zil.c revision 168404
1/*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21/*
22 * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23 * Use is subject to license terms.
24 */
25
26#pragma ident	"%Z%%M%	%I%	%E% SMI"
27
28#include <sys/zfs_context.h>
29#include <sys/spa.h>
30#include <sys/dmu.h>
31#include <sys/zap.h>
32#include <sys/arc.h>
33#include <sys/stat.h>
34#include <sys/resource.h>
35#include <sys/zil.h>
36#include <sys/zil_impl.h>
37#include <sys/dsl_dataset.h>
38#include <sys/vdev.h>
39#include <sys/dmu_tx.h>
40
41/*
42 * The zfs intent log (ZIL) saves transaction records of system calls
43 * that change the file system in memory with enough information
44 * to be able to replay them. These are stored in memory until
45 * either the DMU transaction group (txg) commits them to the stable pool
46 * and they can be discarded, or they are flushed to the stable log
47 * (also in the pool) due to a fsync, O_DSYNC or other synchronous
48 * requirement. In the event of a panic or power fail then those log
49 * records (transactions) are replayed.
50 *
51 * There is one ZIL per file system. Its on-disk (pool) format consists
52 * of 3 parts:
53 *
54 * 	- ZIL header
55 * 	- ZIL blocks
56 * 	- ZIL records
57 *
58 * A log record holds a system call transaction. Log blocks can
59 * hold many log records and the blocks are chained together.
60 * Each ZIL block contains a block pointer (blkptr_t) to the next
61 * ZIL block in the chain. The ZIL header points to the first
62 * block in the chain. Note there is not a fixed place in the pool
63 * to hold blocks. They are dynamically allocated and freed as
64 * needed from the blocks available. Figure X shows the ZIL structure:
65 */
66
67/*
68 * This global ZIL switch affects all pools
69 */
70int zil_disable = 0;	/* disable intent logging */
71SYSCTL_DECL(_vfs_zfs);
72TUNABLE_INT("vfs.zfs.zil_disable", &zil_disable);
73SYSCTL_INT(_vfs_zfs, OID_AUTO, zil_disable, CTLFLAG_RDTUN, &zil_disable, 0,
74    "Disable ZFS Intent Log (ZIL)");
75
76/*
77 * Tunable parameter for debugging or performance analysis.  Setting
78 * zfs_nocacheflush will cause corruption on power loss if a volatile
79 * out-of-order write cache is enabled.
80 */
81boolean_t zfs_nocacheflush = B_FALSE;
82TUNABLE_INT("vfs.zfs.cache_flush_disable", &zfs_nocacheflush);
83SYSCTL_INT(_vfs_zfs, OID_AUTO, cache_flush_disable, CTLFLAG_RDTUN,
84    &zfs_nocacheflush, 0, "Disable cache flush");
85
86static kmem_cache_t *zil_lwb_cache;
87
88static int
89zil_dva_compare(const void *x1, const void *x2)
90{
91	const dva_t *dva1 = x1;
92	const dva_t *dva2 = x2;
93
94	if (DVA_GET_VDEV(dva1) < DVA_GET_VDEV(dva2))
95		return (-1);
96	if (DVA_GET_VDEV(dva1) > DVA_GET_VDEV(dva2))
97		return (1);
98
99	if (DVA_GET_OFFSET(dva1) < DVA_GET_OFFSET(dva2))
100		return (-1);
101	if (DVA_GET_OFFSET(dva1) > DVA_GET_OFFSET(dva2))
102		return (1);
103
104	return (0);
105}
106
107static void
108zil_dva_tree_init(avl_tree_t *t)
109{
110	avl_create(t, zil_dva_compare, sizeof (zil_dva_node_t),
111	    offsetof(zil_dva_node_t, zn_node));
112}
113
114static void
115zil_dva_tree_fini(avl_tree_t *t)
116{
117	zil_dva_node_t *zn;
118	void *cookie = NULL;
119
120	while ((zn = avl_destroy_nodes(t, &cookie)) != NULL)
121		kmem_free(zn, sizeof (zil_dva_node_t));
122
123	avl_destroy(t);
124}
125
126static int
127zil_dva_tree_add(avl_tree_t *t, dva_t *dva)
128{
129	zil_dva_node_t *zn;
130	avl_index_t where;
131
132	if (avl_find(t, dva, &where) != NULL)
133		return (EEXIST);
134
135	zn = kmem_alloc(sizeof (zil_dva_node_t), KM_SLEEP);
136	zn->zn_dva = *dva;
137	avl_insert(t, zn, where);
138
139	return (0);
140}
141
142static zil_header_t *
143zil_header_in_syncing_context(zilog_t *zilog)
144{
145	return ((zil_header_t *)zilog->zl_header);
146}
147
148static void
149zil_init_log_chain(zilog_t *zilog, blkptr_t *bp)
150{
151	zio_cksum_t *zc = &bp->blk_cksum;
152
153	zc->zc_word[ZIL_ZC_GUID_0] = spa_get_random(-1ULL);
154	zc->zc_word[ZIL_ZC_GUID_1] = spa_get_random(-1ULL);
155	zc->zc_word[ZIL_ZC_OBJSET] = dmu_objset_id(zilog->zl_os);
156	zc->zc_word[ZIL_ZC_SEQ] = 1ULL;
157}
158
159/*
160 * Read a log block, make sure it's valid, and byteswap it if necessary.
161 */
162static int
163zil_read_log_block(zilog_t *zilog, const blkptr_t *bp, arc_buf_t **abufpp)
164{
165	blkptr_t blk = *bp;
166	zbookmark_t zb;
167	uint32_t aflags = ARC_WAIT;
168	int error;
169
170	zb.zb_objset = bp->blk_cksum.zc_word[ZIL_ZC_OBJSET];
171	zb.zb_object = 0;
172	zb.zb_level = -1;
173	zb.zb_blkid = bp->blk_cksum.zc_word[ZIL_ZC_SEQ];
174
175	*abufpp = NULL;
176
177	error = arc_read(NULL, zilog->zl_spa, &blk, byteswap_uint64_array,
178	    arc_getbuf_func, abufpp, ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL |
179	    ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SCRUB, &aflags, &zb);
180
181	if (error == 0) {
182		char *data = (*abufpp)->b_data;
183		uint64_t blksz = BP_GET_LSIZE(bp);
184		zil_trailer_t *ztp = (zil_trailer_t *)(data + blksz) - 1;
185		zio_cksum_t cksum = bp->blk_cksum;
186
187		/*
188		 * Sequence numbers should be... sequential.  The checksum
189		 * verifier for the next block should be bp's checksum plus 1.
190		 */
191		cksum.zc_word[ZIL_ZC_SEQ]++;
192
193		if (bcmp(&cksum, &ztp->zit_next_blk.blk_cksum, sizeof (cksum)))
194			error = ESTALE;
195		else if (BP_IS_HOLE(&ztp->zit_next_blk))
196			error = ENOENT;
197		else if (ztp->zit_nused > (blksz - sizeof (zil_trailer_t)))
198			error = EOVERFLOW;
199
200		if (error) {
201			VERIFY(arc_buf_remove_ref(*abufpp, abufpp) == 1);
202			*abufpp = NULL;
203		}
204	}
205
206	dprintf("error %d on %llu:%llu\n", error, zb.zb_objset, zb.zb_blkid);
207
208	return (error);
209}
210
211/*
212 * Parse the intent log, and call parse_func for each valid record within.
213 * Return the highest sequence number.
214 */
215uint64_t
216zil_parse(zilog_t *zilog, zil_parse_blk_func_t *parse_blk_func,
217    zil_parse_lr_func_t *parse_lr_func, void *arg, uint64_t txg)
218{
219	const zil_header_t *zh = zilog->zl_header;
220	uint64_t claim_seq = zh->zh_claim_seq;
221	uint64_t seq = 0;
222	uint64_t max_seq = 0;
223	blkptr_t blk = zh->zh_log;
224	arc_buf_t *abuf;
225	char *lrbuf, *lrp;
226	zil_trailer_t *ztp;
227	int reclen, error;
228
229	if (BP_IS_HOLE(&blk))
230		return (max_seq);
231
232	/*
233	 * Starting at the block pointed to by zh_log we read the log chain.
234	 * For each block in the chain we strongly check that block to
235	 * ensure its validity.  We stop when an invalid block is found.
236	 * For each block pointer in the chain we call parse_blk_func().
237	 * For each record in each valid block we call parse_lr_func().
238	 * If the log has been claimed, stop if we encounter a sequence
239	 * number greater than the highest claimed sequence number.
240	 */
241	zil_dva_tree_init(&zilog->zl_dva_tree);
242	for (;;) {
243		seq = blk.blk_cksum.zc_word[ZIL_ZC_SEQ];
244
245		if (claim_seq != 0 && seq > claim_seq)
246			break;
247
248		ASSERT(max_seq < seq);
249		max_seq = seq;
250
251		error = zil_read_log_block(zilog, &blk, &abuf);
252
253		if (parse_blk_func != NULL)
254			parse_blk_func(zilog, &blk, arg, txg);
255
256		if (error)
257			break;
258
259		lrbuf = abuf->b_data;
260		ztp = (zil_trailer_t *)(lrbuf + BP_GET_LSIZE(&blk)) - 1;
261		blk = ztp->zit_next_blk;
262
263		if (parse_lr_func == NULL) {
264			VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
265			continue;
266		}
267
268		for (lrp = lrbuf; lrp < lrbuf + ztp->zit_nused; lrp += reclen) {
269			lr_t *lr = (lr_t *)lrp;
270			reclen = lr->lrc_reclen;
271			ASSERT3U(reclen, >=, sizeof (lr_t));
272			parse_lr_func(zilog, lr, arg, txg);
273		}
274		VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
275	}
276	zil_dva_tree_fini(&zilog->zl_dva_tree);
277
278	return (max_seq);
279}
280
281/* ARGSUSED */
282static void
283zil_claim_log_block(zilog_t *zilog, blkptr_t *bp, void *tx, uint64_t first_txg)
284{
285	spa_t *spa = zilog->zl_spa;
286	int err;
287
288	/*
289	 * Claim log block if not already committed and not already claimed.
290	 */
291	if (bp->blk_birth >= first_txg &&
292	    zil_dva_tree_add(&zilog->zl_dva_tree, BP_IDENTITY(bp)) == 0) {
293		err = zio_wait(zio_claim(NULL, spa, first_txg, bp, NULL, NULL));
294		ASSERT(err == 0);
295	}
296}
297
298static void
299zil_claim_log_record(zilog_t *zilog, lr_t *lrc, void *tx, uint64_t first_txg)
300{
301	if (lrc->lrc_txtype == TX_WRITE) {
302		lr_write_t *lr = (lr_write_t *)lrc;
303		zil_claim_log_block(zilog, &lr->lr_blkptr, tx, first_txg);
304	}
305}
306
307/* ARGSUSED */
308static void
309zil_free_log_block(zilog_t *zilog, blkptr_t *bp, void *tx, uint64_t claim_txg)
310{
311	zio_free_blk(zilog->zl_spa, bp, dmu_tx_get_txg(tx));
312}
313
314static void
315zil_free_log_record(zilog_t *zilog, lr_t *lrc, void *tx, uint64_t claim_txg)
316{
317	/*
318	 * If we previously claimed it, we need to free it.
319	 */
320	if (claim_txg != 0 && lrc->lrc_txtype == TX_WRITE) {
321		lr_write_t *lr = (lr_write_t *)lrc;
322		blkptr_t *bp = &lr->lr_blkptr;
323		if (bp->blk_birth >= claim_txg &&
324		    !zil_dva_tree_add(&zilog->zl_dva_tree, BP_IDENTITY(bp))) {
325			(void) arc_free(NULL, zilog->zl_spa,
326			    dmu_tx_get_txg(tx), bp, NULL, NULL, ARC_WAIT);
327		}
328	}
329}
330
331/*
332 * Create an on-disk intent log.
333 */
334static void
335zil_create(zilog_t *zilog)
336{
337	const zil_header_t *zh = zilog->zl_header;
338	lwb_t *lwb;
339	uint64_t txg = 0;
340	dmu_tx_t *tx = NULL;
341	blkptr_t blk;
342	int error = 0;
343
344	/*
345	 * Wait for any previous destroy to complete.
346	 */
347	txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
348
349	ASSERT(zh->zh_claim_txg == 0);
350	ASSERT(zh->zh_replay_seq == 0);
351
352	blk = zh->zh_log;
353
354	/*
355	 * If we don't already have an initial log block, allocate one now.
356	 */
357	if (BP_IS_HOLE(&blk)) {
358		tx = dmu_tx_create(zilog->zl_os);
359		(void) dmu_tx_assign(tx, TXG_WAIT);
360		dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
361		txg = dmu_tx_get_txg(tx);
362
363		error = zio_alloc_blk(zilog->zl_spa, ZIL_MIN_BLKSZ, &blk,
364		    NULL, txg);
365
366		if (error == 0)
367			zil_init_log_chain(zilog, &blk);
368	}
369
370	/*
371	 * Allocate a log write buffer (lwb) for the first log block.
372	 */
373	if (error == 0) {
374		lwb = kmem_cache_alloc(zil_lwb_cache, KM_SLEEP);
375		lwb->lwb_zilog = zilog;
376		lwb->lwb_blk = blk;
377		lwb->lwb_nused = 0;
378		lwb->lwb_sz = BP_GET_LSIZE(&lwb->lwb_blk);
379		lwb->lwb_buf = zio_buf_alloc(lwb->lwb_sz);
380		lwb->lwb_max_txg = txg;
381		lwb->lwb_zio = NULL;
382
383		mutex_enter(&zilog->zl_lock);
384		list_insert_tail(&zilog->zl_lwb_list, lwb);
385		mutex_exit(&zilog->zl_lock);
386	}
387
388	/*
389	 * If we just allocated the first log block, commit our transaction
390	 * and wait for zil_sync() to stuff the block poiner into zh_log.
391	 * (zh is part of the MOS, so we cannot modify it in open context.)
392	 */
393	if (tx != NULL) {
394		dmu_tx_commit(tx);
395		txg_wait_synced(zilog->zl_dmu_pool, txg);
396	}
397
398	ASSERT(bcmp(&blk, &zh->zh_log, sizeof (blk)) == 0);
399}
400
401/*
402 * In one tx, free all log blocks and clear the log header.
403 * If keep_first is set, then we're replaying a log with no content.
404 * We want to keep the first block, however, so that the first
405 * synchronous transaction doesn't require a txg_wait_synced()
406 * in zil_create().  We don't need to txg_wait_synced() here either
407 * when keep_first is set, because both zil_create() and zil_destroy()
408 * will wait for any in-progress destroys to complete.
409 */
410void
411zil_destroy(zilog_t *zilog, boolean_t keep_first)
412{
413	const zil_header_t *zh = zilog->zl_header;
414	lwb_t *lwb;
415	dmu_tx_t *tx;
416	uint64_t txg;
417
418	/*
419	 * Wait for any previous destroy to complete.
420	 */
421	txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
422
423	if (BP_IS_HOLE(&zh->zh_log))
424		return;
425
426	tx = dmu_tx_create(zilog->zl_os);
427	(void) dmu_tx_assign(tx, TXG_WAIT);
428	dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
429	txg = dmu_tx_get_txg(tx);
430
431	mutex_enter(&zilog->zl_lock);
432
433	ASSERT3U(zilog->zl_destroy_txg, <, txg);
434	zilog->zl_destroy_txg = txg;
435	zilog->zl_keep_first = keep_first;
436
437	if (!list_is_empty(&zilog->zl_lwb_list)) {
438		ASSERT(zh->zh_claim_txg == 0);
439		ASSERT(!keep_first);
440		while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
441			list_remove(&zilog->zl_lwb_list, lwb);
442			if (lwb->lwb_buf != NULL)
443				zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
444			zio_free_blk(zilog->zl_spa, &lwb->lwb_blk, txg);
445			kmem_cache_free(zil_lwb_cache, lwb);
446		}
447	} else {
448		if (!keep_first) {
449			(void) zil_parse(zilog, zil_free_log_block,
450			    zil_free_log_record, tx, zh->zh_claim_txg);
451		}
452	}
453	mutex_exit(&zilog->zl_lock);
454
455	dmu_tx_commit(tx);
456
457	if (keep_first)			/* no need to wait in this case */
458		return;
459
460	txg_wait_synced(zilog->zl_dmu_pool, txg);
461	ASSERT(BP_IS_HOLE(&zh->zh_log));
462}
463
464int
465zil_claim(char *osname, void *txarg)
466{
467	dmu_tx_t *tx = txarg;
468	uint64_t first_txg = dmu_tx_get_txg(tx);
469	zilog_t *zilog;
470	zil_header_t *zh;
471	objset_t *os;
472	int error;
473
474	error = dmu_objset_open(osname, DMU_OST_ANY, DS_MODE_STANDARD, &os);
475	if (error) {
476		cmn_err(CE_WARN, "can't process intent log for %s", osname);
477		return (0);
478	}
479
480	zilog = dmu_objset_zil(os);
481	zh = zil_header_in_syncing_context(zilog);
482
483	/*
484	 * Claim all log blocks if we haven't already done so, and remember
485	 * the highest claimed sequence number.  This ensures that if we can
486	 * read only part of the log now (e.g. due to a missing device),
487	 * but we can read the entire log later, we will not try to replay
488	 * or destroy beyond the last block we successfully claimed.
489	 */
490	ASSERT3U(zh->zh_claim_txg, <=, first_txg);
491	if (zh->zh_claim_txg == 0 && !BP_IS_HOLE(&zh->zh_log)) {
492		zh->zh_claim_txg = first_txg;
493		zh->zh_claim_seq = zil_parse(zilog, zil_claim_log_block,
494		    zil_claim_log_record, tx, first_txg);
495		dsl_dataset_dirty(dmu_objset_ds(os), tx);
496	}
497
498	ASSERT3U(first_txg, ==, (spa_last_synced_txg(zilog->zl_spa) + 1));
499	dmu_objset_close(os);
500	return (0);
501}
502
503void
504zil_add_vdev(zilog_t *zilog, uint64_t vdev)
505{
506	zil_vdev_t *zv, *new;
507	uint64_t bmap_sz = sizeof (zilog->zl_vdev_bmap) << 3;
508	uchar_t *cp;
509
510	if (zfs_nocacheflush)
511		return;
512
513	if (vdev < bmap_sz) {
514		cp = zilog->zl_vdev_bmap + (vdev / 8);
515		atomic_or_8(cp, 1 << (vdev % 8));
516	} else  {
517		/*
518		 * insert into ordered list
519		 */
520		mutex_enter(&zilog->zl_lock);
521		for (zv = list_head(&zilog->zl_vdev_list); zv != NULL;
522		    zv = list_next(&zilog->zl_vdev_list, zv)) {
523			if (zv->vdev == vdev) {
524				/* duplicate found - just return */
525				mutex_exit(&zilog->zl_lock);
526				return;
527			}
528			if (zv->vdev > vdev) {
529				/* insert before this entry */
530				new = kmem_alloc(sizeof (zil_vdev_t),
531				    KM_SLEEP);
532				new->vdev = vdev;
533				list_insert_before(&zilog->zl_vdev_list,
534				    zv, new);
535				mutex_exit(&zilog->zl_lock);
536				return;
537			}
538		}
539		/* ran off end of list, insert at the end */
540		ASSERT(zv == NULL);
541		new = kmem_alloc(sizeof (zil_vdev_t), KM_SLEEP);
542		new->vdev = vdev;
543		list_insert_tail(&zilog->zl_vdev_list, new);
544		mutex_exit(&zilog->zl_lock);
545	}
546}
547
548/* start an async flush of the write cache for this vdev */
549void
550zil_flush_vdev(spa_t *spa, uint64_t vdev, zio_t **zio)
551{
552	vdev_t *vd;
553
554	if (*zio == NULL)
555		*zio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL);
556
557	vd = vdev_lookup_top(spa, vdev);
558	ASSERT(vd);
559
560	(void) zio_nowait(zio_ioctl(*zio, spa, vd, DKIOCFLUSHWRITECACHE,
561	    NULL, NULL, ZIO_PRIORITY_NOW,
562	    ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_RETRY));
563}
564
565void
566zil_flush_vdevs(zilog_t *zilog)
567{
568	zil_vdev_t *zv;
569	zio_t *zio = NULL;
570	spa_t *spa = zilog->zl_spa;
571	uint64_t vdev;
572	uint8_t b;
573	int i, j;
574
575	ASSERT(zilog->zl_writer);
576
577	for (i = 0; i < sizeof (zilog->zl_vdev_bmap); i++) {
578		b = zilog->zl_vdev_bmap[i];
579		if (b == 0)
580			continue;
581		for (j = 0; j < 8; j++) {
582			if (b & (1 << j)) {
583				vdev = (i << 3) + j;
584				zil_flush_vdev(spa, vdev, &zio);
585			}
586		}
587		zilog->zl_vdev_bmap[i] = 0;
588	}
589
590	while ((zv = list_head(&zilog->zl_vdev_list)) != NULL) {
591		zil_flush_vdev(spa, zv->vdev, &zio);
592		list_remove(&zilog->zl_vdev_list, zv);
593		kmem_free(zv, sizeof (zil_vdev_t));
594	}
595	/*
596	 * Wait for all the flushes to complete.  Not all devices actually
597	 * support the DKIOCFLUSHWRITECACHE ioctl, so it's OK if it fails.
598	 */
599	if (zio)
600		(void) zio_wait(zio);
601}
602
603/*
604 * Function called when a log block write completes
605 */
606static void
607zil_lwb_write_done(zio_t *zio)
608{
609	lwb_t *lwb = zio->io_private;
610	zilog_t *zilog = lwb->lwb_zilog;
611
612	/*
613	 * Now that we've written this log block, we have a stable pointer
614	 * to the next block in the chain, so it's OK to let the txg in
615	 * which we allocated the next block sync.
616	 */
617	txg_rele_to_sync(&lwb->lwb_txgh);
618
619	zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
620	mutex_enter(&zilog->zl_lock);
621	lwb->lwb_buf = NULL;
622	if (zio->io_error) {
623		zilog->zl_log_error = B_TRUE;
624		mutex_exit(&zilog->zl_lock);
625		return;
626	}
627	mutex_exit(&zilog->zl_lock);
628}
629
630/*
631 * Initialize the io for a log block.
632 *
633 * Note, we should not initialize the IO until we are about
634 * to use it, since zio_rewrite() does a spa_config_enter().
635 */
636static void
637zil_lwb_write_init(zilog_t *zilog, lwb_t *lwb)
638{
639	zbookmark_t zb;
640
641	zb.zb_objset = lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_OBJSET];
642	zb.zb_object = 0;
643	zb.zb_level = -1;
644	zb.zb_blkid = lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_SEQ];
645
646	if (zilog->zl_root_zio == NULL) {
647		zilog->zl_root_zio = zio_root(zilog->zl_spa, NULL, NULL,
648		    ZIO_FLAG_CANFAIL);
649	}
650	if (lwb->lwb_zio == NULL) {
651		lwb->lwb_zio = zio_rewrite(zilog->zl_root_zio, zilog->zl_spa,
652		    ZIO_CHECKSUM_ZILOG, 0, &lwb->lwb_blk, lwb->lwb_buf,
653		    lwb->lwb_sz, zil_lwb_write_done, lwb,
654		    ZIO_PRIORITY_LOG_WRITE, ZIO_FLAG_MUSTSUCCEED, &zb);
655	}
656}
657
658/*
659 * Start a log block write and advance to the next log block.
660 * Calls are serialized.
661 */
662static lwb_t *
663zil_lwb_write_start(zilog_t *zilog, lwb_t *lwb)
664{
665	lwb_t *nlwb;
666	zil_trailer_t *ztp = (zil_trailer_t *)(lwb->lwb_buf + lwb->lwb_sz) - 1;
667	spa_t *spa = zilog->zl_spa;
668	blkptr_t *bp = &ztp->zit_next_blk;
669	uint64_t txg;
670	uint64_t zil_blksz;
671	int error;
672
673	ASSERT(lwb->lwb_nused <= ZIL_BLK_DATA_SZ(lwb));
674
675	/*
676	 * Allocate the next block and save its address in this block
677	 * before writing it in order to establish the log chain.
678	 * Note that if the allocation of nlwb synced before we wrote
679	 * the block that points at it (lwb), we'd leak it if we crashed.
680	 * Therefore, we don't do txg_rele_to_sync() until zil_lwb_write_done().
681	 */
682	txg = txg_hold_open(zilog->zl_dmu_pool, &lwb->lwb_txgh);
683	txg_rele_to_quiesce(&lwb->lwb_txgh);
684
685	/*
686	 * Pick a ZIL blocksize. We request a size that is the
687	 * maximum of the previous used size, the current used size and
688	 * the amount waiting in the queue.
689	 */
690	zil_blksz = MAX(zilog->zl_prev_used,
691	    zilog->zl_cur_used + sizeof (*ztp));
692	zil_blksz = MAX(zil_blksz, zilog->zl_itx_list_sz + sizeof (*ztp));
693	zil_blksz = P2ROUNDUP_TYPED(zil_blksz, ZIL_MIN_BLKSZ, uint64_t);
694	if (zil_blksz > ZIL_MAX_BLKSZ)
695		zil_blksz = ZIL_MAX_BLKSZ;
696
697	BP_ZERO(bp);
698	/* pass the old blkptr in order to spread log blocks across devs */
699	error = zio_alloc_blk(spa, zil_blksz, bp, &lwb->lwb_blk, txg);
700	if (error) {
701		dmu_tx_t *tx = dmu_tx_create_assigned(zilog->zl_dmu_pool, txg);
702
703		/*
704		 * We dirty the dataset to ensure that zil_sync() will
705		 * be called to remove this lwb from our zl_lwb_list.
706		 * Failing to do so, may leave an lwb with a NULL lwb_buf
707		 * hanging around on the zl_lwb_list.
708		 */
709		dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
710		dmu_tx_commit(tx);
711
712		/*
713		 * Since we've just experienced an allocation failure so we
714		 * terminate the current lwb and send it on its way.
715		 */
716		ztp->zit_pad = 0;
717		ztp->zit_nused = lwb->lwb_nused;
718		ztp->zit_bt.zbt_cksum = lwb->lwb_blk.blk_cksum;
719		zio_nowait(lwb->lwb_zio);
720
721		/*
722		 * By returning NULL the caller will call tx_wait_synced()
723		 */
724		return (NULL);
725	}
726
727	ASSERT3U(bp->blk_birth, ==, txg);
728	ztp->zit_pad = 0;
729	ztp->zit_nused = lwb->lwb_nused;
730	ztp->zit_bt.zbt_cksum = lwb->lwb_blk.blk_cksum;
731	bp->blk_cksum = lwb->lwb_blk.blk_cksum;
732	bp->blk_cksum.zc_word[ZIL_ZC_SEQ]++;
733
734	/*
735	 * Allocate a new log write buffer (lwb).
736	 */
737	nlwb = kmem_cache_alloc(zil_lwb_cache, KM_SLEEP);
738
739	nlwb->lwb_zilog = zilog;
740	nlwb->lwb_blk = *bp;
741	nlwb->lwb_nused = 0;
742	nlwb->lwb_sz = BP_GET_LSIZE(&nlwb->lwb_blk);
743	nlwb->lwb_buf = zio_buf_alloc(nlwb->lwb_sz);
744	nlwb->lwb_max_txg = txg;
745	nlwb->lwb_zio = NULL;
746
747	/*
748	 * Put new lwb at the end of the log chain
749	 */
750	mutex_enter(&zilog->zl_lock);
751	list_insert_tail(&zilog->zl_lwb_list, nlwb);
752	mutex_exit(&zilog->zl_lock);
753
754	/* Record the vdev for later flushing */
755	zil_add_vdev(zilog, DVA_GET_VDEV(BP_IDENTITY(&(lwb->lwb_blk))));
756
757	/*
758	 * kick off the write for the old log block
759	 */
760	dprintf_bp(&lwb->lwb_blk, "lwb %p txg %llu: ", lwb, txg);
761	ASSERT(lwb->lwb_zio);
762	zio_nowait(lwb->lwb_zio);
763
764	return (nlwb);
765}
766
767static lwb_t *
768zil_lwb_commit(zilog_t *zilog, itx_t *itx, lwb_t *lwb)
769{
770	lr_t *lrc = &itx->itx_lr; /* common log record */
771	lr_write_t *lr = (lr_write_t *)lrc;
772	uint64_t txg = lrc->lrc_txg;
773	uint64_t reclen = lrc->lrc_reclen;
774	uint64_t dlen;
775
776	if (lwb == NULL)
777		return (NULL);
778	ASSERT(lwb->lwb_buf != NULL);
779
780	if (lrc->lrc_txtype == TX_WRITE && itx->itx_wr_state == WR_NEED_COPY)
781		dlen = P2ROUNDUP_TYPED(
782		    lr->lr_length, sizeof (uint64_t), uint64_t);
783	else
784		dlen = 0;
785
786	zilog->zl_cur_used += (reclen + dlen);
787
788	zil_lwb_write_init(zilog, lwb);
789
790	/*
791	 * If this record won't fit in the current log block, start a new one.
792	 */
793	if (lwb->lwb_nused + reclen + dlen > ZIL_BLK_DATA_SZ(lwb)) {
794		lwb = zil_lwb_write_start(zilog, lwb);
795		if (lwb == NULL)
796			return (NULL);
797		zil_lwb_write_init(zilog, lwb);
798		ASSERT(lwb->lwb_nused == 0);
799		if (reclen + dlen > ZIL_BLK_DATA_SZ(lwb)) {
800			txg_wait_synced(zilog->zl_dmu_pool, txg);
801			return (lwb);
802		}
803	}
804
805	/*
806	 * Update the lrc_seq, to be log record sequence number. See zil.h
807	 * Then copy the record to the log buffer.
808	 */
809	lrc->lrc_seq = ++zilog->zl_lr_seq; /* we are single threaded */
810	bcopy(lrc, lwb->lwb_buf + lwb->lwb_nused, reclen);
811
812	/*
813	 * If it's a write, fetch the data or get its blkptr as appropriate.
814	 */
815	if (lrc->lrc_txtype == TX_WRITE) {
816		if (txg > spa_freeze_txg(zilog->zl_spa))
817			txg_wait_synced(zilog->zl_dmu_pool, txg);
818		if (itx->itx_wr_state != WR_COPIED) {
819			char *dbuf;
820			int error;
821
822			/* alignment is guaranteed */
823			lr = (lr_write_t *)(lwb->lwb_buf + lwb->lwb_nused);
824			if (dlen) {
825				ASSERT(itx->itx_wr_state == WR_NEED_COPY);
826				dbuf = lwb->lwb_buf + lwb->lwb_nused + reclen;
827				lr->lr_common.lrc_reclen += dlen;
828			} else {
829				ASSERT(itx->itx_wr_state == WR_INDIRECT);
830				dbuf = NULL;
831			}
832			error = zilog->zl_get_data(
833			    itx->itx_private, lr, dbuf, lwb->lwb_zio);
834			if (error) {
835				ASSERT(error == ENOENT || error == EEXIST ||
836				    error == EALREADY);
837				return (lwb);
838			}
839		}
840	}
841
842	lwb->lwb_nused += reclen + dlen;
843	lwb->lwb_max_txg = MAX(lwb->lwb_max_txg, txg);
844	ASSERT3U(lwb->lwb_nused, <=, ZIL_BLK_DATA_SZ(lwb));
845	ASSERT3U(P2PHASE(lwb->lwb_nused, sizeof (uint64_t)), ==, 0);
846
847	return (lwb);
848}
849
850itx_t *
851zil_itx_create(int txtype, size_t lrsize)
852{
853	itx_t *itx;
854
855	lrsize = P2ROUNDUP_TYPED(lrsize, sizeof (uint64_t), size_t);
856
857	itx = kmem_alloc(offsetof(itx_t, itx_lr) + lrsize, KM_SLEEP);
858	itx->itx_lr.lrc_txtype = txtype;
859	itx->itx_lr.lrc_reclen = lrsize;
860	itx->itx_lr.lrc_seq = 0;	/* defensive */
861
862	return (itx);
863}
864
865uint64_t
866zil_itx_assign(zilog_t *zilog, itx_t *itx, dmu_tx_t *tx)
867{
868	uint64_t seq;
869
870	ASSERT(itx->itx_lr.lrc_seq == 0);
871
872	mutex_enter(&zilog->zl_lock);
873	list_insert_tail(&zilog->zl_itx_list, itx);
874	zilog->zl_itx_list_sz += itx->itx_lr.lrc_reclen;
875	itx->itx_lr.lrc_txg = dmu_tx_get_txg(tx);
876	itx->itx_lr.lrc_seq = seq = ++zilog->zl_itx_seq;
877	mutex_exit(&zilog->zl_lock);
878
879	return (seq);
880}
881
882/*
883 * Free up all in-memory intent log transactions that have now been synced.
884 */
885static void
886zil_itx_clean(zilog_t *zilog)
887{
888	uint64_t synced_txg = spa_last_synced_txg(zilog->zl_spa);
889	uint64_t freeze_txg = spa_freeze_txg(zilog->zl_spa);
890	list_t clean_list;
891	itx_t *itx;
892
893	list_create(&clean_list, sizeof (itx_t), offsetof(itx_t, itx_node));
894
895	mutex_enter(&zilog->zl_lock);
896	/* wait for a log writer to finish walking list */
897	while (zilog->zl_writer) {
898		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
899	}
900
901	/*
902	 * Move the sync'd log transactions to a separate list so we can call
903	 * kmem_free without holding the zl_lock.
904	 *
905	 * There is no need to set zl_writer as we don't drop zl_lock here
906	 */
907	while ((itx = list_head(&zilog->zl_itx_list)) != NULL &&
908	    itx->itx_lr.lrc_txg <= MIN(synced_txg, freeze_txg)) {
909		list_remove(&zilog->zl_itx_list, itx);
910		zilog->zl_itx_list_sz -= itx->itx_lr.lrc_reclen;
911		list_insert_tail(&clean_list, itx);
912	}
913	cv_broadcast(&zilog->zl_cv_writer);
914	mutex_exit(&zilog->zl_lock);
915
916	/* destroy sync'd log transactions */
917	while ((itx = list_head(&clean_list)) != NULL) {
918		list_remove(&clean_list, itx);
919		kmem_free(itx, offsetof(itx_t, itx_lr)
920		    + itx->itx_lr.lrc_reclen);
921	}
922	list_destroy(&clean_list);
923}
924
925/*
926 * If there are any in-memory intent log transactions which have now been
927 * synced then start up a taskq to free them.
928 */
929void
930zil_clean(zilog_t *zilog)
931{
932	itx_t *itx;
933
934	mutex_enter(&zilog->zl_lock);
935	itx = list_head(&zilog->zl_itx_list);
936	if ((itx != NULL) &&
937	    (itx->itx_lr.lrc_txg <= spa_last_synced_txg(zilog->zl_spa))) {
938		(void) taskq_dispatch(zilog->zl_clean_taskq,
939		    (void (*)(void *))zil_itx_clean, zilog, TQ_NOSLEEP);
940	}
941	mutex_exit(&zilog->zl_lock);
942}
943
944void
945zil_commit_writer(zilog_t *zilog, uint64_t seq, uint64_t foid)
946{
947	uint64_t txg;
948	uint64_t reclen;
949	uint64_t commit_seq = 0;
950	itx_t *itx, *itx_next = (itx_t *)-1;
951	lwb_t *lwb;
952	spa_t *spa;
953
954	zilog->zl_writer = B_TRUE;
955	zilog->zl_root_zio = NULL;
956	spa = zilog->zl_spa;
957
958	if (zilog->zl_suspend) {
959		lwb = NULL;
960	} else {
961		lwb = list_tail(&zilog->zl_lwb_list);
962		if (lwb == NULL) {
963			/*
964			 * Return if there's nothing to flush before we
965			 * dirty the fs by calling zil_create()
966			 */
967			if (list_is_empty(&zilog->zl_itx_list)) {
968				zilog->zl_writer = B_FALSE;
969				return;
970			}
971			mutex_exit(&zilog->zl_lock);
972			zil_create(zilog);
973			mutex_enter(&zilog->zl_lock);
974			lwb = list_tail(&zilog->zl_lwb_list);
975		}
976	}
977
978	/* Loop through in-memory log transactions filling log blocks. */
979	DTRACE_PROBE1(zil__cw1, zilog_t *, zilog);
980	for (;;) {
981		/*
982		 * Find the next itx to push:
983		 * Push all transactions related to specified foid and all
984		 * other transactions except TX_WRITE, TX_TRUNCATE,
985		 * TX_SETATTR and TX_ACL for all other files.
986		 */
987		if (itx_next != (itx_t *)-1)
988			itx = itx_next;
989		else
990			itx = list_head(&zilog->zl_itx_list);
991		for (; itx != NULL; itx = list_next(&zilog->zl_itx_list, itx)) {
992			if (foid == 0) /* push all foids? */
993				break;
994			if (itx->itx_sync) /* push all O_[D]SYNC */
995				break;
996			switch (itx->itx_lr.lrc_txtype) {
997			case TX_SETATTR:
998			case TX_WRITE:
999			case TX_TRUNCATE:
1000			case TX_ACL:
1001				/* lr_foid is same offset for these records */
1002				if (((lr_write_t *)&itx->itx_lr)->lr_foid
1003				    != foid) {
1004					continue; /* skip this record */
1005				}
1006			}
1007			break;
1008		}
1009		if (itx == NULL)
1010			break;
1011
1012		reclen = itx->itx_lr.lrc_reclen;
1013		if ((itx->itx_lr.lrc_seq > seq) &&
1014		    ((lwb == NULL) || (lwb->lwb_nused == 0) ||
1015		    (lwb->lwb_nused + reclen > ZIL_BLK_DATA_SZ(lwb)))) {
1016			break;
1017		}
1018
1019		/*
1020		 * Save the next pointer.  Even though we soon drop
1021		 * zl_lock all threads that may change the list
1022		 * (another writer or zil_itx_clean) can't do so until
1023		 * they have zl_writer.
1024		 */
1025		itx_next = list_next(&zilog->zl_itx_list, itx);
1026		list_remove(&zilog->zl_itx_list, itx);
1027		mutex_exit(&zilog->zl_lock);
1028		txg = itx->itx_lr.lrc_txg;
1029		ASSERT(txg);
1030
1031		if (txg > spa_last_synced_txg(spa) ||
1032		    txg > spa_freeze_txg(spa))
1033			lwb = zil_lwb_commit(zilog, itx, lwb);
1034		kmem_free(itx, offsetof(itx_t, itx_lr)
1035		    + itx->itx_lr.lrc_reclen);
1036		mutex_enter(&zilog->zl_lock);
1037		zilog->zl_itx_list_sz -= reclen;
1038	}
1039	DTRACE_PROBE1(zil__cw2, zilog_t *, zilog);
1040	/* determine commit sequence number */
1041	itx = list_head(&zilog->zl_itx_list);
1042	if (itx)
1043		commit_seq = itx->itx_lr.lrc_seq;
1044	else
1045		commit_seq = zilog->zl_itx_seq;
1046	mutex_exit(&zilog->zl_lock);
1047
1048	/* write the last block out */
1049	if (lwb != NULL && lwb->lwb_zio != NULL)
1050		lwb = zil_lwb_write_start(zilog, lwb);
1051
1052	zilog->zl_prev_used = zilog->zl_cur_used;
1053	zilog->zl_cur_used = 0;
1054
1055	/*
1056	 * Wait if necessary for the log blocks to be on stable storage.
1057	 */
1058	if (zilog->zl_root_zio) {
1059		DTRACE_PROBE1(zil__cw3, zilog_t *, zilog);
1060		(void) zio_wait(zilog->zl_root_zio);
1061		DTRACE_PROBE1(zil__cw4, zilog_t *, zilog);
1062		if (!zfs_nocacheflush)
1063			zil_flush_vdevs(zilog);
1064	}
1065
1066	if (zilog->zl_log_error || lwb == NULL) {
1067		zilog->zl_log_error = 0;
1068		txg_wait_synced(zilog->zl_dmu_pool, 0);
1069	}
1070
1071	mutex_enter(&zilog->zl_lock);
1072	zilog->zl_writer = B_FALSE;
1073
1074	ASSERT3U(commit_seq, >=, zilog->zl_commit_seq);
1075	zilog->zl_commit_seq = commit_seq;
1076}
1077
1078/*
1079 * Push zfs transactions to stable storage up to the supplied sequence number.
1080 * If foid is 0 push out all transactions, otherwise push only those
1081 * for that file or might have been used to create that file.
1082 */
1083void
1084zil_commit(zilog_t *zilog, uint64_t seq, uint64_t foid)
1085{
1086	if (zilog == NULL || seq == 0)
1087		return;
1088
1089	mutex_enter(&zilog->zl_lock);
1090
1091	seq = MIN(seq, zilog->zl_itx_seq);	/* cap seq at largest itx seq */
1092
1093	while (zilog->zl_writer) {
1094		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1095		if (seq < zilog->zl_commit_seq) {
1096			mutex_exit(&zilog->zl_lock);
1097			return;
1098		}
1099	}
1100	zil_commit_writer(zilog, seq, foid); /* drops zl_lock */
1101	/* wake up others waiting on the commit */
1102	cv_broadcast(&zilog->zl_cv_writer);
1103	mutex_exit(&zilog->zl_lock);
1104}
1105
1106/*
1107 * Called in syncing context to free committed log blocks and update log header.
1108 */
1109void
1110zil_sync(zilog_t *zilog, dmu_tx_t *tx)
1111{
1112	zil_header_t *zh = zil_header_in_syncing_context(zilog);
1113	uint64_t txg = dmu_tx_get_txg(tx);
1114	spa_t *spa = zilog->zl_spa;
1115	lwb_t *lwb;
1116
1117	mutex_enter(&zilog->zl_lock);
1118
1119	ASSERT(zilog->zl_stop_sync == 0);
1120
1121	zh->zh_replay_seq = zilog->zl_replay_seq[txg & TXG_MASK];
1122
1123	if (zilog->zl_destroy_txg == txg) {
1124		blkptr_t blk = zh->zh_log;
1125
1126		ASSERT(list_head(&zilog->zl_lwb_list) == NULL);
1127		ASSERT(spa_sync_pass(spa) == 1);
1128
1129		bzero(zh, sizeof (zil_header_t));
1130		bzero(zilog->zl_replay_seq, sizeof (zilog->zl_replay_seq));
1131
1132		if (zilog->zl_keep_first) {
1133			/*
1134			 * If this block was part of log chain that couldn't
1135			 * be claimed because a device was missing during
1136			 * zil_claim(), but that device later returns,
1137			 * then this block could erroneously appear valid.
1138			 * To guard against this, assign a new GUID to the new
1139			 * log chain so it doesn't matter what blk points to.
1140			 */
1141			zil_init_log_chain(zilog, &blk);
1142			zh->zh_log = blk;
1143		}
1144	}
1145
1146	for (;;) {
1147		lwb = list_head(&zilog->zl_lwb_list);
1148		if (lwb == NULL) {
1149			mutex_exit(&zilog->zl_lock);
1150			return;
1151		}
1152		zh->zh_log = lwb->lwb_blk;
1153		if (lwb->lwb_buf != NULL || lwb->lwb_max_txg > txg)
1154			break;
1155		list_remove(&zilog->zl_lwb_list, lwb);
1156		zio_free_blk(spa, &lwb->lwb_blk, txg);
1157		kmem_cache_free(zil_lwb_cache, lwb);
1158
1159		/*
1160		 * If we don't have anything left in the lwb list then
1161		 * we've had an allocation failure and we need to zero
1162		 * out the zil_header blkptr so that we don't end
1163		 * up freeing the same block twice.
1164		 */
1165		if (list_head(&zilog->zl_lwb_list) == NULL)
1166			BP_ZERO(&zh->zh_log);
1167	}
1168	mutex_exit(&zilog->zl_lock);
1169}
1170
1171void
1172zil_init(void)
1173{
1174	zil_lwb_cache = kmem_cache_create("zil_lwb_cache",
1175	    sizeof (struct lwb), 0, NULL, NULL, NULL, NULL, NULL, 0);
1176}
1177
1178void
1179zil_fini(void)
1180{
1181	kmem_cache_destroy(zil_lwb_cache);
1182}
1183
1184zilog_t *
1185zil_alloc(objset_t *os, zil_header_t *zh_phys)
1186{
1187	zilog_t *zilog;
1188
1189	zilog = kmem_zalloc(sizeof (zilog_t), KM_SLEEP);
1190
1191	zilog->zl_header = zh_phys;
1192	zilog->zl_os = os;
1193	zilog->zl_spa = dmu_objset_spa(os);
1194	zilog->zl_dmu_pool = dmu_objset_pool(os);
1195	zilog->zl_destroy_txg = TXG_INITIAL - 1;
1196
1197	mutex_init(&zilog->zl_lock, NULL, MUTEX_DEFAULT, NULL);
1198	cv_init(&zilog->zl_cv_writer, NULL, CV_DEFAULT, NULL);
1199	cv_init(&zilog->zl_cv_suspend, NULL, CV_DEFAULT, NULL);
1200
1201	list_create(&zilog->zl_itx_list, sizeof (itx_t),
1202	    offsetof(itx_t, itx_node));
1203
1204	list_create(&zilog->zl_lwb_list, sizeof (lwb_t),
1205	    offsetof(lwb_t, lwb_node));
1206
1207	list_create(&zilog->zl_vdev_list, sizeof (zil_vdev_t),
1208	    offsetof(zil_vdev_t, vdev_seq_node));
1209
1210	return (zilog);
1211}
1212
1213void
1214zil_free(zilog_t *zilog)
1215{
1216	lwb_t *lwb;
1217	zil_vdev_t *zv;
1218
1219	zilog->zl_stop_sync = 1;
1220
1221	while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
1222		list_remove(&zilog->zl_lwb_list, lwb);
1223		if (lwb->lwb_buf != NULL)
1224			zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
1225		kmem_cache_free(zil_lwb_cache, lwb);
1226	}
1227	list_destroy(&zilog->zl_lwb_list);
1228
1229	while ((zv = list_head(&zilog->zl_vdev_list)) != NULL) {
1230		list_remove(&zilog->zl_vdev_list, zv);
1231		kmem_free(zv, sizeof (zil_vdev_t));
1232	}
1233	list_destroy(&zilog->zl_vdev_list);
1234
1235	ASSERT(list_head(&zilog->zl_itx_list) == NULL);
1236	list_destroy(&zilog->zl_itx_list);
1237	cv_destroy(&zilog->zl_cv_suspend);
1238	cv_destroy(&zilog->zl_cv_writer);
1239	mutex_destroy(&zilog->zl_lock);
1240
1241	kmem_free(zilog, sizeof (zilog_t));
1242}
1243
1244/*
1245 * return true if the initial log block is not valid
1246 */
1247static int
1248zil_empty(zilog_t *zilog)
1249{
1250	const zil_header_t *zh = zilog->zl_header;
1251	arc_buf_t *abuf = NULL;
1252
1253	if (BP_IS_HOLE(&zh->zh_log))
1254		return (1);
1255
1256	if (zil_read_log_block(zilog, &zh->zh_log, &abuf) != 0)
1257		return (1);
1258
1259	VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
1260	return (0);
1261}
1262
1263/*
1264 * Open an intent log.
1265 */
1266zilog_t *
1267zil_open(objset_t *os, zil_get_data_t *get_data)
1268{
1269	zilog_t *zilog = dmu_objset_zil(os);
1270
1271	zilog->zl_get_data = get_data;
1272	zilog->zl_clean_taskq = taskq_create("zil_clean", 1, minclsyspri,
1273	    2, 2, TASKQ_PREPOPULATE);
1274
1275	return (zilog);
1276}
1277
1278/*
1279 * Close an intent log.
1280 */
1281void
1282zil_close(zilog_t *zilog)
1283{
1284	/*
1285	 * If the log isn't already committed, mark the objset dirty
1286	 * (so zil_sync() will be called) and wait for that txg to sync.
1287	 */
1288	if (!zil_is_committed(zilog)) {
1289		uint64_t txg;
1290		dmu_tx_t *tx = dmu_tx_create(zilog->zl_os);
1291		(void) dmu_tx_assign(tx, TXG_WAIT);
1292		dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
1293		txg = dmu_tx_get_txg(tx);
1294		dmu_tx_commit(tx);
1295		txg_wait_synced(zilog->zl_dmu_pool, txg);
1296	}
1297
1298	taskq_destroy(zilog->zl_clean_taskq);
1299	zilog->zl_clean_taskq = NULL;
1300	zilog->zl_get_data = NULL;
1301
1302	zil_itx_clean(zilog);
1303	ASSERT(list_head(&zilog->zl_itx_list) == NULL);
1304}
1305
1306/*
1307 * Suspend an intent log.  While in suspended mode, we still honor
1308 * synchronous semantics, but we rely on txg_wait_synced() to do it.
1309 * We suspend the log briefly when taking a snapshot so that the snapshot
1310 * contains all the data it's supposed to, and has an empty intent log.
1311 */
1312int
1313zil_suspend(zilog_t *zilog)
1314{
1315	const zil_header_t *zh = zilog->zl_header;
1316
1317	mutex_enter(&zilog->zl_lock);
1318	if (zh->zh_claim_txg != 0) {		/* unplayed log */
1319		mutex_exit(&zilog->zl_lock);
1320		return (EBUSY);
1321	}
1322	if (zilog->zl_suspend++ != 0) {
1323		/*
1324		 * Someone else already began a suspend.
1325		 * Just wait for them to finish.
1326		 */
1327		while (zilog->zl_suspending)
1328			cv_wait(&zilog->zl_cv_suspend, &zilog->zl_lock);
1329		ASSERT(BP_IS_HOLE(&zh->zh_log));
1330		mutex_exit(&zilog->zl_lock);
1331		return (0);
1332	}
1333	zilog->zl_suspending = B_TRUE;
1334	mutex_exit(&zilog->zl_lock);
1335
1336	zil_commit(zilog, UINT64_MAX, 0);
1337
1338	/*
1339	 * Wait for any in-flight log writes to complete.
1340	 */
1341	mutex_enter(&zilog->zl_lock);
1342	while (zilog->zl_writer)
1343		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1344	mutex_exit(&zilog->zl_lock);
1345
1346	zil_destroy(zilog, B_FALSE);
1347
1348	mutex_enter(&zilog->zl_lock);
1349	ASSERT(BP_IS_HOLE(&zh->zh_log));
1350	zilog->zl_suspending = B_FALSE;
1351	cv_broadcast(&zilog->zl_cv_suspend);
1352	mutex_exit(&zilog->zl_lock);
1353
1354	return (0);
1355}
1356
1357void
1358zil_resume(zilog_t *zilog)
1359{
1360	mutex_enter(&zilog->zl_lock);
1361	ASSERT(zilog->zl_suspend != 0);
1362	zilog->zl_suspend--;
1363	mutex_exit(&zilog->zl_lock);
1364}
1365
1366typedef struct zil_replay_arg {
1367	objset_t	*zr_os;
1368	zil_replay_func_t **zr_replay;
1369	void		*zr_arg;
1370	uint64_t	*zr_txgp;
1371	boolean_t	zr_byteswap;
1372	char		*zr_lrbuf;
1373} zil_replay_arg_t;
1374
1375static void
1376zil_replay_log_record(zilog_t *zilog, lr_t *lr, void *zra, uint64_t claim_txg)
1377{
1378	zil_replay_arg_t *zr = zra;
1379	const zil_header_t *zh = zilog->zl_header;
1380	uint64_t reclen = lr->lrc_reclen;
1381	uint64_t txtype = lr->lrc_txtype;
1382	char *name;
1383	int pass, error, sunk;
1384
1385	if (zilog->zl_stop_replay)
1386		return;
1387
1388	if (lr->lrc_txg < claim_txg)		/* already committed */
1389		return;
1390
1391	if (lr->lrc_seq <= zh->zh_replay_seq)	/* already replayed */
1392		return;
1393
1394	/*
1395	 * Make a copy of the data so we can revise and extend it.
1396	 */
1397	bcopy(lr, zr->zr_lrbuf, reclen);
1398
1399	/*
1400	 * The log block containing this lr may have been byteswapped
1401	 * so that we can easily examine common fields like lrc_txtype.
1402	 * However, the log is a mix of different data types, and only the
1403	 * replay vectors know how to byteswap their records.  Therefore, if
1404	 * the lr was byteswapped, undo it before invoking the replay vector.
1405	 */
1406	if (zr->zr_byteswap)
1407		byteswap_uint64_array(zr->zr_lrbuf, reclen);
1408
1409	/*
1410	 * If this is a TX_WRITE with a blkptr, suck in the data.
1411	 */
1412	if (txtype == TX_WRITE && reclen == sizeof (lr_write_t)) {
1413		lr_write_t *lrw = (lr_write_t *)lr;
1414		blkptr_t *wbp = &lrw->lr_blkptr;
1415		uint64_t wlen = lrw->lr_length;
1416		char *wbuf = zr->zr_lrbuf + reclen;
1417
1418		if (BP_IS_HOLE(wbp)) {	/* compressed to a hole */
1419			bzero(wbuf, wlen);
1420		} else {
1421			/*
1422			 * A subsequent write may have overwritten this block,
1423			 * in which case wbp may have been been freed and
1424			 * reallocated, and our read of wbp may fail with a
1425			 * checksum error.  We can safely ignore this because
1426			 * the later write will provide the correct data.
1427			 */
1428			zbookmark_t zb;
1429
1430			zb.zb_objset = dmu_objset_id(zilog->zl_os);
1431			zb.zb_object = lrw->lr_foid;
1432			zb.zb_level = -1;
1433			zb.zb_blkid = lrw->lr_offset / BP_GET_LSIZE(wbp);
1434
1435			(void) zio_wait(zio_read(NULL, zilog->zl_spa,
1436			    wbp, wbuf, BP_GET_LSIZE(wbp), NULL, NULL,
1437			    ZIO_PRIORITY_SYNC_READ,
1438			    ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE, &zb));
1439			(void) memmove(wbuf, wbuf + lrw->lr_blkoff, wlen);
1440		}
1441	}
1442
1443	/*
1444	 * We must now do two things atomically: replay this log record,
1445	 * and update the log header to reflect the fact that we did so.
1446	 * We use the DMU's ability to assign into a specific txg to do this.
1447	 */
1448	for (pass = 1, sunk = B_FALSE; /* CONSTANTCONDITION */; pass++) {
1449		uint64_t replay_txg;
1450		dmu_tx_t *replay_tx;
1451
1452		replay_tx = dmu_tx_create(zr->zr_os);
1453		error = dmu_tx_assign(replay_tx, TXG_WAIT);
1454		if (error) {
1455			dmu_tx_abort(replay_tx);
1456			break;
1457		}
1458
1459		replay_txg = dmu_tx_get_txg(replay_tx);
1460
1461		if (txtype == 0 || txtype >= TX_MAX_TYPE) {
1462			error = EINVAL;
1463		} else {
1464			/*
1465			 * On the first pass, arrange for the replay vector
1466			 * to fail its dmu_tx_assign().  That's the only way
1467			 * to ensure that those code paths remain well tested.
1468			 */
1469			*zr->zr_txgp = replay_txg - (pass == 1);
1470			error = zr->zr_replay[txtype](zr->zr_arg, zr->zr_lrbuf,
1471			    zr->zr_byteswap);
1472			*zr->zr_txgp = TXG_NOWAIT;
1473		}
1474
1475		if (error == 0) {
1476			dsl_dataset_dirty(dmu_objset_ds(zr->zr_os), replay_tx);
1477			zilog->zl_replay_seq[replay_txg & TXG_MASK] =
1478			    lr->lrc_seq;
1479		}
1480
1481		dmu_tx_commit(replay_tx);
1482
1483		if (!error)
1484			return;
1485
1486		/*
1487		 * The DMU's dnode layer doesn't see removes until the txg
1488		 * commits, so a subsequent claim can spuriously fail with
1489		 * EEXIST. So if we receive any error other than ERESTART
1490		 * we try syncing out any removes then retrying the
1491		 * transaction.
1492		 */
1493		if (error != ERESTART && !sunk) {
1494			txg_wait_synced(spa_get_dsl(zilog->zl_spa), 0);
1495			sunk = B_TRUE;
1496			continue; /* retry */
1497		}
1498
1499		if (error != ERESTART)
1500			break;
1501
1502		if (pass != 1)
1503			txg_wait_open(spa_get_dsl(zilog->zl_spa),
1504			    replay_txg + 1);
1505
1506		dprintf("pass %d, retrying\n", pass);
1507	}
1508
1509	ASSERT(error && error != ERESTART);
1510	name = kmem_alloc(MAXNAMELEN, KM_SLEEP);
1511	dmu_objset_name(zr->zr_os, name);
1512	cmn_err(CE_WARN, "ZFS replay transaction error %d, "
1513	    "dataset %s, seq 0x%llx, txtype %llu\n",
1514	    error, name, (u_longlong_t)lr->lrc_seq, (u_longlong_t)txtype);
1515	zilog->zl_stop_replay = 1;
1516	kmem_free(name, MAXNAMELEN);
1517}
1518
1519/* ARGSUSED */
1520static void
1521zil_incr_blks(zilog_t *zilog, blkptr_t *bp, void *arg, uint64_t claim_txg)
1522{
1523	zilog->zl_replay_blks++;
1524}
1525
1526/*
1527 * If this dataset has a non-empty intent log, replay it and destroy it.
1528 */
1529void
1530zil_replay(objset_t *os, void *arg, uint64_t *txgp,
1531	zil_replay_func_t *replay_func[TX_MAX_TYPE])
1532{
1533	zilog_t *zilog = dmu_objset_zil(os);
1534	const zil_header_t *zh = zilog->zl_header;
1535	zil_replay_arg_t zr;
1536
1537	if (zil_empty(zilog)) {
1538		zil_destroy(zilog, B_TRUE);
1539		return;
1540	}
1541	//printf("ZFS: Replaying ZIL on %s...\n", os->os->os_spa->spa_name);
1542
1543	zr.zr_os = os;
1544	zr.zr_replay = replay_func;
1545	zr.zr_arg = arg;
1546	zr.zr_txgp = txgp;
1547	zr.zr_byteswap = BP_SHOULD_BYTESWAP(&zh->zh_log);
1548	zr.zr_lrbuf = kmem_alloc(2 * SPA_MAXBLOCKSIZE, KM_SLEEP);
1549
1550	/*
1551	 * Wait for in-progress removes to sync before starting replay.
1552	 */
1553	txg_wait_synced(zilog->zl_dmu_pool, 0);
1554
1555	zilog->zl_stop_replay = 0;
1556	zilog->zl_replay_time = lbolt;
1557	ASSERT(zilog->zl_replay_blks == 0);
1558	(void) zil_parse(zilog, zil_incr_blks, zil_replay_log_record, &zr,
1559	    zh->zh_claim_txg);
1560	kmem_free(zr.zr_lrbuf, 2 * SPA_MAXBLOCKSIZE);
1561
1562	zil_destroy(zilog, B_FALSE);
1563	//printf("ZFS: Replay of ZIL on %s finished.\n", os->os->os_spa->spa_name);
1564}
1565
1566/*
1567 * Report whether all transactions are committed
1568 */
1569int
1570zil_is_committed(zilog_t *zilog)
1571{
1572	lwb_t *lwb;
1573	int ret;
1574
1575	mutex_enter(&zilog->zl_lock);
1576	while (zilog->zl_writer)
1577		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1578
1579	/* recent unpushed intent log transactions? */
1580	if (!list_is_empty(&zilog->zl_itx_list)) {
1581		ret = B_FALSE;
1582		goto out;
1583	}
1584
1585	/* intent log never used? */
1586	lwb = list_head(&zilog->zl_lwb_list);
1587	if (lwb == NULL) {
1588		ret = B_TRUE;
1589		goto out;
1590	}
1591
1592	/*
1593	 * more than 1 log buffer means zil_sync() hasn't yet freed
1594	 * entries after a txg has committed
1595	 */
1596	if (list_next(&zilog->zl_lwb_list, lwb)) {
1597		ret = B_FALSE;
1598		goto out;
1599	}
1600
1601	ASSERT(zil_empty(zilog));
1602	ret = B_TRUE;
1603out:
1604	cv_broadcast(&zilog->zl_cv_writer);
1605	mutex_exit(&zilog->zl_lock);
1606	return (ret);
1607}
1608