1/*-
2 * Copyright 2003-2011 Netlogic Microsystems (Netlogic). All rights
3 * reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in
13 *    the documentation and/or other materials provided with the
14 *    distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY Netlogic Microsystems ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE
20 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
26 * THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * NETLOGIC_BSD */
29
30#include <sys/cdefs.h>
31__FBSDID("$FreeBSD$");
32#include <sys/types.h>
33#include <sys/systm.h>
34#include <sys/param.h>
35#include <sys/kernel.h>
36
37#include <mips/nlm/hal/haldefs.h>
38#include <mips/nlm/hal/iomap.h>
39#include <mips/nlm/hal/usb.h>
40
41#include <mips/nlm/xlp.h>
42
43
44static void
45nlm_usb_intr_en(int node, int port)
46{
47	uint32_t val;
48	uint64_t port_addr;
49
50	port_addr = nlm_get_usb_regbase(node, port);
51	val = nlm_read_usb_reg(port_addr, USB_INT_EN);
52	val = USB_CTRL_INTERRUPT_EN  | USB_OHCI_INTERRUPT_EN |
53		USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN  |
54		USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
55        nlm_write_usb_reg(port_addr, USB_INT_EN, val);
56}
57
58static void
59nlm_usb_hw_reset(int node, int port)
60{
61	uint64_t port_addr;
62	uint32_t val;
63
64	/* reset USB phy */
65	port_addr = nlm_get_usb_regbase(node, port);
66	val = nlm_read_usb_reg(port_addr, USB_PHY_0);
67	val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
68	nlm_write_usb_reg(port_addr, USB_PHY_0, val);
69
70	DELAY(100);
71	val = nlm_read_usb_reg(port_addr, USB_CTL_0);
72	val &= ~(USB_CONTROLLER_RESET);
73	val |= 0x4;
74	nlm_write_usb_reg(port_addr, USB_CTL_0, val);
75}
76
77static void
78nlm_usb_init(void)
79{
80	/* XXX: should be checking if these are in Device mode here */
81	printf("Initialize USB Interface\n");
82	nlm_usb_hw_reset(0, 0);
83	nlm_usb_hw_reset(0, 3);
84
85	/* Enable PHY interrupts */
86	nlm_usb_intr_en(0, 0);
87	nlm_usb_intr_en(0, 3);
88}
89
90SYSINIT(nlm_usb_init, SI_SUB_CPU, SI_ORDER_MIDDLE,
91    nlm_usb_init, NULL);
92