if_wb.c revision 134442
1/* 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/pci/if_wb.c 134442 2004-08-28 15:10:35Z rwatson $"); 35 36/* 37 * Winbond fast ethernet PCI NIC driver 38 * 39 * Supports various cheap network adapters based on the Winbond W89C840F 40 * fast ethernet controller chip. This includes adapters manufactured by 41 * Winbond itself and some made by Linksys. 42 * 43 * Written by Bill Paul <wpaul@ctr.columbia.edu> 44 * Electrical Engineering Department 45 * Columbia University, New York City 46 */ 47/* 48 * The Winbond W89C840F chip is a bus master; in some ways it resembles 49 * a DEC 'tulip' chip, only not as complicated. Unfortunately, it has 50 * one major difference which is that while the registers do many of 51 * the same things as a tulip adapter, the offsets are different: where 52 * tulip registers are typically spaced 8 bytes apart, the Winbond 53 * registers are spaced 4 bytes apart. The receiver filter is also 54 * programmed differently. 55 * 56 * Like the tulip, the Winbond chip uses small descriptors containing 57 * a status word, a control word and 32-bit areas that can either be used 58 * to point to two external data blocks, or to point to a single block 59 * and another descriptor in a linked list. Descriptors can be grouped 60 * together in blocks to form fixed length rings or can be chained 61 * together in linked lists. A single packet may be spread out over 62 * several descriptors if necessary. 63 * 64 * For the receive ring, this driver uses a linked list of descriptors, 65 * each pointing to a single mbuf cluster buffer, which us large enough 66 * to hold an entire packet. The link list is looped back to created a 67 * closed ring. 68 * 69 * For transmission, the driver creates a linked list of 'super descriptors' 70 * which each contain several individual descriptors linked toghether. 71 * Each 'super descriptor' contains WB_MAXFRAGS descriptors, which we 72 * abuse as fragment pointers. This allows us to use a buffer managment 73 * scheme very similar to that used in the ThunderLAN and Etherlink XL 74 * drivers. 75 * 76 * Autonegotiation is performed using the external PHY via the MII bus. 77 * The sample boards I have all use a Davicom PHY. 78 * 79 * Note: the author of the Linux driver for the Winbond chip alludes 80 * to some sort of flaw in the chip's design that seems to mandate some 81 * drastic workaround which signigicantly impairs transmit performance. 82 * I have no idea what he's on about: transmit performance with all 83 * three of my test boards seems fine. 84 */ 85 86#include "opt_bdg.h" 87 88#include <sys/param.h> 89#include <sys/systm.h> 90#include <sys/sockio.h> 91#include <sys/mbuf.h> 92#include <sys/malloc.h> 93#include <sys/module.h> 94#include <sys/kernel.h> 95#include <sys/socket.h> 96#include <sys/queue.h> 97 98#include <net/if.h> 99#include <net/if_arp.h> 100#include <net/ethernet.h> 101#include <net/if_dl.h> 102#include <net/if_media.h> 103 104#include <net/bpf.h> 105 106#include <vm/vm.h> /* for vtophys */ 107#include <vm/pmap.h> /* for vtophys */ 108#include <machine/bus_memio.h> 109#include <machine/bus_pio.h> 110#include <machine/bus.h> 111#include <machine/resource.h> 112#include <sys/bus.h> 113#include <sys/rman.h> 114 115#include <dev/pci/pcireg.h> 116#include <dev/pci/pcivar.h> 117 118#include <dev/mii/mii.h> 119#include <dev/mii/miivar.h> 120 121/* "controller miibus0" required. See GENERIC if you get errors here. */ 122#include "miibus_if.h" 123 124#define WB_USEIOSPACE 125 126#include <pci/if_wbreg.h> 127 128MODULE_DEPEND(wb, pci, 1, 1, 1); 129MODULE_DEPEND(wb, ether, 1, 1, 1); 130MODULE_DEPEND(wb, miibus, 1, 1, 1); 131 132/* 133 * Various supported device vendors/types and their names. 134 */ 135static struct wb_type wb_devs[] = { 136 { WB_VENDORID, WB_DEVICEID_840F, 137 "Winbond W89C840F 10/100BaseTX" }, 138 { CP_VENDORID, CP_DEVICEID_RL100, 139 "Compex RL100-ATX 10/100baseTX" }, 140 { 0, 0, NULL } 141}; 142 143static int wb_probe (device_t); 144static int wb_attach (device_t); 145static int wb_detach (device_t); 146 147static void wb_bfree (void *addr, void *args); 148static int wb_newbuf (struct wb_softc *, 149 struct wb_chain_onefrag *, 150 struct mbuf *); 151static int wb_encap (struct wb_softc *, struct wb_chain *, 152 struct mbuf *); 153 154static void wb_rxeof (struct wb_softc *); 155static void wb_rxeoc (struct wb_softc *); 156static void wb_txeof (struct wb_softc *); 157static void wb_txeoc (struct wb_softc *); 158static void wb_intr (void *); 159static void wb_tick (void *); 160static void wb_start (struct ifnet *); 161static int wb_ioctl (struct ifnet *, u_long, caddr_t); 162static void wb_init (void *); 163static void wb_stop (struct wb_softc *); 164static void wb_watchdog (struct ifnet *); 165static void wb_shutdown (device_t); 166static int wb_ifmedia_upd (struct ifnet *); 167static void wb_ifmedia_sts (struct ifnet *, struct ifmediareq *); 168 169static void wb_eeprom_putbyte (struct wb_softc *, int); 170static void wb_eeprom_getword (struct wb_softc *, int, u_int16_t *); 171static void wb_read_eeprom (struct wb_softc *, caddr_t, int, int, int); 172static void wb_mii_sync (struct wb_softc *); 173static void wb_mii_send (struct wb_softc *, u_int32_t, int); 174static int wb_mii_readreg (struct wb_softc *, struct wb_mii_frame *); 175static int wb_mii_writereg (struct wb_softc *, struct wb_mii_frame *); 176 177static void wb_setcfg (struct wb_softc *, u_int32_t); 178static void wb_setmulti (struct wb_softc *); 179static void wb_reset (struct wb_softc *); 180static void wb_fixmedia (struct wb_softc *); 181static int wb_list_rx_init (struct wb_softc *); 182static int wb_list_tx_init (struct wb_softc *); 183 184static int wb_miibus_readreg (device_t, int, int); 185static int wb_miibus_writereg (device_t, int, int, int); 186static void wb_miibus_statchg (device_t); 187 188#ifdef WB_USEIOSPACE 189#define WB_RES SYS_RES_IOPORT 190#define WB_RID WB_PCI_LOIO 191#else 192#define WB_RES SYS_RES_MEMORY 193#define WB_RID WB_PCI_LOMEM 194#endif 195 196static device_method_t wb_methods[] = { 197 /* Device interface */ 198 DEVMETHOD(device_probe, wb_probe), 199 DEVMETHOD(device_attach, wb_attach), 200 DEVMETHOD(device_detach, wb_detach), 201 DEVMETHOD(device_shutdown, wb_shutdown), 202 203 /* bus interface, for miibus */ 204 DEVMETHOD(bus_print_child, bus_generic_print_child), 205 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 206 207 /* MII interface */ 208 DEVMETHOD(miibus_readreg, wb_miibus_readreg), 209 DEVMETHOD(miibus_writereg, wb_miibus_writereg), 210 DEVMETHOD(miibus_statchg, wb_miibus_statchg), 211 { 0, 0 } 212}; 213 214static driver_t wb_driver = { 215 "wb", 216 wb_methods, 217 sizeof(struct wb_softc) 218}; 219 220static devclass_t wb_devclass; 221 222DRIVER_MODULE(wb, pci, wb_driver, wb_devclass, 0, 0); 223DRIVER_MODULE(miibus, wb, miibus_driver, miibus_devclass, 0, 0); 224 225#define WB_SETBIT(sc, reg, x) \ 226 CSR_WRITE_4(sc, reg, \ 227 CSR_READ_4(sc, reg) | (x)) 228 229#define WB_CLRBIT(sc, reg, x) \ 230 CSR_WRITE_4(sc, reg, \ 231 CSR_READ_4(sc, reg) & ~(x)) 232 233#define SIO_SET(x) \ 234 CSR_WRITE_4(sc, WB_SIO, \ 235 CSR_READ_4(sc, WB_SIO) | (x)) 236 237#define SIO_CLR(x) \ 238 CSR_WRITE_4(sc, WB_SIO, \ 239 CSR_READ_4(sc, WB_SIO) & ~(x)) 240 241/* 242 * Send a read command and address to the EEPROM, check for ACK. 243 */ 244static void 245wb_eeprom_putbyte(sc, addr) 246 struct wb_softc *sc; 247 int addr; 248{ 249 register int d, i; 250 251 d = addr | WB_EECMD_READ; 252 253 /* 254 * Feed in each bit and stobe the clock. 255 */ 256 for (i = 0x400; i; i >>= 1) { 257 if (d & i) { 258 SIO_SET(WB_SIO_EE_DATAIN); 259 } else { 260 SIO_CLR(WB_SIO_EE_DATAIN); 261 } 262 DELAY(100); 263 SIO_SET(WB_SIO_EE_CLK); 264 DELAY(150); 265 SIO_CLR(WB_SIO_EE_CLK); 266 DELAY(100); 267 } 268 269 return; 270} 271 272/* 273 * Read a word of data stored in the EEPROM at address 'addr.' 274 */ 275static void 276wb_eeprom_getword(sc, addr, dest) 277 struct wb_softc *sc; 278 int addr; 279 u_int16_t *dest; 280{ 281 register int i; 282 u_int16_t word = 0; 283 284 /* Enter EEPROM access mode. */ 285 CSR_WRITE_4(sc, WB_SIO, WB_SIO_EESEL|WB_SIO_EE_CS); 286 287 /* 288 * Send address of word we want to read. 289 */ 290 wb_eeprom_putbyte(sc, addr); 291 292 CSR_WRITE_4(sc, WB_SIO, WB_SIO_EESEL|WB_SIO_EE_CS); 293 294 /* 295 * Start reading bits from EEPROM. 296 */ 297 for (i = 0x8000; i; i >>= 1) { 298 SIO_SET(WB_SIO_EE_CLK); 299 DELAY(100); 300 if (CSR_READ_4(sc, WB_SIO) & WB_SIO_EE_DATAOUT) 301 word |= i; 302 SIO_CLR(WB_SIO_EE_CLK); 303 DELAY(100); 304 } 305 306 /* Turn off EEPROM access mode. */ 307 CSR_WRITE_4(sc, WB_SIO, 0); 308 309 *dest = word; 310 311 return; 312} 313 314/* 315 * Read a sequence of words from the EEPROM. 316 */ 317static void 318wb_read_eeprom(sc, dest, off, cnt, swap) 319 struct wb_softc *sc; 320 caddr_t dest; 321 int off; 322 int cnt; 323 int swap; 324{ 325 int i; 326 u_int16_t word = 0, *ptr; 327 328 for (i = 0; i < cnt; i++) { 329 wb_eeprom_getword(sc, off + i, &word); 330 ptr = (u_int16_t *)(dest + (i * 2)); 331 if (swap) 332 *ptr = ntohs(word); 333 else 334 *ptr = word; 335 } 336 337 return; 338} 339 340/* 341 * Sync the PHYs by setting data bit and strobing the clock 32 times. 342 */ 343static void 344wb_mii_sync(sc) 345 struct wb_softc *sc; 346{ 347 register int i; 348 349 SIO_SET(WB_SIO_MII_DIR|WB_SIO_MII_DATAIN); 350 351 for (i = 0; i < 32; i++) { 352 SIO_SET(WB_SIO_MII_CLK); 353 DELAY(1); 354 SIO_CLR(WB_SIO_MII_CLK); 355 DELAY(1); 356 } 357 358 return; 359} 360 361/* 362 * Clock a series of bits through the MII. 363 */ 364static void 365wb_mii_send(sc, bits, cnt) 366 struct wb_softc *sc; 367 u_int32_t bits; 368 int cnt; 369{ 370 int i; 371 372 SIO_CLR(WB_SIO_MII_CLK); 373 374 for (i = (0x1 << (cnt - 1)); i; i >>= 1) { 375 if (bits & i) { 376 SIO_SET(WB_SIO_MII_DATAIN); 377 } else { 378 SIO_CLR(WB_SIO_MII_DATAIN); 379 } 380 DELAY(1); 381 SIO_CLR(WB_SIO_MII_CLK); 382 DELAY(1); 383 SIO_SET(WB_SIO_MII_CLK); 384 } 385} 386 387/* 388 * Read an PHY register through the MII. 389 */ 390static int 391wb_mii_readreg(sc, frame) 392 struct wb_softc *sc; 393 struct wb_mii_frame *frame; 394 395{ 396 int i, ack; 397 398 WB_LOCK(sc); 399 400 /* 401 * Set up frame for RX. 402 */ 403 frame->mii_stdelim = WB_MII_STARTDELIM; 404 frame->mii_opcode = WB_MII_READOP; 405 frame->mii_turnaround = 0; 406 frame->mii_data = 0; 407 408 CSR_WRITE_4(sc, WB_SIO, 0); 409 410 /* 411 * Turn on data xmit. 412 */ 413 SIO_SET(WB_SIO_MII_DIR); 414 415 wb_mii_sync(sc); 416 417 /* 418 * Send command/address info. 419 */ 420 wb_mii_send(sc, frame->mii_stdelim, 2); 421 wb_mii_send(sc, frame->mii_opcode, 2); 422 wb_mii_send(sc, frame->mii_phyaddr, 5); 423 wb_mii_send(sc, frame->mii_regaddr, 5); 424 425 /* Idle bit */ 426 SIO_CLR((WB_SIO_MII_CLK|WB_SIO_MII_DATAIN)); 427 DELAY(1); 428 SIO_SET(WB_SIO_MII_CLK); 429 DELAY(1); 430 431 /* Turn off xmit. */ 432 SIO_CLR(WB_SIO_MII_DIR); 433 /* Check for ack */ 434 SIO_CLR(WB_SIO_MII_CLK); 435 DELAY(1); 436 ack = CSR_READ_4(sc, WB_SIO) & WB_SIO_MII_DATAOUT; 437 SIO_SET(WB_SIO_MII_CLK); 438 DELAY(1); 439 SIO_CLR(WB_SIO_MII_CLK); 440 DELAY(1); 441 SIO_SET(WB_SIO_MII_CLK); 442 DELAY(1); 443 444 /* 445 * Now try reading data bits. If the ack failed, we still 446 * need to clock through 16 cycles to keep the PHY(s) in sync. 447 */ 448 if (ack) { 449 for(i = 0; i < 16; i++) { 450 SIO_CLR(WB_SIO_MII_CLK); 451 DELAY(1); 452 SIO_SET(WB_SIO_MII_CLK); 453 DELAY(1); 454 } 455 goto fail; 456 } 457 458 for (i = 0x8000; i; i >>= 1) { 459 SIO_CLR(WB_SIO_MII_CLK); 460 DELAY(1); 461 if (!ack) { 462 if (CSR_READ_4(sc, WB_SIO) & WB_SIO_MII_DATAOUT) 463 frame->mii_data |= i; 464 DELAY(1); 465 } 466 SIO_SET(WB_SIO_MII_CLK); 467 DELAY(1); 468 } 469 470fail: 471 472 SIO_CLR(WB_SIO_MII_CLK); 473 DELAY(1); 474 SIO_SET(WB_SIO_MII_CLK); 475 DELAY(1); 476 477 WB_UNLOCK(sc); 478 479 if (ack) 480 return(1); 481 return(0); 482} 483 484/* 485 * Write to a PHY register through the MII. 486 */ 487static int 488wb_mii_writereg(sc, frame) 489 struct wb_softc *sc; 490 struct wb_mii_frame *frame; 491 492{ 493 WB_LOCK(sc); 494 495 /* 496 * Set up frame for TX. 497 */ 498 499 frame->mii_stdelim = WB_MII_STARTDELIM; 500 frame->mii_opcode = WB_MII_WRITEOP; 501 frame->mii_turnaround = WB_MII_TURNAROUND; 502 503 /* 504 * Turn on data output. 505 */ 506 SIO_SET(WB_SIO_MII_DIR); 507 508 wb_mii_sync(sc); 509 510 wb_mii_send(sc, frame->mii_stdelim, 2); 511 wb_mii_send(sc, frame->mii_opcode, 2); 512 wb_mii_send(sc, frame->mii_phyaddr, 5); 513 wb_mii_send(sc, frame->mii_regaddr, 5); 514 wb_mii_send(sc, frame->mii_turnaround, 2); 515 wb_mii_send(sc, frame->mii_data, 16); 516 517 /* Idle bit. */ 518 SIO_SET(WB_SIO_MII_CLK); 519 DELAY(1); 520 SIO_CLR(WB_SIO_MII_CLK); 521 DELAY(1); 522 523 /* 524 * Turn off xmit. 525 */ 526 SIO_CLR(WB_SIO_MII_DIR); 527 528 WB_UNLOCK(sc); 529 530 return(0); 531} 532 533static int 534wb_miibus_readreg(dev, phy, reg) 535 device_t dev; 536 int phy, reg; 537{ 538 struct wb_softc *sc; 539 struct wb_mii_frame frame; 540 541 sc = device_get_softc(dev); 542 543 bzero((char *)&frame, sizeof(frame)); 544 545 frame.mii_phyaddr = phy; 546 frame.mii_regaddr = reg; 547 wb_mii_readreg(sc, &frame); 548 549 return(frame.mii_data); 550} 551 552static int 553wb_miibus_writereg(dev, phy, reg, data) 554 device_t dev; 555 int phy, reg, data; 556{ 557 struct wb_softc *sc; 558 struct wb_mii_frame frame; 559 560 sc = device_get_softc(dev); 561 562 bzero((char *)&frame, sizeof(frame)); 563 564 frame.mii_phyaddr = phy; 565 frame.mii_regaddr = reg; 566 frame.mii_data = data; 567 568 wb_mii_writereg(sc, &frame); 569 570 return(0); 571} 572 573static void 574wb_miibus_statchg(dev) 575 device_t dev; 576{ 577 struct wb_softc *sc; 578 struct mii_data *mii; 579 580 sc = device_get_softc(dev); 581 WB_LOCK(sc); 582 mii = device_get_softc(sc->wb_miibus); 583 wb_setcfg(sc, mii->mii_media_active); 584 WB_UNLOCK(sc); 585 586 return; 587} 588 589/* 590 * Program the 64-bit multicast hash filter. 591 */ 592static void 593wb_setmulti(sc) 594 struct wb_softc *sc; 595{ 596 struct ifnet *ifp; 597 int h = 0; 598 u_int32_t hashes[2] = { 0, 0 }; 599 struct ifmultiaddr *ifma; 600 u_int32_t rxfilt; 601 int mcnt = 0; 602 603 ifp = &sc->arpcom.ac_if; 604 605 rxfilt = CSR_READ_4(sc, WB_NETCFG); 606 607 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 608 rxfilt |= WB_NETCFG_RX_MULTI; 609 CSR_WRITE_4(sc, WB_NETCFG, rxfilt); 610 CSR_WRITE_4(sc, WB_MAR0, 0xFFFFFFFF); 611 CSR_WRITE_4(sc, WB_MAR1, 0xFFFFFFFF); 612 return; 613 } 614 615 /* first, zot all the existing hash bits */ 616 CSR_WRITE_4(sc, WB_MAR0, 0); 617 CSR_WRITE_4(sc, WB_MAR1, 0); 618 619 /* now program new ones */ 620 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 621 if (ifma->ifma_addr->sa_family != AF_LINK) 622 continue; 623 h = ~ether_crc32_be(LLADDR((struct sockaddr_dl *) 624 ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; 625 if (h < 32) 626 hashes[0] |= (1 << h); 627 else 628 hashes[1] |= (1 << (h - 32)); 629 mcnt++; 630 } 631 632 if (mcnt) 633 rxfilt |= WB_NETCFG_RX_MULTI; 634 else 635 rxfilt &= ~WB_NETCFG_RX_MULTI; 636 637 CSR_WRITE_4(sc, WB_MAR0, hashes[0]); 638 CSR_WRITE_4(sc, WB_MAR1, hashes[1]); 639 CSR_WRITE_4(sc, WB_NETCFG, rxfilt); 640 641 return; 642} 643 644/* 645 * The Winbond manual states that in order to fiddle with the 646 * 'full-duplex' and '100Mbps' bits in the netconfig register, we 647 * first have to put the transmit and/or receive logic in the idle state. 648 */ 649static void 650wb_setcfg(sc, media) 651 struct wb_softc *sc; 652 u_int32_t media; 653{ 654 int i, restart = 0; 655 656 if (CSR_READ_4(sc, WB_NETCFG) & (WB_NETCFG_TX_ON|WB_NETCFG_RX_ON)) { 657 restart = 1; 658 WB_CLRBIT(sc, WB_NETCFG, (WB_NETCFG_TX_ON|WB_NETCFG_RX_ON)); 659 660 for (i = 0; i < WB_TIMEOUT; i++) { 661 DELAY(10); 662 if ((CSR_READ_4(sc, WB_ISR) & WB_ISR_TX_IDLE) && 663 (CSR_READ_4(sc, WB_ISR) & WB_ISR_RX_IDLE)) 664 break; 665 } 666 667 if (i == WB_TIMEOUT) 668 printf("wb%d: failed to force tx and " 669 "rx to idle state\n", sc->wb_unit); 670 } 671 672 if (IFM_SUBTYPE(media) == IFM_10_T) 673 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_100MBPS); 674 else 675 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_100MBPS); 676 677 if ((media & IFM_GMASK) == IFM_FDX) 678 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_FULLDUPLEX); 679 else 680 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_FULLDUPLEX); 681 682 if (restart) 683 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON|WB_NETCFG_RX_ON); 684 685 return; 686} 687 688static void 689wb_reset(sc) 690 struct wb_softc *sc; 691{ 692 register int i; 693 struct mii_data *mii; 694 695 CSR_WRITE_4(sc, WB_NETCFG, 0); 696 CSR_WRITE_4(sc, WB_BUSCTL, 0); 697 CSR_WRITE_4(sc, WB_TXADDR, 0); 698 CSR_WRITE_4(sc, WB_RXADDR, 0); 699 700 WB_SETBIT(sc, WB_BUSCTL, WB_BUSCTL_RESET); 701 WB_SETBIT(sc, WB_BUSCTL, WB_BUSCTL_RESET); 702 703 for (i = 0; i < WB_TIMEOUT; i++) { 704 DELAY(10); 705 if (!(CSR_READ_4(sc, WB_BUSCTL) & WB_BUSCTL_RESET)) 706 break; 707 } 708 if (i == WB_TIMEOUT) 709 printf("wb%d: reset never completed!\n", sc->wb_unit); 710 711 /* Wait a little while for the chip to get its brains in order. */ 712 DELAY(1000); 713 714 if (sc->wb_miibus == NULL) 715 return; 716 717 mii = device_get_softc(sc->wb_miibus); 718 if (mii == NULL) 719 return; 720 721 if (mii->mii_instance) { 722 struct mii_softc *miisc; 723 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 724 mii_phy_reset(miisc); 725 } 726 727 return; 728} 729 730static void 731wb_fixmedia(sc) 732 struct wb_softc *sc; 733{ 734 struct mii_data *mii = NULL; 735 struct ifnet *ifp; 736 u_int32_t media; 737 738 if (sc->wb_miibus == NULL) 739 return; 740 741 mii = device_get_softc(sc->wb_miibus); 742 ifp = &sc->arpcom.ac_if; 743 744 mii_pollstat(mii); 745 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) { 746 media = mii->mii_media_active & ~IFM_10_T; 747 media |= IFM_100_TX; 748 } else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) { 749 media = mii->mii_media_active & ~IFM_100_TX; 750 media |= IFM_10_T; 751 } else 752 return; 753 754 ifmedia_set(&mii->mii_media, media); 755 756 return; 757} 758 759/* 760 * Probe for a Winbond chip. Check the PCI vendor and device 761 * IDs against our list and return a device name if we find a match. 762 */ 763static int 764wb_probe(dev) 765 device_t dev; 766{ 767 struct wb_type *t; 768 769 t = wb_devs; 770 771 while(t->wb_name != NULL) { 772 if ((pci_get_vendor(dev) == t->wb_vid) && 773 (pci_get_device(dev) == t->wb_did)) { 774 device_set_desc(dev, t->wb_name); 775 return(0); 776 } 777 t++; 778 } 779 780 return(ENXIO); 781} 782 783/* 784 * Attach the interface. Allocate softc structures, do ifmedia 785 * setup and ethernet/BPF attach. 786 */ 787static int 788wb_attach(dev) 789 device_t dev; 790{ 791 u_char eaddr[ETHER_ADDR_LEN]; 792 struct wb_softc *sc; 793 struct ifnet *ifp; 794 int unit, error = 0, rid; 795 796 sc = device_get_softc(dev); 797 unit = device_get_unit(dev); 798 799 mtx_init(&sc->wb_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 800 MTX_DEF | MTX_RECURSE); 801 /* 802 * Map control/status registers. 803 */ 804 pci_enable_busmaster(dev); 805 806 rid = WB_RID; 807 sc->wb_res = bus_alloc_resource_any(dev, WB_RES, &rid, RF_ACTIVE); 808 809 if (sc->wb_res == NULL) { 810 printf("wb%d: couldn't map ports/memory\n", unit); 811 error = ENXIO; 812 goto fail; 813 } 814 815 sc->wb_btag = rman_get_bustag(sc->wb_res); 816 sc->wb_bhandle = rman_get_bushandle(sc->wb_res); 817 818 /* Allocate interrupt */ 819 rid = 0; 820 sc->wb_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 821 RF_SHAREABLE | RF_ACTIVE); 822 823 if (sc->wb_irq == NULL) { 824 printf("wb%d: couldn't map interrupt\n", unit); 825 error = ENXIO; 826 goto fail; 827 } 828 829 /* Save the cache line size. */ 830 sc->wb_cachesize = pci_read_config(dev, WB_PCI_CACHELEN, 4) & 0xFF; 831 832 /* Reset the adapter. */ 833 wb_reset(sc); 834 835 /* 836 * Get station address from the EEPROM. 837 */ 838 wb_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 0); 839 840 sc->wb_unit = unit; 841 bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); 842 843 sc->wb_ldata = contigmalloc(sizeof(struct wb_list_data) + 8, M_DEVBUF, 844 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); 845 846 if (sc->wb_ldata == NULL) { 847 printf("wb%d: no memory for list buffers!\n", unit); 848 error = ENXIO; 849 goto fail; 850 } 851 852 bzero(sc->wb_ldata, sizeof(struct wb_list_data)); 853 854 ifp = &sc->arpcom.ac_if; 855 ifp->if_softc = sc; 856 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 857 ifp->if_mtu = ETHERMTU; 858 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST | 859 IFF_NEEDSGIANT; 860 ifp->if_ioctl = wb_ioctl; 861 ifp->if_start = wb_start; 862 ifp->if_watchdog = wb_watchdog; 863 ifp->if_init = wb_init; 864 ifp->if_baudrate = 10000000; 865 ifp->if_snd.ifq_maxlen = WB_TX_LIST_CNT - 1; 866 867 /* 868 * Do MII setup. 869 */ 870 if (mii_phy_probe(dev, &sc->wb_miibus, 871 wb_ifmedia_upd, wb_ifmedia_sts)) { 872 error = ENXIO; 873 goto fail; 874 } 875 876 /* 877 * Call MI attach routine. 878 */ 879 ether_ifattach(ifp, eaddr); 880 881 /* Hook interrupt last to avoid having to lock softc */ 882 error = bus_setup_intr(dev, sc->wb_irq, INTR_TYPE_NET, 883 wb_intr, sc, &sc->wb_intrhand); 884 885 if (error) { 886 printf("wb%d: couldn't set up irq\n", unit); 887 ether_ifdetach(ifp); 888 goto fail; 889 } 890 891fail: 892 if (error) 893 wb_detach(dev); 894 895 return(error); 896} 897 898/* 899 * Shutdown hardware and free up resources. This can be called any 900 * time after the mutex has been initialized. It is called in both 901 * the error case in attach and the normal detach case so it needs 902 * to be careful about only freeing resources that have actually been 903 * allocated. 904 */ 905static int 906wb_detach(dev) 907 device_t dev; 908{ 909 struct wb_softc *sc; 910 struct ifnet *ifp; 911 912 sc = device_get_softc(dev); 913 KASSERT(mtx_initialized(&sc->wb_mtx), ("wb mutex not initialized")); 914 WB_LOCK(sc); 915 ifp = &sc->arpcom.ac_if; 916 917 /* 918 * Delete any miibus and phy devices attached to this interface. 919 * This should only be done if attach succeeded. 920 */ 921 if (device_is_attached(dev)) { 922 wb_stop(sc); 923 ether_ifdetach(ifp); 924 } 925 if (sc->wb_miibus) 926 device_delete_child(dev, sc->wb_miibus); 927 bus_generic_detach(dev); 928 929 if (sc->wb_intrhand) 930 bus_teardown_intr(dev, sc->wb_irq, sc->wb_intrhand); 931 if (sc->wb_irq) 932 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->wb_irq); 933 if (sc->wb_res) 934 bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res); 935 936 if (sc->wb_ldata) { 937 contigfree(sc->wb_ldata, sizeof(struct wb_list_data) + 8, 938 M_DEVBUF); 939 } 940 941 WB_UNLOCK(sc); 942 mtx_destroy(&sc->wb_mtx); 943 944 return(0); 945} 946 947/* 948 * Initialize the transmit descriptors. 949 */ 950static int 951wb_list_tx_init(sc) 952 struct wb_softc *sc; 953{ 954 struct wb_chain_data *cd; 955 struct wb_list_data *ld; 956 int i; 957 958 cd = &sc->wb_cdata; 959 ld = sc->wb_ldata; 960 961 for (i = 0; i < WB_TX_LIST_CNT; i++) { 962 cd->wb_tx_chain[i].wb_ptr = &ld->wb_tx_list[i]; 963 if (i == (WB_TX_LIST_CNT - 1)) { 964 cd->wb_tx_chain[i].wb_nextdesc = 965 &cd->wb_tx_chain[0]; 966 } else { 967 cd->wb_tx_chain[i].wb_nextdesc = 968 &cd->wb_tx_chain[i + 1]; 969 } 970 } 971 972 cd->wb_tx_free = &cd->wb_tx_chain[0]; 973 cd->wb_tx_tail = cd->wb_tx_head = NULL; 974 975 return(0); 976} 977 978 979/* 980 * Initialize the RX descriptors and allocate mbufs for them. Note that 981 * we arrange the descriptors in a closed ring, so that the last descriptor 982 * points back to the first. 983 */ 984static int 985wb_list_rx_init(sc) 986 struct wb_softc *sc; 987{ 988 struct wb_chain_data *cd; 989 struct wb_list_data *ld; 990 int i; 991 992 cd = &sc->wb_cdata; 993 ld = sc->wb_ldata; 994 995 for (i = 0; i < WB_RX_LIST_CNT; i++) { 996 cd->wb_rx_chain[i].wb_ptr = 997 (struct wb_desc *)&ld->wb_rx_list[i]; 998 cd->wb_rx_chain[i].wb_buf = (void *)&ld->wb_rxbufs[i]; 999 if (wb_newbuf(sc, &cd->wb_rx_chain[i], NULL) == ENOBUFS) 1000 return(ENOBUFS); 1001 if (i == (WB_RX_LIST_CNT - 1)) { 1002 cd->wb_rx_chain[i].wb_nextdesc = &cd->wb_rx_chain[0]; 1003 ld->wb_rx_list[i].wb_next = 1004 vtophys(&ld->wb_rx_list[0]); 1005 } else { 1006 cd->wb_rx_chain[i].wb_nextdesc = 1007 &cd->wb_rx_chain[i + 1]; 1008 ld->wb_rx_list[i].wb_next = 1009 vtophys(&ld->wb_rx_list[i + 1]); 1010 } 1011 } 1012 1013 cd->wb_rx_head = &cd->wb_rx_chain[0]; 1014 1015 return(0); 1016} 1017 1018static void 1019wb_bfree(buf, args) 1020 void *buf; 1021 void *args; 1022{ 1023 return; 1024} 1025 1026/* 1027 * Initialize an RX descriptor and attach an MBUF cluster. 1028 */ 1029static int 1030wb_newbuf(sc, c, m) 1031 struct wb_softc *sc; 1032 struct wb_chain_onefrag *c; 1033 struct mbuf *m; 1034{ 1035 struct mbuf *m_new = NULL; 1036 1037 if (m == NULL) { 1038 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 1039 if (m_new == NULL) 1040 return(ENOBUFS); 1041 m_new->m_data = c->wb_buf; 1042 m_new->m_pkthdr.len = m_new->m_len = WB_BUFBYTES; 1043 MEXTADD(m_new, c->wb_buf, WB_BUFBYTES, wb_bfree, NULL, 0, 1044 EXT_NET_DRV); 1045 } else { 1046 m_new = m; 1047 m_new->m_len = m_new->m_pkthdr.len = WB_BUFBYTES; 1048 m_new->m_data = m_new->m_ext.ext_buf; 1049 } 1050 1051 m_adj(m_new, sizeof(u_int64_t)); 1052 1053 c->wb_mbuf = m_new; 1054 c->wb_ptr->wb_data = vtophys(mtod(m_new, caddr_t)); 1055 c->wb_ptr->wb_ctl = WB_RXCTL_RLINK | 1536; 1056 c->wb_ptr->wb_status = WB_RXSTAT; 1057 1058 return(0); 1059} 1060 1061/* 1062 * A frame has been uploaded: pass the resulting mbuf chain up to 1063 * the higher level protocols. 1064 */ 1065static void 1066wb_rxeof(sc) 1067 struct wb_softc *sc; 1068{ 1069 struct mbuf *m = NULL; 1070 struct ifnet *ifp; 1071 struct wb_chain_onefrag *cur_rx; 1072 int total_len = 0; 1073 u_int32_t rxstat; 1074 1075 WB_LOCK_ASSERT(sc); 1076 1077 ifp = &sc->arpcom.ac_if; 1078 1079 while(!((rxstat = sc->wb_cdata.wb_rx_head->wb_ptr->wb_status) & 1080 WB_RXSTAT_OWN)) { 1081 struct mbuf *m0 = NULL; 1082 1083 cur_rx = sc->wb_cdata.wb_rx_head; 1084 sc->wb_cdata.wb_rx_head = cur_rx->wb_nextdesc; 1085 1086 m = cur_rx->wb_mbuf; 1087 1088 if ((rxstat & WB_RXSTAT_MIIERR) || 1089 (WB_RXBYTES(cur_rx->wb_ptr->wb_status) < WB_MIN_FRAMELEN) || 1090 (WB_RXBYTES(cur_rx->wb_ptr->wb_status) > 1536) || 1091 !(rxstat & WB_RXSTAT_LASTFRAG) || 1092 !(rxstat & WB_RXSTAT_RXCMP)) { 1093 ifp->if_ierrors++; 1094 wb_newbuf(sc, cur_rx, m); 1095 printf("wb%x: receiver babbling: possible chip " 1096 "bug, forcing reset\n", sc->wb_unit); 1097 wb_fixmedia(sc); 1098 wb_reset(sc); 1099 wb_init(sc); 1100 return; 1101 } 1102 1103 if (rxstat & WB_RXSTAT_RXERR) { 1104 ifp->if_ierrors++; 1105 wb_newbuf(sc, cur_rx, m); 1106 break; 1107 } 1108 1109 /* No errors; receive the packet. */ 1110 total_len = WB_RXBYTES(cur_rx->wb_ptr->wb_status); 1111 1112 /* 1113 * XXX The Winbond chip includes the CRC with every 1114 * received frame, and there's no way to turn this 1115 * behavior off (at least, I can't find anything in 1116 * the manual that explains how to do it) so we have 1117 * to trim off the CRC manually. 1118 */ 1119 total_len -= ETHER_CRC_LEN; 1120 1121 m0 = m_devget(mtod(m, char *), total_len, ETHER_ALIGN, ifp, 1122 NULL); 1123 wb_newbuf(sc, cur_rx, m); 1124 if (m0 == NULL) { 1125 ifp->if_ierrors++; 1126 break; 1127 } 1128 m = m0; 1129 1130 ifp->if_ipackets++; 1131 WB_UNLOCK(sc); 1132 (*ifp->if_input)(ifp, m); 1133 WB_LOCK(sc); 1134 } 1135} 1136 1137static void 1138wb_rxeoc(sc) 1139 struct wb_softc *sc; 1140{ 1141 wb_rxeof(sc); 1142 1143 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); 1144 CSR_WRITE_4(sc, WB_RXADDR, vtophys(&sc->wb_ldata->wb_rx_list[0])); 1145 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); 1146 if (CSR_READ_4(sc, WB_ISR) & WB_RXSTATE_SUSPEND) 1147 CSR_WRITE_4(sc, WB_RXSTART, 0xFFFFFFFF); 1148 1149 return; 1150} 1151 1152/* 1153 * A frame was downloaded to the chip. It's safe for us to clean up 1154 * the list buffers. 1155 */ 1156static void 1157wb_txeof(sc) 1158 struct wb_softc *sc; 1159{ 1160 struct wb_chain *cur_tx; 1161 struct ifnet *ifp; 1162 1163 ifp = &sc->arpcom.ac_if; 1164 1165 /* Clear the timeout timer. */ 1166 ifp->if_timer = 0; 1167 1168 if (sc->wb_cdata.wb_tx_head == NULL) 1169 return; 1170 1171 /* 1172 * Go through our tx list and free mbufs for those 1173 * frames that have been transmitted. 1174 */ 1175 while(sc->wb_cdata.wb_tx_head->wb_mbuf != NULL) { 1176 u_int32_t txstat; 1177 1178 cur_tx = sc->wb_cdata.wb_tx_head; 1179 txstat = WB_TXSTATUS(cur_tx); 1180 1181 if ((txstat & WB_TXSTAT_OWN) || txstat == WB_UNSENT) 1182 break; 1183 1184 if (txstat & WB_TXSTAT_TXERR) { 1185 ifp->if_oerrors++; 1186 if (txstat & WB_TXSTAT_ABORT) 1187 ifp->if_collisions++; 1188 if (txstat & WB_TXSTAT_LATECOLL) 1189 ifp->if_collisions++; 1190 } 1191 1192 ifp->if_collisions += (txstat & WB_TXSTAT_COLLCNT) >> 3; 1193 1194 ifp->if_opackets++; 1195 m_freem(cur_tx->wb_mbuf); 1196 cur_tx->wb_mbuf = NULL; 1197 1198 if (sc->wb_cdata.wb_tx_head == sc->wb_cdata.wb_tx_tail) { 1199 sc->wb_cdata.wb_tx_head = NULL; 1200 sc->wb_cdata.wb_tx_tail = NULL; 1201 break; 1202 } 1203 1204 sc->wb_cdata.wb_tx_head = cur_tx->wb_nextdesc; 1205 } 1206 1207 return; 1208} 1209 1210/* 1211 * TX 'end of channel' interrupt handler. 1212 */ 1213static void 1214wb_txeoc(sc) 1215 struct wb_softc *sc; 1216{ 1217 struct ifnet *ifp; 1218 1219 ifp = &sc->arpcom.ac_if; 1220 1221 ifp->if_timer = 0; 1222 1223 if (sc->wb_cdata.wb_tx_head == NULL) { 1224 ifp->if_flags &= ~IFF_OACTIVE; 1225 sc->wb_cdata.wb_tx_tail = NULL; 1226 } else { 1227 if (WB_TXOWN(sc->wb_cdata.wb_tx_head) == WB_UNSENT) { 1228 WB_TXOWN(sc->wb_cdata.wb_tx_head) = WB_TXSTAT_OWN; 1229 ifp->if_timer = 5; 1230 CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF); 1231 } 1232 } 1233 1234 return; 1235} 1236 1237static void 1238wb_intr(arg) 1239 void *arg; 1240{ 1241 struct wb_softc *sc; 1242 struct ifnet *ifp; 1243 u_int32_t status; 1244 1245 sc = arg; 1246 WB_LOCK(sc); 1247 ifp = &sc->arpcom.ac_if; 1248 1249 if (!(ifp->if_flags & IFF_UP)) { 1250 WB_UNLOCK(sc); 1251 return; 1252 } 1253 1254 /* Disable interrupts. */ 1255 CSR_WRITE_4(sc, WB_IMR, 0x00000000); 1256 1257 for (;;) { 1258 1259 status = CSR_READ_4(sc, WB_ISR); 1260 if (status) 1261 CSR_WRITE_4(sc, WB_ISR, status); 1262 1263 if ((status & WB_INTRS) == 0) 1264 break; 1265 1266 if ((status & WB_ISR_RX_NOBUF) || (status & WB_ISR_RX_ERR)) { 1267 ifp->if_ierrors++; 1268 wb_reset(sc); 1269 if (status & WB_ISR_RX_ERR) 1270 wb_fixmedia(sc); 1271 wb_init(sc); 1272 continue; 1273 } 1274 1275 if (status & WB_ISR_RX_OK) 1276 wb_rxeof(sc); 1277 1278 if (status & WB_ISR_RX_IDLE) 1279 wb_rxeoc(sc); 1280 1281 if (status & WB_ISR_TX_OK) 1282 wb_txeof(sc); 1283 1284 if (status & WB_ISR_TX_NOBUF) 1285 wb_txeoc(sc); 1286 1287 if (status & WB_ISR_TX_IDLE) { 1288 wb_txeof(sc); 1289 if (sc->wb_cdata.wb_tx_head != NULL) { 1290 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); 1291 CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF); 1292 } 1293 } 1294 1295 if (status & WB_ISR_TX_UNDERRUN) { 1296 ifp->if_oerrors++; 1297 wb_txeof(sc); 1298 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); 1299 /* Jack up TX threshold */ 1300 sc->wb_txthresh += WB_TXTHRESH_CHUNK; 1301 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_THRESH); 1302 WB_SETBIT(sc, WB_NETCFG, WB_TXTHRESH(sc->wb_txthresh)); 1303 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); 1304 } 1305 1306 if (status & WB_ISR_BUS_ERR) { 1307 wb_reset(sc); 1308 wb_init(sc); 1309 } 1310 1311 } 1312 1313 /* Re-enable interrupts. */ 1314 CSR_WRITE_4(sc, WB_IMR, WB_INTRS); 1315 1316 if (ifp->if_snd.ifq_head != NULL) { 1317 wb_start(ifp); 1318 } 1319 1320 WB_UNLOCK(sc); 1321 1322 return; 1323} 1324 1325static void 1326wb_tick(xsc) 1327 void *xsc; 1328{ 1329 struct wb_softc *sc; 1330 struct mii_data *mii; 1331 1332 sc = xsc; 1333 WB_LOCK(sc); 1334 mii = device_get_softc(sc->wb_miibus); 1335 1336 mii_tick(mii); 1337 1338 sc->wb_stat_ch = timeout(wb_tick, sc, hz); 1339 1340 WB_UNLOCK(sc); 1341 1342 return; 1343} 1344 1345/* 1346 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 1347 * pointers to the fragment pointers. 1348 */ 1349static int 1350wb_encap(sc, c, m_head) 1351 struct wb_softc *sc; 1352 struct wb_chain *c; 1353 struct mbuf *m_head; 1354{ 1355 int frag = 0; 1356 struct wb_desc *f = NULL; 1357 int total_len; 1358 struct mbuf *m; 1359 1360 /* 1361 * Start packing the mbufs in this chain into 1362 * the fragment pointers. Stop when we run out 1363 * of fragments or hit the end of the mbuf chain. 1364 */ 1365 m = m_head; 1366 total_len = 0; 1367 1368 for (m = m_head, frag = 0; m != NULL; m = m->m_next) { 1369 if (m->m_len != 0) { 1370 if (frag == WB_MAXFRAGS) 1371 break; 1372 total_len += m->m_len; 1373 f = &c->wb_ptr->wb_frag[frag]; 1374 f->wb_ctl = WB_TXCTL_TLINK | m->m_len; 1375 if (frag == 0) { 1376 f->wb_ctl |= WB_TXCTL_FIRSTFRAG; 1377 f->wb_status = 0; 1378 } else 1379 f->wb_status = WB_TXSTAT_OWN; 1380 f->wb_next = vtophys(&c->wb_ptr->wb_frag[frag + 1]); 1381 f->wb_data = vtophys(mtod(m, vm_offset_t)); 1382 frag++; 1383 } 1384 } 1385 1386 /* 1387 * Handle special case: we used up all 16 fragments, 1388 * but we have more mbufs left in the chain. Copy the 1389 * data into an mbuf cluster. Note that we don't 1390 * bother clearing the values in the other fragment 1391 * pointers/counters; it wouldn't gain us anything, 1392 * and would waste cycles. 1393 */ 1394 if (m != NULL) { 1395 struct mbuf *m_new = NULL; 1396 1397 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 1398 if (m_new == NULL) 1399 return(1); 1400 if (m_head->m_pkthdr.len > MHLEN) { 1401 MCLGET(m_new, M_DONTWAIT); 1402 if (!(m_new->m_flags & M_EXT)) { 1403 m_freem(m_new); 1404 return(1); 1405 } 1406 } 1407 m_copydata(m_head, 0, m_head->m_pkthdr.len, 1408 mtod(m_new, caddr_t)); 1409 m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; 1410 m_freem(m_head); 1411 m_head = m_new; 1412 f = &c->wb_ptr->wb_frag[0]; 1413 f->wb_status = 0; 1414 f->wb_data = vtophys(mtod(m_new, caddr_t)); 1415 f->wb_ctl = total_len = m_new->m_len; 1416 f->wb_ctl |= WB_TXCTL_TLINK|WB_TXCTL_FIRSTFRAG; 1417 frag = 1; 1418 } 1419 1420 if (total_len < WB_MIN_FRAMELEN) { 1421 f = &c->wb_ptr->wb_frag[frag]; 1422 f->wb_ctl = WB_MIN_FRAMELEN - total_len; 1423 f->wb_data = vtophys(&sc->wb_cdata.wb_pad); 1424 f->wb_ctl |= WB_TXCTL_TLINK; 1425 f->wb_status = WB_TXSTAT_OWN; 1426 frag++; 1427 } 1428 1429 c->wb_mbuf = m_head; 1430 c->wb_lastdesc = frag - 1; 1431 WB_TXCTL(c) |= WB_TXCTL_LASTFRAG; 1432 WB_TXNEXT(c) = vtophys(&c->wb_nextdesc->wb_ptr->wb_frag[0]); 1433 1434 return(0); 1435} 1436 1437/* 1438 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 1439 * to the mbuf data regions directly in the transmit lists. We also save a 1440 * copy of the pointers since the transmit list fragment pointers are 1441 * physical addresses. 1442 */ 1443 1444static void 1445wb_start(ifp) 1446 struct ifnet *ifp; 1447{ 1448 struct wb_softc *sc; 1449 struct mbuf *m_head = NULL; 1450 struct wb_chain *cur_tx = NULL, *start_tx; 1451 1452 sc = ifp->if_softc; 1453 WB_LOCK(sc); 1454 1455 /* 1456 * Check for an available queue slot. If there are none, 1457 * punt. 1458 */ 1459 if (sc->wb_cdata.wb_tx_free->wb_mbuf != NULL) { 1460 ifp->if_flags |= IFF_OACTIVE; 1461 WB_UNLOCK(sc); 1462 return; 1463 } 1464 1465 start_tx = sc->wb_cdata.wb_tx_free; 1466 1467 while(sc->wb_cdata.wb_tx_free->wb_mbuf == NULL) { 1468 IF_DEQUEUE(&ifp->if_snd, m_head); 1469 if (m_head == NULL) 1470 break; 1471 1472 /* Pick a descriptor off the free list. */ 1473 cur_tx = sc->wb_cdata.wb_tx_free; 1474 sc->wb_cdata.wb_tx_free = cur_tx->wb_nextdesc; 1475 1476 /* Pack the data into the descriptor. */ 1477 wb_encap(sc, cur_tx, m_head); 1478 1479 if (cur_tx != start_tx) 1480 WB_TXOWN(cur_tx) = WB_TXSTAT_OWN; 1481 1482 /* 1483 * If there's a BPF listener, bounce a copy of this frame 1484 * to him. 1485 */ 1486 BPF_MTAP(ifp, cur_tx->wb_mbuf); 1487 } 1488 1489 /* 1490 * If there are no packets queued, bail. 1491 */ 1492 if (cur_tx == NULL) { 1493 WB_UNLOCK(sc); 1494 return; 1495 } 1496 1497 /* 1498 * Place the request for the upload interrupt 1499 * in the last descriptor in the chain. This way, if 1500 * we're chaining several packets at once, we'll only 1501 * get an interupt once for the whole chain rather than 1502 * once for each packet. 1503 */ 1504 WB_TXCTL(cur_tx) |= WB_TXCTL_FINT; 1505 cur_tx->wb_ptr->wb_frag[0].wb_ctl |= WB_TXCTL_FINT; 1506 sc->wb_cdata.wb_tx_tail = cur_tx; 1507 1508 if (sc->wb_cdata.wb_tx_head == NULL) { 1509 sc->wb_cdata.wb_tx_head = start_tx; 1510 WB_TXOWN(start_tx) = WB_TXSTAT_OWN; 1511 CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF); 1512 } else { 1513 /* 1514 * We need to distinguish between the case where 1515 * the own bit is clear because the chip cleared it 1516 * and where the own bit is clear because we haven't 1517 * set it yet. The magic value WB_UNSET is just some 1518 * ramdomly chosen number which doesn't have the own 1519 * bit set. When we actually transmit the frame, the 1520 * status word will have _only_ the own bit set, so 1521 * the txeoc handler will be able to tell if it needs 1522 * to initiate another transmission to flush out pending 1523 * frames. 1524 */ 1525 WB_TXOWN(start_tx) = WB_UNSENT; 1526 } 1527 1528 /* 1529 * Set a timeout in case the chip goes out to lunch. 1530 */ 1531 ifp->if_timer = 5; 1532 WB_UNLOCK(sc); 1533 1534 return; 1535} 1536 1537static void 1538wb_init(xsc) 1539 void *xsc; 1540{ 1541 struct wb_softc *sc = xsc; 1542 struct ifnet *ifp = &sc->arpcom.ac_if; 1543 int i; 1544 struct mii_data *mii; 1545 1546 WB_LOCK(sc); 1547 mii = device_get_softc(sc->wb_miibus); 1548 1549 /* 1550 * Cancel pending I/O and free all RX/TX buffers. 1551 */ 1552 wb_stop(sc); 1553 wb_reset(sc); 1554 1555 sc->wb_txthresh = WB_TXTHRESH_INIT; 1556 1557 /* 1558 * Set cache alignment and burst length. 1559 */ 1560#ifdef foo 1561 CSR_WRITE_4(sc, WB_BUSCTL, WB_BUSCTL_CONFIG); 1562 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_THRESH); 1563 WB_SETBIT(sc, WB_NETCFG, WB_TXTHRESH(sc->wb_txthresh)); 1564#endif 1565 1566 CSR_WRITE_4(sc, WB_BUSCTL, WB_BUSCTL_MUSTBEONE|WB_BUSCTL_ARBITRATION); 1567 WB_SETBIT(sc, WB_BUSCTL, WB_BURSTLEN_16LONG); 1568 switch(sc->wb_cachesize) { 1569 case 32: 1570 WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_32LONG); 1571 break; 1572 case 16: 1573 WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_16LONG); 1574 break; 1575 case 8: 1576 WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_8LONG); 1577 break; 1578 case 0: 1579 default: 1580 WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_NONE); 1581 break; 1582 } 1583 1584 /* This doesn't tend to work too well at 100Mbps. */ 1585 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_EARLY_ON); 1586 1587 /* Init our MAC address */ 1588 for (i = 0; i < ETHER_ADDR_LEN; i++) { 1589 CSR_WRITE_1(sc, WB_NODE0 + i, sc->arpcom.ac_enaddr[i]); 1590 } 1591 1592 /* Init circular RX list. */ 1593 if (wb_list_rx_init(sc) == ENOBUFS) { 1594 printf("wb%d: initialization failed: no " 1595 "memory for rx buffers\n", sc->wb_unit); 1596 wb_stop(sc); 1597 WB_UNLOCK(sc); 1598 return; 1599 } 1600 1601 /* Init TX descriptors. */ 1602 wb_list_tx_init(sc); 1603 1604 /* If we want promiscuous mode, set the allframes bit. */ 1605 if (ifp->if_flags & IFF_PROMISC) { 1606 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ALLPHYS); 1607 } else { 1608 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ALLPHYS); 1609 } 1610 1611 /* 1612 * Set capture broadcast bit to capture broadcast frames. 1613 */ 1614 if (ifp->if_flags & IFF_BROADCAST) { 1615 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_BROAD); 1616 } else { 1617 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_BROAD); 1618 } 1619 1620 /* 1621 * Program the multicast filter, if necessary. 1622 */ 1623 wb_setmulti(sc); 1624 1625 /* 1626 * Load the address of the RX list. 1627 */ 1628 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); 1629 CSR_WRITE_4(sc, WB_RXADDR, vtophys(&sc->wb_ldata->wb_rx_list[0])); 1630 1631 /* 1632 * Enable interrupts. 1633 */ 1634 CSR_WRITE_4(sc, WB_IMR, WB_INTRS); 1635 CSR_WRITE_4(sc, WB_ISR, 0xFFFFFFFF); 1636 1637 /* Enable receiver and transmitter. */ 1638 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); 1639 CSR_WRITE_4(sc, WB_RXSTART, 0xFFFFFFFF); 1640 1641 WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); 1642 CSR_WRITE_4(sc, WB_TXADDR, vtophys(&sc->wb_ldata->wb_tx_list[0])); 1643 WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); 1644 1645 mii_mediachg(mii); 1646 1647 ifp->if_flags |= IFF_RUNNING; 1648 ifp->if_flags &= ~IFF_OACTIVE; 1649 1650 sc->wb_stat_ch = timeout(wb_tick, sc, hz); 1651 WB_UNLOCK(sc); 1652 1653 return; 1654} 1655 1656/* 1657 * Set media options. 1658 */ 1659static int 1660wb_ifmedia_upd(ifp) 1661 struct ifnet *ifp; 1662{ 1663 struct wb_softc *sc; 1664 1665 sc = ifp->if_softc; 1666 1667 if (ifp->if_flags & IFF_UP) 1668 wb_init(sc); 1669 1670 return(0); 1671} 1672 1673/* 1674 * Report current media status. 1675 */ 1676static void 1677wb_ifmedia_sts(ifp, ifmr) 1678 struct ifnet *ifp; 1679 struct ifmediareq *ifmr; 1680{ 1681 struct wb_softc *sc; 1682 struct mii_data *mii; 1683 1684 sc = ifp->if_softc; 1685 1686 mii = device_get_softc(sc->wb_miibus); 1687 1688 mii_pollstat(mii); 1689 ifmr->ifm_active = mii->mii_media_active; 1690 ifmr->ifm_status = mii->mii_media_status; 1691 1692 return; 1693} 1694 1695static int 1696wb_ioctl(ifp, command, data) 1697 struct ifnet *ifp; 1698 u_long command; 1699 caddr_t data; 1700{ 1701 struct wb_softc *sc = ifp->if_softc; 1702 struct mii_data *mii; 1703 struct ifreq *ifr = (struct ifreq *) data; 1704 int error = 0; 1705 1706 WB_LOCK(sc); 1707 1708 switch(command) { 1709 case SIOCSIFFLAGS: 1710 if (ifp->if_flags & IFF_UP) { 1711 wb_init(sc); 1712 } else { 1713 if (ifp->if_flags & IFF_RUNNING) 1714 wb_stop(sc); 1715 } 1716 error = 0; 1717 break; 1718 case SIOCADDMULTI: 1719 case SIOCDELMULTI: 1720 wb_setmulti(sc); 1721 error = 0; 1722 break; 1723 case SIOCGIFMEDIA: 1724 case SIOCSIFMEDIA: 1725 mii = device_get_softc(sc->wb_miibus); 1726 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1727 break; 1728 default: 1729 error = ether_ioctl(ifp, command, data); 1730 break; 1731 } 1732 1733 WB_UNLOCK(sc); 1734 1735 return(error); 1736} 1737 1738static void 1739wb_watchdog(ifp) 1740 struct ifnet *ifp; 1741{ 1742 struct wb_softc *sc; 1743 1744 sc = ifp->if_softc; 1745 1746 WB_LOCK(sc); 1747 ifp->if_oerrors++; 1748 printf("wb%d: watchdog timeout\n", sc->wb_unit); 1749#ifdef foo 1750 if (!(wb_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT)) 1751 printf("wb%d: no carrier - transceiver cable problem?\n", 1752 sc->wb_unit); 1753#endif 1754 wb_stop(sc); 1755 wb_reset(sc); 1756 wb_init(sc); 1757 1758 if (ifp->if_snd.ifq_head != NULL) 1759 wb_start(ifp); 1760 WB_UNLOCK(sc); 1761 1762 return; 1763} 1764 1765/* 1766 * Stop the adapter and free any mbufs allocated to the 1767 * RX and TX lists. 1768 */ 1769static void 1770wb_stop(sc) 1771 struct wb_softc *sc; 1772{ 1773 register int i; 1774 struct ifnet *ifp; 1775 1776 WB_LOCK(sc); 1777 ifp = &sc->arpcom.ac_if; 1778 ifp->if_timer = 0; 1779 1780 untimeout(wb_tick, sc, sc->wb_stat_ch); 1781 1782 WB_CLRBIT(sc, WB_NETCFG, (WB_NETCFG_RX_ON|WB_NETCFG_TX_ON)); 1783 CSR_WRITE_4(sc, WB_IMR, 0x00000000); 1784 CSR_WRITE_4(sc, WB_TXADDR, 0x00000000); 1785 CSR_WRITE_4(sc, WB_RXADDR, 0x00000000); 1786 1787 /* 1788 * Free data in the RX lists. 1789 */ 1790 for (i = 0; i < WB_RX_LIST_CNT; i++) { 1791 if (sc->wb_cdata.wb_rx_chain[i].wb_mbuf != NULL) { 1792 m_freem(sc->wb_cdata.wb_rx_chain[i].wb_mbuf); 1793 sc->wb_cdata.wb_rx_chain[i].wb_mbuf = NULL; 1794 } 1795 } 1796 bzero((char *)&sc->wb_ldata->wb_rx_list, 1797 sizeof(sc->wb_ldata->wb_rx_list)); 1798 1799 /* 1800 * Free the TX list buffers. 1801 */ 1802 for (i = 0; i < WB_TX_LIST_CNT; i++) { 1803 if (sc->wb_cdata.wb_tx_chain[i].wb_mbuf != NULL) { 1804 m_freem(sc->wb_cdata.wb_tx_chain[i].wb_mbuf); 1805 sc->wb_cdata.wb_tx_chain[i].wb_mbuf = NULL; 1806 } 1807 } 1808 1809 bzero((char *)&sc->wb_ldata->wb_tx_list, 1810 sizeof(sc->wb_ldata->wb_tx_list)); 1811 1812 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1813 WB_UNLOCK(sc); 1814 1815 return; 1816} 1817 1818/* 1819 * Stop all chip I/O so that the kernel's probe routines don't 1820 * get confused by errant DMAs when rebooting. 1821 */ 1822static void 1823wb_shutdown(dev) 1824 device_t dev; 1825{ 1826 struct wb_softc *sc; 1827 1828 sc = device_get_softc(dev); 1829 wb_stop(sc); 1830 1831 return; 1832} 1833