* XXX TBD */ 2343 "Persistent reservation information lost") }, 2344 /* DT B */ 2345 { SST(0x44, 0x71, SS_RDEF, /* XXX TBD */ 2346 "ATA device failed set features") }, 2347 /* DTLPWROMAEBKVF */ 2348 { SST(0x45, 0x00, SS_RDEF, 2349 "Select or reselect failure") }, 2350 /* DTLPWROM BK */ 2351 { SST(0x46, 0x00, SS_RDEF, 2352 "Unsuccessful soft reset") }, 2353 /* DTLPWROMAEBKVF */ 2354 { SST(0x47, 0x00, SS_RDEF, 2355 "SCSI parity error") }, 2356 /* DTLPWROMAEBKVF */ 2357 { SST(0x47, 0x01, SS_RDEF, /* XXX TBD */ 2358 "Data phase CRC error detected") }, 2359 /* DTLPWROMAEBKVF */ 2360 { SST(0x47, 0x02, SS_RDEF, /* XXX TBD */ 2361 "SCSI parity error detected during ST data phase") }, 2362 /* DTLPWROMAEBKVF */ 2363 { SST(0x47, 0x03, SS_RDEF, /* XXX TBD */ 2364 "Information unit iuCRC error detected") }, 2365 /* DTLPWROMAEBKVF */ 2366 { SST(0x47, 0x04, SS_RDEF, /* XXX TBD */ 2367 "Asynchronous information protection error detected") }, 2368 /* DTLPWROMAEBKVF */ 2369 { SST(0x47, 0x05, SS_RDEF, /* XXX TBD */ 2370 "Protocol service CRC error") }, 2371 /* DT MAEBKVF */ 2372 { SST(0x47, 0x06, SS_RDEF, /* XXX TBD */ 2373 "PHY test function in progress") }, 2374 /* DT PWROMAEBK */ 2375 { SST(0x47, 0x7F, SS_RDEF, /* XXX TBD */ 2376 "Some commands cleared by iSCSI protocol event") }, 2377 /* DTLPWROMAEBKVF */ 2378 { SST(0x48, 0x00, SS_RDEF, 2379 "Initiator detected error message received") }, 2380 /* DTLPWROMAEBKVF */ 2381 { SST(0x49, 0x00, SS_RDEF, 2382 "Invalid message error") }, 2383 /* DTLPWROMAEBKVF */ 2384 { SST(0x4A, 0x00, SS_RDEF, 2385 "Command phase error") }, 2386 /* DTLPWROMAEBKVF */ 2387 { SST(0x4B, 0x00, SS_RDEF, 2388 "Data phase error") }, 2389 /* DT PWROMAEBK */ 2390 { SST(0x4B, 0x01, SS_RDEF, /* XXX TBD */ 2391 "Invalid target port transfer tag received") }, 2392 /* DT PWROMAEBK */ 2393 { SST(0x4B, 0x02, SS_RDEF, /* XXX TBD */ 2394 "Too much write data") }, 2395 /* DT PWROMAEBK */ 2396 { SST(0x4B, 0x03, SS_RDEF, /* XXX TBD */ 2397 "ACK/NAK timeout") }, 2398 /* DT PWROMAEBK */ 2399 { SST(0x4B, 0x04, SS_RDEF, /* XXX TBD */ 2400 "NAK received") }, 2401 /* DT PWROMAEBK */ 2402 { SST(0x4B, 0x05, SS_RDEF, /* XXX TBD */ 2403 "Data offset error") }, 2404 /* DT PWROMAEBK */ 2405 { SST(0x4B, 0x06, SS_RDEF, /* XXX TBD */ 2406 "Initiator response timeout") }, 2407 /* DT PWROMAEBK F */ 2408 { SST(0x4B, 0x07, SS_RDEF, /* XXX TBD */ 2409 "Connection lost") }, 2410 /* DT PWROMAEBK F */ 2411 { SST(0x4B, 0x08, SS_RDEF, /* XXX TBD */ 2412 "Data-in buffer overflow - data buffer size") }, 2413 /* DT PWROMAEBK F */ 2414 { SST(0x4B, 0x09, SS_RDEF, /* XXX TBD */ 2415 "Data-in buffer overflow - data buffer descriptor area") }, 2416 /* DT PWROMAEBK F */ 2417 { SST(0x4B, 0x0A, SS_RDEF, /* XXX TBD */ 2418 "Data-in buffer error") }, 2419 /* DT PWROMAEBK F */ 2420 { SST(0x4B, 0x0B, SS_RDEF, /* XXX TBD */ 2421 "Data-out buffer overflow - data buffer size") }, 2422 /* DT PWROMAEBK F */ 2423 { SST(0x4B, 0x0C, SS_RDEF, /* XXX TBD */ 2424 "Data-out buffer overflow - data buffer descriptor area") }, 2425 /* DT PWROMAEBK F */ 2426 { SST(0x4B, 0x0D, SS_RDEF, /* XXX TBD */ 2427 "Data-out buffer error") }, 2428 /* DT PWROMAEBK F */ 2429 { SST(0x4B, 0x0E, SS_RDEF, /* XXX TBD */ 2430 "PCIe fabric error") }, 2431 /* DT PWROMAEBK F */ 2432 { SST(0x4B, 0x0F, SS_RDEF, /* XXX TBD */ 2433 "PCIe completion timeout") }, 2434 /* DT PWROMAEBK F */ 2435 { SST(0x4B, 0x10, SS_RDEF, /* XXX TBD */ 2436 "PCIe completer abort") }, 2437 /* DT PWROMAEBK F */ 2438 { SST(0x4B, 0x11, SS_RDEF, /* XXX TBD */ 2439 "PCIe poisoned TLP received") }, 2440 /* DT PWROMAEBK F */ 2441 { SST(0x4B, 0x12, SS_RDEF, /* XXX TBD */ 2442 "PCIe ECRC check failed") }, 2443 /* DT PWROMAEBK F */ 2444 { SST(0x4B, 0x13, SS_RDEF, /* XXX TBD */ 2445 "PCIe unsupported request") }, 2446 /* DT PWROMAEBK F */ 2447 { SST(0x4B, 0x14, SS_RDEF, /* XXX TBD */ 2448 "PCIe ACS violation") }, 2449 /* DT PWROMAEBK F */ 2450 { SST(0x4B, 0x15, SS_RDEF, /* XXX TBD */ 2451 "PCIe TLP prefix blocket") }, 2452 /* DTLPWROMAEBKVF */ 2453 { SST(0x4C, 0x00, SS_RDEF, 2454 "Logical unit failed self-configuration") }, 2455 /* DTLPWROMAEBKVF */ 2456 { SST(0x4D, 0x00, SS_RDEF, 2457 "Tagged overlapped commands: ASCQ = Queue tag ID") }, 2458 /* DTLPWROMAEBKVF */ 2459 { SST(0x4D, 0xFF, SS_RDEF | SSQ_RANGE, 2460 NULL) }, /* Range 0x00->0xFF */ 2461 /* DTLPWROMAEBKVF */ 2462 { SST(0x4E, 0x00, SS_RDEF, 2463 "Overlapped commands attempted") }, 2464 /* T */ 2465 { SST(0x50, 0x00, SS_RDEF, 2466 "Write append error") }, 2467 /* T */ 2468 { SST(0x50, 0x01, SS_RDEF, 2469 "Write append position error") }, 2470 /* T */ 2471 { SST(0x50, 0x02, SS_RDEF, 2472 "Position error related to timing") }, 2473 /* T RO */ 2474 { SST(0x51, 0x00, SS_RDEF, 2475 "Erase failure") }, 2476 /* R */ 2477 { SST(0x51, 0x01, SS_RDEF, /* XXX TBD */ 2478 "Erase failure - incomplete erase operation detected") }, 2479 /* T */ 2480 { SST(0x52, 0x00, SS_RDEF, 2481 "Cartridge fault") }, 2482 /* DTL WROM BK */ 2483 { SST(0x53, 0x00, SS_RDEF, 2484 "Media load or eject failed") }, 2485 /* T */ 2486 { SST(0x53, 0x01, SS_RDEF, 2487 "Unload tape failure") }, 2488 /* DT WROM BK */ 2489 { SST(0x53, 0x02, SS_RDEF, 2490 "Medium removal prevented") }, 2491 /* M */ 2492 { SST(0x53, 0x03, SS_RDEF, /* XXX TBD */ 2493 "Medium removal prevented by data transfer element") }, 2494 /* T */ 2495 { SST(0x53, 0x04, SS_RDEF, /* XXX TBD */ 2496 "Medium thread or unthread failure") }, 2497 /* M */ 2498 { SST(0x53, 0x05, SS_RDEF, /* XXX TBD */ 2499 "Volume identifier invalid") }, 2500 /* T */ 2501 { SST(0x53, 0x06, SS_RDEF, /* XXX TBD */ 2502 "Volume identifier missing") }, 2503 /* M */ 2504 { SST(0x53, 0x07, SS_RDEF, /* XXX TBD */ 2505 "Duplicate volume identifier") }, 2506 /* M */ 2507 { SST(0x53, 0x08, SS_RDEF, /* XXX TBD */ 2508 "Element status unknown") }, 2509 /* M */ 2510 { SST(0x53, 0x09, SS_RDEF, /* XXX TBD */ 2511 "Data transfer device error - load failed") }, 2512 /* M */ 2513 { SST(0x53, 0x0A, SS_RDEF, /* XXX TBD */ 2514 "Data transfer device error - unload failed") }, 2515 /* M */ 2516 { SST(0x53, 0x0B, SS_RDEF, /* XXX TBD */ 2517 "Data transfer device error - unload missing") }, 2518 /* M */ 2519 { SST(0x53, 0x0C, SS_RDEF, /* XXX TBD */ 2520 "Data transfer device error - eject failed") }, 2521 /* M */ 2522 { SST(0x53, 0x0D, SS_RDEF, /* XXX TBD */ 2523 "Data transfer device error - library communication failed") }, 2524 /* P */ 2525 { SST(0x54, 0x00, SS_RDEF, 2526 "SCSI to host system interface failure") }, 2527 /* P */ 2528 { SST(0x55, 0x00, SS_RDEF, 2529 "System resource failure") }, 2530 /* D O BK */ 2531 { SST(0x55, 0x01, SS_FATAL | ENOSPC, 2532 "System buffer full") }, 2533 /* DTLPWROMAE K */ 2534 { SST(0x55, 0x02, SS_RDEF, /* XXX TBD */ 2535 "Insufficient reservation resources") }, 2536 /* DTLPWROMAE K */ 2537 { SST(0x55, 0x03, SS_RDEF, /* XXX TBD */ 2538 "Insufficient resources") }, 2539 /* DTLPWROMAE K */ 2540 { SST(0x55, 0x04, SS_RDEF, /* XXX TBD */ 2541 "Insufficient registration resources") }, 2542 /* DT PWROMAEBK */ 2543 { SST(0x55, 0x05, SS_RDEF, /* XXX TBD */ 2544 "Insufficient access control resources") }, 2545 /* DT WROM B */ 2546 { SST(0x55, 0x06, SS_RDEF, /* XXX TBD */ 2547 "Auxiliary memory out of space") }, 2548 /* F */ 2549 { SST(0x55, 0x07, SS_RDEF, /* XXX TBD */ 2550 "Quota error") }, 2551 /* T */ 2552 { SST(0x55, 0x08, SS_RDEF, /* XXX TBD */ 2553 "Maximum number of supplemental decryption keys exceeded") }, 2554 /* M */ 2555 { SST(0x55, 0x09, SS_RDEF, /* XXX TBD */ 2556 "Medium auxiliary memory not accessible") }, 2557 /* M */ 2558 { SST(0x55, 0x0A, SS_RDEF, /* XXX TBD */ 2559 "Data currently unavailable") }, 2560 /* DTLPWROMAEBKVF */ 2561 { SST(0x55, 0x0B, SS_RDEF, /* XXX TBD */ 2562 "Insufficient power for operation") }, 2563 /* DT P B */ 2564 { SST(0x55, 0x0C, SS_RDEF, /* XXX TBD */ 2565 "Insufficient resources to create ROD") }, 2566 /* DT P B */ 2567 { SST(0x55, 0x0D, SS_RDEF, /* XXX TBD */ 2568 "Insufficient resources to create ROD token") }, 2569 /* D */ 2570 { SST(0x55, 0x0E, SS_RDEF, /* XXX TBD */ 2571 "Insufficient zone resources") }, 2572 /* D */ 2573 { SST(0x55, 0x0F, SS_RDEF, /* XXX TBD */ 2574 "Insufficient zone resources to complete write") }, 2575 /* D */ 2576 { SST(0x55, 0x10, SS_RDEF, /* XXX TBD */ 2577 "Maximum number of streams open") }, 2578 /* R */ 2579 { SST(0x57, 0x00, SS_RDEF, 2580 "Unable to recover table-of-contents") }, 2581 /* O */ 2582 { SST(0x58, 0x00, SS_RDEF, 2583 "Generation does not exist") }, 2584 /* O */ 2585 { SST(0x59, 0x00, SS_RDEF, 2586 "Updated block read") }, 2587 /* DTLPWRO BK */ 2588 { SST(0x5A, 0x00, SS_RDEF, 2589 "Operator request or state change input") }, 2590 /* DT WROM BK */ 2591 { SST(0x5A, 0x01, SS_RDEF, 2592 "Operator medium removal request") }, 2593 /* DT WRO A BK */ 2594 { SST(0x5A, 0x02, SS_RDEF, 2595 "Operator selected write protect") }, 2596 /* DT WRO A BK */ 2597 { SST(0x5A, 0x03, SS_RDEF, 2598 "Operator selected write permit") }, 2599 /* DTLPWROM K */ 2600 { SST(0x5B, 0x00, SS_RDEF, 2601 "Log exception") }, 2602 /* DTLPWROM K */ 2603 { SST(0x5B, 0x01, SS_RDEF, 2604 "Threshold condition met") }, 2605 /* DTLPWROM K */ 2606 { SST(0x5B, 0x02, SS_RDEF, 2607 "Log counter at maximum") }, 2608 /* DTLPWROM K */ 2609 { SST(0x5B, 0x03, SS_RDEF, 2610 "Log list codes exhausted") }, 2611 /* D O */ 2612 { SST(0x5C, 0x00, SS_RDEF, 2613 "RPL status change") }, 2614 /* D O */ 2615 { SST(0x5C, 0x01, SS_NOP | SSQ_PRINT_SENSE, 2616 "Spindles synchronized") }, 2617 /* D O */ 2618 { SST(0x5C, 0x02, SS_RDEF, 2619 "Spindles not synchronized") }, 2620 /* DTLPWROMAEBKVF */ 2621 { SST(0x5D, 0x00, SS_NOP | SSQ_PRINT_SENSE, 2622 "Failure prediction threshold exceeded") }, 2623 /* R B */ 2624 { SST(0x5D, 0x01, SS_NOP | SSQ_PRINT_SENSE, 2625 "Media failure prediction threshold exceeded") }, 2626 /* R */ 2627 { SST(0x5D, 0x02, SS_NOP | SSQ_PRINT_SENSE, 2628 "Logical unit failure prediction threshold exceeded") }, 2629 /* R */ 2630 { SST(0x5D, 0x03, SS_NOP | SSQ_PRINT_SENSE, 2631 "Spare area exhaustion prediction threshold exceeded") }, 2632 /* D B */ 2633 { SST(0x5D, 0x10, SS_NOP | SSQ_PRINT_SENSE, 2634 "Hardware impending failure general hard drive failure") }, 2635 /* D B */ 2636 { SST(0x5D, 0x11, SS_NOP | SSQ_PRINT_SENSE, 2637 "Hardware impending failure drive error rate too high") }, 2638 /* D B */ 2639 { SST(0x5D, 0x12, SS_NOP | SSQ_PRINT_SENSE, 2640 "Hardware impending failure data error rate too high") }, 2641 /* D B */ 2642 { SST(0x5D, 0x13, SS_NOP | SSQ_PRINT_SENSE, 2643 "Hardware impending failure seek error rate too high") }, 2644 /* D B */ 2645 { SST(0x5D, 0x14, SS_NOP | SSQ_PRINT_SENSE, 2646 "Hardware impending failure too many block reassigns") }, 2647 /* D B */ 2648 { SST(0x5D, 0x15, SS_NOP | SSQ_PRINT_SENSE, 2649 "Hardware impending failure access times too high") }, 2650 /* D B */ 2651 { SST(0x5D, 0x16, SS_NOP | SSQ_PRINT_SENSE, 2652 "Hardware impending failure start unit times too high") }, 2653 /* D B */ 2654 { SST(0x5D, 0x17, SS_NOP | SSQ_PRINT_SENSE, 2655 "Hardware impending failure channel parametrics") }, 2656 /* D B */ 2657 { SST(0x5D, 0x18, SS_NOP | SSQ_PRINT_SENSE, 2658 "Hardware impending failure controller detected") }, 2659 /* D B */ 2660 { SST(0x5D, 0x19, SS_NOP | SSQ_PRINT_SENSE, 2661 "Hardware impending failure throughput performance") }, 2662 /* D B */ 2663 { SST(0x5D, 0x1A, SS_NOP | SSQ_PRINT_SENSE, 2664 "Hardware impending failure seek time performance") }, 2665 /* D B */ 2666 { SST(0x5D, 0x1B, SS_NOP | SSQ_PRINT_SENSE, 2667 "Hardware impending failure spin-up retry count") }, 2668 /* D B */ 2669 { SST(0x5D, 0x1C, SS_NOP | SSQ_PRINT_SENSE, 2670 "Hardware impending failure drive calibration retry count") }, 2671 /* D B */ 2672 { SST(0x5D, 0x1D, SS_NOP | SSQ_PRINT_SENSE, 2673 "Hardware impending failure power loss protection circuit") }, 2674 /* D B */ 2675 { SST(0x5D, 0x20, SS_NOP | SSQ_PRINT_SENSE, 2676 "Controller impending failure general hard drive failure") }, 2677 /* D B */ 2678 { SST(0x5D, 0x21, SS_NOP | SSQ_PRINT_SENSE, 2679 "Controller impending failure drive error rate too high") }, 2680 /* D B */ 2681 { SST(0x5D, 0x22, SS_NOP | SSQ_PRINT_SENSE, 2682 "Controller impending failure data error rate too high") }, 2683 /* D B */ 2684 { SST(0x5D, 0x23, SS_NOP | SSQ_PRINT_SENSE, 2685 "Controller impending failure seek error rate too high") }, 2686 /* D B */ 2687 { SST(0x5D, 0x24, SS_NOP | SSQ_PRINT_SENSE, 2688 "Controller impending failure too many block reassigns") }, 2689 /* D B */ 2690 { SST(0x5D, 0x25, SS_NOP | SSQ_PRINT_SENSE, 2691 "Controller impending failure access times too high") }, 2692 /* D B */ 2693 { SST(0x5D, 0x26, SS_NOP | SSQ_PRINT_SENSE, 2694 "Controller impending failure start unit times too high") }, 2695 /* D B */ 2696 { SST(0x5D, 0x27, SS_NOP | SSQ_PRINT_SENSE, 2697 "Controller impending failure channel parametrics") }, 2698 /* D B */ 2699 { SST(0x5D, 0x28, SS_NOP | SSQ_PRINT_SENSE, 2700 "Controller impending failure controller detected") }, 2701 /* D B */ 2702 { SST(0x5D, 0x29, SS_NOP | SSQ_PRINT_SENSE, 2703 "Controller impending failure throughput performance") }, 2704 /* D B */ 2705 { SST(0x5D, 0x2A, SS_NOP | SSQ_PRINT_SENSE, 2706 "Controller impending failure seek time performance") }, 2707 /* D B */ 2708 { SST(0x5D, 0x2B, SS_NOP | SSQ_PRINT_SENSE, 2709 "Controller impending failure spin-up retry count") }, 2710 /* D B */ 2711 { SST(0x5D, 0x2C, SS_NOP | SSQ_PRINT_SENSE, 2712 "Controller impending failure drive calibration retry count") }, 2713 /* D B */ 2714 { SST(0x5D, 0x30, SS_NOP | SSQ_PRINT_SENSE, 2715 "Data channel impending failure general hard drive failure") }, 2716 /* D B */ 2717 { SST(0x5D, 0x31, SS_NOP | SSQ_PRINT_SENSE, 2718 "Data channel impending failure drive error rate too high") }, 2719 /* D B */ 2720 { SST(0x5D, 0x32, SS_NOP | SSQ_PRINT_SENSE, 2721 "Data channel impending failure data error rate too high") }, 2722 /* D B */ 2723 { SST(0x5D, 0x33, SS_NOP | SSQ_PRINT_SENSE, 2724 "Data channel impending failure seek error rate too high") }, 2725 /* D B */ 2726 { SST(0x5D, 0x34, SS_NOP | SSQ_PRINT_SENSE, 2727 "Data channel impending failure too many block reassigns") }, 2728 /* D B */ 2729 { SST(0x5D, 0x35, SS_NOP | SSQ_PRINT_SENSE, 2730 "Data channel impending failure access times too high") }, 2731 /* D B */ 2732 { SST(0x5D, 0x36, SS_NOP | SSQ_PRINT_SENSE, 2733 "Data channel impending failure start unit times too high") }, 2734 /* D B */ 2735 { SST(0x5D, 0x37, SS_NOP | SSQ_PRINT_SENSE, 2736 "Data channel impending failure channel parametrics") }, 2737 /* D B */ 2738 { SST(0x5D, 0x38, SS_NOP | SSQ_PRINT_SENSE, 2739 "Data channel impending failure controller detected") }, 2740 /* D B */ 2741 { SST(0x5D, 0x39, SS_NOP | SSQ_PRINT_SENSE, 2742 "Data channel impending failure throughput performance") }, 2743 /* D B */ 2744 { SST(0x5D, 0x3A, SS_NOP | SSQ_PRINT_SENSE, 2745 "Data channel impending failure seek time performance") }, 2746 /* D B */ 2747 { SST(0x5D, 0x3B, SS_NOP | SSQ_PRINT_SENSE, 2748 "Data channel impending failure spin-up retry count") }, 2749 /* D B */ 2750 { SST(0x5D, 0x3C, SS_NOP | SSQ_PRINT_SENSE, 2751 "Data channel impending failure drive calibration retry count") }, 2752 /* D B */ 2753 { SST(0x5D, 0x40, SS_NOP | SSQ_PRINT_SENSE, 2754 "Servo impending failure general hard drive failure") }, 2755 /* D B */ 2756 { SST(0x5D, 0x41, SS_NOP | SSQ_PRINT_SENSE, 2757 "Servo impending failure drive error rate too high") }, 2758 /* D B */ 2759 { SST(0x5D, 0x42, SS_NOP | SSQ_PRINT_SENSE, 2760 "Servo impending failure data error rate too high") }, 2761 /* D B */ 2762 { SST(0x5D, 0x43, SS_NOP | SSQ_PRINT_SENSE, 2763 "Servo impending failure seek error rate too high") }, 2764 /* D B */ 2765 { SST(0x5D, 0x44, SS_NOP | SSQ_PRINT_SENSE, 2766 "Servo impending failure too many block reassigns") }, 2767 /* D B */ 2768 { SST(0x5D, 0x45, SS_NOP | SSQ_PRINT_SENSE, 2769 "Servo impending failure access times too high") }, 2770 /* D B */ 2771 { SST(0x5D, 0x46, SS_NOP | SSQ_PRINT_SENSE, 2772 "Servo impending failure start unit times too high") }, 2773 /* D B */ 2774 { SST(0x5D, 0x47, SS_NOP | SSQ_PRINT_SENSE, 2775 "Servo impending failure channel parametrics") }, 2776 /* D B */ 2777 { SST(0x5D, 0x48, SS_NOP | SSQ_PRINT_SENSE, 2778 "Servo impending failure controller detected") }, 2779 /* D B */ 2780 { SST(0x5D, 0x49, SS_NOP | SSQ_PRINT_SENSE, 2781 "Servo impending failure throughput performance") }, 2782 /* D B */ 2783 { SST(0x5D, 0x4A, SS_NOP | SSQ_PRINT_SENSE, 2784 "Servo impending failure seek time performance") }, 2785 /* D B */ 2786 { SST(0x5D, 0x4B, SS_NOP | SSQ_PRINT_SENSE, 2787 "Servo impending failure spin-up retry count") }, 2788 /* D B */ 2789 { SST(0x5D, 0x4C, SS_NOP | SSQ_PRINT_SENSE, 2790 "Servo impending failure drive calibration retry count") }, 2791 /* D B */ 2792 { SST(0x5D, 0x50, SS_NOP | SSQ_PRINT_SENSE, 2793 "Spindle impending failure general hard drive failure") }, 2794 /* D B */ 2795 { SST(0x5D, 0x51, SS_NOP | SSQ_PRINT_SENSE, 2796 "Spindle impending failure drive error rate too high") }, 2797 /* D B */ 2798 { SST(0x5D, 0x52, SS_NOP | SSQ_PRINT_SENSE, 2799 "Spindle impending failure data error rate too high") }, 2800 /* D B */ 2801 { SST(0x5D, 0x53, SS_NOP | SSQ_PRINT_SENSE, 2802 "Spindle impending failure seek error rate too high") }, 2803 /* D B */ 2804 { SST(0x5D, 0x54, SS_NOP | SSQ_PRINT_SENSE, 2805 "Spindle impending failure too many block reassigns") }, 2806 /* D B */ 2807 { SST(0x5D, 0x55, SS_NOP | SSQ_PRINT_SENSE, 2808 "Spindle impending failure access times too high") }, 2809 /* D B */ 2810 { SST(0x5D, 0x56, SS_NOP | SSQ_PRINT_SENSE, 2811 "Spindle impending failure start unit times too high") }, 2812 /* D B */ 2813 { SST(0x5D, 0x57, SS_NOP | SSQ_PRINT_SENSE, 2814 "Spindle impending failure channel parametrics") }, 2815 /* D B */ 2816 { SST(0x5D, 0x58, SS_NOP | SSQ_PRINT_SENSE, 2817 "Spindle impending failure controller detected") }, 2818 /* D B */ 2819 { SST(0x5D, 0x59, SS_NOP | SSQ_PRINT_SENSE, 2820 "Spindle impending failure throughput performance") }, 2821 /* D B */ 2822 { SST(0x5D, 0x5A, SS_NOP | SSQ_PRINT_SENSE, 2823 "Spindle impending failure seek time performance") }, 2824 /* D B */ 2825 { SST(0x5D, 0x5B, SS_NOP | SSQ_PRINT_SENSE, 2826 "Spindle impending failure spin-up retry count") }, 2827 /* D B */ 2828 { SST(0x5D, 0x5C, SS_NOP | SSQ_PRINT_SENSE, 2829 "Spindle impending failure drive calibration retry count") }, 2830 /* D B */ 2831 { SST(0x5D, 0x60, SS_NOP | SSQ_PRINT_SENSE, 2832 "Firmware impending failure general hard drive failure") }, 2833 /* D B */ 2834 { SST(0x5D, 0x61, SS_NOP | SSQ_PRINT_SENSE, 2835 "Firmware impending failure drive error rate too high") }, 2836 /* D B */ 2837 { SST(0x5D, 0x62, SS_NOP | SSQ_PRINT_SENSE, 2838 "Firmware impending failure data error rate too high") }, 2839 /* D B */ 2840 { SST(0x5D, 0x63, SS_NOP | SSQ_PRINT_SENSE, 2841 "Firmware impending failure seek error rate too high") }, 2842 /* D B */ 2843 { SST(0x5D, 0x64, SS_NOP | SSQ_PRINT_SENSE, 2844 "Firmware impending failure too many block reassigns") }, 2845 /* D B */ 2846 { SST(0x5D, 0x65, SS_NOP | SSQ_PRINT_SENSE, 2847 "Firmware impending failure access times too high") }, 2848 /* D B */ 2849 { SST(0x5D, 0x66, SS_NOP | SSQ_PRINT_SENSE, 2850 "Firmware impending failure start unit times too high") }, 2851 /* D B */ 2852 { SST(0x5D, 0x67, SS_NOP | SSQ_PRINT_SENSE, 2853 "Firmware impending failure channel parametrics") }, 2854 /* D B */ 2855 { SST(0x5D, 0x68, SS_NOP | SSQ_PRINT_SENSE, 2856 "Firmware impending failure controller detected") }, 2857 /* D B */ 2858 { SST(0x5D, 0x69, SS_NOP | SSQ_PRINT_SENSE, 2859 "Firmware impending failure throughput performance") }, 2860 /* D B */ 2861 { SST(0x5D, 0x6A, SS_NOP | SSQ_PRINT_SENSE, 2862 "Firmware impending failure seek time performance") }, 2863 /* D B */ 2864 { SST(0x5D, 0x6B, SS_NOP | SSQ_PRINT_SENSE, 2865 "Firmware impending failure spin-up retry count") }, 2866 /* D B */ 2867 { SST(0x5D, 0x6C, SS_NOP | SSQ_PRINT_SENSE, 2868 "Firmware impending failure drive calibration retry count") }, 2869 /* D B */ 2870 { SST(0x5D, 0x73, SS_NOP | SSQ_PRINT_SENSE, 2871 "Media impending failure endurance limit met") }, 2872 /* DTLPWROMAEBKVF */ 2873 { SST(0x5D, 0xFF, SS_NOP | SSQ_PRINT_SENSE, 2874 "Failure prediction threshold exceeded (false)") }, 2875 /* DTLPWRO A K */ 2876 { SST(0x5E, 0x00, SS_RDEF, 2877 "Low power condition on") }, 2878 /* DTLPWRO A K */ 2879 { SST(0x5E, 0x01, SS_RDEF, 2880 "Idle condition activated by timer") }, 2881 /* DTLPWRO A K */ 2882 { SST(0x5E, 0x02, SS_RDEF, 2883 "Standby condition activated by timer") }, 2884 /* DTLPWRO A K */ 2885 { SST(0x5E, 0x03, SS_RDEF, 2886 "Idle condition activated by command") }, 2887 /* DTLPWRO A K */ 2888 { SST(0x5E, 0x04, SS_RDEF, 2889 "Standby condition activated by command") }, 2890 /* DTLPWRO A K */ 2891 { SST(0x5E, 0x05, SS_RDEF, 2892 "Idle-B condition activated by timer") }, 2893 /* DTLPWRO A K */ 2894 { SST(0x5E, 0x06, SS_RDEF, 2895 "Idle-B condition activated by command") }, 2896 /* DTLPWRO A K */ 2897 { SST(0x5E, 0x07, SS_RDEF, 2898 "Idle-C condition activated by timer") }, 2899 /* DTLPWRO A K */ 2900 { SST(0x5E, 0x08, SS_RDEF, 2901 "Idle-C condition activated by command") }, 2902 /* DTLPWRO A K */ 2903 { SST(0x5E, 0x09, SS_RDEF, 2904 "Standby-Y condition activated by timer") }, 2905 /* DTLPWRO A K */ 2906 { SST(0x5E, 0x0A, SS_RDEF, 2907 "Standby-Y condition activated by command") }, 2908 /* B */ 2909 { SST(0x5E, 0x41, SS_RDEF, /* XXX TBD */ 2910 "Power state change to active") }, 2911 /* B */ 2912 { SST(0x5E, 0x42, SS_RDEF, /* XXX TBD */ 2913 "Power state change to idle") }, 2914 /* B */ 2915 { SST(0x5E, 0x43, SS_RDEF, /* XXX TBD */ 2916 "Power state change to standby") }, 2917 /* B */ 2918 { SST(0x5E, 0x45, SS_RDEF, /* XXX TBD */ 2919 "Power state change to sleep") }, 2920 /* BK */ 2921 { SST(0x5E, 0x47, SS_RDEF, /* XXX TBD */ 2922 "Power state change to device control") }, 2923 /* */ 2924 { SST(0x60, 0x00, SS_RDEF, 2925 "Lamp failure") }, 2926 /* */ 2927 { SST(0x61, 0x00, SS_RDEF, 2928 "Video acquisition error") }, 2929 /* */ 2930 { SST(0x61, 0x01, SS_RDEF, 2931 "Unable to acquire video") }, 2932 /* */ 2933 { SST(0x61, 0x02, SS_RDEF, 2934 "Out of focus") }, 2935 /* */ 2936 { SST(0x62, 0x00, SS_RDEF, 2937 "Scan head positioning error") }, 2938 /* R */ 2939 { SST(0x63, 0x00, SS_RDEF, 2940 "End of user area encountered on this track") }, 2941 /* R */ 2942 { SST(0x63, 0x01, SS_FATAL | ENOSPC, 2943 "Packet does not fit in available space") }, 2944 /* R */ 2945 { SST(0x64, 0x00, SS_FATAL | ENXIO, 2946 "Illegal mode for this track") }, 2947 /* R */ 2948 { SST(0x64, 0x01, SS_RDEF, 2949 "Invalid packet size") }, 2950 /* DTLPWROMAEBKVF */ 2951 { SST(0x65, 0x00, SS_RDEF, 2952 "Voltage fault") }, 2953 /* */ 2954 { SST(0x66, 0x00, SS_RDEF, 2955 "Automatic document feeder cover up") }, 2956 /* */ 2957 { SST(0x66, 0x01, SS_RDEF, 2958 "Automatic document feeder lift up") }, 2959 /* */ 2960 { SST(0x66, 0x02, SS_RDEF, 2961 "Document jam in automatic document feeder") }, 2962 /* */ 2963 { SST(0x66, 0x03, SS_RDEF, 2964 "Document miss feed automatic in document feeder") }, 2965 /* A */ 2966 { SST(0x67, 0x00, SS_RDEF, 2967 "Configuration failure") }, 2968 /* A */ 2969 { SST(0x67, 0x01, SS_RDEF, 2970 "Configuration of incapable logical units failed") }, 2971 /* A */ 2972 { SST(0x67, 0x02, SS_RDEF, 2973 "Add logical unit failed") }, 2974 /* A */ 2975 { SST(0x67, 0x03, SS_RDEF, 2976 "Modification of logical unit failed") }, 2977 /* A */ 2978 { SST(0x67, 0x04, SS_RDEF, 2979 "Exchange of logical unit failed") }, 2980 /* A */ 2981 { SST(0x67, 0x05, SS_RDEF, 2982 "Remove of logical unit failed") }, 2983 /* A */ 2984 { SST(0x67, 0x06, SS_RDEF, 2985 "Attachment of logical unit failed") }, 2986 /* A */ 2987 { SST(0x67, 0x07, SS_RDEF, 2988 "Creation of logical unit failed") }, 2989 /* A */ 2990 { SST(0x67, 0x08, SS_RDEF, /* XXX TBD */ 2991 "Assign failure occurred") }, 2992 /* A */ 2993 { SST(0x67, 0x09, SS_RDEF, /* XXX TBD */ 2994 "Multiply assigned logical unit") }, 2995 /* DTLPWROMAEBKVF */ 2996 { SST(0x67, 0x0A, SS_RDEF, /* XXX TBD */ 2997 "Set target port groups command failed") }, 2998 /* DT B */ 2999 { SST(0x67, 0x0B, SS_RDEF, /* XXX TBD */ 3000 "ATA device feature not enabled") }, 3001 /* A */ 3002 { SST(0x68, 0x00, SS_RDEF, 3003 "Logical unit not configured") }, 3004 /* D */ 3005 { SST(0x68, 0x01, SS_RDEF, 3006 "Subsidiary logical unit not configured") }, 3007 /* A */ 3008 { SST(0x69, 0x00, SS_RDEF, 3009 "Data loss on logical unit") }, 3010 /* A */ 3011 { SST(0x69, 0x01, SS_RDEF, 3012 "Multiple logical unit failures") }, 3013 /* A */ 3014 { SST(0x69, 0x02, SS_RDEF, 3015 "Parity/data mismatch") }, 3016 /* A */ 3017 { SST(0x6A, 0x00, SS_RDEF, 3018 "Informational, refer to log") }, 3019 /* A */ 3020 { SST(0x6B, 0x00, SS_RDEF, 3021 "State change has occurred") }, 3022 /* A */ 3023 { SST(0x6B, 0x01, SS_RDEF, 3024 "Redundancy level got better") }, 3025 /* A */ 3026 { SST(0x6B, 0x02, SS_RDEF, 3027 "Redundancy level got worse") }, 3028 /* A */ 3029 { SST(0x6C, 0x00, SS_RDEF, 3030 "Rebuild failure occurred") }, 3031 /* A */ 3032 { SST(0x6D, 0x00, SS_RDEF, 3033 "Recalculate failure occurred") }, 3034 /* A */ 3035 { SST(0x6E, 0x00, SS_RDEF, 3036 "Command to logical unit failed") }, 3037 /* R */ 3038 { SST(0x6F, 0x00, SS_RDEF, /* XXX TBD */ 3039 "Copy protection key exchange failure - authentication failure") }, 3040 /* R */ 3041 { SST(0x6F, 0x01, SS_RDEF, /* XXX TBD */ 3042 "Copy protection key exchange failure - key not present") }, 3043 /* R */ 3044 { SST(0x6F, 0x02, SS_RDEF, /* XXX TBD */ 3045 "Copy protection key exchange failure - key not established") }, 3046 /* R */ 3047 { SST(0x6F, 0x03, SS_RDEF, /* XXX TBD */ 3048 "Read of scrambled sector without authentication") }, 3049 /* R */ 3050 { SST(0x6F, 0x04, SS_RDEF, /* XXX TBD */ 3051 "Media region code is mismatched to logical unit region") }, 3052 /* R */ 3053 { SST(0x6F, 0x05, SS_RDEF, /* XXX TBD */ 3054 "Drive region must be permanent/region reset count error") }, 3055 /* R */ 3056 { SST(0x6F, 0x06, SS_RDEF, /* XXX TBD */ 3057 "Insufficient block count for binding NONCE recording") }, 3058 /* R */ 3059 { SST(0x6F, 0x07, SS_RDEF, /* XXX TBD */ 3060 "Conflict in binding NONCE recording") }, 3061 /* T */ 3062 { SST(0x70, 0x00, SS_RDEF, 3063 "Decompression exception short: ASCQ = Algorithm ID") }, 3064 /* T */ 3065 { SST(0x70, 0xFF, SS_RDEF | SSQ_RANGE, 3066 NULL) }, /* Range 0x00 -> 0xFF */ 3067 /* T */ 3068 { SST(0x71, 0x00, SS_RDEF, 3069 "Decompression exception long: ASCQ = Algorithm ID") }, 3070 /* T */ 3071 { SST(0x71, 0xFF, SS_RDEF | SSQ_RANGE, 3072 NULL) }, /* Range 0x00 -> 0xFF */ 3073 /* R */ 3074 { SST(0x72, 0x00, SS_RDEF, 3075 "Session fixation error") }, 3076 /* R */ 3077 { SST(0x72, 0x01, SS_RDEF, 3078 "Session fixation error writing lead-in") }, 3079 /* R */ 3080 { SST(0x72, 0x02, SS_RDEF, 3081 "Session fixation error writing lead-out") }, 3082 /* R */ 3083 { SST(0x72, 0x03, SS_RDEF, 3084 "Session fixation error - incomplete track in session") }, 3085 /* R */ 3086 { SST(0x72, 0x04, SS_RDEF, 3087 "Empty or partially written reserved track") }, 3088 /* R */ 3089 { SST(0x72, 0x05, SS_RDEF, /* XXX TBD */ 3090 "No more track reservations allowed") }, 3091 /* R */ 3092 { SST(0x72, 0x06, SS_RDEF, /* XXX TBD */ 3093 "RMZ extension is not allowed") }, 3094 /* R */ 3095 { SST(0x72, 0x07, SS_RDEF, /* XXX TBD */ 3096 "No more test zone extensions are allowed") }, 3097 /* R */ 3098 { SST(0x73, 0x00, SS_RDEF, 3099 "CD control error") }, 3100 /* R */ 3101 { SST(0x73, 0x01, SS_RDEF, 3102 "Power calibration area almost full") }, 3103 /* R */ 3104 { SST(0x73, 0x02, SS_FATAL | ENOSPC, 3105 "Power calibration area is full") }, 3106 /* R */ 3107 { SST(0x73, 0x03, SS_RDEF, 3108 "Power calibration area error") }, 3109 /* R */ 3110 { SST(0x73, 0x04, SS_RDEF, 3111 "Program memory area update failure") }, 3112 /* R */ 3113 { SST(0x73, 0x05, SS_RDEF, 3114 "Program memory area is full") }, 3115 /* R */ 3116 { SST(0x73, 0x06, SS_RDEF, /* XXX TBD */ 3117 "RMA/PMA is almost full") }, 3118 /* R */ 3119 { SST(0x73, 0x10, SS_RDEF, /* XXX TBD */ 3120 "Current power calibration area almost full") }, 3121 /* R */ 3122 { SST(0x73, 0x11, SS_RDEF, /* XXX TBD */ 3123 "Current power calibration area is full") }, 3124 /* R */ 3125 { SST(0x73, 0x17, SS_RDEF, /* XXX TBD */ 3126 "RDZ is full") }, 3127 /* T */ 3128 { SST(0x74, 0x00, SS_RDEF, /* XXX TBD */ 3129 "Security error") }, 3130 /* T */ 3131 { SST(0x74, 0x01, SS_RDEF, /* XXX TBD */ 3132 "Unable to decrypt data") }, 3133 /* T */ 3134 { SST(0x74, 0x02, SS_RDEF, /* XXX TBD */ 3135 "Unencrypted data encountered while decrypting") }, 3136 /* T */ 3137 { SST(0x74, 0x03, SS_RDEF, /* XXX TBD */ 3138 "Incorrect data encryption key") }, 3139 /* T */ 3140 { SST(0x74, 0x04, SS_RDEF, /* XXX TBD */ 3141 "Cryptographic integrity validation failed") }, 3142 /* T */ 3143 { SST(0x74, 0x05, SS_RDEF, /* XXX TBD */ 3144 "Error decrypting data") }, 3145 /* T */ 3146 { SST(0x74, 0x06, SS_RDEF, /* XXX TBD */ 3147 "Unknown signature verification key") }, 3148 /* T */ 3149 { SST(0x74, 0x07, SS_RDEF, /* XXX TBD */ 3150 "Encryption parameters not useable") }, 3151 /* DT R M E VF */ 3152 { SST(0x74, 0x08, SS_RDEF, /* XXX TBD */ 3153 "Digital signature validation failure") }, 3154 /* T */ 3155 { SST(0x74, 0x09, SS_RDEF, /* XXX TBD */ 3156 "Encryption mode mismatch on read") }, 3157 /* T */ 3158 { SST(0x74, 0x0A, SS_RDEF, /* XXX TBD */ 3159 "Encrypted block not raw read enabled") }, 3160 /* T */ 3161 { SST(0x74, 0x0B, SS_RDEF, /* XXX TBD */ 3162 "Incorrect encryption parameters") }, 3163 /* DT R MAEBKV */ 3164 { SST(0x74, 0x0C, SS_RDEF, /* XXX TBD */ 3165 "Unable to decrypt parameter list") }, 3166 /* T */ 3167 { SST(0x74, 0x0D, SS_RDEF, /* XXX TBD */ 3168 "Encryption algorithm disabled") }, 3169 /* DT R MAEBKV */ 3170 { SST(0x74, 0x10, SS_RDEF, /* XXX TBD */ 3171 "SA creation parameter value invalid") }, 3172 /* DT R MAEBKV */ 3173 { SST(0x74, 0x11, SS_RDEF, /* XXX TBD */ 3174 "SA creation parameter value rejected") }, 3175 /* DT R MAEBKV */ 3176 { SST(0x74, 0x12, SS_RDEF, /* XXX TBD */ 3177 "Invalid SA usage") }, 3178 /* T */ 3179 { SST(0x74, 0x21, SS_RDEF, /* XXX TBD */ 3180 "Data encryption configuration prevented") }, 3181 /* DT R MAEBKV */ 3182 { SST(0x74, 0x30, SS_RDEF, /* XXX TBD */ 3183 "SA creation parameter not supported") }, 3184 /* DT R MAEBKV */ 3185 { SST(0x74, 0x40, SS_RDEF, /* XXX TBD */ 3186 "Authentication failed") }, 3187 /* V */ 3188 { SST(0x74, 0x61, SS_RDEF, /* XXX TBD */ 3189 "External data encryption key manager access error") }, 3190 /* V */ 3191 { SST(0x74, 0x62, SS_RDEF, /* XXX TBD */ 3192 "External data encryption key manager error") }, 3193 /* V */ 3194 { SST(0x74, 0x63, SS_RDEF, /* XXX TBD */ 3195 "External data encryption key not found") }, 3196 /* V */ 3197 { SST(0x74, 0x64, SS_RDEF, /* XXX TBD */ 3198 "External data encryption request not authorized") }, 3199 /* T */ 3200 { SST(0x74, 0x6E, SS_RDEF, /* XXX TBD */ 3201 "External data encryption control timeout") }, 3202 /* T */ 3203 { SST(0x74, 0x6F, SS_RDEF, /* XXX TBD */ 3204 "External data encryption control error") }, 3205 /* DT R M E V */ 3206 { SST(0x74, 0x71, SS_FATAL | EACCES, 3207 "Logical unit access not authorized") }, 3208 /* D */ 3209 { SST(0x74, 0x79, SS_FATAL | EACCES, 3210 "Security conflict in translated device") } 3211}; 3212 3213const u_int asc_table_size = nitems(asc_table); 3214 3215struct asc_key 3216{ 3217 int asc; 3218 int ascq; 3219}; 3220 3221static int 3222ascentrycomp(const void *key, const void *member) 3223{ 3224 int asc; 3225 int ascq; 3226 const struct asc_table_entry *table_entry; 3227 3228 asc = ((const struct asc_key *)key)->asc; 3229 ascq = ((const struct asc_key *)key)->ascq; 3230 table_entry = (const struct asc_table_entry *)member; 3231 3232 if (asc >= table_entry->asc) { 3233 3234 if (asc > table_entry->asc) 3235 return (1); 3236 3237 if (ascq <= table_entry->ascq) { 3238 /* Check for ranges */ 3239 if (ascq == table_entry->ascq 3240 || ((table_entry->action & SSQ_RANGE) != 0 3241 && ascq >= (table_entry - 1)->ascq)) 3242 return (0); 3243 return (-1); 3244 } 3245 return (1); 3246 } 3247 return (-1); 3248} 3249 3250static int 3251senseentrycomp(const void *key, const void *member) 3252{ 3253 int sense_key; 3254 const struct sense_key_table_entry *table_entry; 3255 3256 sense_key = *((const int *)key); 3257 table_entry = (const struct sense_key_table_entry *)member; 3258 3259 if (sense_key >= table_entry->sense_key) { 3260 if (sense_key == table_entry->sense_key) 3261 return (0); 3262 return (1); 3263 } 3264 return (-1); 3265} 3266 3267static void 3268fetchtableentries(int sense_key, int asc, int ascq, 3269 struct scsi_inquiry_data *inq_data, 3270 const struct sense_key_table_entry **sense_entry, 3271 const struct asc_table_entry **asc_entry) 3272{ 3273 caddr_t match; 3274 const struct asc_table_entry *asc_tables[2]; 3275 const struct sense_key_table_entry *sense_tables[2]; 3276 struct asc_key asc_ascq; 3277 size_t asc_tables_size[2]; 3278 size_t sense_tables_size[2]; 3279 int num_asc_tables; 3280 int num_sense_tables; 3281 int i; 3282 3283 /* Default to failure */ 3284 *sense_entry = NULL; 3285 *asc_entry = NULL; 3286 match = NULL; 3287 if (inq_data != NULL) 3288 match = cam_quirkmatch((caddr_t)inq_data, 3289 (caddr_t)sense_quirk_table, 3290 sense_quirk_table_size, 3291 sizeof(*sense_quirk_table), 3292 scsi_inquiry_match); 3293 3294 if (match != NULL) { 3295 struct scsi_sense_quirk_entry *quirk; 3296 3297 quirk = (struct scsi_sense_quirk_entry *)match; 3298 asc_tables[0] = quirk->asc_info; 3299 asc_tables_size[0] = quirk->num_ascs; 3300 asc_tables[1] = asc_table; 3301 asc_tables_size[1] = asc_table_size; 3302 num_asc_tables = 2; 3303 sense_tables[0] = quirk->sense_key_info; 3304 sense_tables_size[0] = quirk->num_sense_keys; 3305 sense_tables[1] = sense_key_table; 3306 sense_tables_size[1] = nitems(sense_key_table); 3307 num_sense_tables = 2; 3308 } else { 3309 asc_tables[0] = asc_table; 3310 asc_tables_size[0] = asc_table_size; 3311 num_asc_tables = 1; 3312 sense_tables[0] = sense_key_table; 3313 sense_tables_size[0] = nitems(sense_key_table); 3314 num_sense_tables = 1; 3315 } 3316 3317 asc_ascq.asc = asc; 3318 asc_ascq.ascq = ascq; 3319 for (i = 0; i < num_asc_tables; i++) { 3320 void *found_entry; 3321 3322 found_entry = bsearch(&asc_ascq, asc_tables[i], 3323 asc_tables_size[i], 3324 sizeof(**asc_tables), 3325 ascentrycomp); 3326 3327 if (found_entry) { 3328 *asc_entry = (struct asc_table_entry *)found_entry; 3329 break; 3330 } 3331 } 3332 3333 for (i = 0; i < num_sense_tables; i++) { 3334 void *found_entry; 3335 3336 found_entry = bsearch(&sense_key, sense_tables[i], 3337 sense_tables_size[i], 3338 sizeof(**sense_tables), 3339 senseentrycomp); 3340 3341 if (found_entry) { 3342 *sense_entry = 3343 (struct sense_key_table_entry *)found_entry; 3344 break; 3345 } 3346 } 3347} 3348 3349void 3350scsi_sense_desc(int sense_key, int asc, int ascq, 3351 struct scsi_inquiry_data *inq_data, 3352 const char **sense_key_desc, const char **asc_desc) 3353{ 3354 const struct asc_table_entry *asc_entry; 3355 const struct sense_key_table_entry *sense_entry; 3356 3357 fetchtableentries(sense_key, asc, ascq, 3358 inq_data, 3359 &sense_entry, 3360 &asc_entry); 3361 3362 if (sense_entry != NULL) 3363 *sense_key_desc = sense_entry->desc; 3364 else 3365 *sense_key_desc = "Invalid Sense Key"; 3366 3367 if (asc_entry != NULL) 3368 *asc_desc = asc_entry->desc; 3369 else if (asc >= 0x80 && asc <= 0xff) 3370 *asc_desc = "Vendor Specific ASC"; 3371 else if (ascq >= 0x80 && ascq <= 0xff) 3372 *asc_desc = "Vendor Specific ASCQ"; 3373 else 3374 *asc_desc = "Reserved ASC/ASCQ pair"; 3375} 3376 3377/* 3378 * Given sense and device type information, return the appropriate action. 3379 * If we do not understand the specific error as identified by the ASC/ASCQ 3380 * pair, fall back on the more generic actions derived from the sense key. 3381 */ 3382scsi_sense_action 3383scsi_error_action(struct ccb_scsiio *csio, struct scsi_inquiry_data *inq_data, 3384 u_int32_t sense_flags) 3385{ 3386 const struct asc_table_entry *asc_entry; 3387 const struct sense_key_table_entry *sense_entry; 3388 int error_code, sense_key, asc, ascq; 3389 scsi_sense_action action; 3390 3391 if (!scsi_extract_sense_ccb((union ccb *)csio, 3392 &error_code, &sense_key, &asc, &ascq)) { 3393 action = SS_RDEF; 3394 } else if ((error_code == SSD_DEFERRED_ERROR) 3395 || (error_code == SSD_DESC_DEFERRED_ERROR)) { 3396 /* 3397 * XXX dufault@FreeBSD.org 3398 * This error doesn't relate to the command associated 3399 * with this request sense. A deferred error is an error 3400 * for a command that has already returned GOOD status 3401 * (see SCSI2 8.2.14.2). 3402 * 3403 * By my reading of that section, it looks like the current 3404 * command has been cancelled, we should now clean things up 3405 * (hopefully recovering any lost data) and then retry the 3406 * current command. There are two easy choices, both wrong: 3407 * 3408 * 1. Drop through (like we had been doing), thus treating 3409 * this as if the error were for the current command and 3410 * return and stop the current command. 3411 * 3412 * 2. Issue a retry (like I made it do) thus hopefully 3413 * recovering the current transfer, and ignoring the 3414 * fact that we've dropped a command. 3415 * 3416 * These should probably be handled in a device specific 3417 * sense handler or punted back up to a user mode daemon 3418 */ 3419 action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE; 3420 } else { 3421 fetchtableentries(sense_key, asc, ascq, 3422 inq_data, 3423 &sense_entry, 3424 &asc_entry); 3425 3426 /* 3427 * Override the 'No additional Sense' entry (0,0) 3428 * with the error action of the sense key. 3429 */ 3430 if (asc_entry != NULL 3431 && (asc != 0 || ascq != 0)) 3432 action = asc_entry->action; 3433 else if (sense_entry != NULL) 3434 action = sense_entry->action; 3435 else 3436 action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE; 3437 3438 if (sense_key == SSD_KEY_RECOVERED_ERROR) { 3439 /* 3440 * The action succeeded but the device wants 3441 * the user to know that some recovery action 3442 * was required. 3443 */ 3444 action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK); 3445 action |= SS_NOP|SSQ_PRINT_SENSE; 3446 } else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) { 3447 if ((sense_flags & SF_QUIET_IR) != 0) 3448 action &= ~SSQ_PRINT_SENSE; 3449 } else if (sense_key == SSD_KEY_UNIT_ATTENTION) { 3450 if ((sense_flags & SF_RETRY_UA) != 0 3451 && (action & SS_MASK) == SS_FAIL) { 3452 action &= ~(SS_MASK|SSQ_MASK); 3453 action |= SS_RETRY|SSQ_DECREMENT_COUNT| 3454 SSQ_PRINT_SENSE; 3455 } 3456 action |= SSQ_UA; 3457 } 3458 } 3459 if ((action & SS_MASK) >= SS_START && 3460 (sense_flags & SF_NO_RECOVERY)) { 3461 action &= ~SS_MASK; 3462 action |= SS_FAIL; 3463 } else if ((action & SS_MASK) == SS_RETRY && 3464 (sense_flags & SF_NO_RETRY)) { 3465 action &= ~SS_MASK; 3466 action |= SS_FAIL; 3467 } 3468 if ((sense_flags & SF_PRINT_ALWAYS) != 0) 3469 action |= SSQ_PRINT_SENSE; 3470 else if ((sense_flags & SF_NO_PRINT) != 0) 3471 action &= ~SSQ_PRINT_SENSE; 3472 3473 return (action); 3474} 3475 3476char * 3477scsi_cdb_string(u_int8_t *cdb_ptr, char *cdb_string, size_t len) 3478{ 3479 struct sbuf sb; 3480 int error; 3481 3482 if (len == 0) 3483 return (""); 3484 3485 sbuf_new(&sb, cdb_string, len, SBUF_FIXEDLEN); 3486 3487 scsi_cdb_sbuf(cdb_ptr, &sb); 3488 3489 /* ENOMEM just means that the fixed buffer is full, OK to ignore */ 3490 error = sbuf_finish(&sb); 3491 if (error != 0 && 3492#ifdef _KERNEL 3493 error != ENOMEM) 3494#else 3495 errno != ENOMEM) 3496#endif 3497 return (""); 3498 3499 return(sbuf_data(&sb)); 3500} 3501 3502void 3503scsi_cdb_sbuf(u_int8_t *cdb_ptr, struct sbuf *sb) 3504{ 3505 u_int8_t cdb_len; 3506 int i; 3507 3508 if (cdb_ptr == NULL) 3509 return; 3510 3511 /* 3512 * This is taken from the SCSI-3 draft spec. 3513 * (T10/1157D revision 0.3) 3514 * The top 3 bits of an opcode are the group code. The next 5 bits 3515 * are the command code. 3516 * Group 0: six byte commands 3517 * Group 1: ten byte commands 3518 * Group 2: ten byte commands 3519 * Group 3: reserved 3520 * Group 4: sixteen byte commands 3521 * Group 5: twelve byte commands 3522 * Group 6: vendor specific 3523 * Group 7: vendor specific 3524 */ 3525 switch((*cdb_ptr >> 5) & 0x7) { 3526 case 0: 3527 cdb_len = 6; 3528 break; 3529 case 1: 3530 case 2: 3531 cdb_len = 10; 3532 break; 3533 case 3: 3534 case 6: 3535 case 7: 3536 /* in this case, just print out the opcode */ 3537 cdb_len = 1; 3538 break; 3539 case 4: 3540 cdb_len = 16; 3541 break; 3542 case 5: 3543 cdb_len = 12; 3544 break; 3545 } 3546 3547 for (i = 0; i < cdb_len; i++) 3548 sbuf_printf(sb, "%02hhx ", cdb_ptr[i]); 3549 3550 return; 3551} 3552 3553const char * 3554scsi_status_string(struct ccb_scsiio *csio) 3555{ 3556 switch(csio->scsi_status) { 3557 case SCSI_STATUS_OK: 3558 return("OK"); 3559 case SCSI_STATUS_CHECK_COND: 3560 return("Check Condition"); 3561 case SCSI_STATUS_BUSY: 3562 return("Busy"); 3563 case SCSI_STATUS_INTERMED: 3564 return("Intermediate"); 3565 case SCSI_STATUS_INTERMED_COND_MET: 3566 return("Intermediate-Condition Met"); 3567 case SCSI_STATUS_RESERV_CONFLICT: 3568 return("Reservation Conflict"); 3569 case SCSI_STATUS_CMD_TERMINATED: 3570 return("Command Terminated"); 3571 case SCSI_STATUS_QUEUE_FULL: 3572 return("Queue Full"); 3573 case SCSI_STATUS_ACA_ACTIVE: 3574 return("ACA Active"); 3575 case SCSI_STATUS_TASK_ABORTED: 3576 return("Task Aborted"); 3577 default: { 3578 static char unkstr[64]; 3579 snprintf(unkstr, sizeof(unkstr), "Unknown %#x", 3580 csio->scsi_status); 3581 return(unkstr); 3582 } 3583 } 3584} 3585 3586/* 3587 * scsi_command_string() returns 0 for success and -1 for failure. 3588 */ 3589#ifdef _KERNEL 3590int 3591scsi_command_string(struct ccb_scsiio *csio, struct sbuf *sb) 3592#else /* !_KERNEL */ 3593int 3594scsi_command_string(struct cam_device *device, struct ccb_scsiio *csio, 3595 struct sbuf *sb) 3596#endif /* _KERNEL/!_KERNEL */ 3597{ 3598 struct scsi_inquiry_data *inq_data; 3599#ifdef _KERNEL 3600 struct ccb_getdev *cgd; 3601#endif /* _KERNEL */ 3602 3603#ifdef _KERNEL 3604 if ((cgd = (struct ccb_getdev*)xpt_alloc_ccb_nowait()) == NULL) 3605 return(-1); 3606 /* 3607 * Get the device information. 3608 */ 3609 xpt_setup_ccb(&cgd->ccb_h, 3610 csio->ccb_h.path, 3611 CAM_PRIORITY_NORMAL); 3612 cgd->ccb_h.func_code = XPT_GDEV_TYPE; 3613 xpt_action((union ccb *)cgd); 3614 3615 /* 3616 * If the device is unconfigured, just pretend that it is a hard 3617 * drive. scsi_op_desc() needs this. 3618 */ 3619 if (cgd->ccb_h.status == CAM_DEV_NOT_THERE) 3620 cgd->inq_data.device = T_DIRECT; 3621 3622 inq_data = &cgd->inq_data; 3623 3624#else /* !_KERNEL */ 3625 3626 inq_data = &device->inq_data; 3627 3628#endif /* _KERNEL/!_KERNEL */ 3629 3630 sbuf_printf(sb, "%s. CDB: ", 3631 scsi_op_desc(scsiio_cdb_ptr(csio)[0], inq_data)); 3632 scsi_cdb_sbuf(scsiio_cdb_ptr(csio), sb); 3633 3634#ifdef _KERNEL 3635 xpt_free_ccb((union ccb *)cgd); 3636#endif 3637 3638 return(0); 3639} 3640 3641/* 3642 * Iterate over sense descriptors. Each descriptor is passed into iter_func(). 3643 * If iter_func() returns 0, list traversal continues. If iter_func() 3644 * returns non-zero, list traversal is stopped. 3645 */ 3646void 3647scsi_desc_iterate(struct scsi_sense_data_desc *sense, u_int sense_len, 3648 int (*iter_func)(struct scsi_sense_data_desc *sense, 3649 u_int, struct scsi_sense_desc_header *, 3650 void *), void *arg) 3651{ 3652 int cur_pos; 3653 int desc_len; 3654 3655 /* 3656 * First make sure the extra length field is present. 3657 */ 3658 if (SSD_DESC_IS_PRESENT(sense, sense_len, extra_len) == 0) 3659 return; 3660 3661 /* 3662 * The length of data actually returned may be different than the 3663 * extra_len recorded in the structure. 3664 */ 3665 desc_len = sense_len -offsetof(struct scsi_sense_data_desc, sense_desc); 3666 3667 /* 3668 * Limit this further by the extra length reported, and the maximum 3669 * allowed extra length. 3670 */ 3671 desc_len = MIN(desc_len, MIN(sense->extra_len, SSD_EXTRA_MAX)); 3672 3673 /* 3674 * Subtract the size of the header from the descriptor length. 3675 * This is to ensure that we have at least the header left, so we 3676 * don't have to check that inside the loop. This can wind up 3677 * being a negative value. 3678 */ 3679 desc_len -= sizeof(struct scsi_sense_desc_header); 3680 3681 for (cur_pos = 0; cur_pos < desc_len;) { 3682 struct scsi_sense_desc_header *header; 3683 3684 header = (struct scsi_sense_desc_header *) 3685 &sense->sense_desc[cur_pos]; 3686 3687 /* 3688 * Check to make sure we have the entire descriptor. We 3689 * don't call iter_func() unless we do. 3690 * 3691 * Note that although cur_pos is at the beginning of the 3692 * descriptor, desc_len already has the header length 3693 * subtracted. So the comparison of the length in the 3694 * header (which does not include the header itself) to 3695 * desc_len - cur_pos is correct. 3696 */ 3697 if (header->length > (desc_len - cur_pos)) 3698 break; 3699 3700 if (iter_func(sense, sense_len, header, arg) != 0) 3701 break; 3702 3703 cur_pos += sizeof(*header) + header->length; 3704 } 3705} 3706 3707struct scsi_find_desc_info { 3708 uint8_t desc_type; 3709 struct scsi_sense_desc_header *header; 3710}; 3711 3712static int 3713scsi_find_desc_func(struct scsi_sense_data_desc *sense, u_int sense_len, 3714 struct scsi_sense_desc_header *header, void *arg) 3715{ 3716 struct scsi_find_desc_info *desc_info; 3717 3718 desc_info = (struct scsi_find_desc_info *)arg; 3719 3720 if (header->desc_type == desc_info->desc_type) { 3721 desc_info->header = header; 3722 3723 /* We found the descriptor, tell the iterator to stop. */ 3724 return (1); 3725 } else 3726 return (0); 3727} 3728 3729/* 3730 * Given a descriptor type, return a pointer to it if it is in the sense 3731 * data and not truncated. Avoiding truncating sense data will simplify 3732 * things significantly for the caller. 3733 */ 3734uint8_t * 3735scsi_find_desc(struct scsi_sense_data_desc *sense, u_int sense_len, 3736 uint8_t desc_type) 3737{ 3738 struct scsi_find_desc_info desc_info; 3739 3740 desc_info.desc_type = desc_type; 3741 desc_info.header = NULL; 3742 3743 scsi_desc_iterate(sense, sense_len, scsi_find_desc_func, &desc_info); 3744 3745 return ((uint8_t *)desc_info.header); 3746} 3747 3748/* 3749 * Fill in SCSI descriptor sense data with the specified parameters. 3750 */ 3751static void 3752scsi_set_sense_data_desc_va(struct scsi_sense_data *sense_data, 3753 u_int *sense_len, scsi_sense_data_type sense_format, int current_error, 3754 int sense_key, int asc, int ascq, va_list ap) 3755{ 3756 struct scsi_sense_data_desc *sense; 3757 scsi_sense_elem_type elem_type; 3758 int space, len; 3759 uint8_t *desc, *data; 3760 3761 memset(sense_data, 0, sizeof(*sense_data)); 3762 sense = (struct scsi_sense_data_desc *)sense_data; 3763 if (current_error != 0) 3764 sense->error_code = SSD_DESC_CURRENT_ERROR; 3765 else 3766 sense->error_code = SSD_DESC_DEFERRED_ERROR; 3767 sense->sense_key = sense_key; 3768 sense->add_sense_code = asc; 3769 sense->add_sense_code_qual = ascq; 3770 sense->flags = 0; 3771 3772 desc = &sense->sense_desc[0]; 3773 space = *sense_len - offsetof(struct scsi_sense_data_desc, sense_desc); 3774 while ((elem_type = va_arg(ap, scsi_sense_elem_type)) != 3775 SSD_ELEM_NONE) { 3776 if (elem_type >= SSD_ELEM_MAX) { 3777 printf("%s: invalid sense type %d\n", __func__, 3778 elem_type); 3779 break; 3780 } 3781 len = va_arg(ap, int); 3782 data = va_arg(ap, uint8_t *); 3783 3784 switch (elem_type) { 3785 case SSD_ELEM_SKIP: 3786 break; 3787 case SSD_ELEM_DESC: 3788 if (space < len) { 3789 sense->flags |= SSDD_SDAT_OVFL; 3790 break; 3791 } 3792 bcopy(data, desc, len); 3793 desc += len; 3794 space -= len; 3795 break; 3796 case SSD_ELEM_SKS: { 3797 struct scsi_sense_sks *sks = (void *)desc; 3798 3799 if (len > sizeof(sks->sense_key_spec)) 3800 break; 3801 if (space < sizeof(*sks)) { 3802 sense->flags |= SSDD_SDAT_OVFL; 3803 break; 3804 } 3805 sks->desc_type = SSD_DESC_SKS; 3806 sks->length = sizeof(*sks) - 3807 (offsetof(struct scsi_sense_sks, length) + 1); 3808 bcopy(data, &sks->sense_key_spec, len); 3809 desc += sizeof(*sks); 3810 space -= sizeof(*sks); 3811 break; 3812 } 3813 case SSD_ELEM_COMMAND: { 3814 struct scsi_sense_command *cmd = (void *)desc; 3815 3816 if (len > sizeof(cmd->command_info)) 3817 break; 3818 if (space < sizeof(*cmd)) { 3819 sense->flags |= SSDD_SDAT_OVFL; 3820 break; 3821 } 3822 cmd->desc_type = SSD_DESC_COMMAND; 3823 cmd->length = sizeof(*cmd) - 3824 (offsetof(struct scsi_sense_command, length) + 1); 3825 bcopy(data, &cmd->command_info[ 3826 sizeof(cmd->command_info) - len], len); 3827 desc += sizeof(*cmd); 3828 space -= sizeof(*cmd); 3829 break; 3830 } 3831 case SSD_ELEM_INFO: { 3832 struct scsi_sense_info *info = (void *)desc; 3833 3834 if (len > sizeof(info->info)) 3835 break; 3836 if (space < sizeof(*info)) { 3837 sense->flags |= SSDD_SDAT_OVFL; 3838 break; 3839 } 3840 info->desc_type = SSD_DESC_INFO; 3841 info->length = sizeof(*info) - 3842 (offsetof(struct scsi_sense_info, length) + 1); 3843 info->byte2 = SSD_INFO_VALID; 3844 bcopy(data, &info->info[sizeof(info->info) - len], len); 3845 desc += sizeof(*info); 3846 space -= sizeof(*info); 3847 break; 3848 } 3849 case SSD_ELEM_FRU: { 3850 struct scsi_sense_fru *fru = (void *)desc; 3851 3852 if (len > sizeof(fru->fru)) 3853 break; 3854 if (space < sizeof(*fru)) { 3855 sense->flags |= SSDD_SDAT_OVFL; 3856 break; 3857 } 3858 fru->desc_type = SSD_DESC_FRU; 3859 fru->length = sizeof(*fru) - 3860 (offsetof(struct scsi_sense_fru, length) + 1); 3861 fru->fru = *data; 3862 desc += sizeof(*fru); 3863 space -= sizeof(*fru); 3864 break; 3865 } 3866 case SSD_ELEM_STREAM: { 3867 struct scsi_sense_stream *stream = (void *)desc; 3868 3869 if (len > sizeof(stream->byte3)) 3870 break; 3871 if (space < sizeof(*stream)) { 3872 sense->flags |= SSDD_SDAT_OVFL; 3873 break; 3874 } 3875 stream->desc_type = SSD_DESC_STREAM; 3876 stream->length = sizeof(*stream) - 3877 (offsetof(struct scsi_sense_stream, length) + 1); 3878 stream->byte3 = *data; 3879 desc += sizeof(*stream); 3880 space -= sizeof(*stream); 3881 break; 3882 } 3883 default: 3884 /* 3885 * We shouldn't get here, but if we do, do nothing. 3886 * We've already consumed the arguments above. 3887 */ 3888 break; 3889 } 3890 } 3891 sense->extra_len = desc - &sense->sense_desc[0]; 3892 *sense_len = offsetof(struct scsi_sense_data_desc, extra_len) + 1 + 3893 sense->extra_len; 3894} 3895 3896/* 3897 * Fill in SCSI fixed sense data with the specified parameters. 3898 */ 3899static void 3900scsi_set_sense_data_fixed_va(struct scsi_sense_data *sense_data, 3901 u_int *sense_len, scsi_sense_data_type sense_format, int current_error, 3902 int sense_key, int asc, int ascq, va_list ap) 3903{ 3904 struct scsi_sense_data_fixed *sense; 3905 scsi_sense_elem_type elem_type; 3906 uint8_t *data; 3907 int len; 3908 3909 memset(sense_data, 0, sizeof(*sense_data)); 3910 sense = (struct scsi_sense_data_fixed *)sense_data; 3911 if (current_error != 0) 3912 sense->error_code = SSD_CURRENT_ERROR; 3913 else 3914 sense->error_code = SSD_DEFERRED_ERROR; 3915 sense->flags = sense_key & SSD_KEY; 3916 sense->extra_len = 0; 3917 if (*sense_len >= 13) { 3918 sense->add_sense_code = asc; 3919 sense->extra_len = MAX(sense->extra_len, 5); 3920 } else 3921 sense->flags |= SSD_SDAT_OVFL; 3922 if (*sense_len >= 14) { 3923 sense->add_sense_code_qual = ascq; 3924 sense->extra_len = MAX(sense->extra_len, 6); 3925 } else 3926 sense->flags |= SSD_SDAT_OVFL; 3927 3928 while ((elem_type = va_arg(ap, scsi_sense_elem_type)) != 3929 SSD_ELEM_NONE) { 3930 if (elem_type >= SSD_ELEM_MAX) { 3931 printf("%s: invalid sense type %d\n", __func__, 3932 elem_type); 3933 break; 3934 } 3935 len = va_arg(ap, int); 3936 data = va_arg(ap, uint8_t *); 3937 3938 switch (elem_type) { 3939 case SSD_ELEM_SKIP: 3940 break; 3941 case SSD_ELEM_SKS: 3942 if (len > sizeof(sense->sense_key_spec)) 3943 break; 3944 if (*sense_len < 18) { 3945 sense->flags |= SSD_SDAT_OVFL; 3946 break; 3947 } 3948 bcopy(data, &sense->sense_key_spec[0], len); 3949 sense->extra_len = MAX(sense->extra_len, 10); 3950 break; 3951 case SSD_ELEM_COMMAND: 3952 if (*sense_len < 12) { 3953 sense->flags |= SSD_SDAT_OVFL; 3954 break; 3955 } 3956 if (len > sizeof(sense->cmd_spec_info)) { 3957 data += len - sizeof(sense->cmd_spec_info); 3958 len = sizeof(sense->cmd_spec_info); 3959 } 3960 bcopy(data, &sense->cmd_spec_info[ 3961 sizeof(sense->cmd_spec_info) - len], len); 3962 sense->extra_len = MAX(sense->extra_len, 4); 3963 break; 3964 case SSD_ELEM_INFO: 3965 /* Set VALID bit only if no overflow. */ 3966 sense->error_code |= SSD_ERRCODE_VALID; 3967 while (len > sizeof(sense->info)) { 3968 if (data[0] != 0) 3969 sense->error_code &= ~SSD_ERRCODE_VALID; 3970 data ++; 3971 len --; 3972 } 3973 bcopy(data, &sense->info[sizeof(sense->info) - len], len); 3974 break; 3975 case SSD_ELEM_FRU: 3976 if (*sense_len < 15) { 3977 sense->flags |= SSD_SDAT_OVFL; 3978 break; 3979 } 3980 sense->fru = *data; 3981 sense->extra_len = MAX(sense->extra_len, 7); 3982 break; 3983 case SSD_ELEM_STREAM: 3984 sense->flags |= *data & 3985 (SSD_ILI | SSD_EOM | SSD_FILEMARK); 3986 break; 3987 default: 3988 3989 /* 3990 * We can't handle that in fixed format. Skip it. 3991 */ 3992 break; 3993 } 3994 } 3995 *sense_len = offsetof(struct scsi_sense_data_fixed, extra_len) + 1 + 3996 sense->extra_len; 3997} 3998 3999/* 4000 * Fill in SCSI sense data with the specified parameters. This routine can 4001 * fill in either fixed or descriptor type sense data. 4002 */ 4003void 4004scsi_set_sense_data_va(struct scsi_sense_data *sense_data, u_int *sense_len, 4005 scsi_sense_data_type sense_format, int current_error, 4006 int sense_key, int asc, int ascq, va_list ap) 4007{ 4008 4009 if (*sense_len > SSD_FULL_SIZE) 4010 *sense_len = SSD_FULL_SIZE; 4011 if (sense_format == SSD_TYPE_DESC) 4012 scsi_set_sense_data_desc_va(sense_data, sense_len, 4013 sense_format, current_error, sense_key, asc, ascq, ap); 4014 else 4015 scsi_set_sense_data_fixed_va(sense_data, sense_len, 4016 sense_format, current_error, sense_key, asc, ascq, ap); 4017} 4018 4019void 4020scsi_set_sense_data(struct scsi_sense_data *sense_data, 4021 scsi_sense_data_type sense_format, int current_error, 4022 int sense_key, int asc, int ascq, ...) 4023{ 4024 va_list ap; 4025 u_int sense_len = SSD_FULL_SIZE; 4026 4027 va_start(ap, ascq); 4028 scsi_set_sense_data_va(sense_data, &sense_len, sense_format, 4029 current_error, sense_key, asc, ascq, ap); 4030 va_end(ap); 4031} 4032 4033void 4034scsi_set_sense_data_len(struct scsi_sense_data *sense_data, u_int *sense_len, 4035 scsi_sense_data_type sense_format, int current_error, 4036 int sense_key, int asc, int ascq, ...) 4037{ 4038 va_list ap; 4039 4040 va_start(ap, ascq); 4041 scsi_set_sense_data_va(sense_data, sense_len, sense_format, 4042 current_error, sense_key, asc, ascq, ap); 4043 va_end(ap); 4044} 4045 4046/* 4047 * Get sense information for three similar sense data types. 4048 */ 4049int 4050scsi_get_sense_info(struct scsi_sense_data *sense_data, u_int sense_len, 4051 uint8_t info_type, uint64_t *info, int64_t *signed_info) 4052{ 4053 scsi_sense_data_type sense_type; 4054 4055 if (sense_len == 0) 4056 goto bailout; 4057 4058 sense_type = scsi_sense_type(sense_data); 4059 4060 switch (sense_type) { 4061 case SSD_TYPE_DESC: { 4062 struct scsi_sense_data_desc *sense; 4063 uint8_t *desc; 4064 4065 sense = (struct scsi_sense_data_desc *)sense_data; 4066 4067 desc = scsi_find_desc(sense, sense_len, info_type); 4068 if (desc == NULL) 4069 goto bailout; 4070 4071 switch (info_type) { 4072 case SSD_DESC_INFO: { 4073 struct scsi_sense_info *info_desc; 4074 4075 info_desc = (struct scsi_sense_info *)desc; 4076 4077 if ((info_desc->byte2 & SSD_INFO_VALID) == 0) 4078 goto bailout; 4079 4080 *info = scsi_8btou64(info_desc->info); 4081 if (signed_info != NULL) 4082 *signed_info = *info; 4083 break; 4084 } 4085 case SSD_DESC_COMMAND: { 4086 struct scsi_sense_command *cmd_desc; 4087 4088 cmd_desc = (struct scsi_sense_command *)desc; 4089 4090 *info = scsi_8btou64(cmd_desc->command_info); 4091 if (signed_info != NULL) 4092 *signed_info = *info; 4093 break; 4094 } 4095 case SSD_DESC_FRU: { 4096 struct scsi_sense_fru *fru_desc; 4097 4098 fru_desc = (struct scsi_sense_fru *)desc; 4099 4100 if (fru_desc->fru == 0) 4101 goto bailout; 4102 4103 *info = fru_desc->fru; 4104 if (signed_info != NULL) 4105 *signed_info = (int8_t)fru_desc->fru; 4106 break; 4107 } 4108 default: 4109 goto bailout; 4110 break; 4111 } 4112 break; 4113 } 4114 case SSD_TYPE_FIXED: { 4115 struct scsi_sense_data_fixed *sense; 4116 4117 sense = (struct scsi_sense_data_fixed *)sense_data; 4118 4119 switch (info_type) { 4120 case SSD_DESC_INFO: { 4121 uint32_t info_val; 4122 4123 if ((sense->error_code & SSD_ERRCODE_VALID) == 0) 4124 goto bailout; 4125 4126 if (SSD_FIXED_IS_PRESENT(sense, sense_len, info) == 0) 4127 goto bailout; 4128 4129 info_val = scsi_4btoul(sense->info); 4130 4131 *info = info_val; 4132 if (signed_info != NULL) 4133 *signed_info = (int32_t)info_val; 4134 break; 4135 } 4136 case SSD_DESC_COMMAND: { 4137 uint32_t cmd_val; 4138 4139 if ((SSD_FIXED_IS_PRESENT(sense, sense_len, 4140 cmd_spec_info) == 0) 4141 || (SSD_FIXED_IS_FILLED(sense, cmd_spec_info) == 0)) 4142 goto bailout; 4143 4144 cmd_val = scsi_4btoul(sense->cmd_spec_info); 4145 if (cmd_val == 0) 4146 goto bailout; 4147 4148 *info = cmd_val; 4149 if (signed_info != NULL) 4150 *signed_info = (int32_t)cmd_val; 4151 break; 4152 } 4153 case SSD_DESC_FRU: 4154 if ((SSD_FIXED_IS_PRESENT(sense, sense_len, fru) == 0) 4155 || (SSD_FIXED_IS_FILLED(sense, fru) == 0)) 4156 goto bailout; 4157 4158 if (sense->fru == 0) 4159 goto bailout; 4160 4161 *info = sense->fru; 4162 if (signed_info != NULL) 4163 *signed_info = (int8_t)sense->fru; 4164 break; 4165 default: 4166 goto bailout; 4167 break; 4168 } 4169 break; 4170 } 4171 default: 4172 goto bailout; 4173 break; 4174 } 4175 4176 return (0); 4177bailout: 4178 return (1); 4179} 4180 4181int 4182scsi_get_sks(struct scsi_sense_data *sense_data, u_int sense_len, uint8_t *sks) 4183{ 4184 scsi_sense_data_type sense_type; 4185 4186 if (sense_len == 0) 4187 goto bailout; 4188 4189 sense_type = scsi_sense_type(sense_data); 4190 4191 switch (sense_type) { 4192 case SSD_TYPE_DESC: { 4193 struct scsi_sense_data_desc *sense; 4194 struct scsi_sense_sks *desc; 4195 4196 sense = (struct scsi_sense_data_desc *)sense_data; 4197 4198 desc = (struct scsi_sense_sks *)scsi_find_desc(sense, sense_len, 4199 SSD_DESC_SKS); 4200 if (desc == NULL) 4201 goto bailout; 4202 4203 if ((desc->sense_key_spec[0] & SSD_SKS_VALID) == 0) 4204 goto bailout; 4205 4206 bcopy(desc->sense_key_spec, sks, sizeof(desc->sense_key_spec)); 4207 break; 4208 } 4209 case SSD_TYPE_FIXED: { 4210 struct scsi_sense_data_fixed *sense; 4211 4212 sense = (struct scsi_sense_data_fixed *)sense_data; 4213 4214 if ((SSD_FIXED_IS_PRESENT(sense, sense_len, sense_key_spec)== 0) 4215 || (SSD_FIXED_IS_FILLED(sense, sense_key_spec) == 0)) 4216 goto bailout; 4217 4218 if ((sense->sense_key_spec[0] & SSD_SCS_VALID) == 0) 4219 goto bailout; 4220 4221 bcopy(sense->sense_key_spec, sks,sizeof(sense->sense_key_spec)); 4222 break; 4223 } 4224 default: 4225 goto bailout; 4226 break; 4227 } 4228 return (0); 4229bailout: 4230 return (1); 4231} 4232 4233/* 4234 * Provide a common interface for fixed and descriptor sense to detect 4235 * whether we have block-specific sense information. It is clear by the 4236 * presence of the block descriptor in descriptor mode, but we have to 4237 * infer from the inquiry data and ILI bit in fixed mode. 4238 */ 4239int 4240scsi_get_block_info(struct scsi_sense_data *sense_data, u_int sense_len, 4241 struct scsi_inquiry_data *inq_data, uint8_t *block_bits) 4242{ 4243 scsi_sense_data_type sense_type; 4244 4245 if (inq_data != NULL) { 4246 switch (SID_TYPE(inq_data)) { 4247 case T_DIRECT: 4248 case T_RBC: 4249 case T_ZBC_HM: 4250 break; 4251 default: 4252 goto bailout; 4253 break; 4254 } 4255 } 4256 4257 sense_type = scsi_sense_type(sense_data); 4258 4259 switch (sense_type) { 4260 case SSD_TYPE_DESC: { 4261 struct scsi_sense_data_desc *sense; 4262 struct scsi_sense_block *block; 4263 4264 sense = (struct scsi_sense_data_desc *)sense_data; 4265 4266 block = (struct scsi_sense_block *)scsi_find_desc(sense, 4267 sense_len, SSD_DESC_BLOCK); 4268 if (block == NULL) 4269 goto bailout; 4270 4271 *block_bits = block->byte3; 4272 break; 4273 } 4274 case SSD_TYPE_FIXED: { 4275 struct scsi_sense_data_fixed *sense; 4276 4277 sense = (struct scsi_sense_data_fixed *)sense_data; 4278 4279 if (SSD_FIXED_IS_PRESENT(sense, sense_len, flags) == 0) 4280 goto bailout; 4281 4282 *block_bits = sense->flags & SSD_ILI; 4283 break; 4284 } 4285 default: 4286 goto bailout; 4287 break; 4288 } 4289 return (0); 4290bailout: 4291 return (1); 4292} 4293 4294int 4295scsi_get_stream_info(struct scsi_sense_data *sense_data, u_int sense_len, 4296 struct scsi_inquiry_data *inq_data, uint8_t *stream_bits) 4297{ 4298 scsi_sense_data_type sense_type; 4299 4300 if (inq_data != NULL) { 4301 switch (SID_TYPE(inq_data)) { 4302 case T_SEQUENTIAL: 4303 break; 4304 default: 4305 goto bailout; 4306 break; 4307 } 4308 } 4309 4310 sense_type = scsi_sense_type(sense_data); 4311 4312 switch (sense_type) { 4313 case SSD_TYPE_DESC: { 4314 struct scsi_sense_data_desc *sense; 4315 struct scsi_sense_stream *stream; 4316 4317 sense = (struct scsi_sense_data_desc *)sense_data; 4318 4319 stream = (struct scsi_sense_stream *)scsi_find_desc(sense, 4320 sense_len, SSD_DESC_STREAM); 4321 if (stream == NULL) 4322 goto bailout; 4323 4324 *stream_bits = stream->byte3; 4325 break; 4326 } 4327 case SSD_TYPE_FIXED: { 4328 struct scsi_sense_data_fixed *sense; 4329 4330 sense = (struct scsi_sense_data_fixed *)sense_data; 4331 4332 if (SSD_FIXED_IS_PRESENT(sense, sense_len, flags) == 0) 4333 goto bailout; 4334 4335 *stream_bits = sense->flags & (SSD_ILI|SSD_EOM|SSD_FILEMARK); 4336 break; 4337 } 4338 default: 4339 goto bailout; 4340 break; 4341 } 4342 return (0); 4343bailout: 4344 return (1); 4345} 4346 4347void 4348scsi_info_sbuf(struct sbuf *sb, uint8_t *cdb, int cdb_len, 4349 struct scsi_inquiry_data *inq_data, uint64_t info) 4350{ 4351 sbuf_printf(sb, "Info: %#jx", info); 4352} 4353 4354void 4355scsi_command_sbuf(struct sbuf *sb, uint8_t *cdb, int cdb_len, 4356 struct scsi_inquiry_data *inq_data, uint64_t csi) 4357{ 4358 sbuf_printf(sb, "Command Specific Info: %#jx", csi); 4359} 4360 4361 4362void 4363scsi_progress_sbuf(struct sbuf *sb, uint16_t progress) 4364{ 4365 sbuf_printf(sb, "Progress: %d%% (%d/%d) complete", 4366 (progress * 100) / SSD_SKS_PROGRESS_DENOM, 4367 progress, SSD_SKS_PROGRESS_DENOM); 4368} 4369 4370/* 4371 * Returns 1 for failure (i.e. SKS isn't valid) and 0 for success. 4372 */ 4373int 4374scsi_sks_sbuf(struct sbuf *sb, int sense_key, uint8_t *sks) 4375{ 4376 4377 switch (sense_key) { 4378 case SSD_KEY_ILLEGAL_REQUEST: { 4379 struct scsi_sense_sks_field *field; 4380 int bad_command; 4381 char tmpstr[40]; 4382 4383 /*Field Pointer*/ 4384 field = (struct scsi_sense_sks_field *)sks; 4385 4386 if (field->byte0 & SSD_SKS_FIELD_CMD) 4387 bad_command = 1; 4388 else 4389 bad_command = 0; 4390 4391 tmpstr[0] = '\0'; 4392 4393 /* Bit pointer is valid */ 4394 if (field->byte0 & SSD_SKS_BPV) 4395 snprintf(tmpstr, sizeof(tmpstr), "bit %d ", 4396 field->byte0 & SSD_SKS_BIT_VALUE); 4397 4398 sbuf_printf(sb, "%s byte %d %sis invalid", 4399 bad_command ? "Command" : "Data", 4400 scsi_2btoul(field->field), tmpstr); 4401 break; 4402 } 4403 case SSD_KEY_UNIT_ATTENTION: { 4404 struct scsi_sense_sks_overflow *overflow; 4405 4406 overflow = (struct scsi_sense_sks_overflow *)sks; 4407 4408 /*UA Condition Queue Overflow*/ 4409 sbuf_printf(sb, "Unit Attention Condition Queue %s", 4410 (overflow->byte0 & SSD_SKS_OVERFLOW_SET) ? 4411 "Overflowed" : "Did Not Overflow??"); 4412 break; 4413 } 4414 case SSD_KEY_RECOVERED_ERROR: 4415 case SSD_KEY_HARDWARE_ERROR: 4416 case SSD_KEY_MEDIUM_ERROR: { 4417 struct scsi_sense_sks_retry *retry; 4418 4419 /*Actual Retry Count*/ 4420 retry = (struct scsi_sense_sks_retry *)sks; 4421 4422 sbuf_printf(sb, "Actual Retry Count: %d", 4423 scsi_2btoul(retry->actual_retry_count)); 4424 break; 4425 } 4426 case SSD_KEY_NO_SENSE: 4427 case SSD_KEY_NOT_READY: { 4428 struct scsi_sense_sks_progress *progress; 4429 int progress_val; 4430 4431 /*Progress Indication*/ 4432 progress = (struct scsi_sense_sks_progress *)sks; 4433 progress_val = scsi_2btoul(progress->progress); 4434 4435 scsi_progress_sbuf(sb, progress_val); 4436 break; 4437 } 4438 case SSD_KEY_COPY_ABORTED: { 4439 struct scsi_sense_sks_segment *segment; 4440 char tmpstr[40]; 4441 4442 /*Segment Pointer*/ 4443 segment = (struct scsi_sense_sks_segment *)sks; 4444 4445 tmpstr[0] = '\0'; 4446 4447 if (segment->byte0 & SSD_SKS_SEGMENT_BPV) 4448 snprintf(tmpstr, sizeof(tmpstr), "bit %d ", 4449 segment->byte0 & SSD_SKS_SEGMENT_BITPTR); 4450 4451 sbuf_printf(sb, "%s byte %d %sis invalid", (segment->byte0 & 4452 SSD_SKS_SEGMENT_SD) ? "Segment" : "Data", 4453 scsi_2btoul(segment->field), tmpstr); 4454 break; 4455 } 4456 default: 4457 sbuf_printf(sb, "Sense Key Specific: %#x,%#x", sks[0], 4458 scsi_2btoul(&sks[1])); 4459 break; 4460 } 4461 4462 return (0); 4463} 4464 4465void 4466scsi_fru_sbuf(struct sbuf *sb, uint64_t fru) 4467{ 4468 sbuf_printf(sb, "Field Replaceable Unit: %d", (int)fru); 4469} 4470 4471void 4472scsi_stream_sbuf(struct sbuf *sb, uint8_t stream_bits) 4473{ 4474 int need_comma; 4475 4476 need_comma = 0; 4477 /* 4478 * XXX KDM this needs more descriptive decoding. 4479 */ 4480 sbuf_printf(sb, "Stream Command Sense Data: "); 4481 if (stream_bits & SSD_DESC_STREAM_FM) { 4482 sbuf_printf(sb, "Filemark"); 4483 need_comma = 1; 4484 } 4485 4486 if (stream_bits & SSD_DESC_STREAM_EOM) { 4487 sbuf_printf(sb, "%sEOM", (need_comma) ? "," : ""); 4488 need_comma = 1; 4489 } 4490 4491 if (stream_bits & SSD_DESC_STREAM_ILI) 4492 sbuf_printf(sb, "%sILI", (need_comma) ? "," : ""); 4493} 4494 4495void 4496scsi_block_sbuf(struct sbuf *sb, uint8_t block_bits) 4497{ 4498 4499 sbuf_printf(sb, "Block Command Sense Data: "); 4500 if (block_bits & SSD_DESC_BLOCK_ILI) 4501 sbuf_printf(sb, "ILI"); 4502} 4503 4504void 4505scsi_sense_info_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4506 u_int sense_len, uint8_t *cdb, int cdb_len, 4507 struct scsi_inquiry_data *inq_data, 4508 struct scsi_sense_desc_header *header) 4509{ 4510 struct scsi_sense_info *info; 4511 4512 info = (struct scsi_sense_info *)header; 4513 4514 if ((info->byte2 & SSD_INFO_VALID) == 0) 4515 return; 4516 4517 scsi_info_sbuf(sb, cdb, cdb_len, inq_data, scsi_8btou64(info->info)); 4518} 4519 4520void 4521scsi_sense_command_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4522 u_int sense_len, uint8_t *cdb, int cdb_len, 4523 struct scsi_inquiry_data *inq_data, 4524 struct scsi_sense_desc_header *header) 4525{ 4526 struct scsi_sense_command *command; 4527 4528 command = (struct scsi_sense_command *)header; 4529 4530 scsi_command_sbuf(sb, cdb, cdb_len, inq_data, 4531 scsi_8btou64(command->command_info)); 4532} 4533 4534void 4535scsi_sense_sks_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4536 u_int sense_len, uint8_t *cdb, int cdb_len, 4537 struct scsi_inquiry_data *inq_data, 4538 struct scsi_sense_desc_header *header) 4539{ 4540 struct scsi_sense_sks *sks; 4541 int error_code, sense_key, asc, ascq; 4542 4543 sks = (struct scsi_sense_sks *)header; 4544 4545 if ((sks->sense_key_spec[0] & SSD_SKS_VALID) == 0) 4546 return; 4547 4548 scsi_extract_sense_len(sense, sense_len, &error_code, &sense_key, 4549 &asc, &ascq, /*show_errors*/ 1); 4550 4551 scsi_sks_sbuf(sb, sense_key, sks->sense_key_spec); 4552} 4553 4554void 4555scsi_sense_fru_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4556 u_int sense_len, uint8_t *cdb, int cdb_len, 4557 struct scsi_inquiry_data *inq_data, 4558 struct scsi_sense_desc_header *header) 4559{ 4560 struct scsi_sense_fru *fru; 4561 4562 fru = (struct scsi_sense_fru *)header; 4563 4564 if (fru->fru == 0) 4565 return; 4566 4567 scsi_fru_sbuf(sb, (uint64_t)fru->fru); 4568} 4569 4570void 4571scsi_sense_stream_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4572 u_int sense_len, uint8_t *cdb, int cdb_len, 4573 struct scsi_inquiry_data *inq_data, 4574 struct scsi_sense_desc_header *header) 4575{ 4576 struct scsi_sense_stream *stream; 4577 4578 stream = (struct scsi_sense_stream *)header; 4579 scsi_stream_sbuf(sb, stream->byte3); 4580} 4581 4582void 4583scsi_sense_block_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4584 u_int sense_len, uint8_t *cdb, int cdb_len, 4585 struct scsi_inquiry_data *inq_data, 4586 struct scsi_sense_desc_header *header) 4587{ 4588 struct scsi_sense_block *block; 4589 4590 block = (struct scsi_sense_block *)header; 4591 scsi_block_sbuf(sb, block->byte3); 4592} 4593 4594void 4595scsi_sense_progress_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4596 u_int sense_len, uint8_t *cdb, int cdb_len, 4597 struct scsi_inquiry_data *inq_data, 4598 struct scsi_sense_desc_header *header) 4599{ 4600 struct scsi_sense_progress *progress; 4601 const char *sense_key_desc; 4602 const char *asc_desc; 4603 int progress_val; 4604 4605 progress = (struct scsi_sense_progress *)header; 4606 4607 /* 4608 * Get descriptions for the sense key, ASC, and ASCQ in the 4609 * progress descriptor. These could be different than the values 4610 * in the overall sense data. 4611 */ 4612 scsi_sense_desc(progress->sense_key, progress->add_sense_code, 4613 progress->add_sense_code_qual, inq_data, 4614 &sense_key_desc, &asc_desc); 4615 4616 progress_val = scsi_2btoul(progress->progress); 4617 4618 /* 4619 * The progress indicator is for the operation described by the 4620 * sense key, ASC, and ASCQ in the descriptor. 4621 */ 4622 sbuf_cat(sb, sense_key_desc); 4623 sbuf_printf(sb, " asc:%x,%x (%s): ", progress->add_sense_code, 4624 progress->add_sense_code_qual, asc_desc); 4625 scsi_progress_sbuf(sb, progress_val); 4626} 4627 4628void 4629scsi_sense_ata_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4630 u_int sense_len, uint8_t *cdb, int cdb_len, 4631 struct scsi_inquiry_data *inq_data, 4632 struct scsi_sense_desc_header *header) 4633{ 4634 struct scsi_sense_ata_ret_desc *res; 4635 4636 res = (struct scsi_sense_ata_ret_desc *)header; 4637 4638 sbuf_printf(sb, "ATA status: %02x (%s%s%s%s%s%s%s%s), ", 4639 res->status, 4640 (res->status & 0x80) ? "BSY " : "", 4641 (res->status & 0x40) ? "DRDY " : "", 4642 (res->status & 0x20) ? "DF " : "", 4643 (res->status & 0x10) ? "SERV " : "", 4644 (res->status & 0x08) ? "DRQ " : "", 4645 (res->status & 0x04) ? "CORR " : "", 4646 (res->status & 0x02) ? "IDX " : "", 4647 (res->status & 0x01) ? "ERR" : ""); 4648 if (res->status & 1) { 4649 sbuf_printf(sb, "error: %02x (%s%s%s%s%s%s%s%s), ", 4650 res->error, 4651 (res->error & 0x80) ? "ICRC " : "", 4652 (res->error & 0x40) ? "UNC " : "", 4653 (res->error & 0x20) ? "MC " : "", 4654 (res->error & 0x10) ? "IDNF " : "", 4655 (res->error & 0x08) ? "MCR " : "", 4656 (res->error & 0x04) ? "ABRT " : "", 4657 (res->error & 0x02) ? "NM " : "", 4658 (res->error & 0x01) ? "ILI" : ""); 4659 } 4660 4661 if (res->flags & SSD_DESC_ATA_FLAG_EXTEND) { 4662 sbuf_printf(sb, "count: %02x%02x, ", 4663 res->count_15_8, res->count_7_0); 4664 sbuf_printf(sb, "LBA: %02x%02x%02x%02x%02x%02x, ", 4665 res->lba_47_40, res->lba_39_32, res->lba_31_24, 4666 res->lba_23_16, res->lba_15_8, res->lba_7_0); 4667 } else { 4668 sbuf_printf(sb, "count: %02x, ", res->count_7_0); 4669 sbuf_printf(sb, "LBA: %02x%02x%02x, ", 4670 res->lba_23_16, res->lba_15_8, res->lba_7_0); 4671 } 4672 sbuf_printf(sb, "device: %02x, ", res->device); 4673} 4674 4675void 4676scsi_sense_forwarded_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4677 u_int sense_len, uint8_t *cdb, int cdb_len, 4678 struct scsi_inquiry_data *inq_data, 4679 struct scsi_sense_desc_header *header) 4680{ 4681 struct scsi_sense_forwarded *forwarded; 4682 const char *sense_key_desc; 4683 const char *asc_desc; 4684 int error_code, sense_key, asc, ascq; 4685 4686 forwarded = (struct scsi_sense_forwarded *)header; 4687 scsi_extract_sense_len((struct scsi_sense_data *)forwarded->sense_data, 4688 forwarded->length - 2, &error_code, &sense_key, &asc, &ascq, 1); 4689 scsi_sense_desc(sense_key, asc, ascq, NULL, &sense_key_desc, &asc_desc); 4690 4691 sbuf_printf(sb, "Forwarded sense: %s asc:%x,%x (%s): ", 4692 sense_key_desc, asc, ascq, asc_desc); 4693} 4694 4695/* 4696 * Generic sense descriptor printing routine. This is used when we have 4697 * not yet implemented a specific printing routine for this descriptor. 4698 */ 4699void 4700scsi_sense_generic_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4701 u_int sense_len, uint8_t *cdb, int cdb_len, 4702 struct scsi_inquiry_data *inq_data, 4703 struct scsi_sense_desc_header *header) 4704{ 4705 int i; 4706 uint8_t *buf_ptr; 4707 4708 sbuf_printf(sb, "Descriptor %#x:", header->desc_type); 4709 4710 buf_ptr = (uint8_t *)&header[1]; 4711 4712 for (i = 0; i < header->length; i++, buf_ptr++) 4713 sbuf_printf(sb, " %02x", *buf_ptr); 4714} 4715 4716/* 4717 * Keep this list in numeric order. This speeds the array traversal. 4718 */ 4719struct scsi_sense_desc_printer { 4720 uint8_t desc_type; 4721 /* 4722 * The function arguments here are the superset of what is needed 4723 * to print out various different descriptors. Command and 4724 * information descriptors need inquiry data and command type. 4725 * Sense key specific descriptors need the sense key. 4726 * 4727 * The sense, cdb, and inquiry data arguments may be NULL, but the 4728 * information printed may not be fully decoded as a result. 4729 */ 4730 void (*print_func)(struct sbuf *sb, struct scsi_sense_data *sense, 4731 u_int sense_len, uint8_t *cdb, int cdb_len, 4732 struct scsi_inquiry_data *inq_data, 4733 struct scsi_sense_desc_header *header); 4734} scsi_sense_printers[] = { 4735 {SSD_DESC_INFO, scsi_sense_info_sbuf}, 4736 {SSD_DESC_COMMAND, scsi_sense_command_sbuf}, 4737 {SSD_DESC_SKS, scsi_sense_sks_sbuf}, 4738 {SSD_DESC_FRU, scsi_sense_fru_sbuf}, 4739 {SSD_DESC_STREAM, scsi_sense_stream_sbuf}, 4740 {SSD_DESC_BLOCK, scsi_sense_block_sbuf}, 4741 {SSD_DESC_ATA, scsi_sense_ata_sbuf}, 4742 {SSD_DESC_PROGRESS, scsi_sense_progress_sbuf}, 4743 {SSD_DESC_FORWARDED, scsi_sense_forwarded_sbuf} 4744}; 4745 4746void 4747scsi_sense_desc_sbuf(struct sbuf *sb, struct scsi_sense_data *sense, 4748 u_int sense_len, uint8_t *cdb, int cdb_len, 4749 struct scsi_inquiry_data *inq_data, 4750 struct scsi_sense_desc_header *header) 4751{ 4752 u_int i; 4753 4754 for (i = 0; i < nitems(scsi_sense_printers); i++) { 4755 struct scsi_sense_desc_printer *printer; 4756 4757 printer = &scsi_sense_printers[i]; 4758 4759 /* 4760 * The list is sorted, so quit if we've passed our 4761 * descriptor number. 4762 */ 4763 if (printer->desc_type > header->desc_type) 4764 break; 4765 4766 if (printer->desc_type != header->desc_type) 4767 continue; 4768 4769 printer->print_func(sb, sense, sense_len, cdb, cdb_len, 4770 inq_data, header); 4771 4772 return; 4773 } 4774 4775 /* 4776 * No specific printing routine, so use the generic routine. 4777 */ 4778 scsi_sense_generic_sbuf(sb, sense, sense_len, cdb, cdb_len, 4779 inq_data, header); 4780} 4781 4782scsi_sense_data_type 4783scsi_sense_type(struct scsi_sense_data *sense_data) 4784{ 4785 switch (sense_data->error_code & SSD_ERRCODE) { 4786 case SSD_DESC_CURRENT_ERROR: 4787 case SSD_DESC_DEFERRED_ERROR: 4788 return (SSD_TYPE_DESC); 4789 break; 4790 case SSD_CURRENT_ERROR: 4791 case SSD_DEFERRED_ERROR: 4792 return (SSD_TYPE_FIXED); 4793 break; 4794 default: 4795 break; 4796 } 4797 4798 return (SSD_TYPE_NONE); 4799} 4800 4801struct scsi_print_sense_info { 4802 struct sbuf *sb; 4803 char *path_str; 4804 uint8_t *cdb; 4805 int cdb_len; 4806 struct scsi_inquiry_data *inq_data; 4807}; 4808 4809static int 4810scsi_print_desc_func(struct scsi_sense_data_desc *sense, u_int sense_len, 4811 struct scsi_sense_desc_header *header, void *arg) 4812{ 4813 struct scsi_print_sense_info *print_info; 4814 4815 print_info = (struct scsi_print_sense_info *)arg; 4816 4817 switch (header->desc_type) { 4818 case SSD_DESC_INFO: 4819 case SSD_DESC_FRU: 4820 case SSD_DESC_COMMAND: 4821 case SSD_DESC_SKS: 4822 case SSD_DESC_BLOCK: 4823 case SSD_DESC_STREAM: 4824 /* 4825 * We have already printed these descriptors, if they are 4826 * present. 4827 */ 4828 break; 4829 default: { 4830 sbuf_printf(print_info->sb, "%s", print_info->path_str); 4831 scsi_sense_desc_sbuf(print_info->sb, 4832 (struct scsi_sense_data *)sense, sense_len, 4833 print_info->cdb, print_info->cdb_len, 4834 print_info->inq_data, header); 4835 sbuf_printf(print_info->sb, "\n"); 4836 break; 4837 } 4838 } 4839 4840 /* 4841 * Tell the iterator that we want to see more descriptors if they 4842 * are present. 4843 */ 4844 return (0); 4845} 4846 4847void 4848scsi_sense_only_sbuf(struct scsi_sense_data *sense, u_int sense_len, 4849 struct sbuf *sb, char *path_str, 4850 struct scsi_inquiry_data *inq_data, uint8_t *cdb, 4851 int cdb_len) 4852{ 4853 int error_code, sense_key, asc, ascq; 4854 4855 sbuf_cat(sb, path_str); 4856 4857 scsi_extract_sense_len(sense, sense_len, &error_code, &sense_key, 4858 &asc, &ascq, /*show_errors*/ 1); 4859 4860 sbuf_printf(sb, "SCSI sense: "); 4861 switch (error_code) { 4862 case SSD_DEFERRED_ERROR: 4863 case SSD_DESC_DEFERRED_ERROR: 4864 sbuf_printf(sb, "Deferred error: "); 4865 4866 /* FALLTHROUGH */ 4867 case SSD_CURRENT_ERROR: 4868 case SSD_DESC_CURRENT_ERROR: 4869 { 4870 struct scsi_sense_data_desc *desc_sense; 4871 struct scsi_print_sense_info print_info; 4872 const char *sense_key_desc; 4873 const char *asc_desc; 4874 uint8_t sks[3]; 4875 uint64_t val; 4876 uint8_t bits; 4877 4878 /* 4879 * Get descriptions for the sense key, ASC, and ASCQ. If 4880 * these aren't present in the sense data (i.e. the sense 4881 * data isn't long enough), the -1 values that 4882 * scsi_extract_sense_len() returns will yield default 4883 * or error descriptions. 4884 */ 4885 scsi_sense_desc(sense_key, asc, ascq, inq_data, 4886 &sense_key_desc, &asc_desc); 4887 4888 /* 4889 * We first print the sense key and ASC/ASCQ. 4890 */ 4891 sbuf_cat(sb, sense_key_desc); 4892 sbuf_printf(sb, " asc:%x,%x (%s)\n", asc, ascq, asc_desc); 4893 4894 /* 4895 * Print any block or stream device-specific information. 4896 */ 4897 if (scsi_get_block_info(sense, sense_len, inq_data, 4898 &bits) == 0 && bits != 0) { 4899 sbuf_cat(sb, path_str); 4900 scsi_block_sbuf(sb, bits); 4901 sbuf_printf(sb, "\n"); 4902 } else if (scsi_get_stream_info(sense, sense_len, inq_data, 4903 &bits) == 0 && bits != 0) { 4904 sbuf_cat(sb, path_str); 4905 scsi_stream_sbuf(sb, bits); 4906 sbuf_printf(sb, "\n"); 4907 } 4908 4909 /* 4910 * Print the info field. 4911 */ 4912 if (scsi_get_sense_info(sense, sense_len, SSD_DESC_INFO, 4913 &val, NULL) == 0) { 4914 sbuf_cat(sb, path_str); 4915 scsi_info_sbuf(sb, cdb, cdb_len, inq_data, val); 4916 sbuf_printf(sb, "\n"); 4917 } 4918 4919 /* 4920 * Print the FRU. 4921 */ 4922 if (scsi_get_sense_info(sense, sense_len, SSD_DESC_FRU, 4923 &val, NULL) == 0) { 4924 sbuf_cat(sb, path_str); 4925 scsi_fru_sbuf(sb, val); 4926 sbuf_printf(sb, "\n"); 4927 } 4928 4929 /* 4930 * Print any command-specific information. 4931 */ 4932 if (scsi_get_sense_info(sense, sense_len, SSD_DESC_COMMAND, 4933 &val, NULL) == 0) { 4934 sbuf_cat(sb, path_str); 4935 scsi_command_sbuf(sb, cdb, cdb_len, inq_data, val); 4936 sbuf_printf(sb, "\n"); 4937 } 4938 4939 /* 4940 * Print out any sense-key-specific information. 4941 */ 4942 if (scsi_get_sks(sense, sense_len, sks) == 0) { 4943 sbuf_cat(sb, path_str); 4944 scsi_sks_sbuf(sb, sense_key, sks); 4945 sbuf_printf(sb, "\n"); 4946 } 4947 4948 /* 4949 * If this is fixed sense, we're done. If we have 4950 * descriptor sense, we might have more information 4951 * available. 4952 */ 4953 if (scsi_sense_type(sense) != SSD_TYPE_DESC) 4954 break; 4955 4956 desc_sense = (struct scsi_sense_data_desc *)sense; 4957 4958 print_info.sb = sb; 4959 print_info.path_str = path_str; 4960 print_info.cdb = cdb; 4961 print_info.cdb_len = cdb_len; 4962 print_info.inq_data = inq_data; 4963 4964 /* 4965 * Print any sense descriptors that we have not already printed. 4966 */ 4967 scsi_desc_iterate(desc_sense, sense_len, scsi_print_desc_func, 4968 &print_info); 4969 break; 4970 4971 } 4972 case -1: 4973 /* 4974 * scsi_extract_sense_len() sets values to -1 if the 4975 * show_errors flag is set and they aren't present in the 4976 * sense data. This means that sense_len is 0. 4977 */ 4978 sbuf_printf(sb, "No sense data present\n"); 4979 break; 4980 default: { 4981 sbuf_printf(sb, "Error code 0x%x", error_code); 4982 if (sense->error_code & SSD_ERRCODE_VALID) { 4983 struct scsi_sense_data_fixed *fixed_sense; 4984 4985 fixed_sense = (struct scsi_sense_data_fixed *)sense; 4986 4987 if (SSD_FIXED_IS_PRESENT(fixed_sense, sense_len, info)){ 4988 uint32_t info; 4989 4990 info = scsi_4btoul(fixed_sense->info); 4991 4992 sbuf_printf(sb, " at block no. %d (decimal)", 4993 info); 4994 } 4995 } 4996 sbuf_printf(sb, "\n"); 4997 break; 4998 } 4999 } 5000} 5001 5002/* 5003 * scsi_sense_sbuf() returns 0 for success and -1 for failure. 5004 */ 5005#ifdef _KERNEL 5006int 5007scsi_sense_sbuf(struct ccb_scsiio *csio, struct sbuf *sb, 5008 scsi_sense_string_flags flags) 5009#else /* !_KERNEL */ 5010int 5011scsi_sense_sbuf(struct cam_device *device, struct ccb_scsiio *csio, 5012 struct sbuf *sb, scsi_sense_string_flags flags) 5013#endif /* _KERNEL/!_KERNEL */ 5014{ 5015 struct scsi_sense_data *sense; 5016 struct scsi_inquiry_data *inq_data; 5017#ifdef _KERNEL 5018 struct ccb_getdev *cgd; 5019#endif /* _KERNEL */ 5020 char path_str[64]; 5021 5022#ifndef _KERNEL 5023 if (device == NULL) 5024 return(-1); 5025#endif /* !_KERNEL */ 5026 if ((csio == NULL) || (sb == NULL)) 5027 return(-1); 5028 5029 /* 5030 * If the CDB is a physical address, we can't deal with it.. 5031 */ 5032 if ((csio->ccb_h.flags & CAM_CDB_PHYS) != 0) 5033 flags &= ~SSS_FLAG_PRINT_COMMAND; 5034 5035#ifdef _KERNEL 5036 xpt_path_string(csio->ccb_h.path, path_str, sizeof(path_str)); 5037#else /* !_KERNEL */ 5038 cam_path_string(device, path_str, sizeof(path_str)); 5039#endif /* _KERNEL/!_KERNEL */ 5040 5041#ifdef _KERNEL 5042 if ((cgd = (struct ccb_getdev*)xpt_alloc_ccb_nowait()) == NULL) 5043 return(-1); 5044 /* 5045 * Get the device information. 5046 */ 5047 xpt_setup_ccb(&cgd->ccb_h, 5048 csio->ccb_h.path, 5049 CAM_PRIORITY_NORMAL); 5050 cgd->ccb_h.func_code = XPT_GDEV_TYPE; 5051 xpt_action((union ccb *)cgd); 5052 5053 /* 5054 * If the device is unconfigured, just pretend that it is a hard 5055 * drive. scsi_op_desc() needs this. 5056 */ 5057 if (cgd->ccb_h.status == CAM_DEV_NOT_THERE) 5058 cgd->inq_data.device = T_DIRECT; 5059 5060 inq_data = &cgd->inq_data; 5061 5062#else /* !_KERNEL */ 5063 5064 inq_data = &device->inq_data; 5065 5066#endif /* _KERNEL/!_KERNEL */ 5067 5068 sense = NULL; 5069 5070 if (flags & SSS_FLAG_PRINT_COMMAND) { 5071 5072 sbuf_cat(sb, path_str); 5073 5074#ifdef _KERNEL 5075 scsi_command_string(csio, sb); 5076#else /* !_KERNEL */ 5077 scsi_command_string(device, csio, sb); 5078#endif /* _KERNEL/!_KERNEL */ 5079 sbuf_printf(sb, "\n"); 5080 } 5081 5082 /* 5083 * If the sense data is a physical pointer, forget it. 5084 */ 5085 if (csio->ccb_h.flags & CAM_SENSE_PTR) { 5086 if (csio->ccb_h.flags & CAM_SENSE_PHYS) { 5087#ifdef _KERNEL 5088 xpt_free_ccb((union ccb*)cgd); 5089#endif /* _KERNEL/!_KERNEL */ 5090 return(-1); 5091 } else { 5092 /* 5093 * bcopy the pointer to avoid unaligned access 5094 * errors on finicky architectures. We don't 5095 * ensure that the sense data is pointer aligned. 5096 */ 5097 bcopy((struct scsi_sense_data **)&csio->sense_data, 5098 &sense, sizeof(struct scsi_sense_data *)); 5099 } 5100 } else { 5101 /* 5102 * If the physical sense flag is set, but the sense pointer 5103 * is not also set, we assume that the user is an idiot and 5104 * return. (Well, okay, it could be that somehow, the 5105 * entire csio is physical, but we would have probably core 5106 * dumped on one of the bogus pointer deferences above 5107 * already.) 5108 */ 5109 if (csio->ccb_h.flags & CAM_SENSE_PHYS) { 5110#ifdef _KERNEL 5111 xpt_free_ccb((union ccb*)cgd); 5112#endif /* _KERNEL/!_KERNEL */ 5113 return(-1); 5114 } else 5115 sense = &csio->sense_data; 5116 } 5117 5118 scsi_sense_only_sbuf(sense, csio->sense_len - csio->sense_resid, sb, 5119 path_str, inq_data, scsiio_cdb_ptr(csio), csio->cdb_len); 5120 5121#ifdef _KERNEL 5122 xpt_free_ccb((union ccb*)cgd); 5123#endif /* _KERNEL/!_KERNEL */ 5124 return(0); 5125} 5126 5127 5128 5129#ifdef _KERNEL 5130char * 5131scsi_sense_string(struct ccb_scsiio *csio, char *str, int str_len) 5132#else /* !_KERNEL */ 5133char * 5134scsi_sense_string(struct cam_device *device, struct ccb_scsiio *csio, 5135 char *str, int str_len) 5136#endif /* _KERNEL/!_KERNEL */ 5137{ 5138 struct sbuf sb; 5139 5140 sbuf_new(&sb, str, str_len, 0); 5141 5142#ifdef _KERNEL 5143 scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND); 5144#else /* !_KERNEL */ 5145 scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND); 5146#endif /* _KERNEL/!_KERNEL */ 5147 5148 sbuf_finish(&sb); 5149 5150 return(sbuf_data(&sb)); 5151} 5152 5153#ifdef _KERNEL 5154void 5155scsi_sense_print(struct ccb_scsiio *csio) 5156{ 5157 struct sbuf sb; 5158 char str[512]; 5159 5160 sbuf_new(&sb, str, sizeof(str), 0); 5161 5162 scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND); 5163 5164 sbuf_finish(&sb); 5165 5166 sbuf_putbuf(&sb); 5167} 5168 5169#else /* !_KERNEL */ 5170void 5171scsi_sense_print(struct cam_device *device, struct ccb_scsiio *csio, 5172 FILE *ofile) 5173{ 5174 struct sbuf sb; 5175 char str[512]; 5176 5177 if ((device == NULL) || (csio == NULL) || (ofile == NULL)) 5178 return; 5179 5180 sbuf_new(&sb, str, sizeof(str), 0); 5181 5182 scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND); 5183 5184 sbuf_finish(&sb); 5185 5186 fprintf(ofile, "%s", sbuf_data(&sb)); 5187} 5188 5189#endif /* _KERNEL/!_KERNEL */ 5190 5191/* 5192 * Extract basic sense information. This is backward-compatible with the 5193 * previous implementation. For new implementations, 5194 * scsi_extract_sense_len() is recommended. 5195 */ 5196void 5197scsi_extract_sense(struct scsi_sense_data *sense_data, int *error_code, 5198 int *sense_key, int *asc, int *ascq) 5199{ 5200 scsi_extract_sense_len(sense_data, sizeof(*sense_data), error_code, 5201 sense_key, asc, ascq, /*show_errors*/ 0); 5202} 5203 5204/* 5205 * Extract basic sense information from SCSI I/O CCB structure. 5206 */ 5207int 5208scsi_extract_sense_ccb(union ccb *ccb, 5209 int *error_code, int *sense_key, int *asc, int *ascq) 5210{ 5211 struct scsi_sense_data *sense_data; 5212 5213 /* Make sure there are some sense data we can access. */ 5214 if (ccb->ccb_h.func_code != XPT_SCSI_IO || 5215 (ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_SCSI_STATUS_ERROR || 5216 (ccb->csio.scsi_status != SCSI_STATUS_CHECK_COND) || 5217 (ccb->ccb_h.status & CAM_AUTOSNS_VALID) == 0 || 5218 (ccb->ccb_h.flags & CAM_SENSE_PHYS)) 5219 return (0); 5220 5221 if (ccb->ccb_h.flags & CAM_SENSE_PTR) 5222 bcopy((struct scsi_sense_data **)&ccb->csio.sense_data, 5223 &sense_data, sizeof(struct scsi_sense_data *)); 5224 else 5225 sense_data = &ccb->csio.sense_data; 5226 scsi_extract_sense_len(sense_data, 5227 ccb->csio.sense_len - ccb->csio.sense_resid, 5228 error_code, sense_key, asc, ascq, 1); 5229 if (*error_code == -1) 5230 return (0); 5231 return (1); 5232} 5233 5234/* 5235 * Extract basic sense information. If show_errors is set, sense values 5236 * will be set to -1 if they are not present. 5237 */ 5238void 5239scsi_extract_sense_len(struct scsi_sense_data *sense_data, u_int sense_len, 5240 int *error_code, int *sense_key, int *asc, int *ascq, 5241 int show_errors) 5242{ 5243 /* 5244 * If we have no length, we have no sense. 5245 */ 5246 if (sense_len == 0) { 5247 if (show_errors == 0) { 5248 *error_code = 0; 5249 *sense_key = 0; 5250 *asc = 0; 5251 *ascq = 0; 5252 } else { 5253 *error_code = -1; 5254 *sense_key = -1; 5255 *asc = -1; 5256 *ascq = -1; 5257 } 5258 return; 5259 } 5260 5261 *error_code = sense_data->error_code & SSD_ERRCODE; 5262 5263 switch (*error_code) { 5264 case SSD_DESC_CURRENT_ERROR: 5265 case SSD_DESC_DEFERRED_ERROR: { 5266 struct scsi_sense_data_desc *sense; 5267 5268 sense = (struct scsi_sense_data_desc *)sense_data; 5269 5270 if (SSD_DESC_IS_PRESENT(sense, sense_len, sense_key)) 5271 *sense_key = sense->sense_key & SSD_KEY; 5272 else 5273 *sense_key = (show_errors) ? -1 : 0; 5274 5275 if (SSD_DESC_IS_PRESENT(sense, sense_len, add_sense_code)) 5276 *asc = sense->add_sense_code; 5277 else 5278 *asc = (show_errors) ? -1 : 0; 5279 5280 if (SSD_DESC_IS_PRESENT(sense, sense_len, add_sense_code_qual)) 5281 *ascq = sense->add_sense_code_qual; 5282 else 5283 *ascq = (show_errors) ? -1 : 0; 5284 break; 5285 } 5286 case SSD_CURRENT_ERROR: 5287 case SSD_DEFERRED_ERROR: 5288 default: { 5289 struct scsi_sense_data_fixed *sense; 5290 5291 sense = (struct scsi_sense_data_fixed *)sense_data; 5292 5293 if (SSD_FIXED_IS_PRESENT(sense, sense_len, flags)) 5294 *sense_key = sense->flags & SSD_KEY; 5295 else 5296 *sense_key = (show_errors) ? -1 : 0; 5297 5298 if ((SSD_FIXED_IS_PRESENT(sense, sense_len, add_sense_code)) 5299 && (SSD_FIXED_IS_FILLED(sense, add_sense_code))) 5300 *asc = sense->add_sense_code; 5301 else 5302 *asc = (show_errors) ? -1 : 0; 5303 5304 if ((SSD_FIXED_IS_PRESENT(sense, sense_len,add_sense_code_qual)) 5305 && (SSD_FIXED_IS_FILLED(sense, add_sense_code_qual))) 5306 *ascq = sense->add_sense_code_qual; 5307 else 5308 *ascq = (show_errors) ? -1 : 0; 5309 break; 5310 } 5311 } 5312} 5313 5314int 5315scsi_get_sense_key(struct scsi_sense_data *sense_data, u_int sense_len, 5316 int show_errors) 5317{ 5318 int error_code, sense_key, asc, ascq; 5319 5320 scsi_extract_sense_len(sense_data, sense_len, &error_code, 5321 &sense_key, &asc, &ascq, show_errors); 5322 5323 return (sense_key); 5324} 5325 5326int 5327scsi_get_asc(struct scsi_sense_data *sense_data, u_int sense_len, 5328 int show_errors) 5329{ 5330 int error_code, sense_key, asc, ascq; 5331 5332 scsi_extract_sense_len(sense_data, sense_len, &error_code, 5333 &sense_key, &asc, &ascq, show_errors); 5334 5335 return (asc); 5336} 5337 5338int 5339scsi_get_ascq(struct scsi_sense_data *sense_data, u_int sense_len, 5340 int show_errors) 5341{ 5342 int error_code, sense_key, asc, ascq; 5343 5344 scsi_extract_sense_len(sense_data, sense_len, &error_code, 5345 &sense_key, &asc, &ascq, show_errors); 5346 5347 return (ascq); 5348} 5349 5350/* 5351 * This function currently requires at least 36 bytes, or 5352 * SHORT_INQUIRY_LENGTH, worth of data to function properly. If this 5353 * function needs more or less data in the future, another length should be 5354 * defined in scsi_all.h to indicate the minimum amount of data necessary 5355 * for this routine to function properly. 5356 */ 5357void 5358scsi_print_inquiry_sbuf(struct sbuf *sb, struct scsi_inquiry_data *inq_data) 5359{ 5360 u_int8_t type; 5361 char *dtype, *qtype; 5362 5363 type = SID_TYPE(inq_data); 5364 5365 /* 5366 * Figure out basic device type and qualifier. 5367 */ 5368 if (SID_QUAL_IS_VENDOR_UNIQUE(inq_data)) { 5369 qtype = " (vendor-unique qualifier)"; 5370 } else { 5371 switch (SID_QUAL(inq_data)) { 5372 case SID_QUAL_LU_CONNECTED: 5373 qtype = ""; 5374 break; 5375 5376 case SID_QUAL_LU_OFFLINE: 5377 qtype = " (offline)"; 5378 break; 5379 5380 case SID_QUAL_RSVD: 5381 qtype = " (reserved qualifier)"; 5382 break; 5383 default: 5384 case SID_QUAL_BAD_LU: 5385 qtype = " (LUN not supported)"; 5386 break; 5387 } 5388 } 5389 5390 switch (type) { 5391 case T_DIRECT: 5392 dtype = "Direct Access"; 5393 break; 5394 case T_SEQUENTIAL: 5395 dtype = "Sequential Access"; 5396 break; 5397 case T_PRINTER: 5398 dtype = "Printer"; 5399 break; 5400 case T_PROCESSOR: 5401 dtype = "Processor"; 5402 break; 5403 case T_WORM: 5404 dtype = "WORM"; 5405 break; 5406 case T_CDROM: 5407 dtype = "CD-ROM"; 5408 break; 5409 case T_SCANNER: 5410 dtype = "Scanner"; 5411 break; 5412 case T_OPTICAL: 5413 dtype = "Optical"; 5414 break; 5415 case T_CHANGER: 5416 dtype = "Changer"; 5417 break; 5418 case T_COMM: 5419 dtype = "Communication"; 5420 break; 5421 case T_STORARRAY: 5422 dtype = "Storage Array"; 5423 break; 5424 case T_ENCLOSURE: 5425 dtype = "Enclosure Services"; 5426 break; 5427 case T_RBC: 5428 dtype = "Simplified Direct Access"; 5429 break; 5430 case T_OCRW: 5431 dtype = "Optical Card Read/Write"; 5432 break; 5433 case T_OSD: 5434 dtype = "Object-Based Storage"; 5435 break; 5436 case T_ADC: 5437 dtype = "Automation/Drive Interface"; 5438 break; 5439 case T_ZBC_HM: 5440 dtype = "Host Managed Zoned Block"; 5441 break; 5442 case T_NODEVICE: 5443 dtype = "Uninstalled"; 5444 break; 5445 default: 5446 dtype = "unknown"; 5447 break; 5448 } 5449 5450 scsi_print_inquiry_short_sbuf(sb, inq_data); 5451 5452 sbuf_printf(sb, "%s %s ", SID_IS_REMOVABLE(inq_data) ? "Removable" : "Fixed", dtype); 5453 5454 if (SID_ANSI_REV(inq_data) == SCSI_REV_0) 5455 sbuf_printf(sb, "SCSI "); 5456 else if (SID_ANSI_REV(inq_data) <= SCSI_REV_SPC) { 5457 sbuf_printf(sb, "SCSI-%d ", SID_ANSI_REV(inq_data)); 5458 } else { 5459 sbuf_printf(sb, "SPC-%d SCSI ", SID_ANSI_REV(inq_data) - 2); 5460 } 5461 sbuf_printf(sb, "device%s\n", qtype); 5462} 5463 5464void 5465scsi_print_inquiry(struct scsi_inquiry_data *inq_data) 5466{ 5467 struct sbuf sb; 5468 char buffer[120]; 5469 5470 sbuf_new(&sb, buffer, 120, SBUF_FIXEDLEN); 5471 scsi_print_inquiry_sbuf(&sb, inq_data); 5472 sbuf_finish(&sb); 5473 sbuf_putbuf(&sb); 5474} 5475 5476void 5477scsi_print_inquiry_short_sbuf(struct sbuf *sb, struct scsi_inquiry_data *inq_data) 5478{ 5479 5480 sbuf_printf(sb, "<"); 5481 cam_strvis_sbuf(sb, inq_data->vendor, sizeof(inq_data->vendor), 0); 5482 sbuf_printf(sb, " "); 5483 cam_strvis_sbuf(sb, inq_data->product, sizeof(inq_data->product), 0); 5484 sbuf_printf(sb, " "); 5485 cam_strvis_sbuf(sb, inq_data->revision, sizeof(inq_data->revision), 0); 5486 sbuf_printf(sb, "> "); 5487} 5488 5489void 5490scsi_print_inquiry_short(struct scsi_inquiry_data *inq_data) 5491{ 5492 struct sbuf sb; 5493 char buffer[84]; 5494 5495 sbuf_new(&sb, buffer, 84, SBUF_FIXEDLEN); 5496 scsi_print_inquiry_short_sbuf(&sb, inq_data); 5497 sbuf_finish(&sb); 5498 sbuf_putbuf(&sb); 5499} 5500 5501/* 5502 * Table of syncrates that don't follow the "divisible by 4" 5503 * rule. This table will be expanded in future SCSI specs. 5504 */ 5505static struct { 5506 u_int period_factor; 5507 u_int period; /* in 100ths of ns */ 5508} scsi_syncrates[] = { 5509 { 0x08, 625 }, /* FAST-160 */ 5510 { 0x09, 1250 }, /* FAST-80 */ 5511 { 0x0a, 2500 }, /* FAST-40 40MHz */ 5512 { 0x0b, 3030 }, /* FAST-40 33MHz */ 5513 { 0x0c, 5000 } /* FAST-20 */ 5514}; 5515 5516/* 5517 * Return the frequency in kHz corresponding to the given 5518 * sync period factor. 5519 */ 5520u_int 5521scsi_calc_syncsrate(u_int period_factor) 5522{ 5523 u_int i; 5524 u_int num_syncrates; 5525 5526 /* 5527 * It's a bug if period is zero, but if it is anyway, don't 5528 * die with a divide fault- instead return something which 5529 * 'approximates' async 5530 */ 5531 if (period_factor == 0) { 5532 return (3300); 5533 } 5534 5535 num_syncrates = nitems(scsi_syncrates); 5536 /* See if the period is in the "exception" table */ 5537 for (i = 0; i < num_syncrates; i++) { 5538 5539 if (period_factor == scsi_syncrates[i].period_factor) { 5540 /* Period in kHz */ 5541 return (100000000 / scsi_syncrates[i].period); 5542 } 5543 } 5544 5545 /* 5546 * Wasn't in the table, so use the standard 5547 * 4 times conversion. 5548 */ 5549 return (10000000 / (period_factor * 4 * 10)); 5550} 5551 5552/* 5553 * Return the SCSI sync parameter that corresponds to 5554 * the passed in period in 10ths of ns. 5555 */ 5556u_int 5557scsi_calc_syncparam(u_int period) 5558{ 5559 u_int i; 5560 u_int num_syncrates; 5561 5562 if (period == 0) 5563 return (~0); /* Async */ 5564 5565 /* Adjust for exception table being in 100ths. */ 5566 period *= 10; 5567 num_syncrates = nitems(scsi_syncrates); 5568 /* See if the period is in the "exception" table */ 5569 for (i = 0; i < num_syncrates; i++) { 5570 5571 if (period <= scsi_syncrates[i].period) { 5572 /* Period in 100ths of ns */ 5573 return (scsi_syncrates[i].period_factor); 5574 } 5575 } 5576 5577 /* 5578 * Wasn't in the table, so use the standard 5579 * 1/4 period in ns conversion. 5580 */ 5581 return (period/400); 5582} 5583 5584int 5585scsi_devid_is_naa_ieee_reg(uint8_t *bufp) 5586{ 5587 struct scsi_vpd_id_descriptor *descr; 5588 struct scsi_vpd_id_naa_basic *naa; 5589 int n; 5590 5591 descr = (struct scsi_vpd_id_descriptor *)bufp; 5592 naa = (struct scsi_vpd_id_naa_basic *)descr->identifier; 5593 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_NAA) 5594 return 0; 5595 if (descr->length < sizeof(struct scsi_vpd_id_naa_ieee_reg)) 5596 return 0; 5597 n = naa->naa >> SVPD_ID_NAA_NAA_SHIFT; 5598 if (n != SVPD_ID_NAA_LOCAL_REG && n != SVPD_ID_NAA_IEEE_REG) 5599 return 0; 5600 return 1; 5601} 5602 5603int 5604scsi_devid_is_sas_target(uint8_t *bufp) 5605{ 5606 struct scsi_vpd_id_descriptor *descr; 5607 5608 descr = (struct scsi_vpd_id_descriptor *)bufp; 5609 if (!scsi_devid_is_naa_ieee_reg(bufp)) 5610 return 0; 5611 if ((descr->id_type & SVPD_ID_PIV) == 0) /* proto field reserved */ 5612 return 0; 5613 if ((descr->proto_codeset >> SVPD_ID_PROTO_SHIFT) != SCSI_PROTO_SAS) 5614 return 0; 5615 return 1; 5616} 5617 5618int 5619scsi_devid_is_lun_eui64(uint8_t *bufp) 5620{ 5621 struct scsi_vpd_id_descriptor *descr; 5622 5623 descr = (struct scsi_vpd_id_descriptor *)bufp; 5624 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_LUN) 5625 return 0; 5626 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_EUI64) 5627 return 0; 5628 return 1; 5629} 5630 5631int 5632scsi_devid_is_lun_naa(uint8_t *bufp) 5633{ 5634 struct scsi_vpd_id_descriptor *descr; 5635 5636 descr = (struct scsi_vpd_id_descriptor *)bufp; 5637 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_LUN) 5638 return 0; 5639 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_NAA) 5640 return 0; 5641 return 1; 5642} 5643 5644int 5645scsi_devid_is_lun_t10(uint8_t *bufp) 5646{ 5647 struct scsi_vpd_id_descriptor *descr; 5648 5649 descr = (struct scsi_vpd_id_descriptor *)bufp; 5650 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_LUN) 5651 return 0; 5652 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_T10) 5653 return 0; 5654 return 1; 5655} 5656 5657int 5658scsi_devid_is_lun_name(uint8_t *bufp) 5659{ 5660 struct scsi_vpd_id_descriptor *descr; 5661 5662 descr = (struct scsi_vpd_id_descriptor *)bufp; 5663 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_LUN) 5664 return 0; 5665 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_SCSI_NAME) 5666 return 0; 5667 return 1; 5668} 5669 5670int 5671scsi_devid_is_lun_md5(uint8_t *bufp) 5672{ 5673 struct scsi_vpd_id_descriptor *descr; 5674 5675 descr = (struct scsi_vpd_id_descriptor *)bufp; 5676 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_LUN) 5677 return 0; 5678 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_MD5_LUN_ID) 5679 return 0; 5680 return 1; 5681} 5682 5683int 5684scsi_devid_is_lun_uuid(uint8_t *bufp) 5685{ 5686 struct scsi_vpd_id_descriptor *descr; 5687 5688 descr = (struct scsi_vpd_id_descriptor *)bufp; 5689 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_LUN) 5690 return 0; 5691 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_UUID) 5692 return 0; 5693 return 1; 5694} 5695 5696int 5697scsi_devid_is_port_naa(uint8_t *bufp) 5698{ 5699 struct scsi_vpd_id_descriptor *descr; 5700 5701 descr = (struct scsi_vpd_id_descriptor *)bufp; 5702 if ((descr->id_type & SVPD_ID_ASSOC_MASK) != SVPD_ID_ASSOC_PORT) 5703 return 0; 5704 if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_NAA) 5705 return 0; 5706 return 1; 5707} 5708 5709struct scsi_vpd_id_descriptor * 5710scsi_get_devid_desc(struct scsi_vpd_id_descriptor *desc, uint32_t len, 5711 scsi_devid_checkfn_t ck_fn) 5712{ 5713 uint8_t *desc_buf_end; 5714 5715 desc_buf_end = (uint8_t *)desc + len; 5716 5717 for (; desc->identifier <= desc_buf_end && 5718 desc->identifier + desc->length <= desc_buf_end; 5719 desc = (struct scsi_vpd_id_descriptor *)(desc->identifier 5720 + desc->length)) { 5721 5722 if (ck_fn == NULL || ck_fn((uint8_t *)desc) != 0) 5723 return (desc); 5724 } 5725 return (NULL); 5726} 5727 5728struct scsi_vpd_id_descriptor * 5729scsi_get_devid(struct scsi_vpd_device_id *id, uint32_t page_len, 5730 scsi_devid_checkfn_t ck_fn) 5731{ 5732 uint32_t len; 5733 5734 if (page_len < sizeof(*id)) 5735 return (NULL); 5736 len = MIN(scsi_2btoul(id->length), page_len - sizeof(*id)); 5737 return (scsi_get_devid_desc((struct scsi_vpd_id_descriptor *) 5738 id->desc_list, len, ck_fn)); 5739} 5740 5741int 5742scsi_transportid_sbuf(struct sbuf *sb, struct scsi_transportid_header *hdr, 5743 uint32_t valid_len) 5744{ 5745 switch (hdr->format_protocol & SCSI_TRN_PROTO_MASK) { 5746 case SCSI_PROTO_FC: { 5747 struct scsi_transportid_fcp *fcp; 5748 uint64_t n_port_name; 5749 5750 fcp = (struct scsi_transportid_fcp *)hdr; 5751 5752 n_port_name = scsi_8btou64(fcp->n_port_name); 5753 5754 sbuf_printf(sb, "FCP address: 0x%.16jx",(uintmax_t)n_port_name); 5755 break; 5756 } 5757 case SCSI_PROTO_SPI: { 5758 struct scsi_transportid_spi *spi; 5759 5760 spi = (struct scsi_transportid_spi *)hdr; 5761 5762 sbuf_printf(sb, "SPI address: %u,%u", 5763 scsi_2btoul(spi->scsi_addr), 5764 scsi_2btoul(spi->rel_trgt_port_id)); 5765 break; 5766 } 5767 case SCSI_PROTO_SSA: 5768 /* 5769 * XXX KDM there is no transport ID defined in SPC-4 for 5770 * SSA. 5771 */ 5772 break; 5773 case SCSI_PROTO_1394: { 5774 struct scsi_transportid_1394 *sbp; 5775 uint64_t eui64; 5776 5777 sbp = (struct scsi_transportid_1394 *)hdr; 5778 5779 eui64 = scsi_8btou64(sbp->eui64); 5780 sbuf_printf(sb, "SBP address: 0x%.16jx", (uintmax_t)eui64); 5781 break; 5782 } 5783 case SCSI_PROTO_RDMA: { 5784 struct scsi_transportid_rdma *rdma; 5785 unsigned int i; 5786 5787 rdma = (struct scsi_transportid_rdma *)hdr; 5788 5789 sbuf_printf(sb, "RDMA address: 0x"); 5790 for (i = 0; i < sizeof(rdma->initiator_port_id); i++) 5791 sbuf_printf(sb, "%02x", rdma->initiator_port_id[i]); 5792 break; 5793 } 5794 case SCSI_PROTO_ISCSI: { 5795 uint32_t add_len, i; 5796 uint8_t *iscsi_name = NULL; 5797 int nul_found = 0; 5798 5799 sbuf_printf(sb, "iSCSI address: "); 5800 if ((hdr->format_protocol & SCSI_TRN_FORMAT_MASK) == 5801 SCSI_TRN_ISCSI_FORMAT_DEVICE) { 5802 struct scsi_transportid_iscsi_device *dev; 5803 5804 dev = (struct scsi_transportid_iscsi_device *)hdr; 5805 5806 /* 5807 * Verify how much additional data we really have. 5808 */ 5809 add_len = scsi_2btoul(dev->additional_length); 5810 add_len = MIN(add_len, valid_len - 5811 __offsetof(struct scsi_transportid_iscsi_device, 5812 iscsi_name)); 5813 iscsi_name = &dev->iscsi_name[0]; 5814 5815 } else if ((hdr->format_protocol & SCSI_TRN_FORMAT_MASK) == 5816 SCSI_TRN_ISCSI_FORMAT_PORT) { 5817 struct scsi_transportid_iscsi_port *port; 5818 5819 port = (struct scsi_transportid_iscsi_port *)hdr; 5820 5821 add_len = scsi_2btoul(port->additional_length); 5822 add_len = MIN(add_len, valid_len - 5823 __offsetof(struct scsi_transportid_iscsi_port, 5824 iscsi_name)); 5825 iscsi_name = &port->iscsi_name[0]; 5826 } else { 5827 sbuf_printf(sb, "unknown format %x", 5828 (hdr->format_protocol & 5829 SCSI_TRN_FORMAT_MASK) >> 5830 SCSI_TRN_FORMAT_SHIFT); 5831 break; 5832 } 5833 if (add_len == 0) { 5834 sbuf_printf(sb, "not enough data"); 5835 break; 5836 } 5837 /* 5838 * This is supposed to be a NUL-terminated ASCII 5839 * string, but you never know. So we're going to 5840 * check. We need to do this because there is no 5841 * sbuf equivalent of strncat(). 5842 */ 5843 for (i = 0; i < add_len; i++) { 5844 if (iscsi_name[i] == '\0') { 5845 nul_found = 1; 5846 break; 5847 } 5848 } 5849 /* 5850 * If there is a NUL in the name, we can just use 5851 * sbuf_cat(). Otherwise we need to use sbuf_bcat(). 5852 */ 5853 if (nul_found != 0) 5854 sbuf_cat(sb, iscsi_name); 5855 else 5856 sbuf_bcat(sb, iscsi_name, add_len); 5857 break; 5858 } 5859 case SCSI_PROTO_SAS: { 5860 struct scsi_transportid_sas *sas; 5861 uint64_t sas_addr; 5862 5863 sas = (struct scsi_transportid_sas *)hdr; 5864 5865 sas_addr = scsi_8btou64(sas->sas_address); 5866 sbuf_printf(sb, "SAS address: 0x%.16jx", (uintmax_t)sas_addr); 5867 break; 5868 } 5869 case SCSI_PROTO_ADITP: 5870 case SCSI_PROTO_ATA: 5871 case SCSI_PROTO_UAS: 5872 /* 5873 * No Transport ID format for ADI, ATA or USB is defined in 5874 * SPC-4. 5875 */ 5876 sbuf_printf(sb, "No known Transport ID format for protocol " 5877 "%#x", hdr->format_protocol & SCSI_TRN_PROTO_MASK); 5878 break; 5879 case SCSI_PROTO_SOP: { 5880 struct scsi_transportid_sop *sop; 5881 struct scsi_sop_routing_id_norm *rid; 5882 5883 sop = (struct scsi_transportid_sop *)hdr; 5884 rid = (struct scsi_sop_routing_id_norm *)sop->routing_id; 5885 5886 /* 5887 * Note that there is no alternate format specified in SPC-4 5888 * for the PCIe routing ID, so we don't really have a way 5889 * to know whether the second byte of the routing ID is 5890 * a device and function or just a function. So we just 5891 * assume bus,device,function. 5892 */ 5893 sbuf_printf(sb, "SOP Routing ID: %u,%u,%u", 5894 rid->bus, rid->devfunc >> SCSI_TRN_SOP_DEV_SHIFT, 5895 rid->devfunc & SCSI_TRN_SOP_FUNC_NORM_MAX); 5896 break; 5897 } 5898 case SCSI_PROTO_NONE: 5899 default: 5900 sbuf_printf(sb, "Unknown protocol %#x", 5901 hdr->format_protocol & SCSI_TRN_PROTO_MASK); 5902 break; 5903 } 5904 5905 return (0); 5906} 5907 5908struct scsi_nv scsi_proto_map[] = { 5909 { "fcp", SCSI_PROTO_FC }, 5910 { "spi", SCSI_PROTO_SPI }, 5911 { "ssa", SCSI_PROTO_SSA }, 5912 { "sbp", SCSI_PROTO_1394 }, 5913 { "1394", SCSI_PROTO_1394 }, 5914 { "srp", SCSI_PROTO_RDMA }, 5915 { "rdma", SCSI_PROTO_RDMA }, 5916 { "iscsi", SCSI_PROTO_ISCSI }, 5917 { "iqn", SCSI_PROTO_ISCSI }, 5918 { "sas", SCSI_PROTO_SAS }, 5919 { "aditp", SCSI_PROTO_ADITP }, 5920 { "ata", SCSI_PROTO_ATA }, 5921 { "uas", SCSI_PROTO_UAS }, 5922 { "usb", SCSI_PROTO_UAS }, 5923 { "sop", SCSI_PROTO_SOP } 5924}; 5925 5926const char * 5927scsi_nv_to_str(struct scsi_nv *table, int num_table_entries, uint64_t value) 5928{ 5929 int i; 5930 5931 for (i = 0; i < num_table_entries; i++) { 5932 if (table[i].value == value) 5933 return (table[i].name); 5934 } 5935 5936 return (NULL); 5937} 5938 5939/* 5940 * Given a name/value table, find a value matching the given name. 5941 * Return values: 5942 * SCSI_NV_FOUND - match found 5943 * SCSI_NV_AMBIGUOUS - more than one match, none of them exact 5944 * SCSI_NV_NOT_FOUND - no match found 5945 */ 5946scsi_nv_status 5947scsi_get_nv(struct scsi_nv *table, int num_table_entries, 5948 char *name, int *table_entry, scsi_nv_flags flags) 5949{ 5950 int i, num_matches = 0; 5951 5952 for (i = 0; i < num_table_entries; i++) { 5953 size_t table_len, name_len; 5954 5955 table_len = strlen(table[i].name); 5956 name_len = strlen(name); 5957 5958 if ((((flags & SCSI_NV_FLAG_IG_CASE) != 0) 5959 && (strncasecmp(table[i].name, name, name_len) == 0)) 5960 || (((flags & SCSI_NV_FLAG_IG_CASE) == 0) 5961 && (strncmp(table[i].name, name, name_len) == 0))) { 5962 *table_entry = i; 5963 5964 /* 5965 * Check for an exact match. If we have the same 5966 * number of characters in the table as the argument, 5967 * and we already know they're the same, we have 5968 * an exact match. 5969 */ 5970 if (table_len == name_len) 5971 return (SCSI_NV_FOUND); 5972 5973 /* 5974 * Otherwise, bump up the number of matches. We'll 5975 * see later how many we have. 5976 */ 5977 num_matches++; 5978 } 5979 } 5980 5981 if (num_matches > 1) 5982 return (SCSI_NV_AMBIGUOUS); 5983 else if (num_matches == 1) 5984 return (SCSI_NV_FOUND); 5985 else 5986 return (SCSI_NV_NOT_FOUND); 5987} 5988 5989/* 5990 * Parse transport IDs for Fibre Channel, 1394 and SAS. Since these are 5991 * all 64-bit numbers, the code is similar. 5992 */ 5993int 5994scsi_parse_transportid_64bit(int proto_id, char *id_str, 5995 struct scsi_transportid_header **hdr, 5996 unsigned int *alloc_len, 5997#ifdef _KERNEL 5998 struct malloc_type *type, int flags, 5999#endif 6000 char *error_str, int error_str_len) 6001{ 6002 uint64_t value; 6003 char *endptr; 6004 int retval; 6005 size_t alloc_size; 6006 6007 retval = 0; 6008 6009 value = strtouq(id_str, &endptr, 0); 6010 if (*endptr != '\0') { 6011 if (error_str != NULL) { 6012 snprintf(error_str, error_str_len, "%s: error " 6013 "parsing ID %s, 64-bit number required", 6014 __func__, id_str); 6015 } 6016 retval = 1; 6017 goto bailout; 6018 } 6019 6020 switch (proto_id) { 6021 case SCSI_PROTO_FC: 6022 alloc_size = sizeof(struct scsi_transportid_fcp); 6023 break; 6024 case SCSI_PROTO_1394: 6025 alloc_size = sizeof(struct scsi_transportid_1394); 6026 break; 6027 case SCSI_PROTO_SAS: 6028 alloc_size = sizeof(struct scsi_transportid_sas); 6029 break; 6030 default: 6031 if (error_str != NULL) { 6032 snprintf(error_str, error_str_len, "%s: unsupported " 6033 "protocol %d", __func__, proto_id); 6034 } 6035 retval = 1; 6036 goto bailout; 6037 break; /* NOTREACHED */ 6038 } 6039#ifdef _KERNEL 6040 *hdr = malloc(alloc_size, type, flags); 6041#else /* _KERNEL */ 6042 *hdr = malloc(alloc_size); 6043#endif /*_KERNEL */ 6044 if (*hdr == NULL) { 6045 if (error_str != NULL) { 6046 snprintf(error_str, error_str_len, "%s: unable to " 6047 "allocate %zu bytes", __func__, alloc_size); 6048 } 6049 retval = 1; 6050 goto bailout; 6051 } 6052 6053 *alloc_len = alloc_size; 6054 6055 bzero(*hdr, alloc_size); 6056 6057 switch (proto_id) { 6058 case SCSI_PROTO_FC: { 6059 struct scsi_transportid_fcp *fcp; 6060 6061 fcp = (struct scsi_transportid_fcp *)(*hdr); 6062 fcp->format_protocol = SCSI_PROTO_FC | 6063 SCSI_TRN_FCP_FORMAT_DEFAULT; 6064 scsi_u64to8b(value, fcp->n_port_name); 6065 break; 6066 } 6067 case SCSI_PROTO_1394: { 6068 struct scsi_transportid_1394 *sbp; 6069 6070 sbp = (struct scsi_transportid_1394 *)(*hdr); 6071 sbp->format_protocol = SCSI_PROTO_1394 | 6072 SCSI_TRN_1394_FORMAT_DEFAULT; 6073 scsi_u64to8b(value, sbp->eui64); 6074 break; 6075 } 6076 case SCSI_PROTO_SAS: { 6077 struct scsi_transportid_sas *sas; 6078 6079 sas = (struct scsi_transportid_sas *)(*hdr); 6080 sas->format_protocol = SCSI_PROTO_SAS | 6081 SCSI_TRN_SAS_FORMAT_DEFAULT; 6082 scsi_u64to8b(value, sas->sas_address); 6083 break; 6084 } 6085 default: 6086 break; 6087 } 6088bailout: 6089 return (retval); 6090} 6091 6092/* 6093 * Parse a SPI (Parallel SCSI) address of the form: id,rel_tgt_port 6094 */ 6095int 6096scsi_parse_transportid_spi(char *id_str, struct scsi_transportid_header **hdr, 6097 unsigned int *alloc_len, 6098#ifdef _KERNEL 6099 struct malloc_type *type, int flags, 6100#endif 6101 char *error_str, int error_str_len) 6102{ 6103 unsigned long scsi_addr, target_port; 6104 struct scsi_transportid_spi *spi; 6105 char *tmpstr, *endptr; 6106 int retval; 6107 6108 retval = 0; 6109 6110 tmpstr = strsep(&id_str, ","); 6111 if (tmpstr == NULL) { 6112 if (error_str != NULL) { 6113 snprintf(error_str, error_str_len, 6114 "%s: no ID found", __func__); 6115 } 6116 retval = 1; 6117 goto bailout; 6118 } 6119 scsi_addr = strtoul(tmpstr, &endptr, 0); 6120 if (*endptr != '\0') { 6121 if (error_str != NULL) { 6122 snprintf(error_str, error_str_len, "%s: error " 6123 "parsing SCSI ID %s, number required", 6124 __func__, tmpstr); 6125 } 6126 retval = 1; 6127 goto bailout; 6128 } 6129 6130 if (id_str == NULL) { 6131 if (error_str != NULL) { 6132 snprintf(error_str, error_str_len, "%s: no relative " 6133 "target port found", __func__); 6134 } 6135 retval = 1; 6136 goto bailout; 6137 } 6138 6139 target_port = strtoul(id_str, &endptr, 0); 6140 if (*endptr != '\0') { 6141 if (error_str != NULL) { 6142 snprintf(error_str, error_str_len, "%s: error " 6143 "parsing relative target port %s, number " 6144 "required", __func__, id_str); 6145 } 6146 retval = 1; 6147 goto bailout; 6148 } 6149#ifdef _KERNEL 6150 spi = malloc(sizeof(*spi), type, flags); 6151#else 6152 spi = malloc(sizeof(*spi)); 6153#endif 6154 if (spi == NULL) { 6155 if (error_str != NULL) { 6156 snprintf(error_str, error_str_len, "%s: unable to " 6157 "allocate %zu bytes", __func__, 6158 sizeof(*spi)); 6159 } 6160 retval = 1; 6161 goto bailout; 6162 } 6163 *alloc_len = sizeof(*spi); 6164 bzero(spi, sizeof(*spi)); 6165 6166 spi->format_protocol = SCSI_PROTO_SPI | SCSI_TRN_SPI_FORMAT_DEFAULT; 6167 scsi_ulto2b(scsi_addr, spi->scsi_addr); 6168 scsi_ulto2b(target_port, spi->rel_trgt_port_id); 6169 6170 *hdr = (struct scsi_transportid_header *)spi; 6171bailout: 6172 return (retval); 6173} 6174 6175/* 6176 * Parse an RDMA/SRP Initiator Port ID string. This is 32 hexadecimal digits, 6177 * optionally prefixed by "0x" or "0X". 6178 */ 6179int 6180scsi_parse_transportid_rdma(char *id_str, struct scsi_transportid_header **hdr, 6181 unsigned int *alloc_len, 6182#ifdef _KERNEL 6183 struct malloc_type *type, int flags, 6184#endif 6185 char *error_str, int error_str_len) 6186{ 6187 struct scsi_transportid_rdma *rdma; 6188 int retval; 6189 size_t id_len, rdma_id_size; 6190 uint8_t rdma_id[SCSI_TRN_RDMA_PORT_LEN]; 6191 char *tmpstr; 6192 unsigned int i, j; 6193 6194 retval = 0; 6195 id_len = strlen(id_str); 6196 rdma_id_size = SCSI_TRN_RDMA_PORT_LEN; 6197 6198 /* 6199 * Check the size. It needs to be either 32 or 34 characters long. 6200 */ 6201 if ((id_len != (rdma_id_size * 2)) 6202 && (id_len != ((rdma_id_size * 2) + 2))) { 6203 if (error_str != NULL) { 6204 snprintf(error_str, error_str_len, "%s: RDMA ID " 6205 "must be 32 hex digits (0x prefix " 6206 "optional), only %zu seen", __func__, id_len); 6207 } 6208 retval = 1; 6209 goto bailout; 6210 } 6211 6212 tmpstr = id_str; 6213 /* 6214 * If the user gave us 34 characters, the string needs to start 6215 * with '0x'. 6216 */ 6217 if (id_len == ((rdma_id_size * 2) + 2)) { 6218 if ((tmpstr[0] == '0') 6219 && ((tmpstr[1] == 'x') || (tmpstr[1] == 'X'))) { 6220 tmpstr += 2; 6221 } else { 6222 if (error_str != NULL) { 6223 snprintf(error_str, error_str_len, "%s: RDMA " 6224 "ID prefix, if used, must be \"0x\", " 6225 "got %s", __func__, tmpstr); 6226 } 6227 retval = 1; 6228 goto bailout; 6229 } 6230 } 6231 bzero(rdma_id, sizeof(rdma_id)); 6232 6233 /* 6234 * Convert ASCII hex into binary bytes. There is no standard 6235 * 128-bit integer type, and so no strtou128t() routine to convert 6236 * from hex into a large integer. In the end, we're not going to 6237 * an integer, but rather to a byte array, so that and the fact 6238 * that we require the user to give us 32 hex digits simplifies the 6239 * logic. 6240 */ 6241 for (i = 0; i < (rdma_id_size * 2); i++) { 6242 int cur_shift; 6243 unsigned char c; 6244 6245 /* Increment the byte array one for every 2 hex digits */ 6246 j = i >> 1; 6247 6248 /* 6249 * The first digit in every pair is the most significant 6250 * 4 bits. The second is the least significant 4 bits. 6251 */ 6252 if ((i % 2) == 0) 6253 cur_shift = 4; 6254 else 6255 cur_shift = 0; 6256 6257 c = tmpstr[i]; 6258 /* Convert the ASCII hex character into a number */ 6259 if (isdigit(c)) 6260 c -= '0'; 6261 else if (isalpha(c)) 6262 c -= isupper(c) ? 'A' - 10 : 'a' - 10; 6263 else { 6264 if (error_str != NULL) { 6265 snprintf(error_str, error_str_len, "%s: " 6266 "RDMA ID must be hex digits, got " 6267 "invalid character %c", __func__, 6268 tmpstr[i]); 6269 } 6270 retval = 1; 6271 goto bailout; 6272 } 6273 /* 6274 * The converted number can't be less than 0; the type is 6275 * unsigned, and the subtraction logic will not give us 6276 * a negative number. So we only need to make sure that 6277 * the value is not greater than 0xf. (i.e. make sure the 6278 * user didn't give us a value like "0x12jklmno"). 6279 */ 6280 if (c > 0xf) { 6281 if (error_str != NULL) { 6282 snprintf(error_str, error_str_len, "%s: " 6283 "RDMA ID must be hex digits, got " 6284 "invalid character %c", __func__, 6285 tmpstr[i]); 6286 } 6287 retval = 1; 6288 goto bailout; 6289 } 6290 6291 rdma_id[j] |= c << cur_shift; 6292 } 6293 6294#ifdef _KERNEL 6295 rdma = malloc(sizeof(*rdma), type, flags); 6296#else 6297 rdma = malloc(sizeof(*rdma)); 6298#endif 6299 if (rdma == NULL) { 6300 if (error_str != NULL) { 6301 snprintf(error_str, error_str_len, "%s: unable to " 6302 "allocate %zu bytes", __func__, 6303 sizeof(*rdma)); 6304 } 6305 retval = 1; 6306 goto bailout; 6307 } 6308 *alloc_len = sizeof(*rdma); 6309 bzero(rdma, *alloc_len); 6310 6311 rdma->format_protocol = SCSI_PROTO_RDMA | SCSI_TRN_RDMA_FORMAT_DEFAULT; 6312 bcopy(rdma_id, rdma->initiator_port_id, SCSI_TRN_RDMA_PORT_LEN); 6313 6314 *hdr = (struct scsi_transportid_header *)rdma; 6315 6316bailout: 6317 return (retval); 6318} 6319 6320/* 6321 * Parse an iSCSI name. The format is either just the name: 6322 * 6323 * iqn.2012-06.com.example:target0 6324 * or the name, separator and initiator session ID: 6325 * 6326 * iqn.2012-06.com.example:target0,i,0x123 6327 * 6328 * The separator format is exact. 6329 */ 6330int 6331scsi_parse_transportid_iscsi(char *id_str, struct scsi_transportid_header **hdr, 6332 unsigned int *alloc_len, 6333#ifdef _KERNEL 6334 struct malloc_type *type, int flags, 6335#endif 6336 char *error_str, int error_str_len) 6337{ 6338 size_t id_len, sep_len, id_size, name_len; 6339 int retval; 6340 unsigned int i, sep_pos, sep_found; 6341 const char *sep_template = ",i,0x"; 6342 const char *iqn_prefix = "iqn."; 6343 struct scsi_transportid_iscsi_device *iscsi; 6344 6345 retval = 0; 6346 sep_found = 0; 6347 6348 id_len = strlen(id_str); 6349 sep_len = strlen(sep_template); 6350 6351 /* 6352 * The separator is defined as exactly ',i,0x'. Any other commas, 6353 * or any other form, is an error. So look for a comma, and once 6354 * we find that, the next few characters must match the separator 6355 * exactly. Once we get through the separator, there should be at 6356 * least one character. 6357 */ 6358 for (i = 0, sep_pos = 0; i < id_len; i++) { 6359 if (sep_pos == 0) { 6360 if (id_str[i] == sep_template[sep_pos]) 6361 sep_pos++; 6362 6363 continue; 6364 } 6365 if (sep_pos < sep_len) { 6366 if (id_str[i] == sep_template[sep_pos]) { 6367 sep_pos++; 6368 continue; 6369 } 6370 if (error_str != NULL) { 6371 snprintf(error_str, error_str_len, "%s: " 6372 "invalid separator in iSCSI name " 6373 "\"%s\"", 6374 __func__, id_str); 6375 } 6376 retval = 1; 6377 goto bailout; 6378 } else { 6379 sep_found = 1; 6380 break; 6381 } 6382 } 6383 6384 /* 6385 * Check to see whether we have a separator but no digits after it. 6386 */ 6387 if ((sep_pos != 0) 6388 && (sep_found == 0)) { 6389 if (error_str != NULL) { 6390 snprintf(error_str, error_str_len, "%s: no digits " 6391 "found after separator in iSCSI name \"%s\"", 6392 __func__, id_str); 6393 } 6394 retval = 1; 6395 goto bailout; 6396 } 6397 6398 /* 6399 * The incoming ID string has the "iqn." prefix stripped off. We 6400 * need enough space for the base structure (the structures are the 6401 * same for the two iSCSI forms), the prefix, the ID string and a 6402 * terminating NUL. 6403 */ 6404 id_size = sizeof(*iscsi) + strlen(iqn_prefix) + id_len + 1; 6405 6406#ifdef _KERNEL 6407 iscsi = malloc(id_size, type, flags); 6408#else 6409 iscsi = malloc(id_size); 6410#endif 6411 if (iscsi == NULL) { 6412 if (error_str != NULL) { 6413 snprintf(error_str, error_str_len, "%s: unable to " 6414 "allocate %zu bytes", __func__, id_size); 6415 } 6416 retval = 1; 6417 goto bailout; 6418 } 6419 *alloc_len = id_size; 6420 bzero(iscsi, id_size); 6421 6422 iscsi->format_protocol = SCSI_PROTO_ISCSI; 6423 if (sep_found == 0) 6424 iscsi->format_protocol |= SCSI_TRN_ISCSI_FORMAT_DEVICE; 6425 else 6426 iscsi->format_protocol |= SCSI_TRN_ISCSI_FORMAT_PORT; 6427 name_len = id_size - sizeof(*iscsi); 6428 scsi_ulto2b(name_len, iscsi->additional_length); 6429 snprintf(iscsi->iscsi_name, name_len, "%s%s", iqn_prefix, id_str); 6430 6431 *hdr = (struct scsi_transportid_header *)iscsi; 6432 6433bailout: 6434 return (retval); 6435} 6436 6437/* 6438 * Parse a SCSI over PCIe (SOP) identifier. The Routing ID can either be 6439 * of the form 'bus,device,function' or 'bus,function'. 6440 */ 6441int 6442scsi_parse_transportid_sop(char *id_str, struct scsi_transportid_header **hdr, 6443 unsigned int *alloc_len, 6444#ifdef _KERNEL 6445 struct malloc_type *type, int flags, 6446#endif 6447 char *error_str, int error_str_len) 6448{ 6449 struct scsi_transportid_sop *sop; 6450 unsigned long bus, device, function; 6451 char *tmpstr, *endptr; 6452 int retval, device_spec; 6453 6454 retval = 0; 6455 device_spec = 0; 6456 device = 0; 6457 6458 tmpstr = strsep(&id_str, ","); 6459 if ((tmpstr == NULL) 6460 || (*tmpstr == '\0')) { 6461 if (error_str != NULL) { 6462 snprintf(error_str, error_str_len, "%s: no ID found", 6463 __func__); 6464 } 6465 retval = 1; 6466 goto bailout; 6467 } 6468 bus = strtoul(tmpstr, &endptr, 0); 6469 if (*endptr != '\0') { 6470 if (error_str != NULL) { 6471 snprintf(error_str, error_str_len, "%s: error " 6472 "parsing PCIe bus %s, number required", 6473 __func__, tmpstr); 6474 } 6475 retval = 1; 6476 goto bailout; 6477 } 6478 if ((id_str == NULL) 6479 || (*id_str == '\0')) { 6480 if (error_str != NULL) { 6481 snprintf(error_str, error_str_len, "%s: no PCIe " 6482 "device or function found", __func__); 6483 } 6484 retval = 1; 6485 goto bailout; 6486 } 6487 tmpstr = strsep(&id_str, ","); 6488 function = strtoul(tmpstr, &endptr, 0); 6489 if (*endptr != '\0') { 6490 if (error_str != NULL) { 6491 snprintf(error_str, error_str_len, "%s: error " 6492 "parsing PCIe device/function %s, number " 6493 "required", __func__, tmpstr); 6494 } 6495 retval = 1; 6496 goto bailout; 6497 } 6498 /* 6499 * Check to see whether the user specified a third value. If so, 6500 * the second is the device. 6501 */ 6502 if (id_str != NULL) { 6503 if (*id_str == '\0') { 6504 if (error_str != NULL) { 6505 snprintf(error_str, error_str_len, "%s: " 6506 "no PCIe function found", __func__); 6507 } 6508 retval = 1; 6509 goto bailout; 6510 } 6511 device = function; 6512 device_spec = 1; 6513 function = strtoul(id_str, &endptr, 0); 6514 if (*endptr != '\0') { 6515 if (error_str != NULL) { 6516 snprintf(error_str, error_str_len, "%s: " 6517 "error parsing PCIe function %s, " 6518 "number required", __func__, id_str); 6519 } 6520 retval = 1; 6521 goto bailout; 6522 } 6523 } 6524 if (bus > SCSI_TRN_SOP_BUS_MAX) { 6525 if (error_str != NULL) { 6526 snprintf(error_str, error_str_len, "%s: bus value " 6527 "%lu greater than maximum %u", __func__, 6528 bus, SCSI_TRN_SOP_BUS_MAX); 6529 } 6530 retval = 1; 6531 goto bailout; 6532 } 6533 6534 if ((device_spec != 0) 6535 && (device > SCSI_TRN_SOP_DEV_MASK)) { 6536 if (error_str != NULL) { 6537 snprintf(error_str, error_str_len, "%s: device value " 6538 "%lu greater than maximum %u", __func__, 6539 device, SCSI_TRN_SOP_DEV_MAX); 6540 } 6541 retval = 1; 6542 goto bailout; 6543 } 6544 6545 if (((device_spec != 0) 6546 && (function > SCSI_TRN_SOP_FUNC_NORM_MAX)) 6547 || ((device_spec == 0) 6548 && (function > SCSI_TRN_SOP_FUNC_ALT_MAX))) { 6549 if (error_str != NULL) { 6550 snprintf(error_str, error_str_len, "%s: function value " 6551 "%lu greater than maximum %u", __func__, 6552 function, (device_spec == 0) ? 6553 SCSI_TRN_SOP_FUNC_ALT_MAX : 6554 SCSI_TRN_SOP_FUNC_NORM_MAX); 6555 } 6556 retval = 1; 6557 goto bailout; 6558 } 6559 6560#ifdef _KERNEL 6561 sop = malloc(sizeof(*sop), type, flags); 6562#else 6563 sop = malloc(sizeof(*sop)); 6564#endif 6565 if (sop == NULL) { 6566 if (error_str != NULL) { 6567 snprintf(error_str, error_str_len, "%s: unable to " 6568 "allocate %zu bytes", __func__, sizeof(*sop)); 6569 } 6570 retval = 1; 6571 goto bailout; 6572 } 6573 *alloc_len = sizeof(*sop); 6574 bzero(sop, sizeof(*sop)); 6575 sop->format_protocol = SCSI_PROTO_SOP | SCSI_TRN_SOP_FORMAT_DEFAULT; 6576 if (device_spec != 0) { 6577 struct scsi_sop_routing_id_norm rid; 6578 6579 rid.bus = bus; 6580 rid.devfunc = (device << SCSI_TRN_SOP_DEV_SHIFT) | function; 6581 bcopy(&rid, sop->routing_id, MIN(sizeof(rid), 6582 sizeof(sop->routing_id))); 6583 } else { 6584 struct scsi_sop_routing_id_alt rid; 6585 6586 rid.bus = bus; 6587 rid.function = function; 6588 bcopy(&rid, sop->routing_id, MIN(sizeof(rid), 6589 sizeof(sop->routing_id))); 6590 } 6591 6592 *hdr = (struct scsi_transportid_header *)sop; 6593bailout: 6594 return (retval); 6595} 6596 6597/* 6598 * transportid_str: NUL-terminated string with format: protcol,id 6599 * The ID is protocol specific. 6600 * hdr: Storage will be allocated for the transport ID. 6601 * alloc_len: The amount of memory allocated is returned here. 6602 * type: Malloc bucket (kernel only). 6603 * flags: Malloc flags (kernel only). 6604 * error_str: If non-NULL, it will contain error information (without 6605 * a terminating newline) if an error is returned. 6606 * error_str_len: Allocated length of the error string. 6607 * 6608 * Returns 0 for success, non-zero for failure. 6609 */ 6610int 6611scsi_parse_transportid(char *transportid_str, 6612 struct scsi_transportid_header **hdr, 6613 unsigned int *alloc_len, 6614#ifdef _KERNEL 6615 struct malloc_type *type, int flags, 6616#endif 6617 char *error_str, int error_str_len) 6618{ 6619 char *tmpstr; 6620 scsi_nv_status status; 6621 u_int num_proto_entries; 6622 int retval, table_entry; 6623 6624 retval = 0; 6625 table_entry = 0; 6626 6627 /* 6628 * We do allow a period as well as a comma to separate the protocol 6629 * from the ID string. This is to accommodate iSCSI names, which 6630 * start with "iqn.". 6631 */ 6632 tmpstr = strsep(&transportid_str, ",."); 6633 if (tmpstr == NULL) { 6634 if (error_str != NULL) { 6635 snprintf(error_str, error_str_len, 6636 "%s: transportid_str is NULL", __func__); 6637 } 6638 retval = 1; 6639 goto bailout; 6640 } 6641 6642 num_proto_entries = nitems(scsi_proto_map); 6643 status = scsi_get_nv(scsi_proto_map, num_proto_entries, tmpstr, 6644 &table_entry, SCSI_NV_FLAG_IG_CASE); 6645 if (status != SCSI_NV_FOUND) { 6646 if (error_str != NULL) { 6647 snprintf(error_str, error_str_len, "%s: %s protocol " 6648 "name %s", __func__, 6649 (status == SCSI_NV_AMBIGUOUS) ? "ambiguous" : 6650 "invalid", tmpstr); 6651 } 6652 retval = 1; 6653 goto bailout; 6654 } 6655 switch (scsi_proto_map[table_entry].value) { 6656 case SCSI_PROTO_FC: 6657 case SCSI_PROTO_1394: 6658 case SCSI_PROTO_SAS: 6659 retval = scsi_parse_transportid_64bit( 6660 scsi_proto_map[table_entry].value, transportid_str, hdr, 6661 alloc_len, 6662#ifdef _KERNEL 6663 type, flags, 6664#endif 6665 error_str, error_str_len); 6666 break; 6667 case SCSI_PROTO_SPI: 6668 retval = scsi_parse_transportid_spi(transportid_str, hdr, 6669 alloc_len, 6670#ifdef _KERNEL 6671 type, flags, 6672#endif 6673 error_str, error_str_len); 6674 break; 6675 case SCSI_PROTO_RDMA: 6676 retval = scsi_parse_transportid_rdma(transportid_str, hdr, 6677 alloc_len, 6678#ifdef _KERNEL 6679 type, flags, 6680#endif 6681 error_str, error_str_len); 6682 break; 6683 case SCSI_PROTO_ISCSI: 6684 retval = scsi_parse_transportid_iscsi(transportid_str, hdr, 6685 alloc_len, 6686#ifdef _KERNEL 6687 type, flags, 6688#endif 6689 error_str, error_str_len); 6690 break; 6691 case SCSI_PROTO_SOP: 6692 retval = scsi_parse_transportid_sop(transportid_str, hdr, 6693 alloc_len, 6694#ifdef _KERNEL 6695 type, flags, 6696#endif 6697 error_str, error_str_len); 6698 break; 6699 case SCSI_PROTO_SSA: 6700 case SCSI_PROTO_ADITP: 6701 case SCSI_PROTO_ATA: 6702 case SCSI_PROTO_UAS: 6703 case SCSI_PROTO_NONE: 6704 default: 6705 /* 6706 * There is no format defined for a Transport ID for these 6707 * protocols. So even if the user gives us something, we 6708 * have no way to turn it into a standard SCSI Transport ID. 6709 */ 6710 retval = 1; 6711 if (error_str != NULL) { 6712 snprintf(error_str, error_str_len, "%s: no Transport " 6713 "ID format exists for protocol %s", 6714 __func__, tmpstr); 6715 } 6716 goto bailout; 6717 break; /* NOTREACHED */ 6718 } 6719bailout: 6720 return (retval); 6721} 6722 6723struct scsi_attrib_table_entry scsi_mam_attr_table[] = { 6724 { SMA_ATTR_REM_CAP_PARTITION, SCSI_ATTR_FLAG_NONE, 6725 "Remaining Capacity in Partition", 6726 /*suffix*/ "MB", /*to_str*/ scsi_attrib_int_sbuf,/*parse_str*/ NULL }, 6727 { SMA_ATTR_MAX_CAP_PARTITION, SCSI_ATTR_FLAG_NONE, 6728 "Maximum Capacity in Partition", 6729 /*suffix*/"MB", /*to_str*/ scsi_attrib_int_sbuf, /*parse_str*/ NULL }, 6730 { SMA_ATTR_TAPEALERT_FLAGS, SCSI_ATTR_FLAG_HEX, 6731 "TapeAlert Flags", 6732 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, /*parse_str*/ NULL }, 6733 { SMA_ATTR_LOAD_COUNT, SCSI_ATTR_FLAG_NONE, 6734 "Load Count", 6735 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, /*parse_str*/ NULL }, 6736 { SMA_ATTR_MAM_SPACE_REMAINING, SCSI_ATTR_FLAG_NONE, 6737 "MAM Space Remaining", 6738 /*suffix*/"bytes", /*to_str*/ scsi_attrib_int_sbuf, 6739 /*parse_str*/ NULL }, 6740 { SMA_ATTR_DEV_ASSIGNING_ORG, SCSI_ATTR_FLAG_NONE, 6741 "Assigning Organization", 6742 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6743 /*parse_str*/ NULL }, 6744 { SMA_ATTR_FORMAT_DENSITY_CODE, SCSI_ATTR_FLAG_HEX, 6745 "Format Density Code", 6746 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, /*parse_str*/ NULL }, 6747 { SMA_ATTR_INITIALIZATION_COUNT, SCSI_ATTR_FLAG_NONE, 6748 "Initialization Count", 6749 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, /*parse_str*/ NULL }, 6750 { SMA_ATTR_VOLUME_ID, SCSI_ATTR_FLAG_NONE, 6751 "Volume Identifier", 6752 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6753 /*parse_str*/ NULL }, 6754 { SMA_ATTR_VOLUME_CHANGE_REF, SCSI_ATTR_FLAG_HEX, 6755 "Volume Change Reference", 6756 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6757 /*parse_str*/ NULL }, 6758 { SMA_ATTR_DEV_SERIAL_LAST_LOAD, SCSI_ATTR_FLAG_NONE, 6759 "Device Vendor/Serial at Last Load", 6760 /*suffix*/NULL, /*to_str*/ scsi_attrib_vendser_sbuf, 6761 /*parse_str*/ NULL }, 6762 { SMA_ATTR_DEV_SERIAL_LAST_LOAD_1, SCSI_ATTR_FLAG_NONE, 6763 "Device Vendor/Serial at Last Load - 1", 6764 /*suffix*/NULL, /*to_str*/ scsi_attrib_vendser_sbuf, 6765 /*parse_str*/ NULL }, 6766 { SMA_ATTR_DEV_SERIAL_LAST_LOAD_2, SCSI_ATTR_FLAG_NONE, 6767 "Device Vendor/Serial at Last Load - 2", 6768 /*suffix*/NULL, /*to_str*/ scsi_attrib_vendser_sbuf, 6769 /*parse_str*/ NULL }, 6770 { SMA_ATTR_DEV_SERIAL_LAST_LOAD_3, SCSI_ATTR_FLAG_NONE, 6771 "Device Vendor/Serial at Last Load - 3", 6772 /*suffix*/NULL, /*to_str*/ scsi_attrib_vendser_sbuf, 6773 /*parse_str*/ NULL }, 6774 { SMA_ATTR_TOTAL_MB_WRITTEN_LT, SCSI_ATTR_FLAG_NONE, 6775 "Total MB Written in Medium Life", 6776 /*suffix*/ "MB", /*to_str*/ scsi_attrib_int_sbuf, 6777 /*parse_str*/ NULL }, 6778 { SMA_ATTR_TOTAL_MB_READ_LT, SCSI_ATTR_FLAG_NONE, 6779 "Total MB Read in Medium Life", 6780 /*suffix*/ "MB", /*to_str*/ scsi_attrib_int_sbuf, 6781 /*parse_str*/ NULL }, 6782 { SMA_ATTR_TOTAL_MB_WRITTEN_CUR, SCSI_ATTR_FLAG_NONE, 6783 "Total MB Written in Current/Last Load", 6784 /*suffix*/ "MB", /*to_str*/ scsi_attrib_int_sbuf, 6785 /*parse_str*/ NULL }, 6786 { SMA_ATTR_TOTAL_MB_READ_CUR, SCSI_ATTR_FLAG_NONE, 6787 "Total MB Read in Current/Last Load", 6788 /*suffix*/ "MB", /*to_str*/ scsi_attrib_int_sbuf, 6789 /*parse_str*/ NULL }, 6790 { SMA_ATTR_FIRST_ENC_BLOCK, SCSI_ATTR_FLAG_NONE, 6791 "Logical Position of First Encrypted Block", 6792 /*suffix*/ NULL, /*to_str*/ scsi_attrib_int_sbuf, 6793 /*parse_str*/ NULL }, 6794 { SMA_ATTR_NEXT_UNENC_BLOCK, SCSI_ATTR_FLAG_NONE, 6795 "Logical Position of First Unencrypted Block after First " 6796 "Encrypted Block", 6797 /*suffix*/ NULL, /*to_str*/ scsi_attrib_int_sbuf, 6798 /*parse_str*/ NULL }, 6799 { SMA_ATTR_MEDIUM_USAGE_HIST, SCSI_ATTR_FLAG_NONE, 6800 "Medium Usage History", 6801 /*suffix*/ NULL, /*to_str*/ NULL, 6802 /*parse_str*/ NULL }, 6803 { SMA_ATTR_PART_USAGE_HIST, SCSI_ATTR_FLAG_NONE, 6804 "Partition Usage History", 6805 /*suffix*/ NULL, /*to_str*/ NULL, 6806 /*parse_str*/ NULL }, 6807 { SMA_ATTR_MED_MANUF, SCSI_ATTR_FLAG_NONE, 6808 "Medium Manufacturer", 6809 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6810 /*parse_str*/ NULL }, 6811 { SMA_ATTR_MED_SERIAL, SCSI_ATTR_FLAG_NONE, 6812 "Medium Serial Number", 6813 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6814 /*parse_str*/ NULL }, 6815 { SMA_ATTR_MED_LENGTH, SCSI_ATTR_FLAG_NONE, 6816 "Medium Length", 6817 /*suffix*/"m", /*to_str*/ scsi_attrib_int_sbuf, 6818 /*parse_str*/ NULL }, 6819 { SMA_ATTR_MED_WIDTH, SCSI_ATTR_FLAG_FP | SCSI_ATTR_FLAG_DIV_10 | 6820 SCSI_ATTR_FLAG_FP_1DIGIT, 6821 "Medium Width", 6822 /*suffix*/"mm", /*to_str*/ scsi_attrib_int_sbuf, 6823 /*parse_str*/ NULL }, 6824 { SMA_ATTR_MED_ASSIGNING_ORG, SCSI_ATTR_FLAG_NONE, 6825 "Assigning Organization", 6826 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6827 /*parse_str*/ NULL }, 6828 { SMA_ATTR_MED_DENSITY_CODE, SCSI_ATTR_FLAG_HEX, 6829 "Medium Density Code", 6830 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6831 /*parse_str*/ NULL }, 6832 { SMA_ATTR_MED_MANUF_DATE, SCSI_ATTR_FLAG_NONE, 6833 "Medium Manufacture Date", 6834 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6835 /*parse_str*/ NULL }, 6836 { SMA_ATTR_MAM_CAPACITY, SCSI_ATTR_FLAG_NONE, 6837 "MAM Capacity", 6838 /*suffix*/"bytes", /*to_str*/ scsi_attrib_int_sbuf, 6839 /*parse_str*/ NULL }, 6840 { SMA_ATTR_MED_TYPE, SCSI_ATTR_FLAG_HEX, 6841 "Medium Type", 6842 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6843 /*parse_str*/ NULL }, 6844 { SMA_ATTR_MED_TYPE_INFO, SCSI_ATTR_FLAG_HEX, 6845 "Medium Type Information", 6846 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6847 /*parse_str*/ NULL }, 6848 { SMA_ATTR_MED_SERIAL_NUM, SCSI_ATTR_FLAG_NONE, 6849 "Medium Serial Number", 6850 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6851 /*parse_str*/ NULL }, 6852 { SMA_ATTR_APP_VENDOR, SCSI_ATTR_FLAG_NONE, 6853 "Application Vendor", 6854 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6855 /*parse_str*/ NULL }, 6856 { SMA_ATTR_APP_NAME, SCSI_ATTR_FLAG_NONE, 6857 "Application Name", 6858 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6859 /*parse_str*/ NULL }, 6860 { SMA_ATTR_APP_VERSION, SCSI_ATTR_FLAG_NONE, 6861 "Application Version", 6862 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6863 /*parse_str*/ NULL }, 6864 { SMA_ATTR_USER_MED_TEXT_LABEL, SCSI_ATTR_FLAG_NONE, 6865 "User Medium Text Label", 6866 /*suffix*/NULL, /*to_str*/ scsi_attrib_text_sbuf, 6867 /*parse_str*/ NULL }, 6868 { SMA_ATTR_LAST_WRITTEN_TIME, SCSI_ATTR_FLAG_NONE, 6869 "Date and Time Last Written", 6870 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6871 /*parse_str*/ NULL }, 6872 { SMA_ATTR_TEXT_LOCAL_ID, SCSI_ATTR_FLAG_HEX, 6873 "Text Localization Identifier", 6874 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6875 /*parse_str*/ NULL }, 6876 { SMA_ATTR_BARCODE, SCSI_ATTR_FLAG_NONE, 6877 "Barcode", 6878 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6879 /*parse_str*/ NULL }, 6880 { SMA_ATTR_HOST_OWNER_NAME, SCSI_ATTR_FLAG_NONE, 6881 "Owning Host Textual Name", 6882 /*suffix*/NULL, /*to_str*/ scsi_attrib_text_sbuf, 6883 /*parse_str*/ NULL }, 6884 { SMA_ATTR_MEDIA_POOL, SCSI_ATTR_FLAG_NONE, 6885 "Media Pool", 6886 /*suffix*/NULL, /*to_str*/ scsi_attrib_text_sbuf, 6887 /*parse_str*/ NULL }, 6888 { SMA_ATTR_PART_USER_LABEL, SCSI_ATTR_FLAG_NONE, 6889 "Partition User Text Label", 6890 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6891 /*parse_str*/ NULL }, 6892 { SMA_ATTR_LOAD_UNLOAD_AT_PART, SCSI_ATTR_FLAG_NONE, 6893 "Load/Unload at Partition", 6894 /*suffix*/NULL, /*to_str*/ scsi_attrib_int_sbuf, 6895 /*parse_str*/ NULL }, 6896 { SMA_ATTR_APP_FORMAT_VERSION, SCSI_ATTR_FLAG_NONE, 6897 "Application Format Version", 6898 /*suffix*/NULL, /*to_str*/ scsi_attrib_ascii_sbuf, 6899 /*parse_str*/ NULL }, 6900 { SMA_ATTR_VOL_COHERENCY_INFO, SCSI_ATTR_FLAG_NONE, 6901 "Volume Coherency Information", 6902 /*suffix*/NULL, /*to_str*/ scsi_attrib_volcoh_sbuf, 6903 /*parse_str*/ NULL }, 6904 { 0x0ff1, SCSI_ATTR_FLAG_NONE, 6905 "Spectra MLM Creation", 6906 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6907 /*parse_str*/ NULL }, 6908 { 0x0ff2, SCSI_ATTR_FLAG_NONE, 6909 "Spectra MLM C3", 6910 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6911 /*parse_str*/ NULL }, 6912 { 0x0ff3, SCSI_ATTR_FLAG_NONE, 6913 "Spectra MLM RW", 6914 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6915 /*parse_str*/ NULL }, 6916 { 0x0ff4, SCSI_ATTR_FLAG_NONE, 6917 "Spectra MLM SDC List", 6918 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6919 /*parse_str*/ NULL }, 6920 { 0x0ff7, SCSI_ATTR_FLAG_NONE, 6921 "Spectra MLM Post Scan", 6922 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6923 /*parse_str*/ NULL }, 6924 { 0x0ffe, SCSI_ATTR_FLAG_NONE, 6925 "Spectra MLM Checksum", 6926 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6927 /*parse_str*/ NULL }, 6928 { 0x17f1, SCSI_ATTR_FLAG_NONE, 6929 "Spectra MLM Creation", 6930 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6931 /*parse_str*/ NULL }, 6932 { 0x17f2, SCSI_ATTR_FLAG_NONE, 6933 "Spectra MLM C3", 6934 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6935 /*parse_str*/ NULL }, 6936 { 0x17f3, SCSI_ATTR_FLAG_NONE, 6937 "Spectra MLM RW", 6938 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6939 /*parse_str*/ NULL }, 6940 { 0x17f4, SCSI_ATTR_FLAG_NONE, 6941 "Spectra MLM SDC List", 6942 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6943 /*parse_str*/ NULL }, 6944 { 0x17f7, SCSI_ATTR_FLAG_NONE, 6945 "Spectra MLM Post Scan", 6946 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6947 /*parse_str*/ NULL }, 6948 { 0x17ff, SCSI_ATTR_FLAG_NONE, 6949 "Spectra MLM Checksum", 6950 /*suffix*/NULL, /*to_str*/ scsi_attrib_hexdump_sbuf, 6951 /*parse_str*/ NULL }, 6952}; 6953 6954/* 6955 * Print out Volume Coherency Information (Attribute 0x080c). 6956 * This field has two variable length members, including one at the 6957 * beginning, so it isn't practical to have a fixed structure definition. 6958 * This is current as of SSC4r03 (see section 4.2.21.3), dated March 25, 6959 * 2013. 6960 */ 6961int 6962scsi_attrib_volcoh_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 6963 uint32_t valid_len, uint32_t flags, 6964 uint32_t output_flags, char *error_str, 6965 int error_str_len) 6966{ 6967 size_t avail_len; 6968 uint32_t field_size; 6969 uint64_t tmp_val; 6970 uint8_t *cur_ptr; 6971 int retval; 6972 int vcr_len, as_len; 6973 6974 retval = 0; 6975 tmp_val = 0; 6976 6977 field_size = scsi_2btoul(hdr->length); 6978 avail_len = valid_len - sizeof(*hdr); 6979 if (field_size > avail_len) { 6980 if (error_str != NULL) { 6981 snprintf(error_str, error_str_len, "Available " 6982 "length of attribute ID 0x%.4x %zu < field " 6983 "length %u", scsi_2btoul(hdr->id), avail_len, 6984 field_size); 6985 } 6986 retval = 1; 6987 goto bailout; 6988 } else if (field_size == 0) { 6989 /* 6990 * It isn't clear from the spec whether a field length of 6991 * 0 is invalid here. It probably is, but be lenient here 6992 * to avoid inconveniencing the user. 6993 */ 6994 goto bailout; 6995 } 6996 cur_ptr = hdr->attribute; 6997 vcr_len = *cur_ptr; 6998 cur_ptr++; 6999 7000 sbuf_printf(sb, "\n\tVolume Change Reference Value:"); 7001 7002 switch (vcr_len) { 7003 case 0: 7004 if (error_str != NULL) { 7005 snprintf(error_str, error_str_len, "Volume Change " 7006 "Reference value has length of 0"); 7007 } 7008 retval = 1; 7009 goto bailout; 7010 break; /*NOTREACHED*/ 7011 case 1: 7012 tmp_val = *cur_ptr; 7013 break; 7014 case 2: 7015 tmp_val = scsi_2btoul(cur_ptr); 7016 break; 7017 case 3: 7018 tmp_val = scsi_3btoul(cur_ptr); 7019 break; 7020 case 4: 7021 tmp_val = scsi_4btoul(cur_ptr); 7022 break; 7023 case 8: 7024 tmp_val = scsi_8btou64(cur_ptr); 7025 break; 7026 default: 7027 sbuf_printf(sb, "\n"); 7028 sbuf_hexdump(sb, cur_ptr, vcr_len, NULL, 0); 7029 break; 7030 } 7031 if (vcr_len <= 8) 7032 sbuf_printf(sb, " 0x%jx\n", (uintmax_t)tmp_val); 7033 7034 cur_ptr += vcr_len; 7035 tmp_val = scsi_8btou64(cur_ptr); 7036 sbuf_printf(sb, "\tVolume Coherency Count: %ju\n", (uintmax_t)tmp_val); 7037 7038 cur_ptr += sizeof(tmp_val); 7039 tmp_val = scsi_8btou64(cur_ptr); 7040 sbuf_printf(sb, "\tVolume Coherency Set Identifier: 0x%jx\n", 7041 (uintmax_t)tmp_val); 7042 7043 /* 7044 * Figure out how long the Application Client Specific Information 7045 * is and produce a hexdump. 7046 */ 7047 cur_ptr += sizeof(tmp_val); 7048 as_len = scsi_2btoul(cur_ptr); 7049 cur_ptr += sizeof(uint16_t); 7050 sbuf_printf(sb, "\tApplication Client Specific Information: "); 7051 if (((as_len == SCSI_LTFS_VER0_LEN) 7052 || (as_len == SCSI_LTFS_VER1_LEN)) 7053 && (strncmp(cur_ptr, SCSI_LTFS_STR_NAME, SCSI_LTFS_STR_LEN) == 0)) { 7054 sbuf_printf(sb, "LTFS\n"); 7055 cur_ptr += SCSI_LTFS_STR_LEN + 1; 7056 if (cur_ptr[SCSI_LTFS_UUID_LEN] != '\0') 7057 cur_ptr[SCSI_LTFS_UUID_LEN] = '\0'; 7058 sbuf_printf(sb, "\tLTFS UUID: %s\n", cur_ptr); 7059 cur_ptr += SCSI_LTFS_UUID_LEN + 1; 7060 /* XXX KDM check the length */ 7061 sbuf_printf(sb, "\tLTFS Version: %d\n", *cur_ptr); 7062 } else { 7063 sbuf_printf(sb, "Unknown\n"); 7064 sbuf_hexdump(sb, cur_ptr, as_len, NULL, 0); 7065 } 7066 7067bailout: 7068 return (retval); 7069} 7070 7071int 7072scsi_attrib_vendser_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 7073 uint32_t valid_len, uint32_t flags, 7074 uint32_t output_flags, char *error_str, 7075 int error_str_len) 7076{ 7077 size_t avail_len; 7078 uint32_t field_size; 7079 struct scsi_attrib_vendser *vendser; 7080 cam_strvis_flags strvis_flags; 7081 int retval = 0; 7082 7083 field_size = scsi_2btoul(hdr->length); 7084 avail_len = valid_len - sizeof(*hdr); 7085 if (field_size > avail_len) { 7086 if (error_str != NULL) { 7087 snprintf(error_str, error_str_len, "Available " 7088 "length of attribute ID 0x%.4x %zu < field " 7089 "length %u", scsi_2btoul(hdr->id), avail_len, 7090 field_size); 7091 } 7092 retval = 1; 7093 goto bailout; 7094 } else if (field_size == 0) { 7095 /* 7096 * A field size of 0 doesn't make sense here. The device 7097 * can at least give you the vendor ID, even if it can't 7098 * give you the serial number. 7099 */ 7100 if (error_str != NULL) { 7101 snprintf(error_str, error_str_len, "The length of " 7102 "attribute ID 0x%.4x is 0", 7103 scsi_2btoul(hdr->id)); 7104 } 7105 retval = 1; 7106 goto bailout; 7107 } 7108 vendser = (struct scsi_attrib_vendser *)hdr->attribute; 7109 7110 switch (output_flags & SCSI_ATTR_OUTPUT_NONASCII_MASK) { 7111 case SCSI_ATTR_OUTPUT_NONASCII_TRIM: 7112 strvis_flags = CAM_STRVIS_FLAG_NONASCII_TRIM; 7113 break; 7114 case SCSI_ATTR_OUTPUT_NONASCII_RAW: 7115 strvis_flags = CAM_STRVIS_FLAG_NONASCII_RAW; 7116 break; 7117 case SCSI_ATTR_OUTPUT_NONASCII_ESC: 7118 default: 7119 strvis_flags = CAM_STRVIS_FLAG_NONASCII_ESC; 7120 break;; 7121 } 7122 cam_strvis_sbuf(sb, vendser->vendor, sizeof(vendser->vendor), 7123 strvis_flags); 7124 sbuf_putc(sb, ' '); 7125 cam_strvis_sbuf(sb, vendser->serial_num, sizeof(vendser->serial_num), 7126 strvis_flags); 7127bailout: 7128 return (retval); 7129} 7130 7131int 7132scsi_attrib_hexdump_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 7133 uint32_t valid_len, uint32_t flags, 7134 uint32_t output_flags, char *error_str, 7135 int error_str_len) 7136{ 7137 uint32_t field_size; 7138 ssize_t avail_len; 7139 uint32_t print_len; 7140 uint8_t *num_ptr; 7141 int retval = 0; 7142 7143 field_size = scsi_2btoul(hdr->length); 7144 avail_len = valid_len - sizeof(*hdr); 7145 print_len = MIN(avail_len, field_size); 7146 num_ptr = hdr->attribute; 7147 7148 if (print_len > 0) { 7149 sbuf_printf(sb, "\n"); 7150 sbuf_hexdump(sb, num_ptr, print_len, NULL, 0); 7151 } 7152 7153 return (retval); 7154} 7155 7156int 7157scsi_attrib_int_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 7158 uint32_t valid_len, uint32_t flags, 7159 uint32_t output_flags, char *error_str, 7160 int error_str_len) 7161{ 7162 uint64_t print_number; 7163 size_t avail_len; 7164 uint32_t number_size; 7165 int retval = 0; 7166 7167 number_size = scsi_2btoul(hdr->length); 7168 7169 avail_len = valid_len - sizeof(*hdr); 7170 if (avail_len < number_size) { 7171 if (error_str != NULL) { 7172 snprintf(error_str, error_str_len, "Available " 7173 "length of attribute ID 0x%.4x %zu < field " 7174 "length %u", scsi_2btoul(hdr->id), avail_len, 7175 number_size); 7176 } 7177 retval = 1; 7178 goto bailout; 7179 } 7180 7181 switch (number_size) { 7182 case 0: 7183 /* 7184 * We don't treat this as an error, since there may be 7185 * scenarios where a device reports a field but then gives 7186 * a length of 0. See the note in scsi_attrib_ascii_sbuf(). 7187 */ 7188 goto bailout; 7189 break; /*NOTREACHED*/ 7190 case 1: 7191 print_number = hdr->attribute[0]; 7192 break; 7193 case 2: 7194 print_number = scsi_2btoul(hdr->attribute); 7195 break; 7196 case 3: 7197 print_number = scsi_3btoul(hdr->attribute); 7198 break; 7199 case 4: 7200 print_number = scsi_4btoul(hdr->attribute); 7201 break; 7202 case 8: 7203 print_number = scsi_8btou64(hdr->attribute); 7204 break; 7205 default: 7206 /* 7207 * If we wind up here, the number is too big to print 7208 * normally, so just do a hexdump. 7209 */ 7210 retval = scsi_attrib_hexdump_sbuf(sb, hdr, valid_len, 7211 flags, output_flags, 7212 error_str, error_str_len); 7213 goto bailout; 7214 break; 7215 } 7216 7217 if (flags & SCSI_ATTR_FLAG_FP) { 7218#ifndef _KERNEL 7219 long double num_float; 7220 7221 num_float = (long double)print_number; 7222 7223 if (flags & SCSI_ATTR_FLAG_DIV_10) 7224 num_float /= 10; 7225 7226 sbuf_printf(sb, "%.*Lf", (flags & SCSI_ATTR_FLAG_FP_1DIGIT) ? 7227 1 : 0, num_float); 7228#else /* _KERNEL */ 7229 sbuf_printf(sb, "%ju", (flags & SCSI_ATTR_FLAG_DIV_10) ? 7230 (print_number / 10) : print_number); 7231#endif /* _KERNEL */ 7232 } else if (flags & SCSI_ATTR_FLAG_HEX) { 7233 sbuf_printf(sb, "0x%jx", (uintmax_t)print_number); 7234 } else 7235 sbuf_printf(sb, "%ju", (uintmax_t)print_number); 7236 7237bailout: 7238 return (retval); 7239} 7240 7241int 7242scsi_attrib_ascii_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 7243 uint32_t valid_len, uint32_t flags, 7244 uint32_t output_flags, char *error_str, 7245 int error_str_len) 7246{ 7247 size_t avail_len; 7248 uint32_t field_size, print_size; 7249 int retval = 0; 7250 7251 avail_len = valid_len - sizeof(*hdr); 7252 field_size = scsi_2btoul(hdr->length); 7253 print_size = MIN(avail_len, field_size); 7254 7255 if (print_size > 0) { 7256 cam_strvis_flags strvis_flags; 7257 7258 switch (output_flags & SCSI_ATTR_OUTPUT_NONASCII_MASK) { 7259 case SCSI_ATTR_OUTPUT_NONASCII_TRIM: 7260 strvis_flags = CAM_STRVIS_FLAG_NONASCII_TRIM; 7261 break; 7262 case SCSI_ATTR_OUTPUT_NONASCII_RAW: 7263 strvis_flags = CAM_STRVIS_FLAG_NONASCII_RAW; 7264 break; 7265 case SCSI_ATTR_OUTPUT_NONASCII_ESC: 7266 default: 7267 strvis_flags = CAM_STRVIS_FLAG_NONASCII_ESC; 7268 break; 7269 } 7270 cam_strvis_sbuf(sb, hdr->attribute, print_size, strvis_flags); 7271 } else if (avail_len < field_size) { 7272 /* 7273 * We only report an error if the user didn't allocate 7274 * enough space to hold the full value of this field. If 7275 * the field length is 0, that is allowed by the spec. 7276 * e.g. in SPC-4r37, section 7.4.2.2.5, VOLUME IDENTIFIER 7277 * "This attribute indicates the current volume identifier 7278 * (see SMC-3) of the medium. If the device server supports 7279 * this attribute but does not have access to the volume 7280 * identifier, the device server shall report this attribute 7281 * with an attribute length value of zero." 7282 */ 7283 if (error_str != NULL) { 7284 snprintf(error_str, error_str_len, "Available " 7285 "length of attribute ID 0x%.4x %zu < field " 7286 "length %u", scsi_2btoul(hdr->id), avail_len, 7287 field_size); 7288 } 7289 retval = 1; 7290 } 7291 7292 return (retval); 7293} 7294 7295int 7296scsi_attrib_text_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 7297 uint32_t valid_len, uint32_t flags, 7298 uint32_t output_flags, char *error_str, 7299 int error_str_len) 7300{ 7301 size_t avail_len; 7302 uint32_t field_size, print_size; 7303 int retval = 0; 7304 int esc_text = 1; 7305 7306 avail_len = valid_len - sizeof(*hdr); 7307 field_size = scsi_2btoul(hdr->length); 7308 print_size = MIN(avail_len, field_size); 7309 7310 if ((output_flags & SCSI_ATTR_OUTPUT_TEXT_MASK) == 7311 SCSI_ATTR_OUTPUT_TEXT_RAW) 7312 esc_text = 0; 7313 7314 if (print_size > 0) { 7315 uint32_t i; 7316 7317 for (i = 0; i < print_size; i++) { 7318 if (hdr->attribute[i] == '\0') 7319 continue; 7320 else if (((unsigned char)hdr->attribute[i] < 0x80) 7321 || (esc_text == 0)) 7322 sbuf_putc(sb, hdr->attribute[i]); 7323 else 7324 sbuf_printf(sb, "%%%02x", 7325 (unsigned char)hdr->attribute[i]); 7326 } 7327 } else if (avail_len < field_size) { 7328 /* 7329 * We only report an error if the user didn't allocate 7330 * enough space to hold the full value of this field. 7331 */ 7332 if (error_str != NULL) { 7333 snprintf(error_str, error_str_len, "Available " 7334 "length of attribute ID 0x%.4x %zu < field " 7335 "length %u", scsi_2btoul(hdr->id), avail_len, 7336 field_size); 7337 } 7338 retval = 1; 7339 } 7340 7341 return (retval); 7342} 7343 7344struct scsi_attrib_table_entry * 7345scsi_find_attrib_entry(struct scsi_attrib_table_entry *table, 7346 size_t num_table_entries, uint32_t id) 7347{ 7348 uint32_t i; 7349 7350 for (i = 0; i < num_table_entries; i++) { 7351 if (table[i].id == id) 7352 return (&table[i]); 7353 } 7354 7355 return (NULL); 7356} 7357 7358struct scsi_attrib_table_entry * 7359scsi_get_attrib_entry(uint32_t id) 7360{ 7361 return (scsi_find_attrib_entry(scsi_mam_attr_table, 7362 nitems(scsi_mam_attr_table), id)); 7363} 7364 7365int 7366scsi_attrib_value_sbuf(struct sbuf *sb, uint32_t valid_len, 7367 struct scsi_mam_attribute_header *hdr, uint32_t output_flags, 7368 char *error_str, size_t error_str_len) 7369{ 7370 int retval; 7371 7372 switch (hdr->byte2 & SMA_FORMAT_MASK) { 7373 case SMA_FORMAT_ASCII: 7374 retval = scsi_attrib_ascii_sbuf(sb, hdr, valid_len, 7375 SCSI_ATTR_FLAG_NONE, output_flags, error_str,error_str_len); 7376 break; 7377 case SMA_FORMAT_BINARY: 7378 if (scsi_2btoul(hdr->length) <= 8) 7379 retval = scsi_attrib_int_sbuf(sb, hdr, valid_len, 7380 SCSI_ATTR_FLAG_NONE, output_flags, error_str, 7381 error_str_len); 7382 else 7383 retval = scsi_attrib_hexdump_sbuf(sb, hdr, valid_len, 7384 SCSI_ATTR_FLAG_NONE, output_flags, error_str, 7385 error_str_len); 7386 break; 7387 case SMA_FORMAT_TEXT: 7388 retval = scsi_attrib_text_sbuf(sb, hdr, valid_len, 7389 SCSI_ATTR_FLAG_NONE, output_flags, error_str, 7390 error_str_len); 7391 break; 7392 default: 7393 if (error_str != NULL) { 7394 snprintf(error_str, error_str_len, "Unknown attribute " 7395 "format 0x%x", hdr->byte2 & SMA_FORMAT_MASK); 7396 } 7397 retval = 1; 7398 goto bailout; 7399 break; /*NOTREACHED*/ 7400 } 7401 7402 sbuf_trim(sb); 7403 7404bailout: 7405 7406 return (retval); 7407} 7408 7409void 7410scsi_attrib_prefix_sbuf(struct sbuf *sb, uint32_t output_flags, 7411 struct scsi_mam_attribute_header *hdr, 7412 uint32_t valid_len, const char *desc) 7413{ 7414 int need_space = 0; 7415 uint32_t len; 7416 uint32_t id; 7417 7418 /* 7419 * We can't do anything if we don't have enough valid data for the 7420 * header. 7421 */ 7422 if (valid_len < sizeof(*hdr)) 7423 return; 7424 7425 id = scsi_2btoul(hdr->id); 7426 /* 7427 * Note that we print out the value of the attribute listed in the 7428 * header, regardless of whether we actually got that many bytes 7429 * back from the device through the controller. A truncated result 7430 * could be the result of a failure to ask for enough data; the 7431 * header indicates how many bytes are allocated for this attribute 7432 * in the MAM. 7433 */ 7434 len = scsi_2btoul(hdr->length); 7435 7436 if ((output_flags & SCSI_ATTR_OUTPUT_FIELD_MASK) == 7437 SCSI_ATTR_OUTPUT_FIELD_NONE) 7438 return; 7439 7440 if ((output_flags & SCSI_ATTR_OUTPUT_FIELD_DESC) 7441 && (desc != NULL)) { 7442 sbuf_printf(sb, "%s", desc); 7443 need_space = 1; 7444 } 7445 7446 if (output_flags & SCSI_ATTR_OUTPUT_FIELD_NUM) { 7447 sbuf_printf(sb, "%s(0x%.4x)", (need_space) ? " " : "", id); 7448 need_space = 0; 7449 } 7450 7451 if (output_flags & SCSI_ATTR_OUTPUT_FIELD_SIZE) { 7452 sbuf_printf(sb, "%s[%d]", (need_space) ? " " : "", len); 7453 need_space = 0; 7454 } 7455 if (output_flags & SCSI_ATTR_OUTPUT_FIELD_RW) { 7456 sbuf_printf(sb, "%s(%s)", (need_space) ? " " : "", 7457 (hdr->byte2 & SMA_READ_ONLY) ? "RO" : "RW"); 7458 } 7459 sbuf_printf(sb, ": "); 7460} 7461 7462int 7463scsi_attrib_sbuf(struct sbuf *sb, struct scsi_mam_attribute_header *hdr, 7464 uint32_t valid_len, struct scsi_attrib_table_entry *user_table, 7465 size_t num_user_entries, int prefer_user_table, 7466 uint32_t output_flags, char *error_str, int error_str_len) 7467{ 7468 int retval; 7469 struct scsi_attrib_table_entry *table1 = NULL, *table2 = NULL; 7470 struct scsi_attrib_table_entry *entry = NULL; 7471 size_t table1_size = 0, table2_size = 0; 7472 uint32_t id; 7473 7474 retval = 0; 7475 7476 if (valid_len < sizeof(*hdr)) { 7477 retval = 1; 7478 goto bailout; 7479 } 7480 7481 id = scsi_2btoul(hdr->id); 7482 7483 if (user_table != NULL) { 7484 if (prefer_user_table != 0) { 7485 table1 = user_table; 7486 table1_size = num_user_entries; 7487 table2 = scsi_mam_attr_table; 7488 table2_size = nitems(scsi_mam_attr_table); 7489 } else { 7490 table1 = scsi_mam_attr_table; 7491 table1_size = nitems(scsi_mam_attr_table); 7492 table2 = user_table; 7493 table2_size = num_user_entries; 7494 } 7495 } else { 7496 table1 = scsi_mam_attr_table; 7497 table1_size = nitems(scsi_mam_attr_table); 7498 } 7499 7500 entry = scsi_find_attrib_entry(table1, table1_size, id); 7501 if (entry != NULL) { 7502 scsi_attrib_prefix_sbuf(sb, output_flags, hdr, valid_len, 7503 entry->desc); 7504 if (entry->to_str == NULL) 7505 goto print_default; 7506 retval = entry->to_str(sb, hdr, valid_len, entry->flags, 7507 output_flags, error_str, error_str_len); 7508 goto bailout; 7509 } 7510 if (table2 != NULL) { 7511 entry = scsi_find_attrib_entry(table2, table2_size, id); 7512 if (entry != NULL) { 7513 if (entry->to_str == NULL) 7514 goto print_default; 7515 7516 scsi_attrib_prefix_sbuf(sb, output_flags, hdr, 7517 valid_len, entry->desc); 7518 retval = entry->to_str(sb, hdr, valid_len, entry->flags, 7519 output_flags, error_str, 7520 error_str_len); 7521 goto bailout; 7522 } 7523 } 7524 7525 scsi_attrib_prefix_sbuf(sb, output_flags, hdr, valid_len, NULL); 7526 7527print_default: 7528 retval = scsi_attrib_value_sbuf(sb, valid_len, hdr, output_flags, 7529 error_str, error_str_len); 7530bailout: 7531 if (retval == 0) { 7532 if ((entry != NULL) 7533 && (entry->suffix != NULL)) 7534 sbuf_printf(sb, " %s", entry->suffix); 7535 7536 sbuf_trim(sb); 7537 sbuf_printf(sb, "\n"); 7538 } 7539 7540 return (retval); 7541} 7542 7543void 7544scsi_test_unit_ready(struct ccb_scsiio *csio, u_int32_t retries, 7545 void (*cbfcnp)(struct cam_periph *, union ccb *), 7546 u_int8_t tag_action, u_int8_t sense_len, u_int32_t timeout) 7547{ 7548 struct scsi_test_unit_ready *scsi_cmd; 7549 7550 cam_fill_csio(csio, 7551 retries, 7552 cbfcnp, 7553 CAM_DIR_NONE, 7554 tag_action, 7555 /*data_ptr*/NULL, 7556 /*dxfer_len*/0, 7557 sense_len, 7558 sizeof(*scsi_cmd), 7559 timeout); 7560 7561 scsi_cmd = (struct scsi_test_unit_ready *)&csio->cdb_io.cdb_bytes; 7562 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7563 scsi_cmd->opcode = TEST_UNIT_READY; 7564} 7565 7566void 7567scsi_request_sense(struct ccb_scsiio *csio, u_int32_t retries, 7568 void (*cbfcnp)(struct cam_periph *, union ccb *), 7569 void *data_ptr, u_int8_t dxfer_len, u_int8_t tag_action, 7570 u_int8_t sense_len, u_int32_t timeout) 7571{ 7572 struct scsi_request_sense *scsi_cmd; 7573 7574 cam_fill_csio(csio, 7575 retries, 7576 cbfcnp, 7577 CAM_DIR_IN, 7578 tag_action, 7579 data_ptr, 7580 dxfer_len, 7581 sense_len, 7582 sizeof(*scsi_cmd), 7583 timeout); 7584 7585 scsi_cmd = (struct scsi_request_sense *)&csio->cdb_io.cdb_bytes; 7586 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7587 scsi_cmd->opcode = REQUEST_SENSE; 7588 scsi_cmd->length = dxfer_len; 7589} 7590 7591void 7592scsi_inquiry(struct ccb_scsiio *csio, u_int32_t retries, 7593 void (*cbfcnp)(struct cam_periph *, union ccb *), 7594 u_int8_t tag_action, u_int8_t *inq_buf, u_int32_t inq_len, 7595 int evpd, u_int8_t page_code, u_int8_t sense_len, 7596 u_int32_t timeout) 7597{ 7598 struct scsi_inquiry *scsi_cmd; 7599 7600 cam_fill_csio(csio, 7601 retries, 7602 cbfcnp, 7603 /*flags*/CAM_DIR_IN, 7604 tag_action, 7605 /*data_ptr*/inq_buf, 7606 /*dxfer_len*/inq_len, 7607 sense_len, 7608 sizeof(*scsi_cmd), 7609 timeout); 7610 7611 scsi_cmd = (struct scsi_inquiry *)&csio->cdb_io.cdb_bytes; 7612 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7613 scsi_cmd->opcode = INQUIRY; 7614 if (evpd) { 7615 scsi_cmd->byte2 |= SI_EVPD; 7616 scsi_cmd->page_code = page_code; 7617 } 7618 scsi_ulto2b(inq_len, scsi_cmd->length); 7619} 7620 7621void 7622scsi_mode_sense(struct ccb_scsiio *csio, uint32_t retries, 7623 void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, 7624 int dbd, uint8_t pc, uint8_t page, uint8_t *param_buf, uint32_t param_len, 7625 uint8_t sense_len, uint32_t timeout) 7626{ 7627 7628 scsi_mode_sense_subpage(csio, retries, cbfcnp, tag_action, dbd, 7629 pc, page, 0, param_buf, param_len, 0, sense_len, timeout); 7630} 7631 7632void 7633scsi_mode_sense_len(struct ccb_scsiio *csio, uint32_t retries, 7634 void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, 7635 int dbd, uint8_t pc, uint8_t page, uint8_t *param_buf, uint32_t param_len, 7636 int minimum_cmd_size, uint8_t sense_len, uint32_t timeout) 7637{ 7638 7639 scsi_mode_sense_subpage(csio, retries, cbfcnp, tag_action, dbd, 7640 pc, page, 0, param_buf, param_len, minimum_cmd_size, 7641 sense_len, timeout); 7642} 7643 7644void 7645scsi_mode_sense_subpage(struct ccb_scsiio *csio, uint32_t retries, 7646 void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, 7647 int dbd, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t *param_buf, 7648 uint32_t param_len, int minimum_cmd_size, uint8_t sense_len, 7649 uint32_t timeout) 7650{ 7651 u_int8_t cdb_len; 7652 7653 /* 7654 * Use the smallest possible command to perform the operation. 7655 */ 7656 if ((param_len < 256) 7657 && (minimum_cmd_size < 10)) { 7658 /* 7659 * We can fit in a 6 byte cdb. 7660 */ 7661 struct scsi_mode_sense_6 *scsi_cmd; 7662 7663 scsi_cmd = (struct scsi_mode_sense_6 *)&csio->cdb_io.cdb_bytes; 7664 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7665 scsi_cmd->opcode = MODE_SENSE_6; 7666 if (dbd != 0) 7667 scsi_cmd->byte2 |= SMS_DBD; 7668 scsi_cmd->page = pc | page; 7669 scsi_cmd->subpage = subpage; 7670 scsi_cmd->length = param_len; 7671 cdb_len = sizeof(*scsi_cmd); 7672 } else { 7673 /* 7674 * Need a 10 byte cdb. 7675 */ 7676 struct scsi_mode_sense_10 *scsi_cmd; 7677 7678 scsi_cmd = (struct scsi_mode_sense_10 *)&csio->cdb_io.cdb_bytes; 7679 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7680 scsi_cmd->opcode = MODE_SENSE_10; 7681 if (dbd != 0) 7682 scsi_cmd->byte2 |= SMS_DBD; 7683 scsi_cmd->page = pc | page; 7684 scsi_cmd->subpage = subpage; 7685 scsi_ulto2b(param_len, scsi_cmd->length); 7686 cdb_len = sizeof(*scsi_cmd); 7687 } 7688 cam_fill_csio(csio, 7689 retries, 7690 cbfcnp, 7691 CAM_DIR_IN, 7692 tag_action, 7693 param_buf, 7694 param_len, 7695 sense_len, 7696 cdb_len, 7697 timeout); 7698} 7699 7700void 7701scsi_mode_select(struct ccb_scsiio *csio, u_int32_t retries, 7702 void (*cbfcnp)(struct cam_periph *, union ccb *), 7703 u_int8_t tag_action, int scsi_page_fmt, int save_pages, 7704 u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len, 7705 u_int32_t timeout) 7706{ 7707 scsi_mode_select_len(csio, retries, cbfcnp, tag_action, 7708 scsi_page_fmt, save_pages, param_buf, 7709 param_len, 0, sense_len, timeout); 7710} 7711 7712void 7713scsi_mode_select_len(struct ccb_scsiio *csio, u_int32_t retries, 7714 void (*cbfcnp)(struct cam_periph *, union ccb *), 7715 u_int8_t tag_action, int scsi_page_fmt, int save_pages, 7716 u_int8_t *param_buf, u_int32_t param_len, 7717 int minimum_cmd_size, u_int8_t sense_len, 7718 u_int32_t timeout) 7719{ 7720 u_int8_t cdb_len; 7721 7722 /* 7723 * Use the smallest possible command to perform the operation. 7724 */ 7725 if ((param_len < 256) 7726 && (minimum_cmd_size < 10)) { 7727 /* 7728 * We can fit in a 6 byte cdb. 7729 */ 7730 struct scsi_mode_select_6 *scsi_cmd; 7731 7732 scsi_cmd = (struct scsi_mode_select_6 *)&csio->cdb_io.cdb_bytes; 7733 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7734 scsi_cmd->opcode = MODE_SELECT_6; 7735 if (scsi_page_fmt != 0) 7736 scsi_cmd->byte2 |= SMS_PF; 7737 if (save_pages != 0) 7738 scsi_cmd->byte2 |= SMS_SP; 7739 scsi_cmd->length = param_len; 7740 cdb_len = sizeof(*scsi_cmd); 7741 } else { 7742 /* 7743 * Need a 10 byte cdb. 7744 */ 7745 struct scsi_mode_select_10 *scsi_cmd; 7746 7747 scsi_cmd = 7748 (struct scsi_mode_select_10 *)&csio->cdb_io.cdb_bytes; 7749 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7750 scsi_cmd->opcode = MODE_SELECT_10; 7751 if (scsi_page_fmt != 0) 7752 scsi_cmd->byte2 |= SMS_PF; 7753 if (save_pages != 0) 7754 scsi_cmd->byte2 |= SMS_SP; 7755 scsi_ulto2b(param_len, scsi_cmd->length); 7756 cdb_len = sizeof(*scsi_cmd); 7757 } 7758 cam_fill_csio(csio, 7759 retries, 7760 cbfcnp, 7761 CAM_DIR_OUT, 7762 tag_action, 7763 param_buf, 7764 param_len, 7765 sense_len, 7766 cdb_len, 7767 timeout); 7768} 7769 7770void 7771scsi_log_sense(struct ccb_scsiio *csio, u_int32_t retries, 7772 void (*cbfcnp)(struct cam_periph *, union ccb *), 7773 u_int8_t tag_action, u_int8_t page_code, u_int8_t page, 7774 int save_pages, int ppc, u_int32_t paramptr, 7775 u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len, 7776 u_int32_t timeout) 7777{ 7778 struct scsi_log_sense *scsi_cmd; 7779 u_int8_t cdb_len; 7780 7781 scsi_cmd = (struct scsi_log_sense *)&csio->cdb_io.cdb_bytes; 7782 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7783 scsi_cmd->opcode = LOG_SENSE; 7784 scsi_cmd->page = page_code | page; 7785 if (save_pages != 0) 7786 scsi_cmd->byte2 |= SLS_SP; 7787 if (ppc != 0) 7788 scsi_cmd->byte2 |= SLS_PPC; 7789 scsi_ulto2b(paramptr, scsi_cmd->paramptr); 7790 scsi_ulto2b(param_len, scsi_cmd->length); 7791 cdb_len = sizeof(*scsi_cmd); 7792 7793 cam_fill_csio(csio, 7794 retries, 7795 cbfcnp, 7796 /*flags*/CAM_DIR_IN, 7797 tag_action, 7798 /*data_ptr*/param_buf, 7799 /*dxfer_len*/param_len, 7800 sense_len, 7801 cdb_len, 7802 timeout); 7803} 7804 7805void 7806scsi_log_select(struct ccb_scsiio *csio, u_int32_t retries, 7807 void (*cbfcnp)(struct cam_periph *, union ccb *), 7808 u_int8_t tag_action, u_int8_t page_code, int save_pages, 7809 int pc_reset, u_int8_t *param_buf, u_int32_t param_len, 7810 u_int8_t sense_len, u_int32_t timeout) 7811{ 7812 struct scsi_log_select *scsi_cmd; 7813 u_int8_t cdb_len; 7814 7815 scsi_cmd = (struct scsi_log_select *)&csio->cdb_io.cdb_bytes; 7816 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7817 scsi_cmd->opcode = LOG_SELECT; 7818 scsi_cmd->page = page_code & SLS_PAGE_CODE; 7819 if (save_pages != 0) 7820 scsi_cmd->byte2 |= SLS_SP; 7821 if (pc_reset != 0) 7822 scsi_cmd->byte2 |= SLS_PCR; 7823 scsi_ulto2b(param_len, scsi_cmd->length); 7824 cdb_len = sizeof(*scsi_cmd); 7825 7826 cam_fill_csio(csio, 7827 retries, 7828 cbfcnp, 7829 /*flags*/CAM_DIR_OUT, 7830 tag_action, 7831 /*data_ptr*/param_buf, 7832 /*dxfer_len*/param_len, 7833 sense_len, 7834 cdb_len, 7835 timeout); 7836} 7837 7838/* 7839 * Prevent or allow the user to remove the media 7840 */ 7841void 7842scsi_prevent(struct ccb_scsiio *csio, u_int32_t retries, 7843 void (*cbfcnp)(struct cam_periph *, union ccb *), 7844 u_int8_t tag_action, u_int8_t action, 7845 u_int8_t sense_len, u_int32_t timeout) 7846{ 7847 struct scsi_prevent *scsi_cmd; 7848 7849 cam_fill_csio(csio, 7850 retries, 7851 cbfcnp, 7852 /*flags*/CAM_DIR_NONE, 7853 tag_action, 7854 /*data_ptr*/NULL, 7855 /*dxfer_len*/0, 7856 sense_len, 7857 sizeof(*scsi_cmd), 7858 timeout); 7859 7860 scsi_cmd = (struct scsi_prevent *)&csio->cdb_io.cdb_bytes; 7861 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7862 scsi_cmd->opcode = PREVENT_ALLOW; 7863 scsi_cmd->how = action; 7864} 7865 7866/* XXX allow specification of address and PMI bit and LBA */ 7867void 7868scsi_read_capacity(struct ccb_scsiio *csio, u_int32_t retries, 7869 void (*cbfcnp)(struct cam_periph *, union ccb *), 7870 u_int8_t tag_action, 7871 struct scsi_read_capacity_data *rcap_buf, 7872 u_int8_t sense_len, u_int32_t timeout) 7873{ 7874 struct scsi_read_capacity *scsi_cmd; 7875 7876 cam_fill_csio(csio, 7877 retries, 7878 cbfcnp, 7879 /*flags*/CAM_DIR_IN, 7880 tag_action, 7881 /*data_ptr*/(u_int8_t *)rcap_buf, 7882 /*dxfer_len*/sizeof(*rcap_buf), 7883 sense_len, 7884 sizeof(*scsi_cmd), 7885 timeout); 7886 7887 scsi_cmd = (struct scsi_read_capacity *)&csio->cdb_io.cdb_bytes; 7888 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7889 scsi_cmd->opcode = READ_CAPACITY; 7890} 7891 7892void 7893scsi_read_capacity_16(struct ccb_scsiio *csio, uint32_t retries, 7894 void (*cbfcnp)(struct cam_periph *, union ccb *), 7895 uint8_t tag_action, uint64_t lba, int reladr, int pmi, 7896 uint8_t *rcap_buf, int rcap_buf_len, uint8_t sense_len, 7897 uint32_t timeout) 7898{ 7899 struct scsi_read_capacity_16 *scsi_cmd; 7900 7901 7902 cam_fill_csio(csio, 7903 retries, 7904 cbfcnp, 7905 /*flags*/CAM_DIR_IN, 7906 tag_action, 7907 /*data_ptr*/(u_int8_t *)rcap_buf, 7908 /*dxfer_len*/rcap_buf_len, 7909 sense_len, 7910 sizeof(*scsi_cmd), 7911 timeout); 7912 scsi_cmd = (struct scsi_read_capacity_16 *)&csio->cdb_io.cdb_bytes; 7913 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7914 scsi_cmd->opcode = SERVICE_ACTION_IN; 7915 scsi_cmd->service_action = SRC16_SERVICE_ACTION; 7916 scsi_u64to8b(lba, scsi_cmd->addr); 7917 scsi_ulto4b(rcap_buf_len, scsi_cmd->alloc_len); 7918 if (pmi) 7919 reladr |= SRC16_PMI; 7920 if (reladr) 7921 reladr |= SRC16_RELADR; 7922} 7923 7924void 7925scsi_report_luns(struct ccb_scsiio *csio, u_int32_t retries, 7926 void (*cbfcnp)(struct cam_periph *, union ccb *), 7927 u_int8_t tag_action, u_int8_t select_report, 7928 struct scsi_report_luns_data *rpl_buf, u_int32_t alloc_len, 7929 u_int8_t sense_len, u_int32_t timeout) 7930{ 7931 struct scsi_report_luns *scsi_cmd; 7932 7933 cam_fill_csio(csio, 7934 retries, 7935 cbfcnp, 7936 /*flags*/CAM_DIR_IN, 7937 tag_action, 7938 /*data_ptr*/(u_int8_t *)rpl_buf, 7939 /*dxfer_len*/alloc_len, 7940 sense_len, 7941 sizeof(*scsi_cmd), 7942 timeout); 7943 scsi_cmd = (struct scsi_report_luns *)&csio->cdb_io.cdb_bytes; 7944 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7945 scsi_cmd->opcode = REPORT_LUNS; 7946 scsi_cmd->select_report = select_report; 7947 scsi_ulto4b(alloc_len, scsi_cmd->length); 7948} 7949 7950void 7951scsi_report_target_group(struct ccb_scsiio *csio, u_int32_t retries, 7952 void (*cbfcnp)(struct cam_periph *, union ccb *), 7953 u_int8_t tag_action, u_int8_t pdf, 7954 void *buf, u_int32_t alloc_len, 7955 u_int8_t sense_len, u_int32_t timeout) 7956{ 7957 struct scsi_target_group *scsi_cmd; 7958 7959 cam_fill_csio(csio, 7960 retries, 7961 cbfcnp, 7962 /*flags*/CAM_DIR_IN, 7963 tag_action, 7964 /*data_ptr*/(u_int8_t *)buf, 7965 /*dxfer_len*/alloc_len, 7966 sense_len, 7967 sizeof(*scsi_cmd), 7968 timeout); 7969 scsi_cmd = (struct scsi_target_group *)&csio->cdb_io.cdb_bytes; 7970 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7971 scsi_cmd->opcode = MAINTENANCE_IN; 7972 scsi_cmd->service_action = REPORT_TARGET_PORT_GROUPS | pdf; 7973 scsi_ulto4b(alloc_len, scsi_cmd->length); 7974} 7975 7976void 7977scsi_report_timestamp(struct ccb_scsiio *csio, u_int32_t retries, 7978 void (*cbfcnp)(struct cam_periph *, union ccb *), 7979 u_int8_t tag_action, u_int8_t pdf, 7980 void *buf, u_int32_t alloc_len, 7981 u_int8_t sense_len, u_int32_t timeout) 7982{ 7983 struct scsi_timestamp *scsi_cmd; 7984 7985 cam_fill_csio(csio, 7986 retries, 7987 cbfcnp, 7988 /*flags*/CAM_DIR_IN, 7989 tag_action, 7990 /*data_ptr*/(u_int8_t *)buf, 7991 /*dxfer_len*/alloc_len, 7992 sense_len, 7993 sizeof(*scsi_cmd), 7994 timeout); 7995 scsi_cmd = (struct scsi_timestamp *)&csio->cdb_io.cdb_bytes; 7996 bzero(scsi_cmd, sizeof(*scsi_cmd)); 7997 scsi_cmd->opcode = MAINTENANCE_IN; 7998 scsi_cmd->service_action = REPORT_TIMESTAMP | pdf; 7999 scsi_ulto4b(alloc_len, scsi_cmd->length); 8000} 8001 8002void 8003scsi_set_target_group(struct ccb_scsiio *csio, u_int32_t retries, 8004 void (*cbfcnp)(struct cam_periph *, union ccb *), 8005 u_int8_t tag_action, void *buf, u_int32_t alloc_len, 8006 u_int8_t sense_len, u_int32_t timeout) 8007{ 8008 struct scsi_target_group *scsi_cmd; 8009 8010 cam_fill_csio(csio, 8011 retries, 8012 cbfcnp, 8013 /*flags*/CAM_DIR_OUT, 8014 tag_action, 8015 /*data_ptr*/(u_int8_t *)buf, 8016 /*dxfer_len*/alloc_len, 8017 sense_len, 8018 sizeof(*scsi_cmd), 8019 timeout); 8020 scsi_cmd = (struct scsi_target_group *)&csio->cdb_io.cdb_bytes; 8021 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8022 scsi_cmd->opcode = MAINTENANCE_OUT; 8023 scsi_cmd->service_action = SET_TARGET_PORT_GROUPS; 8024 scsi_ulto4b(alloc_len, scsi_cmd->length); 8025} 8026 8027void 8028scsi_create_timestamp(uint8_t *timestamp_6b_buf, 8029 uint64_t timestamp) 8030{ 8031 uint8_t buf[8]; 8032 scsi_u64to8b(timestamp, buf); 8033 /* 8034 * Using memcopy starting at buf[2] because the set timestamp parameters 8035 * only has six bytes for the timestamp to fit into, and we don't have a 8036 * scsi_u64to6b function. 8037 */ 8038 memcpy(timestamp_6b_buf, &buf[2], 6); 8039} 8040 8041void 8042scsi_set_timestamp(struct ccb_scsiio *csio, u_int32_t retries, 8043 void (*cbfcnp)(struct cam_periph *, union ccb *), 8044 u_int8_t tag_action, void *buf, u_int32_t alloc_len, 8045 u_int8_t sense_len, u_int32_t timeout) 8046{ 8047 struct scsi_timestamp *scsi_cmd; 8048 8049 cam_fill_csio(csio, 8050 retries, 8051 cbfcnp, 8052 /*flags*/CAM_DIR_OUT, 8053 tag_action, 8054 /*data_ptr*/(u_int8_t *) buf, 8055 /*dxfer_len*/alloc_len, 8056 sense_len, 8057 sizeof(*scsi_cmd), 8058 timeout); 8059 scsi_cmd = (struct scsi_timestamp *)&csio->cdb_io.cdb_bytes; 8060 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8061 scsi_cmd->opcode = MAINTENANCE_OUT; 8062 scsi_cmd->service_action = SET_TIMESTAMP; 8063 scsi_ulto4b(alloc_len, scsi_cmd->length); 8064} 8065 8066/* 8067 * Syncronize the media to the contents of the cache for 8068 * the given lba/count pair. Specifying 0/0 means sync 8069 * the whole cache. 8070 */ 8071void 8072scsi_synchronize_cache(struct ccb_scsiio *csio, u_int32_t retries, 8073 void (*cbfcnp)(struct cam_periph *, union ccb *), 8074 u_int8_t tag_action, u_int32_t begin_lba, 8075 u_int16_t lb_count, u_int8_t sense_len, 8076 u_int32_t timeout) 8077{ 8078 struct scsi_sync_cache *scsi_cmd; 8079 8080 cam_fill_csio(csio, 8081 retries, 8082 cbfcnp, 8083 /*flags*/CAM_DIR_NONE, 8084 tag_action, 8085 /*data_ptr*/NULL, 8086 /*dxfer_len*/0, 8087 sense_len, 8088 sizeof(*scsi_cmd), 8089 timeout); 8090 8091 scsi_cmd = (struct scsi_sync_cache *)&csio->cdb_io.cdb_bytes; 8092 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8093 scsi_cmd->opcode = SYNCHRONIZE_CACHE; 8094 scsi_ulto4b(begin_lba, scsi_cmd->begin_lba); 8095 scsi_ulto2b(lb_count, scsi_cmd->lb_count); 8096} 8097 8098void 8099scsi_read_write(struct ccb_scsiio *csio, u_int32_t retries, 8100 void (*cbfcnp)(struct cam_periph *, union ccb *), 8101 u_int8_t tag_action, int readop, u_int8_t byte2, 8102 int minimum_cmd_size, u_int64_t lba, u_int32_t block_count, 8103 u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, 8104 u_int32_t timeout) 8105{ 8106 int read; 8107 u_int8_t cdb_len; 8108 8109 read = (readop & SCSI_RW_DIRMASK) == SCSI_RW_READ; 8110 8111 /* 8112 * Use the smallest possible command to perform the operation 8113 * as some legacy hardware does not support the 10 byte commands. 8114 * If any of the bits in byte2 is set, we have to go with a larger 8115 * command. 8116 */ 8117 if ((minimum_cmd_size < 10) 8118 && ((lba & 0x1fffff) == lba) 8119 && ((block_count & 0xff) == block_count) 8120 && (byte2 == 0)) { 8121 /* 8122 * We can fit in a 6 byte cdb. 8123 */ 8124 struct scsi_rw_6 *scsi_cmd; 8125 8126 scsi_cmd = (struct scsi_rw_6 *)&csio->cdb_io.cdb_bytes; 8127 scsi_cmd->opcode = read ? READ_6 : WRITE_6; 8128 scsi_ulto3b(lba, scsi_cmd->addr); 8129 scsi_cmd->length = block_count & 0xff; 8130 scsi_cmd->control = 0; 8131 cdb_len = sizeof(*scsi_cmd); 8132 8133 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 8134 ("6byte: %x%x%x:%d:%d\n", scsi_cmd->addr[0], 8135 scsi_cmd->addr[1], scsi_cmd->addr[2], 8136 scsi_cmd->length, dxfer_len)); 8137 } else if ((minimum_cmd_size < 12) 8138 && ((block_count & 0xffff) == block_count) 8139 && ((lba & 0xffffffff) == lba)) { 8140 /* 8141 * Need a 10 byte cdb. 8142 */ 8143 struct scsi_rw_10 *scsi_cmd; 8144 8145 scsi_cmd = (struct scsi_rw_10 *)&csio->cdb_io.cdb_bytes; 8146 scsi_cmd->opcode = read ? READ_10 : WRITE_10; 8147 scsi_cmd->byte2 = byte2; 8148 scsi_ulto4b(lba, scsi_cmd->addr); 8149 scsi_cmd->reserved = 0; 8150 scsi_ulto2b(block_count, scsi_cmd->length); 8151 scsi_cmd->control = 0; 8152 cdb_len = sizeof(*scsi_cmd); 8153 8154 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 8155 ("10byte: %x%x%x%x:%x%x: %d\n", scsi_cmd->addr[0], 8156 scsi_cmd->addr[1], scsi_cmd->addr[2], 8157 scsi_cmd->addr[3], scsi_cmd->length[0], 8158 scsi_cmd->length[1], dxfer_len)); 8159 } else if ((minimum_cmd_size < 16) 8160 && ((block_count & 0xffffffff) == block_count) 8161 && ((lba & 0xffffffff) == lba)) { 8162 /* 8163 * The block count is too big for a 10 byte CDB, use a 12 8164 * byte CDB. 8165 */ 8166 struct scsi_rw_12 *scsi_cmd; 8167 8168 scsi_cmd = (struct scsi_rw_12 *)&csio->cdb_io.cdb_bytes; 8169 scsi_cmd->opcode = read ? READ_12 : WRITE_12; 8170 scsi_cmd->byte2 = byte2; 8171 scsi_ulto4b(lba, scsi_cmd->addr); 8172 scsi_cmd->reserved = 0; 8173 scsi_ulto4b(block_count, scsi_cmd->length); 8174 scsi_cmd->control = 0; 8175 cdb_len = sizeof(*scsi_cmd); 8176 8177 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 8178 ("12byte: %x%x%x%x:%x%x%x%x: %d\n", scsi_cmd->addr[0], 8179 scsi_cmd->addr[1], scsi_cmd->addr[2], 8180 scsi_cmd->addr[3], scsi_cmd->length[0], 8181 scsi_cmd->length[1], scsi_cmd->length[2], 8182 scsi_cmd->length[3], dxfer_len)); 8183 } else { 8184 /* 8185 * 16 byte CDB. We'll only get here if the LBA is larger 8186 * than 2^32, or if the user asks for a 16 byte command. 8187 */ 8188 struct scsi_rw_16 *scsi_cmd; 8189 8190 scsi_cmd = (struct scsi_rw_16 *)&csio->cdb_io.cdb_bytes; 8191 scsi_cmd->opcode = read ? READ_16 : WRITE_16; 8192 scsi_cmd->byte2 = byte2; 8193 scsi_u64to8b(lba, scsi_cmd->addr); 8194 scsi_cmd->reserved = 0; 8195 scsi_ulto4b(block_count, scsi_cmd->length); 8196 scsi_cmd->control = 0; 8197 cdb_len = sizeof(*scsi_cmd); 8198 } 8199 cam_fill_csio(csio, 8200 retries, 8201 cbfcnp, 8202 (read ? CAM_DIR_IN : CAM_DIR_OUT) | 8203 ((readop & SCSI_RW_BIO) != 0 ? CAM_DATA_BIO : 0), 8204 tag_action, 8205 data_ptr, 8206 dxfer_len, 8207 sense_len, 8208 cdb_len, 8209 timeout); 8210} 8211 8212void 8213scsi_write_same(struct ccb_scsiio *csio, u_int32_t retries, 8214 void (*cbfcnp)(struct cam_periph *, union ccb *), 8215 u_int8_t tag_action, u_int8_t byte2, 8216 int minimum_cmd_size, u_int64_t lba, u_int32_t block_count, 8217 u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, 8218 u_int32_t timeout) 8219{ 8220 u_int8_t cdb_len; 8221 if ((minimum_cmd_size < 16) && 8222 ((block_count & 0xffff) == block_count) && 8223 ((lba & 0xffffffff) == lba)) { 8224 /* 8225 * Need a 10 byte cdb. 8226 */ 8227 struct scsi_write_same_10 *scsi_cmd; 8228 8229 scsi_cmd = (struct scsi_write_same_10 *)&csio->cdb_io.cdb_bytes; 8230 scsi_cmd->opcode = WRITE_SAME_10; 8231 scsi_cmd->byte2 = byte2; 8232 scsi_ulto4b(lba, scsi_cmd->addr); 8233 scsi_cmd->group = 0; 8234 scsi_ulto2b(block_count, scsi_cmd->length); 8235 scsi_cmd->control = 0; 8236 cdb_len = sizeof(*scsi_cmd); 8237 8238 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 8239 ("10byte: %x%x%x%x:%x%x: %d\n", scsi_cmd->addr[0], 8240 scsi_cmd->addr[1], scsi_cmd->addr[2], 8241 scsi_cmd->addr[3], scsi_cmd->length[0], 8242 scsi_cmd->length[1], dxfer_len)); 8243 } else { 8244 /* 8245 * 16 byte CDB. We'll only get here if the LBA is larger 8246 * than 2^32, or if the user asks for a 16 byte command. 8247 */ 8248 struct scsi_write_same_16 *scsi_cmd; 8249 8250 scsi_cmd = (struct scsi_write_same_16 *)&csio->cdb_io.cdb_bytes; 8251 scsi_cmd->opcode = WRITE_SAME_16; 8252 scsi_cmd->byte2 = byte2; 8253 scsi_u64to8b(lba, scsi_cmd->addr); 8254 scsi_ulto4b(block_count, scsi_cmd->length); 8255 scsi_cmd->group = 0; 8256 scsi_cmd->control = 0; 8257 cdb_len = sizeof(*scsi_cmd); 8258 8259 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 8260 ("16byte: %x%x%x%x%x%x%x%x:%x%x%x%x: %d\n", 8261 scsi_cmd->addr[0], scsi_cmd->addr[1], 8262 scsi_cmd->addr[2], scsi_cmd->addr[3], 8263 scsi_cmd->addr[4], scsi_cmd->addr[5], 8264 scsi_cmd->addr[6], scsi_cmd->addr[7], 8265 scsi_cmd->length[0], scsi_cmd->length[1], 8266 scsi_cmd->length[2], scsi_cmd->length[3], 8267 dxfer_len)); 8268 } 8269 cam_fill_csio(csio, 8270 retries, 8271 cbfcnp, 8272 /*flags*/CAM_DIR_OUT, 8273 tag_action, 8274 data_ptr, 8275 dxfer_len, 8276 sense_len, 8277 cdb_len, 8278 timeout); 8279} 8280 8281void 8282scsi_ata_identify(struct ccb_scsiio *csio, u_int32_t retries, 8283 void (*cbfcnp)(struct cam_periph *, union ccb *), 8284 u_int8_t tag_action, u_int8_t *data_ptr, 8285 u_int16_t dxfer_len, u_int8_t sense_len, 8286 u_int32_t timeout) 8287{ 8288 scsi_ata_pass(csio, 8289 retries, 8290 cbfcnp, 8291 /*flags*/CAM_DIR_IN, 8292 tag_action, 8293 /*protocol*/AP_PROTO_PIO_IN, 8294 /*ata_flags*/AP_FLAG_TDIR_FROM_DEV | 8295 AP_FLAG_BYT_BLOK_BLOCKS | 8296 AP_FLAG_TLEN_SECT_CNT, 8297 /*features*/0, 8298 /*sector_count*/dxfer_len / 512, 8299 /*lba*/0, 8300 /*command*/ATA_ATA_IDENTIFY, 8301 /*device*/ 0, 8302 /*icc*/ 0, 8303 /*auxiliary*/ 0, 8304 /*control*/0, 8305 data_ptr, 8306 dxfer_len, 8307 /*cdb_storage*/ NULL, 8308 /*cdb_storage_len*/ 0, 8309 /*minimum_cmd_size*/ 0, 8310 sense_len, 8311 timeout); 8312} 8313 8314void 8315scsi_ata_trim(struct ccb_scsiio *csio, u_int32_t retries, 8316 void (*cbfcnp)(struct cam_periph *, union ccb *), 8317 u_int8_t tag_action, u_int16_t block_count, 8318 u_int8_t *data_ptr, u_int16_t dxfer_len, u_int8_t sense_len, 8319 u_int32_t timeout) 8320{ 8321 scsi_ata_pass_16(csio, 8322 retries, 8323 cbfcnp, 8324 /*flags*/CAM_DIR_OUT, 8325 tag_action, 8326 /*protocol*/AP_EXTEND|AP_PROTO_DMA, 8327 /*ata_flags*/AP_FLAG_TLEN_SECT_CNT|AP_FLAG_BYT_BLOK_BLOCKS, 8328 /*features*/ATA_DSM_TRIM, 8329 /*sector_count*/block_count, 8330 /*lba*/0, 8331 /*command*/ATA_DATA_SET_MANAGEMENT, 8332 /*control*/0, 8333 data_ptr, 8334 dxfer_len, 8335 sense_len, 8336 timeout); 8337} 8338 8339int 8340scsi_ata_read_log(struct ccb_scsiio *csio, uint32_t retries, 8341 void (*cbfcnp)(struct cam_periph *, union ccb *), 8342 uint8_t tag_action, uint32_t log_address, 8343 uint32_t page_number, uint16_t block_count, 8344 uint8_t protocol, uint8_t *data_ptr, uint32_t dxfer_len, 8345 uint8_t sense_len, uint32_t timeout) 8346{ 8347 uint8_t command, protocol_out; 8348 uint16_t count_out; 8349 uint64_t lba; 8350 int retval; 8351 8352 retval = 0; 8353 8354 switch (protocol) { 8355 case AP_PROTO_DMA: 8356 count_out = block_count; 8357 command = ATA_READ_LOG_DMA_EXT; 8358 protocol_out = AP_PROTO_DMA; 8359 break; 8360 case AP_PROTO_PIO_IN: 8361 default: 8362 count_out = block_count; 8363 command = ATA_READ_LOG_EXT; 8364 protocol_out = AP_PROTO_PIO_IN; 8365 break; 8366 } 8367 8368 lba = (((uint64_t)page_number & 0xff00) << 32) | 8369 ((page_number & 0x00ff) << 8) | 8370 (log_address & 0xff); 8371 8372 protocol_out |= AP_EXTEND; 8373 8374 retval = scsi_ata_pass(csio, 8375 retries, 8376 cbfcnp, 8377 /*flags*/CAM_DIR_IN, 8378 tag_action, 8379 /*protocol*/ protocol_out, 8380 /*ata_flags*/AP_FLAG_TLEN_SECT_CNT | 8381 AP_FLAG_BYT_BLOK_BLOCKS | 8382 AP_FLAG_TDIR_FROM_DEV, 8383 /*feature*/ 0, 8384 /*sector_count*/ count_out, 8385 /*lba*/ lba, 8386 /*command*/ command, 8387 /*device*/ 0, 8388 /*icc*/ 0, 8389 /*auxiliary*/ 0, 8390 /*control*/0, 8391 data_ptr, 8392 dxfer_len, 8393 /*cdb_storage*/ NULL, 8394 /*cdb_storage_len*/ 0, 8395 /*minimum_cmd_size*/ 0, 8396 sense_len, 8397 timeout); 8398 8399 return (retval); 8400} 8401 8402int scsi_ata_setfeatures(struct ccb_scsiio *csio, uint32_t retries, 8403 void (*cbfcnp)(struct cam_periph *, union ccb *), 8404 uint8_t tag_action, uint8_t feature, 8405 uint64_t lba, uint32_t count, 8406 uint8_t sense_len, uint32_t timeout) 8407{ 8408 return (scsi_ata_pass(csio, 8409 retries, 8410 cbfcnp, 8411 /*flags*/CAM_DIR_NONE, 8412 tag_action, 8413 /*protocol*/AP_PROTO_PIO_IN, 8414 /*ata_flags*/AP_FLAG_TDIR_FROM_DEV | 8415 AP_FLAG_BYT_BLOK_BYTES | 8416 AP_FLAG_TLEN_SECT_CNT, 8417 /*features*/feature, 8418 /*sector_count*/count, 8419 /*lba*/lba, 8420 /*command*/ATA_SETFEATURES, 8421 /*device*/ 0, 8422 /*icc*/ 0, 8423 /*auxiliary*/0, 8424 /*control*/0, 8425 /*data_ptr*/NULL, 8426 /*dxfer_len*/0, 8427 /*cdb_storage*/NULL, 8428 /*cdb_storage_len*/0, 8429 /*minimum_cmd_size*/0, 8430 sense_len, 8431 timeout)); 8432} 8433 8434/* 8435 * Note! This is an unusual CDB building function because it can return 8436 * an error in the event that the command in question requires a variable 8437 * length CDB, but the caller has not given storage space for one or has not 8438 * given enough storage space. If there is enough space available in the 8439 * standard SCSI CCB CDB bytes, we'll prefer that over passed in storage. 8440 */ 8441int 8442scsi_ata_pass(struct ccb_scsiio *csio, uint32_t retries, 8443 void (*cbfcnp)(struct cam_periph *, union ccb *), 8444 uint32_t flags, uint8_t tag_action, 8445 uint8_t protocol, uint8_t ata_flags, uint16_t features, 8446 uint16_t sector_count, uint64_t lba, uint8_t command, 8447 uint8_t device, uint8_t icc, uint32_t auxiliary, 8448 uint8_t control, u_int8_t *data_ptr, uint32_t dxfer_len, 8449 uint8_t *cdb_storage, size_t cdb_storage_len, 8450 int minimum_cmd_size, u_int8_t sense_len, u_int32_t timeout) 8451{ 8452 uint32_t cam_flags; 8453 uint8_t *cdb_ptr; 8454 int cmd_size; 8455 int retval; 8456 uint8_t cdb_len; 8457 8458 retval = 0; 8459 cam_flags = flags; 8460 8461 /* 8462 * Round the user's request to the nearest command size that is at 8463 * least as big as what he requested. 8464 */ 8465 if (minimum_cmd_size <= 12) 8466 cmd_size = 12; 8467 else if (minimum_cmd_size > 16) 8468 cmd_size = 32; 8469 else 8470 cmd_size = 16; 8471 8472 /* 8473 * If we have parameters that require a 48-bit ATA command, we have to 8474 * use the 16 byte ATA PASS-THROUGH command at least. 8475 */ 8476 if (((lba > ATA_MAX_28BIT_LBA) 8477 || (sector_count > 255) 8478 || (features > 255) 8479 || (protocol & AP_EXTEND)) 8480 && ((cmd_size < 16) 8481 || ((protocol & AP_EXTEND) == 0))) { 8482 if (cmd_size < 16) 8483 cmd_size = 16; 8484 protocol |= AP_EXTEND; 8485 } 8486 8487 /* 8488 * The icc and auxiliary ATA registers are only supported in the 8489 * 32-byte version of the ATA PASS-THROUGH command. 8490 */ 8491 if ((icc != 0) 8492 || (auxiliary != 0)) { 8493 cmd_size = 32; 8494 protocol |= AP_EXTEND; 8495 } 8496 8497 8498 if ((cmd_size > sizeof(csio->cdb_io.cdb_bytes)) 8499 && ((cdb_storage == NULL) 8500 || (cdb_storage_len < cmd_size))) { 8501 retval = 1; 8502 goto bailout; 8503 } 8504 8505 /* 8506 * At this point we know we have enough space to store the command 8507 * in one place or another. We prefer the built-in array, but used 8508 * the passed in storage if necessary. 8509 */ 8510 if (cmd_size <= sizeof(csio->cdb_io.cdb_bytes)) 8511 cdb_ptr = csio->cdb_io.cdb_bytes; 8512 else { 8513 cdb_ptr = cdb_storage; 8514 cam_flags |= CAM_CDB_POINTER; 8515 } 8516 8517 if (cmd_size <= 12) { 8518 struct ata_pass_12 *cdb; 8519 8520 cdb = (struct ata_pass_12 *)cdb_ptr; 8521 cdb_len = sizeof(*cdb); 8522 bzero(cdb, cdb_len); 8523 8524 cdb->opcode = ATA_PASS_12; 8525 cdb->protocol = protocol; 8526 cdb->flags = ata_flags; 8527 cdb->features = features; 8528 cdb->sector_count = sector_count; 8529 cdb->lba_low = lba & 0xff; 8530 cdb->lba_mid = (lba >> 8) & 0xff; 8531 cdb->lba_high = (lba >> 16) & 0xff; 8532 cdb->device = ((lba >> 24) & 0xf) | ATA_DEV_LBA; 8533 cdb->command = command; 8534 cdb->control = control; 8535 } else if (cmd_size <= 16) { 8536 struct ata_pass_16 *cdb; 8537 8538 cdb = (struct ata_pass_16 *)cdb_ptr; 8539 cdb_len = sizeof(*cdb); 8540 bzero(cdb, cdb_len); 8541 8542 cdb->opcode = ATA_PASS_16; 8543 cdb->protocol = protocol; 8544 cdb->flags = ata_flags; 8545 cdb->features = features & 0xff; 8546 cdb->sector_count = sector_count & 0xff; 8547 cdb->lba_low = lba & 0xff; 8548 cdb->lba_mid = (lba >> 8) & 0xff; 8549 cdb->lba_high = (lba >> 16) & 0xff; 8550 /* 8551 * If AP_EXTEND is set, we're sending a 48-bit command. 8552 * Otherwise it's a 28-bit command. 8553 */ 8554 if (protocol & AP_EXTEND) { 8555 cdb->lba_low_ext = (lba >> 24) & 0xff; 8556 cdb->lba_mid_ext = (lba >> 32) & 0xff; 8557 cdb->lba_high_ext = (lba >> 40) & 0xff; 8558 cdb->features_ext = (features >> 8) & 0xff; 8559 cdb->sector_count_ext = (sector_count >> 8) & 0xff; 8560 cdb->device = device | ATA_DEV_LBA; 8561 } else { 8562 cdb->lba_low_ext = (lba >> 24) & 0xf; 8563 cdb->device = ((lba >> 24) & 0xf) | ATA_DEV_LBA; 8564 } 8565 cdb->command = command; 8566 cdb->control = control; 8567 } else { 8568 struct ata_pass_32 *cdb; 8569 uint8_t tmp_lba[8]; 8570 8571 cdb = (struct ata_pass_32 *)cdb_ptr; 8572 cdb_len = sizeof(*cdb); 8573 bzero(cdb, cdb_len); 8574 cdb->opcode = VARIABLE_LEN_CDB; 8575 cdb->control = control; 8576 cdb->length = sizeof(*cdb) - __offsetof(struct ata_pass_32, 8577 service_action); 8578 scsi_ulto2b(ATA_PASS_32_SA, cdb->service_action); 8579 cdb->protocol = protocol; 8580 cdb->flags = ata_flags; 8581 8582 if ((protocol & AP_EXTEND) == 0) { 8583 lba &= 0x0fffffff; 8584 cdb->device = ((lba >> 24) & 0xf) | ATA_DEV_LBA; 8585 features &= 0xff; 8586 sector_count &= 0xff; 8587 } else { 8588 cdb->device = device | ATA_DEV_LBA; 8589 } 8590 scsi_u64to8b(lba, tmp_lba); 8591 bcopy(&tmp_lba[2], cdb->lba, sizeof(cdb->lba)); 8592 scsi_ulto2b(features, cdb->features); 8593 scsi_ulto2b(sector_count, cdb->count); 8594 cdb->command = command; 8595 cdb->icc = icc; 8596 scsi_ulto4b(auxiliary, cdb->auxiliary); 8597 } 8598 8599 cam_fill_csio(csio, 8600 retries, 8601 cbfcnp, 8602 cam_flags, 8603 tag_action, 8604 data_ptr, 8605 dxfer_len, 8606 sense_len, 8607 cmd_size, 8608 timeout); 8609bailout: 8610 return (retval); 8611} 8612 8613void 8614scsi_ata_pass_16(struct ccb_scsiio *csio, u_int32_t retries, 8615 void (*cbfcnp)(struct cam_periph *, union ccb *), 8616 u_int32_t flags, u_int8_t tag_action, 8617 u_int8_t protocol, u_int8_t ata_flags, u_int16_t features, 8618 u_int16_t sector_count, uint64_t lba, u_int8_t command, 8619 u_int8_t control, u_int8_t *data_ptr, u_int16_t dxfer_len, 8620 u_int8_t sense_len, u_int32_t timeout) 8621{ 8622 struct ata_pass_16 *ata_cmd; 8623 8624 ata_cmd = (struct ata_pass_16 *)&csio->cdb_io.cdb_bytes; 8625 ata_cmd->opcode = ATA_PASS_16; 8626 ata_cmd->protocol = protocol; 8627 ata_cmd->flags = ata_flags; 8628 ata_cmd->features_ext = features >> 8; 8629 ata_cmd->features = features; 8630 ata_cmd->sector_count_ext = sector_count >> 8; 8631 ata_cmd->sector_count = sector_count; 8632 ata_cmd->lba_low = lba; 8633 ata_cmd->lba_mid = lba >> 8; 8634 ata_cmd->lba_high = lba >> 16; 8635 ata_cmd->device = ATA_DEV_LBA; 8636 if (protocol & AP_EXTEND) { 8637 ata_cmd->lba_low_ext = lba >> 24; 8638 ata_cmd->lba_mid_ext = lba >> 32; 8639 ata_cmd->lba_high_ext = lba >> 40; 8640 } else 8641 ata_cmd->device |= (lba >> 24) & 0x0f; 8642 ata_cmd->command = command; 8643 ata_cmd->control = control; 8644 8645 cam_fill_csio(csio, 8646 retries, 8647 cbfcnp, 8648 flags, 8649 tag_action, 8650 data_ptr, 8651 dxfer_len, 8652 sense_len, 8653 sizeof(*ata_cmd), 8654 timeout); 8655} 8656 8657void 8658scsi_unmap(struct ccb_scsiio *csio, u_int32_t retries, 8659 void (*cbfcnp)(struct cam_periph *, union ccb *), 8660 u_int8_t tag_action, u_int8_t byte2, 8661 u_int8_t *data_ptr, u_int16_t dxfer_len, u_int8_t sense_len, 8662 u_int32_t timeout) 8663{ 8664 struct scsi_unmap *scsi_cmd; 8665 8666 scsi_cmd = (struct scsi_unmap *)&csio->cdb_io.cdb_bytes; 8667 scsi_cmd->opcode = UNMAP; 8668 scsi_cmd->byte2 = byte2; 8669 scsi_ulto4b(0, scsi_cmd->reserved); 8670 scsi_cmd->group = 0; 8671 scsi_ulto2b(dxfer_len, scsi_cmd->length); 8672 scsi_cmd->control = 0; 8673 8674 cam_fill_csio(csio, 8675 retries, 8676 cbfcnp, 8677 /*flags*/CAM_DIR_OUT, 8678 tag_action, 8679 data_ptr, 8680 dxfer_len, 8681 sense_len, 8682 sizeof(*scsi_cmd), 8683 timeout); 8684} 8685 8686void 8687scsi_receive_diagnostic_results(struct ccb_scsiio *csio, u_int32_t retries, 8688 void (*cbfcnp)(struct cam_periph *, union ccb*), 8689 uint8_t tag_action, int pcv, uint8_t page_code, 8690 uint8_t *data_ptr, uint16_t allocation_length, 8691 uint8_t sense_len, uint32_t timeout) 8692{ 8693 struct scsi_receive_diag *scsi_cmd; 8694 8695 scsi_cmd = (struct scsi_receive_diag *)&csio->cdb_io.cdb_bytes; 8696 memset(scsi_cmd, 0, sizeof(*scsi_cmd)); 8697 scsi_cmd->opcode = RECEIVE_DIAGNOSTIC; 8698 if (pcv) { 8699 scsi_cmd->byte2 |= SRD_PCV; 8700 scsi_cmd->page_code = page_code; 8701 } 8702 scsi_ulto2b(allocation_length, scsi_cmd->length); 8703 8704 cam_fill_csio(csio, 8705 retries, 8706 cbfcnp, 8707 /*flags*/CAM_DIR_IN, 8708 tag_action, 8709 data_ptr, 8710 allocation_length, 8711 sense_len, 8712 sizeof(*scsi_cmd), 8713 timeout); 8714} 8715 8716void 8717scsi_send_diagnostic(struct ccb_scsiio *csio, u_int32_t retries, 8718 void (*cbfcnp)(struct cam_periph *, union ccb *), 8719 uint8_t tag_action, int unit_offline, int device_offline, 8720 int self_test, int page_format, int self_test_code, 8721 uint8_t *data_ptr, uint16_t param_list_length, 8722 uint8_t sense_len, uint32_t timeout) 8723{ 8724 struct scsi_send_diag *scsi_cmd; 8725 8726 scsi_cmd = (struct scsi_send_diag *)&csio->cdb_io.cdb_bytes; 8727 memset(scsi_cmd, 0, sizeof(*scsi_cmd)); 8728 scsi_cmd->opcode = SEND_DIAGNOSTIC; 8729 8730 /* 8731 * The default self-test mode control and specific test 8732 * control are mutually exclusive. 8733 */ 8734 if (self_test) 8735 self_test_code = SSD_SELF_TEST_CODE_NONE; 8736 8737 scsi_cmd->byte2 = ((self_test_code << SSD_SELF_TEST_CODE_SHIFT) 8738 & SSD_SELF_TEST_CODE_MASK) 8739 | (unit_offline ? SSD_UNITOFFL : 0) 8740 | (device_offline ? SSD_DEVOFFL : 0) 8741 | (self_test ? SSD_SELFTEST : 0) 8742 | (page_format ? SSD_PF : 0); 8743 scsi_ulto2b(param_list_length, scsi_cmd->length); 8744 8745 cam_fill_csio(csio, 8746 retries, 8747 cbfcnp, 8748 /*flags*/param_list_length ? CAM_DIR_OUT : CAM_DIR_NONE, 8749 tag_action, 8750 data_ptr, 8751 param_list_length, 8752 sense_len, 8753 sizeof(*scsi_cmd), 8754 timeout); 8755} 8756 8757void 8758scsi_read_buffer(struct ccb_scsiio *csio, u_int32_t retries, 8759 void (*cbfcnp)(struct cam_periph *, union ccb*), 8760 uint8_t tag_action, int mode, 8761 uint8_t buffer_id, u_int32_t offset, 8762 uint8_t *data_ptr, uint32_t allocation_length, 8763 uint8_t sense_len, uint32_t timeout) 8764{ 8765 struct scsi_read_buffer *scsi_cmd; 8766 8767 scsi_cmd = (struct scsi_read_buffer *)&csio->cdb_io.cdb_bytes; 8768 memset(scsi_cmd, 0, sizeof(*scsi_cmd)); 8769 scsi_cmd->opcode = READ_BUFFER; 8770 scsi_cmd->byte2 = mode; 8771 scsi_cmd->buffer_id = buffer_id; 8772 scsi_ulto3b(offset, scsi_cmd->offset); 8773 scsi_ulto3b(allocation_length, scsi_cmd->length); 8774 8775 cam_fill_csio(csio, 8776 retries, 8777 cbfcnp, 8778 /*flags*/CAM_DIR_IN, 8779 tag_action, 8780 data_ptr, 8781 allocation_length, 8782 sense_len, 8783 sizeof(*scsi_cmd), 8784 timeout); 8785} 8786 8787void 8788scsi_write_buffer(struct ccb_scsiio *csio, u_int32_t retries, 8789 void (*cbfcnp)(struct cam_periph *, union ccb *), 8790 uint8_t tag_action, int mode, 8791 uint8_t buffer_id, u_int32_t offset, 8792 uint8_t *data_ptr, uint32_t param_list_length, 8793 uint8_t sense_len, uint32_t timeout) 8794{ 8795 struct scsi_write_buffer *scsi_cmd; 8796 8797 scsi_cmd = (struct scsi_write_buffer *)&csio->cdb_io.cdb_bytes; 8798 memset(scsi_cmd, 0, sizeof(*scsi_cmd)); 8799 scsi_cmd->opcode = WRITE_BUFFER; 8800 scsi_cmd->byte2 = mode; 8801 scsi_cmd->buffer_id = buffer_id; 8802 scsi_ulto3b(offset, scsi_cmd->offset); 8803 scsi_ulto3b(param_list_length, scsi_cmd->length); 8804 8805 cam_fill_csio(csio, 8806 retries, 8807 cbfcnp, 8808 /*flags*/param_list_length ? CAM_DIR_OUT : CAM_DIR_NONE, 8809 tag_action, 8810 data_ptr, 8811 param_list_length, 8812 sense_len, 8813 sizeof(*scsi_cmd), 8814 timeout); 8815} 8816 8817void 8818scsi_start_stop(struct ccb_scsiio *csio, u_int32_t retries, 8819 void (*cbfcnp)(struct cam_periph *, union ccb *), 8820 u_int8_t tag_action, int start, int load_eject, 8821 int immediate, u_int8_t sense_len, u_int32_t timeout) 8822{ 8823 struct scsi_start_stop_unit *scsi_cmd; 8824 int extra_flags = 0; 8825 8826 scsi_cmd = (struct scsi_start_stop_unit *)&csio->cdb_io.cdb_bytes; 8827 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8828 scsi_cmd->opcode = START_STOP_UNIT; 8829 if (start != 0) { 8830 scsi_cmd->how |= SSS_START; 8831 /* it takes a lot of power to start a drive */ 8832 extra_flags |= CAM_HIGH_POWER; 8833 } 8834 if (load_eject != 0) 8835 scsi_cmd->how |= SSS_LOEJ; 8836 if (immediate != 0) 8837 scsi_cmd->byte2 |= SSS_IMMED; 8838 8839 cam_fill_csio(csio, 8840 retries, 8841 cbfcnp, 8842 /*flags*/CAM_DIR_NONE | extra_flags, 8843 tag_action, 8844 /*data_ptr*/NULL, 8845 /*dxfer_len*/0, 8846 sense_len, 8847 sizeof(*scsi_cmd), 8848 timeout); 8849} 8850 8851void 8852scsi_read_attribute(struct ccb_scsiio *csio, u_int32_t retries, 8853 void (*cbfcnp)(struct cam_periph *, union ccb *), 8854 u_int8_t tag_action, u_int8_t service_action, 8855 uint32_t element, u_int8_t elem_type, int logical_volume, 8856 int partition, u_int32_t first_attribute, int cache, 8857 u_int8_t *data_ptr, u_int32_t length, int sense_len, 8858 u_int32_t timeout) 8859{ 8860 struct scsi_read_attribute *scsi_cmd; 8861 8862 scsi_cmd = (struct scsi_read_attribute *)&csio->cdb_io.cdb_bytes; 8863 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8864 8865 scsi_cmd->opcode = READ_ATTRIBUTE; 8866 scsi_cmd->service_action = service_action; 8867 scsi_ulto2b(element, scsi_cmd->element); 8868 scsi_cmd->elem_type = elem_type; 8869 scsi_cmd->logical_volume = logical_volume; 8870 scsi_cmd->partition = partition; 8871 scsi_ulto2b(first_attribute, scsi_cmd->first_attribute); 8872 scsi_ulto4b(length, scsi_cmd->length); 8873 if (cache != 0) 8874 scsi_cmd->cache |= SRA_CACHE; 8875 8876 cam_fill_csio(csio, 8877 retries, 8878 cbfcnp, 8879 /*flags*/CAM_DIR_IN, 8880 tag_action, 8881 /*data_ptr*/data_ptr, 8882 /*dxfer_len*/length, 8883 sense_len, 8884 sizeof(*scsi_cmd), 8885 timeout); 8886} 8887 8888void 8889scsi_write_attribute(struct ccb_scsiio *csio, u_int32_t retries, 8890 void (*cbfcnp)(struct cam_periph *, union ccb *), 8891 u_int8_t tag_action, uint32_t element, int logical_volume, 8892 int partition, int wtc, u_int8_t *data_ptr, 8893 u_int32_t length, int sense_len, u_int32_t timeout) 8894{ 8895 struct scsi_write_attribute *scsi_cmd; 8896 8897 scsi_cmd = (struct scsi_write_attribute *)&csio->cdb_io.cdb_bytes; 8898 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8899 8900 scsi_cmd->opcode = WRITE_ATTRIBUTE; 8901 if (wtc != 0) 8902 scsi_cmd->byte2 = SWA_WTC; 8903 scsi_ulto3b(element, scsi_cmd->element); 8904 scsi_cmd->logical_volume = logical_volume; 8905 scsi_cmd->partition = partition; 8906 scsi_ulto4b(length, scsi_cmd->length); 8907 8908 cam_fill_csio(csio, 8909 retries, 8910 cbfcnp, 8911 /*flags*/CAM_DIR_OUT, 8912 tag_action, 8913 /*data_ptr*/data_ptr, 8914 /*dxfer_len*/length, 8915 sense_len, 8916 sizeof(*scsi_cmd), 8917 timeout); 8918} 8919 8920void 8921scsi_persistent_reserve_in(struct ccb_scsiio *csio, uint32_t retries, 8922 void (*cbfcnp)(struct cam_periph *, union ccb *), 8923 uint8_t tag_action, int service_action, 8924 uint8_t *data_ptr, uint32_t dxfer_len, int sense_len, 8925 int timeout) 8926{ 8927 struct scsi_per_res_in *scsi_cmd; 8928 8929 scsi_cmd = (struct scsi_per_res_in *)&csio->cdb_io.cdb_bytes; 8930 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8931 8932 scsi_cmd->opcode = PERSISTENT_RES_IN; 8933 scsi_cmd->action = service_action; 8934 scsi_ulto2b(dxfer_len, scsi_cmd->length); 8935 8936 cam_fill_csio(csio, 8937 retries, 8938 cbfcnp, 8939 /*flags*/CAM_DIR_IN, 8940 tag_action, 8941 data_ptr, 8942 dxfer_len, 8943 sense_len, 8944 sizeof(*scsi_cmd), 8945 timeout); 8946} 8947 8948void 8949scsi_persistent_reserve_out(struct ccb_scsiio *csio, uint32_t retries, 8950 void (*cbfcnp)(struct cam_periph *, union ccb *), 8951 uint8_t tag_action, int service_action, 8952 int scope, int res_type, uint8_t *data_ptr, 8953 uint32_t dxfer_len, int sense_len, int timeout) 8954{ 8955 struct scsi_per_res_out *scsi_cmd; 8956 8957 scsi_cmd = (struct scsi_per_res_out *)&csio->cdb_io.cdb_bytes; 8958 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8959 8960 scsi_cmd->opcode = PERSISTENT_RES_OUT; 8961 scsi_cmd->action = service_action; 8962 scsi_cmd->scope_type = scope | res_type; 8963 scsi_ulto4b(dxfer_len, scsi_cmd->length); 8964 8965 cam_fill_csio(csio, 8966 retries, 8967 cbfcnp, 8968 /*flags*/CAM_DIR_OUT, 8969 tag_action, 8970 /*data_ptr*/data_ptr, 8971 /*dxfer_len*/dxfer_len, 8972 sense_len, 8973 sizeof(*scsi_cmd), 8974 timeout); 8975} 8976 8977void 8978scsi_security_protocol_in(struct ccb_scsiio *csio, uint32_t retries, 8979 void (*cbfcnp)(struct cam_periph *, union ccb *), 8980 uint8_t tag_action, uint32_t security_protocol, 8981 uint32_t security_protocol_specific, int byte4, 8982 uint8_t *data_ptr, uint32_t dxfer_len, int sense_len, 8983 int timeout) 8984{ 8985 struct scsi_security_protocol_in *scsi_cmd; 8986 8987 scsi_cmd = (struct scsi_security_protocol_in *)&csio->cdb_io.cdb_bytes; 8988 bzero(scsi_cmd, sizeof(*scsi_cmd)); 8989 8990 scsi_cmd->opcode = SECURITY_PROTOCOL_IN; 8991 8992 scsi_cmd->security_protocol = security_protocol; 8993 scsi_ulto2b(security_protocol_specific, 8994 scsi_cmd->security_protocol_specific); 8995 scsi_cmd->byte4 = byte4; 8996 scsi_ulto4b(dxfer_len, scsi_cmd->length); 8997 8998 cam_fill_csio(csio, 8999 retries, 9000 cbfcnp, 9001 /*flags*/CAM_DIR_IN, 9002 tag_action, 9003 data_ptr, 9004 dxfer_len, 9005 sense_len, 9006 sizeof(*scsi_cmd), 9007 timeout); 9008} 9009 9010void 9011scsi_security_protocol_out(struct ccb_scsiio *csio, uint32_t retries, 9012 void (*cbfcnp)(struct cam_periph *, union ccb *), 9013 uint8_t tag_action, uint32_t security_protocol, 9014 uint32_t security_protocol_specific, int byte4, 9015 uint8_t *data_ptr, uint32_t dxfer_len, int sense_len, 9016 int timeout) 9017{ 9018 struct scsi_security_protocol_out *scsi_cmd; 9019 9020 scsi_cmd = (struct scsi_security_protocol_out *)&csio->cdb_io.cdb_bytes; 9021 bzero(scsi_cmd, sizeof(*scsi_cmd)); 9022 9023 scsi_cmd->opcode = SECURITY_PROTOCOL_OUT; 9024 9025 scsi_cmd->security_protocol = security_protocol; 9026 scsi_ulto2b(security_protocol_specific, 9027 scsi_cmd->security_protocol_specific); 9028 scsi_cmd->byte4 = byte4; 9029 scsi_ulto4b(dxfer_len, scsi_cmd->length); 9030 9031 cam_fill_csio(csio, 9032 retries, 9033 cbfcnp, 9034 /*flags*/CAM_DIR_OUT, 9035 tag_action, 9036 data_ptr, 9037 dxfer_len, 9038 sense_len, 9039 sizeof(*scsi_cmd), 9040 timeout); 9041} 9042 9043void 9044scsi_report_supported_opcodes(struct ccb_scsiio *csio, uint32_t retries, 9045 void (*cbfcnp)(struct cam_periph *, union ccb *), 9046 uint8_t tag_action, int options, int req_opcode, 9047 int req_service_action, uint8_t *data_ptr, 9048 uint32_t dxfer_len, int sense_len, int timeout) 9049{ 9050 struct scsi_report_supported_opcodes *scsi_cmd; 9051 9052 scsi_cmd = (struct scsi_report_supported_opcodes *) 9053 &csio->cdb_io.cdb_bytes; 9054 bzero(scsi_cmd, sizeof(*scsi_cmd)); 9055 9056 scsi_cmd->opcode = MAINTENANCE_IN; 9057 scsi_cmd->service_action = REPORT_SUPPORTED_OPERATION_CODES; 9058 scsi_cmd->options = options; 9059 scsi_cmd->requested_opcode = req_opcode; 9060 scsi_ulto2b(req_service_action, scsi_cmd->requested_service_action); 9061 scsi_ulto4b(dxfer_len, scsi_cmd->length); 9062 9063 cam_fill_csio(csio, 9064 retries, 9065 cbfcnp, 9066 /*flags*/CAM_DIR_IN, 9067 tag_action, 9068 data_ptr, 9069 dxfer_len, 9070 sense_len, 9071 sizeof(*scsi_cmd), 9072 timeout); 9073} 9074 9075/* 9076 * Try make as good a match as possible with 9077 * available sub drivers 9078 */ 9079int 9080scsi_inquiry_match(caddr_t inqbuffer, caddr_t table_entry) 9081{ 9082 struct scsi_inquiry_pattern *entry; 9083 struct scsi_inquiry_data *inq; 9084 9085 entry = (struct scsi_inquiry_pattern *)table_entry; 9086 inq = (struct scsi_inquiry_data *)inqbuffer; 9087 9088 if (((SID_TYPE(inq) == entry->type) 9089 || (entry->type == T_ANY)) 9090 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE 9091 : entry->media_type & SIP_MEDIA_FIXED) 9092 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0) 9093 && (cam_strmatch(inq->product, entry->product, 9094 sizeof(inq->product)) == 0) 9095 && (cam_strmatch(inq->revision, entry->revision, 9096 sizeof(inq->revision)) == 0)) { 9097 return (0); 9098 } 9099 return (-1); 9100} 9101 9102/* 9103 * Try make as good a match as possible with 9104 * available sub drivers 9105 */ 9106int 9107scsi_static_inquiry_match(caddr_t inqbuffer, caddr_t table_entry) 9108{ 9109 struct scsi_static_inquiry_pattern *entry; 9110 struct scsi_inquiry_data *inq; 9111 9112 entry = (struct scsi_static_inquiry_pattern *)table_entry; 9113 inq = (struct scsi_inquiry_data *)inqbuffer; 9114 9115 if (((SID_TYPE(inq) == entry->type) 9116 || (entry->type == T_ANY)) 9117 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE 9118 : entry->media_type & SIP_MEDIA_FIXED) 9119 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0) 9120 && (cam_strmatch(inq->product, entry->product, 9121 sizeof(inq->product)) == 0) 9122 && (cam_strmatch(inq->revision, entry->revision, 9123 sizeof(inq->revision)) == 0)) { 9124 return (0); 9125 } 9126 return (-1); 9127} 9128 9129/** 9130 * Compare two buffers of vpd device descriptors for a match. 9131 * 9132 * \param lhs Pointer to first buffer of descriptors to compare. 9133 * \param lhs_len The length of the first buffer. 9134 * \param rhs Pointer to second buffer of descriptors to compare. 9135 * \param rhs_len The length of the second buffer. 9136 * 9137 * \return 0 on a match, -1 otherwise. 9138 * 9139 * Treat rhs and lhs as arrays of vpd device id descriptors. Walk lhs matching 9140 * against each element in rhs until all data are exhausted or we have found 9141 * a match. 9142 */ 9143int 9144scsi_devid_match(uint8_t *lhs, size_t lhs_len, uint8_t *rhs, size_t rhs_len) 9145{ 9146 struct scsi_vpd_id_descriptor *lhs_id; 9147 struct scsi_vpd_id_descriptor *lhs_last; 9148 struct scsi_vpd_id_descriptor *rhs_last; 9149 uint8_t *lhs_end; 9150 uint8_t *rhs_end; 9151 9152 lhs_end = lhs + lhs_len; 9153 rhs_end = rhs + rhs_len; 9154 9155 /* 9156 * rhs_last and lhs_last are the last posible position of a valid 9157 * descriptor assuming it had a zero length identifier. We use 9158 * these variables to insure we can safely dereference the length 9159 * field in our loop termination tests. 9160 */ 9161 lhs_last = (struct scsi_vpd_id_descriptor *) 9162 (lhs_end - __offsetof(struct scsi_vpd_id_descriptor, identifier)); 9163 rhs_last = (struct scsi_vpd_id_descriptor *) 9164 (rhs_end - __offsetof(struct scsi_vpd_id_descriptor, identifier)); 9165 9166 lhs_id = (struct scsi_vpd_id_descriptor *)lhs; 9167 while (lhs_id <= lhs_last 9168 && (lhs_id->identifier + lhs_id->length) <= lhs_end) { 9169 struct scsi_vpd_id_descriptor *rhs_id; 9170 9171 rhs_id = (struct scsi_vpd_id_descriptor *)rhs; 9172 while (rhs_id <= rhs_last 9173 && (rhs_id->identifier + rhs_id->length) <= rhs_end) { 9174 9175 if ((rhs_id->id_type & 9176 (SVPD_ID_ASSOC_MASK | SVPD_ID_TYPE_MASK)) == 9177 (lhs_id->id_type & 9178 (SVPD_ID_ASSOC_MASK | SVPD_ID_TYPE_MASK)) 9179 && rhs_id->length == lhs_id->length 9180 && memcmp(rhs_id->identifier, lhs_id->identifier, 9181 rhs_id->length) == 0) 9182 return (0); 9183 9184 rhs_id = (struct scsi_vpd_id_descriptor *) 9185 (rhs_id->identifier + rhs_id->length); 9186 } 9187 lhs_id = (struct scsi_vpd_id_descriptor *) 9188 (lhs_id->identifier + lhs_id->length); 9189 } 9190 return (-1); 9191} 9192 9193#ifdef _KERNEL 9194int 9195scsi_vpd_supported_page(struct cam_periph *periph, uint8_t page_id) 9196{ 9197 struct cam_ed *device; 9198 struct scsi_vpd_supported_pages *vpds; 9199 int i, num_pages; 9200 9201 device = periph->path->device; 9202 vpds = (struct scsi_vpd_supported_pages *)device->supported_vpds; 9203 9204 if (vpds != NULL) { 9205 num_pages = device->supported_vpds_len - 9206 SVPD_SUPPORTED_PAGES_HDR_LEN; 9207 for (i = 0; i < num_pages; i++) { 9208 if (vpds->page_list[i] == page_id) 9209 return (1); 9210 } 9211 } 9212 9213 return (0); 9214} 9215 9216static void 9217init_scsi_delay(void) 9218{ 9219 int delay; 9220 9221 delay = SCSI_DELAY; 9222 TUNABLE_INT_FETCH("kern.cam.scsi_delay", &delay); 9223 9224 if (set_scsi_delay(delay) != 0) { 9225 printf("cam: invalid value for tunable kern.cam.scsi_delay\n"); 9226 set_scsi_delay(SCSI_DELAY); 9227 } 9228} 9229SYSINIT(scsi_delay, SI_SUB_TUNABLES, SI_ORDER_ANY, init_scsi_delay, NULL); 9230 9231static int 9232sysctl_scsi_delay(SYSCTL_HANDLER_ARGS) 9233{ 9234 int error, delay; 9235 9236 delay = scsi_delay; 9237 error = sysctl_handle_int(oidp, &delay, 0, req); 9238 if (error != 0 || req->newptr == NULL) 9239 return (error); 9240 return (set_scsi_delay(delay)); 9241} 9242SYSCTL_PROC(_kern_cam, OID_AUTO, scsi_delay, CTLTYPE_INT|CTLFLAG_RW, 9243 0, 0, sysctl_scsi_delay, "I", 9244 "Delay to allow devices to settle after a SCSI bus reset (ms)"); 9245 9246static int 9247set_scsi_delay(int delay) 9248{ 9249 /* 9250 * If someone sets this to 0, we assume that they want the 9251 * minimum allowable bus settle delay. 9252 */ 9253 if (delay == 0) { 9254 printf("cam: using minimum scsi_delay (%dms)\n", 9255 SCSI_MIN_DELAY); 9256 delay = SCSI_MIN_DELAY; 9257 } 9258 if (delay < SCSI_MIN_DELAY) 9259 return (EINVAL); 9260 scsi_delay = delay; 9261 return (0); 9262} 9263#endif /* _KERNEL */ 9264