1/*
2 * Device Tree Include file for Marvell Armada 398 Development Board
3 *
4 * Copyright (C) 2015 Marvell
5 *
6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
7 *
8 * This file is dual-licensed: you can use it either under the terms
9 * of the GPL or the X11 license, at your option. Note that this dual
10 * licensing only applies to this file, and not this project as a
11 * whole.
12 *
13 *  a) This file is free software; you can redistribute it and/or
14 *     modify it under the terms of the GNU General Public License as
15 *     published by the Free Software Foundation; either version 2 of the
16 *     License, or (at your option) any later version.
17 *
18 *     This file is distributed in the hope that it will be useful
19 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
20 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21 *     GNU General Public License for more details.
22 *
23 * Or, alternatively
24 *
25 *  b) Permission is hereby granted, free of charge, to any person
26 *     obtaining a copy of this software and associated documentation
27 *     files (the "Software"), to deal in the Software without
28 *     restriction, including without limitation the rights to use
29 *     copy, modify, merge, publish, distribute, sublicense, and/or
30 *     sell copies of the Software, and to permit persons to whom the
31 *     Software is furnished to do so, subject to the following
32 *     conditions:
33 *
34 *     The above copyright notice and this permission notice shall be
35 *     included in all copies or substantial portions of the Software.
36 *
37 *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
38 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
39 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
40 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
41 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
42 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
43 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
44 *     OTHER DEALINGS IN THE SOFTWARE.
45 */
46
47/dts-v1/;
48#include "armada-398.dtsi"
49
50/ {
51	model = "Marvell Armada 398 Development Board";
52	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
53
54	chosen {
55		stdout-path = "serial0:115200n8";
56	};
57
58	memory {
59		device_type = "memory";
60		reg = <0x00000000 0x80000000>; /* 2 GB */
61	};
62
63	soc {
64		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
65			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
66
67		internal-regs {
68			spi@10680 {
69				status = "okay";
70				pinctrl-0 = <&spi1_pins>;
71				pinctrl-names = "default";
72
73				spi-flash@0 {
74					#address-cells = <1>;
75					#size-cells = <0>;
76					compatible = "n25q128a13", "jedec,spi-nor";
77					reg = <0>;
78					spi-max-frequency = <108000000>;
79
80					partition@0 {
81						label = "U-Boot";
82						reg = <0 0x400000>;
83					};
84
85					partition@400000 {
86						label = "Filesystem";
87						reg = <0x400000 0x1000000>;
88					};
89				};
90			};
91
92			i2c@11000 {
93				pinctrl-0 = <&i2c0_pins>;
94				pinctrl-names = "default";
95				status = "okay";
96				clock-frequency = <100000>;
97			};
98
99			serial@12000 {
100				pinctrl-0 = <&uart0_pins>;
101				pinctrl-names = "default";
102				status = "okay";
103			};
104
105			serial@12100 {
106				pinctrl-0 = <&uart1_pins>;
107				pinctrl-names = "default";
108				status = "okay";
109			};
110
111			flash@d0000 {
112				status = "okay";
113				pinctrl-0 = <&nand_pins>;
114				pinctrl-names = "default";
115				num-cs = <1>;
116				marvell,nand-keep-config;
117				marvell,nand-enable-arbiter;
118				nand-on-flash-bbt;
119				nand-ecc-strength = <8>;
120				nand-ecc-step-size = <512>;
121
122				partition@0 {
123					label = "U-Boot";
124					reg = <0 0x800000>;
125				};
126				partition@800000 {
127					label = "Linux";
128					reg = <0x800000 0x800000>;
129				};
130				partition@1000000 {
131					label = "Filesystem";
132					reg = <0x1000000 0x3f000000>;
133				};
134			};
135		};
136
137		pcie-controller {
138			status = "okay";
139
140			pcie@1,0 {
141				status = "okay";
142			};
143
144			pcie@2,0 {
145				status = "okay";
146			};
147
148			pcie@3,0 {
149				status = "okay";
150			};
151		};
152	};
153};
154