1# This is loader.conf - a file full of useful variables that you can 2# set to change the default load behavior of your system. You should 3# not edit this file! Put any overrides into one of the 4# loader_conf_files instead and you will be able to update these 5# defaults later without spamming your local configuration information. 6# 7# All arguments must be in double quotes. 8# 9# $FreeBSD: releng/11.0/sys/boot/forth/loader.conf 300071 2016-05-17 18:42:38Z jhb $ 10 11############################################################## 12### Basic configuration options ############################ 13############################################################## 14 15exec="echo Loading /boot/defaults/loader.conf" 16 17kernel="kernel" # /boot sub-directory containing kernel and modules 18bootfile="kernel" # Kernel name (possibly absolute path) 19kernel_options="" # Flags to be passed to the kernel 20 21loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" 22nextboot_conf="/boot/nextboot.conf" 23nextboot_enable="NO" 24 25verbose_loading="NO" # Set to YES for verbose loader output 26 27 28############################################################## 29### Splash screen configuration ############################ 30############################################################## 31 32splash_bmp_load="NO" # Set this to YES for bmp splash screen! 33splash_pcx_load="NO" # Set this to YES for pcx splash screen! 34splash_txt_load="NO" # Set this to YES for TheDraw splash screen! 35vesa_load="NO" # Set this to YES to load the vesa module 36bitmap_load="NO" # Set this to YES if you want splash screen! 37bitmap_name="splash.bmp" # Set this to the name of the file 38bitmap_type="splash_image_data" # and place it on the module_path 39 40 41############################################################## 42### Random number generator configuration ################## 43############################################################## 44 45# See rc.conf(5). The entropy_boot_file config variable must agree with the 46# settings below. 47 48entropy_cache_load="YES" # Set this to NO to disable loading 49 # entropy at boot time 50entropy_cache_name="/boot/entropy" # Set this to the name of the file 51entropy_cache_type="/boot/entropy" # Required for the kernel to find 52 # the boot-time entropy cache. This 53 # must not change value even if the 54 # _name above does change! 55 56 57############################################################## 58### RAM Blacklist configuration ############################ 59############################################################## 60 61ram_blacklist_load="NO" # Set this to YES to load a file 62 # containing a list of addresses to 63 # exclude from the running system. 64ram_blacklist_name="/boot/blacklist.txt" # Set this to the name of the file 65ram_blacklist_type="ram_blacklist" # Required for the kernel to find 66 # the blacklist module 67 68 69############################################################## 70### Initial memory disk settings ########################### 71############################################################## 72 73#initmd_load="YES" # The "initmd" prefix is arbitrary. 74#initmd_type="md_image" # Create md(4) disk at boot. 75#initmd_name="/boot/root.img" # Path to a file containing the image. 76#rootdev="ufs:/dev/md0" # Set the root filesystem to md(4) device. 77 78 79############################################################## 80### Loader settings ######################################## 81############################################################## 82 83#loader_delay="3" # Delay in seconds before loading anything. 84 # Default is unset and disabled (no delay). 85#autoboot_delay="10" # Delay in seconds before autobooting, 86 # set to -1 if you don't want user to be 87 # allowed to interrupt autoboot process and 88 # escape to the loader prompt, set to 89 # "NO" to disable autobooting 90#password="" # Prevent changes to boot options 91#bootlock_password="" # Prevent booting (see check-password.4th(8)) 92#geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root 93bootenv_autolist="YES" # Auto populate the list of ZFS Boot Environments 94#beastie_disable="NO" # Turn the beastie boot menu on and off 95#kernels="kernel kernel.old" # Kernels to display in the boot menu 96#loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none 97#comconsole_speed="9600" # Set the current serial console speed 98#console="vidconsole" # A comma separated list of console(s) 99#currdev="disk1s1a" # Set the current device 100module_path="/boot/modules" # Set the module search path 101#prompt="\\${interpret}" # Set the command prompt 102#root_disk_unit="0" # Force the root disk unit number 103#rootdev="disk1s1a" # Set the root filesystem 104#tftp.blksize="1428" # Set the RFC 2348 TFTP block size. 105 # If the TFTP server does not support RFC 2348, 106 # the block size is set to 512. If the value 107 # is out of range ( < 8 || > 9008 ) an error is 108 # returned. 109#twiddle_divisor="1" # >1 means slow down the progress indicator. 110 111 112############################################################## 113### Kernel settings ######################################## 114############################################################## 115 116# The following boot_ variables are enabled by setting them to any value. 117# Their presence in the kernel environment (see kenv(1)) has the same 118# effect as setting the given boot flag (see boot(8)). 119 120#boot_askname="" # -a: Prompt the user for the name of the root device 121#boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM 122#boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger 123#boot_dfltroot="" # -r: Use the statically configured root file system 124#boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger 125#boot_multicons="" # -D: Use multiple consoles 126#boot_mute="" # -m: Mute the console 127#boot_pause="" # -p: Pause after each line during device probing 128#boot_serial="" # -h: Use serial console 129#boot_single="" # -s: Start system in single-user mode 130#boot_verbose="" # -v: Causes extra debugging information to be printed 131#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init" 132 # Sets the list of init candidates 133#init_shell="/bin/sh" # The shell binary used by init(8). 134#init_script="" # Initial script to run by init(8) before chrooting. 135#init_chroot="" # Directory for init(8) to chroot into. 136 137 138############################################################## 139### Kernel tunables ######################################## 140############################################################## 141 142#hw.physmem="1G" # Limit physical memory. See loader(8) 143#kern.dfldsiz="" # Set the initial data size limit 144#kern.dflssiz="" # Set the initial stack size limit 145#kern.hz="100" # Set the kernel interval timer rate 146#kern.maxbcache="" # Set the max buffer cache KVA storage 147#kern.maxdsiz="" # Set the max data size 148#kern.maxfiles="" # Set the sys. wide open files limit 149#kern.maxproc="" # Set the maximum # of processes 150#kern.maxssiz="" # Set the max stack size 151#kern.maxswzone="" # Set the max swmeta KVA storage 152#kern.maxtsiz="" # Set the max text size 153#kern.maxusers="32" # Set size of various static tables 154#kern.msgbufsize="65536" # Set size of kernel message buffer 155#kern.nbuf="" # Set the number of buffer headers 156#kern.ncallout="" # Set the maximum # of timer events 157#kern.ngroups="1023" # Set the maximum # of supplemental groups 158#kern.sgrowsiz="" # Set the amount to grow stack 159#kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus 160 # registration, useful for USB sticks as root 161#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI 162#kern.ipc.maxsockets="" # Set the maximum number of sockets available 163#kern.ipc.nmbclusters="" # Set the number of mbuf clusters 164#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs 165#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE 166#vfs.root.mountfrom="" # Specify root partition in a way the 167 # kernel understands 168#vm.kmem_size="" # Sets the size of kernel memory (bytes) 169#debug.kdb.break_to_debugger="0" # Allow console to break into debugger. 170#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on 171#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable 172#debug.ktr.verbose="1" # Enable console dump of KTR events 173#net.graph.maxalloc="128" # Maximum number of queue items to allocate 174 175 176############################################################## 177### ATA modules ############################################ 178############################################################## 179 180ataacard_load="NO" # ACARD 181ataacerlabs_load="NO" # Acer Labs Inc. (ALI) 182ataamd_load="NO" # American Micro Devices (AMD) 183ataati_load="NO" # ATI 184atacenatek_load="NO" # Cenatek 185atacypress_load="NO" # Cypress 186atacyrix_load="NO" # Cyrix 187atahighpoint_load="NO" # HighPoint 188ataintel_load="NO" # Intel 189ataite_load="NO" # Integrated Technology Inc. (ITE) 190atajmicron_load="NO" # JMicron 191atamarvell_load="NO" # Marvell 192atamicron_load="NO" # Micron 193atanational_load="NO" # National 194atanetcell_load="NO" # NetCell 195atanvidia_load="NO" # nVidia 196atapromise_load="NO" # Promise 197ataserverworks_load="NO" # ServerWorks 198atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD) 199atasis_load="NO" # Silicon Integrated Systems Corp.(SiS) 200atavia_load="NO" # VIA Technologies Inc. 201 202 203############################################################## 204### Filesystem and related modules ######################### 205############################################################## 206 207# Filesystems 208 209cd9660_load="NO" # ISO 9660 filesystem 210fdescfs_load="NO" # Filedescriptors filesystem 211linprocfs_load="NO" # Linux compatibility process filesystem 212linsysfs_load="NO" # Linux compatibility system filesystem 213msdosfs_load="NO" # FAT-12/16/32 214nfsclient_load="NO" # NFS client 215nfsserver_load="NO" # NFS server 216nullfs_load="NO" # Null filesystem 217procfs_load="NO" # Process filesystem 218unionfs_load="NO" # Union filesystem 219zfs_load="NO" # ZFS 220 221# Related stuff 222 223geom_bde_load="NO" # Disk encryption driver (see gbde(4,8)) 224geom_ccd_load="NO" # Concatenated disk driver (see ccd(4), 225 # ccdconfig(8)) 226geom_concat_load="NO" # Concatenated disk driver (see gconcat(8)) 227geom_eli_load="NO" # Disk encryption driver (see geli(8)) 228geom_gate_load="NO" # Userland disk driver (see geom_gate(4), 229 # ggatec(8), ggated(8), ggatel(8)) 230geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8)) 231geom_label_load="NO" # File system labels (see glabel(8)) 232geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see 233 # md(4), mdconfig(8)) 234geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8)) 235geom_mountver_load="NO" # Mount verification disk driver 236geom_nop_load="NO" # Transparent disk driver (see gnop(8)) 237geom_raid3_load="NO" # RAID3 disk driver (see graid3(8)) 238geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8)) 239geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8)) 240geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8)) 241geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4)) 242 243 244############################################################## 245### FireWire modules ####################################### 246############################################################## 247 248firewire_load="NO" # IEEE1394 High-performance Serial Bus 249fwe_load="NO" # Ethernet emulation driver for FireWire 250fwip_load="NO" # IP over FireWire driver 251fwohci_load="NO" # OHCI FireWire chipset device driver 252sbp_load="NO" # SBP-2 Mass Storage Devices driver 253sbp_targ_load="NO" # SBP-2 Target mode 254 255 256############################################################## 257### Screen saver modules ################################### 258############################################################## 259 260# This is best done in rc.conf 261 262screensave_load="NO" # Set to YES to load a screensaver module 263screensave_name="green_saver" # Set to the name of the screensaver module 264 265 266############################################################## 267### Emulation modules ###################################### 268############################################################## 269 270cloudabi_load="NO" # Platform independent CloudABI support 271cloudabi64_load="NO" # 64-bit CloudABI executables support 272ibcs2_load="NO" # IBCS2 (SCO) emulation 273ibcs2_coff_load="NO" 274linux_load="NO" # Linux emulation 275svr4_load="NO" # SystemV R4 emulation 276streams_load="NO" # System V streams module 277 278 279############################################################## 280### Networking modules ##################################### 281############################################################## 282 283if_disc_load="NO" # Discard device 284if_ef_load="NO" # pseudo-device providing support for multiple 285 # ethernet frame types 286if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair 287if_gif_load="NO" # generic tunnel interface 288if_gre_load="NO" # encapsulating network device 289if_stf_load="NO" # 6to4 tunnel interface 290if_tap_load="NO" # Ethernet tunnel software network interface 291if_tun_load="NO" # Tunnel driver (user process ppp) 292if_vlan_load="NO" # IEEE 802.1Q VLAN network interface 293ipfw_load="NO" # Firewall 294pf_load="NO" # packet filter 295 296 297############################################################## 298### Networking drivers ##################################### 299############################################################## 300 301bridgestp_load="NO" # if_bridge(4) support 302miibus_load="NO" # miibus support, needed for some drivers 303carp_load="NO" # carp(4) protocol 304if_ae_load="NO" # Attansic/Atheros L2 FastEthernet 305if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet 306if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet 307if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet 308if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs 309if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs 310if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet 311if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet 312if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet 313if_bfe_load="NO" # Broadcom BCM4401 314if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet 315if_bridge_load="NO" # if_bridge(4) devices 316if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs 317if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs 318if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet 319if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn 320if_cm_load="NO" # SMC (90c26, 90c56, 90c66) 321if_cs_load="NO" # Crystal Semiconductor CS8920 322if_cue_load="NO" # CATC USB-EL1210A USB Ethernet 323if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet 324if_dc_load="NO" # DEC/Intel 21143 and various workalikes 325if_de_load="NO" # DEC DC21x4x Ethernet 326if_ed_load="NO" # National Semiconductor DS8390/WD83C690 327 # Ethernet 328if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 329if_en_load="NO" # Midway-based ATM interfaces 330if_ep_load="NO" # 3Com Etherlink III (3c5x9) 331if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet 332if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet 333if_fatm_load="NO" # Fore PCA200E ATM 334if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet 335 # adapters 336if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558) 337if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC 338if_hatm_load="NO" # Fore/Marconi HE155 and HE622 339if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet 340if_ie_load="NO" # Intel 82586 341if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 342if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless 343if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG 344 # wireless 345if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless 346if_ixgb_load="NO" # Intel PRO/10Gb Ethernet 347if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express 348if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet 349if_lagg_load="NO" # lagg(4) devices 350if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet 351if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit 352 # Ethernet 353if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless 354 # adapter 355if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet 356if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet 357if_my_load="NO" # Myson PCI Fast Ethernet 358if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter 359if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet 360if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet 361if_patm_load="NO" # IDT77252 ATM 362if_pcn_load="NO" # AMD PCnet PCI 363if_ral_load="NO" # Ralink Technology wireless 364if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S 365if_rl_load="NO" # RealTek 8129/8139 366if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet 367if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless 368if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless 369if_sbni_load="NO" # Granch SBNI12 leased line adapters 370if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire") 371if_sge_load="NO" # Silicon Integrated Systems SiS 190/191 372if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016 373if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet 374if_sn_load="NO" # SMC 91Cxx 375if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet 376if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet 377if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2 378if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN") 379if_tx_load="NO" # SMC 83c17x Fast Ethernet 380if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990) 381if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet 382if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet 383if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX 384if_udav_load="NO" # Davicom DM9601 USB Ethernet 385if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless 386if_ural_load="NO" # Ralink Technology USB wireless 387if_urtw_load="NO" # Realtek 8187L USB wireless 388if_vr_load="NO" # VIA Rhine I and Rhine II 389if_vx_load="NO" # 3Com 3C590 family 390if_wb_load="NO" # Winbond W89C840F 391if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs 392if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11 393if_xe_load="NO" # Xircom CreditCard PCMCIA 394if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B) 395utopia_load="NO" # ATM PHY driver 396 397 398############################################################## 399### Netgraph modules ####################################### 400############################################################## 401 402ng_UI_load="NO" # UI netgraph node type 403ng_async_load="NO" # asynchronous framing netgraph node type 404ng_bpf_load="NO" # Berkeley packet filter netgraph node type 405ng_bridge_load="NO" # Ethernet bridging netgraph node type 406ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type 407ng_echo_load="NO" # Netgraph echo node type 408ng_eiface_load="NO" # generic Ethernet interface netgraph node type 409ng_etf_load="NO" # Ethertype filtering netgraph node type 410ng_ether_load="NO" # Ethernet netgraph node type 411ng_frame_relay_load="NO" # frame relay netgraph node type 412ng_gif_load="NO" # generic tunnel interface netgraph node type 413ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes 414ng_hole_load="NO" # Netgraph discard node type 415ng_hub_load="NO" # packet distribution netgraph node type 416ng_iface_load="NO" # interface Netgraph node type 417ng_ip_input_load="NO" # netgraph IP input node type 418ng_ksocket_load="NO" # kernel socket netgraph node type 419ng_l2tp_load="NO" # L2TP protocol netgraph node type 420ng_lmi_load="NO" # frame relay LMI protocol netgraph node type 421ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and 422 # encryption netgraph node type 423ng_netflow_load="NO" # Cisco's NetFlow netgraph node type 424ng_one2many_load="NO" # packet multiplexing netgraph node type 425ng_ppp_load="NO" # PPP protocol netgraph node type 426ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type 427ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type 428ng_rfc1490_load="NO" # RFC 1490 netgraph node type 429ng_socket_load="NO" # Netgraph socket node type 430ng_split_load="NO" # netgraph node to separate incoming and 431 # outgoing flows 432ng_sppp_load="NO" # sppp netgraph node type 433ng_tee_load="NO" # Netgraph ``tee'' node type 434ng_tty_load="NO" # Netgraph node type that is also a line 435 # discipline 436ng_vjc_load="NO" # Van Jacobsen compression netgraph node type 437ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type 438 439 440############################################################## 441### Sound modules ########################################## 442############################################################## 443 444sound_load="NO" # Digital sound subsystem 445snd_ad1816_load="NO" # ad1816 446snd_als4000_load="NO" # als4000 447snd_atiixp_load="NO" # atiixp 448snd_cmi_load="NO" # cmi 449snd_cs4281_load="NO" # cs4281 450snd_csa_load="NO" # csa 451snd_ds1_load="NO" # ds1 452snd_emu10k1_load="NO" # Creative Sound Blaster Live 453snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy 454snd_envy24_load="NO" # VIA Envy24 455snd_envy24ht_load="NO" # VIA Envy24HT 456snd_es137x_load="NO" # es137x 457snd_ess_load="NO" # ess 458snd_fm801_load="NO" # fm801 459snd_hda_load="NO" # Intel High Definition Audio (Controller) 460snd_ich_load="NO" # Intel ICH 461snd_maestro_load="NO" # Maestro 462snd_maestro3_load="NO" # Maestro3 463snd_mss_load="NO" # Mss 464snd_neomagic_load="NO" # Neomagic 465snd_sb16_load="NO" # Sound Blaster 16 466snd_sb8_load="NO" # Sound Blaster Pro 467snd_sbc_load="NO" # Sbc 468snd_solo_load="NO" # Solo 469snd_spicds_load="NO" # SPI codecs 470snd_t4dwave_load="NO" # t4dwave 471snd_via8233_load="NO" # via8233 472snd_via82c686_load="NO" # via82c686 473snd_vibes_load="NO" # vibes 474snd_driver_load="NO" # All sound drivers 475 476 477############################################################## 478### USB modules ############################################ 479############################################################## 480 481usb_load="NO" # USB subsystem 482udbp_load="NO" # USB double bulk pipe host 2 host cables 483ugen_load="NO" # USB generic device, if all else fails ... 484ucycom_load="NO" # Cyprus USB serial adapters 485ufm_load="NO" # Fm Radio 486uhid_load="NO" # Human Interface Devices 487ukbd_load="NO" # Keyboard 488ulpt_load="NO" # Printer 489ums_load="NO" # Mouse 490umass_load="NO" # Mass Storage Devices 491umct_load="NO" # Magic Control Technology USB-RS232 492umodem_load="NO" # Modems 493uplcom_load="NO" # Prolific USB serial adapters 494urio_load="NO" # Rio MP3 players 495uvisor_load="NO" # PalmOS based PDAs 496if_aue_load="NO" # ADMtek USB ethernet 497if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet 498if_cdce_load="NO" # Ethernet over USB (CDC) 499if_cue_load="NO" # CATC USB ethernet 500if_kue_load="NO" # Kawasaki LSI USB ethernet 501if_rae_load="NO" # Realtek RTL8150 USB adapter. 502if_rum_load="NO" # Ralink USB 802.11 wireless adapter 503if_uath_load="NO" # Atheros AR5523 wireless adapter 504if_run_load="NO" # Ralink USB 802.11 wireless adapter 505if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter 506if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter 507snd_uaudio_load="NO" # USB audio 508 509 510############################################################## 511### Other modules ########################################## 512############################################################## 513 514aio_load="NO" # Asynchronous I/O 515bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card 516ispfw_load="NO" # Qlogic ISP Firmware 517agp_load="NO" # agp module 518accf_data_load="NO" # Wait for data accept filter 519accf_dns_load="NO" # Wait for full DNS request accept filter 520accf_http_load="NO" # Wait for full HTTP request accept filter 521ppi_load="NO" # Interface to ppbus parallel 'geek' port 522pps_load="NO" # Pulse per second devices 523puc_load="NO" # PCI "Universal" Communications driver 524random_load="NO" # Random device 525speaker_load="NO" # AT speaker module 526coretemp_load="NO" # Intel Core CPU temperature monitor 527vkbd_load="NO" # Virtual AT keyboard interface 528vpd_load="NO" # Vital Product Data kernel interface 529vpo_load="NO" # Parallel to SCSI interface driver 530amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor 531tpm_load="NO" # Trusted Platform Module 532wbwd_load="NO" # Winbond watchdog 533 534 535############################################################## 536### ACPI settings ########################################## 537############################################################## 538 539acpi_dsdt_load="NO" # DSDT Overriding 540acpi_dsdt_type="acpi_dsdt" # Don't change this 541acpi_dsdt_name="/boot/acpi_dsdt.aml" 542 # Override DSDT in BIOS by this file 543acpi_video_load="NO" # Load the ACPI video extension driver 544 545 546############################################################## 547### TrustedBSD MAC settings ################################ 548############################################################## 549 550mac_biba_load="NO" # Biba MAC policy 551mac_bsdextended_load="NO" # BSD/extended MAC policy 552mac_ifoff="NO" # Interface silencing policy 553mac_mls_load="NO" # MLS MAC policy 554mac_none_load="NO" # Null MAC policy 555mac_partition_load="NO" # Partition MAC policy 556mac_seeotheruids_load="NO" # UID visbility MAC policy 557 558 559############################################################## 560### Module loading syntax example ########################## 561############################################################## 562 563#module_load="YES" # loads module "module" 564#module_name="realname" # uses "realname" instead of "module" 565#module_type="type" # passes "-t type" to load 566#module_flags="flags" # passes "flags" to the module 567#module_before="cmd" # executes "cmd" before loading the module 568#module_after="cmd" # executes "cmd" after loading the module 569#module_error="cmd" # executes "cmd" if load fails 570