e1000_api.c revision 215789
1/****************************************************************************** 2 3 Copyright (c) 2001-2010, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32******************************************************************************/ 33/*$FreeBSD: head/sys/dev/e1000/e1000_api.c 215789 2010-11-24 01:13:55Z jfv $*/ 34 35#include "e1000_api.h" 36 37/** 38 * e1000_init_mac_params - Initialize MAC function pointers 39 * @hw: pointer to the HW structure 40 * 41 * This function initializes the function pointers for the MAC 42 * set of functions. Called by drivers or by e1000_setup_init_funcs. 43 **/ 44s32 e1000_init_mac_params(struct e1000_hw *hw) 45{ 46 s32 ret_val = E1000_SUCCESS; 47 48 if (hw->mac.ops.init_params) { 49 ret_val = hw->mac.ops.init_params(hw); 50 if (ret_val) { 51 DEBUGOUT("MAC Initialization Error\n"); 52 goto out; 53 } 54 } else { 55 DEBUGOUT("mac.init_mac_params was NULL\n"); 56 ret_val = -E1000_ERR_CONFIG; 57 } 58 59out: 60 return ret_val; 61} 62 63/** 64 * e1000_init_nvm_params - Initialize NVM function pointers 65 * @hw: pointer to the HW structure 66 * 67 * This function initializes the function pointers for the NVM 68 * set of functions. Called by drivers or by e1000_setup_init_funcs. 69 **/ 70s32 e1000_init_nvm_params(struct e1000_hw *hw) 71{ 72 s32 ret_val = E1000_SUCCESS; 73 74 if (hw->nvm.ops.init_params) { 75 ret_val = hw->nvm.ops.init_params(hw); 76 if (ret_val) { 77 DEBUGOUT("NVM Initialization Error\n"); 78 goto out; 79 } 80 } else { 81 DEBUGOUT("nvm.init_nvm_params was NULL\n"); 82 ret_val = -E1000_ERR_CONFIG; 83 } 84 85out: 86 return ret_val; 87} 88 89/** 90 * e1000_init_phy_params - Initialize PHY function pointers 91 * @hw: pointer to the HW structure 92 * 93 * This function initializes the function pointers for the PHY 94 * set of functions. Called by drivers or by e1000_setup_init_funcs. 95 **/ 96s32 e1000_init_phy_params(struct e1000_hw *hw) 97{ 98 s32 ret_val = E1000_SUCCESS; 99 100 if (hw->phy.ops.init_params) { 101 ret_val = hw->phy.ops.init_params(hw); 102 if (ret_val) { 103 DEBUGOUT("PHY Initialization Error\n"); 104 goto out; 105 } 106 } else { 107 DEBUGOUT("phy.init_phy_params was NULL\n"); 108 ret_val = -E1000_ERR_CONFIG; 109 } 110 111out: 112 return ret_val; 113} 114 115/** 116 * e1000_init_mbx_params - Initialize mailbox function pointers 117 * @hw: pointer to the HW structure 118 * 119 * This function initializes the function pointers for the PHY 120 * set of functions. Called by drivers or by e1000_setup_init_funcs. 121 **/ 122s32 e1000_init_mbx_params(struct e1000_hw *hw) 123{ 124 s32 ret_val = E1000_SUCCESS; 125 126 if (hw->mbx.ops.init_params) { 127 ret_val = hw->mbx.ops.init_params(hw); 128 if (ret_val) { 129 DEBUGOUT("Mailbox Initialization Error\n"); 130 goto out; 131 } 132 } else { 133 DEBUGOUT("mbx.init_mbx_params was NULL\n"); 134 ret_val = -E1000_ERR_CONFIG; 135 } 136 137out: 138 return ret_val; 139} 140 141/** 142 * e1000_set_mac_type - Sets MAC type 143 * @hw: pointer to the HW structure 144 * 145 * This function sets the mac type of the adapter based on the 146 * device ID stored in the hw structure. 147 * MUST BE FIRST FUNCTION CALLED (explicitly or through 148 * e1000_setup_init_funcs()). 149 **/ 150s32 e1000_set_mac_type(struct e1000_hw *hw) 151{ 152 struct e1000_mac_info *mac = &hw->mac; 153 s32 ret_val = E1000_SUCCESS; 154 155 DEBUGFUNC("e1000_set_mac_type"); 156 157 switch (hw->device_id) { 158 case E1000_DEV_ID_82542: 159 mac->type = e1000_82542; 160 break; 161 case E1000_DEV_ID_82543GC_FIBER: 162 case E1000_DEV_ID_82543GC_COPPER: 163 mac->type = e1000_82543; 164 break; 165 case E1000_DEV_ID_82544EI_COPPER: 166 case E1000_DEV_ID_82544EI_FIBER: 167 case E1000_DEV_ID_82544GC_COPPER: 168 case E1000_DEV_ID_82544GC_LOM: 169 mac->type = e1000_82544; 170 break; 171 case E1000_DEV_ID_82540EM: 172 case E1000_DEV_ID_82540EM_LOM: 173 case E1000_DEV_ID_82540EP: 174 case E1000_DEV_ID_82540EP_LOM: 175 case E1000_DEV_ID_82540EP_LP: 176 mac->type = e1000_82540; 177 break; 178 case E1000_DEV_ID_82545EM_COPPER: 179 case E1000_DEV_ID_82545EM_FIBER: 180 mac->type = e1000_82545; 181 break; 182 case E1000_DEV_ID_82545GM_COPPER: 183 case E1000_DEV_ID_82545GM_FIBER: 184 case E1000_DEV_ID_82545GM_SERDES: 185 mac->type = e1000_82545_rev_3; 186 break; 187 case E1000_DEV_ID_82546EB_COPPER: 188 case E1000_DEV_ID_82546EB_FIBER: 189 case E1000_DEV_ID_82546EB_QUAD_COPPER: 190 mac->type = e1000_82546; 191 break; 192 case E1000_DEV_ID_82546GB_COPPER: 193 case E1000_DEV_ID_82546GB_FIBER: 194 case E1000_DEV_ID_82546GB_SERDES: 195 case E1000_DEV_ID_82546GB_PCIE: 196 case E1000_DEV_ID_82546GB_QUAD_COPPER: 197 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: 198 mac->type = e1000_82546_rev_3; 199 break; 200 case E1000_DEV_ID_82541EI: 201 case E1000_DEV_ID_82541EI_MOBILE: 202 case E1000_DEV_ID_82541ER_LOM: 203 mac->type = e1000_82541; 204 break; 205 case E1000_DEV_ID_82541ER: 206 case E1000_DEV_ID_82541GI: 207 case E1000_DEV_ID_82541GI_LF: 208 case E1000_DEV_ID_82541GI_MOBILE: 209 mac->type = e1000_82541_rev_2; 210 break; 211 case E1000_DEV_ID_82547EI: 212 case E1000_DEV_ID_82547EI_MOBILE: 213 mac->type = e1000_82547; 214 break; 215 case E1000_DEV_ID_82547GI: 216 mac->type = e1000_82547_rev_2; 217 break; 218 case E1000_DEV_ID_82571EB_COPPER: 219 case E1000_DEV_ID_82571EB_FIBER: 220 case E1000_DEV_ID_82571EB_SERDES: 221 case E1000_DEV_ID_82571EB_SERDES_DUAL: 222 case E1000_DEV_ID_82571EB_SERDES_QUAD: 223 case E1000_DEV_ID_82571EB_QUAD_COPPER: 224 case E1000_DEV_ID_82571PT_QUAD_COPPER: 225 case E1000_DEV_ID_82571EB_QUAD_FIBER: 226 case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: 227 mac->type = e1000_82571; 228 break; 229 case E1000_DEV_ID_82572EI: 230 case E1000_DEV_ID_82572EI_COPPER: 231 case E1000_DEV_ID_82572EI_FIBER: 232 case E1000_DEV_ID_82572EI_SERDES: 233 mac->type = e1000_82572; 234 break; 235 case E1000_DEV_ID_82573E: 236 case E1000_DEV_ID_82573E_IAMT: 237 case E1000_DEV_ID_82573L: 238 mac->type = e1000_82573; 239 break; 240 case E1000_DEV_ID_82574L: 241 case E1000_DEV_ID_82574LA: 242 mac->type = e1000_82574; 243 break; 244 case E1000_DEV_ID_82583V: 245 mac->type = e1000_82583; 246 break; 247 case E1000_DEV_ID_80003ES2LAN_COPPER_DPT: 248 case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: 249 case E1000_DEV_ID_80003ES2LAN_COPPER_SPT: 250 case E1000_DEV_ID_80003ES2LAN_SERDES_SPT: 251 mac->type = e1000_80003es2lan; 252 break; 253 case E1000_DEV_ID_ICH8_IFE: 254 case E1000_DEV_ID_ICH8_IFE_GT: 255 case E1000_DEV_ID_ICH8_IFE_G: 256 case E1000_DEV_ID_ICH8_IGP_M: 257 case E1000_DEV_ID_ICH8_IGP_M_AMT: 258 case E1000_DEV_ID_ICH8_IGP_AMT: 259 case E1000_DEV_ID_ICH8_IGP_C: 260 case E1000_DEV_ID_ICH8_82567V_3: 261 mac->type = e1000_ich8lan; 262 break; 263 case E1000_DEV_ID_ICH9_IFE: 264 case E1000_DEV_ID_ICH9_IFE_GT: 265 case E1000_DEV_ID_ICH9_IFE_G: 266 case E1000_DEV_ID_ICH9_IGP_M: 267 case E1000_DEV_ID_ICH9_IGP_M_AMT: 268 case E1000_DEV_ID_ICH9_IGP_M_V: 269 case E1000_DEV_ID_ICH9_IGP_AMT: 270 case E1000_DEV_ID_ICH9_BM: 271 case E1000_DEV_ID_ICH9_IGP_C: 272 case E1000_DEV_ID_ICH10_R_BM_LM: 273 case E1000_DEV_ID_ICH10_R_BM_LF: 274 case E1000_DEV_ID_ICH10_R_BM_V: 275 mac->type = e1000_ich9lan; 276 break; 277 case E1000_DEV_ID_ICH10_D_BM_LM: 278 case E1000_DEV_ID_ICH10_D_BM_LF: 279 case E1000_DEV_ID_ICH10_D_BM_V: 280 case E1000_DEV_ID_ICH10_HANKSVILLE: 281 mac->type = e1000_ich10lan; 282 break; 283 case E1000_DEV_ID_PCH_D_HV_DM: 284 case E1000_DEV_ID_PCH_D_HV_DC: 285 case E1000_DEV_ID_PCH_M_HV_LM: 286 case E1000_DEV_ID_PCH_M_HV_LC: 287 mac->type = e1000_pchlan; 288 break; 289 case E1000_DEV_ID_PCH2_LV_LM: 290 case E1000_DEV_ID_PCH2_LV_V: 291 mac->type = e1000_pch2lan; 292 break; 293 case E1000_DEV_ID_82575EB_COPPER: 294 case E1000_DEV_ID_82575EB_FIBER_SERDES: 295 case E1000_DEV_ID_82575GB_QUAD_COPPER: 296 case E1000_DEV_ID_82575GB_QUAD_COPPER_PM: 297 mac->type = e1000_82575; 298 break; 299 case E1000_DEV_ID_82576: 300 case E1000_DEV_ID_82576_FIBER: 301 case E1000_DEV_ID_82576_SERDES: 302 case E1000_DEV_ID_82576_QUAD_COPPER: 303 case E1000_DEV_ID_82576_QUAD_COPPER_ET2: 304 case E1000_DEV_ID_82576_NS: 305 case E1000_DEV_ID_82576_NS_SERDES: 306 case E1000_DEV_ID_82576_SERDES_QUAD: 307 mac->type = e1000_82576; 308 break; 309 case E1000_DEV_ID_82580_COPPER: 310 case E1000_DEV_ID_82580_FIBER: 311 case E1000_DEV_ID_82580_SERDES: 312 case E1000_DEV_ID_82580_SGMII: 313 case E1000_DEV_ID_82580_COPPER_DUAL: 314 case E1000_DEV_ID_82580_QUAD_FIBER: 315 case E1000_DEV_ID_DH89XXCC_SGMII: 316 case E1000_DEV_ID_DH89XXCC_SERDES: 317 mac->type = e1000_82580; 318 break; 319 case E1000_DEV_ID_82576_VF: 320 mac->type = e1000_vfadapt; 321 break; 322 default: 323 /* Should never have loaded on this device */ 324 ret_val = -E1000_ERR_MAC_INIT; 325 break; 326 } 327 328 return ret_val; 329} 330 331/** 332 * e1000_setup_init_funcs - Initializes function pointers 333 * @hw: pointer to the HW structure 334 * @init_device: TRUE will initialize the rest of the function pointers 335 * getting the device ready for use. FALSE will only set 336 * MAC type and the function pointers for the other init 337 * functions. Passing FALSE will not generate any hardware 338 * reads or writes. 339 * 340 * This function must be called by a driver in order to use the rest 341 * of the 'shared' code files. Called by drivers only. 342 **/ 343s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) 344{ 345 s32 ret_val; 346 347 /* Can't do much good without knowing the MAC type. */ 348 ret_val = e1000_set_mac_type(hw); 349 if (ret_val) { 350 DEBUGOUT("ERROR: MAC type could not be set properly.\n"); 351 goto out; 352 } 353 354 if (!hw->hw_addr) { 355 DEBUGOUT("ERROR: Registers not mapped\n"); 356 ret_val = -E1000_ERR_CONFIG; 357 goto out; 358 } 359 360 /* 361 * Init function pointers to generic implementations. We do this first 362 * allowing a driver module to override it afterward. 363 */ 364 e1000_init_mac_ops_generic(hw); 365 e1000_init_phy_ops_generic(hw); 366 e1000_init_nvm_ops_generic(hw); 367 e1000_init_mbx_ops_generic(hw); 368 369 /* 370 * Set up the init function pointers. These are functions within the 371 * adapter family file that sets up function pointers for the rest of 372 * the functions in that family. 373 */ 374 switch (hw->mac.type) { 375 case e1000_82542: 376 e1000_init_function_pointers_82542(hw); 377 break; 378 case e1000_82543: 379 case e1000_82544: 380 e1000_init_function_pointers_82543(hw); 381 break; 382 case e1000_82540: 383 case e1000_82545: 384 case e1000_82545_rev_3: 385 case e1000_82546: 386 case e1000_82546_rev_3: 387 e1000_init_function_pointers_82540(hw); 388 break; 389 case e1000_82541: 390 case e1000_82541_rev_2: 391 case e1000_82547: 392 case e1000_82547_rev_2: 393 e1000_init_function_pointers_82541(hw); 394 break; 395 case e1000_82571: 396 case e1000_82572: 397 case e1000_82573: 398 case e1000_82574: 399 case e1000_82583: 400 e1000_init_function_pointers_82571(hw); 401 break; 402 case e1000_80003es2lan: 403 e1000_init_function_pointers_80003es2lan(hw); 404 break; 405 case e1000_ich8lan: 406 case e1000_ich9lan: 407 case e1000_ich10lan: 408 case e1000_pchlan: 409 case e1000_pch2lan: 410 e1000_init_function_pointers_ich8lan(hw); 411 break; 412 case e1000_82575: 413 case e1000_82576: 414 case e1000_82580: 415 e1000_init_function_pointers_82575(hw); 416 break; 417 case e1000_vfadapt: 418 e1000_init_function_pointers_vf(hw); 419 break; 420 default: 421 DEBUGOUT("Hardware not supported\n"); 422 ret_val = -E1000_ERR_CONFIG; 423 break; 424 } 425 426 /* 427 * Initialize the rest of the function pointers. These require some 428 * register reads/writes in some cases. 429 */ 430 if (!(ret_val) && init_device) { 431 ret_val = e1000_init_mac_params(hw); 432 if (ret_val) 433 goto out; 434 435 ret_val = e1000_init_nvm_params(hw); 436 if (ret_val) 437 goto out; 438 439 ret_val = e1000_init_phy_params(hw); 440 if (ret_val) 441 goto out; 442 443 ret_val = e1000_init_mbx_params(hw); 444 if (ret_val) 445 goto out; 446 } 447 448out: 449 return ret_val; 450} 451 452/** 453 * e1000_get_bus_info - Obtain bus information for adapter 454 * @hw: pointer to the HW structure 455 * 456 * This will obtain information about the HW bus for which the 457 * adapter is attached and stores it in the hw structure. This is a 458 * function pointer entry point called by drivers. 459 **/ 460s32 e1000_get_bus_info(struct e1000_hw *hw) 461{ 462 if (hw->mac.ops.get_bus_info) 463 return hw->mac.ops.get_bus_info(hw); 464 465 return E1000_SUCCESS; 466} 467 468/** 469 * e1000_clear_vfta - Clear VLAN filter table 470 * @hw: pointer to the HW structure 471 * 472 * This clears the VLAN filter table on the adapter. This is a function 473 * pointer entry point called by drivers. 474 **/ 475void e1000_clear_vfta(struct e1000_hw *hw) 476{ 477 if (hw->mac.ops.clear_vfta) 478 hw->mac.ops.clear_vfta(hw); 479} 480 481/** 482 * e1000_write_vfta - Write value to VLAN filter table 483 * @hw: pointer to the HW structure 484 * @offset: the 32-bit offset in which to write the value to. 485 * @value: the 32-bit value to write at location offset. 486 * 487 * This writes a 32-bit value to a 32-bit offset in the VLAN filter 488 * table. This is a function pointer entry point called by drivers. 489 **/ 490void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) 491{ 492 if (hw->mac.ops.write_vfta) 493 hw->mac.ops.write_vfta(hw, offset, value); 494} 495 496/** 497 * e1000_update_mc_addr_list - Update Multicast addresses 498 * @hw: pointer to the HW structure 499 * @mc_addr_list: array of multicast addresses to program 500 * @mc_addr_count: number of multicast addresses to program 501 * 502 * Updates the Multicast Table Array. 503 * The caller must have a packed mc_addr_list of multicast addresses. 504 **/ 505void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, 506 u32 mc_addr_count) 507{ 508 if (hw->mac.ops.update_mc_addr_list) 509 hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, 510 mc_addr_count); 511} 512 513/** 514 * e1000_force_mac_fc - Force MAC flow control 515 * @hw: pointer to the HW structure 516 * 517 * Force the MAC's flow control settings. Currently no func pointer exists 518 * and all implementations are handled in the generic version of this 519 * function. 520 **/ 521s32 e1000_force_mac_fc(struct e1000_hw *hw) 522{ 523 return e1000_force_mac_fc_generic(hw); 524} 525 526/** 527 * e1000_check_for_link - Check/Store link connection 528 * @hw: pointer to the HW structure 529 * 530 * This checks the link condition of the adapter and stores the 531 * results in the hw->mac structure. This is a function pointer entry 532 * point called by drivers. 533 **/ 534s32 e1000_check_for_link(struct e1000_hw *hw) 535{ 536 if (hw->mac.ops.check_for_link) 537 return hw->mac.ops.check_for_link(hw); 538 539 return -E1000_ERR_CONFIG; 540} 541 542/** 543 * e1000_check_mng_mode - Check management mode 544 * @hw: pointer to the HW structure 545 * 546 * This checks if the adapter has manageability enabled. 547 * This is a function pointer entry point called by drivers. 548 **/ 549bool e1000_check_mng_mode(struct e1000_hw *hw) 550{ 551 if (hw->mac.ops.check_mng_mode) 552 return hw->mac.ops.check_mng_mode(hw); 553 554 return FALSE; 555} 556 557/** 558 * e1000_mng_write_dhcp_info - Writes DHCP info to host interface 559 * @hw: pointer to the HW structure 560 * @buffer: pointer to the host interface 561 * @length: size of the buffer 562 * 563 * Writes the DHCP information to the host interface. 564 **/ 565s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) 566{ 567 return e1000_mng_write_dhcp_info_generic(hw, buffer, length); 568} 569 570/** 571 * e1000_reset_hw - Reset hardware 572 * @hw: pointer to the HW structure 573 * 574 * This resets the hardware into a known state. This is a function pointer 575 * entry point called by drivers. 576 **/ 577s32 e1000_reset_hw(struct e1000_hw *hw) 578{ 579 if (hw->mac.ops.reset_hw) 580 return hw->mac.ops.reset_hw(hw); 581 582 return -E1000_ERR_CONFIG; 583} 584 585/** 586 * e1000_init_hw - Initialize hardware 587 * @hw: pointer to the HW structure 588 * 589 * This inits the hardware readying it for operation. This is a function 590 * pointer entry point called by drivers. 591 **/ 592s32 e1000_init_hw(struct e1000_hw *hw) 593{ 594 if (hw->mac.ops.init_hw) 595 return hw->mac.ops.init_hw(hw); 596 597 return -E1000_ERR_CONFIG; 598} 599 600/** 601 * e1000_setup_link - Configures link and flow control 602 * @hw: pointer to the HW structure 603 * 604 * This configures link and flow control settings for the adapter. This 605 * is a function pointer entry point called by drivers. While modules can 606 * also call this, they probably call their own version of this function. 607 **/ 608s32 e1000_setup_link(struct e1000_hw *hw) 609{ 610 if (hw->mac.ops.setup_link) 611 return hw->mac.ops.setup_link(hw); 612 613 return -E1000_ERR_CONFIG; 614} 615 616/** 617 * e1000_get_speed_and_duplex - Returns current speed and duplex 618 * @hw: pointer to the HW structure 619 * @speed: pointer to a 16-bit value to store the speed 620 * @duplex: pointer to a 16-bit value to store the duplex. 621 * 622 * This returns the speed and duplex of the adapter in the two 'out' 623 * variables passed in. This is a function pointer entry point called 624 * by drivers. 625 **/ 626s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) 627{ 628 if (hw->mac.ops.get_link_up_info) 629 return hw->mac.ops.get_link_up_info(hw, speed, duplex); 630 631 return -E1000_ERR_CONFIG; 632} 633 634/** 635 * e1000_setup_led - Configures SW controllable LED 636 * @hw: pointer to the HW structure 637 * 638 * This prepares the SW controllable LED for use and saves the current state 639 * of the LED so it can be later restored. This is a function pointer entry 640 * point called by drivers. 641 **/ 642s32 e1000_setup_led(struct e1000_hw *hw) 643{ 644 if (hw->mac.ops.setup_led) 645 return hw->mac.ops.setup_led(hw); 646 647 return E1000_SUCCESS; 648} 649 650/** 651 * e1000_cleanup_led - Restores SW controllable LED 652 * @hw: pointer to the HW structure 653 * 654 * This restores the SW controllable LED to the value saved off by 655 * e1000_setup_led. This is a function pointer entry point called by drivers. 656 **/ 657s32 e1000_cleanup_led(struct e1000_hw *hw) 658{ 659 if (hw->mac.ops.cleanup_led) 660 return hw->mac.ops.cleanup_led(hw); 661 662 return E1000_SUCCESS; 663} 664 665/** 666 * e1000_blink_led - Blink SW controllable LED 667 * @hw: pointer to the HW structure 668 * 669 * This starts the adapter LED blinking. Request the LED to be setup first 670 * and cleaned up after. This is a function pointer entry point called by 671 * drivers. 672 **/ 673s32 e1000_blink_led(struct e1000_hw *hw) 674{ 675 if (hw->mac.ops.blink_led) 676 return hw->mac.ops.blink_led(hw); 677 678 return E1000_SUCCESS; 679} 680 681/** 682 * e1000_id_led_init - store LED configurations in SW 683 * @hw: pointer to the HW structure 684 * 685 * Initializes the LED config in SW. This is a function pointer entry point 686 * called by drivers. 687 **/ 688s32 e1000_id_led_init(struct e1000_hw *hw) 689{ 690 if (hw->mac.ops.id_led_init) 691 return hw->mac.ops.id_led_init(hw); 692 693 return E1000_SUCCESS; 694} 695 696/** 697 * e1000_led_on - Turn on SW controllable LED 698 * @hw: pointer to the HW structure 699 * 700 * Turns the SW defined LED on. This is a function pointer entry point 701 * called by drivers. 702 **/ 703s32 e1000_led_on(struct e1000_hw *hw) 704{ 705 if (hw->mac.ops.led_on) 706 return hw->mac.ops.led_on(hw); 707 708 return E1000_SUCCESS; 709} 710 711/** 712 * e1000_led_off - Turn off SW controllable LED 713 * @hw: pointer to the HW structure 714 * 715 * Turns the SW defined LED off. This is a function pointer entry point 716 * called by drivers. 717 **/ 718s32 e1000_led_off(struct e1000_hw *hw) 719{ 720 if (hw->mac.ops.led_off) 721 return hw->mac.ops.led_off(hw); 722 723 return E1000_SUCCESS; 724} 725 726/** 727 * e1000_reset_adaptive - Reset adaptive IFS 728 * @hw: pointer to the HW structure 729 * 730 * Resets the adaptive IFS. Currently no func pointer exists and all 731 * implementations are handled in the generic version of this function. 732 **/ 733void e1000_reset_adaptive(struct e1000_hw *hw) 734{ 735 e1000_reset_adaptive_generic(hw); 736} 737 738/** 739 * e1000_update_adaptive - Update adaptive IFS 740 * @hw: pointer to the HW structure 741 * 742 * Updates adapter IFS. Currently no func pointer exists and all 743 * implementations are handled in the generic version of this function. 744 **/ 745void e1000_update_adaptive(struct e1000_hw *hw) 746{ 747 e1000_update_adaptive_generic(hw); 748} 749 750/** 751 * e1000_disable_pcie_master - Disable PCI-Express master access 752 * @hw: pointer to the HW structure 753 * 754 * Disables PCI-Express master access and verifies there are no pending 755 * requests. Currently no func pointer exists and all implementations are 756 * handled in the generic version of this function. 757 **/ 758s32 e1000_disable_pcie_master(struct e1000_hw *hw) 759{ 760 return e1000_disable_pcie_master_generic(hw); 761} 762 763/** 764 * e1000_config_collision_dist - Configure collision distance 765 * @hw: pointer to the HW structure 766 * 767 * Configures the collision distance to the default value and is used 768 * during link setup. 769 **/ 770void e1000_config_collision_dist(struct e1000_hw *hw) 771{ 772 if (hw->mac.ops.config_collision_dist) 773 hw->mac.ops.config_collision_dist(hw); 774} 775 776/** 777 * e1000_rar_set - Sets a receive address register 778 * @hw: pointer to the HW structure 779 * @addr: address to set the RAR to 780 * @index: the RAR to set 781 * 782 * Sets a Receive Address Register (RAR) to the specified address. 783 **/ 784void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) 785{ 786 if (hw->mac.ops.rar_set) 787 hw->mac.ops.rar_set(hw, addr, index); 788} 789 790/** 791 * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state 792 * @hw: pointer to the HW structure 793 * 794 * Ensures that the MDI/MDIX SW state is valid. 795 **/ 796s32 e1000_validate_mdi_setting(struct e1000_hw *hw) 797{ 798 if (hw->mac.ops.validate_mdi_setting) 799 return hw->mac.ops.validate_mdi_setting(hw); 800 801 return E1000_SUCCESS; 802} 803 804/** 805 * e1000_hash_mc_addr - Determines address location in multicast table 806 * @hw: pointer to the HW structure 807 * @mc_addr: Multicast address to hash. 808 * 809 * This hashes an address to determine its location in the multicast 810 * table. Currently no func pointer exists and all implementations 811 * are handled in the generic version of this function. 812 **/ 813u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) 814{ 815 return e1000_hash_mc_addr_generic(hw, mc_addr); 816} 817 818/** 819 * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX 820 * @hw: pointer to the HW structure 821 * 822 * Enables packet filtering on transmit packets if manageability is enabled 823 * and host interface is enabled. 824 * Currently no func pointer exists and all implementations are handled in the 825 * generic version of this function. 826 **/ 827bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) 828{ 829 return e1000_enable_tx_pkt_filtering_generic(hw); 830} 831 832/** 833 * e1000_mng_host_if_write - Writes to the manageability host interface 834 * @hw: pointer to the HW structure 835 * @buffer: pointer to the host interface buffer 836 * @length: size of the buffer 837 * @offset: location in the buffer to write to 838 * @sum: sum of the data (not checksum) 839 * 840 * This function writes the buffer content at the offset given on the host if. 841 * It also does alignment considerations to do the writes in most efficient 842 * way. Also fills up the sum of the buffer in *buffer parameter. 843 **/ 844s32 e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer, u16 length, 845 u16 offset, u8 *sum) 846{ 847 if (hw->mac.ops.mng_host_if_write) 848 return hw->mac.ops.mng_host_if_write(hw, buffer, length, 849 offset, sum); 850 851 return E1000_NOT_IMPLEMENTED; 852} 853 854/** 855 * e1000_mng_write_cmd_header - Writes manageability command header 856 * @hw: pointer to the HW structure 857 * @hdr: pointer to the host interface command header 858 * 859 * Writes the command header after does the checksum calculation. 860 **/ 861s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, 862 struct e1000_host_mng_command_header *hdr) 863{ 864 if (hw->mac.ops.mng_write_cmd_header) 865 return hw->mac.ops.mng_write_cmd_header(hw, hdr); 866 867 return E1000_NOT_IMPLEMENTED; 868} 869 870/** 871 * e1000_mng_enable_host_if - Checks host interface is enabled 872 * @hw: pointer to the HW structure 873 * 874 * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND 875 * 876 * This function checks whether the HOST IF is enabled for command operation 877 * and also checks whether the previous command is completed. It busy waits 878 * in case of previous command is not completed. 879 **/ 880s32 e1000_mng_enable_host_if(struct e1000_hw * hw) 881{ 882 if (hw->mac.ops.mng_enable_host_if) 883 return hw->mac.ops.mng_enable_host_if(hw); 884 885 return E1000_NOT_IMPLEMENTED; 886} 887 888/** 889 * e1000_wait_autoneg - Waits for autonegotiation completion 890 * @hw: pointer to the HW structure 891 * 892 * Waits for autoneg to complete. Currently no func pointer exists and all 893 * implementations are handled in the generic version of this function. 894 **/ 895s32 e1000_wait_autoneg(struct e1000_hw *hw) 896{ 897 if (hw->mac.ops.wait_autoneg) 898 return hw->mac.ops.wait_autoneg(hw); 899 900 return E1000_SUCCESS; 901} 902 903/** 904 * e1000_check_reset_block - Verifies PHY can be reset 905 * @hw: pointer to the HW structure 906 * 907 * Checks if the PHY is in a state that can be reset or if manageability 908 * has it tied up. This is a function pointer entry point called by drivers. 909 **/ 910s32 e1000_check_reset_block(struct e1000_hw *hw) 911{ 912 if (hw->phy.ops.check_reset_block) 913 return hw->phy.ops.check_reset_block(hw); 914 915 return E1000_SUCCESS; 916} 917 918/** 919 * e1000_read_phy_reg - Reads PHY register 920 * @hw: pointer to the HW structure 921 * @offset: the register to read 922 * @data: the buffer to store the 16-bit read. 923 * 924 * Reads the PHY register and returns the value in data. 925 * This is a function pointer entry point called by drivers. 926 **/ 927s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) 928{ 929 if (hw->phy.ops.read_reg) 930 return hw->phy.ops.read_reg(hw, offset, data); 931 932 return E1000_SUCCESS; 933} 934 935/** 936 * e1000_write_phy_reg - Writes PHY register 937 * @hw: pointer to the HW structure 938 * @offset: the register to write 939 * @data: the value to write. 940 * 941 * Writes the PHY register at offset with the value in data. 942 * This is a function pointer entry point called by drivers. 943 **/ 944s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) 945{ 946 if (hw->phy.ops.write_reg) 947 return hw->phy.ops.write_reg(hw, offset, data); 948 949 return E1000_SUCCESS; 950} 951 952/** 953 * e1000_release_phy - Generic release PHY 954 * @hw: pointer to the HW structure 955 * 956 * Return if silicon family does not require a semaphore when accessing the 957 * PHY. 958 **/ 959void e1000_release_phy(struct e1000_hw *hw) 960{ 961 if (hw->phy.ops.release) 962 hw->phy.ops.release(hw); 963} 964 965/** 966 * e1000_acquire_phy - Generic acquire PHY 967 * @hw: pointer to the HW structure 968 * 969 * Return success if silicon family does not require a semaphore when 970 * accessing the PHY. 971 **/ 972s32 e1000_acquire_phy(struct e1000_hw *hw) 973{ 974 if (hw->phy.ops.acquire) 975 return hw->phy.ops.acquire(hw); 976 977 return E1000_SUCCESS; 978} 979 980/** 981 * e1000_cfg_on_link_up - Configure PHY upon link up 982 * @hw: pointer to the HW structure 983 **/ 984s32 e1000_cfg_on_link_up(struct e1000_hw *hw) 985{ 986 if (hw->phy.ops.cfg_on_link_up) 987 return hw->phy.ops.cfg_on_link_up(hw); 988 989 return E1000_SUCCESS; 990} 991 992/** 993 * e1000_read_kmrn_reg - Reads register using Kumeran interface 994 * @hw: pointer to the HW structure 995 * @offset: the register to read 996 * @data: the location to store the 16-bit value read. 997 * 998 * Reads a register out of the Kumeran interface. Currently no func pointer 999 * exists and all implementations are handled in the generic version of 1000 * this function. 1001 **/ 1002s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) 1003{ 1004 return e1000_read_kmrn_reg_generic(hw, offset, data); 1005} 1006 1007/** 1008 * e1000_write_kmrn_reg - Writes register using Kumeran interface 1009 * @hw: pointer to the HW structure 1010 * @offset: the register to write 1011 * @data: the value to write. 1012 * 1013 * Writes a register to the Kumeran interface. Currently no func pointer 1014 * exists and all implementations are handled in the generic version of 1015 * this function. 1016 **/ 1017s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) 1018{ 1019 return e1000_write_kmrn_reg_generic(hw, offset, data); 1020} 1021 1022/** 1023 * e1000_get_cable_length - Retrieves cable length estimation 1024 * @hw: pointer to the HW structure 1025 * 1026 * This function estimates the cable length and stores them in 1027 * hw->phy.min_length and hw->phy.max_length. This is a function pointer 1028 * entry point called by drivers. 1029 **/ 1030s32 e1000_get_cable_length(struct e1000_hw *hw) 1031{ 1032 if (hw->phy.ops.get_cable_length) 1033 return hw->phy.ops.get_cable_length(hw); 1034 1035 return E1000_SUCCESS; 1036} 1037 1038/** 1039 * e1000_get_phy_info - Retrieves PHY information from registers 1040 * @hw: pointer to the HW structure 1041 * 1042 * This function gets some information from various PHY registers and 1043 * populates hw->phy values with it. This is a function pointer entry 1044 * point called by drivers. 1045 **/ 1046s32 e1000_get_phy_info(struct e1000_hw *hw) 1047{ 1048 if (hw->phy.ops.get_info) 1049 return hw->phy.ops.get_info(hw); 1050 1051 return E1000_SUCCESS; 1052} 1053 1054/** 1055 * e1000_phy_hw_reset - Hard PHY reset 1056 * @hw: pointer to the HW structure 1057 * 1058 * Performs a hard PHY reset. This is a function pointer entry point called 1059 * by drivers. 1060 **/ 1061s32 e1000_phy_hw_reset(struct e1000_hw *hw) 1062{ 1063 if (hw->phy.ops.reset) 1064 return hw->phy.ops.reset(hw); 1065 1066 return E1000_SUCCESS; 1067} 1068 1069/** 1070 * e1000_phy_commit - Soft PHY reset 1071 * @hw: pointer to the HW structure 1072 * 1073 * Performs a soft PHY reset on those that apply. This is a function pointer 1074 * entry point called by drivers. 1075 **/ 1076s32 e1000_phy_commit(struct e1000_hw *hw) 1077{ 1078 if (hw->phy.ops.commit) 1079 return hw->phy.ops.commit(hw); 1080 1081 return E1000_SUCCESS; 1082} 1083 1084/** 1085 * e1000_set_d0_lplu_state - Sets low power link up state for D0 1086 * @hw: pointer to the HW structure 1087 * @active: boolean used to enable/disable lplu 1088 * 1089 * Success returns 0, Failure returns 1 1090 * 1091 * The low power link up (lplu) state is set to the power management level D0 1092 * and SmartSpeed is disabled when active is TRUE, else clear lplu for D0 1093 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1094 * is used during Dx states where the power conservation is most important. 1095 * During driver activity, SmartSpeed should be enabled so performance is 1096 * maintained. This is a function pointer entry point called by drivers. 1097 **/ 1098s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) 1099{ 1100 if (hw->phy.ops.set_d0_lplu_state) 1101 return hw->phy.ops.set_d0_lplu_state(hw, active); 1102 1103 return E1000_SUCCESS; 1104} 1105 1106/** 1107 * e1000_set_d3_lplu_state - Sets low power link up state for D3 1108 * @hw: pointer to the HW structure 1109 * @active: boolean used to enable/disable lplu 1110 * 1111 * Success returns 0, Failure returns 1 1112 * 1113 * The low power link up (lplu) state is set to the power management level D3 1114 * and SmartSpeed is disabled when active is TRUE, else clear lplu for D3 1115 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1116 * is used during Dx states where the power conservation is most important. 1117 * During driver activity, SmartSpeed should be enabled so performance is 1118 * maintained. This is a function pointer entry point called by drivers. 1119 **/ 1120s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) 1121{ 1122 if (hw->phy.ops.set_d3_lplu_state) 1123 return hw->phy.ops.set_d3_lplu_state(hw, active); 1124 1125 return E1000_SUCCESS; 1126} 1127 1128/** 1129 * e1000_read_mac_addr - Reads MAC address 1130 * @hw: pointer to the HW structure 1131 * 1132 * Reads the MAC address out of the adapter and stores it in the HW structure. 1133 * Currently no func pointer exists and all implementations are handled in the 1134 * generic version of this function. 1135 **/ 1136s32 e1000_read_mac_addr(struct e1000_hw *hw) 1137{ 1138 if (hw->mac.ops.read_mac_addr) 1139 return hw->mac.ops.read_mac_addr(hw); 1140 1141 return e1000_read_mac_addr_generic(hw); 1142} 1143 1144/** 1145 * e1000_read_pba_string - Read device part number string 1146 * @hw: pointer to the HW structure 1147 * @pba_num: pointer to device part number 1148 * @pba_num_size: size of part number buffer 1149 * 1150 * Reads the product board assembly (PBA) number from the EEPROM and stores 1151 * the value in pba_num. 1152 * Currently no func pointer exists and all implementations are handled in the 1153 * generic version of this function. 1154 **/ 1155s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) 1156{ 1157 return e1000_read_pba_string_generic(hw, pba_num, pba_num_size); 1158} 1159 1160/** 1161 * e1000_read_pba_length - Read device part number string length 1162 * @hw: pointer to the HW structure 1163 * @pba_num_size: size of part number buffer 1164 * 1165 * Reads the product board assembly (PBA) number length from the EEPROM and 1166 * stores the value in pba_num. 1167 * Currently no func pointer exists and all implementations are handled in the 1168 * generic version of this function. 1169 **/ 1170s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size) 1171{ 1172 return e1000_read_pba_length_generic(hw, pba_num_size); 1173} 1174 1175/** 1176 * e1000_read_pba_num - Read device part number 1177 * @hw: pointer to the HW structure 1178 * @pba_num: pointer to device part number 1179 * 1180 * Reads the product board assembly (PBA) number from the EEPROM and stores 1181 * the value in pba_num. 1182 * Currently no func pointer exists and all implementations are handled in the 1183 * generic version of this function. 1184 **/ 1185s32 e1000_read_pba_num(struct e1000_hw *hw, u32 *pba_num) 1186{ 1187 return e1000_read_pba_num_generic(hw, pba_num); 1188} 1189 1190/** 1191 * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum 1192 * @hw: pointer to the HW structure 1193 * 1194 * Validates the NVM checksum is correct. This is a function pointer entry 1195 * point called by drivers. 1196 **/ 1197s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) 1198{ 1199 if (hw->nvm.ops.validate) 1200 return hw->nvm.ops.validate(hw); 1201 1202 return -E1000_ERR_CONFIG; 1203} 1204 1205/** 1206 * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum 1207 * @hw: pointer to the HW structure 1208 * 1209 * Updates the NVM checksum. Currently no func pointer exists and all 1210 * implementations are handled in the generic version of this function. 1211 **/ 1212s32 e1000_update_nvm_checksum(struct e1000_hw *hw) 1213{ 1214 if (hw->nvm.ops.update) 1215 return hw->nvm.ops.update(hw); 1216 1217 return -E1000_ERR_CONFIG; 1218} 1219 1220/** 1221 * e1000_reload_nvm - Reloads EEPROM 1222 * @hw: pointer to the HW structure 1223 * 1224 * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the 1225 * extended control register. 1226 **/ 1227void e1000_reload_nvm(struct e1000_hw *hw) 1228{ 1229 if (hw->nvm.ops.reload) 1230 hw->nvm.ops.reload(hw); 1231} 1232 1233/** 1234 * e1000_read_nvm - Reads NVM (EEPROM) 1235 * @hw: pointer to the HW structure 1236 * @offset: the word offset to read 1237 * @words: number of 16-bit words to read 1238 * @data: pointer to the properly sized buffer for the data. 1239 * 1240 * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function 1241 * pointer entry point called by drivers. 1242 **/ 1243s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1244{ 1245 if (hw->nvm.ops.read) 1246 return hw->nvm.ops.read(hw, offset, words, data); 1247 1248 return -E1000_ERR_CONFIG; 1249} 1250 1251/** 1252 * e1000_write_nvm - Writes to NVM (EEPROM) 1253 * @hw: pointer to the HW structure 1254 * @offset: the word offset to read 1255 * @words: number of 16-bit words to write 1256 * @data: pointer to the properly sized buffer for the data. 1257 * 1258 * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function 1259 * pointer entry point called by drivers. 1260 **/ 1261s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1262{ 1263 if (hw->nvm.ops.write) 1264 return hw->nvm.ops.write(hw, offset, words, data); 1265 1266 return E1000_SUCCESS; 1267} 1268 1269/** 1270 * e1000_write_8bit_ctrl_reg - Writes 8bit Control register 1271 * @hw: pointer to the HW structure 1272 * @reg: 32bit register offset 1273 * @offset: the register to write 1274 * @data: the value to write. 1275 * 1276 * Writes the PHY register at offset with the value in data. 1277 * This is a function pointer entry point called by drivers. 1278 **/ 1279s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, 1280 u8 data) 1281{ 1282 return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); 1283} 1284 1285/** 1286 * e1000_power_up_phy - Restores link in case of PHY power down 1287 * @hw: pointer to the HW structure 1288 * 1289 * The phy may be powered down to save power, to turn off link when the 1290 * driver is unloaded, or wake on lan is not enabled (among others). 1291 **/ 1292void e1000_power_up_phy(struct e1000_hw *hw) 1293{ 1294 if (hw->phy.ops.power_up) 1295 hw->phy.ops.power_up(hw); 1296 1297 e1000_setup_link(hw); 1298} 1299 1300/** 1301 * e1000_power_down_phy - Power down PHY 1302 * @hw: pointer to the HW structure 1303 * 1304 * The phy may be powered down to save power, to turn off link when the 1305 * driver is unloaded, or wake on lan is not enabled (among others). 1306 **/ 1307void e1000_power_down_phy(struct e1000_hw *hw) 1308{ 1309 if (hw->phy.ops.power_down) 1310 hw->phy.ops.power_down(hw); 1311} 1312 1313/** 1314 * e1000_power_up_fiber_serdes_link - Power up serdes link 1315 * @hw: pointer to the HW structure 1316 * 1317 * Power on the optics and PCS. 1318 **/ 1319void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw) 1320{ 1321 if (hw->mac.ops.power_up_serdes) 1322 hw->mac.ops.power_up_serdes(hw); 1323} 1324 1325/** 1326 * e1000_shutdown_fiber_serdes_link - Remove link during power down 1327 * @hw: pointer to the HW structure 1328 * 1329 * Shutdown the optics and PCS on driver unload. 1330 **/ 1331void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw) 1332{ 1333 if (hw->mac.ops.shutdown_serdes) 1334 hw->mac.ops.shutdown_serdes(hw); 1335} 1336 1337