1/*-
2 * Copyright (c) 2011 Jakub Wojciech Klama <jceel@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 */
27#include <sys/cdefs.h>
28__FBSDID("$FreeBSD$");
29
30#include <sys/stdint.h>
31#include <sys/stddef.h>
32#include <sys/param.h>
33#include <sys/queue.h>
34#include <sys/types.h>
35#include <sys/systm.h>
36#include <sys/kernel.h>
37#include <sys/bus.h>
38#include <sys/module.h>
39#include <sys/lock.h>
40#include <sys/mutex.h>
41#include <sys/condvar.h>
42#include <sys/sysctl.h>
43#include <sys/rman.h>
44#include <sys/sx.h>
45#include <sys/unistd.h>
46#include <sys/callout.h>
47#include <sys/malloc.h>
48#include <sys/priv.h>
49
50#include <sys/kdb.h>
51
52#include <dev/ofw/ofw_bus.h>
53#include <dev/ofw/ofw_bus_subr.h>
54
55#include <dev/usb/usb.h>
56#include <dev/usb/usbdi.h>
57
58#include <dev/usb/usb_core.h>
59#include <dev/usb/usb_busdma.h>
60#include <dev/usb/usb_process.h>
61#include <dev/usb/usb_util.h>
62
63#include <dev/usb/usb_controller.h>
64#include <dev/usb/usb_bus.h>
65#include <dev/usb/controller/ohci.h>
66#include <dev/usb/controller/ohcireg.h>
67
68#include <arm/lpc/lpcreg.h>
69#include <arm/lpc/lpcvar.h>
70
71#define	I2C_START_BIT		(1 << 8)
72#define	I2C_STOP_BIT		(1 << 9)
73#define	I2C_READ		0x01
74#define	I2C_WRITE		0x00
75#define	DUMMY_BYTE		0x55
76
77#define	lpc_otg_read_4(_sc, _reg)					\
78    bus_space_read_4(_sc->sc_io_tag, _sc->sc_io_hdl, _reg)
79#define	lpc_otg_write_4(_sc, _reg, _value)				\
80    bus_space_write_4(_sc->sc_io_tag, _sc->sc_io_hdl, _reg, _value)
81#define	lpc_otg_wait_write_4(_sc, _wreg, _sreg, _value)			\
82    do {								\
83    	lpc_otg_write_4(_sc, _wreg, _value);				\
84    	while ((lpc_otg_read_4(_sc, _sreg) & _value) != _value);    	\
85    } while (0);
86
87static int lpc_ohci_probe(device_t dev);
88static int lpc_ohci_attach(device_t dev);
89static int lpc_ohci_detach(device_t dev);
90
91static void lpc_otg_i2c_reset(struct ohci_softc *);
92
93static int lpc_isp3101_read(struct ohci_softc *, int);
94static void lpc_isp3101_write(struct ohci_softc *, int, int);
95static void lpc_isp3101_clear(struct ohci_softc *, int, int);
96static void lpc_isp3101_configure(device_t dev, struct ohci_softc *);
97
98static int
99lpc_ohci_probe(device_t dev)
100{
101
102	if (!ofw_bus_status_okay(dev))
103		return (ENXIO);
104
105	if (!ofw_bus_is_compatible(dev, "lpc,usb-ohci"))
106		return (ENXIO);
107
108	device_set_desc(dev, "LPC32x0 USB OHCI controller");
109	return (BUS_PROBE_DEFAULT);
110}
111
112static int
113lpc_ohci_attach(device_t dev)
114{
115	struct ohci_softc *sc = device_get_softc(dev);
116	int err;
117	int rid;
118	int i = 0;
119	uint32_t usbctrl;
120	uint32_t otgstatus;
121
122	sc->sc_bus.parent = dev;
123	sc->sc_bus.devices = sc->sc_devices;
124	sc->sc_bus.devices_max = OHCI_MAX_DEVICES;
125	sc->sc_bus.dma_bits = 32;
126
127	if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(dev),
128	    &ohci_iterate_hw_softc))
129		return (ENOMEM);
130
131	rid = 0;
132	sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
133	if (!sc->sc_io_res) {
134		device_printf(dev, "cannot map OHCI register space\n");
135		goto fail;
136	}
137
138	sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
139	sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
140	sc->sc_io_size = rman_get_size(sc->sc_io_res);
141
142	rid = 0;
143	sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
144	if (sc->sc_irq_res == NULL) {
145		device_printf(dev, "cannot allocate interrupt\n");
146		goto fail;
147	}
148
149	sc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
150	if (!(sc->sc_bus.bdev))
151		goto fail;
152
153	device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
154	strlcpy(sc->sc_vendor, "NXP", sizeof(sc->sc_vendor));
155
156	err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
157	    NULL, (void *)ohci_interrupt, sc, &sc->sc_intr_hdl);
158	if (err) {
159		sc->sc_intr_hdl = NULL;
160		goto fail;
161	}
162
163	usbctrl = lpc_pwr_read(dev, LPC_CLKPWR_USB_CTRL);
164	usbctrl |= LPC_CLKPWR_USB_CTRL_SLAVE_HCLK | LPC_CLKPWR_USB_CTRL_BUSKEEPER;
165	lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
166
167	/* Enable OTG I2C clock */
168	lpc_otg_wait_write_4(sc, LPC_OTG_CLOCK_CTRL,
169	    LPC_OTG_CLOCK_STATUS, LPC_OTG_CLOCK_CTRL_I2C_EN);
170
171	/* Reset OTG I2C bus */
172	lpc_otg_i2c_reset(sc);
173
174	lpc_isp3101_configure(dev, sc);
175
176	/* Configure PLL */
177	usbctrl &= ~(LPC_CLKPWR_USB_CTRL_CLK_EN1 | LPC_CLKPWR_USB_CTRL_CLK_EN2);
178	lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
179
180	usbctrl |= LPC_CLKPWR_USB_CTRL_CLK_EN1;
181	lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
182
183	usbctrl |= LPC_CLKPWR_USB_CTRL_FDBKDIV(192-1);
184	usbctrl |= LPC_CLKPWR_USB_CTRL_POSTDIV(1);
185	usbctrl |= LPC_CLKPWR_USB_CTRL_PLL_PDOWN;
186
187	lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
188	do {
189		usbctrl = lpc_pwr_read(dev, LPC_CLKPWR_USB_CTRL);
190		if (i++ > 100000) {
191			device_printf(dev, "USB OTG PLL doesn't lock!\n");
192			goto fail;
193		}
194	} while ((usbctrl & LPC_CLKPWR_USB_CTRL_PLL_LOCK) == 0);
195
196	usbctrl |= LPC_CLKPWR_USB_CTRL_CLK_EN2;
197	usbctrl |= LPC_CLKPWR_USB_CTRL_HOST_NEED_CLK_EN;
198	lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
199	lpc_otg_wait_write_4(sc, LPC_OTG_CLOCK_CTRL, LPC_OTG_CLOCK_STATUS,
200	    (LPC_OTG_CLOCK_CTRL_AHB_EN | LPC_OTG_CLOCK_CTRL_OTG_EN |
201	    LPC_OTG_CLOCK_CTRL_I2C_EN | LPC_OTG_CLOCK_CTRL_HOST_EN));
202
203	otgstatus = lpc_otg_read_4(sc, LPC_OTG_STATUS);
204	lpc_otg_write_4(sc, LPC_OTG_STATUS, otgstatus |
205	    LPC_OTG_STATUS_HOST_EN);
206
207	lpc_isp3101_write(sc, LPC_ISP3101_OTG_CONTROL_1,
208	    LPC_ISP3101_OTG1_VBUS_DRV);
209
210	err = ohci_init(sc);
211	if (err)
212		goto fail;
213
214	err = device_probe_and_attach(sc->sc_bus.bdev);
215	if (err)
216		goto fail;
217
218	return (0);
219
220fail:
221	if (sc->sc_intr_hdl)
222		bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intr_hdl);
223	if (sc->sc_irq_res)
224		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
225	if (sc->sc_io_res)
226		bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_io_res);
227
228	return (ENXIO);
229}
230
231static int
232lpc_isp3101_read(struct ohci_softc *sc, int reg)
233{
234	int status;
235	int i = 0;
236
237	lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX,
238	    (LPC_ISP3101_I2C_ADDR << 1) | I2C_START_BIT);
239	lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX, reg);
240	lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX, (LPC_ISP3101_I2C_ADDR << 1) |
241	    I2C_START_BIT | I2C_READ);
242	lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX, I2C_STOP_BIT | DUMMY_BYTE);
243
244	do {
245		status = lpc_otg_read_4(sc, LPC_OTG_I2C_STATUS);
246		i++;
247	} while ((status & LPC_OTG_I2C_STATUS_TDI) == 0 || i < 100000);
248
249	lpc_otg_write_4(sc, LPC_OTG_I2C_STATUS, LPC_OTG_I2C_STATUS_TDI);
250
251	return (lpc_otg_read_4(sc, LPC_OTG_I2C_TXRX) & 0xff);
252}
253
254static void
255lpc_otg_i2c_reset(struct ohci_softc *sc)
256{
257	int ctrl;
258	int i = 0;
259
260	lpc_otg_write_4(sc, LPC_OTG_I2C_CLKHI, 0x3f);
261	lpc_otg_write_4(sc, LPC_OTG_I2C_CLKLO, 0x3f);
262
263	ctrl = lpc_otg_read_4(sc, LPC_OTG_I2C_CTRL);
264	lpc_otg_write_4(sc, LPC_OTG_I2C_CTRL, ctrl | LPC_OTG_I2C_CTRL_SRST);
265
266	do {
267		ctrl = lpc_otg_read_4(sc, LPC_OTG_I2C_CTRL);
268		i++;
269	} while (ctrl & LPC_OTG_I2C_CTRL_SRST);
270}
271
272static void
273lpc_isp3101_write(struct ohci_softc *sc, int reg, int value)
274{
275	int status;
276	int i = 0;
277
278	bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_TXRX,
279	    (LPC_ISP3101_I2C_ADDR << 1) | I2C_START_BIT);
280	bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_TXRX,
281	    (reg | I2C_WRITE));
282	bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_TXRX,
283	    (value | I2C_STOP_BIT));
284
285	do {
286		status = bus_space_read_4(sc->sc_io_tag, sc->sc_io_hdl,
287		    LPC_OTG_I2C_STATUS);
288		i++;
289	} while ((status & LPC_OTG_I2C_STATUS_TDI) == 0 || i < 100000);
290
291	bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_STATUS,
292	    LPC_OTG_I2C_STATUS_TDI);
293}
294
295static __inline void
296lpc_isp3101_clear(struct ohci_softc *sc, int reg, int value)
297{
298	lpc_isp3101_write(sc, (reg | LPC_ISP3101_REG_CLEAR_ADDR), value);
299}
300
301static void
302lpc_isp3101_configure(device_t dev, struct ohci_softc *sc)
303{
304	lpc_isp3101_clear(sc, LPC_ISP3101_MODE_CONTROL_1, LPC_ISP3101_MC1_UART_EN);
305	lpc_isp3101_clear(sc, LPC_ISP3101_MODE_CONTROL_1, ~LPC_ISP3101_MC1_SPEED_REG);
306	lpc_isp3101_write(sc, LPC_ISP3101_MODE_CONTROL_1, LPC_ISP3101_MC1_SPEED_REG);
307	lpc_isp3101_clear(sc, LPC_ISP3101_MODE_CONTROL_2, ~0);
308	lpc_isp3101_write(sc, LPC_ISP3101_MODE_CONTROL_2,
309	    (LPC_ISP3101_MC2_BI_DI | LPC_ISP3101_MC2_PSW_EN
310	    | LPC_ISP3101_MC2_SPD_SUSP_CTRL));
311
312	lpc_isp3101_clear(sc, LPC_ISP3101_OTG_CONTROL_1, ~0);
313	lpc_isp3101_write(sc, LPC_ISP3101_MODE_CONTROL_1, LPC_ISP3101_MC1_DAT_SE0);
314	lpc_isp3101_write(sc, LPC_ISP3101_OTG_CONTROL_1,
315	    (LPC_ISP3101_OTG1_DM_PULLDOWN | LPC_ISP3101_OTG1_DP_PULLDOWN));
316
317	lpc_isp3101_clear(sc, LPC_ISP3101_OTG_CONTROL_1,
318	    (LPC_ISP3101_OTG1_DM_PULLUP | LPC_ISP3101_OTG1_DP_PULLUP));
319
320	lpc_isp3101_clear(sc, LPC_ISP3101_OTG_INTR_LATCH, ~0);
321	lpc_isp3101_clear(sc, LPC_ISP3101_OTG_INTR_FALLING, ~0);
322	lpc_isp3101_clear(sc, LPC_ISP3101_OTG_INTR_RISING, ~0);
323
324	device_printf(dev,
325	    "ISP3101 PHY <vendor:0x%04x, product:0x%04x, version:0x%04x>\n",
326	    (lpc_isp3101_read(sc, 0x00) | (lpc_isp3101_read(sc, 0x01) << 8)),
327	    (lpc_isp3101_read(sc, 0x03) | (lpc_isp3101_read(sc, 0x04) << 8)),
328	    (lpc_isp3101_read(sc, 0x14) | (lpc_isp3101_read(sc, 0x15) << 8)));
329}
330
331static int
332lpc_ohci_detach(device_t dev)
333{
334	return (0);
335}
336
337
338static device_method_t lpc_ohci_methods[] = {
339	/* Device interface */
340	DEVMETHOD(device_probe,		lpc_ohci_probe),
341	DEVMETHOD(device_attach,	lpc_ohci_attach),
342	DEVMETHOD(device_detach,	lpc_ohci_detach),
343	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
344
345	/* Bus interface */
346	DEVMETHOD(bus_print_child,	bus_generic_print_child),
347	{ 0, 0 }
348};
349
350static driver_t lpc_ohci_driver = {
351	"ohci",
352	lpc_ohci_methods,
353	sizeof(struct ohci_softc),
354};
355
356static devclass_t lpc_ohci_devclass;
357
358DRIVER_MODULE(ohci, simplebus, lpc_ohci_driver, lpc_ohci_devclass, 0, 0);
359MODULE_DEPEND(ohci, usb, 1, 1, 1);
360