1#
2# $FreeBSD$
3#
4
5# arge0 mdio bus
6hint.argemdio.0.at="nexus0"
7hint.argemdio.0.maddr=0x19000000
8hint.argemdio.0.msize=0x1000
9hint.argemdio.0.order=0
10
11# Uncomment this hint for RS (not PRO)
12# PHY20 = 1 << 20
13hint.arge.0.phymask=0x100000
14hint.arge.0.mdio=mdioproxy1	# .. off of the switch mdiobus
15
16# should be 100 for RS 
17hint.arge.1.media=100
18hint.arge.1.fduplex=1
19hint.arge.1.phymask=0x0
20hint.arge.1.mdio=mdioproxy1	# .. off of the switch mdiobus
21
22# ukswitch
23hint.ukswitch.0.at="mdio0"
24hint.ukswitch.0.phymask=0x30000
25
26# Don't flip on anything that isn't already enabled.
27# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
28# not used here.
29hint.gpio.0.function_set=0x00000000
30hint.gpio.0.function_clear=0x00000000
31
32# These are the GPIO LEDs and buttons which can be software controlled.
33hint.gpio.0.pinmask=0x000000ff
34
35# GPIO 0: Pin 1
36# GPIO 1: Pin 2
37# GPIO 2: RF LED
38# GPIO 3: Pin 3
39# GPIO 4: Pin 4
40# GPIO 5: Pin 5
41# GPIO 6: Pin 6
42# GPIO 7: Pin 7
43
44# RF led
45hint.gpioled.0.at="gpiobus0"
46hint.gpioled.0.name="rf"
47# pin 2
48hint.gpioled.0.pins=0x0004
49