ar9300_eeprom.c revision 250008
1/* 2 * Copyright (c) 2013 Qualcomm Atheros, Inc. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH 9 * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 10 * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, 11 * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM 12 * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR 13 * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 14 * PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17#include "opt_ah.h" 18 19#include "ah.h" 20#include "ah_internal.h" 21#include "ah_devid.h" 22#ifdef AH_DEBUG 23#include "ah_desc.h" /* NB: for HAL_PHYERR* */ 24#endif 25#include "ar9300/ar9300.h" 26#include "ar9300/ar9300eep.h" 27#include "ar9300/ar9300template_generic.h" 28#include "ar9300/ar9300template_xb112.h" 29#include "ar9300/ar9300template_hb116.h" 30#include "ar9300/ar9300template_xb113.h" 31#include "ar9300/ar9300template_hb112.h" 32#include "ar9300/ar9300template_ap121.h" 33#include "ar9300/ar9300template_osprey_k31.h" 34#include "ar9300/ar9300template_wasp_2.h" 35#include "ar9300/ar9300template_wasp_k31.h" 36#include "ar9300/ar9300template_aphrodite.h" 37#include "ar9300/ar9300reg.h" 38#include "ar9300/ar9300phy.h" 39 40 41 42#if AH_BYTE_ORDER == AH_BIG_ENDIAN 43void ar9300_swap_eeprom(ar9300_eeprom_t *eep); 44void ar9300_eeprom_template_swap(void); 45#endif 46 47static u_int16_t ar9300_eeprom_get_spur_chan(struct ath_hal *ah, 48 int spur_chan, HAL_BOOL is_2ghz); 49#ifdef UNUSED 50static inline HAL_BOOL ar9300_fill_eeprom(struct ath_hal *ah); 51static inline HAL_STATUS ar9300_check_eeprom(struct ath_hal *ah); 52#endif 53 54static ar9300_eeprom_t *default9300[] = 55{ 56 &ar9300_template_generic, 57 &ar9300_template_xb112, 58 &ar9300_template_hb116, 59 &ar9300_template_hb112, 60 &ar9300_template_xb113, 61 &ar9300_template_ap121, 62 &ar9300_template_wasp_2, 63 &ar9300_template_wasp_k31, 64 &ar9300_template_osprey_k31, 65 &ar9300_template_aphrodite, 66}; 67 68/* 69 * Different types of memory where the calibration data might be stored. 70 * All types are searched in ar9300_eeprom_restore() 71 * in the order flash, eeprom, otp. 72 * To disable searching a type, set its parameter to 0. 73 */ 74 75/* 76 * This is where we look for the calibration data. 77 * must be set before ath_attach() is called 78 */ 79static int calibration_data_try = calibration_data_none; 80static int calibration_data_try_address = 0; 81 82/* 83 * Set the type of memory used to store calibration data. 84 * Used by nart to force reading/writing of a specific type. 85 * The driver can normally allow autodetection 86 * by setting source to calibration_data_none=0. 87 */ 88void ar9300_calibration_data_set(struct ath_hal *ah, int32_t source) 89{ 90 if (ah != 0) { 91 AH9300(ah)->calibration_data_source = source; 92 } else { 93 calibration_data_try = source; 94 } 95} 96 97int32_t ar9300_calibration_data_get(struct ath_hal *ah) 98{ 99 if (ah != 0) { 100 return AH9300(ah)->calibration_data_source; 101 } else { 102 return calibration_data_try; 103 } 104} 105 106/* 107 * Set the address of first byte used to store calibration data. 108 * Used by nart to force reading/writing at a specific address. 109 * The driver can normally allow autodetection by setting size=0. 110 */ 111void ar9300_calibration_data_address_set(struct ath_hal *ah, int32_t size) 112{ 113 if (ah != 0) { 114 AH9300(ah)->calibration_data_source_address = size; 115 } else { 116 calibration_data_try_address = size; 117 } 118} 119 120int32_t ar9300_calibration_data_address_get(struct ath_hal *ah) 121{ 122 if (ah != 0) { 123 return AH9300(ah)->calibration_data_source_address; 124 } else { 125 return calibration_data_try_address; 126 } 127} 128 129/* 130 * This is the template that is loaded if ar9300_eeprom_restore() 131 * can't find valid data in the memory. 132 */ 133static int Ar9300_eeprom_template_preference = ar9300_eeprom_template_generic; 134 135void ar9300_eeprom_template_preference(int32_t value) 136{ 137 Ar9300_eeprom_template_preference = value; 138} 139 140/* 141 * Install the specified default template. 142 * Overwrites any existing calibration and configuration information in memory. 143 */ 144int32_t ar9300_eeprom_template_install(struct ath_hal *ah, int32_t value) 145{ 146 struct ath_hal_9300 *ahp = AH9300(ah); 147 ar9300_eeprom_t *mptr, *dptr; 148 int mdata_size; 149 150 mptr = &ahp->ah_eeprom; 151 mdata_size = ar9300_eeprom_struct_size(); 152 if (mptr != 0) { 153#if 0 154 calibration_data_source = calibration_data_none; 155 calibration_data_source_address = 0; 156#endif 157 dptr = ar9300_eeprom_struct_default_find_by_id(value); 158 if (dptr != 0) { 159 OS_MEMCPY(mptr, dptr, mdata_size); 160 return 0; 161 } 162 } 163 return -1; 164} 165 166static int 167ar9300_eeprom_restore_something(struct ath_hal *ah, ar9300_eeprom_t *mptr, 168 int mdata_size) 169{ 170 int it; 171 ar9300_eeprom_t *dptr; 172 int nptr; 173 174 nptr = -1; 175 /* 176 * if we didn't find any blocks in the memory, 177 * put the prefered template in place 178 */ 179 if (nptr < 0) { 180 AH9300(ah)->calibration_data_source = calibration_data_none; 181 AH9300(ah)->calibration_data_source_address = 0; 182 dptr = ar9300_eeprom_struct_default_find_by_id( 183 Ar9300_eeprom_template_preference); 184 if (dptr != 0) { 185 OS_MEMCPY(mptr, dptr, mdata_size); 186 nptr = 0; 187 } 188 } 189 /* 190 * if we didn't find the prefered one, 191 * put the normal default template in place 192 */ 193 if (nptr < 0) { 194 AH9300(ah)->calibration_data_source = calibration_data_none; 195 AH9300(ah)->calibration_data_source_address = 0; 196 dptr = ar9300_eeprom_struct_default_find_by_id( 197 ar9300_eeprom_template_default); 198 if (dptr != 0) { 199 OS_MEMCPY(mptr, dptr, mdata_size); 200 nptr = 0; 201 } 202 } 203 /* 204 * if we can't find the best template, put any old template in place 205 * presume that newer ones are better, so search backwards 206 */ 207 if (nptr < 0) { 208 AH9300(ah)->calibration_data_source = calibration_data_none; 209 AH9300(ah)->calibration_data_source_address = 0; 210 for (it = ar9300_eeprom_struct_default_many() - 1; it >= 0; it--) { 211 dptr = ar9300_eeprom_struct_default(it); 212 if (dptr != 0) { 213 OS_MEMCPY(mptr, dptr, mdata_size); 214 nptr = 0; 215 break; 216 } 217 } 218 } 219 return nptr; 220} 221 222/* 223 * Read 16 bits of data from offset into *data 224 */ 225HAL_BOOL 226ar9300_eeprom_read_word(struct ath_hal *ah, u_int off, u_int16_t *data) 227{ 228 if (AR_SREV_OSPREY(ah) || AR_SREV_POSEIDON(ah)) 229 { 230 (void) OS_REG_READ(ah, AR9300_EEPROM_OFFSET + (off << AR9300_EEPROM_S)); 231 if (!ath_hal_wait(ah, 232 AR_HOSTIF_REG(ah, AR_EEPROM_STATUS_DATA), 233 AR_EEPROM_STATUS_DATA_BUSY | AR_EEPROM_STATUS_DATA_PROT_ACCESS, 234 0)) 235 { 236 return AH_FALSE; 237 } 238 *data = MS(OS_REG_READ(ah, 239 AR_HOSTIF_REG(ah, AR_EEPROM_STATUS_DATA)), AR_EEPROM_STATUS_DATA_VAL); 240 return AH_TRUE; 241 } 242 else 243 { 244 *data = 0; 245 return AH_FALSE; 246 } 247} 248 249 250HAL_BOOL 251ar9300_otp_read(struct ath_hal *ah, u_int off, u_int32_t *data, HAL_BOOL is_wifi) 252{ 253 int time_out = 1000; 254 int status = 0; 255 u_int32_t addr; 256 257 addr = (AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah))? 258 OTP_MEM_START_ADDRESS_WASP : OTP_MEM_START_ADDRESS; 259 if (!is_wifi) { 260 addr = BTOTP_MEM_START_ADDRESS; 261 } 262 addr += off * 4; /* OTP is 32 bit addressable */ 263 (void) OS_REG_READ(ah, addr); 264 265 addr = (AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah)) ? 266 OTP_STATUS0_OTP_SM_BUSY_WASP : OTP_STATUS0_OTP_SM_BUSY; 267 if (!is_wifi) { 268 addr = BTOTP_STATUS0_OTP_SM_BUSY; 269 } 270 while ((time_out > 0) && (!status)) { /* wait for access complete */ 271 /* Read data valid, access not busy, sm not busy */ 272 status = ((OS_REG_READ(ah, addr) & 0x7) == 0x4) ? 1 : 0; 273 time_out--; 274 } 275 if (time_out == 0) { 276 HALDEBUG(ah, HAL_DEBUG_EEPROM, 277 "%s: Timed out during OTP Status0 validation\n", __func__); 278 return AH_FALSE; 279 } 280 281 addr = (AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah)) ? 282 OTP_STATUS1_EFUSE_READ_DATA_WASP : OTP_STATUS1_EFUSE_READ_DATA; 283 if (!is_wifi) { 284 addr = BTOTP_STATUS1_EFUSE_READ_DATA; 285 } 286 *data = OS_REG_READ(ah, addr); 287 return AH_TRUE; 288} 289 290 291 292 293static HAL_STATUS 294ar9300_flash_map(struct ath_hal *ah) 295{ 296 /* XXX disable flash remapping for now (ie, SoC support) */ 297 ath_hal_printf(ah, "%s: unimplemented for now\n", __func__); 298#if 0 299 struct ath_hal_9300 *ahp = AH9300(ah); 300#if defined(AR9100) || defined(__NetBSD__) 301 ahp->ah_cal_mem = OS_REMAP(ah, AR9300_EEPROM_START_ADDR, AR9300_EEPROM_MAX); 302#else 303 ahp->ah_cal_mem = OS_REMAP((uintptr_t)(AH_PRIVATE(ah)->ah_st), 304 (AR9300_EEPROM_MAX + AR9300_FLASH_CAL_START_OFFSET)); 305#endif 306 if (!ahp->ah_cal_mem) { 307 HALDEBUG(ah, HAL_DEBUG_EEPROM, 308 "%s: cannot remap eeprom region \n", __func__); 309 return HAL_EIO; 310 } 311#endif 312 return HAL_OK; 313} 314 315HAL_BOOL 316ar9300_flash_read(struct ath_hal *ah, u_int off, u_int16_t *data) 317{ 318 struct ath_hal_9300 *ahp = AH9300(ah); 319 320 *data = ((u_int16_t *)ahp->ah_cal_mem)[off]; 321 return AH_TRUE; 322} 323 324HAL_BOOL 325ar9300_flash_write(struct ath_hal *ah, u_int off, u_int16_t data) 326{ 327 struct ath_hal_9300 *ahp = AH9300(ah); 328 329 ((u_int16_t *)ahp->ah_cal_mem)[off] = data; 330 return AH_TRUE; 331} 332 333HAL_STATUS 334ar9300_eeprom_attach(struct ath_hal *ah) 335{ 336 struct ath_hal_9300 *ahp = AH9300(ah); 337 ahp->try_dram = 1; 338 ahp->try_eeprom = 1; 339 ahp->try_otp = 1; 340#ifdef ATH_CAL_NAND_FLASH 341 ahp->try_nand = 1; 342#else 343 ahp->try_flash = 1; 344#endif 345 ahp->calibration_data_source = calibration_data_none; 346 ahp->calibration_data_source_address = 0; 347 ahp->calibration_data_try = calibration_data_try; 348 ahp->calibration_data_try_address = 0; 349 350 /* 351 * In case flash will be used for EEPROM. Otherwise ahp->ah_cal_mem 352 * must be set to NULL or the real EEPROM address. 353 */ 354 ar9300_flash_map(ah); 355 /* 356 * ###### This function always return NO SPUR. 357 * This is not AH_TRUE for many board designs. 358 * Does anyone use this? 359 */ 360 AH_PRIVATE(ah)->ah_getSpurChan = ar9300_eeprom_get_spur_chan; 361 362#ifdef OLDCODE 363 /* XXX Needs to be moved for dynamic selection */ 364 ahp->ah_eeprom = *(default9300[ar9300_eeprom_template_default]); 365 366 367 if (AR_SREV_HORNET(ah)) { 368 /* Set default values for Hornet. */ 369 ahp->ah_eeprom.base_eep_header.op_cap_flags.op_flags = 370 AR9300_OPFLAGS_11G; 371 ahp->ah_eeprom.base_eep_header.txrx_mask = 0x11; 372 } else if (AR_SREV_POSEIDON(ah)) { 373 /* Set default values for Poseidon. */ 374 ahp->ah_eeprom.base_eep_header.op_cap_flags.op_flags = 375 AR9300_OPFLAGS_11G; 376 ahp->ah_eeprom.base_eep_header.txrx_mask = 0x11; 377 } 378 379 if (AH_PRIVATE(ah)->ah_config.ath_hal_skip_eeprom_read) { 380 ahp->ah_emu_eeprom = 1; 381 return HAL_OK; 382 } 383 384 ahp->ah_emu_eeprom = 1; 385 386#ifdef UNUSED 387#endif 388 389 if (!ar9300_fill_eeprom(ah)) { 390 return HAL_EIO; 391 } 392 393 return HAL_OK; 394 /* return ar9300_check_eeprom(ah); */ 395#else 396 ahp->ah_emu_eeprom = 1; 397 398#if 0 399/*#ifdef MDK_AP*/ /* MDK_AP is defined only in NART AP build */ 400 u_int8_t buffer[10]; 401 int caldata_check = 0; 402 403 ar9300_calibration_data_read_flash( 404 ah, FLASH_BASE_CALDATA_OFFSET, buffer, 4); 405 printf("flash caldata:: %x\n", buffer[0]); 406 if (buffer[0] != 0xff) { 407 caldata_check = 1; 408 } 409 if (!caldata_check) { 410 ar9300_eeprom_t *mptr; 411 int mdata_size; 412 if (AR_SREV_HORNET(ah)) { 413 /* XXX: For initial testing */ 414 mptr = &ahp->ah_eeprom; 415 mdata_size = ar9300_eeprom_struct_size(); 416 ahp->ah_eeprom = ar9300_template_ap121; 417 ahp->ah_emu_eeprom = 1; 418 /* need it to let art save in to flash ????? */ 419 calibration_data_source = calibration_data_flash; 420 } else if (AR_SREV_WASP(ah)) { 421 /* XXX: For initial testing */ 422 ath_hal_printf(ah, " wasp eep attach\n"); 423 mptr = &ahp->ah_eeprom; 424 mdata_size = ar9300_eeprom_struct_size(); 425 ahp->ah_eeprom = ar9300_template_generic; 426 ahp->ah_eeprom.mac_addr[0] = 0x00; 427 ahp->ah_eeprom.mac_addr[1] = 0x03; 428 ahp->ah_eeprom.mac_addr[2] = 0x7F; 429 ahp->ah_eeprom.mac_addr[3] = 0xBA; 430 ahp->ah_eeprom.mac_addr[4] = 0xD0; 431 ahp->ah_eeprom.mac_addr[5] = 0x00; 432 ahp->ah_emu_eeprom = 1; 433 ahp->ah_eeprom.base_eep_header.txrx_mask = 0x33; 434 ahp->ah_eeprom.base_eep_header.txrxgain = 0x10; 435 /* need it to let art save in to flash ????? */ 436 calibration_data_source = calibration_data_flash; 437 } 438 return HAL_OK; 439 } 440#endif 441 if (AR_SREV_HORNET(ah) || AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah)) { 442 ahp->try_eeprom = 0; 443 } 444 445 if (!ar9300_eeprom_restore(ah)) { 446 return HAL_EIO; 447 } 448 return HAL_OK; 449#endif 450} 451 452u_int32_t 453ar9300_eeprom_get(struct ath_hal_9300 *ahp, EEPROM_PARAM param) 454{ 455 ar9300_eeprom_t *eep = &ahp->ah_eeprom; 456 OSPREY_BASE_EEP_HEADER *p_base = &eep->base_eep_header; 457 OSPREY_BASE_EXTENSION_1 *base_ext1 = &eep->base_ext1; 458 459 switch (param) { 460#ifdef NOTYET 461 case EEP_NFTHRESH_5: 462 return p_modal[0].noise_floor_thresh_ch[0]; 463 case EEP_NFTHRESH_2: 464 return p_modal[1].noise_floor_thresh_ch[0]; 465#endif 466 case EEP_MAC_LSW: 467 return eep->mac_addr[0] << 8 | eep->mac_addr[1]; 468 case EEP_MAC_MID: 469 return eep->mac_addr[2] << 8 | eep->mac_addr[3]; 470 case EEP_MAC_MSW: 471 return eep->mac_addr[4] << 8 | eep->mac_addr[5]; 472 case EEP_REG_0: 473 return p_base->reg_dmn[0]; 474 case EEP_REG_1: 475 return p_base->reg_dmn[1]; 476 case EEP_OP_CAP: 477 return p_base->device_cap; 478 case EEP_OP_MODE: 479 return p_base->op_cap_flags.op_flags; 480 case EEP_RF_SILENT: 481 return p_base->rf_silent; 482#ifdef NOTYET 483 case EEP_OB_5: 484 return p_modal[0].ob; 485 case EEP_DB_5: 486 return p_modal[0].db; 487 case EEP_OB_2: 488 return p_modal[1].ob; 489 case EEP_DB_2: 490 return p_modal[1].db; 491 case EEP_MINOR_REV: 492 return p_base->eeprom_version & AR9300_EEP_VER_MINOR_MASK; 493#endif 494 case EEP_TX_MASK: 495 return (p_base->txrx_mask >> 4) & 0xf; 496 case EEP_RX_MASK: 497 return p_base->txrx_mask & 0xf; 498#ifdef NOTYET 499 case EEP_FSTCLK_5G: 500 return p_base->fast_clk5g; 501 case EEP_RXGAIN_TYPE: 502 return p_base->rx_gain_type; 503#endif 504 case EEP_DRIVE_STRENGTH: 505#define AR9300_EEP_BASE_DRIVE_STRENGTH 0x1 506 return p_base->misc_configuration & AR9300_EEP_BASE_DRIVE_STRENGTH; 507 case EEP_INTERNAL_REGULATOR: 508 /* Bit 4 is internal regulator flag */ 509 return ((p_base->feature_enable & 0x10) >> 4); 510 case EEP_SWREG: 511 return (p_base->swreg); 512 case EEP_PAPRD_ENABLED: 513 /* Bit 5 is paprd flag */ 514 return ((p_base->feature_enable & 0x20) >> 5); 515 case EEP_ANTDIV_control: 516 return (u_int32_t)(base_ext1->ant_div_control); 517 case EEP_CHAIN_MASK_REDUCE: 518 return ((p_base->misc_configuration >> 3) & 0x1); 519 case EEP_OL_PWRCTRL: 520 return 0; 521 case EEP_DEV_TYPE: 522 return p_base->device_type; 523 default: 524 HALASSERT(0); 525 return 0; 526 } 527} 528 529 530 531/******************************************************************************/ 532/*! 533** \brief EEPROM fixup code for INI values 534** 535** This routine provides a place to insert "fixup" code for specific devices 536** that need to modify INI values based on EEPROM values, BEFORE the INI values 537** are written. 538** Certain registers in the INI file can only be written once without 539** undesired side effects, and this provides a place for EEPROM overrides 540** in these cases. 541** 542** This is called at attach time once. It should not affect run time 543** performance at all 544** 545** \param ah Pointer to HAL object (this) 546** \param p_eep_data Pointer to (filled in) eeprom data structure 547** \param reg register being inspected on this call 548** \param value value in INI file 549** 550** \return Updated value for INI file. 551*/ 552u_int32_t 553ar9300_ini_fixup(struct ath_hal *ah, ar9300_eeprom_t *p_eep_data, 554 u_int32_t reg, u_int32_t value) 555{ 556 HALDEBUG(AH_NULL, HAL_DEBUG_UNMASKABLE, 557 "ar9300_eeprom_def_ini_fixup: FIXME\n"); 558#if 0 559 BASE_EEPDEF_HEADER *p_base = &(p_eep_data->base_eep_header); 560 561 switch (AH_PRIVATE(ah)->ah_devid) 562 { 563 case AR9300_DEVID_AR9300_PCI: 564 /* 565 ** Need to set the external/internal regulator bit to the proper value. 566 ** Can only write this ONCE. 567 */ 568 569 if ( reg == 0x7894 ) 570 { 571 /* 572 ** Check for an EEPROM data structure of "0x0b" or better 573 */ 574 575 HALDEBUG(ah, HAL_DEBUG_EEPROM, "ini VAL: %x EEPROM: %x\n", 576 value, (p_base->version & 0xff)); 577 578 if ( (p_base->version & 0xff) > 0x0a) { 579 HALDEBUG(ah, HAL_DEBUG_EEPROM, 580 "PWDCLKIND: %d\n", p_base->pwdclkind); 581 value &= ~AR_AN_TOP2_PWDCLKIND; 582 value |= 583 AR_AN_TOP2_PWDCLKIND & 584 (p_base->pwdclkind << AR_AN_TOP2_PWDCLKIND_S); 585 } else { 586 HALDEBUG(ah, HAL_DEBUG_EEPROM, "PWDCLKIND Earlier Rev\n"); 587 } 588 589 HALDEBUG(ah, HAL_DEBUG_EEPROM, "final ini VAL: %x\n", value); 590 } 591 break; 592 593 } 594 595 return (value); 596#else 597 return 0; 598#endif 599} 600 601/* 602 * Returns the interpolated y value corresponding to the specified x value 603 * from the np ordered pairs of data (px,py). 604 * The pairs do not have to be in any order. 605 * If the specified x value is less than any of the px, 606 * the returned y value is equal to the py for the lowest px. 607 * If the specified x value is greater than any of the px, 608 * the returned y value is equal to the py for the highest px. 609 */ 610static int 611interpolate(int32_t x, int32_t *px, int32_t *py, u_int16_t np) 612{ 613 int ip = 0; 614 int lx = 0, ly = 0, lhave = 0; 615 int hx = 0, hy = 0, hhave = 0; 616 int dx = 0; 617 int y = 0; 618 int bf, factor, plus; 619 620 lhave = 0; 621 hhave = 0; 622 /* 623 * identify best lower and higher x calibration measurement 624 */ 625 for (ip = 0; ip < np; ip++) { 626 dx = x - px[ip]; 627 /* this measurement is higher than our desired x */ 628 if (dx <= 0) { 629 if (!hhave || dx > (x - hx)) { 630 /* new best higher x measurement */ 631 hx = px[ip]; 632 hy = py[ip]; 633 hhave = 1; 634 } 635 } 636 /* this measurement is lower than our desired x */ 637 if (dx >= 0) { 638 if (!lhave || dx < (x - lx)) { 639 /* new best lower x measurement */ 640 lx = px[ip]; 641 ly = py[ip]; 642 lhave = 1; 643 } 644 } 645 } 646 /* the low x is good */ 647 if (lhave) { 648 /* so is the high x */ 649 if (hhave) { 650 /* they're the same, so just pick one */ 651 if (hx == lx) { 652 y = ly; 653 } else { 654 /* interpolate with round off */ 655 bf = (2 * (hy - ly) * (x - lx)) / (hx - lx); 656 plus = (bf % 2); 657 factor = bf / 2; 658 y = ly + factor + plus; 659 } 660 } else { 661 /* only low is good, use it */ 662 y = ly; 663 } 664 } else if (hhave) { 665 /* only high is good, use it */ 666 y = hy; 667 } else { 668 /* nothing is good,this should never happen unless np=0, ???? */ 669 y = -(1 << 30); 670 } 671 672 return y; 673} 674 675u_int8_t 676ar9300_eeprom_get_legacy_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, 677 u_int16_t freq, HAL_BOOL is_2ghz) 678{ 679 u_int16_t num_piers, i; 680 int32_t target_power_array[OSPREY_NUM_5G_20_TARGET_POWERS]; 681 int32_t freq_array[OSPREY_NUM_5G_20_TARGET_POWERS]; 682 u_int8_t *p_freq_bin; 683 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 684 CAL_TARGET_POWER_LEG *p_eeprom_target_pwr; 685 686 if (is_2ghz) { 687 num_piers = OSPREY_NUM_2G_20_TARGET_POWERS; 688 p_eeprom_target_pwr = eep->cal_target_power_2g; 689 p_freq_bin = eep->cal_target_freqbin_2g; 690 } else { 691 num_piers = OSPREY_NUM_5G_20_TARGET_POWERS; 692 p_eeprom_target_pwr = eep->cal_target_power_5g; 693 p_freq_bin = eep->cal_target_freqbin_5g; 694 } 695 696 /* 697 * create array of channels and targetpower from 698 * targetpower piers stored on eeprom 699 */ 700 for (i = 0; i < num_piers; i++) { 701 freq_array[i] = FBIN2FREQ(p_freq_bin[i], is_2ghz); 702 target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; 703 } 704 705 /* interpolate to get target power for given frequency */ 706 return 707 ((u_int8_t)interpolate( 708 (int32_t)freq, freq_array, target_power_array, num_piers)); 709} 710 711u_int8_t 712ar9300_eeprom_get_ht20_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, 713 u_int16_t freq, HAL_BOOL is_2ghz) 714{ 715 u_int16_t num_piers, i; 716 int32_t target_power_array[OSPREY_NUM_5G_20_TARGET_POWERS]; 717 int32_t freq_array[OSPREY_NUM_5G_20_TARGET_POWERS]; 718 u_int8_t *p_freq_bin; 719 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 720 OSP_CAL_TARGET_POWER_HT *p_eeprom_target_pwr; 721 722 if (is_2ghz) { 723 num_piers = OSPREY_NUM_2G_20_TARGET_POWERS; 724 p_eeprom_target_pwr = eep->cal_target_power_2g_ht20; 725 p_freq_bin = eep->cal_target_freqbin_2g_ht20; 726 } else { 727 num_piers = OSPREY_NUM_5G_20_TARGET_POWERS; 728 p_eeprom_target_pwr = eep->cal_target_power_5g_ht20; 729 p_freq_bin = eep->cal_target_freqbin_5g_ht20; 730 } 731 732 /* 733 * create array of channels and targetpower from 734 * targetpower piers stored on eeprom 735 */ 736 for (i = 0; i < num_piers; i++) { 737 freq_array[i] = FBIN2FREQ(p_freq_bin[i], is_2ghz); 738 target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; 739 } 740 741 /* interpolate to get target power for given frequency */ 742 return 743 ((u_int8_t)interpolate( 744 (int32_t)freq, freq_array, target_power_array, num_piers)); 745} 746 747u_int8_t 748ar9300_eeprom_get_ht40_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, 749 u_int16_t freq, HAL_BOOL is_2ghz) 750{ 751 u_int16_t num_piers, i; 752 int32_t target_power_array[OSPREY_NUM_5G_40_TARGET_POWERS]; 753 int32_t freq_array[OSPREY_NUM_5G_40_TARGET_POWERS]; 754 u_int8_t *p_freq_bin; 755 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 756 OSP_CAL_TARGET_POWER_HT *p_eeprom_target_pwr; 757 758 if (is_2ghz) { 759 num_piers = OSPREY_NUM_2G_40_TARGET_POWERS; 760 p_eeprom_target_pwr = eep->cal_target_power_2g_ht40; 761 p_freq_bin = eep->cal_target_freqbin_2g_ht40; 762 } else { 763 num_piers = OSPREY_NUM_5G_40_TARGET_POWERS; 764 p_eeprom_target_pwr = eep->cal_target_power_5g_ht40; 765 p_freq_bin = eep->cal_target_freqbin_5g_ht40; 766 } 767 768 /* 769 * create array of channels and targetpower from 770 * targetpower piers stored on eeprom 771 */ 772 for (i = 0; i < num_piers; i++) { 773 freq_array[i] = FBIN2FREQ(p_freq_bin[i], is_2ghz); 774 target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; 775 } 776 777 /* interpolate to get target power for given frequency */ 778 return 779 ((u_int8_t)interpolate( 780 (int32_t)freq, freq_array, target_power_array, num_piers)); 781} 782 783u_int8_t 784ar9300_eeprom_get_cck_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, 785 u_int16_t freq) 786{ 787 u_int16_t num_piers = OSPREY_NUM_2G_CCK_TARGET_POWERS, i; 788 int32_t target_power_array[OSPREY_NUM_2G_CCK_TARGET_POWERS]; 789 int32_t freq_array[OSPREY_NUM_2G_CCK_TARGET_POWERS]; 790 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 791 u_int8_t *p_freq_bin = eep->cal_target_freqbin_cck; 792 CAL_TARGET_POWER_LEG *p_eeprom_target_pwr = eep->cal_target_power_cck; 793 794 /* 795 * create array of channels and targetpower from 796 * targetpower piers stored on eeprom 797 */ 798 for (i = 0; i < num_piers; i++) { 799 freq_array[i] = FBIN2FREQ(p_freq_bin[i], 1); 800 target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; 801 } 802 803 /* interpolate to get target power for given frequency */ 804 return 805 ((u_int8_t)interpolate( 806 (int32_t)freq, freq_array, target_power_array, num_piers)); 807} 808 809/* 810 * Set tx power registers to array of values passed in 811 */ 812int 813ar9300_transmit_power_reg_write(struct ath_hal *ah, u_int8_t *p_pwr_array) 814{ 815#define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) 816 /* make sure forced gain is not set */ 817#if 0 818 field_write("force_dac_gain", 0); 819 OS_REG_WRITE(ah, 0xa3f8, 0); 820 field_write("force_tx_gain", 0); 821#endif 822 823 OS_REG_WRITE(ah, 0xa458, 0); 824 825 /* Write the OFDM power per rate set */ 826 /* 6 (LSB), 9, 12, 18 (MSB) */ 827 OS_REG_WRITE(ah, 0xa3c0, 828 POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 24) 829 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 16) 830 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 8) 831 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0) 832 ); 833 /* 24 (LSB), 36, 48, 54 (MSB) */ 834 OS_REG_WRITE(ah, 0xa3c4, 835 POW_SM(p_pwr_array[ALL_TARGET_LEGACY_54], 24) 836 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_48], 16) 837 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_36], 8) 838 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0) 839 ); 840 841 /* Write the CCK power per rate set */ 842 /* 1L (LSB), reserved, 2L, 2S (MSB) */ 843 OS_REG_WRITE(ah, 0xa3c8, 844 POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 24) 845 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 16) 846/* | POW_SM(tx_power_times2, 8)*/ /* this is reserved for Osprey */ 847 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0) 848 ); 849 /* 5.5L (LSB), 5.5S, 11L, 11S (MSB) */ 850 OS_REG_WRITE(ah, 0xa3cc, 851 POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11S], 24) 852 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11L], 16) 853 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_5S], 8) 854 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0) 855 ); 856 857 /* write the power for duplicated frames - HT40 */ 858 /* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */ 859 OS_REG_WRITE(ah, 0xa3e0, 860 POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 24) 861 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 16) 862 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 8) 863 | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0) 864 ); 865 866 /* Write the HT20 power per rate set */ 867 /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ 868 OS_REG_WRITE(ah, 0xa3d0, 869 POW_SM(p_pwr_array[ALL_TARGET_HT20_5], 24) 870 | POW_SM(p_pwr_array[ALL_TARGET_HT20_4], 16) 871 | POW_SM(p_pwr_array[ALL_TARGET_HT20_1_3_9_11_17_19], 8) 872 | POW_SM(p_pwr_array[ALL_TARGET_HT20_0_8_16], 0) 873 ); 874 875 /* 6 (LSB), 7, 12, 13 (MSB) */ 876 OS_REG_WRITE(ah, 0xa3d4, 877 POW_SM(p_pwr_array[ALL_TARGET_HT20_13], 24) 878 | POW_SM(p_pwr_array[ALL_TARGET_HT20_12], 16) 879 | POW_SM(p_pwr_array[ALL_TARGET_HT20_7], 8) 880 | POW_SM(p_pwr_array[ALL_TARGET_HT20_6], 0) 881 ); 882 883 /* 14 (LSB), 15, 20, 21 */ 884 OS_REG_WRITE(ah, 0xa3e4, 885 POW_SM(p_pwr_array[ALL_TARGET_HT20_21], 24) 886 | POW_SM(p_pwr_array[ALL_TARGET_HT20_20], 16) 887 | POW_SM(p_pwr_array[ALL_TARGET_HT20_15], 8) 888 | POW_SM(p_pwr_array[ALL_TARGET_HT20_14], 0) 889 ); 890 891 /* Mixed HT20 and HT40 rates */ 892 /* HT20 22 (LSB), HT20 23, HT40 22, HT40 23 (MSB) */ 893 OS_REG_WRITE(ah, 0xa3e8, 894 POW_SM(p_pwr_array[ALL_TARGET_HT40_23], 24) 895 | POW_SM(p_pwr_array[ALL_TARGET_HT40_22], 16) 896 | POW_SM(p_pwr_array[ALL_TARGET_HT20_23], 8) 897 | POW_SM(p_pwr_array[ALL_TARGET_HT20_22], 0) 898 ); 899 900 /* Write the HT40 power per rate set */ 901 /* correct PAR difference between HT40 and HT20/LEGACY */ 902 /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ 903 OS_REG_WRITE(ah, 0xa3d8, 904 POW_SM(p_pwr_array[ALL_TARGET_HT40_5], 24) 905 | POW_SM(p_pwr_array[ALL_TARGET_HT40_4], 16) 906 | POW_SM(p_pwr_array[ALL_TARGET_HT40_1_3_9_11_17_19], 8) 907 | POW_SM(p_pwr_array[ALL_TARGET_HT40_0_8_16], 0) 908 ); 909 910 /* 6 (LSB), 7, 12, 13 (MSB) */ 911 OS_REG_WRITE(ah, 0xa3dc, 912 POW_SM(p_pwr_array[ALL_TARGET_HT40_13], 24) 913 | POW_SM(p_pwr_array[ALL_TARGET_HT40_12], 16) 914 | POW_SM(p_pwr_array[ALL_TARGET_HT40_7], 8) 915 | POW_SM(p_pwr_array[ALL_TARGET_HT40_6], 0) 916 ); 917 918 /* 14 (LSB), 15, 20, 21 */ 919 OS_REG_WRITE(ah, 0xa3ec, 920 POW_SM(p_pwr_array[ALL_TARGET_HT40_21], 24) 921 | POW_SM(p_pwr_array[ALL_TARGET_HT40_20], 16) 922 | POW_SM(p_pwr_array[ALL_TARGET_HT40_15], 8) 923 | POW_SM(p_pwr_array[ALL_TARGET_HT40_14], 0) 924 ); 925 926 return 0; 927#undef POW_SM 928} 929 930static void 931ar9300_selfgen_tpc_reg_write(struct ath_hal *ah, const struct ieee80211_channel *chan, 932 u_int8_t *p_pwr_array) 933{ 934 u_int32_t tpc_reg_val; 935 936 /* Set the target power values for self generated frames (ACK,RTS/CTS) to 937 * be within limits. This is just a safety measure.With per packet TPC mode 938 * enabled the target power value used with self generated frames will be 939 * MIN( TPC reg, BB_powertx_rate register) 940 */ 941 942 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 943 tpc_reg_val = (SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], AR_TPC_ACK) | 944 SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], AR_TPC_CTS) | 945 SM(0x3f, AR_TPC_CHIRP) | 946 SM(0x3f, AR_TPC_RPT)); 947 } else { 948 tpc_reg_val = (SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], AR_TPC_ACK) | 949 SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], AR_TPC_CTS) | 950 SM(0x3f, AR_TPC_CHIRP) | 951 SM(0x3f, AR_TPC_RPT)); 952 } 953 OS_REG_WRITE(ah, AR_TPC, tpc_reg_val); 954} 955 956void 957ar9300_set_target_power_from_eeprom(struct ath_hal *ah, u_int16_t freq, 958 u_int8_t *target_power_val_t2) 959{ 960 /* hard code for now, need to get from eeprom struct */ 961 u_int8_t ht40_power_inc_for_pdadc = 0; 962 HAL_BOOL is_2ghz = 0; 963 964 if (freq < 4000) { 965 is_2ghz = 1; 966 } 967 968 target_power_val_t2[ALL_TARGET_LEGACY_6_24] = 969 ar9300_eeprom_get_legacy_trgt_pwr( 970 ah, LEGACY_TARGET_RATE_6_24, freq, is_2ghz); 971 target_power_val_t2[ALL_TARGET_LEGACY_36] = 972 ar9300_eeprom_get_legacy_trgt_pwr( 973 ah, LEGACY_TARGET_RATE_36, freq, is_2ghz); 974 target_power_val_t2[ALL_TARGET_LEGACY_48] = 975 ar9300_eeprom_get_legacy_trgt_pwr( 976 ah, LEGACY_TARGET_RATE_48, freq, is_2ghz); 977 target_power_val_t2[ALL_TARGET_LEGACY_54] = 978 ar9300_eeprom_get_legacy_trgt_pwr( 979 ah, LEGACY_TARGET_RATE_54, freq, is_2ghz); 980 target_power_val_t2[ALL_TARGET_LEGACY_1L_5L] = 981 ar9300_eeprom_get_cck_trgt_pwr( 982 ah, LEGACY_TARGET_RATE_1L_5L, freq); 983 target_power_val_t2[ALL_TARGET_LEGACY_5S] = 984 ar9300_eeprom_get_cck_trgt_pwr( 985 ah, LEGACY_TARGET_RATE_5S, freq); 986 target_power_val_t2[ALL_TARGET_LEGACY_11L] = 987 ar9300_eeprom_get_cck_trgt_pwr( 988 ah, LEGACY_TARGET_RATE_11L, freq); 989 target_power_val_t2[ALL_TARGET_LEGACY_11S] = 990 ar9300_eeprom_get_cck_trgt_pwr( 991 ah, LEGACY_TARGET_RATE_11S, freq); 992 target_power_val_t2[ALL_TARGET_HT20_0_8_16] = 993 ar9300_eeprom_get_ht20_trgt_pwr( 994 ah, HT_TARGET_RATE_0_8_16, freq, is_2ghz); 995 target_power_val_t2[ALL_TARGET_HT20_1_3_9_11_17_19] = 996 ar9300_eeprom_get_ht20_trgt_pwr( 997 ah, HT_TARGET_RATE_1_3_9_11_17_19, freq, is_2ghz); 998 target_power_val_t2[ALL_TARGET_HT20_4] = 999 ar9300_eeprom_get_ht20_trgt_pwr( 1000 ah, HT_TARGET_RATE_4, freq, is_2ghz); 1001 target_power_val_t2[ALL_TARGET_HT20_5] = 1002 ar9300_eeprom_get_ht20_trgt_pwr( 1003 ah, HT_TARGET_RATE_5, freq, is_2ghz); 1004 target_power_val_t2[ALL_TARGET_HT20_6] = 1005 ar9300_eeprom_get_ht20_trgt_pwr( 1006 ah, HT_TARGET_RATE_6, freq, is_2ghz); 1007 target_power_val_t2[ALL_TARGET_HT20_7] = 1008 ar9300_eeprom_get_ht20_trgt_pwr( 1009 ah, HT_TARGET_RATE_7, freq, is_2ghz); 1010 target_power_val_t2[ALL_TARGET_HT20_12] = 1011 ar9300_eeprom_get_ht20_trgt_pwr( 1012 ah, HT_TARGET_RATE_12, freq, is_2ghz); 1013 target_power_val_t2[ALL_TARGET_HT20_13] = 1014 ar9300_eeprom_get_ht20_trgt_pwr( 1015 ah, HT_TARGET_RATE_13, freq, is_2ghz); 1016 target_power_val_t2[ALL_TARGET_HT20_14] = 1017 ar9300_eeprom_get_ht20_trgt_pwr( 1018 ah, HT_TARGET_RATE_14, freq, is_2ghz); 1019 target_power_val_t2[ALL_TARGET_HT20_15] = 1020 ar9300_eeprom_get_ht20_trgt_pwr( 1021 ah, HT_TARGET_RATE_15, freq, is_2ghz); 1022 target_power_val_t2[ALL_TARGET_HT20_20] = 1023 ar9300_eeprom_get_ht20_trgt_pwr( 1024 ah, HT_TARGET_RATE_20, freq, is_2ghz); 1025 target_power_val_t2[ALL_TARGET_HT20_21] = 1026 ar9300_eeprom_get_ht20_trgt_pwr( 1027 ah, HT_TARGET_RATE_21, freq, is_2ghz); 1028 target_power_val_t2[ALL_TARGET_HT20_22] = 1029 ar9300_eeprom_get_ht20_trgt_pwr( 1030 ah, HT_TARGET_RATE_22, freq, is_2ghz); 1031 target_power_val_t2[ALL_TARGET_HT20_23] = 1032 ar9300_eeprom_get_ht20_trgt_pwr( 1033 ah, HT_TARGET_RATE_23, freq, is_2ghz); 1034 target_power_val_t2[ALL_TARGET_HT40_0_8_16] = 1035 ar9300_eeprom_get_ht40_trgt_pwr( 1036 ah, HT_TARGET_RATE_0_8_16, freq, is_2ghz) + 1037 ht40_power_inc_for_pdadc; 1038 target_power_val_t2[ALL_TARGET_HT40_1_3_9_11_17_19] = 1039 ar9300_eeprom_get_ht40_trgt_pwr( 1040 ah, HT_TARGET_RATE_1_3_9_11_17_19, freq, is_2ghz) + 1041 ht40_power_inc_for_pdadc; 1042 target_power_val_t2[ALL_TARGET_HT40_4] = 1043 ar9300_eeprom_get_ht40_trgt_pwr( 1044 ah, HT_TARGET_RATE_4, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1045 target_power_val_t2[ALL_TARGET_HT40_5] = 1046 ar9300_eeprom_get_ht40_trgt_pwr( 1047 ah, HT_TARGET_RATE_5, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1048 target_power_val_t2[ALL_TARGET_HT40_6] = 1049 ar9300_eeprom_get_ht40_trgt_pwr( 1050 ah, HT_TARGET_RATE_6, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1051 target_power_val_t2[ALL_TARGET_HT40_7] = 1052 ar9300_eeprom_get_ht40_trgt_pwr( 1053 ah, HT_TARGET_RATE_7, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1054 target_power_val_t2[ALL_TARGET_HT40_12] = 1055 ar9300_eeprom_get_ht40_trgt_pwr( 1056 ah, HT_TARGET_RATE_12, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1057 target_power_val_t2[ALL_TARGET_HT40_13] = 1058 ar9300_eeprom_get_ht40_trgt_pwr( 1059 ah, HT_TARGET_RATE_13, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1060 target_power_val_t2[ALL_TARGET_HT40_14] = 1061 ar9300_eeprom_get_ht40_trgt_pwr( 1062 ah, HT_TARGET_RATE_14, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1063 target_power_val_t2[ALL_TARGET_HT40_15] = 1064 ar9300_eeprom_get_ht40_trgt_pwr( 1065 ah, HT_TARGET_RATE_15, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1066 target_power_val_t2[ALL_TARGET_HT40_20] = 1067 ar9300_eeprom_get_ht40_trgt_pwr( 1068 ah, HT_TARGET_RATE_20, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1069 target_power_val_t2[ALL_TARGET_HT40_21] = 1070 ar9300_eeprom_get_ht40_trgt_pwr( 1071 ah, HT_TARGET_RATE_21, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1072 target_power_val_t2[ALL_TARGET_HT40_22] = 1073 ar9300_eeprom_get_ht40_trgt_pwr( 1074 ah, HT_TARGET_RATE_22, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1075 target_power_val_t2[ALL_TARGET_HT40_23] = 1076 ar9300_eeprom_get_ht40_trgt_pwr( 1077 ah, HT_TARGET_RATE_23, freq, is_2ghz) + ht40_power_inc_for_pdadc; 1078 1079#ifdef AH_DEBUG 1080 { 1081 int i = 0; 1082 1083 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: APPLYING TARGET POWERS\n", __func__); 1084 while (i < ar9300_rate_size) { 1085 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x ", 1086 __func__, i, target_power_val_t2[i]); 1087 i++; 1088 if (i == ar9300_rate_size) { 1089 break; 1090 } 1091 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x ", 1092 __func__, i, target_power_val_t2[i]); 1093 i++; 1094 if (i == ar9300_rate_size) { 1095 break; 1096 } 1097 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x ", 1098 __func__, i, target_power_val_t2[i]); 1099 i++; 1100 if (i == ar9300_rate_size) { 1101 break; 1102 } 1103 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x \n", 1104 __func__, i, target_power_val_t2[i]); 1105 i++; 1106 } 1107 } 1108#endif 1109} 1110 1111u_int16_t *ar9300_regulatory_domain_get(struct ath_hal *ah) 1112{ 1113 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1114 return eep->base_eep_header.reg_dmn; 1115} 1116 1117 1118int32_t 1119ar9300_eeprom_write_enable_gpio_get(struct ath_hal *ah) 1120{ 1121 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1122 return eep->base_eep_header.eeprom_write_enable_gpio; 1123} 1124 1125int32_t 1126ar9300_wlan_disable_gpio_get(struct ath_hal *ah) 1127{ 1128 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1129 return eep->base_eep_header.wlan_disable_gpio; 1130} 1131 1132int32_t 1133ar9300_wlan_led_gpio_get(struct ath_hal *ah) 1134{ 1135 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1136 return eep->base_eep_header.wlan_led_gpio; 1137} 1138 1139int32_t 1140ar9300_rx_band_select_gpio_get(struct ath_hal *ah) 1141{ 1142 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1143 return eep->base_eep_header.rx_band_select_gpio; 1144} 1145 1146/* 1147 * since valid noise floor values are negative, returns 1 on error 1148 */ 1149int32_t 1150ar9300_noise_floor_cal_or_power_get(struct ath_hal *ah, int32_t frequency, 1151 int32_t ichain, HAL_BOOL use_cal) 1152{ 1153 int nf_use = 1; /* start with an error return value */ 1154 int32_t fx[OSPREY_NUM_5G_CAL_PIERS + OSPREY_NUM_2G_CAL_PIERS]; 1155 int32_t nf[OSPREY_NUM_5G_CAL_PIERS + OSPREY_NUM_2G_CAL_PIERS]; 1156 int nnf; 1157 int is_2ghz; 1158 int ipier, npier; 1159 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1160 u_int8_t *p_cal_pier; 1161 OSP_CAL_DATA_PER_FREQ_OP_LOOP *p_cal_pier_struct; 1162 1163 /* 1164 * check chain value 1165 */ 1166 if (ichain < 0 || ichain >= OSPREY_MAX_CHAINS) { 1167 return 1; 1168 } 1169 1170 /* figure out which band we're using */ 1171 is_2ghz = (frequency < 4000); 1172 if (is_2ghz) { 1173 npier = OSPREY_NUM_2G_CAL_PIERS; 1174 p_cal_pier = eep->cal_freq_pier_2g; 1175 p_cal_pier_struct = eep->cal_pier_data_2g[ichain]; 1176 } else { 1177 npier = OSPREY_NUM_5G_CAL_PIERS; 1178 p_cal_pier = eep->cal_freq_pier_5g; 1179 p_cal_pier_struct = eep->cal_pier_data_5g[ichain]; 1180 } 1181 /* look for valid noise floor values */ 1182 nnf = 0; 1183 for (ipier = 0; ipier < npier; ipier++) { 1184 fx[nnf] = FBIN2FREQ(p_cal_pier[ipier], is_2ghz); 1185 nf[nnf] = use_cal ? 1186 p_cal_pier_struct[ipier].rx_noisefloor_cal : 1187 p_cal_pier_struct[ipier].rx_noisefloor_power; 1188 if (nf[nnf] < 0) { 1189 nnf++; 1190 } 1191 } 1192 /* 1193 * If we have some valid values, interpolate to find the value 1194 * at the desired frequency. 1195 */ 1196 if (nnf > 0) { 1197 nf_use = interpolate(frequency, fx, nf, nnf); 1198 } 1199 1200 return nf_use; 1201} 1202 1203int32_t ar9300_rx_gain_index_get(struct ath_hal *ah) 1204{ 1205 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1206 1207 return (eep->base_eep_header.txrxgain) & 0xf; /* bits 3:0 */ 1208} 1209 1210 1211int32_t ar9300_tx_gain_index_get(struct ath_hal *ah) 1212{ 1213 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1214 1215 return (eep->base_eep_header.txrxgain >> 4) & 0xf; /* bits 7:4 */ 1216} 1217 1218HAL_BOOL ar9300_internal_regulator_apply(struct ath_hal *ah) 1219{ 1220 struct ath_hal_9300 *ahp = AH9300(ah); 1221 int internal_regulator = ar9300_eeprom_get(ahp, EEP_INTERNAL_REGULATOR); 1222 int reg_pmu1, reg_pmu2, reg_pmu1_set, reg_pmu2_set; 1223 u_int32_t reg_PMU1, reg_PMU2; 1224 unsigned long eep_addr; 1225 u_int32_t reg_val, reg_usb = 0, reg_pmu = 0; 1226 int usb_valid = 0, pmu_valid = 0; 1227 unsigned char pmu_refv; 1228 1229 if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { 1230 reg_PMU1 = AR_PHY_PMU1_JUPITER; 1231 reg_PMU2 = AR_PHY_PMU2_JUPITER; 1232 } 1233 else { 1234 reg_PMU1 = AR_PHY_PMU1; 1235 reg_PMU2 = AR_PHY_PMU2; 1236 } 1237 1238 if (internal_regulator) { 1239 if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah)) { 1240 if (AR_SREV_HORNET(ah)) { 1241 /* Read OTP first */ 1242 for (eep_addr = 0x14; ; eep_addr -= 0x10) { 1243 1244 ar9300_otp_read(ah, eep_addr / 4, ®_val, 1); 1245 1246 if ((reg_val & 0x80) == 0x80){ 1247 usb_valid = 1; 1248 reg_usb = reg_val & 0x000000ff; 1249 } 1250 1251 if ((reg_val & 0x80000000) == 0x80000000){ 1252 pmu_valid = 1; 1253 reg_pmu = (reg_val & 0xff000000) >> 24; 1254 } 1255 1256 if (eep_addr == 0x4) { 1257 break; 1258 } 1259 } 1260 1261 if (pmu_valid) { 1262 pmu_refv = reg_pmu & 0xf; 1263 } else { 1264 pmu_refv = 0x8; 1265 } 1266 1267 /* 1268 * If (valid) { 1269 * Usb_phy_ctrl2_tx_cal_en -> 0 1270 * Usb_phy_ctrl2_tx_cal_sel -> 0 1271 * Usb_phy_ctrl2_tx_man_cal -> 0, 1, 3, 7 or 15 from OTP 1272 * } 1273 */ 1274 if (usb_valid) { 1275 OS_REG_RMW_FIELD(ah, 0x16c88, AR_PHY_CTRL2_TX_CAL_EN, 0x0); 1276 OS_REG_RMW_FIELD(ah, 0x16c88, AR_PHY_CTRL2_TX_CAL_SEL, 0x0); 1277 OS_REG_RMW_FIELD(ah, 0x16c88, 1278 AR_PHY_CTRL2_TX_MAN_CAL, (reg_usb & 0xf)); 1279 } 1280 1281 } else { 1282 pmu_refv = 0x8; 1283 } 1284 /*#ifndef USE_HIF*/ 1285 /* Follow the MDK settings for Hornet PMU. 1286 * my $pwd = 0x0; 1287 * my $Nfdiv = 0x3; # xtal_freq = 25MHz 1288 * my $Nfdiv = 0x4; # xtal_freq = 40MHz 1289 * my $Refv = 0x7; # 0x5:1.22V; 0x8:1.29V 1290 * my $Gm1 = 0x3; #Poseidon $Gm1=1 1291 * my $classb = 0x0; 1292 * my $Cc = 0x1; #Poseidon $Cc=7 1293 * my $Rc = 0x6; 1294 * my $ramp_slope = 0x1; 1295 * my $Segm = 0x3; 1296 * my $use_local_osc = 0x0; 1297 * my $force_xosc_stable = 0x0; 1298 * my $Selfb = 0x0; #Poseidon $Selfb=1 1299 * my $Filterfb = 0x3; #Poseidon $Filterfb=0 1300 * my $Filtervc = 0x0; 1301 * my $disc = 0x0; 1302 * my $discdel = 0x4; 1303 * my $spare = 0x0; 1304 * $reg_PMU1 = 1305 * $pwd | ($Nfdiv<<1) | ($Refv<<4) | ($Gm1<<8) | 1306 * ($classb<<11) | ($Cc<<14) | ($Rc<<17) | ($ramp_slope<<20) | 1307 * ($Segm<<24) | ($use_local_osc<<26) | 1308 * ($force_xosc_stable<<27) | ($Selfb<<28) | ($Filterfb<<29); 1309 * $reg_PMU2 = $handle->reg_rd("ch0_PMU2"); 1310 * $reg_PMU2 = ($reg_PMU2 & 0xfe3fffff) | ($Filtervc<<22); 1311 * $reg_PMU2 = ($reg_PMU2 & 0xe3ffffff) | ($discdel<<26); 1312 * $reg_PMU2 = ($reg_PMU2 & 0x1fffffff) | ($spare<<29); 1313 */ 1314 if (ahp->clk_25mhz) { 1315 reg_pmu1_set = 0 | 1316 (3 << 1) | (pmu_refv << 4) | (3 << 8) | (0 << 11) | 1317 (1 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | 1318 (0 << 26) | (0 << 27) | (0 << 28) | (0 << 29); 1319 } else { 1320 if (AR_SREV_POSEIDON(ah)) { 1321 reg_pmu1_set = 0 | 1322 (5 << 1) | (7 << 4) | (2 << 8) | (0 << 11) | 1323 (2 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | 1324 (0 << 26) | (0 << 27) | (1 << 28) | (0 << 29) ; 1325 } else { 1326 reg_pmu1_set = 0 | 1327 (4 << 1) | (7 << 4) | (3 << 8) | (0 << 11) | 1328 (1 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | 1329 (0 << 26) | (0 << 27) | (0 << 28) | (0 << 29) ; 1330 } 1331 } 1332 OS_REG_RMW_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM, 0x0); 1333 1334 OS_REG_WRITE(ah, reg_PMU1, reg_pmu1_set); /* 0x638c8376 */ 1335 reg_pmu1 = OS_REG_READ(ah, reg_PMU1); 1336 while (reg_pmu1 != reg_pmu1_set) { 1337 OS_REG_WRITE(ah, reg_PMU1, reg_pmu1_set); /* 0x638c8376 */ 1338 OS_DELAY(10); 1339 reg_pmu1 = OS_REG_READ(ah, reg_PMU1); 1340 } 1341 1342 reg_pmu2_set = 1343 (OS_REG_READ(ah, reg_PMU2) & (~0xFFC00000)) | (4 << 26); 1344 OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); 1345 reg_pmu2 = OS_REG_READ(ah, reg_PMU2); 1346 while (reg_pmu2 != reg_pmu2_set) { 1347 OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); 1348 OS_DELAY(10); 1349 reg_pmu2 = OS_REG_READ(ah, reg_PMU2); 1350 } 1351 reg_pmu2_set = 1352 (OS_REG_READ(ah, reg_PMU2) & (~0x00200000)) | (1 << 21); 1353 OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); 1354 reg_pmu2 = OS_REG_READ(ah, reg_PMU2); 1355 while (reg_pmu2 != reg_pmu2_set) { 1356 OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); 1357 OS_DELAY(10); 1358 reg_pmu2 = OS_REG_READ(ah, reg_PMU2); 1359 } 1360 /*#endif*/ 1361 } else if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { 1362 /* Internal regulator is ON. Write swreg register. */ 1363 int swreg = ar9300_eeprom_get(ahp, EEP_SWREG); 1364 OS_REG_WRITE(ah, reg_PMU1, swreg); 1365 } else { 1366 /* Internal regulator is ON. Write swreg register. */ 1367 int swreg = ar9300_eeprom_get(ahp, EEP_SWREG); 1368 OS_REG_WRITE(ah, AR_RTC_REG_CONTROL1, 1369 OS_REG_READ(ah, AR_RTC_REG_CONTROL1) & 1370 (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM)); 1371 OS_REG_WRITE(ah, AR_RTC_REG_CONTROL0, swreg); 1372 /* Set REG_CONTROL1.SWREG_PROGRAM */ 1373 OS_REG_WRITE(ah, AR_RTC_REG_CONTROL1, 1374 OS_REG_READ(ah, AR_RTC_REG_CONTROL1) | 1375 AR_RTC_REG_CONTROL1_SWREG_PROGRAM); 1376 } 1377 } else { 1378 if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah)) { 1379 OS_REG_RMW_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM, 0x0); 1380 reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); 1381 while (reg_pmu2) { 1382 OS_DELAY(10); 1383 reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); 1384 } 1385 OS_REG_RMW_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD, 0x1); 1386 reg_pmu1 = OS_REG_READ_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD); 1387 while (!reg_pmu1) { 1388 OS_DELAY(10); 1389 reg_pmu1 = OS_REG_READ_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD); 1390 } 1391 OS_REG_RMW_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM, 0x1); 1392 reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); 1393 while (!reg_pmu2) { 1394 OS_DELAY(10); 1395 reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); 1396 } 1397 } else if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { 1398 OS_REG_RMW_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD, 0x1); 1399 } else { 1400 OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, 1401 (OS_REG_READ(ah, AR_RTC_SLEEP_CLK) | 1402 AR_RTC_FORCE_SWREG_PRD | AR_RTC_PCIE_RST_PWDN_EN)); 1403 } 1404 } 1405 1406 return 0; 1407} 1408 1409HAL_BOOL ar9300_drive_strength_apply(struct ath_hal *ah) 1410{ 1411 struct ath_hal_9300 *ahp = AH9300(ah); 1412 int drive_strength; 1413 unsigned long reg; 1414 1415 drive_strength = ar9300_eeprom_get(ahp, EEP_DRIVE_STRENGTH); 1416 if (drive_strength) { 1417 reg = OS_REG_READ(ah, AR_PHY_65NM_CH0_BIAS1); 1418 reg &= ~0x00ffffc0; 1419 reg |= 0x5 << 21; 1420 reg |= 0x5 << 18; 1421 reg |= 0x5 << 15; 1422 reg |= 0x5 << 12; 1423 reg |= 0x5 << 9; 1424 reg |= 0x5 << 6; 1425 OS_REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS1, reg); 1426 1427 reg = OS_REG_READ(ah, AR_PHY_65NM_CH0_BIAS2); 1428 reg &= ~0xffffffe0; 1429 reg |= 0x5 << 29; 1430 reg |= 0x5 << 26; 1431 reg |= 0x5 << 23; 1432 reg |= 0x5 << 20; 1433 reg |= 0x5 << 17; 1434 reg |= 0x5 << 14; 1435 reg |= 0x5 << 11; 1436 reg |= 0x5 << 8; 1437 reg |= 0x5 << 5; 1438 OS_REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS2, reg); 1439 1440 reg = OS_REG_READ(ah, AR_PHY_65NM_CH0_BIAS4); 1441 reg &= ~0xff800000; 1442 reg |= 0x5 << 29; 1443 reg |= 0x5 << 26; 1444 reg |= 0x5 << 23; 1445 OS_REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg); 1446 } 1447 return 0; 1448} 1449 1450int32_t ar9300_xpa_bias_level_get(struct ath_hal *ah, HAL_BOOL is_2ghz) 1451{ 1452 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1453 if (is_2ghz) { 1454 return eep->modal_header_2g.xpa_bias_lvl; 1455 } else { 1456 return eep->modal_header_5g.xpa_bias_lvl; 1457 } 1458} 1459 1460HAL_BOOL ar9300_xpa_bias_level_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) 1461{ 1462 /* 1463 * In ar9330 emu, we can't access radio registers, 1464 * merlin is used for radio part. 1465 */ 1466 int bias; 1467 bias = ar9300_xpa_bias_level_get(ah, is_2ghz); 1468 1469 if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah) || AR_SREV_WASP(ah)) { 1470 OS_REG_RMW_FIELD(ah, 1471 AR_HORNET_CH0_TOP2, AR_HORNET_CH0_TOP2_XPABIASLVL, bias); 1472 } else if (AR_SREV_SCORPION(ah)) { 1473 OS_REG_RMW_FIELD(ah, 1474 AR_SCORPION_CH0_TOP, AR_SCORPION_CH0_TOP_XPABIASLVL, bias); 1475 } else if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { 1476 OS_REG_RMW_FIELD(ah, 1477 AR_PHY_65NM_CH0_TOP_JUPITER, AR_PHY_65NM_CH0_TOP_XPABIASLVL, bias); 1478 } else { 1479 OS_REG_RMW_FIELD(ah, 1480 AR_PHY_65NM_CH0_TOP, AR_PHY_65NM_CH0_TOP_XPABIASLVL, bias); 1481 OS_REG_RMW_FIELD(ah, 1482 AR_PHY_65NM_CH0_THERM, AR_PHY_65NM_CH0_THERM_XPABIASLVL_MSB, 1483 bias >> 2); 1484 OS_REG_RMW_FIELD(ah, 1485 AR_PHY_65NM_CH0_THERM, AR_PHY_65NM_CH0_THERM_XPASHORT2GND, 1); 1486 } 1487 return 0; 1488} 1489 1490u_int32_t ar9300_ant_ctrl_common_get(struct ath_hal *ah, HAL_BOOL is_2ghz) 1491{ 1492 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1493 if (is_2ghz) { 1494 return eep->modal_header_2g.ant_ctrl_common; 1495 } else { 1496 return eep->modal_header_5g.ant_ctrl_common; 1497 } 1498} 1499static u_int16_t 1500ar9300_switch_com_spdt_get(struct ath_hal *ah, HAL_BOOL is_2ghz) 1501{ 1502 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1503 if (is_2ghz) { 1504 return eep->modal_header_2g.switchcomspdt; 1505 } else { 1506 return eep->modal_header_5g.switchcomspdt; 1507 } 1508} 1509u_int32_t ar9300_ant_ctrl_common2_get(struct ath_hal *ah, HAL_BOOL is_2ghz) 1510{ 1511 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1512 if (is_2ghz) { 1513 return eep->modal_header_2g.ant_ctrl_common2; 1514 } else { 1515 return eep->modal_header_5g.ant_ctrl_common2; 1516 } 1517} 1518 1519u_int16_t ar9300_ant_ctrl_chain_get(struct ath_hal *ah, int chain, 1520 HAL_BOOL is_2ghz) 1521{ 1522 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1523 if (chain >= 0 && chain < OSPREY_MAX_CHAINS) { 1524 if (is_2ghz) { 1525 return eep->modal_header_2g.ant_ctrl_chain[chain]; 1526 } else { 1527 return eep->modal_header_5g.ant_ctrl_chain[chain]; 1528 } 1529 } 1530 return 0; 1531} 1532 1533HAL_BOOL ar9300_ant_ctrl_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) 1534{ 1535 u_int32_t value; 1536 struct ath_hal_9300 *ahp = AH9300(ah); 1537 u_int32_t regval; 1538 struct ath_hal_private *ahpriv = AH_PRIVATE(ah); 1539#if ATH_ANT_DIV_COMB 1540 HAL_CAPABILITIES *pcap = &ahpriv->ah_caps; 1541#endif /* ATH_ANT_DIV_COMB */ 1542 u_int32_t xlan_gpio_cfg; 1543 u_int8_t i; 1544 1545 if (AR_SREV_POSEIDON(ah)) { 1546 xlan_gpio_cfg = ah->ah_config.ath_hal_ext_lna_ctl_gpio; 1547 if (xlan_gpio_cfg) { 1548 for (i = 0; i < 32; i++) { 1549 if (xlan_gpio_cfg & (1 << i)) { 1550 ath_hal_gpioCfgOutput(ah, i, 1551 HAL_GPIO_OUTPUT_MUX_PCIE_ATTENTION_LED); 1552 } 1553 } 1554 } 1555 } 1556#define AR_SWITCH_TABLE_COM_ALL (0xffff) 1557#define AR_SWITCH_TABLE_COM_ALL_S (0) 1558#define AR_SWITCH_TABLE_COM_JUPITER_ALL (0xffffff) 1559#define AR_SWITCH_TABLE_COM_JUPITER_ALL_S (0) 1560#define AR_SWITCH_TABLE_COM_SCORPION_ALL (0xffffff) 1561#define AR_SWITCH_TABLE_COM_SCORPION_ALL_S (0) 1562#define AR_SWITCH_TABLE_COM_SPDT (0x00f00000) 1563 value = ar9300_ant_ctrl_common_get(ah, is_2ghz); 1564 if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { 1565 if (AR_SREV_JUPITER_10(ah)) { 1566 /* Force SPDT setting for Jupiter 1.0 chips. */ 1567 value &= ~AR_SWITCH_TABLE_COM_SPDT; 1568 value |= 0x00100000; 1569 } 1570 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, 1571 AR_SWITCH_TABLE_COM_JUPITER_ALL, value); 1572 } 1573 else if (AR_SREV_SCORPION(ah)) { 1574 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, 1575 AR_SWITCH_TABLE_COM_SCORPION_ALL, value); 1576 } 1577 else { 1578 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, 1579 AR_SWITCH_TABLE_COM_ALL, value); 1580 } 1581/* 1582* Jupiter2.0 defines new switch table for BT/WLAN, 1583* here's new field name in WB222.ref for both 2G and 5G. 1584* Register: [GLB_CONTROL] GLB_CONTROL (@0x20044) 1585* 15:12 R/W SWITCH_TABLE_COM_SPDT_WLAN_RX SWITCH_TABLE_COM_SPDT_WLAN_RX 1586* 11:8 R/W SWITCH_TABLE_COM_SPDT_WLAN_TX SWITCH_TABLE_COM_SPDT_WLAN_TX 1587* 7:4 R/W SWITCH_TABLE_COM_SPDT_WLAN_IDLE SWITCH_TABLE_COM_SPDT_WLAN_IDLE 1588*/ 1589#define AR_SWITCH_TABLE_COM_SPDT_ALL (0x0000fff0) 1590#define AR_SWITCH_TABLE_COM_SPDT_ALL_S (4) 1591 if (AR_SREV_JUPITER_20_OR_LATER(ah) || AR_SREV_APHRODITE(ah)) { 1592 value = ar9300_switch_com_spdt_get(ah, is_2ghz); 1593 OS_REG_RMW_FIELD(ah, AR_GLB_CONTROL, 1594 AR_SWITCH_TABLE_COM_SPDT_ALL, value); 1595 1596 OS_REG_SET_BIT(ah, AR_GLB_CONTROL, 1597 AR_BTCOEX_CTRL_SPDT_ENABLE); 1598 //OS_REG_SET_BIT(ah, AR_GLB_CONTROL, 1599 // AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL); 1600 } 1601 1602#define AR_SWITCH_TABLE_COM2_ALL (0xffffff) 1603#define AR_SWITCH_TABLE_COM2_ALL_S (0) 1604 value = ar9300_ant_ctrl_common2_get(ah, is_2ghz); 1605#if ATH_ANT_DIV_COMB 1606 if ( AR_SREV_POSEIDON(ah) && (ahp->ah_lna_div_use_bt_ant_enable == TRUE) ) { 1607 value &= ~AR_SWITCH_TABLE_COM2_ALL; 1608 value |= ah->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable; 1609 } 1610#endif /* ATH_ANT_DIV_COMB */ 1611 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value); 1612 1613#define AR_SWITCH_TABLE_ALL (0xfff) 1614#define AR_SWITCH_TABLE_ALL_S (0) 1615 value = ar9300_ant_ctrl_chain_get(ah, 0, is_2ghz); 1616 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_0, AR_SWITCH_TABLE_ALL, value); 1617 1618 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah) && !AR_SREV_APHRODITE(ah)) { 1619 value = ar9300_ant_ctrl_chain_get(ah, 1, is_2ghz); 1620 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL, value); 1621 1622 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 1623 value = ar9300_ant_ctrl_chain_get(ah, 2, is_2ghz); 1624 OS_REG_RMW_FIELD(ah, 1625 AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL, value); 1626 } 1627 } 1628 if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah)) { 1629 value = ar9300_eeprom_get(ahp, EEP_ANTDIV_control); 1630 /* main_lnaconf, alt_lnaconf, main_tb, alt_tb */ 1631 regval = OS_REG_READ(ah, AR_PHY_MC_GAIN_CTRL); 1632 regval &= (~ANT_DIV_CONTROL_ALL); /* clear bit 25~30 */ 1633 regval |= (value & 0x3f) << ANT_DIV_CONTROL_ALL_S; 1634 /* enable_lnadiv */ 1635 regval &= (~MULTICHAIN_GAIN_CTRL__ENABLE_ANT_DIV_LNADIV__MASK); 1636 regval |= ((value >> 6) & 0x1) << 1637 MULTICHAIN_GAIN_CTRL__ENABLE_ANT_DIV_LNADIV__SHIFT; 1638#if ATH_ANT_DIV_COMB 1639 if ( AR_SREV_POSEIDON(ah) && (ahp->ah_lna_div_use_bt_ant_enable == TRUE) ) { 1640 regval |= ANT_DIV_ENABLE; 1641 } 1642#endif /* ATH_ANT_DIV_COMB */ 1643 OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); 1644 1645 /* enable fast_div */ 1646 regval = OS_REG_READ(ah, AR_PHY_CCK_DETECT); 1647 regval &= (~BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__MASK); 1648 regval |= ((value >> 7) & 0x1) << 1649 BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__SHIFT; 1650#if ATH_ANT_DIV_COMB 1651 if ( AR_SREV_POSEIDON(ah) && (ahp->ah_lna_div_use_bt_ant_enable == TRUE) ) { 1652 regval |= FAST_DIV_ENABLE; 1653 } 1654#endif /* ATH_ANT_DIV_COMB */ 1655 OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); 1656 } 1657 1658#if ATH_ANT_DIV_COMB 1659 if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON_11_OR_LATER(ah)) { 1660 if (pcap->halAntDivCombSupport) { 1661 /* If support DivComb, set MAIN to LNA1, ALT to LNA2 at beginning */ 1662 regval = OS_REG_READ(ah, AR_PHY_MC_GAIN_CTRL); 1663 /* clear bit 25~30 main_lnaconf, alt_lnaconf, main_tb, alt_tb */ 1664 regval &= (~(MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__MASK | 1665 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__MASK | 1666 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_GAINTB__MASK | 1667 MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_GAINTB__MASK)); 1668 regval |= (HAL_ANT_DIV_COMB_LNA1 << 1669 MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__SHIFT); 1670 regval |= (HAL_ANT_DIV_COMB_LNA2 << 1671 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__SHIFT); 1672 OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); 1673 } 1674 1675 } 1676#endif /* ATH_ANT_DIV_COMB */ 1677 if (AR_SREV_POSEIDON(ah) && ( ahp->ah_diversity_control == HAL_ANT_FIXED_A 1678 || ahp->ah_diversity_control == HAL_ANT_FIXED_B)) 1679 { 1680 u_int32_t reg_val = OS_REG_READ(ah, AR_PHY_MC_GAIN_CTRL); 1681 reg_val &= ~(MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__MASK | 1682 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__MASK | 1683 MULTICHAIN_GAIN_CTRL__ANT_FAST_DIV_BIAS__MASK | 1684 MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_GAINTB__MASK | 1685 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_GAINTB__MASK ); 1686 1687 switch (ahp->ah_diversity_control) { 1688 case HAL_ANT_FIXED_A: 1689 /* Enable first antenna only */ 1690 reg_val |= (HAL_ANT_DIV_COMB_LNA1 << 1691 MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__SHIFT); 1692 reg_val |= (HAL_ANT_DIV_COMB_LNA2 << 1693 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__SHIFT); 1694 /* main/alt gain table and Fast Div Bias all set to 0 */ 1695 OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, reg_val); 1696 regval = OS_REG_READ(ah, AR_PHY_CCK_DETECT); 1697 regval &= (~BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__MASK); 1698 OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); 1699 break; 1700 case HAL_ANT_FIXED_B: 1701 /* Enable second antenna only, after checking capability */ 1702 reg_val |= (HAL_ANT_DIV_COMB_LNA2 << 1703 MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__SHIFT); 1704 reg_val |= (HAL_ANT_DIV_COMB_LNA1 << 1705 MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__SHIFT); 1706 /* main/alt gain table and Fast Div all set to 0 */ 1707 OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, reg_val); 1708 regval = OS_REG_READ(ah, AR_PHY_CCK_DETECT); 1709 regval &= (~BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__MASK); 1710 OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); 1711 /* For WB225, need to swith ANT2 from BT to Wifi 1712 * This will not affect HB125 LNA diversity feature. 1713 */ 1714 OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, 1715 ah->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable); 1716 break; 1717 default: 1718 break; 1719 } 1720 } 1721 return 0; 1722} 1723 1724static u_int16_t 1725ar9300_attenuation_chain_get(struct ath_hal *ah, int chain, u_int16_t channel) 1726{ 1727 int32_t f[3], t[3]; 1728 u_int16_t value; 1729 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1730 if (chain >= 0 && chain < OSPREY_MAX_CHAINS) { 1731 if (channel < 4000) { 1732 return eep->modal_header_2g.xatten1_db[chain]; 1733 } else { 1734 if (eep->base_ext2.xatten1_db_low[chain] != 0) { 1735 t[0] = eep->base_ext2.xatten1_db_low[chain]; 1736 f[0] = 5180; 1737 t[1] = eep->modal_header_5g.xatten1_db[chain]; 1738 f[1] = 5500; 1739 t[2] = eep->base_ext2.xatten1_db_high[chain]; 1740 f[2] = 5785; 1741 value = interpolate(channel, f, t, 3); 1742 return value; 1743 } else { 1744 return eep->modal_header_5g.xatten1_db[chain]; 1745 } 1746 } 1747 } 1748 return 0; 1749} 1750 1751static u_int16_t 1752ar9300_attenuation_margin_chain_get(struct ath_hal *ah, int chain, 1753 u_int16_t channel) 1754{ 1755 int32_t f[3], t[3]; 1756 u_int16_t value; 1757 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1758 if (chain >= 0 && chain < OSPREY_MAX_CHAINS) { 1759 if (channel < 4000) { 1760 return eep->modal_header_2g.xatten1_margin[chain]; 1761 } else { 1762 if (eep->base_ext2.xatten1_margin_low[chain] != 0) { 1763 t[0] = eep->base_ext2.xatten1_margin_low[chain]; 1764 f[0] = 5180; 1765 t[1] = eep->modal_header_5g.xatten1_margin[chain]; 1766 f[1] = 5500; 1767 t[2] = eep->base_ext2.xatten1_margin_high[chain]; 1768 f[2] = 5785; 1769 value = interpolate(channel, f, t, 3); 1770 return value; 1771 } else { 1772 return eep->modal_header_5g.xatten1_margin[chain]; 1773 } 1774 } 1775 } 1776 return 0; 1777} 1778 1779HAL_BOOL ar9300_attenuation_apply(struct ath_hal *ah, u_int16_t channel) 1780{ 1781 u_int32_t value; 1782// struct ath_hal_private *ahpriv = AH_PRIVATE(ah); 1783 1784 /* Test value. if 0 then attenuation is unused. Don't load anything. */ 1785 value = ar9300_attenuation_chain_get(ah, 0, channel); 1786 OS_REG_RMW_FIELD(ah, 1787 AR_PHY_EXT_ATTEN_CTL_0, AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); 1788 value = ar9300_attenuation_margin_chain_get(ah, 0, channel); 1789 if (ar9300_rx_gain_index_get(ah) == 0 1790 && ah->ah_config.ath_hal_ext_atten_margin_cfg) 1791 { 1792 value = 5; 1793 } 1794 OS_REG_RMW_FIELD(ah, 1795 AR_PHY_EXT_ATTEN_CTL_0, AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, value); 1796 1797 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 1798 value = ar9300_attenuation_chain_get(ah, 1, channel); 1799 OS_REG_RMW_FIELD(ah, 1800 AR_PHY_EXT_ATTEN_CTL_1, AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); 1801 value = ar9300_attenuation_margin_chain_get(ah, 1, channel); 1802 OS_REG_RMW_FIELD(ah, 1803 AR_PHY_EXT_ATTEN_CTL_1, AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, 1804 value); 1805 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 1806 value = ar9300_attenuation_chain_get(ah, 2, channel); 1807 OS_REG_RMW_FIELD(ah, 1808 AR_PHY_EXT_ATTEN_CTL_2, AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); 1809 value = ar9300_attenuation_margin_chain_get(ah, 2, channel); 1810 OS_REG_RMW_FIELD(ah, 1811 AR_PHY_EXT_ATTEN_CTL_2, AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, 1812 value); 1813 } 1814 } 1815 return 0; 1816} 1817 1818static u_int16_t ar9300_quick_drop_get(struct ath_hal *ah, 1819 int chain, u_int16_t channel) 1820{ 1821 int32_t f[3], t[3]; 1822 u_int16_t value; 1823 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1824 1825 if (channel < 4000) { 1826 return eep->modal_header_2g.quick_drop; 1827 } else { 1828 t[0] = eep->base_ext1.quick_drop_low; 1829 f[0] = 5180; 1830 t[1] = eep->modal_header_5g.quick_drop; 1831 f[1] = 5500; 1832 t[2] = eep->base_ext1.quick_drop_high; 1833 f[2] = 5785; 1834 value = interpolate(channel, f, t, 3); 1835 return value; 1836 } 1837} 1838 1839 1840static HAL_BOOL ar9300_quick_drop_apply(struct ath_hal *ah, u_int16_t channel) 1841{ 1842 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1843 u_int32_t value; 1844 // 1845 // Test value. if 0 then quickDrop is unused. Don't load anything. 1846 // 1847 if (eep->base_eep_header.misc_configuration & 0x10) 1848 { 1849 if (AR_SREV_OSPREY(ah) || AR_SREV_AR9580(ah) || AR_SREV_WASP(ah)) 1850 { 1851 value = ar9300_quick_drop_get(ah, 0, channel); 1852 OS_REG_RMW_FIELD(ah, AR_PHY_AGC, AR_PHY_AGC_QUICK_DROP, value); 1853 } 1854 } 1855 return 0; 1856} 1857 1858static u_int16_t ar9300_tx_end_to_xpa_off_get(struct ath_hal *ah, u_int16_t channel) 1859{ 1860 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1861 1862 if (channel < 4000) { 1863 return eep->modal_header_2g.tx_end_to_xpa_off; 1864 } else { 1865 return eep->modal_header_5g.tx_end_to_xpa_off; 1866 } 1867} 1868 1869static HAL_BOOL ar9300_tx_end_to_xpab_off_apply(struct ath_hal *ah, u_int16_t channel) 1870{ 1871 u_int32_t value; 1872 1873 value = ar9300_tx_end_to_xpa_off_get(ah, channel); 1874 /* Apply to both xpaa and xpab */ 1875 if (AR_SREV_OSPREY(ah) || AR_SREV_AR9580(ah) || AR_SREV_WASP(ah)) 1876 { 1877 OS_REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL, 1878 AR_PHY_XPA_TIMING_CTL_TX_END_XPAB_OFF, value); 1879 OS_REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL, 1880 AR_PHY_XPA_TIMING_CTL_TX_END_XPAA_OFF, value); 1881 } 1882 return 0; 1883} 1884 1885static int 1886ar9300_eeprom_cal_pier_get(struct ath_hal *ah, int mode, int ipier, int ichain, 1887 int *pfrequency, int *pcorrection, int *ptemperature, int *pvoltage) 1888{ 1889 u_int8_t *p_cal_pier; 1890 OSP_CAL_DATA_PER_FREQ_OP_LOOP *p_cal_pier_struct; 1891 int is_2ghz; 1892 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 1893 1894 if (ichain >= OSPREY_MAX_CHAINS) { 1895 HALDEBUG(ah, HAL_DEBUG_EEPROM, 1896 "%s: Invalid chain index, must be less than %d\n", 1897 __func__, OSPREY_MAX_CHAINS); 1898 return -1; 1899 } 1900 1901 if (mode) {/* 5GHz */ 1902 if (ipier >= OSPREY_NUM_5G_CAL_PIERS){ 1903 HALDEBUG(ah, HAL_DEBUG_EEPROM, 1904 "%s: Invalid 5GHz cal pier index, must be less than %d\n", 1905 __func__, OSPREY_NUM_5G_CAL_PIERS); 1906 return -1; 1907 } 1908 p_cal_pier = &(eep->cal_freq_pier_5g[ipier]); 1909 p_cal_pier_struct = &(eep->cal_pier_data_5g[ichain][ipier]); 1910 is_2ghz = 0; 1911 } else { 1912 if (ipier >= OSPREY_NUM_2G_CAL_PIERS){ 1913 HALDEBUG(ah, HAL_DEBUG_EEPROM, 1914 "%s: Invalid 2GHz cal pier index, must be less than %d\n", 1915 __func__, OSPREY_NUM_2G_CAL_PIERS); 1916 return -1; 1917 } 1918 1919 p_cal_pier = &(eep->cal_freq_pier_2g[ipier]); 1920 p_cal_pier_struct = &(eep->cal_pier_data_2g[ichain][ipier]); 1921 is_2ghz = 1; 1922 } 1923 *pfrequency = FBIN2FREQ(*p_cal_pier, is_2ghz); 1924 *pcorrection = p_cal_pier_struct->ref_power; 1925 *ptemperature = p_cal_pier_struct->temp_meas; 1926 *pvoltage = p_cal_pier_struct->volt_meas; 1927 return 0; 1928} 1929 1930/* 1931 * Apply the recorded correction values. 1932 */ 1933static int 1934ar9300_calibration_apply(struct ath_hal *ah, int frequency) 1935{ 1936 struct ath_hal_9300 *ahp = AH9300(ah); 1937 1938 int ichain, ipier, npier; 1939 int mode; 1940 int fdiff; 1941 int pfrequency, pcorrection, ptemperature, pvoltage; 1942 int bf, factor, plus; 1943 1944 int lfrequency[AR9300_MAX_CHAINS]; 1945 int hfrequency[AR9300_MAX_CHAINS]; 1946 1947 int lcorrection[AR9300_MAX_CHAINS]; 1948 int hcorrection[AR9300_MAX_CHAINS]; 1949 int correction[AR9300_MAX_CHAINS]; 1950 1951 int ltemperature[AR9300_MAX_CHAINS]; 1952 int htemperature[AR9300_MAX_CHAINS]; 1953 int temperature[AR9300_MAX_CHAINS]; 1954 1955 int lvoltage[AR9300_MAX_CHAINS]; 1956 int hvoltage[AR9300_MAX_CHAINS]; 1957 int voltage[AR9300_MAX_CHAINS]; 1958 1959 mode = (frequency >= 4000); 1960 npier = (mode) ? OSPREY_NUM_5G_CAL_PIERS : OSPREY_NUM_2G_CAL_PIERS; 1961 1962 for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { 1963 lfrequency[ichain] = 0; 1964 hfrequency[ichain] = 100000; 1965 } 1966 /* 1967 * identify best lower and higher frequency calibration measurement 1968 */ 1969 for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { 1970 for (ipier = 0; ipier < npier; ipier++) { 1971 if (ar9300_eeprom_cal_pier_get( 1972 ah, mode, ipier, ichain, 1973 &pfrequency, &pcorrection, &ptemperature, &pvoltage) == 0) 1974 { 1975 fdiff = frequency - pfrequency; 1976 /* 1977 * this measurement is higher than our desired frequency 1978 */ 1979 if (fdiff <= 0) { 1980 if (hfrequency[ichain] <= 0 || 1981 hfrequency[ichain] >= 100000 || 1982 fdiff > (frequency - hfrequency[ichain])) 1983 { 1984 /* 1985 * new best higher frequency measurement 1986 */ 1987 hfrequency[ichain] = pfrequency; 1988 hcorrection[ichain] = pcorrection; 1989 htemperature[ichain] = ptemperature; 1990 hvoltage[ichain] = pvoltage; 1991 } 1992 } 1993 if (fdiff >= 0) { 1994 if (lfrequency[ichain] <= 0 || 1995 fdiff < (frequency - lfrequency[ichain])) 1996 { 1997 /* 1998 * new best lower frequency measurement 1999 */ 2000 lfrequency[ichain] = pfrequency; 2001 lcorrection[ichain] = pcorrection; 2002 ltemperature[ichain] = ptemperature; 2003 lvoltage[ichain] = pvoltage; 2004 } 2005 } 2006 } 2007 } 2008 } 2009 /* interpolate */ 2010 for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { 2011 HALDEBUG(ah, HAL_DEBUG_EEPROM, 2012 "%s: ch=%d f=%d low=%d %d h=%d %d\n", 2013 __func__, ichain, frequency, 2014 lfrequency[ichain], lcorrection[ichain], 2015 hfrequency[ichain], hcorrection[ichain]); 2016 /* 2017 * they're the same, so just pick one 2018 */ 2019 if (hfrequency[ichain] == lfrequency[ichain]) { 2020 correction[ichain] = lcorrection[ichain]; 2021 voltage[ichain] = lvoltage[ichain]; 2022 temperature[ichain] = ltemperature[ichain]; 2023 } else if (frequency - lfrequency[ichain] < 1000) { 2024 /* the low frequency is good */ 2025 if (hfrequency[ichain] - frequency < 1000) { 2026 /* 2027 * The high frequency is good too - 2028 * interpolate with round off. 2029 */ 2030 int mult, div, diff; 2031 mult = frequency - lfrequency[ichain]; 2032 div = hfrequency[ichain] - lfrequency[ichain]; 2033 2034 diff = hcorrection[ichain] - lcorrection[ichain]; 2035 bf = 2 * diff * mult / div; 2036 plus = (bf % 2); 2037 factor = bf / 2; 2038 correction[ichain] = lcorrection[ichain] + factor + plus; 2039 2040 diff = htemperature[ichain] - ltemperature[ichain]; 2041 bf = 2 * diff * mult / div; 2042 plus = (bf % 2); 2043 factor = bf / 2; 2044 temperature[ichain] = ltemperature[ichain] + factor + plus; 2045 2046 diff = hvoltage[ichain] - lvoltage[ichain]; 2047 bf = 2 * diff * mult / div; 2048 plus = (bf % 2); 2049 factor = bf / 2; 2050 voltage[ichain] = lvoltage[ichain] + factor + plus; 2051 } else { 2052 /* only low is good, use it */ 2053 correction[ichain] = lcorrection[ichain]; 2054 temperature[ichain] = ltemperature[ichain]; 2055 voltage[ichain] = lvoltage[ichain]; 2056 } 2057 } else if (hfrequency[ichain] - frequency < 1000) { 2058 /* only high is good, use it */ 2059 correction[ichain] = hcorrection[ichain]; 2060 temperature[ichain] = htemperature[ichain]; 2061 voltage[ichain] = hvoltage[ichain]; 2062 } else { 2063 /* nothing is good, presume 0???? */ 2064 correction[ichain] = 0; 2065 temperature[ichain] = 0; 2066 voltage[ichain] = 0; 2067 } 2068 } 2069 2070 /* GreenTx isn't currently supported */ 2071 /* GreenTx */ 2072 if (ah->ah_config.ath_hal_sta_update_tx_pwr_enable) { 2073 if (AR_SREV_POSEIDON(ah)) { 2074 /* Get calibrated OLPC gain delta value for GreenTx */ 2075 ahp->ah_db2[POSEIDON_STORED_REG_G2_OLPC_OFFSET] = 2076 (u_int32_t) correction[0]; 2077 } 2078 } 2079 2080 ar9300_power_control_override( 2081 ah, frequency, correction, voltage, temperature); 2082 HALDEBUG(ah, HAL_DEBUG_EEPROM, 2083 "%s: for frequency=%d, calibration correction = %d %d %d\n", 2084 __func__, frequency, correction[0], correction[1], correction[2]); 2085 2086 return 0; 2087} 2088 2089int 2090ar9300_power_control_override(struct ath_hal *ah, int frequency, 2091 int *correction, int *voltage, int *temperature) 2092{ 2093 int temp_slope = 0; 2094 int temp_slope_1 = 0; 2095 int temp_slope_2 = 0; 2096 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 2097 int32_t f[8], t[8],t1[3], t2[3]; 2098 int i; 2099 2100 OS_REG_RMW(ah, AR_PHY_TPC_11_B0, 2101 (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), 2102 AR_PHY_TPC_OLPC_GAIN_DELTA); 2103 if (!AR_SREV_POSEIDON(ah)) { 2104 OS_REG_RMW(ah, AR_PHY_TPC_11_B1, 2105 (correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), 2106 AR_PHY_TPC_OLPC_GAIN_DELTA); 2107 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 2108 OS_REG_RMW(ah, AR_PHY_TPC_11_B2, 2109 (correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), 2110 AR_PHY_TPC_OLPC_GAIN_DELTA); 2111 } 2112 } 2113 /* 2114 * enable open loop power control on chip 2115 */ 2116 OS_REG_RMW(ah, AR_PHY_TPC_6_B0, 2117 (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), AR_PHY_TPC_6_ERROR_EST_MODE); 2118 if (!AR_SREV_POSEIDON(ah)) { 2119 OS_REG_RMW(ah, AR_PHY_TPC_6_B1, 2120 (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), AR_PHY_TPC_6_ERROR_EST_MODE); 2121 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 2122 OS_REG_RMW(ah, AR_PHY_TPC_6_B2, 2123 (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), 2124 AR_PHY_TPC_6_ERROR_EST_MODE); 2125 } 2126 } 2127 2128 /* 2129 * Enable temperature compensation 2130 * Need to use register names 2131 */ 2132 if (frequency < 4000) { 2133 temp_slope = eep->modal_header_2g.temp_slope; 2134 } else { 2135 if ((eep->base_eep_header.misc_configuration & 0x20) != 0) 2136 { 2137 for(i=0;i<8;i++) 2138 { 2139 t[i]=eep->base_ext1.tempslopextension[i]; 2140 f[i]=FBIN2FREQ(eep->cal_freq_pier_5g[i], 0); 2141 } 2142 temp_slope=interpolate(frequency,f,t,8); 2143 } 2144 else 2145 { 2146 if(!AR_SREV_SCORPION(ah)) { 2147 if (eep->base_ext2.temp_slope_low != 0) { 2148 t[0] = eep->base_ext2.temp_slope_low; 2149 f[0] = 5180; 2150 t[1] = eep->modal_header_5g.temp_slope; 2151 f[1] = 5500; 2152 t[2] = eep->base_ext2.temp_slope_high; 2153 f[2] = 5785; 2154 temp_slope = interpolate(frequency, f, t, 3); 2155 } else { 2156 temp_slope = eep->modal_header_5g.temp_slope; 2157 } 2158 } else { 2159 /* 2160 * Scorpion has individual chain tempslope values 2161 */ 2162 t[0] = eep->base_ext1.tempslopextension[2]; 2163 t1[0]= eep->base_ext1.tempslopextension[3]; 2164 t2[0]= eep->base_ext1.tempslopextension[4]; 2165 f[0] = 5180; 2166 t[1] = eep->modal_header_5g.temp_slope; 2167 t1[1]= eep->base_ext1.tempslopextension[0]; 2168 t2[1]= eep->base_ext1.tempslopextension[1]; 2169 f[1] = 5500; 2170 t[2] = eep->base_ext1.tempslopextension[5]; 2171 t1[2]= eep->base_ext1.tempslopextension[6]; 2172 t2[2]= eep->base_ext1.tempslopextension[7]; 2173 f[2] = 5785; 2174 temp_slope = interpolate(frequency, f, t, 3); 2175 temp_slope_1=interpolate(frequency, f, t1,3); 2176 temp_slope_2=interpolate(frequency, f, t2,3); 2177 } 2178 } 2179 } 2180 2181 if (!AR_SREV_SCORPION(ah)) { 2182 OS_REG_RMW_FIELD(ah, 2183 AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, temp_slope); 2184 } else { 2185 /*Scorpion has tempSlope register for each chain*/ 2186 /*Check whether temp_compensation feature is enabled or not*/ 2187 if (eep->base_eep_header.feature_enable & 0x1){ 2188 if(frequency < 4000) { 2189 OS_REG_RMW_FIELD(ah, 2190 AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, 2191 eep->base_ext2.temp_slope_low); 2192 OS_REG_RMW_FIELD(ah, 2193 AR_SCORPION_PHY_TPC_19_B1, AR_PHY_TPC_19_ALPHA_THERM, 2194 temp_slope); 2195 OS_REG_RMW_FIELD(ah, 2196 AR_SCORPION_PHY_TPC_19_B2, AR_PHY_TPC_19_ALPHA_THERM, 2197 eep->base_ext2.temp_slope_high); 2198 } else { 2199 OS_REG_RMW_FIELD(ah, 2200 AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, 2201 temp_slope); 2202 OS_REG_RMW_FIELD(ah, 2203 AR_SCORPION_PHY_TPC_19_B1, AR_PHY_TPC_19_ALPHA_THERM, 2204 temp_slope_1); 2205 OS_REG_RMW_FIELD(ah, 2206 AR_SCORPION_PHY_TPC_19_B2, AR_PHY_TPC_19_ALPHA_THERM, 2207 temp_slope_2); 2208 } 2209 }else { 2210 /* If temp compensation is not enabled, set all registers to 0*/ 2211 OS_REG_RMW_FIELD(ah, 2212 AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, 0); 2213 OS_REG_RMW_FIELD(ah, 2214 AR_SCORPION_PHY_TPC_19_B1, AR_PHY_TPC_19_ALPHA_THERM, 0); 2215 OS_REG_RMW_FIELD(ah, 2216 AR_SCORPION_PHY_TPC_19_B2, AR_PHY_TPC_19_ALPHA_THERM, 0); 2217 } 2218 } 2219 OS_REG_RMW_FIELD(ah, 2220 AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE, temperature[0]); 2221 2222 return 0; 2223} 2224 2225/************************************************************** 2226 * ar9300_eep_def_get_max_edge_power 2227 * 2228 * Find the maximum conformance test limit for the given channel and CTL info 2229 */ 2230static inline u_int16_t 2231ar9300_eep_def_get_max_edge_power(ar9300_eeprom_t *p_eep_data, u_int16_t freq, 2232 int idx, HAL_BOOL is_2ghz) 2233{ 2234 u_int16_t twice_max_edge_power = AR9300_MAX_RATE_POWER; 2235 u_int8_t *ctl_freqbin = is_2ghz ? 2236 &p_eep_data->ctl_freqbin_2G[idx][0] : 2237 &p_eep_data->ctl_freqbin_5G[idx][0]; 2238 u_int16_t num_edges = is_2ghz ? 2239 OSPREY_NUM_BAND_EDGES_2G : OSPREY_NUM_BAND_EDGES_5G; 2240 int i; 2241 2242 /* Get the edge power */ 2243 for (i = 0; (i < num_edges) && (ctl_freqbin[i] != AR9300_BCHAN_UNUSED); i++) 2244 { 2245 /* 2246 * If there's an exact channel match or an inband flag set 2247 * on the lower channel use the given rd_edge_power 2248 */ 2249 if (freq == fbin2freq(ctl_freqbin[i], is_2ghz)) { 2250 if (is_2ghz) { 2251 twice_max_edge_power = 2252 p_eep_data->ctl_power_data_2g[idx].ctl_edges[i].t_power; 2253 } else { 2254 twice_max_edge_power = 2255 p_eep_data->ctl_power_data_5g[idx].ctl_edges[i].t_power; 2256 } 2257 break; 2258 } else if ((i > 0) && (freq < fbin2freq(ctl_freqbin[i], is_2ghz))) { 2259 if (is_2ghz) { 2260 if (fbin2freq(ctl_freqbin[i - 1], 1) < freq && 2261 p_eep_data->ctl_power_data_2g[idx].ctl_edges[i - 1].flag) 2262 { 2263 twice_max_edge_power = 2264 p_eep_data->ctl_power_data_2g[idx]. 2265 ctl_edges[i - 1].t_power; 2266 } 2267 } else { 2268 if (fbin2freq(ctl_freqbin[i - 1], 0) < freq && 2269 p_eep_data->ctl_power_data_5g[idx].ctl_edges[i - 1].flag) 2270 { 2271 twice_max_edge_power = 2272 p_eep_data->ctl_power_data_5g[idx]. 2273 ctl_edges[i - 1].t_power; 2274 } 2275 } 2276 /* 2277 * Leave loop - no more affecting edges possible 2278 * in this monotonic increasing list 2279 */ 2280 break; 2281 } 2282 } 2283 /* 2284 * EV89475: EEPROM might contain 0 txpower in CTL table for certain 2285 * 2.4GHz channels. We workaround it by overwriting 60 (30 dBm) here. 2286 */ 2287 if (is_2ghz && (twice_max_edge_power == 0)) { 2288 twice_max_edge_power = 60; 2289 } 2290 2291 HALASSERT(twice_max_edge_power > 0); 2292 return twice_max_edge_power; 2293} 2294 2295HAL_BOOL 2296ar9300_eeprom_set_power_per_rate_table( 2297 struct ath_hal *ah, 2298 ar9300_eeprom_t *p_eep_data, 2299 const struct ieee80211_channel *chan, 2300 u_int8_t *p_pwr_array, 2301 u_int16_t cfg_ctl, 2302 u_int16_t antenna_reduction, 2303 u_int16_t twice_max_regulatory_power, 2304 u_int16_t power_limit, 2305 u_int8_t chainmask) 2306{ 2307 /* Local defines to distinguish between extension and control CTL's */ 2308#define EXT_ADDITIVE (0x8000) 2309#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) 2310#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) 2311#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) 2312#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ 2313#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */ 2314#define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */ 2315#define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */ 2316#define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */ 2317 2318 static const u_int16_t tp_scale_reduction_table[5] = 2319 { 0, 3, 6, 9, AR9300_MAX_RATE_POWER }; 2320 int i; 2321 int16_t twice_largest_antenna; 2322 u_int16_t twice_antenna_reduction = 2*antenna_reduction ; 2323 int16_t scaled_power = 0, min_ctl_power, max_reg_allowed_power; 2324#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ 2325#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ 2326 u_int16_t ctl_modes_for11a[] = 2327 {CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40}; 2328 u_int16_t ctl_modes_for11g[] = 2329 {CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40}; 2330 u_int16_t num_ctl_modes, *p_ctl_mode, ctl_mode, freq; 2331 CHAN_CENTERS centers; 2332 int tx_chainmask; 2333 struct ath_hal_9300 *ahp = AH9300(ah); 2334 u_int8_t *ctl_index; 2335 u_int8_t ctl_num; 2336 u_int16_t twice_min_edge_power; 2337 u_int16_t twice_max_edge_power = AR9300_MAX_RATE_POWER; 2338#ifdef AH_DEBUG 2339 HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan); 2340#endif 2341 2342 tx_chainmask = chainmask ? chainmask : ahp->ah_tx_chainmask; 2343 2344 ar9300_get_channel_centers(ah, chan, ¢ers); 2345 2346 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 2347 ahp->twice_antenna_gain = p_eep_data->modal_header_2g.antenna_gain; 2348 } else { 2349 ahp->twice_antenna_gain = p_eep_data->modal_header_5g.antenna_gain; 2350 } 2351 2352 /* Save max allowed antenna gain to ease future lookups */ 2353 ahp->twice_antenna_reduction = twice_antenna_reduction; 2354 2355 /* Deduct antenna gain from EIRP to get the upper limit */ 2356 twice_largest_antenna = (int16_t)AH_MIN((twice_antenna_reduction - 2357 ahp->twice_antenna_gain), 0); 2358 max_reg_allowed_power = twice_max_regulatory_power + twice_largest_antenna; 2359 2360 /* Use ah_tp_scale - see bug 30070. */ 2361 if (AH_PRIVATE(ah)->ah_tpScale != HAL_TP_SCALE_MAX) { 2362 max_reg_allowed_power -= 2363 (tp_scale_reduction_table[(AH_PRIVATE(ah)->ah_tpScale)] * 2); 2364 } 2365 2366 scaled_power = AH_MIN(power_limit, max_reg_allowed_power); 2367 2368 /* 2369 * Reduce scaled Power by number of chains active to get to 2370 * per chain tx power level 2371 */ 2372 /* TODO: better value than these? */ 2373 switch (ar9300_get_ntxchains(tx_chainmask)) { 2374 case 1: 2375 ahp->upper_limit[0] = AH_MAX(0, scaled_power); 2376 break; 2377 case 2: 2378 scaled_power -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; 2379 ahp->upper_limit[1] = AH_MAX(0, scaled_power); 2380 break; 2381 case 3: 2382 scaled_power -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; 2383 ahp->upper_limit[2] = AH_MAX(0, scaled_power); 2384 break; 2385 default: 2386 HALASSERT(0); /* Unsupported number of chains */ 2387 } 2388 2389 scaled_power = AH_MAX(0, scaled_power); 2390 2391 /* Get target powers from EEPROM - our baseline for TX Power */ 2392 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 2393 /* Setup for CTL modes */ 2394 /* CTL_11B, CTL_11G, CTL_2GHT20 */ 2395 num_ctl_modes = 2396 ARRAY_LENGTH(ctl_modes_for11g) - SUB_NUM_CTL_MODES_AT_2G_40; 2397 p_ctl_mode = ctl_modes_for11g; 2398 2399 if (IEEE80211_IS_CHAN_HT40(chan)) { 2400 num_ctl_modes = ARRAY_LENGTH(ctl_modes_for11g); /* All 2G CTL's */ 2401 } 2402 } else { 2403 /* Setup for CTL modes */ 2404 /* CTL_11A, CTL_5GHT20 */ 2405 num_ctl_modes = 2406 ARRAY_LENGTH(ctl_modes_for11a) - SUB_NUM_CTL_MODES_AT_5G_40; 2407 p_ctl_mode = ctl_modes_for11a; 2408 2409 if (IEEE80211_IS_CHAN_HT40(chan)) { 2410 num_ctl_modes = ARRAY_LENGTH(ctl_modes_for11a); /* All 5G CTL's */ 2411 } 2412 } 2413 2414 /* 2415 * For MIMO, need to apply regulatory caps individually across dynamically 2416 * running modes: CCK, OFDM, HT20, HT40 2417 * 2418 * The outer loop walks through each possible applicable runtime mode. 2419 * The inner loop walks through each ctl_index entry in EEPROM. 2420 * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. 2421 * 2422 */ 2423 for (ctl_mode = 0; ctl_mode < num_ctl_modes; ctl_mode++) { 2424 HAL_BOOL is_ht40_ctl_mode = 2425 (p_ctl_mode[ctl_mode] == CTL_5GHT40) || 2426 (p_ctl_mode[ctl_mode] == CTL_2GHT40); 2427 if (is_ht40_ctl_mode) { 2428 freq = centers.synth_center; 2429 } else if (p_ctl_mode[ctl_mode] & EXT_ADDITIVE) { 2430 freq = centers.ext_center; 2431 } else { 2432 freq = centers.ctl_center; 2433 } 2434 2435 HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, 2436 "LOOP-Mode ctl_mode %d < %d, " 2437 "is_ht40_ctl_mode %d, EXT_ADDITIVE %d\n", 2438 ctl_mode, num_ctl_modes, is_ht40_ctl_mode, 2439 (p_ctl_mode[ctl_mode] & EXT_ADDITIVE)); 2440 /* walk through each CTL index stored in EEPROM */ 2441 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 2442 ctl_index = p_eep_data->ctl_index_2g; 2443 ctl_num = OSPREY_NUM_CTLS_2G; 2444 } else { 2445 ctl_index = p_eep_data->ctl_index_5g; 2446 ctl_num = OSPREY_NUM_CTLS_5G; 2447 } 2448 2449 for (i = 0; (i < ctl_num) && ctl_index[i]; i++) { 2450 HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, 2451 " LOOP-Ctlidx %d: cfg_ctl 0x%2.2x p_ctl_mode 0x%2.2x " 2452 "ctl_index 0x%2.2x chan %d chanctl 0x%x\n", 2453 i, cfg_ctl, p_ctl_mode[ctl_mode], ctl_index[i], 2454 ichan->channel, ath_hal_getctl(ah, chan)); 2455 2456 2457 /* 2458 * compare test group from regulatory channel list 2459 * with test mode from p_ctl_mode list 2460 */ 2461 if ((((cfg_ctl & ~CTL_MODE_M) | 2462 (p_ctl_mode[ctl_mode] & CTL_MODE_M)) == ctl_index[i]) || 2463 (((cfg_ctl & ~CTL_MODE_M) | 2464 (p_ctl_mode[ctl_mode] & CTL_MODE_M)) == 2465 ((ctl_index[i] & CTL_MODE_M) | SD_NO_CTL))) 2466 { 2467 twice_min_edge_power = 2468 ar9300_eep_def_get_max_edge_power( 2469 p_eep_data, freq, i, IEEE80211_IS_CHAN_2GHZ(chan)); 2470 2471 HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, 2472 " MATCH-EE_IDX %d: ch %d is2 %d " 2473 "2xMinEdge %d chainmask %d chains %d\n", 2474 i, freq, IEEE80211_IS_CHAN_2GHZ(chan), 2475 twice_min_edge_power, tx_chainmask, 2476 ar9300_get_ntxchains(tx_chainmask)); 2477 2478 if ((cfg_ctl & ~CTL_MODE_M) == SD_NO_CTL) { 2479 /* 2480 * Find the minimum of all CTL edge powers 2481 * that apply to this channel 2482 */ 2483 twice_max_edge_power = 2484 AH_MIN(twice_max_edge_power, twice_min_edge_power); 2485 } else { 2486 /* specific */ 2487 twice_max_edge_power = twice_min_edge_power; 2488 break; 2489 } 2490 } 2491 } 2492 2493 min_ctl_power = (u_int8_t)AH_MIN(twice_max_edge_power, scaled_power); 2494 2495 HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, 2496 " SEL-Min ctl_mode %d p_ctl_mode %d " 2497 "2xMaxEdge %d sP %d min_ctl_pwr %d\n", 2498 ctl_mode, p_ctl_mode[ctl_mode], 2499 twice_max_edge_power, scaled_power, min_ctl_power); 2500 2501 /* Apply ctl mode to correct target power set */ 2502 switch (p_ctl_mode[ctl_mode]) { 2503 case CTL_11B: 2504 for (i = ALL_TARGET_LEGACY_1L_5L; i <= ALL_TARGET_LEGACY_11S; i++) { 2505 p_pwr_array[i] = 2506 (u_int8_t)AH_MIN(p_pwr_array[i], min_ctl_power); 2507 } 2508 break; 2509 case CTL_11A: 2510 case CTL_11G: 2511 for (i = ALL_TARGET_LEGACY_6_24; i <= ALL_TARGET_LEGACY_54; i++) { 2512 p_pwr_array[i] = 2513 (u_int8_t)AH_MIN(p_pwr_array[i], min_ctl_power); 2514#ifdef ATH_BT_COEX 2515 if ((ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_3WIRE) || 2516 (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) 2517 { 2518 if ((ahp->ah_bt_coex_flag & HAL_BT_COEX_FLAG_LOWER_TX_PWR) 2519 && (ahp->ah_bt_wlan_isolation 2520 < HAL_BT_COEX_ISOLATION_FOR_NO_COEX)) 2521 { 2522 2523 u_int8_t reduce_pow; 2524 2525 reduce_pow = (HAL_BT_COEX_ISOLATION_FOR_NO_COEX 2526 - ahp->ah_bt_wlan_isolation) << 1; 2527 2528 if (reduce_pow <= p_pwr_array[i]) { 2529 p_pwr_array[i] -= reduce_pow; 2530 } 2531 } 2532 if ((ahp->ah_bt_coex_flag & 2533 HAL_BT_COEX_FLAG_LOW_ACK_PWR) && 2534 (i != ALL_TARGET_LEGACY_36) && 2535 (i != ALL_TARGET_LEGACY_48) && 2536 (i != ALL_TARGET_LEGACY_54) && 2537 (p_ctl_mode[ctl_mode] == CTL_11G)) 2538 { 2539 p_pwr_array[i] = 0; 2540 } 2541 } 2542#endif 2543 } 2544 break; 2545 case CTL_5GHT20: 2546 case CTL_2GHT20: 2547 for (i = ALL_TARGET_HT20_0_8_16; i <= ALL_TARGET_HT20_23; i++) { 2548 p_pwr_array[i] = 2549 (u_int8_t)AH_MIN(p_pwr_array[i], min_ctl_power); 2550#ifdef ATH_BT_COEX 2551 if (((ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_3WIRE) || 2552 (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) && 2553 (ahp->ah_bt_coex_flag & HAL_BT_COEX_FLAG_LOWER_TX_PWR) && 2554 (ahp->ah_bt_wlan_isolation 2555 < HAL_BT_COEX_ISOLATION_FOR_NO_COEX)) { 2556 2557 u_int8_t reduce_pow = (HAL_BT_COEX_ISOLATION_FOR_NO_COEX 2558 - ahp->ah_bt_wlan_isolation) << 1; 2559 2560 if (reduce_pow <= p_pwr_array[i]) { 2561 p_pwr_array[i] -= reduce_pow; 2562 } 2563 } 2564#if ATH_SUPPORT_MCI 2565 else if ((ahp->ah_bt_coex_flag & 2566 HAL_BT_COEX_FLAG_MCI_MAX_TX_PWR) && 2567 (p_ctl_mode[ctl_mode] == CTL_2GHT20) && 2568 (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) 2569 { 2570 u_int8_t max_pwr; 2571 2572 max_pwr = MS(mci_concur_tx_max_pwr[2][1], 2573 ATH_MCI_CONCUR_TX_LOWEST_PWR_MASK); 2574 if (p_pwr_array[i] > max_pwr) { 2575 p_pwr_array[i] = max_pwr; 2576 } 2577 } 2578#endif 2579#endif 2580 } 2581 break; 2582 case CTL_11B_EXT: 2583#ifdef NOT_YET 2584 target_power_cck_ext.t_pow2x[0] = (u_int8_t) 2585 AH_MIN(target_power_cck_ext.t_pow2x[0], min_ctl_power); 2586#endif /* NOT_YET */ 2587 break; 2588 case CTL_11A_EXT: 2589 case CTL_11G_EXT: 2590#ifdef NOT_YET 2591 target_power_ofdm_ext.t_pow2x[0] = (u_int8_t) 2592 AH_MIN(target_power_ofdm_ext.t_pow2x[0], min_ctl_power); 2593#endif /* NOT_YET */ 2594 break; 2595 case CTL_5GHT40: 2596 case CTL_2GHT40: 2597 for (i = ALL_TARGET_HT40_0_8_16; i <= ALL_TARGET_HT40_23; i++) { 2598 p_pwr_array[i] = (u_int8_t) 2599 AH_MIN(p_pwr_array[i], min_ctl_power); 2600#ifdef ATH_BT_COEX 2601 if (((ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_3WIRE) || 2602 (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) && 2603 (ahp->ah_bt_coex_flag & HAL_BT_COEX_FLAG_LOWER_TX_PWR) && 2604 (ahp->ah_bt_wlan_isolation 2605 < HAL_BT_COEX_ISOLATION_FOR_NO_COEX)) { 2606 2607 u_int8_t reduce_pow = (HAL_BT_COEX_ISOLATION_FOR_NO_COEX 2608 - ahp->ah_bt_wlan_isolation) << 1; 2609 2610 if (reduce_pow <= p_pwr_array[i]) { 2611 p_pwr_array[i] -= reduce_pow; 2612 } 2613 } 2614#if ATH_SUPPORT_MCI 2615 else if ((ahp->ah_bt_coex_flag & 2616 HAL_BT_COEX_FLAG_MCI_MAX_TX_PWR) && 2617 (p_ctl_mode[ctl_mode] == CTL_2GHT40) && 2618 (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) 2619 { 2620 u_int8_t max_pwr; 2621 2622 max_pwr = MS(mci_concur_tx_max_pwr[3][1], 2623 ATH_MCI_CONCUR_TX_LOWEST_PWR_MASK); 2624 if (p_pwr_array[i] > max_pwr) { 2625 p_pwr_array[i] = max_pwr; 2626 } 2627 } 2628#endif 2629#endif 2630 } 2631 break; 2632 default: 2633 HALASSERT(0); 2634 break; 2635 } 2636 } /* end ctl mode checking */ 2637 2638 return AH_TRUE; 2639#undef EXT_ADDITIVE 2640#undef CTL_11A_EXT 2641#undef CTL_11G_EXT 2642#undef CTL_11B_EXT 2643#undef REDUCE_SCALED_POWER_BY_TWO_CHAIN 2644#undef REDUCE_SCALED_POWER_BY_THREE_CHAIN 2645} 2646 2647/************************************************************** 2648 * ar9300_eeprom_set_transmit_power 2649 * 2650 * Set the transmit power in the baseband for the given 2651 * operating channel and mode. 2652 */ 2653HAL_STATUS 2654ar9300_eeprom_set_transmit_power(struct ath_hal *ah, 2655 ar9300_eeprom_t *p_eep_data, const struct ieee80211_channel *chan, u_int16_t cfg_ctl, 2656 u_int16_t antenna_reduction, u_int16_t twice_max_regulatory_power, 2657 u_int16_t power_limit) 2658{ 2659#define ABS(_x, _y) ((int)_x > (int)_y ? (int)_x - (int)_y : (int)_y - (int)_x) 2660#define INCREASE_MAXPOW_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ 2661#define INCREASE_MAXPOW_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */ 2662 u_int8_t target_power_val_t2[ar9300_rate_size]; 2663 u_int8_t target_power_val_t2_eep[ar9300_rate_size]; 2664 int16_t twice_array_gain = 0, max_power_level = 0; 2665 struct ath_hal_9300 *ahp = AH9300(ah); 2666 int i = 0; 2667 u_int32_t tmp_paprd_rate_mask = 0, *tmp_ptr = NULL; 2668 int paprd_scale_factor = 5; 2669 HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan); 2670 2671 u_int8_t *ptr_mcs_rate2power_table_index; 2672 u_int8_t mcs_rate2power_table_index_ht20[24] = 2673 { 2674 ALL_TARGET_HT20_0_8_16, 2675 ALL_TARGET_HT20_1_3_9_11_17_19, 2676 ALL_TARGET_HT20_1_3_9_11_17_19, 2677 ALL_TARGET_HT20_1_3_9_11_17_19, 2678 ALL_TARGET_HT20_4, 2679 ALL_TARGET_HT20_5, 2680 ALL_TARGET_HT20_6, 2681 ALL_TARGET_HT20_7, 2682 ALL_TARGET_HT20_0_8_16, 2683 ALL_TARGET_HT20_1_3_9_11_17_19, 2684 ALL_TARGET_HT20_1_3_9_11_17_19, 2685 ALL_TARGET_HT20_1_3_9_11_17_19, 2686 ALL_TARGET_HT20_12, 2687 ALL_TARGET_HT20_13, 2688 ALL_TARGET_HT20_14, 2689 ALL_TARGET_HT20_15, 2690 ALL_TARGET_HT20_0_8_16, 2691 ALL_TARGET_HT20_1_3_9_11_17_19, 2692 ALL_TARGET_HT20_1_3_9_11_17_19, 2693 ALL_TARGET_HT20_1_3_9_11_17_19, 2694 ALL_TARGET_HT20_20, 2695 ALL_TARGET_HT20_21, 2696 ALL_TARGET_HT20_22, 2697 ALL_TARGET_HT20_23 2698 }; 2699 2700 u_int8_t mcs_rate2power_table_index_ht40[24] = 2701 { 2702 ALL_TARGET_HT40_0_8_16, 2703 ALL_TARGET_HT40_1_3_9_11_17_19, 2704 ALL_TARGET_HT40_1_3_9_11_17_19, 2705 ALL_TARGET_HT40_1_3_9_11_17_19, 2706 ALL_TARGET_HT40_4, 2707 ALL_TARGET_HT40_5, 2708 ALL_TARGET_HT40_6, 2709 ALL_TARGET_HT40_7, 2710 ALL_TARGET_HT40_0_8_16, 2711 ALL_TARGET_HT40_1_3_9_11_17_19, 2712 ALL_TARGET_HT40_1_3_9_11_17_19, 2713 ALL_TARGET_HT40_1_3_9_11_17_19, 2714 ALL_TARGET_HT40_12, 2715 ALL_TARGET_HT40_13, 2716 ALL_TARGET_HT40_14, 2717 ALL_TARGET_HT40_15, 2718 ALL_TARGET_HT40_0_8_16, 2719 ALL_TARGET_HT40_1_3_9_11_17_19, 2720 ALL_TARGET_HT40_1_3_9_11_17_19, 2721 ALL_TARGET_HT40_1_3_9_11_17_19, 2722 ALL_TARGET_HT40_20, 2723 ALL_TARGET_HT40_21, 2724 ALL_TARGET_HT40_22, 2725 ALL_TARGET_HT40_23, 2726 }; 2727 2728 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, 2729 "%s[%d] +++chan %d,cfgctl 0x%04x " 2730 "antenna_reduction 0x%04x, twice_max_regulatory_power 0x%04x " 2731 "power_limit 0x%04x\n", 2732 __func__, __LINE__, ichan->channel, cfg_ctl, 2733 antenna_reduction, twice_max_regulatory_power, power_limit); 2734 ar9300_set_target_power_from_eeprom(ah, ichan->channel, target_power_val_t2); 2735 2736 if (ar9300_eeprom_get(ahp, EEP_PAPRD_ENABLED)) { 2737 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 2738 if (IEEE80211_IS_CHAN_HT40(chan)) { 2739 tmp_paprd_rate_mask = 2740 p_eep_data->modal_header_2g.paprd_rate_mask_ht40; 2741 tmp_ptr = &AH9300(ah)->ah_2g_paprd_rate_mask_ht40; 2742 } else { 2743 tmp_paprd_rate_mask = 2744 p_eep_data->modal_header_2g.paprd_rate_mask_ht20; 2745 tmp_ptr = &AH9300(ah)->ah_2g_paprd_rate_mask_ht20; 2746 } 2747 } else { 2748 if (IEEE80211_IS_CHAN_HT40(chan)) { 2749 tmp_paprd_rate_mask = 2750 p_eep_data->modal_header_5g.paprd_rate_mask_ht40; 2751 tmp_ptr = &AH9300(ah)->ah_5g_paprd_rate_mask_ht40; 2752 } else { 2753 tmp_paprd_rate_mask = 2754 p_eep_data->modal_header_5g.paprd_rate_mask_ht20; 2755 tmp_ptr = &AH9300(ah)->ah_5g_paprd_rate_mask_ht20; 2756 } 2757 } 2758 AH_PAPRD_GET_SCALE_FACTOR( 2759 paprd_scale_factor, p_eep_data, IEEE80211_IS_CHAN_2GHZ(chan), ichan->channel); 2760 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, "%s[%d] paprd_scale_factor %d\n", 2761 __func__, __LINE__, paprd_scale_factor); 2762 /* PAPRD is not done yet, Scale down the EEP power */ 2763 if (IEEE80211_IS_CHAN_HT40(chan)) { 2764 ptr_mcs_rate2power_table_index = 2765 &mcs_rate2power_table_index_ht40[0]; 2766 } else { 2767 ptr_mcs_rate2power_table_index = 2768 &mcs_rate2power_table_index_ht20[0]; 2769 } 2770 if (! ichan->paprd_table_write_done) { 2771 for (i = 0; i < 24; i++) { 2772 /* PAPRD is done yet, so Scale down Power for PAPRD Rates*/ 2773 if (tmp_paprd_rate_mask & (1 << i)) { 2774 target_power_val_t2[ptr_mcs_rate2power_table_index[i]] -= 2775 paprd_scale_factor; 2776 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, 2777 "%s[%d]: Chan %d " 2778 "Scale down target_power_val_t2[%d] = 0x%04x\n", 2779 __func__, __LINE__, 2780 ichan->channel, i, target_power_val_t2[i]); 2781 } 2782 } 2783 } else { 2784 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, 2785 "%s[%d]: PAPRD Done No TGT PWR Scaling\n", __func__, __LINE__); 2786 } 2787 } 2788 2789 /* Save the Target power for future use */ 2790 OS_MEMCPY(target_power_val_t2_eep, target_power_val_t2, 2791 sizeof(target_power_val_t2)); 2792 ar9300_eeprom_set_power_per_rate_table(ah, p_eep_data, chan, 2793 target_power_val_t2, cfg_ctl, 2794 antenna_reduction, 2795 twice_max_regulatory_power, 2796 power_limit, 0); 2797 2798 /* Save this for quick lookup */ 2799 ahp->reg_dmn = ath_hal_getctl(ah, chan); 2800 2801 /* 2802 * Always use CDD/direct per rate power table for register based approach. 2803 * For FCC, CDD calculations should factor in the array gain, hence 2804 * this adjust call. ETSI and MKK does not have this requirement. 2805 */ 2806 if (is_reg_dmn_fcc(ahp->reg_dmn)) { 2807 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, 2808 "%s: FCC regdomain, calling reg_txpower_cdd\n", 2809 __func__); 2810 ar9300_adjust_reg_txpower_cdd(ah, target_power_val_t2); 2811 } 2812 2813 if (ar9300_eeprom_get(ahp, EEP_PAPRD_ENABLED)) { 2814 for (i = 0; i < ar9300_rate_size; i++) { 2815 /* 2816 * EEPROM TGT PWR is not same as current TGT PWR, 2817 * so Disable PAPRD for this rate. 2818 * Some of APs might ask to reduce Target Power, 2819 * if target power drops significantly, 2820 * disable PAPRD for that rate. 2821 */ 2822 if (tmp_paprd_rate_mask & (1 << i)) { 2823 if (ABS(target_power_val_t2_eep[i], target_power_val_t2[i]) > 2824 paprd_scale_factor) 2825 { 2826 tmp_paprd_rate_mask &= ~(1 << i); 2827 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, 2828 "%s: EEP TPC[%02d] 0x%08x " 2829 "Curr TPC[%02d] 0x%08x mask = 0x%08x\n", 2830 __func__, i, target_power_val_t2_eep[i], i, 2831 target_power_val_t2[i], tmp_paprd_rate_mask); 2832 } 2833 } 2834 2835 } 2836 HALDEBUG(ah, HAL_DEBUG_CALIBRATE, 2837 "%s: Chan %d After tmp_paprd_rate_mask = 0x%08x\n", 2838 __func__, ichan->channel, tmp_paprd_rate_mask); 2839 if (tmp_ptr) { 2840 *tmp_ptr = tmp_paprd_rate_mask; 2841 } 2842 } 2843 2844 /* Write target power array to registers */ 2845 ar9300_transmit_power_reg_write(ah, target_power_val_t2); 2846 2847 /* Write target power for self generated frames to the TPC register */ 2848 ar9300_selfgen_tpc_reg_write(ah, chan, target_power_val_t2); 2849 2850 /* GreenTx or Paprd */ 2851 if (ah->ah_config.ath_hal_sta_update_tx_pwr_enable || 2852 AH_PRIVATE(ah)->ah_caps.halPaprdEnabled) 2853 { 2854 if (AR_SREV_POSEIDON(ah)) { 2855 /*For HAL_RSSI_TX_POWER_NONE array*/ 2856 OS_MEMCPY(ahp->ah_default_tx_power, 2857 target_power_val_t2, 2858 sizeof(target_power_val_t2)); 2859 /* Get defautl tx related register setting for GreenTx */ 2860 /* Record OB/DB */ 2861 ahp->ah_ob_db1[POSEIDON_STORED_REG_OBDB] = 2862 OS_REG_READ(ah, AR_PHY_65NM_CH0_TXRF2); 2863 /* Record TPC settting */ 2864 ahp->ah_ob_db1[POSEIDON_STORED_REG_TPC] = 2865 OS_REG_READ(ah, AR_TPC); 2866 /* Record BB_powertx_rate9 setting */ 2867 ahp->ah_ob_db1[POSEIDON_STORED_REG_BB_PWRTX_RATE9] = 2868 OS_REG_READ(ah, AR_PHY_BB_POWERTX_RATE9); 2869 } 2870 } 2871 2872 /* 2873 * Return tx power used to iwconfig. 2874 * Since power is rate dependent, use one of the indices from the 2875 * AR9300_Rates enum to select an entry from target_power_val_t2[] 2876 * to report. 2877 * Currently returns the power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps 2878 * as CCK power is less interesting (?). 2879 */ 2880 i = ALL_TARGET_LEGACY_6_24; /* legacy */ 2881 if (IEEE80211_IS_CHAN_HT40(chan)) { 2882 i = ALL_TARGET_HT40_0_8_16; /* ht40 */ 2883 } else if (IEEE80211_IS_CHAN_HT20(chan)) { 2884 i = ALL_TARGET_HT20_0_8_16; /* ht20 */ 2885 } 2886 max_power_level = target_power_val_t2[i]; 2887 /* Adjusting the ah_max_power_level based on chains and antennaGain*/ 2888 switch (ar9300_get_ntxchains(ahp->ah_tx_chainmask)) 2889 { 2890 case 1: 2891 break; 2892 case 2: 2893 twice_array_gain = (ahp->twice_antenna_gain >= ahp->twice_antenna_reduction)? 0: 2894 ((int16_t)AH_MIN((ahp->twice_antenna_reduction - 2895 (ahp->twice_antenna_gain + INCREASE_MAXPOW_BY_TWO_CHAIN)), 0)); 2896 /* Adjusting maxpower with antennaGain */ 2897 max_power_level -= twice_array_gain; 2898 /* Adjusting maxpower based on chain */ 2899 max_power_level += INCREASE_MAXPOW_BY_TWO_CHAIN; 2900 break; 2901 case 3: 2902 twice_array_gain = (ahp->twice_antenna_gain >= ahp->twice_antenna_reduction)? 0: 2903 ((int16_t)AH_MIN((ahp->twice_antenna_reduction - 2904 (ahp->twice_antenna_gain + INCREASE_MAXPOW_BY_THREE_CHAIN)), 0)); 2905 2906 /* Adjusting maxpower with antennaGain */ 2907 max_power_level -= twice_array_gain; 2908 /* Adjusting maxpower based on chain */ 2909 max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN; 2910 break; 2911 default: 2912 HALASSERT(0); /* Unsupported number of chains */ 2913 } 2914 AH_PRIVATE(ah)->ah_maxPowerLevel = (int8_t)max_power_level; 2915 2916 ar9300_calibration_apply(ah, ichan->channel); 2917#undef ABS 2918 2919 /* Handle per packet TPC initializations */ 2920 if (ah->ah_config.ath_hal_desc_tpc) { 2921 /* Transmit Power per-rate per-chain are computed here. A separate 2922 * power table is maintained for different MIMO modes (i.e. TXBF ON, 2923 * STBC) to enable easy lookup during packet transmit. 2924 * The reason for maintaing each of these tables per chain is that 2925 * the transmit power used for different number of chains is different 2926 * depending on whether the power has been limited by the target power, 2927 * the regulatory domain or the CTL limits. 2928 */ 2929 u_int mode = ath_hal_get_curmode(ah, chan); 2930 u_int32_t val = 0; 2931 u_int8_t chainmasks[AR9300_MAX_CHAINS] = 2932 {OSPREY_1_CHAINMASK, OSPREY_2LOHI_CHAINMASK, OSPREY_3_CHAINMASK}; 2933 for (i = 0; i < AR9300_MAX_CHAINS; i++) { 2934 OS_MEMCPY(target_power_val_t2, target_power_val_t2_eep, 2935 sizeof(target_power_val_t2_eep)); 2936 ar9300_eeprom_set_power_per_rate_table(ah, p_eep_data, chan, 2937 target_power_val_t2, cfg_ctl, 2938 antenna_reduction, 2939 twice_max_regulatory_power, 2940 power_limit, chainmasks[i]); 2941 HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, 2942 " Channel = %d Chainmask = %d, Upper Limit = [%2d.%1d dBm]\n", 2943 ichan->channel, i, ahp->upper_limit[i]/2, 2944 ahp->upper_limit[i]%2 * 5); 2945 ar9300_init_rate_txpower(ah, mode, chan, target_power_val_t2, 2946 chainmasks[i]); 2947 2948 } 2949 2950 /* Enable TPC */ 2951 OS_REG_WRITE(ah, AR_PHY_PWRTX_MAX, AR_PHY_PWRTX_MAX_TPC_ENABLE); 2952 /* 2953 * Disable per chain power reduction since we are already 2954 * accounting for this in our calculations 2955 */ 2956 val = OS_REG_READ(ah, AR_PHY_POWER_TX_SUB); 2957 if (AR_SREV_WASP(ah)) { 2958 OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB, 2959 val & AR_PHY_POWER_TX_SUB_2_DISABLE); 2960 } else { 2961 OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB, 2962 val & AR_PHY_POWER_TX_SUB_3_DISABLE); 2963 } 2964 } 2965 2966 return HAL_OK; 2967} 2968 2969/************************************************************** 2970 * ar9300_eeprom_set_addac 2971 * 2972 * Set the ADDAC from eeprom. 2973 */ 2974void 2975ar9300_eeprom_set_addac(struct ath_hal *ah, struct ieee80211_channel *chan) 2976{ 2977 2978 HALDEBUG(AH_NULL, HAL_DEBUG_UNMASKABLE, 2979 "FIXME: ar9300_eeprom_def_set_addac called\n"); 2980#if 0 2981 MODAL_EEPDEF_HEADER *p_modal; 2982 struct ath_hal_9300 *ahp = AH9300(ah); 2983 ar9300_eeprom_t *eep = &ahp->ah_eeprom.def; 2984 u_int8_t biaslevel; 2985 2986 if (AH_PRIVATE(ah)->ah_macVersion != AR_SREV_VERSION_SOWL) { 2987 return; 2988 } 2989 2990 HALASSERT(owl_get_eepdef_ver(ahp) == AR9300_EEP_VER); 2991 2992 /* Xpa bias levels in eeprom are valid from rev 14.7 */ 2993 if (owl_get_eepdef_rev(ahp) < AR9300_EEP_MINOR_VER_7) { 2994 return; 2995 } 2996 2997 if (ahp->ah_emu_eeprom) { 2998 return; 2999 } 3000 3001 p_modal = &(eep->modal_header[IEEE80211_IS_CHAN_2GHZ(chan)]); 3002 3003 if (p_modal->xpa_bias_lvl != 0xff) { 3004 biaslevel = p_modal->xpa_bias_lvl; 3005 } else { 3006 /* Use freqeuncy specific xpa bias level */ 3007 u_int16_t reset_freq_bin, freq_bin, freq_count = 0; 3008 CHAN_CENTERS centers; 3009 3010 ar9300_get_channel_centers(ah, chan, ¢ers); 3011 3012 reset_freq_bin = FREQ2FBIN(centers.synth_center, IEEE80211_IS_CHAN_2GHZ(chan)); 3013 freq_bin = p_modal->xpa_bias_lvl_freq[0] & 0xff; 3014 biaslevel = (u_int8_t)(p_modal->xpa_bias_lvl_freq[0] >> 14); 3015 3016 freq_count++; 3017 3018 while (freq_count < 3) { 3019 if (p_modal->xpa_bias_lvl_freq[freq_count] == 0x0) { 3020 break; 3021 } 3022 3023 freq_bin = p_modal->xpa_bias_lvl_freq[freq_count] & 0xff; 3024 if (reset_freq_bin >= freq_bin) { 3025 biaslevel = 3026 (u_int8_t)(p_modal->xpa_bias_lvl_freq[freq_count] >> 14); 3027 } else { 3028 break; 3029 } 3030 freq_count++; 3031 } 3032 } 3033 3034 /* Apply bias level to the ADDAC values in the INI array */ 3035 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 3036 INI_RA(&ahp->ah_ini_addac, 7, 1) = 3037 (INI_RA(&ahp->ah_ini_addac, 7, 1) & (~0x18)) | biaslevel << 3; 3038 } else { 3039 INI_RA(&ahp->ah_ini_addac, 6, 1) = 3040 (INI_RA(&ahp->ah_ini_addac, 6, 1) & (~0xc0)) | biaslevel << 6; 3041 } 3042#endif 3043} 3044 3045u_int 3046ar9300_eeprom_dump_support(struct ath_hal *ah, void **pp_e) 3047{ 3048 *pp_e = &(AH9300(ah)->ah_eeprom); 3049 return sizeof(ar9300_eeprom_t); 3050} 3051 3052u_int8_t 3053ar9300_eeprom_get_num_ant_config(struct ath_hal_9300 *ahp, 3054 HAL_FREQ_BAND freq_band) 3055{ 3056#if 0 3057 ar9300_eeprom_t *eep = &ahp->ah_eeprom.def; 3058 MODAL_EEPDEF_HEADER *p_modal = 3059 &(eep->modal_header[HAL_FREQ_BAND_2GHZ == freq_band]); 3060 BASE_EEPDEF_HEADER *p_base = &eep->base_eep_header; 3061 u_int8_t num_ant_config; 3062 3063 num_ant_config = 1; /* default antenna configuration */ 3064 3065 if (p_base->version >= 0x0E0D) { 3066 if (p_modal->use_ant1) { 3067 num_ant_config += 1; 3068 } 3069 } 3070 3071 return num_ant_config; 3072#else 3073 return 1; 3074#endif 3075} 3076 3077HAL_STATUS 3078ar9300_eeprom_get_ant_cfg(struct ath_hal_9300 *ahp, 3079 const struct ieee80211_channel *chan, 3080 u_int8_t index, u_int16_t *config) 3081{ 3082#if 0 3083 ar9300_eeprom_t *eep = &ahp->ah_eeprom.def; 3084 MODAL_EEPDEF_HEADER *p_modal = &(eep->modal_header[IEEE80211_IS_CHAN_2GHZ(chan)]); 3085 BASE_EEPDEF_HEADER *p_base = &eep->base_eep_header; 3086 3087 switch (index) { 3088 case 0: 3089 *config = p_modal->ant_ctrl_common & 0xFFFF; 3090 return HAL_OK; 3091 case 1: 3092 if (p_base->version >= 0x0E0D) { 3093 if (p_modal->use_ant1) { 3094 *config = ((p_modal->ant_ctrl_common & 0xFFFF0000) >> 16); 3095 return HAL_OK; 3096 } 3097 } 3098 break; 3099 default: 3100 break; 3101 } 3102#endif 3103 return HAL_EINVAL; 3104} 3105 3106u_int8_t* 3107ar9300_eeprom_get_cust_data(struct ath_hal_9300 *ahp) 3108{ 3109 return (u_int8_t *)ahp; 3110} 3111 3112#ifdef UNUSED 3113static inline HAL_STATUS 3114ar9300_check_eeprom(struct ath_hal *ah) 3115{ 3116#if 0 3117 u_int32_t sum = 0, el; 3118 u_int16_t *eepdata; 3119 int i; 3120 struct ath_hal_9300 *ahp = AH9300(ah); 3121 HAL_BOOL need_swap = AH_FALSE; 3122 ar9300_eeprom_t *eep = (ar9300_eeprom_t *)&ahp->ah_eeprom.def; 3123 u_int16_t magic, magic2; 3124 int addr; 3125 u_int16_t temp; 3126 3127 /* 3128 ** We need to check the EEPROM data regardless of if it's in flash or 3129 ** in EEPROM. 3130 */ 3131 3132 if (!ahp->ah_priv.priv.ah_eeprom_read( 3133 ah, AR9300_EEPROM_MAGIC_OFFSET, &magic)) 3134 { 3135 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: Reading Magic # failed\n", __func__); 3136 return AH_FALSE; 3137 } 3138 3139 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: Read Magic = 0x%04X\n", __func__, magic); 3140 3141 if (!ar9300_eep_data_in_flash(ah)) { 3142 3143 if (magic != AR9300_EEPROM_MAGIC) { 3144 magic2 = SWAP16(magic); 3145 3146 if (magic2 == AR9300_EEPROM_MAGIC) { 3147 need_swap = AH_TRUE; 3148 eepdata = (u_int16_t *)(&ahp->ah_eeprom); 3149 3150 for (addr = 0; 3151 addr < sizeof(ar9300_eeprom_t) / sizeof(u_int16_t); 3152 addr++) 3153 { 3154 temp = SWAP16(*eepdata); 3155 *eepdata = temp; 3156 eepdata++; 3157 3158 HALDEBUG(ah, HAL_DEBUG_EEPROM_DUMP, "0x%04X ", *eepdata); 3159 if (((addr + 1) % 6) == 0) { 3160 HALDEBUG(ah, HAL_DEBUG_EEPROM_DUMP, "\n"); 3161 } 3162 } 3163 } else { 3164 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3165 "Invalid EEPROM Magic. endianness missmatch.\n"); 3166 return HAL_EEBADSUM; 3167 } 3168 } 3169 } else { 3170 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3171 "EEPROM being read from flash @0x%p\n", AH_PRIVATE(ah)->ah_st); 3172 } 3173 3174 HALDEBUG(ah, HAL_DEBUG_EEPROM, "need_swap = %s.\n", need_swap?"True":"False"); 3175 3176 if (need_swap) { 3177 el = SWAP16(ahp->ah_eeprom.def.base_eep_header.length); 3178 } else { 3179 el = ahp->ah_eeprom.def.base_eep_header.length; 3180 } 3181 3182 eepdata = (u_int16_t *)(&ahp->ah_eeprom.def); 3183 for (i = 0; 3184 i < AH_MIN(el, sizeof(ar9300_eeprom_t)) / sizeof(u_int16_t); 3185 i++) { 3186 sum ^= *eepdata++; 3187 } 3188 3189 if (need_swap) { 3190 /* 3191 * preddy: EEPROM endianness does not match. So change it 3192 * 8bit values in eeprom data structure does not need to be swapped 3193 * Only >8bits (16 & 32) values need to be swapped 3194 * If a new 16 or 32 bit field is added to the EEPROM contents, 3195 * please make sure to swap the field here 3196 */ 3197 u_int32_t integer, j; 3198 u_int16_t word; 3199 3200 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3201 "EEPROM Endianness is not native.. Changing \n"); 3202 3203 /* convert Base Eep header */ 3204 word = SWAP16(eep->base_eep_header.length); 3205 eep->base_eep_header.length = word; 3206 3207 word = SWAP16(eep->base_eep_header.checksum); 3208 eep->base_eep_header.checksum = word; 3209 3210 word = SWAP16(eep->base_eep_header.version); 3211 eep->base_eep_header.version = word; 3212 3213 word = SWAP16(eep->base_eep_header.reg_dmn[0]); 3214 eep->base_eep_header.reg_dmn[0] = word; 3215 3216 word = SWAP16(eep->base_eep_header.reg_dmn[1]); 3217 eep->base_eep_header.reg_dmn[1] = word; 3218 3219 word = SWAP16(eep->base_eep_header.rf_silent); 3220 eep->base_eep_header.rf_silent = word; 3221 3222 word = SWAP16(eep->base_eep_header.blue_tooth_options); 3223 eep->base_eep_header.blue_tooth_options = word; 3224 3225 word = SWAP16(eep->base_eep_header.device_cap); 3226 eep->base_eep_header.device_cap = word; 3227 3228 /* convert Modal Eep header */ 3229 for (j = 0; j < ARRAY_LENGTH(eep->modal_header); j++) { 3230 MODAL_EEPDEF_HEADER *p_modal = &eep->modal_header[j]; 3231 integer = SWAP32(p_modal->ant_ctrl_common); 3232 p_modal->ant_ctrl_common = integer; 3233 3234 for (i = 0; i < AR9300_MAX_CHAINS; i++) { 3235 integer = SWAP32(p_modal->ant_ctrl_chain[i]); 3236 p_modal->ant_ctrl_chain[i] = integer; 3237 } 3238 3239 for (i = 0; i < AR9300_EEPROM_MODAL_SPURS; i++) { 3240 word = SWAP16(p_modal->spur_chans[i].spur_chan); 3241 p_modal->spur_chans[i].spur_chan = word; 3242 } 3243 } 3244 } 3245 3246 /* Check CRC - Attach should fail on a bad checksum */ 3247 if (sum != 0xffff || owl_get_eepdef_ver(ahp) != AR9300_EEP_VER || 3248 owl_get_eepdef_rev(ahp) < AR9300_EEP_NO_BACK_VER) { 3249 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3250 "Bad EEPROM checksum 0x%x or revision 0x%04x\n", 3251 sum, owl_get_eepdef_ver(ahp)); 3252 return HAL_EEBADSUM; 3253 } 3254#ifdef EEPROM_DUMP 3255 ar9300_eeprom_def_dump(ah, eep); 3256#endif 3257 3258#if 0 3259#ifdef AH_AR9300_OVRD_TGT_PWR 3260 3261 /* 3262 * 14.4 EEPROM contains low target powers. 3263 * Hardcode until EEPROM > 14.4 3264 */ 3265 if (owl_get_eepdef_ver(ahp) == 14 && owl_get_eepdef_rev(ahp) <= 4) { 3266 MODAL_EEPDEF_HEADER *p_modal; 3267 3268#ifdef EEPROM_DUMP 3269 HALDEBUG(ah, HAL_DEBUG_POWER_OVERRIDE, "Original Target Powers\n"); 3270 ar9300_eep_def_dump_tgt_power(ah, eep); 3271#endif 3272 HALDEBUG(ah, HAL_DEBUG_POWER_OVERRIDE, 3273 "Override Target Powers. EEPROM Version is %d.%d, " 3274 "Device Type %d\n", 3275 owl_get_eepdef_ver(ahp), 3276 owl_get_eepdef_rev(ahp), 3277 eep->base_eep_header.device_type); 3278 3279 3280 ar9300_eep_def_override_tgt_power(ah, eep); 3281 3282 if (eep->base_eep_header.device_type == 5) { 3283 /* for xb72 only: improve transmit EVM for interop */ 3284 p_modal = &eep->modal_header[1]; 3285 p_modal->tx_frame_to_data_start = 0x23; 3286 p_modal->tx_frame_to_xpa_on = 0x23; 3287 p_modal->tx_frame_to_pa_on = 0x23; 3288 } 3289 3290#ifdef EEPROM_DUMP 3291 HALDEBUG(ah, HAL_DEBUG_POWER_OVERRIDE, "Modified Target Powers\n"); 3292 ar9300_eep_def_dump_tgt_power(ah, eep); 3293#endif 3294 } 3295#endif /* AH_AR9300_OVRD_TGT_PWR */ 3296#endif 3297#endif 3298 return HAL_OK; 3299} 3300#endif 3301 3302static u_int16_t 3303ar9300_eeprom_get_spur_chan(struct ath_hal *ah, int i, HAL_BOOL is_2ghz) 3304{ 3305 u_int16_t spur_val = AR_NO_SPUR; 3306#if 0 3307 struct ath_hal_9300 *ahp = AH9300(ah); 3308 ar9300_eeprom_t *eep = (ar9300_eeprom_t *)&ahp->ah_eeprom; 3309 3310 HALASSERT(i < AR_EEPROM_MODAL_SPURS ); 3311 3312 HALDEBUG(ah, HAL_DEBUG_ANI, 3313 "Getting spur idx %d is2Ghz. %d val %x\n", 3314 i, is_2ghz, 3315 AH_PRIVATE(ah)->ah_config.ath_hal_spur_chans[i][is_2ghz]); 3316 3317 switch (AH_PRIVATE(ah)->ah_config.ath_hal_spur_mode) { 3318 case SPUR_DISABLE: 3319 /* returns AR_NO_SPUR */ 3320 break; 3321 case SPUR_ENABLE_IOCTL: 3322 spur_val = AH_PRIVATE(ah)->ah_config.ath_hal_spur_chans[i][is_2ghz]; 3323 HALDEBUG(ah, HAL_DEBUG_ANI, 3324 "Getting spur val from new loc. %d\n", spur_val); 3325 break; 3326 case SPUR_ENABLE_EEPROM: 3327 spur_val = eep->modal_header[is_2ghz].spur_chans[i].spur_chan; 3328 break; 3329 3330 } 3331#endif 3332 return spur_val; 3333} 3334 3335#ifdef UNUSED 3336static inline HAL_BOOL 3337ar9300_fill_eeprom(struct ath_hal *ah) 3338{ 3339 return ar9300_eeprom_restore(ah); 3340} 3341#endif 3342 3343u_int16_t 3344ar9300_eeprom_struct_size(void) 3345{ 3346 return sizeof(ar9300_eeprom_t); 3347} 3348 3349int ar9300_eeprom_struct_default_many(void) 3350{ 3351 return ARRAY_LENGTH(default9300); 3352} 3353 3354 3355ar9300_eeprom_t * 3356ar9300_eeprom_struct_default(int default_index) 3357{ 3358 if (default_index >= 0 && 3359 default_index < ARRAY_LENGTH(default9300)) 3360 { 3361 return default9300[default_index]; 3362 } else { 3363 return 0; 3364 } 3365} 3366 3367ar9300_eeprom_t * 3368ar9300_eeprom_struct_default_find_by_id(int id) 3369{ 3370 int it; 3371 3372 for (it = 0; it < ARRAY_LENGTH(default9300); it++) { 3373 if (default9300[it] != 0 && default9300[it]->template_version == id) { 3374 return default9300[it]; 3375 } 3376 } 3377 return 0; 3378} 3379 3380 3381HAL_BOOL 3382ar9300_calibration_data_read_flash(struct ath_hal *ah, long address, 3383 u_int8_t *buffer, int many) 3384{ 3385 3386 if (((address) < 0) || ((address + many) > AR9300_EEPROM_SIZE - 1)) { 3387 return AH_FALSE; 3388 } 3389 return AH_FALSE; 3390} 3391 3392HAL_BOOL 3393ar9300_calibration_data_read_eeprom(struct ath_hal *ah, long address, 3394 u_int8_t *buffer, int many) 3395{ 3396 int i; 3397 u_int8_t value[2]; 3398 unsigned long eep_addr; 3399 unsigned long byte_addr; 3400 u_int16_t *svalue; 3401 3402 if (((address) < 0) || ((address + many) > AR9300_EEPROM_SIZE)) { 3403 return AH_FALSE; 3404 } 3405 3406 for (i = 0; i < many; i++) { 3407 eep_addr = (u_int16_t) (address + i) / 2; 3408 byte_addr = (u_int16_t) (address + i) % 2; 3409 svalue = (u_int16_t *) value; 3410 if (! ath_hal_eepromRead(ah, eep_addr, svalue)) { 3411 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3412 "%s: Unable to read eeprom region \n", __func__); 3413 return AH_FALSE; 3414 } 3415 buffer[i] = (*svalue >> (8 * byte_addr)) & 0xff; 3416 } 3417 return AH_TRUE; 3418} 3419 3420HAL_BOOL 3421ar9300_calibration_data_read_otp(struct ath_hal *ah, long address, 3422 u_int8_t *buffer, int many, HAL_BOOL is_wifi) 3423{ 3424 int i; 3425 unsigned long eep_addr; 3426 unsigned long byte_addr; 3427 u_int32_t svalue; 3428 3429 if (((address) < 0) || ((address + many) > 0x400)) { 3430 return AH_FALSE; 3431 } 3432 3433 for (i = 0; i < many; i++) { 3434 eep_addr = (u_int16_t) (address + i) / 4; /* otp is 4 bytes long???? */ 3435 byte_addr = (u_int16_t) (address + i) % 4; 3436 if (!ar9300_otp_read(ah, eep_addr, &svalue, is_wifi)) { 3437 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3438 "%s: Unable to read otp region \n", __func__); 3439 return AH_FALSE; 3440 } 3441 buffer[i] = (svalue >> (8 * byte_addr)) & 0xff; 3442 } 3443 return AH_TRUE; 3444} 3445 3446#ifdef ATH_CAL_NAND_FLASH 3447HAL_BOOL 3448ar9300_calibration_data_read_nand(struct ath_hal *ah, long address, 3449 u_int8_t *buffer, int many) 3450{ 3451 int ret_len; 3452 int ret_val = 1; 3453 3454 /* Calling OS based API to read NAND */ 3455 ret_val = OS_NAND_FLASH_READ(ATH_CAL_NAND_PARTITION, address, many, &ret_len, buffer); 3456 3457 return (ret_val ? AH_FALSE: AH_TRUE); 3458} 3459#endif 3460 3461HAL_BOOL 3462ar9300_calibration_data_read(struct ath_hal *ah, long address, 3463 u_int8_t *buffer, int many) 3464{ 3465 switch (AH9300(ah)->calibration_data_source) { 3466 case calibration_data_flash: 3467 return ar9300_calibration_data_read_flash(ah, address, buffer, many); 3468 case calibration_data_eeprom: 3469 return ar9300_calibration_data_read_eeprom(ah, address, buffer, many); 3470 case calibration_data_otp: 3471 return ar9300_calibration_data_read_otp(ah, address, buffer, many, 1); 3472#ifdef ATH_CAL_NAND_FLASH 3473 case calibration_data_nand: 3474 return ar9300_calibration_data_read_nand(ah,address,buffer,many); 3475#endif 3476 3477 } 3478 return AH_FALSE; 3479} 3480 3481 3482HAL_BOOL 3483ar9300_calibration_data_read_array(struct ath_hal *ah, int address, 3484 u_int8_t *buffer, int many) 3485{ 3486 int it; 3487 3488 for (it = 0; it < many; it++) { 3489 (void)ar9300_calibration_data_read(ah, address - it, buffer + it, 1); 3490 } 3491 return AH_TRUE; 3492} 3493 3494 3495/* 3496 * the address where the first configuration block is written 3497 */ 3498static const int base_address = 0x3ff; /* 1KB */ 3499static const int base_address_512 = 0x1ff; /* 512Bytes */ 3500 3501/* 3502 * the address where the NAND first configuration block is written 3503 */ 3504#ifdef ATH_CAL_NAND_FLASH 3505static const int base_address_nand = AR9300_FLASH_CAL_START_OFFSET; 3506#endif 3507 3508 3509/* 3510 * the lower limit on configuration data 3511 */ 3512static const int low_limit = 0x040; 3513 3514/* 3515 * returns size of the physical eeprom in bytes. 3516 * 1024 and 2048 are normal sizes. 3517 * 0 means there is no eeprom. 3518 */ 3519int32_t 3520ar9300_eeprom_size(struct ath_hal *ah) 3521{ 3522 u_int16_t data; 3523 /* 3524 * first we'll try for 4096 bytes eeprom 3525 */ 3526 if (ar9300_eeprom_read_word(ah, 2047, &data)) { 3527 if (data != 0) { 3528 return 4096; 3529 } 3530 } 3531 /* 3532 * then we'll try for 2048 bytes eeprom 3533 */ 3534 if (ar9300_eeprom_read_word(ah, 1023, &data)) { 3535 if (data != 0) { 3536 return 2048; 3537 } 3538 } 3539 /* 3540 * then we'll try for 1024 bytes eeprom 3541 */ 3542 if (ar9300_eeprom_read_word(ah, 511, &data)) { 3543 if (data != 0) { 3544 return 1024; 3545 } 3546 } 3547 return 0; 3548} 3549 3550/* 3551 * returns size of the physical otp in bytes. 3552 * 1024 and 2048 are normal sizes. 3553 * 0 means there is no eeprom. 3554 */ 3555int32_t 3556ar9300_otp_size(struct ath_hal *ah) 3557{ 3558 if (AR_SREV_POSEIDON(ah) || AR_SREV_HORNET(ah)) { 3559 return base_address_512+1; 3560 } else { 3561 return base_address+1; 3562 } 3563} 3564 3565 3566/* 3567 * find top of memory 3568 */ 3569int 3570ar9300_eeprom_base_address(struct ath_hal *ah) 3571{ 3572 int size; 3573 3574 if (AH9300(ah)->calibration_data_source == calibration_data_otp) { 3575 return ar9300_otp_size(ah)-1; 3576 } 3577 else 3578 { 3579 size = ar9300_eeprom_size(ah); 3580 if (size > 0) { 3581 return size - 1; 3582 } else { 3583 return ar9300_otp_size(ah)-1; 3584 } 3585 } 3586} 3587 3588int 3589ar9300_eeprom_volatile(struct ath_hal *ah) 3590{ 3591 if (AH9300(ah)->calibration_data_source == calibration_data_otp) { 3592 return 0; /* no eeprom, use otp */ 3593 } else { 3594 return 1; /* board has eeprom or flash */ 3595 } 3596} 3597 3598/* 3599 * need to change this to look for the pcie data in the low parts of memory 3600 * cal data needs to stop a few locations above 3601 */ 3602int 3603ar9300_eeprom_low_limit(struct ath_hal *ah) 3604{ 3605 return low_limit; 3606} 3607 3608u_int16_t 3609ar9300_compression_checksum(u_int8_t *data, int dsize) 3610{ 3611 int it; 3612 int checksum = 0; 3613 3614 for (it = 0; it < dsize; it++) { 3615 checksum += data[it]; 3616 checksum &= 0xffff; 3617 } 3618 3619 return checksum; 3620} 3621 3622int 3623ar9300_compression_header_unpack(u_int8_t *best, int *code, int *reference, 3624 int *length, int *major, int *minor) 3625{ 3626 unsigned long value[4]; 3627 3628 value[0] = best[0]; 3629 value[1] = best[1]; 3630 value[2] = best[2]; 3631 value[3] = best[3]; 3632 *code = ((value[0] >> 5) & 0x0007); 3633 *reference = (value[0] & 0x001f) | ((value[1] >> 2) & 0x0020); 3634 *length = ((value[1] << 4) & 0x07f0) | ((value[2] >> 4) & 0x000f); 3635 *major = (value[2] & 0x000f); 3636 *minor = (value[3] & 0x00ff); 3637 3638 return 4; 3639} 3640 3641 3642static HAL_BOOL 3643ar9300_uncompress_block(struct ath_hal *ah, u_int8_t *mptr, int mdata_size, 3644 u_int8_t *block, int size) 3645{ 3646 int it; 3647 int spot; 3648 int offset; 3649 int length; 3650 3651 spot = 0; 3652 for (it = 0; it < size; it += (length + 2)) { 3653 offset = block[it]; 3654 offset &= 0xff; 3655 spot += offset; 3656 length = block[it + 1]; 3657 length &= 0xff; 3658 if (length > 0 && spot >= 0 && spot + length <= mdata_size) { 3659 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3660 "%s: Restore at %d: spot=%d offset=%d length=%d\n", 3661 __func__, it, spot, offset, length); 3662 OS_MEMCPY(&mptr[spot], &block[it + 2], length); 3663 spot += length; 3664 } else if (length > 0) { 3665 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3666 "%s: Bad restore at %d: spot=%d offset=%d length=%d\n", 3667 __func__, it, spot, offset, length); 3668 return AH_FALSE; 3669 } 3670 } 3671 return AH_TRUE; 3672} 3673 3674static int 3675ar9300_eeprom_restore_internal_address(struct ath_hal *ah, 3676 ar9300_eeprom_t *mptr, int mdata_size, int cptr, u_int8_t blank) 3677{ 3678 u_int8_t word[MOUTPUT]; 3679 ar9300_eeprom_t *dptr; /* was uint8 */ 3680 int code; 3681 int reference, length, major, minor; 3682 int osize; 3683 int it; 3684 int restored; 3685 u_int16_t checksum, mchecksum; 3686 3687 restored = 0; 3688 for (it = 0; it < MSTATE; it++) { 3689 (void) ar9300_calibration_data_read_array( 3690 ah, cptr, word, compression_header_length); 3691 if (word[0] == blank && word[1] == blank && word[2] == blank && word[3] == blank) 3692 { 3693 break; 3694 } 3695 ar9300_compression_header_unpack( 3696 word, &code, &reference, &length, &major, &minor); 3697 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3698 "%s: Found block at %x: " 3699 "code=%d ref=%d length=%d major=%d minor=%d\n", 3700 __func__, cptr, code, reference, length, major, minor); 3701#ifdef DONTUSE 3702 if (length >= 1024) { 3703 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: Skipping bad header\n", __func__); 3704 cptr -= compression_header_length; 3705 continue; 3706 } 3707#endif 3708 osize = length; 3709 (void) ar9300_calibration_data_read_array( 3710 ah, cptr, word, 3711 compression_header_length + osize + compression_checksum_length); 3712 checksum = ar9300_compression_checksum( 3713 &word[compression_header_length], length); 3714 mchecksum = 3715 word[compression_header_length + osize] | 3716 (word[compression_header_length + osize + 1] << 8); 3717 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3718 "%s: checksum %x %x\n", __func__, checksum, mchecksum); 3719 if (checksum == mchecksum) { 3720 switch (code) { 3721 case _compress_none: 3722 if (length != mdata_size) { 3723 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3724 "%s: EEPROM structure size mismatch " 3725 "memory=%d eeprom=%d\n", __func__, mdata_size, length); 3726 return -1; 3727 } 3728 OS_MEMCPY((u_int8_t *)mptr, 3729 (u_int8_t *)(word + compression_header_length), length); 3730 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3731 "%s: restored eeprom %d: uncompressed, length %d\n", 3732 __func__, it, length); 3733 restored = 1; 3734 break; 3735#ifdef UNUSED 3736 case _compress_lzma: 3737 if (reference == reference_current) { 3738 dptr = mptr; 3739 } else { 3740 dptr = (u_int8_t *)ar9300_eeprom_struct_default_find_by_id( 3741 reference); 3742 if (dptr == 0) { 3743 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3744 "%s: Can't find reference eeprom struct %d\n", 3745 __func__, reference); 3746 goto done; 3747 } 3748 } 3749 usize = -1; 3750 if (usize != mdata_size) { 3751 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3752 "%s: uncompressed data is wrong size %d %d\n", 3753 __func__, usize, mdata_size); 3754 goto done; 3755 } 3756 3757 for (ib = 0; ib < mdata_size; ib++) { 3758 mptr[ib] = dptr[ib] ^ word[ib + overhead]; 3759 } 3760 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3761 "%s: restored eeprom %d: compressed, " 3762 "reference %d, length %d\n", 3763 __func__, it, reference, length); 3764 break; 3765 case _compress_pairs: 3766 if (reference == reference_current) { 3767 dptr = mptr; 3768 } else { 3769 dptr = (u_int8_t *)ar9300_eeprom_struct_default_find_by_id( 3770 reference); 3771 if (dptr == 0) { 3772 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3773 "%s: Can't find the reference " 3774 "eeprom structure %d\n", 3775 __func__, reference); 3776 goto done; 3777 } 3778 } 3779 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3780 "%s: restored eeprom %d: " 3781 "pairs, reference %d, length %d,\n", 3782 __func__, it, reference, length); 3783 break; 3784#endif 3785 case _compress_block: 3786 if (reference == reference_current) { 3787 dptr = mptr; 3788 } else { 3789 dptr = ar9300_eeprom_struct_default_find_by_id(reference); 3790 if (dptr == 0) { 3791 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3792 "%s: cant find reference eeprom struct %d\n", 3793 __func__, reference); 3794 break; 3795 } 3796 OS_MEMCPY(mptr, dptr, mdata_size); 3797 } 3798 3799 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3800 "%s: restore eeprom %d: block, reference %d, length %d\n", 3801 __func__, it, reference, length); 3802 (void) ar9300_uncompress_block(ah, 3803 (u_int8_t *) mptr, mdata_size, 3804 (u_int8_t *) (word + compression_header_length), length); 3805 restored = 1; 3806 break; 3807 default: 3808 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3809 "%s: unknown compression code %d\n", __func__, code); 3810 break; 3811 } 3812 } else { 3813 HALDEBUG(ah, HAL_DEBUG_EEPROM, 3814 "%s: skipping block with bad checksum\n", __func__); 3815 } 3816 cptr -= compression_header_length + osize + compression_checksum_length; 3817 } 3818 3819 if (!restored) { 3820 cptr = -1; 3821 } 3822 return cptr; 3823} 3824 3825static int 3826ar9300_eeprom_restore_from_dram(struct ath_hal *ah, ar9300_eeprom_t *mptr, 3827 int mdata_size) 3828{ 3829 struct ath_hal_9300 *ahp = AH9300(ah); 3830#if !defined(USE_PLATFORM_FRAMEWORK) 3831 char *cal_ptr; 3832#endif 3833 3834 HALASSERT(mdata_size > 0); 3835 3836 /* if cal_in_flash is AH_TRUE, the address sent by LMAC to HAL 3837 (i.e. ah->ah_st) is corresponding to Flash. so return from 3838 here if ar9300_eep_data_in_flash(ah) returns AH_TRUE */ 3839 if(ar9300_eep_data_in_flash(ah)) 3840 return -1; 3841 3842#if 0 3843 /* check if LMAC sent DRAM address is valid */ 3844 if (!(uintptr_t)(AH_PRIVATE(ah)->ah_st)) { 3845 return -1; 3846 } 3847#endif 3848 3849 /* When calibration data is from host, Host will copy the 3850 compressed data to the predefined DRAM location saved at ah->ah_st */ 3851#if 0 3852 ath_hal_printf(ah, "Restoring Cal data from DRAM\n"); 3853 ahp->ah_cal_mem = OS_REMAP((uintptr_t)(AH_PRIVATE(ah)->ah_st), 3854 HOST_CALDATA_SIZE); 3855#endif 3856 if (!ahp->ah_cal_mem) 3857 { 3858 HALDEBUG(ah, HAL_DEBUG_EEPROM,"%s: can't remap dram region\n", __func__); 3859 return -1; 3860 } 3861#if !defined(USE_PLATFORM_FRAMEWORK) 3862 cal_ptr = &((char *)(ahp->ah_cal_mem))[AR9300_FLASH_CAL_START_OFFSET]; 3863 OS_MEMCPY(mptr, cal_ptr, mdata_size); 3864#else 3865 OS_MEMCPY(mptr, ahp->ah_cal_mem, mdata_size); 3866#endif 3867 3868 if (mptr->eeprom_version == 0xff || 3869 mptr->template_version == 0xff || 3870 mptr->eeprom_version == 0 || 3871 mptr->template_version == 0) 3872 { 3873 /* The board is uncalibrated */ 3874 return -1; 3875 } 3876 if (mptr->eeprom_version != 0x2) 3877 { 3878 return -1; 3879 } 3880 3881 return mdata_size; 3882 3883} 3884 3885static int 3886ar9300_eeprom_restore_from_flash(struct ath_hal *ah, ar9300_eeprom_t *mptr, 3887 int mdata_size) 3888{ 3889 struct ath_hal_9300 *ahp = AH9300(ah); 3890 char *cal_ptr; 3891 3892 HALASSERT(mdata_size > 0); 3893 3894 if (!ahp->ah_cal_mem) { 3895 return -1; 3896 } 3897 3898 ath_hal_printf(ah, "Restoring Cal data from Flash\n"); 3899 /* 3900 * When calibration data is saved in flash, read 3901 * uncompressed eeprom structure from flash and return 3902 */ 3903 cal_ptr = &((char *)(ahp->ah_cal_mem))[AR9300_FLASH_CAL_START_OFFSET]; 3904 OS_MEMCPY(mptr, cal_ptr, mdata_size); 3905#if 0 3906 ar9300_swap_eeprom((ar9300_eeprom_t *)mptr); DONE IN ar9300_restore() 3907#endif 3908 if (mptr->eeprom_version == 0xff || 3909 mptr->template_version == 0xff || 3910 mptr->eeprom_version == 0 || 3911 mptr->template_version == 0) 3912 { 3913 /* The board is uncalibrated */ 3914 return -1; 3915 } 3916 if (mptr->eeprom_version != 0x2) 3917 { 3918 return -1; 3919 } 3920 return mdata_size; 3921} 3922 3923/* 3924 * Read the configuration data from the storage. We try the order with: 3925 * EEPROM, Flash, OTP. If all of above failed, use the default template. 3926 * The data can be put in any specified memory buffer. 3927 * 3928 * Returns -1 on error. 3929 * Returns address of next memory location on success. 3930 */ 3931int 3932ar9300_eeprom_restore_internal(struct ath_hal *ah, ar9300_eeprom_t *mptr, 3933 int mdata_size) 3934{ 3935 int nptr; 3936 3937 nptr = -1; 3938 3939 if ((AH9300(ah)->calibration_data_try == calibration_data_none || 3940 AH9300(ah)->calibration_data_try == calibration_data_dram) && 3941 AH9300(ah)->try_dram && nptr < 0) 3942 { 3943 ath_hal_printf(ah, "Restoring Cal data from DRAM\n"); 3944 AH9300(ah)->calibration_data_source = calibration_data_dram; 3945 AH9300(ah)->calibration_data_source_address = 0; 3946 nptr = ar9300_eeprom_restore_from_dram(ah, mptr, mdata_size); 3947 if (nptr < 0) { 3948 AH9300(ah)->calibration_data_source = calibration_data_none; 3949 AH9300(ah)->calibration_data_source_address = 0; 3950 } 3951 } 3952 3953 if ((AH9300(ah)->calibration_data_try == calibration_data_none || 3954 AH9300(ah)->calibration_data_try == calibration_data_eeprom) && 3955 AH9300(ah)->try_eeprom && nptr < 0) 3956 { 3957 /* 3958 * need to look at highest eeprom address as well as at 3959 * base_address=0x3ff where we used to write the data 3960 */ 3961 ath_hal_printf(ah, "Restoring Cal data from EEPROM\n"); 3962 AH9300(ah)->calibration_data_source = calibration_data_eeprom; 3963 if (AH9300(ah)->calibration_data_try_address != 0) { 3964 AH9300(ah)->calibration_data_source_address = 3965 AH9300(ah)->calibration_data_try_address; 3966 nptr = ar9300_eeprom_restore_internal_address( 3967 ah, mptr, mdata_size, 3968 AH9300(ah)->calibration_data_source_address, 0xff); 3969 } else { 3970 AH9300(ah)->calibration_data_source_address = 3971 ar9300_eeprom_base_address(ah); 3972 nptr = ar9300_eeprom_restore_internal_address( 3973 ah, mptr, mdata_size, 3974 AH9300(ah)->calibration_data_source_address, 0xff); 3975 if (nptr < 0 && 3976 AH9300(ah)->calibration_data_source_address != base_address) 3977 { 3978 AH9300(ah)->calibration_data_source_address = base_address; 3979 nptr = ar9300_eeprom_restore_internal_address( 3980 ah, mptr, mdata_size, 3981 AH9300(ah)->calibration_data_source_address, 0xff); 3982 } 3983 } 3984 if (nptr < 0) { 3985 AH9300(ah)->calibration_data_source = calibration_data_none; 3986 AH9300(ah)->calibration_data_source_address = 0; 3987 } 3988 } 3989 3990 /* 3991 * ##### should be an ifdef test for any AP usage, 3992 * either in driver or in nart 3993 */ 3994 if ((AH9300(ah)->calibration_data_try == calibration_data_none || 3995 AH9300(ah)->calibration_data_try == calibration_data_flash) && 3996 AH9300(ah)->try_flash && nptr < 0) 3997 { 3998 ath_hal_printf(ah, "Restoring Cal data from Flash\n"); 3999 AH9300(ah)->calibration_data_source = calibration_data_flash; 4000 /* how are we supposed to set this for flash? */ 4001 AH9300(ah)->calibration_data_source_address = 0; 4002 nptr = ar9300_eeprom_restore_from_flash(ah, mptr, mdata_size); 4003 if (nptr < 0) { 4004 AH9300(ah)->calibration_data_source = calibration_data_none; 4005 AH9300(ah)->calibration_data_source_address = 0; 4006 } 4007 } 4008 4009 if ((AH9300(ah)->calibration_data_try == calibration_data_none || 4010 AH9300(ah)->calibration_data_try == calibration_data_otp) && 4011 AH9300(ah)->try_otp && nptr < 0) 4012 { 4013 ath_hal_printf(ah, "Restoring Cal data from OTP\n"); 4014 AH9300(ah)->calibration_data_source = calibration_data_otp; 4015 if (AH9300(ah)->calibration_data_try_address != 0) { 4016 AH9300(ah)->calibration_data_source_address = 4017 AH9300(ah)->calibration_data_try_address; 4018 } else { 4019 AH9300(ah)->calibration_data_source_address = 4020 ar9300_eeprom_base_address(ah); 4021 } 4022 nptr = ar9300_eeprom_restore_internal_address( 4023 ah, mptr, mdata_size, AH9300(ah)->calibration_data_source_address, 0); 4024 if (nptr < 0) { 4025 AH9300(ah)->calibration_data_source = calibration_data_none; 4026 AH9300(ah)->calibration_data_source_address = 0; 4027 } 4028 } 4029 4030#ifdef ATH_CAL_NAND_FLASH 4031 if ((AH9300(ah)->calibration_data_try == calibration_data_none || 4032 AH9300(ah)->calibration_data_try == calibration_data_nand) && 4033 AH9300(ah)->try_nand && nptr < 0) 4034 { 4035 AH9300(ah)->calibration_data_source = calibration_data_nand; 4036 AH9300(ah)->calibration_data_source_address = ((unsigned int)(AH_PRIVATE(ah)->ah_st)) + base_address_nand; 4037 if(ar9300_calibration_data_read( 4038 ah, AH9300(ah)->calibration_data_source_address, 4039 (u_int8_t *)mptr, mdata_size) == AH_TRUE) 4040 { 4041 nptr = mdata_size; 4042 } 4043 /*nptr=ar9300EepromRestoreInternalAddress(ah, mptr, mdataSize, CalibrationDataSourceAddress);*/ 4044 if(nptr < 0) 4045 { 4046 AH9300(ah)->calibration_data_source = calibration_data_none; 4047 AH9300(ah)->calibration_data_source_address = 0; 4048 } 4049 } 4050#endif 4051 if (nptr < 0) { 4052 ath_hal_printf(ah, "%s[%d] No vaid CAL, calling default template\n", 4053 __func__, __LINE__); 4054 nptr = ar9300_eeprom_restore_something(ah, mptr, mdata_size); 4055 } 4056 4057 return nptr; 4058} 4059 4060/******************************************************************************/ 4061/*! 4062** \brief Eeprom Swapping Function 4063** 4064** This function will swap the contents of the "longer" EEPROM data items 4065** to ensure they are consistent with the endian requirements for the platform 4066** they are being compiled for 4067** 4068** \param eh Pointer to the EEPROM data structure 4069** \return N/A 4070*/ 4071#if AH_BYTE_ORDER == AH_BIG_ENDIAN 4072void 4073ar9300_swap_eeprom(ar9300_eeprom_t *eep) 4074{ 4075 u_int32_t dword; 4076 u_int16_t word; 4077 int i; 4078 4079 word = __bswap16(eep->base_eep_header.reg_dmn[0]); 4080 eep->base_eep_header.reg_dmn[0] = word; 4081 4082 word = __bswap16(eep->base_eep_header.reg_dmn[1]); 4083 eep->base_eep_header.reg_dmn[1] = word; 4084 4085 dword = __bswap32(eep->base_eep_header.swreg); 4086 eep->base_eep_header.swreg = dword; 4087 4088 dword = __bswap32(eep->modal_header_2g.ant_ctrl_common); 4089 eep->modal_header_2g.ant_ctrl_common = dword; 4090 4091 dword = __bswap32(eep->modal_header_2g.ant_ctrl_common2); 4092 eep->modal_header_2g.ant_ctrl_common2 = dword; 4093 4094 dword = __bswap32(eep->modal_header_2g.paprd_rate_mask_ht20); 4095 eep->modal_header_2g.paprd_rate_mask_ht20 = dword; 4096 4097 dword = __bswap32(eep->modal_header_2g.paprd_rate_mask_ht40); 4098 eep->modal_header_2g.paprd_rate_mask_ht40 = dword; 4099 4100 dword = __bswap32(eep->modal_header_5g.ant_ctrl_common); 4101 eep->modal_header_5g.ant_ctrl_common = dword; 4102 4103 dword = __bswap32(eep->modal_header_5g.ant_ctrl_common2); 4104 eep->modal_header_5g.ant_ctrl_common2 = dword; 4105 4106 dword = __bswap32(eep->modal_header_5g.paprd_rate_mask_ht20); 4107 eep->modal_header_5g.paprd_rate_mask_ht20 = dword; 4108 4109 dword = __bswap32(eep->modal_header_5g.paprd_rate_mask_ht40); 4110 eep->modal_header_5g.paprd_rate_mask_ht40 = dword; 4111 4112 for (i = 0; i < OSPREY_MAX_CHAINS; i++) { 4113 word = __bswap16(eep->modal_header_2g.ant_ctrl_chain[i]); 4114 eep->modal_header_2g.ant_ctrl_chain[i] = word; 4115 4116 word = __bswap16(eep->modal_header_5g.ant_ctrl_chain[i]); 4117 eep->modal_header_5g.ant_ctrl_chain[i] = word; 4118 } 4119} 4120 4121void ar9300_eeprom_template_swap(void) 4122{ 4123 int it; 4124 ar9300_eeprom_t *dptr; 4125 4126 for (it = 0; it < ARRAY_LENGTH(default9300); it++) { 4127 dptr = ar9300_eeprom_struct_default(it); 4128 if (dptr != 0) { 4129 ar9300_swap_eeprom(dptr); 4130 } 4131 } 4132} 4133#endif 4134 4135 4136/* 4137 * Restore the configuration structure by reading the eeprom. 4138 * This function destroys any existing in-memory structure content. 4139 */ 4140HAL_BOOL 4141ar9300_eeprom_restore(struct ath_hal *ah) 4142{ 4143 struct ath_hal_9300 *ahp = AH9300(ah); 4144 ar9300_eeprom_t *mptr; 4145 int mdata_size; 4146 HAL_BOOL status = AH_FALSE; 4147 4148 mptr = &ahp->ah_eeprom; 4149 mdata_size = ar9300_eeprom_struct_size(); 4150 4151 if (mptr != 0 && mdata_size > 0) { 4152#if AH_BYTE_ORDER == AH_BIG_ENDIAN 4153 ar9300_eeprom_template_swap(); 4154 ar9300_swap_eeprom(mptr); 4155#endif 4156 /* 4157 * At this point, mptr points to the eeprom data structure 4158 * in it's "default" state. If this is big endian, swap the 4159 * data structures back to "little endian" form. 4160 */ 4161 if (ar9300_eeprom_restore_internal(ah, mptr, mdata_size) >= 0) { 4162 status = AH_TRUE; 4163 } 4164 4165#if AH_BYTE_ORDER == AH_BIG_ENDIAN 4166 /* Second Swap, back to Big Endian */ 4167 ar9300_eeprom_template_swap(); 4168 ar9300_swap_eeprom(mptr); 4169#endif 4170 4171 } 4172 ahp->ah_2g_paprd_rate_mask_ht40 = 4173 mptr->modal_header_2g.paprd_rate_mask_ht40; 4174 ahp->ah_2g_paprd_rate_mask_ht20 = 4175 mptr->modal_header_2g.paprd_rate_mask_ht20; 4176 ahp->ah_5g_paprd_rate_mask_ht40 = 4177 mptr->modal_header_5g.paprd_rate_mask_ht40; 4178 ahp->ah_5g_paprd_rate_mask_ht20 = 4179 mptr->modal_header_5g.paprd_rate_mask_ht20; 4180 return status; 4181} 4182 4183int32_t ar9300_thermometer_get(struct ath_hal *ah) 4184{ 4185 struct ath_hal_9300 *ahp = AH9300(ah); 4186 int thermometer; 4187 thermometer = 4188 (ahp->ah_eeprom.base_eep_header.misc_configuration >> 1) & 0x3; 4189 thermometer--; 4190 return thermometer; 4191} 4192 4193HAL_BOOL ar9300_thermometer_apply(struct ath_hal *ah) 4194{ 4195 int thermometer = ar9300_thermometer_get(ah); 4196 4197/* ch0_RXTX4 */ 4198/*#define AR_PHY_65NM_CH0_RXTX4 AR_PHY_65NM(ch0_RXTX4)*/ 4199#define AR_PHY_65NM_CH1_RXTX4 AR_PHY_65NM(ch1_RXTX4) 4200#define AR_PHY_65NM_CH2_RXTX4 AR_PHY_65NM(ch2_RXTX4) 4201/*#define AR_PHY_65NM_CH0_RXTX4_THERM_ON 0x10000000*/ 4202/*#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_S 28*/ 4203#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR_S 29 4204#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR \ 4205 (0x1<<AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR_S) 4206 4207 if (thermometer < 0) { 4208 OS_REG_RMW_FIELD(ah, 4209 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 0); 4210 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 4211 OS_REG_RMW_FIELD(ah, 4212 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 0); 4213 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 4214 OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, 4215 AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 0); 4216 } 4217 } 4218 OS_REG_RMW_FIELD(ah, 4219 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4220 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 4221 OS_REG_RMW_FIELD(ah, 4222 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4223 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 4224 OS_REG_RMW_FIELD(ah, 4225 AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4226 } 4227 } 4228 } else { 4229 OS_REG_RMW_FIELD(ah, 4230 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 1); 4231 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 4232 OS_REG_RMW_FIELD(ah, 4233 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 1); 4234 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 4235 OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, 4236 AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 1); 4237 } 4238 } 4239 if (thermometer == 0) { 4240 OS_REG_RMW_FIELD(ah, 4241 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 1); 4242 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 4243 OS_REG_RMW_FIELD(ah, 4244 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4245 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 4246 OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, 4247 AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4248 } 4249 } 4250 } else if (thermometer == 1) { 4251 OS_REG_RMW_FIELD(ah, 4252 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4253 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 4254 OS_REG_RMW_FIELD(ah, 4255 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 1); 4256 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 4257 OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, 4258 AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4259 } 4260 } 4261 } else if (thermometer == 2) { 4262 OS_REG_RMW_FIELD(ah, 4263 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4264 if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { 4265 OS_REG_RMW_FIELD(ah, 4266 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); 4267 if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { 4268 OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, 4269 AR_PHY_65NM_CH0_RXTX4_THERM_ON, 1); 4270 } 4271 } 4272 } 4273 } 4274 return AH_TRUE; 4275} 4276 4277static int32_t ar9300_tuning_caps_params_get(struct ath_hal *ah) 4278{ 4279 int tuning_caps_params; 4280 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 4281 tuning_caps_params = eep->base_eep_header.params_for_tuning_caps[0]; 4282 return tuning_caps_params; 4283} 4284 4285/* 4286 * Read the tuning caps params from eeprom and set to correct register. 4287 * To regulation the frequency accuracy. 4288 */ 4289HAL_BOOL ar9300_tuning_caps_apply(struct ath_hal *ah) 4290{ 4291 int tuning_caps_params; 4292 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 4293 tuning_caps_params = ar9300_tuning_caps_params_get(ah); 4294 if ((eep->base_eep_header.feature_enable & 0x40) >> 6) { 4295 tuning_caps_params &= 0x7f; 4296 4297 if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah) || AR_SREV_WASP(ah)) { 4298 return AH_TRUE; 4299 } else if (AR_SREV_SCORPION(ah)) { 4300 OS_REG_RMW_FIELD(ah, 4301 AR_SCORPION_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPINDAC, 4302 tuning_caps_params); 4303 OS_REG_RMW_FIELD(ah, 4304 AR_SCORPION_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPOUTDAC, 4305 tuning_caps_params); 4306 } else { 4307 OS_REG_RMW_FIELD(ah, 4308 AR_OSPREY_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPINDAC, 4309 tuning_caps_params); 4310 OS_REG_RMW_FIELD(ah, 4311 AR_OSPREY_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPOUTDAC, 4312 tuning_caps_params); 4313 } 4314 4315 } 4316 return AH_TRUE; 4317} 4318 4319/* 4320 * Read the tx_frame_to_xpa_on param from eeprom and apply the value to 4321 * correct register. 4322 */ 4323HAL_BOOL ar9300_xpa_timing_control_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) 4324{ 4325 u_int8_t xpa_timing_control; 4326 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 4327 if ((eep->base_eep_header.feature_enable & 0x80) >> 7) { 4328 if (AR_SREV_OSPREY(ah) || AR_SREV_AR9580(ah) || AR_SREV_WASP(ah)) { 4329 if (is_2ghz) { 4330 xpa_timing_control = eep->modal_header_2g.tx_frame_to_xpa_on; 4331 OS_REG_RMW_FIELD(ah, 4332 AR_PHY_XPA_TIMING_CTL, AR_PHY_XPA_TIMING_CTL_FRAME_XPAB_ON, 4333 xpa_timing_control); 4334 } else { 4335 xpa_timing_control = eep->modal_header_5g.tx_frame_to_xpa_on; 4336 OS_REG_RMW_FIELD(ah, 4337 AR_PHY_XPA_TIMING_CTL, AR_PHY_XPA_TIMING_CTL_FRAME_XPAA_ON, 4338 xpa_timing_control); 4339 } 4340 } 4341 } 4342 return AH_TRUE; 4343} 4344 4345 4346/* 4347 * Read the xLNA_bias_strength param from eeprom and apply the value to 4348 * correct register. 4349 */ 4350HAL_BOOL ar9300_x_lNA_bias_strength_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) 4351{ 4352 u_int8_t x_lNABias; 4353 u_int32_t value = 0; 4354 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 4355 4356 if ((eep->base_eep_header.misc_configuration & 0x40) >> 6) { 4357 if (AR_SREV_OSPREY(ah)) { 4358 if (is_2ghz) { 4359 x_lNABias = eep->modal_header_2g.xLNA_bias_strength; 4360 } else { 4361 x_lNABias = eep->modal_header_5g.xLNA_bias_strength; 4362 } 4363 value = x_lNABias & ( 0x03 ); // bit0,1 for chain0 4364 OS_REG_RMW_FIELD(ah, 4365 AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS, value); 4366 value = (x_lNABias >> 2) & ( 0x03 ); // bit2,3 for chain1 4367 OS_REG_RMW_FIELD(ah, 4368 AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS, value); 4369 value = (x_lNABias >> 4) & ( 0x03 ); // bit4,5 for chain2 4370 OS_REG_RMW_FIELD(ah, 4371 AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS, value); 4372 } 4373 } 4374 return AH_TRUE; 4375} 4376 4377 4378/* 4379 * Read EEPROM header info and program the device for correct operation 4380 * given the channel value. 4381 */ 4382HAL_BOOL 4383ar9300_eeprom_set_board_values(struct ath_hal *ah, const struct ieee80211_channel *chan) 4384{ 4385 HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan); 4386 4387 ar9300_xpa_bias_level_apply(ah, IEEE80211_IS_CHAN_2GHZ(chan)); 4388 4389 ar9300_xpa_timing_control_apply(ah, IEEE80211_IS_CHAN_2GHZ(chan)); 4390 4391 ar9300_ant_ctrl_apply(ah, IEEE80211_IS_CHAN_2GHZ(chan)); 4392 ar9300_drive_strength_apply(ah); 4393 4394 ar9300_x_lNA_bias_strength_apply(ah, IEEE80211_IS_CHAN_2GHZ(chan)); 4395 4396 /* wait for Poseidon internal regular turnning */ 4397 /* for Hornet we move it before initPLL to avoid an access issue */ 4398 /* Function not used when EMULATION. */ 4399 if (!AR_SREV_HORNET(ah) && !AR_SREV_WASP(ah)) { 4400 ar9300_internal_regulator_apply(ah); 4401 } 4402 4403 ar9300_attenuation_apply(ah, ichan->channel); 4404 ar9300_quick_drop_apply(ah, ichan->channel); 4405 ar9300_thermometer_apply(ah); 4406 if(!AR_SREV_WASP(ah)) 4407 { 4408 ar9300_tuning_caps_apply(ah); 4409 } 4410 4411 ar9300_tx_end_to_xpab_off_apply(ah, ichan->channel); 4412 4413 return AH_TRUE; 4414} 4415 4416u_int8_t * 4417ar9300_eeprom_get_spur_chans_ptr(struct ath_hal *ah, HAL_BOOL is_2ghz) 4418{ 4419 ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; 4420 4421 if (is_2ghz) { 4422 return &(eep->modal_header_2g.spur_chans[0]); 4423 } else { 4424 return &(eep->modal_header_5g.spur_chans[0]); 4425 } 4426} 4427 4428static u_int8_t ar9300_eeprom_get_tx_gain_table_number_max(struct ath_hal *ah) 4429{ 4430 unsigned long tx_gain_table_max; 4431 tx_gain_table_max = OS_REG_READ_FIELD(ah, 4432 AR_PHY_TPC_7, AR_PHY_TPC_7_TX_GAIN_TABLE_MAX); 4433 return tx_gain_table_max; 4434} 4435 4436u_int8_t ar9300_eeprom_tx_gain_table_index_max_apply(struct ath_hal *ah, u_int16_t channel) 4437{ 4438 unsigned int index; 4439 ar9300_eeprom_t *ahp_Eeprom; 4440 struct ath_hal_9300 *ahp = AH9300(ah); 4441 4442 ahp_Eeprom = &ahp->ah_eeprom; 4443 4444 if (ahp_Eeprom->base_ext1.misc_enable == 0) 4445 return AH_FALSE; 4446 4447 if (channel < 4000) 4448 { 4449 index = ahp_Eeprom->modal_header_2g.tx_gain_cap; 4450 } 4451 else 4452 { 4453 index = ahp_Eeprom->modal_header_5g.tx_gain_cap; 4454 } 4455 4456 OS_REG_RMW_FIELD(ah, 4457 AR_PHY_TPC_7, AR_PHY_TPC_7_TX_GAIN_TABLE_MAX, index); 4458 return AH_TRUE; 4459} 4460 4461static u_int8_t ar9300_eeprom_get_pcdac_tx_gain_table_i(struct ath_hal *ah, 4462 int i, u_int8_t *pcdac) 4463{ 4464 unsigned long tx_gain; 4465 u_int8_t tx_gain_table_max; 4466 tx_gain_table_max = ar9300_eeprom_get_tx_gain_table_number_max(ah); 4467 if (i <= 0 || i > tx_gain_table_max) { 4468 *pcdac = 0; 4469 return AH_FALSE; 4470 } 4471 4472 tx_gain = OS_REG_READ(ah, AR_PHY_TXGAIN_TAB(1) + i * 4); 4473 *pcdac = ((tx_gain >> 24) & 0xff); 4474 return AH_TRUE; 4475} 4476 4477u_int8_t ar9300_eeprom_set_tx_gain_cap(struct ath_hal *ah, 4478 int *tx_gain_max) 4479// pcdac read back from reg, read back value depends on reset 2GHz/5GHz ini 4480// tx_gain_table, this function will be called twice after each 4481// band's calibration. 4482// after 2GHz cal, tx_gain_max[0] has 2GHz, calibration max txgain, 4483// tx_gain_max[1]=-100 4484// after 5GHz cal, tx_gain_max[0],tx_gain_max[1] have calibration 4485// value for both band 4486// reset is on 5GHz, reg reading from tx_gain_table is for 5GHz, 4487// so program can't recalculate 2g.tx_gain_cap at this point. 4488{ 4489 int i = 0, ig, im = 0; 4490 u_int8_t pcdac = 0; 4491 u_int8_t tx_gain_table_max; 4492 ar9300_eeprom_t *ahp_Eeprom; 4493 struct ath_hal_9300 *ahp = AH9300(ah); 4494 4495 ahp_Eeprom = &ahp->ah_eeprom; 4496 4497 if (ahp_Eeprom->base_ext1.misc_enable == 0) 4498 return AH_FALSE; 4499 4500 tx_gain_table_max = ar9300_eeprom_get_tx_gain_table_number_max(ah); 4501 4502 for (i = 0; i < 2; i++) { 4503 if (tx_gain_max[i]>-100) { // -100 didn't cal that band. 4504 if ( i== 0) { 4505 if (tx_gain_max[1]>-100) { 4506 continue; 4507 // both band are calibrated, skip 2GHz 2g.tx_gain_cap reset 4508 } 4509 } 4510 for (ig = 1; ig <= tx_gain_table_max; ig++) { 4511 if (ah != 0 && ah->ah_reset != 0) 4512 { 4513 ar9300_eeprom_get_pcdac_tx_gain_table_i(ah, ig, &pcdac); 4514 if (pcdac >= tx_gain_max[i]) 4515 break; 4516 } 4517 } 4518 if (ig+1 <= tx_gain_table_max) { 4519 if (pcdac == tx_gain_max[i]) 4520 im = ig; 4521 else 4522 im = ig + 1; 4523 if (i == 0) { 4524 ahp_Eeprom->modal_header_2g.tx_gain_cap = im; 4525 } else { 4526 ahp_Eeprom->modal_header_5g.tx_gain_cap = im; 4527 } 4528 } else { 4529 if (i == 0) { 4530 ahp_Eeprom->modal_header_2g.tx_gain_cap = ig; 4531 } else { 4532 ahp_Eeprom->modal_header_5g.tx_gain_cap = ig; 4533 } 4534 } 4535 } 4536 } 4537 return AH_TRUE; 4538} 4539