1/*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright 2013 Oleksandr Tymoshenko <gonzo@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29#include <sys/cdefs.h> 30__FBSDID("$FreeBSD$"); 31 32#include "opt_syscons.h" 33#include <sys/param.h> 34#include <sys/systm.h> 35#include <sys/kernel.h> 36#include <sys/module.h> 37#include <sys/clock.h> 38#include <sys/time.h> 39#include <sys/bus.h> 40#include <sys/lock.h> 41#include <sys/mutex.h> 42#include <sys/resource.h> 43#include <sys/rman.h> 44#include <sys/sysctl.h> 45#include <vm/vm.h> 46#include <vm/pmap.h> 47#include <sys/fbio.h> 48#include <sys/consio.h> 49 50#include <machine/bus.h> 51 52#include <dev/fdt/fdt_common.h> 53#include <dev/ofw/openfirm.h> 54#include <dev/ofw/ofw_bus.h> 55#include <dev/ofw/ofw_bus_subr.h> 56 57#include <dev/videomode/videomode.h> 58#include <dev/videomode/edidvar.h> 59 60#include <dev/fb/fbreg.h> 61#ifdef DEV_SC 62#include <dev/syscons/syscons.h> 63#else /* VT */ 64#include <dev/vt/vt.h> 65#endif 66 67#include <arm/ti/ti_prcm.h> 68#include <arm/ti/ti_scm.h> 69 70#include "am335x_lcd.h" 71#include "am335x_pwm.h" 72 73#include "fb_if.h" 74#include "hdmi_if.h" 75 76#define LCD_PID 0x00 77#define LCD_CTRL 0x04 78#define CTRL_DIV_MASK 0xff 79#define CTRL_DIV_SHIFT 8 80#define CTRL_AUTO_UFLOW_RESTART (1 << 1) 81#define CTRL_RASTER_MODE 1 82#define CTRL_LIDD_MODE 0 83#define LCD_LIDD_CTRL 0x0C 84#define LCD_LIDD_CS0_CONF 0x10 85#define LCD_LIDD_CS0_ADDR 0x14 86#define LCD_LIDD_CS0_DATA 0x18 87#define LCD_LIDD_CS1_CONF 0x1C 88#define LCD_LIDD_CS1_ADDR 0x20 89#define LCD_LIDD_CS1_DATA 0x24 90#define LCD_RASTER_CTRL 0x28 91#define RASTER_CTRL_TFT24_UNPACKED (1 << 26) 92#define RASTER_CTRL_TFT24 (1 << 25) 93#define RASTER_CTRL_STN565 (1 << 24) 94#define RASTER_CTRL_TFTPMAP (1 << 23) 95#define RASTER_CTRL_NIBMODE (1 << 22) 96#define RASTER_CTRL_PALMODE_SHIFT 20 97#define PALETTE_PALETTE_AND_DATA 0x00 98#define PALETTE_PALETTE_ONLY 0x01 99#define PALETTE_DATA_ONLY 0x02 100#define RASTER_CTRL_REQDLY_SHIFT 12 101#define RASTER_CTRL_MONO8B (1 << 9) 102#define RASTER_CTRL_RBORDER (1 << 8) 103#define RASTER_CTRL_LCDTFT (1 << 7) 104#define RASTER_CTRL_LCDBW (1 << 1) 105#define RASTER_CTRL_LCDEN (1 << 0) 106#define LCD_RASTER_TIMING_0 0x2C 107#define RASTER_TIMING_0_HBP_SHIFT 24 108#define RASTER_TIMING_0_HFP_SHIFT 16 109#define RASTER_TIMING_0_HSW_SHIFT 10 110#define RASTER_TIMING_0_PPLLSB_SHIFT 4 111#define RASTER_TIMING_0_PPLMSB_SHIFT 3 112#define LCD_RASTER_TIMING_1 0x30 113#define RASTER_TIMING_1_VBP_SHIFT 24 114#define RASTER_TIMING_1_VFP_SHIFT 16 115#define RASTER_TIMING_1_VSW_SHIFT 10 116#define RASTER_TIMING_1_LPP_SHIFT 0 117#define LCD_RASTER_TIMING_2 0x34 118#define RASTER_TIMING_2_HSWHI_SHIFT 27 119#define RASTER_TIMING_2_LPP_B10_SHIFT 26 120#define RASTER_TIMING_2_PHSVS (1 << 25) 121#define RASTER_TIMING_2_PHSVS_RISE (1 << 24) 122#define RASTER_TIMING_2_PHSVS_FALL (0 << 24) 123#define RASTER_TIMING_2_IOE (1 << 23) 124#define RASTER_TIMING_2_IPC (1 << 22) 125#define RASTER_TIMING_2_IHS (1 << 21) 126#define RASTER_TIMING_2_IVS (1 << 20) 127#define RASTER_TIMING_2_ACBI_SHIFT 16 128#define RASTER_TIMING_2_ACB_SHIFT 8 129#define RASTER_TIMING_2_HBPHI_SHIFT 4 130#define RASTER_TIMING_2_HFPHI_SHIFT 0 131#define LCD_RASTER_SUBPANEL 0x38 132#define LCD_RASTER_SUBPANEL2 0x3C 133#define LCD_LCDDMA_CTRL 0x40 134#define LCDDMA_CTRL_DMA_MASTER_PRIO_SHIFT 16 135#define LCDDMA_CTRL_TH_FIFO_RDY_SHIFT 8 136#define LCDDMA_CTRL_BURST_SIZE_SHIFT 4 137#define LCDDMA_CTRL_BYTES_SWAP (1 << 3) 138#define LCDDMA_CTRL_BE (1 << 1) 139#define LCDDMA_CTRL_FB0_ONLY 0 140#define LCDDMA_CTRL_FB0_FB1 (1 << 0) 141#define LCD_LCDDMA_FB0_BASE 0x44 142#define LCD_LCDDMA_FB0_CEILING 0x48 143#define LCD_LCDDMA_FB1_BASE 0x4C 144#define LCD_LCDDMA_FB1_CEILING 0x50 145#define LCD_SYSCONFIG 0x54 146#define SYSCONFIG_STANDBY_FORCE (0 << 4) 147#define SYSCONFIG_STANDBY_NONE (1 << 4) 148#define SYSCONFIG_STANDBY_SMART (2 << 4) 149#define SYSCONFIG_IDLE_FORCE (0 << 2) 150#define SYSCONFIG_IDLE_NONE (1 << 2) 151#define SYSCONFIG_IDLE_SMART (2 << 2) 152#define LCD_IRQSTATUS_RAW 0x58 153#define LCD_IRQSTATUS 0x5C 154#define LCD_IRQENABLE_SET 0x60 155#define LCD_IRQENABLE_CLEAR 0x64 156#define IRQ_EOF1 (1 << 9) 157#define IRQ_EOF0 (1 << 8) 158#define IRQ_PL (1 << 6) 159#define IRQ_FUF (1 << 5) 160#define IRQ_ACB (1 << 3) 161#define IRQ_SYNC_LOST (1 << 2) 162#define IRQ_RASTER_DONE (1 << 1) 163#define IRQ_FRAME_DONE (1 << 0) 164#define LCD_END_OF_INT_IND 0x68 165#define LCD_CLKC_ENABLE 0x6C 166#define CLKC_ENABLE_DMA (1 << 2) 167#define CLKC_ENABLE_LDID (1 << 1) 168#define CLKC_ENABLE_CORE (1 << 0) 169#define LCD_CLKC_RESET 0x70 170#define CLKC_RESET_MAIN (1 << 3) 171#define CLKC_RESET_DMA (1 << 2) 172#define CLKC_RESET_LDID (1 << 1) 173#define CLKC_RESET_CORE (1 << 0) 174 175#define LCD_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 176#define LCD_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 177#define LCD_LOCK_INIT(_sc) mtx_init(&(_sc)->sc_mtx, \ 178 device_get_nameunit(_sc->sc_dev), "am335x_lcd", MTX_DEF) 179#define LCD_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx); 180 181#define LCD_READ4(_sc, reg) bus_read_4((_sc)->sc_mem_res, reg); 182#define LCD_WRITE4(_sc, reg, value) \ 183 bus_write_4((_sc)->sc_mem_res, reg, value); 184 185/* Backlight is controlled by eCAS interface on PWM unit 0 */ 186#define PWM_UNIT 0 187#define PWM_PERIOD 100 188 189#define MODE_HBP(mode) ((mode)->htotal - (mode)->hsync_end) 190#define MODE_HFP(mode) ((mode)->hsync_start - (mode)->hdisplay) 191#define MODE_HSW(mode) ((mode)->hsync_end - (mode)->hsync_start) 192#define MODE_VBP(mode) ((mode)->vtotal - (mode)->vsync_end) 193#define MODE_VFP(mode) ((mode)->vsync_start - (mode)->vdisplay) 194#define MODE_VSW(mode) ((mode)->vsync_end - (mode)->vsync_start) 195 196#define MAX_PIXEL_CLOCK 126000 197#define MAX_BANDWIDTH (1280*1024*60) 198 199struct am335x_lcd_softc { 200 device_t sc_dev; 201 struct fb_info sc_fb_info; 202 struct resource *sc_mem_res; 203 struct resource *sc_irq_res; 204 void *sc_intr_hl; 205 struct mtx sc_mtx; 206 int sc_backlight; 207 struct sysctl_oid *sc_oid; 208 209 struct panel_info sc_panel; 210 211 /* Framebuffer */ 212 bus_dma_tag_t sc_dma_tag; 213 bus_dmamap_t sc_dma_map; 214 size_t sc_fb_size; 215 bus_addr_t sc_fb_phys; 216 uint8_t *sc_fb_base; 217 218 /* HDMI framer */ 219 phandle_t sc_hdmi_framer; 220 eventhandler_tag sc_hdmi_evh; 221}; 222 223static void 224am335x_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err) 225{ 226 bus_addr_t *addr; 227 228 if (err) 229 return; 230 231 addr = (bus_addr_t*)arg; 232 *addr = segs[0].ds_addr; 233} 234 235static uint32_t 236am335x_lcd_calc_divisor(uint32_t reference, uint32_t freq) 237{ 238 uint32_t div, i; 239 uint32_t delta, min_delta; 240 241 min_delta = freq; 242 div = 255; 243 244 /* Raster mode case: divisors are in range from 2 to 255 */ 245 for (i = 2; i < 255; i++) { 246 delta = abs(reference/i - freq); 247 if (delta < min_delta) { 248 div = i; 249 min_delta = delta; 250 } 251 } 252 253 return (div); 254} 255 256static int 257am335x_lcd_sysctl_backlight(SYSCTL_HANDLER_ARGS) 258{ 259 struct am335x_lcd_softc *sc = (struct am335x_lcd_softc*)arg1; 260 int error; 261 int backlight; 262 263 backlight = sc->sc_backlight; 264 error = sysctl_handle_int(oidp, &backlight, 0, req); 265 266 if (error != 0 || req->newptr == NULL) 267 return (error); 268 269 if (backlight < 0) 270 backlight = 0; 271 if (backlight > 100) 272 backlight = 100; 273 274 LCD_LOCK(sc); 275 error = am335x_pwm_config_ecap(PWM_UNIT, PWM_PERIOD, 276 backlight*PWM_PERIOD/100); 277 if (error == 0) 278 sc->sc_backlight = backlight; 279 LCD_UNLOCK(sc); 280 281 return (error); 282} 283 284static uint32_t 285am335x_mode_vrefresh(const struct videomode *mode) 286{ 287 uint32_t refresh; 288 289 /* Calculate vertical refresh rate */ 290 refresh = (mode->dot_clock * 1000 / mode->htotal); 291 refresh = (refresh + mode->vtotal / 2) / mode->vtotal; 292 293 if (mode->flags & VID_INTERLACE) 294 refresh *= 2; 295 if (mode->flags & VID_DBLSCAN) 296 refresh /= 2; 297 298 return refresh; 299} 300 301static int 302am335x_mode_is_valid(const struct videomode *mode) 303{ 304 uint32_t hbp, hfp, hsw; 305 uint32_t vbp, vfp, vsw; 306 307 if (mode->dot_clock > MAX_PIXEL_CLOCK) 308 return (0); 309 310 if (mode->hdisplay & 0xf) 311 return (0); 312 313 if (mode->vdisplay > 2048) 314 return (0); 315 316 /* Check ranges for timing parameters */ 317 hbp = MODE_HBP(mode) - 1; 318 hfp = MODE_HFP(mode) - 1; 319 hsw = MODE_HSW(mode) - 1; 320 vbp = MODE_VBP(mode); 321 vfp = MODE_VFP(mode); 322 vsw = MODE_VSW(mode) - 1; 323 324 if (hbp > 0x3ff) 325 return (0); 326 if (hfp > 0x3ff) 327 return (0); 328 if (hsw > 0x3ff) 329 return (0); 330 331 if (vbp > 0xff) 332 return (0); 333 if (vfp > 0xff) 334 return (0); 335 if (vsw > 0x3f) 336 return (0); 337 if (mode->vdisplay*mode->hdisplay*am335x_mode_vrefresh(mode) 338 > MAX_BANDWIDTH) 339 return (0); 340 341 return (1); 342} 343 344static void 345am335x_read_hdmi_property(device_t dev) 346{ 347 phandle_t node, xref; 348 phandle_t endpoint; 349 phandle_t hdmi_xref; 350 struct am335x_lcd_softc *sc; 351 352 sc = device_get_softc(dev); 353 node = ofw_bus_get_node(dev); 354 sc->sc_hdmi_framer = 0; 355 356 /* 357 * Old FreeBSD way of referencing to HDMI framer 358 */ 359 if (OF_getencprop(node, "hdmi", &hdmi_xref, sizeof(hdmi_xref)) != -1) { 360 sc->sc_hdmi_framer = hdmi_xref; 361 return; 362 } 363 364 /* 365 * Use bindings described in Linux docs: 366 * bindings/media/video-interfaces.txt 367 * We assume that the only endpoint in LCDC node 368 * is HDMI framer. 369 */ 370 node = ofw_bus_find_child(node, "port"); 371 372 /* No media bindings */ 373 if (node == 0) 374 return; 375 376 for (endpoint = OF_child(node); endpoint != 0; endpoint = OF_peer(endpoint)) { 377 if (OF_getencprop(endpoint, "remote-endpoint", &xref, sizeof(xref)) != -1) { 378 /* port/port@0/endpoint@0 */ 379 node = OF_node_from_xref(xref); 380 /* port/port@0 */ 381 node = OF_parent(node); 382 /* port */ 383 node = OF_parent(node); 384 /* actual owner of port, in our case HDMI framer */ 385 sc->sc_hdmi_framer = OF_xref_from_node(OF_parent(node)); 386 if (sc->sc_hdmi_framer != 0) 387 return; 388 } 389 } 390} 391 392static int 393am335x_read_property(device_t dev, phandle_t node, const char *name, uint32_t *val) 394{ 395 pcell_t cell; 396 397 if ((OF_getencprop(node, name, &cell, sizeof(cell))) <= 0) { 398 device_printf(dev, "missing '%s' attribute in LCD panel info\n", 399 name); 400 return (ENXIO); 401 } 402 403 *val = cell; 404 405 return (0); 406} 407 408static int 409am335x_read_timing(device_t dev, phandle_t node, struct panel_info *panel) 410{ 411 int error; 412 phandle_t timings_node, timing_node, native; 413 414 timings_node = ofw_bus_find_child(node, "display-timings"); 415 if (timings_node == 0) { 416 device_printf(dev, "no \"display-timings\" node\n"); 417 return (-1); 418 } 419 420 if (OF_searchencprop(timings_node, "native-mode", &native, 421 sizeof(native)) == -1) { 422 device_printf(dev, "no \"native-mode\" reference in \"timings\" node\n"); 423 return (-1); 424 } 425 426 timing_node = OF_node_from_xref(native); 427 428 error = 0; 429 if ((error = am335x_read_property(dev, timing_node, 430 "hactive", &panel->panel_width))) 431 goto out; 432 433 if ((error = am335x_read_property(dev, timing_node, 434 "vactive", &panel->panel_height))) 435 goto out; 436 437 if ((error = am335x_read_property(dev, timing_node, 438 "hfront-porch", &panel->panel_hfp))) 439 goto out; 440 441 if ((error = am335x_read_property(dev, timing_node, 442 "hback-porch", &panel->panel_hbp))) 443 goto out; 444 445 if ((error = am335x_read_property(dev, timing_node, 446 "hsync-len", &panel->panel_hsw))) 447 goto out; 448 449 if ((error = am335x_read_property(dev, timing_node, 450 "vfront-porch", &panel->panel_vfp))) 451 goto out; 452 453 if ((error = am335x_read_property(dev, timing_node, 454 "vback-porch", &panel->panel_vbp))) 455 goto out; 456 457 if ((error = am335x_read_property(dev, timing_node, 458 "vsync-len", &panel->panel_vsw))) 459 goto out; 460 461 if ((error = am335x_read_property(dev, timing_node, 462 "clock-frequency", &panel->panel_pxl_clk))) 463 goto out; 464 465 if ((error = am335x_read_property(dev, timing_node, 466 "pixelclk-active", &panel->pixelclk_active))) 467 goto out; 468 469 if ((error = am335x_read_property(dev, timing_node, 470 "hsync-active", &panel->hsync_active))) 471 goto out; 472 473 if ((error = am335x_read_property(dev, timing_node, 474 "vsync-active", &panel->vsync_active))) 475 goto out; 476 477out: 478 return (error); 479} 480 481static int 482am335x_read_panel_info(device_t dev, phandle_t node, struct panel_info *panel) 483{ 484 phandle_t panel_info_node; 485 486 panel_info_node = ofw_bus_find_child(node, "panel-info"); 487 if (panel_info_node == 0) 488 return (-1); 489 490 am335x_read_property(dev, panel_info_node, 491 "ac-bias", &panel->ac_bias); 492 493 am335x_read_property(dev, panel_info_node, 494 "ac-bias-intrpt", &panel->ac_bias_intrpt); 495 496 am335x_read_property(dev, panel_info_node, 497 "dma-burst-sz", &panel->dma_burst_sz); 498 499 am335x_read_property(dev, panel_info_node, 500 "bpp", &panel->bpp); 501 502 am335x_read_property(dev, panel_info_node, 503 "fdd", &panel->fdd); 504 505 am335x_read_property(dev, panel_info_node, 506 "sync-edge", &panel->sync_edge); 507 508 am335x_read_property(dev, panel_info_node, 509 "sync-ctrl", &panel->sync_ctrl); 510 511 return (0); 512} 513 514static void 515am335x_lcd_intr(void *arg) 516{ 517 struct am335x_lcd_softc *sc = arg; 518 uint32_t reg; 519 520 reg = LCD_READ4(sc, LCD_IRQSTATUS); 521 LCD_WRITE4(sc, LCD_IRQSTATUS, reg); 522 /* Read value back to make sure it reached the hardware */ 523 reg = LCD_READ4(sc, LCD_IRQSTATUS); 524 525 if (reg & IRQ_SYNC_LOST) { 526 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 527 reg &= ~RASTER_CTRL_LCDEN; 528 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 529 530 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 531 reg |= RASTER_CTRL_LCDEN; 532 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 533 goto done; 534 } 535 536 if (reg & IRQ_PL) { 537 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 538 reg &= ~RASTER_CTRL_LCDEN; 539 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 540 541 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 542 reg |= RASTER_CTRL_LCDEN; 543 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 544 goto done; 545 } 546 547 if (reg & IRQ_EOF0) { 548 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 549 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 550 reg &= ~IRQ_EOF0; 551 } 552 553 if (reg & IRQ_EOF1) { 554 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 555 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 556 reg &= ~IRQ_EOF1; 557 } 558 559 if (reg & IRQ_FUF) { 560 /* TODO: Handle FUF */ 561 } 562 563 if (reg & IRQ_ACB) { 564 /* TODO: Handle ACB */ 565 } 566 567done: 568 LCD_WRITE4(sc, LCD_END_OF_INT_IND, 0); 569 /* Read value back to make sure it reached the hardware */ 570 reg = LCD_READ4(sc, LCD_END_OF_INT_IND); 571} 572 573static const struct videomode * 574am335x_lcd_pick_mode(struct edid_info *ei) 575{ 576 const struct videomode *videomode; 577 const struct videomode *m; 578 int n; 579 580 /* Get standard VGA as default */ 581 videomode = NULL; 582 583 /* 584 * Pick a mode. 585 */ 586 if (ei->edid_preferred_mode != NULL) { 587 if (am335x_mode_is_valid(ei->edid_preferred_mode)) 588 videomode = ei->edid_preferred_mode; 589 } 590 591 if (videomode == NULL) { 592 m = ei->edid_modes; 593 594 sort_modes(ei->edid_modes, 595 &ei->edid_preferred_mode, 596 ei->edid_nmodes); 597 for (n = 0; n < ei->edid_nmodes; n++) 598 if (am335x_mode_is_valid(&m[n])) { 599 videomode = &m[n]; 600 break; 601 } 602 } 603 604 return videomode; 605} 606 607static int 608am335x_lcd_configure(struct am335x_lcd_softc *sc) 609{ 610 int div; 611 uint32_t reg, timing0, timing1, timing2; 612 uint32_t burst_log; 613 size_t dma_size; 614 uint32_t hbp, hfp, hsw; 615 uint32_t vbp, vfp, vsw; 616 uint32_t width, height; 617 unsigned int ref_freq; 618 int err; 619 620 /* 621 * try to adjust clock to get double of requested frequency 622 * HDMI/DVI displays are very sensitive to error in frequncy value 623 */ 624 if (ti_prcm_clk_set_source_freq(LCDC_CLK, sc->sc_panel.panel_pxl_clk*2)) { 625 device_printf(sc->sc_dev, "can't set source frequency\n"); 626 return (ENXIO); 627 } 628 629 if (ti_prcm_clk_get_source_freq(LCDC_CLK, &ref_freq)) { 630 device_printf(sc->sc_dev, "can't get reference frequency\n"); 631 return (ENXIO); 632 } 633 634 /* Panle initialization */ 635 dma_size = round_page(sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8); 636 637 /* 638 * Now allocate framebuffer memory 639 */ 640 err = bus_dma_tag_create( 641 bus_get_dma_tag(sc->sc_dev), 642 4, 0, /* alignment, boundary */ 643 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 644 BUS_SPACE_MAXADDR, /* highaddr */ 645 NULL, NULL, /* filter, filterarg */ 646 dma_size, 1, /* maxsize, nsegments */ 647 dma_size, 0, /* maxsegsize, flags */ 648 NULL, NULL, /* lockfunc, lockarg */ 649 &sc->sc_dma_tag); 650 if (err) 651 goto done; 652 653 err = bus_dmamem_alloc(sc->sc_dma_tag, (void **)&sc->sc_fb_base, 654 BUS_DMA_COHERENT, &sc->sc_dma_map); 655 656 if (err) { 657 device_printf(sc->sc_dev, "cannot allocate framebuffer\n"); 658 goto done; 659 } 660 661 err = bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map, sc->sc_fb_base, 662 dma_size, am335x_fb_dmamap_cb, &sc->sc_fb_phys, BUS_DMA_NOWAIT); 663 664 if (err) { 665 device_printf(sc->sc_dev, "cannot load DMA map\n"); 666 goto done; 667 } 668 669 /* Make sure it's blank */ 670 memset(sc->sc_fb_base, 0x0, dma_size); 671 672 /* Calculate actual FB Size */ 673 sc->sc_fb_size = sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8; 674 675 /* Only raster mode is supported */ 676 reg = CTRL_RASTER_MODE; 677 div = am335x_lcd_calc_divisor(ref_freq, sc->sc_panel.panel_pxl_clk); 678 reg |= (div << CTRL_DIV_SHIFT); 679 LCD_WRITE4(sc, LCD_CTRL, reg); 680 681 /* Set timing */ 682 timing0 = timing1 = timing2 = 0; 683 684 hbp = sc->sc_panel.panel_hbp - 1; 685 hfp = sc->sc_panel.panel_hfp - 1; 686 hsw = sc->sc_panel.panel_hsw - 1; 687 688 vbp = sc->sc_panel.panel_vbp; 689 vfp = sc->sc_panel.panel_vfp; 690 vsw = sc->sc_panel.panel_vsw - 1; 691 692 height = sc->sc_panel.panel_height - 1; 693 width = sc->sc_panel.panel_width - 1; 694 695 /* Horizontal back porch */ 696 timing0 |= (hbp & 0xff) << RASTER_TIMING_0_HBP_SHIFT; 697 timing2 |= ((hbp >> 8) & 3) << RASTER_TIMING_2_HBPHI_SHIFT; 698 /* Horizontal front porch */ 699 timing0 |= (hfp & 0xff) << RASTER_TIMING_0_HFP_SHIFT; 700 timing2 |= ((hfp >> 8) & 3) << RASTER_TIMING_2_HFPHI_SHIFT; 701 /* Horizontal sync width */ 702 timing0 |= (hsw & 0x3f) << RASTER_TIMING_0_HSW_SHIFT; 703 timing2 |= ((hsw >> 6) & 0xf) << RASTER_TIMING_2_HSWHI_SHIFT; 704 705 /* Vertical back porch, front porch, sync width */ 706 timing1 |= (vbp & 0xff) << RASTER_TIMING_1_VBP_SHIFT; 707 timing1 |= (vfp & 0xff) << RASTER_TIMING_1_VFP_SHIFT; 708 timing1 |= (vsw & 0x3f) << RASTER_TIMING_1_VSW_SHIFT; 709 710 /* Pixels per line */ 711 timing0 |= ((width >> 10) & 1) 712 << RASTER_TIMING_0_PPLMSB_SHIFT; 713 timing0 |= ((width >> 4) & 0x3f) 714 << RASTER_TIMING_0_PPLLSB_SHIFT; 715 716 /* Lines per panel */ 717 timing1 |= (height & 0x3ff) 718 << RASTER_TIMING_1_LPP_SHIFT; 719 timing2 |= ((height >> 10 ) & 1) 720 << RASTER_TIMING_2_LPP_B10_SHIFT; 721 722 /* clock signal settings */ 723 if (sc->sc_panel.sync_ctrl) 724 timing2 |= RASTER_TIMING_2_PHSVS; 725 if (sc->sc_panel.sync_edge) 726 timing2 |= RASTER_TIMING_2_PHSVS_RISE; 727 else 728 timing2 |= RASTER_TIMING_2_PHSVS_FALL; 729 if (sc->sc_panel.hsync_active == 0) 730 timing2 |= RASTER_TIMING_2_IHS; 731 if (sc->sc_panel.vsync_active == 0) 732 timing2 |= RASTER_TIMING_2_IVS; 733 if (sc->sc_panel.pixelclk_active == 0) 734 timing2 |= RASTER_TIMING_2_IPC; 735 736 /* AC bias */ 737 timing2 |= (sc->sc_panel.ac_bias << RASTER_TIMING_2_ACB_SHIFT); 738 timing2 |= (sc->sc_panel.ac_bias_intrpt << RASTER_TIMING_2_ACBI_SHIFT); 739 740 LCD_WRITE4(sc, LCD_RASTER_TIMING_0, timing0); 741 LCD_WRITE4(sc, LCD_RASTER_TIMING_1, timing1); 742 LCD_WRITE4(sc, LCD_RASTER_TIMING_2, timing2); 743 744 /* DMA settings */ 745 reg = LCDDMA_CTRL_FB0_FB1; 746 /* Find power of 2 for current burst size */ 747 switch (sc->sc_panel.dma_burst_sz) { 748 case 1: 749 burst_log = 0; 750 break; 751 case 2: 752 burst_log = 1; 753 break; 754 case 4: 755 burst_log = 2; 756 break; 757 case 8: 758 burst_log = 3; 759 break; 760 case 16: 761 default: 762 burst_log = 4; 763 break; 764 } 765 reg |= (burst_log << LCDDMA_CTRL_BURST_SIZE_SHIFT); 766 /* XXX: FIFO TH */ 767 reg |= (0 << LCDDMA_CTRL_TH_FIFO_RDY_SHIFT); 768 LCD_WRITE4(sc, LCD_LCDDMA_CTRL, reg); 769 770 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 771 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 772 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 773 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 774 775 /* Enable LCD */ 776 reg = RASTER_CTRL_LCDTFT; 777 reg |= (sc->sc_panel.fdd << RASTER_CTRL_REQDLY_SHIFT); 778 reg |= (PALETTE_DATA_ONLY << RASTER_CTRL_PALMODE_SHIFT); 779 if (sc->sc_panel.bpp >= 24) 780 reg |= RASTER_CTRL_TFT24; 781 if (sc->sc_panel.bpp == 32) 782 reg |= RASTER_CTRL_TFT24_UNPACKED; 783 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 784 785 LCD_WRITE4(sc, LCD_CLKC_ENABLE, 786 CLKC_ENABLE_DMA | CLKC_ENABLE_LDID | CLKC_ENABLE_CORE); 787 788 LCD_WRITE4(sc, LCD_CLKC_RESET, CLKC_RESET_MAIN); 789 DELAY(100); 790 LCD_WRITE4(sc, LCD_CLKC_RESET, 0); 791 792 reg = IRQ_EOF1 | IRQ_EOF0 | IRQ_FUF | IRQ_PL | 793 IRQ_ACB | IRQ_SYNC_LOST | IRQ_RASTER_DONE | 794 IRQ_FRAME_DONE; 795 LCD_WRITE4(sc, LCD_IRQENABLE_SET, reg); 796 797 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 798 reg |= RASTER_CTRL_LCDEN; 799 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 800 801 LCD_WRITE4(sc, LCD_SYSCONFIG, 802 SYSCONFIG_STANDBY_SMART | SYSCONFIG_IDLE_SMART); 803 804 sc->sc_fb_info.fb_name = device_get_nameunit(sc->sc_dev); 805 sc->sc_fb_info.fb_vbase = (intptr_t)sc->sc_fb_base; 806 sc->sc_fb_info.fb_pbase = sc->sc_fb_phys; 807 sc->sc_fb_info.fb_size = sc->sc_fb_size; 808 sc->sc_fb_info.fb_bpp = sc->sc_fb_info.fb_depth = sc->sc_panel.bpp; 809 sc->sc_fb_info.fb_stride = sc->sc_panel.panel_width*sc->sc_panel.bpp / 8; 810 sc->sc_fb_info.fb_width = sc->sc_panel.panel_width; 811 sc->sc_fb_info.fb_height = sc->sc_panel.panel_height; 812 813#ifdef DEV_SC 814 err = (sc_attach_unit(device_get_unit(sc->sc_dev), 815 device_get_flags(sc->sc_dev) | SC_AUTODETECT_KBD)); 816 817 if (err) { 818 device_printf(sc->sc_dev, "failed to attach syscons\n"); 819 goto fail; 820 } 821 822 am335x_lcd_syscons_setup((vm_offset_t)sc->sc_fb_base, sc->sc_fb_phys, &panel); 823#else /* VT */ 824 device_t fbd = device_add_child(sc->sc_dev, "fbd", 825 device_get_unit(sc->sc_dev)); 826 if (fbd != NULL) { 827 if (device_probe_and_attach(fbd) != 0) 828 device_printf(sc->sc_dev, "failed to attach fbd device\n"); 829 } else 830 device_printf(sc->sc_dev, "failed to add fbd child\n"); 831#endif 832 833done: 834 return (err); 835} 836 837static void 838am335x_lcd_hdmi_event(void *arg, device_t hdmi, int event) 839{ 840 struct am335x_lcd_softc *sc; 841 const struct videomode *videomode; 842 struct videomode hdmi_mode; 843 device_t hdmi_dev; 844 uint8_t *edid; 845 uint32_t edid_len; 846 struct edid_info ei; 847 848 sc = arg; 849 850 /* Nothing to work with */ 851 if (!sc->sc_hdmi_framer) { 852 device_printf(sc->sc_dev, "HDMI event without HDMI framer set\n"); 853 return; 854 } 855 856 hdmi_dev = OF_device_from_xref(sc->sc_hdmi_framer); 857 if (!hdmi_dev) { 858 device_printf(sc->sc_dev, "no actual device for \"hdmi\" property\n"); 859 return; 860 } 861 862 edid = NULL; 863 edid_len = 0; 864 if (HDMI_GET_EDID(hdmi_dev, &edid, &edid_len) != 0) { 865 device_printf(sc->sc_dev, "failed to get EDID info from HDMI framer\n"); 866 return; 867 } 868 869 videomode = NULL; 870 871 if (edid_parse(edid, &ei) == 0) { 872 edid_print(&ei); 873 videomode = am335x_lcd_pick_mode(&ei); 874 } else 875 device_printf(sc->sc_dev, "failed to parse EDID\n"); 876 877 /* Use standard VGA as fallback */ 878 if (videomode == NULL) 879 videomode = pick_mode_by_ref(640, 480, 60); 880 881 if (videomode == NULL) { 882 device_printf(sc->sc_dev, "failed to find usable videomode"); 883 return; 884 } 885 886 device_printf(sc->sc_dev, "detected videomode: %dx%d @ %dKHz\n", videomode->hdisplay, 887 videomode->vdisplay, am335x_mode_vrefresh(videomode)); 888 889 sc->sc_panel.panel_width = videomode->hdisplay; 890 sc->sc_panel.panel_height = videomode->vdisplay; 891 sc->sc_panel.panel_hfp = videomode->hsync_start - videomode->hdisplay; 892 sc->sc_panel.panel_hbp = videomode->htotal - videomode->hsync_end; 893 sc->sc_panel.panel_hsw = videomode->hsync_end - videomode->hsync_start; 894 sc->sc_panel.panel_vfp = videomode->vsync_start - videomode->vdisplay; 895 sc->sc_panel.panel_vbp = videomode->vtotal - videomode->vsync_end; 896 sc->sc_panel.panel_vsw = videomode->vsync_end - videomode->vsync_start; 897 sc->sc_panel.pixelclk_active = 1; 898 899 /* logic for HSYNC should be reversed */ 900 if (videomode->flags & VID_NHSYNC) 901 sc->sc_panel.hsync_active = 1; 902 else 903 sc->sc_panel.hsync_active = 0; 904 905 if (videomode->flags & VID_NVSYNC) 906 sc->sc_panel.vsync_active = 0; 907 else 908 sc->sc_panel.vsync_active = 1; 909 910 sc->sc_panel.panel_pxl_clk = videomode->dot_clock * 1000; 911 912 am335x_lcd_configure(sc); 913 914 memcpy(&hdmi_mode, videomode, sizeof(hdmi_mode)); 915 hdmi_mode.hskew = videomode->hsync_end - videomode->hsync_start; 916 hdmi_mode.flags |= VID_HSKEW; 917 918 HDMI_SET_VIDEOMODE(hdmi_dev, &hdmi_mode); 919} 920 921static int 922am335x_lcd_probe(device_t dev) 923{ 924#ifdef DEV_SC 925 int err; 926#endif 927 928 if (!ofw_bus_status_okay(dev)) 929 return (ENXIO); 930 931 if (!ofw_bus_is_compatible(dev, "ti,am33xx-tilcdc")) 932 return (ENXIO); 933 934 device_set_desc(dev, "AM335x LCD controller"); 935 936#ifdef DEV_SC 937 err = sc_probe_unit(device_get_unit(dev), 938 device_get_flags(dev) | SC_AUTODETECT_KBD); 939 if (err != 0) 940 return (err); 941#endif 942 943 return (BUS_PROBE_DEFAULT); 944} 945 946static int 947am335x_lcd_attach(device_t dev) 948{ 949 struct am335x_lcd_softc *sc; 950 951 int err; 952 int rid; 953 struct sysctl_ctx_list *ctx; 954 struct sysctl_oid *tree; 955 phandle_t root, panel_node; 956 957 err = 0; 958 sc = device_get_softc(dev); 959 sc->sc_dev = dev; 960 961 am335x_read_hdmi_property(dev); 962 963 root = OF_finddevice("/"); 964 if (root == -1) { 965 device_printf(dev, "failed to get FDT root node\n"); 966 return (ENXIO); 967 } 968 969 sc->sc_panel.ac_bias = 255; 970 sc->sc_panel.ac_bias_intrpt = 0; 971 sc->sc_panel.dma_burst_sz = 16; 972 sc->sc_panel.bpp = 16; 973 sc->sc_panel.fdd = 128; 974 sc->sc_panel.sync_edge = 0; 975 sc->sc_panel.sync_ctrl = 1; 976 977 panel_node = fdt_find_compatible(root, "ti,tilcdc,panel", 1); 978 if (panel_node != 0) { 979 device_printf(dev, "using static panel info\n"); 980 if (am335x_read_panel_info(dev, panel_node, &sc->sc_panel)) { 981 device_printf(dev, "failed to read panel info\n"); 982 return (ENXIO); 983 } 984 985 if (am335x_read_timing(dev, panel_node, &sc->sc_panel)) { 986 device_printf(dev, "failed to read timings\n"); 987 return (ENXIO); 988 } 989 } 990 991 ti_prcm_clk_enable(LCDC_CLK); 992 993 rid = 0; 994 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 995 RF_ACTIVE); 996 if (!sc->sc_mem_res) { 997 device_printf(dev, "cannot allocate memory window\n"); 998 return (ENXIO); 999 } 1000 1001 rid = 0; 1002 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1003 RF_ACTIVE); 1004 if (!sc->sc_irq_res) { 1005 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 1006 device_printf(dev, "cannot allocate interrupt\n"); 1007 return (ENXIO); 1008 } 1009 1010 if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE, 1011 NULL, am335x_lcd_intr, sc, 1012 &sc->sc_intr_hl) != 0) { 1013 bus_release_resource(dev, SYS_RES_IRQ, rid, 1014 sc->sc_irq_res); 1015 bus_release_resource(dev, SYS_RES_MEMORY, rid, 1016 sc->sc_mem_res); 1017 device_printf(dev, "Unable to setup the irq handler.\n"); 1018 return (ENXIO); 1019 } 1020 1021 LCD_LOCK_INIT(sc); 1022 1023 /* Init backlight interface */ 1024 ctx = device_get_sysctl_ctx(sc->sc_dev); 1025 tree = device_get_sysctl_tree(sc->sc_dev); 1026 sc->sc_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1027 "backlight", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1028 am335x_lcd_sysctl_backlight, "I", "LCD backlight"); 1029 sc->sc_backlight = 0; 1030 /* Check if eCAS interface is available at this point */ 1031 if (am335x_pwm_config_ecap(PWM_UNIT, 1032 PWM_PERIOD, PWM_PERIOD) == 0) 1033 sc->sc_backlight = 100; 1034 1035 if (panel_node != 0) 1036 am335x_lcd_configure(sc); 1037 else 1038 sc->sc_hdmi_evh = EVENTHANDLER_REGISTER(hdmi_event, 1039 am335x_lcd_hdmi_event, sc, EVENTHANDLER_PRI_ANY); 1040 1041 return (0); 1042} 1043 1044static int 1045am335x_lcd_detach(device_t dev) 1046{ 1047 /* Do not let unload driver */ 1048 return (EBUSY); 1049} 1050 1051static struct fb_info * 1052am335x_lcd_fb_getinfo(device_t dev) 1053{ 1054 struct am335x_lcd_softc *sc; 1055 1056 sc = device_get_softc(dev); 1057 1058 return (&sc->sc_fb_info); 1059} 1060 1061static device_method_t am335x_lcd_methods[] = { 1062 DEVMETHOD(device_probe, am335x_lcd_probe), 1063 DEVMETHOD(device_attach, am335x_lcd_attach), 1064 DEVMETHOD(device_detach, am335x_lcd_detach), 1065 1066 /* Framebuffer service methods */ 1067 DEVMETHOD(fb_getinfo, am335x_lcd_fb_getinfo), 1068 1069 DEVMETHOD_END 1070}; 1071 1072static driver_t am335x_lcd_driver = { 1073 "fb", 1074 am335x_lcd_methods, 1075 sizeof(struct am335x_lcd_softc), 1076}; 1077 1078static devclass_t am335x_lcd_devclass; 1079 1080DRIVER_MODULE(am335x_lcd, simplebus, am335x_lcd_driver, am335x_lcd_devclass, 0, 0); 1081MODULE_VERSION(am335x_lcd, 1); 1082MODULE_DEPEND(am335x_lcd, simplebus, 1, 1, 1); 1083