1/*- 2 * Copyright (c) 2013 Ruslan Bukin <br@bsdpad.com> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27/* 28 * Vybrid Family Universal Serial Bus (USB) Controller 29 * Chapter 44-45, Vybrid Reference Manual, Rev. 5, 07/2013 30 */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD: releng/11.0/sys/arm/freescale/vybrid/vf_ehci.c 294989 2016-01-28 14:11:59Z mmel $"); 34 35#include "opt_bus.h" 36 37#include <sys/param.h> 38#include <sys/systm.h> 39#include <sys/kernel.h> 40#include <sys/module.h> 41#include <sys/bus.h> 42#include <sys/condvar.h> 43#include <sys/rman.h> 44#include <sys/gpio.h> 45 46#include <dev/ofw/ofw_bus.h> 47#include <dev/ofw/ofw_bus_subr.h> 48 49#include <dev/usb/usb.h> 50#include <dev/usb/usbdi.h> 51#include <dev/usb/usb_busdma.h> 52#include <dev/usb/usb_process.h> 53#include <dev/usb/usb_controller.h> 54#include <dev/usb/usb_bus.h> 55#include <dev/usb/controller/ehci.h> 56#include <dev/usb/controller/ehcireg.h> 57 58#include <dev/fdt/fdt_common.h> 59 60#include <machine/bus.h> 61#include <machine/resource.h> 62 63#include "gpio_if.h" 64#include "opt_platform.h" 65 66#define ENUTMILEVEL3 (1 << 15) 67#define ENUTMILEVEL2 (1 << 14) 68 69#define GPIO_USB_PWR 134 70 71#define USB_ID 0x000 /* Identification register */ 72#define USB_HWGENERAL 0x004 /* Hardware General */ 73#define USB_HWHOST 0x008 /* Host Hardware Parameters */ 74#define USB_HWDEVICE 0x00C /* Device Hardware Parameters */ 75#define USB_HWTXBUF 0x010 /* TX Buffer Hardware Parameters */ 76#define USB_HWRXBUF 0x014 /* RX Buffer Hardware Parameters */ 77#define USB_HCSPARAMS 0x104 /* Host Controller Structural Parameters */ 78 79#define USBPHY_PWD 0x00 /* PHY Power-Down Register */ 80#define USBPHY_PWD_SET 0x04 /* PHY Power-Down Register */ 81#define USBPHY_PWD_CLR 0x08 /* PHY Power-Down Register */ 82#define USBPHY_PWD_TOG 0x0C /* PHY Power-Down Register */ 83#define USBPHY_TX 0x10 /* PHY Transmitter Control Register */ 84#define USBPHY_RX 0x20 /* PHY Receiver Control Register */ 85#define USBPHY_RX_SET 0x24 /* PHY Receiver Control Register */ 86#define USBPHY_RX_CLR 0x28 /* PHY Receiver Control Register */ 87#define USBPHY_RX_TOG 0x2C /* PHY Receiver Control Register */ 88#define USBPHY_CTRL 0x30 /* PHY General Control Register */ 89#define USBPHY_CTRL_SET 0x34 /* PHY General Control Register */ 90#define USBPHY_CTRL_CLR 0x38 /* PHY General Control Register */ 91#define USBPHY_CTRL_TOG 0x3C /* PHY General Control Register */ 92#define USBPHY_STATUS 0x40 /* PHY Status Register */ 93#define USBPHY_DEBUG 0x50 /* PHY Debug Register */ 94#define USBPHY_DEBUG_SET 0x54 /* PHY Debug Register */ 95#define USBPHY_DEBUG_CLR 0x58 /* PHY Debug Register */ 96#define USBPHY_DEBUG_TOG 0x5C /* PHY Debug Register */ 97#define USBPHY_DEBUG0_STATUS 0x60 /* UTMI Debug Status Register 0 */ 98#define USBPHY_DEBUG1 0x70 /* UTMI Debug Status Register 1 */ 99#define USBPHY_DEBUG1_SET 0x74 /* UTMI Debug Status Register 1 */ 100#define USBPHY_DEBUG1_CLR 0x78 /* UTMI Debug Status Register 1 */ 101#define USBPHY_DEBUG1_TOG 0x7C /* UTMI Debug Status Register 1 */ 102#define USBPHY_VERSION 0x80 /* UTMI RTL Version */ 103#define USBPHY_IP 0x90 /* PHY IP Block Register */ 104#define USBPHY_IP_SET 0x94 /* PHY IP Block Register */ 105#define USBPHY_IP_CLR 0x98 /* PHY IP Block Register */ 106#define USBPHY_IP_TOG 0x9C /* PHY IP Block Register */ 107 108#define USBPHY_CTRL_SFTRST (1U << 31) 109#define USBPHY_CTRL_CLKGATE (1 << 30) 110#define USBPHY_DEBUG_CLKGATE (1 << 30) 111 112#define PHY_READ4(_sc, _reg) \ 113 bus_space_read_4(_sc->bst_phy, _sc->bsh_phy, _reg) 114#define PHY_WRITE4(_sc, _reg, _val) \ 115 bus_space_write_4(_sc->bst_phy, _sc->bsh_phy, _reg, _val) 116 117#define USBC_READ4(_sc, _reg) \ 118 bus_space_read_4(_sc->bst_usbc, _sc->bsh_usbc, _reg) 119#define USBC_WRITE4(_sc, _reg, _val) \ 120 bus_space_write_4(_sc->bst_usbc, _sc->bsh_usbc, _reg, _val) 121 122/* Forward declarations */ 123static int vybrid_ehci_attach(device_t dev); 124static int vybrid_ehci_detach(device_t dev); 125static int vybrid_ehci_probe(device_t dev); 126 127struct vybrid_ehci_softc { 128 ehci_softc_t base; 129 device_t dev; 130 struct resource *res[6]; 131 bus_space_tag_t bst_phy; 132 bus_space_handle_t bsh_phy; 133 bus_space_tag_t bst_usbc; 134 bus_space_handle_t bsh_usbc; 135}; 136 137static struct resource_spec vybrid_ehci_spec[] = { 138 { SYS_RES_MEMORY, 0, RF_ACTIVE }, 139 { SYS_RES_MEMORY, 1, RF_ACTIVE }, 140 { SYS_RES_MEMORY, 2, RF_ACTIVE }, 141 { SYS_RES_IRQ, 0, RF_ACTIVE }, 142 { -1, 0 } 143}; 144 145static device_method_t ehci_methods[] = { 146 /* Device interface */ 147 DEVMETHOD(device_probe, vybrid_ehci_probe), 148 DEVMETHOD(device_attach, vybrid_ehci_attach), 149 DEVMETHOD(device_detach, vybrid_ehci_detach), 150 DEVMETHOD(device_suspend, bus_generic_suspend), 151 DEVMETHOD(device_resume, bus_generic_resume), 152 DEVMETHOD(device_shutdown, bus_generic_shutdown), 153 154 /* Bus interface */ 155 DEVMETHOD(bus_print_child, bus_generic_print_child), 156 157 { 0, 0 } 158}; 159 160/* kobj_class definition */ 161static driver_t ehci_driver = { 162 "ehci", 163 ehci_methods, 164 sizeof(ehci_softc_t) 165}; 166 167static devclass_t ehci_devclass; 168 169DRIVER_MODULE(ehci, simplebus, ehci_driver, ehci_devclass, 0, 0); 170MODULE_DEPEND(ehci, usb, 1, 1, 1); 171 172static void 173vybrid_ehci_post_reset(struct ehci_softc *ehci_softc) 174{ 175 uint32_t usbmode; 176 177 /* Force HOST mode */ 178 usbmode = EOREAD4(ehci_softc, EHCI_USBMODE_NOLPM); 179 usbmode &= ~EHCI_UM_CM; 180 usbmode |= EHCI_UM_CM_HOST; 181 EOWRITE4(ehci_softc, EHCI_USBMODE_NOLPM, usbmode); 182} 183 184/* 185 * Public methods 186 */ 187static int 188vybrid_ehci_probe(device_t dev) 189{ 190 191 if (!ofw_bus_status_okay(dev)) 192 return (ENXIO); 193 194 if (ofw_bus_is_compatible(dev, "fsl,mvf600-usb-ehci") == 0) 195 return (ENXIO); 196 197 device_set_desc(dev, "Vybrid Family integrated USB controller"); 198 return (BUS_PROBE_DEFAULT); 199} 200 201static int 202phy_init(struct vybrid_ehci_softc *esc) 203{ 204 device_t sc_gpio_dev; 205 int reg; 206 207 /* Reset phy */ 208 reg = PHY_READ4(esc, USBPHY_CTRL); 209 reg |= (USBPHY_CTRL_SFTRST); 210 PHY_WRITE4(esc, USBPHY_CTRL, reg); 211 212 /* Minimum reset time */ 213 DELAY(10000); 214 215 reg &= ~(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE); 216 PHY_WRITE4(esc, USBPHY_CTRL, reg); 217 218 reg = (ENUTMILEVEL2 | ENUTMILEVEL3); 219 PHY_WRITE4(esc, USBPHY_CTRL_SET, reg); 220 221 /* Get the GPIO device, we need this to give power to USB */ 222 sc_gpio_dev = devclass_get_device(devclass_find("gpio"), 0); 223 if (sc_gpio_dev == NULL) { 224 device_printf(esc->dev, "Error: failed to get the GPIO dev\n"); 225 return (1); 226 } 227 228 /* Give power to USB */ 229 GPIO_PIN_SETFLAGS(sc_gpio_dev, GPIO_USB_PWR, GPIO_PIN_OUTPUT); 230 GPIO_PIN_SET(sc_gpio_dev, GPIO_USB_PWR, GPIO_PIN_HIGH); 231 232 /* Power up PHY */ 233 PHY_WRITE4(esc, USBPHY_PWD, 0x00); 234 235 /* Ungate clocks */ 236 reg = PHY_READ4(esc, USBPHY_DEBUG); 237 reg &= ~(USBPHY_DEBUG_CLKGATE); 238 PHY_WRITE4(esc, USBPHY_DEBUG, reg); 239 240#if 0 241 printf("USBPHY_CTRL == 0x%08x\n", 242 PHY_READ4(esc, USBPHY_CTRL)); 243 printf("USBPHY_IP == 0x%08x\n", 244 PHY_READ4(esc, USBPHY_IP)); 245 printf("USBPHY_STATUS == 0x%08x\n", 246 PHY_READ4(esc, USBPHY_STATUS)); 247 printf("USBPHY_DEBUG == 0x%08x\n", 248 PHY_READ4(esc, USBPHY_DEBUG)); 249 printf("USBPHY_DEBUG0_STATUS == 0x%08x\n", 250 PHY_READ4(esc, USBPHY_DEBUG0_STATUS)); 251 printf("USBPHY_DEBUG1 == 0x%08x\n", 252 PHY_READ4(esc, USBPHY_DEBUG1)); 253#endif 254 255 return (0); 256} 257 258static int 259vybrid_ehci_attach(device_t dev) 260{ 261 struct vybrid_ehci_softc *esc; 262 ehci_softc_t *sc; 263 bus_space_handle_t bsh; 264 int err; 265 int reg; 266 267 esc = device_get_softc(dev); 268 esc->dev = dev; 269 270 sc = &esc->base; 271 sc->sc_bus.parent = dev; 272 sc->sc_bus.devices = sc->sc_devices; 273 sc->sc_bus.devices_max = EHCI_MAX_DEVICES; 274 sc->sc_bus.dma_bits = 32; 275 276 if (bus_alloc_resources(dev, vybrid_ehci_spec, esc->res)) { 277 device_printf(dev, "could not allocate resources\n"); 278 return (ENXIO); 279 } 280 281 /* EHCI registers */ 282 sc->sc_io_tag = rman_get_bustag(esc->res[0]); 283 bsh = rman_get_bushandle(esc->res[0]); 284 sc->sc_io_size = rman_get_size(esc->res[0]); 285 286 esc->bst_usbc = rman_get_bustag(esc->res[1]); 287 esc->bsh_usbc = rman_get_bushandle(esc->res[1]); 288 289 esc->bst_phy = rman_get_bustag(esc->res[2]); 290 esc->bsh_phy = rman_get_bushandle(esc->res[2]); 291 292 /* get all DMA memory */ 293 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(dev), 294 &ehci_iterate_hw_softc)) 295 return (ENXIO); 296 297#if 0 298 printf("USBx_HCSPARAMS is 0x%08x\n", 299 bus_space_read_4(sc->sc_io_tag, bsh, USB_HCSPARAMS)); 300 printf("USB_ID == 0x%08x\n", 301 bus_space_read_4(sc->sc_io_tag, bsh, USB_ID)); 302 printf("USB_HWGENERAL == 0x%08x\n", 303 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWGENERAL)); 304 printf("USB_HWHOST == 0x%08x\n", 305 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWHOST)); 306 printf("USB_HWDEVICE == 0x%08x\n", 307 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWDEVICE)); 308 printf("USB_HWTXBUF == 0x%08x\n", 309 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWTXBUF)); 310 printf("USB_HWRXBUF == 0x%08x\n", 311 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWRXBUF)); 312#endif 313 314 if (phy_init(esc)) { 315 device_printf(dev, "Could not setup PHY\n"); 316 return (1); 317 } 318 319 /* 320 * Set handle to USB related registers subregion used by 321 * generic EHCI driver. 322 */ 323 err = bus_space_subregion(sc->sc_io_tag, bsh, 0x100, 324 sc->sc_io_size, &sc->sc_io_hdl); 325 if (err != 0) 326 return (ENXIO); 327 328 /* Setup interrupt handler */ 329 err = bus_setup_intr(dev, esc->res[3], INTR_TYPE_BIO | INTR_MPSAFE, 330 NULL, (driver_intr_t *)ehci_interrupt, sc, 331 &sc->sc_intr_hdl); 332 if (err) { 333 device_printf(dev, "Could not setup irq, " 334 "%d\n", err); 335 return (1); 336 } 337 338 /* Add USB device */ 339 sc->sc_bus.bdev = device_add_child(dev, "usbus", -1); 340 if (!sc->sc_bus.bdev) { 341 device_printf(dev, "Could not add USB device\n"); 342 err = bus_teardown_intr(dev, esc->res[5], 343 sc->sc_intr_hdl); 344 if (err) 345 device_printf(dev, "Could not tear down irq," 346 " %d\n", err); 347 return (1); 348 } 349 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 350 351 strlcpy(sc->sc_vendor, "Freescale", sizeof(sc->sc_vendor)); 352 353 /* Set host mode */ 354 reg = bus_space_read_4(sc->sc_io_tag, sc->sc_io_hdl, 0xA8); 355 reg |= 0x3; 356 bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, 0xA8, reg); 357 358 /* Set flags and callbacks*/ 359 sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM; 360 sc->sc_vendor_post_reset = vybrid_ehci_post_reset; 361 sc->sc_vendor_get_port_speed = ehci_get_port_speed_portsc; 362 363 err = ehci_init(sc); 364 if (!err) { 365 sc->sc_flags |= EHCI_SCFLG_DONEINIT; 366 err = device_probe_and_attach(sc->sc_bus.bdev); 367 } else { 368 device_printf(dev, "USB init failed err=%d\n", err); 369 370 device_delete_child(dev, sc->sc_bus.bdev); 371 sc->sc_bus.bdev = NULL; 372 373 err = bus_teardown_intr(dev, esc->res[5], 374 sc->sc_intr_hdl); 375 if (err) 376 device_printf(dev, "Could not tear down irq," 377 " %d\n", err); 378 return (1); 379 } 380 return (0); 381} 382 383static int 384vybrid_ehci_detach(device_t dev) 385{ 386 struct vybrid_ehci_softc *esc; 387 ehci_softc_t *sc; 388 int err; 389 390 esc = device_get_softc(dev); 391 sc = &esc->base; 392 393 if (sc->sc_flags & EHCI_SCFLG_DONEINIT) 394 return (0); 395 396 /* 397 * only call ehci_detach() after ehci_init() 398 */ 399 if (sc->sc_flags & EHCI_SCFLG_DONEINIT) { 400 ehci_detach(sc); 401 sc->sc_flags &= ~EHCI_SCFLG_DONEINIT; 402 } 403 404 /* 405 * Disable interrupts that might have been switched on in 406 * ehci_init. 407 */ 408 if (sc->sc_io_tag && sc->sc_io_hdl) 409 bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, 410 EHCI_USBINTR, 0); 411 412 if (esc->res[5] && sc->sc_intr_hdl) { 413 err = bus_teardown_intr(dev, esc->res[5], 414 sc->sc_intr_hdl); 415 if (err) { 416 device_printf(dev, "Could not tear down irq," 417 " %d\n", err); 418 return (err); 419 } 420 sc->sc_intr_hdl = NULL; 421 } 422 423 if (sc->sc_bus.bdev) { 424 device_delete_child(dev, sc->sc_bus.bdev); 425 sc->sc_bus.bdev = NULL; 426 } 427 428 /* During module unload there are lots of children leftover */ 429 device_delete_children(dev); 430 431 bus_release_resources(dev, vybrid_ehci_spec, esc->res); 432 433 return (0); 434} 435