1/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */ 2/* 3 * Copyright (c) 1993, 1994, 1995, 1996, 1997 4 * The Regents of the University of California. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by the Computer Systems 17 * Engineering Group at Lawrence Berkeley Laboratory. 18 * 4. Neither the name of the University nor of the Laboratory may be used 19 * to endorse or promote products derived from this software without 20 * specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35/* 36 * Remote packet capture mechanisms and extensions from WinPcap: 37 * 38 * Copyright (c) 2002 - 2003 39 * NetGroup, Politecnico di Torino (Italy) 40 * All rights reserved. 41 * 42 * Redistribution and use in source and binary forms, with or without 43 * modification, are permitted provided that the following conditions 44 * are met: 45 * 46 * 1. Redistributions of source code must retain the above copyright 47 * notice, this list of conditions and the following disclaimer. 48 * 2. Redistributions in binary form must reproduce the above copyright 49 * notice, this list of conditions and the following disclaimer in the 50 * documentation and/or other materials provided with the distribution. 51 * 3. Neither the name of the Politecnico di Torino nor the names of its 52 * contributors may be used to endorse or promote products derived from 53 * this software without specific prior written permission. 54 * 55 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 56 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 57 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 58 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 59 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 60 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 61 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 62 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 63 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 64 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 65 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 66 * 67 */ 68 69#ifndef lib_pcap_pcap_h 70#define lib_pcap_pcap_h 71 72#include <pcap/funcattrs.h> 73 74#include <pcap/pcap-inttypes.h> 75 76#if defined(_WIN32) 77 #include <winsock2.h> /* u_int, u_char etc. */ 78 #include <io.h> /* _get_osfhandle() */ 79#elif defined(MSDOS) 80 #include <sys/types.h> /* u_int, u_char etc. */ 81 #include <sys/socket.h> 82#else /* UN*X */ 83 #include <sys/types.h> /* u_int, u_char etc. */ 84 #include <sys/time.h> 85#endif /* _WIN32/MSDOS/UN*X */ 86 87#include <pcap/socket.h> /* for SOCKET, as the active-mode rpcap APIs use it */ 88#include <net/bpf.h> 89 90#include <stdio.h> 91 92#ifdef __cplusplus 93extern "C" { 94#endif 95 96/* 97 * Version number of the current version of the pcap file format. 98 * 99 * NOTE: this is *NOT* the version number of the libpcap library. 100 * To fetch the version information for the version of libpcap 101 * you're using, use pcap_lib_version(). 102 */ 103#define PCAP_VERSION_MAJOR 2 104#define PCAP_VERSION_MINOR 4 105 106#define PCAP_ERRBUF_SIZE 256 107 108/* 109 * Compatibility for systems that have a bpf.h that 110 * predates the bpf typedefs for 64-bit support. 111 */ 112#if BPF_RELEASE - 0 < 199406 113typedef int bpf_int32; 114typedef u_int bpf_u_int32; 115#endif 116 117typedef struct pcap pcap_t; 118typedef struct pcap_dumper pcap_dumper_t; 119typedef struct pcap_if pcap_if_t; 120typedef struct pcap_addr pcap_addr_t; 121 122/* 123 * The first record in the file contains saved values for some 124 * of the flags used in the printout phases of tcpdump. 125 * Many fields here are 32 bit ints so compilers won't insert unwanted 126 * padding; these files need to be interchangeable across architectures. 127 * 128 * Do not change the layout of this structure, in any way (this includes 129 * changes that only affect the length of fields in this structure). 130 * 131 * Also, do not change the interpretation of any of the members of this 132 * structure, in any way (this includes using values other than 133 * LINKTYPE_ values, as defined in "savefile.c", in the "linktype" 134 * field). 135 * 136 * Instead: 137 * 138 * introduce a new structure for the new format, if the layout 139 * of the structure changed; 140 * 141 * send mail to "tcpdump-workers@lists.tcpdump.org", requesting 142 * a new magic number for your new capture file format, and, when 143 * you get the new magic number, put it in "savefile.c"; 144 * 145 * use that magic number for save files with the changed file 146 * header; 147 * 148 * make the code in "savefile.c" capable of reading files with 149 * the old file header as well as files with the new file header 150 * (using the magic number to determine the header format). 151 * 152 * Then supply the changes by forking the branch at 153 * 154 * https://github.com/the-tcpdump-group/libpcap/issues 155 * 156 * and issuing a pull request, so that future versions of libpcap and 157 * programs that use it (such as tcpdump) will be able to read your new 158 * capture file format. 159 */ 160struct pcap_file_header { 161 bpf_u_int32 magic; 162 u_short version_major; 163 u_short version_minor; 164 bpf_int32 thiszone; /* gmt to local correction */ 165 bpf_u_int32 sigfigs; /* accuracy of timestamps */ 166 bpf_u_int32 snaplen; /* max length saved portion of each pkt */ 167 bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */ 168}; 169 170/* 171 * Macros for the value returned by pcap_datalink_ext(). 172 * 173 * If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro 174 * gives the FCS length of packets in the capture. 175 */ 176#define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000) 177#define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28) 178#define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000) 179 180typedef enum { 181 PCAP_D_INOUT = 0, 182 PCAP_D_IN, 183 PCAP_D_OUT 184} pcap_direction_t; 185 186/* 187 * Generic per-packet information, as supplied by libpcap. 188 * 189 * The time stamp can and should be a "struct timeval", regardless of 190 * whether your system supports 32-bit tv_sec in "struct timeval", 191 * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit 192 * and 64-bit applications. The on-disk format of savefiles uses 32-bit 193 * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit 194 * and 64-bit versions of libpcap, even if they're on the same platform, 195 * should supply the appropriate version of "struct timeval", even if 196 * that's not what the underlying packet capture mechanism supplies. 197 */ 198struct pcap_pkthdr { 199 struct timeval ts; /* time stamp */ 200 bpf_u_int32 caplen; /* length of portion present */ 201 bpf_u_int32 len; /* length this packet (off wire) */ 202}; 203 204/* 205 * As returned by the pcap_stats() 206 */ 207struct pcap_stat { 208 u_int ps_recv; /* number of packets received */ 209 u_int ps_drop; /* number of packets dropped */ 210 u_int ps_ifdrop; /* drops by interface -- only supported on some platforms */ 211#ifdef _WIN32 212 u_int ps_capt; /* number of packets that reach the application */ 213 u_int ps_sent; /* number of packets sent by the server on the network */ 214 u_int ps_netdrop; /* number of packets lost on the network */ 215#endif /* _WIN32 */ 216}; 217 218#ifdef MSDOS 219/* 220 * As returned by the pcap_stats_ex() 221 */ 222struct pcap_stat_ex { 223 u_long rx_packets; /* total packets received */ 224 u_long tx_packets; /* total packets transmitted */ 225 u_long rx_bytes; /* total bytes received */ 226 u_long tx_bytes; /* total bytes transmitted */ 227 u_long rx_errors; /* bad packets received */ 228 u_long tx_errors; /* packet transmit problems */ 229 u_long rx_dropped; /* no space in Rx buffers */ 230 u_long tx_dropped; /* no space available for Tx */ 231 u_long multicast; /* multicast packets received */ 232 u_long collisions; 233 234 /* detailed rx_errors: */ 235 u_long rx_length_errors; 236 u_long rx_over_errors; /* receiver ring buff overflow */ 237 u_long rx_crc_errors; /* recv'd pkt with crc error */ 238 u_long rx_frame_errors; /* recv'd frame alignment error */ 239 u_long rx_fifo_errors; /* recv'r fifo overrun */ 240 u_long rx_missed_errors; /* recv'r missed packet */ 241 242 /* detailed tx_errors */ 243 u_long tx_aborted_errors; 244 u_long tx_carrier_errors; 245 u_long tx_fifo_errors; 246 u_long tx_heartbeat_errors; 247 u_long tx_window_errors; 248 }; 249#endif 250 251/* 252 * Item in a list of interfaces. 253 */ 254struct pcap_if { 255 struct pcap_if *next; 256 char *name; /* name to hand to "pcap_open_live()" */ 257 char *description; /* textual description of interface, or NULL */ 258 struct pcap_addr *addresses; 259 bpf_u_int32 flags; /* PCAP_IF_ interface flags */ 260}; 261 262#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */ 263#define PCAP_IF_UP 0x00000002 /* interface is up */ 264#define PCAP_IF_RUNNING 0x00000004 /* interface is running */ 265#define PCAP_IF_WIRELESS 0x00000008 /* interface is wireless (*NOT* necessarily Wi-Fi!) */ 266#define PCAP_IF_CONNECTION_STATUS 0x00000030 /* connection status: */ 267#define PCAP_IF_CONNECTION_STATUS_UNKNOWN 0x00000000 /* unknown */ 268#define PCAP_IF_CONNECTION_STATUS_CONNECTED 0x00000010 /* connected */ 269#define PCAP_IF_CONNECTION_STATUS_DISCONNECTED 0x00000020 /* disconnected */ 270#define PCAP_IF_CONNECTION_STATUS_NOT_APPLICABLE 0x00000030 /* not applicable */ 271 272/* 273 * Representation of an interface address. 274 */ 275struct pcap_addr { 276 struct pcap_addr *next; 277 struct sockaddr *addr; /* address */ 278 struct sockaddr *netmask; /* netmask for that address */ 279 struct sockaddr *broadaddr; /* broadcast address for that address */ 280 struct sockaddr *dstaddr; /* P2P destination address for that address */ 281}; 282 283typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *, 284 const u_char *); 285 286/* 287 * Error codes for the pcap API. 288 * These will all be negative, so you can check for the success or 289 * failure of a call that returns these codes by checking for a 290 * negative value. 291 */ 292#define PCAP_ERROR -1 /* generic error code */ 293#define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */ 294#define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */ 295#define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */ 296#define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */ 297#define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */ 298#define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */ 299#define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */ 300#define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */ 301#define PCAP_ERROR_CANTSET_TSTAMP_TYPE -10 /* this device doesn't support setting the time stamp type */ 302#define PCAP_ERROR_PROMISC_PERM_DENIED -11 /* you don't have permission to capture in promiscuous mode */ 303#define PCAP_ERROR_TSTAMP_PRECISION_NOTSUP -12 /* the requested time stamp precision is not supported */ 304 305/* 306 * Warning codes for the pcap API. 307 * These will all be positive and non-zero, so they won't look like 308 * errors. 309 */ 310#define PCAP_WARNING 1 /* generic warning code */ 311#define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */ 312#define PCAP_WARNING_TSTAMP_TYPE_NOTSUP 3 /* the requested time stamp type is not supported */ 313 314/* 315 * Value to pass to pcap_compile() as the netmask if you don't know what 316 * the netmask is. 317 */ 318#define PCAP_NETMASK_UNKNOWN 0xffffffff 319 320/* 321 * We're deprecating pcap_lookupdev() for various reasons (not 322 * thread-safe, can behave weirdly with WinPcap). Callers 323 * should use pcap_findalldevs() and use the first device. 324 */ 325PCAP_API char *pcap_lookupdev(char *) 326PCAP_DEPRECATED(pcap_lookupdev, "use 'pcap_findalldevs' and use the first device"); 327 328PCAP_API int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *); 329 330PCAP_API pcap_t *pcap_create(const char *, char *); 331PCAP_API int pcap_set_snaplen(pcap_t *, int); 332PCAP_API int pcap_set_promisc(pcap_t *, int); 333PCAP_API int pcap_can_set_rfmon(pcap_t *); 334PCAP_API int pcap_set_rfmon(pcap_t *, int); 335PCAP_API int pcap_set_timeout(pcap_t *, int); 336PCAP_API int pcap_set_tstamp_type(pcap_t *, int); 337PCAP_API int pcap_set_immediate_mode(pcap_t *, int); 338PCAP_API int pcap_set_buffer_size(pcap_t *, int); 339PCAP_API int pcap_set_tstamp_precision(pcap_t *, int); 340PCAP_API int pcap_get_tstamp_precision(pcap_t *); 341PCAP_API int pcap_activate(pcap_t *); 342 343PCAP_API int pcap_list_tstamp_types(pcap_t *, int **); 344PCAP_API void pcap_free_tstamp_types(int *); 345PCAP_API int pcap_tstamp_type_name_to_val(const char *); 346PCAP_API const char *pcap_tstamp_type_val_to_name(int); 347PCAP_API const char *pcap_tstamp_type_val_to_description(int); 348 349#ifdef __linux__ 350PCAP_API int pcap_set_protocol_linux(pcap_t *, int); 351#endif 352 353/* 354 * Time stamp types. 355 * Not all systems and interfaces will necessarily support all of these. 356 * 357 * A system that supports PCAP_TSTAMP_HOST is offering time stamps 358 * provided by the host machine, rather than by the capture device, 359 * but not committing to any characteristics of the time stamp; 360 * it will not offer any of the PCAP_TSTAMP_HOST_ subtypes. 361 * 362 * PCAP_TSTAMP_HOST_LOWPREC is a time stamp, provided by the host machine, 363 * that's low-precision but relatively cheap to fetch; it's normally done 364 * using the system clock, so it's normally synchronized with times you'd 365 * fetch from system calls. 366 * 367 * PCAP_TSTAMP_HOST_HIPREC is a time stamp, provided by the host machine, 368 * that's high-precision; it might be more expensive to fetch. It might 369 * or might not be synchronized with the system clock, and might have 370 * problems with time stamps for packets received on different CPUs, 371 * depending on the platform. 372 * 373 * PCAP_TSTAMP_ADAPTER is a high-precision time stamp supplied by the 374 * capture device; it's synchronized with the system clock. 375 * 376 * PCAP_TSTAMP_ADAPTER_UNSYNCED is a high-precision time stamp supplied by 377 * the capture device; it's not synchronized with the system clock. 378 * 379 * Note that time stamps synchronized with the system clock can go 380 * backwards, as the system clock can go backwards. If a clock is 381 * not in sync with the system clock, that could be because the 382 * system clock isn't keeping accurate time, because the other 383 * clock isn't keeping accurate time, or both. 384 * 385 * Note that host-provided time stamps generally correspond to the 386 * time when the time-stamping code sees the packet; this could 387 * be some unknown amount of time after the first or last bit of 388 * the packet is received by the network adapter, due to batching 389 * of interrupts for packet arrival, queueing delays, etc.. 390 */ 391#define PCAP_TSTAMP_HOST 0 /* host-provided, unknown characteristics */ 392#define PCAP_TSTAMP_HOST_LOWPREC 1 /* host-provided, low precision */ 393#define PCAP_TSTAMP_HOST_HIPREC 2 /* host-provided, high precision */ 394#define PCAP_TSTAMP_ADAPTER 3 /* device-provided, synced with the system clock */ 395#define PCAP_TSTAMP_ADAPTER_UNSYNCED 4 /* device-provided, not synced with the system clock */ 396 397/* 398 * Time stamp resolution types. 399 * Not all systems and interfaces will necessarily support all of these 400 * resolutions when doing live captures; all of them can be requested 401 * when reading a savefile. 402 */ 403#define PCAP_TSTAMP_PRECISION_MICRO 0 /* use timestamps with microsecond precision, default */ 404#define PCAP_TSTAMP_PRECISION_NANO 1 /* use timestamps with nanosecond precision */ 405 406PCAP_API pcap_t *pcap_open_live(const char *, int, int, int, char *); 407PCAP_API pcap_t *pcap_open_dead(int, int); 408PCAP_API pcap_t *pcap_open_dead_with_tstamp_precision(int, int, u_int); 409PCAP_API pcap_t *pcap_open_offline_with_tstamp_precision(const char *, u_int, char *); 410PCAP_API pcap_t *pcap_open_offline(const char *, char *); 411#ifdef _WIN32 412 PCAP_API pcap_t *pcap_hopen_offline_with_tstamp_precision(intptr_t, u_int, char *); 413 PCAP_API pcap_t *pcap_hopen_offline(intptr_t, char *); 414 /* 415 * If we're building libpcap, these are internal routines in savefile.c, 416 * so we must not define them as macros. 417 * 418 * If we're not building libpcap, given that the version of the C runtime 419 * with which libpcap was built might be different from the version 420 * of the C runtime with which an application using libpcap was built, 421 * and that a FILE structure may differ between the two versions of the 422 * C runtime, calls to _fileno() must use the version of _fileno() in 423 * the C runtime used to open the FILE *, not the version in the C 424 * runtime with which libpcap was built. (Maybe once the Universal CRT 425 * rules the world, this will cease to be a problem.) 426 */ 427 #ifndef BUILDING_PCAP 428 #define pcap_fopen_offline_with_tstamp_precision(f,p,b) \ 429 pcap_hopen_offline_with_tstamp_precision(_get_osfhandle(_fileno(f)), p, b) 430 #define pcap_fopen_offline(f,b) \ 431 pcap_hopen_offline(_get_osfhandle(_fileno(f)), b) 432 #endif 433#else /*_WIN32*/ 434 PCAP_API pcap_t *pcap_fopen_offline_with_tstamp_precision(FILE *, u_int, char *); 435 PCAP_API pcap_t *pcap_fopen_offline(FILE *, char *); 436#endif /*_WIN32*/ 437 438PCAP_API void pcap_close(pcap_t *); 439PCAP_API int pcap_loop(pcap_t *, int, pcap_handler, u_char *); 440PCAP_API int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *); 441PCAP_API const u_char *pcap_next(pcap_t *, struct pcap_pkthdr *); 442PCAP_API int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **); 443PCAP_API void pcap_breakloop(pcap_t *); 444PCAP_API int pcap_stats(pcap_t *, struct pcap_stat *); 445PCAP_API int pcap_setfilter(pcap_t *, struct bpf_program *); 446PCAP_API int pcap_setdirection(pcap_t *, pcap_direction_t); 447PCAP_API int pcap_getnonblock(pcap_t *, char *); 448PCAP_API int pcap_setnonblock(pcap_t *, int, char *); 449PCAP_API int pcap_inject(pcap_t *, const void *, size_t); 450PCAP_API int pcap_sendpacket(pcap_t *, const u_char *, int); 451PCAP_API const char *pcap_statustostr(int); 452PCAP_API const char *pcap_strerror(int); 453PCAP_API char *pcap_geterr(pcap_t *); 454PCAP_API void pcap_perror(pcap_t *, const char *); 455PCAP_API int pcap_compile(pcap_t *, struct bpf_program *, const char *, int, 456 bpf_u_int32); 457PCAP_API int pcap_compile_nopcap(int, int, struct bpf_program *, 458 const char *, int, bpf_u_int32); 459PCAP_API void pcap_freecode(struct bpf_program *); 460PCAP_API int pcap_offline_filter(const struct bpf_program *, 461 const struct pcap_pkthdr *, const u_char *); 462PCAP_API int pcap_datalink(pcap_t *); 463PCAP_API int pcap_datalink_ext(pcap_t *); 464PCAP_API int pcap_list_datalinks(pcap_t *, int **); 465PCAP_API int pcap_set_datalink(pcap_t *, int); 466PCAP_API void pcap_free_datalinks(int *); 467PCAP_API int pcap_datalink_name_to_val(const char *); 468PCAP_API const char *pcap_datalink_val_to_name(int); 469PCAP_API const char *pcap_datalink_val_to_description(int); 470PCAP_API const char *pcap_datalink_val_to_description_or_dlt(int); 471PCAP_API int pcap_snapshot(pcap_t *); 472PCAP_API int pcap_is_swapped(pcap_t *); 473PCAP_API int pcap_major_version(pcap_t *); 474PCAP_API int pcap_minor_version(pcap_t *); 475PCAP_API int pcap_bufsize(pcap_t *); 476 477/* XXX */ 478PCAP_API FILE *pcap_file(pcap_t *); 479PCAP_API int pcap_fileno(pcap_t *); 480 481#ifdef _WIN32 482 PCAP_API int pcap_wsockinit(void); 483#endif 484 485PCAP_API pcap_dumper_t *pcap_dump_open(pcap_t *, const char *); 486#ifdef _WIN32 487 PCAP_API pcap_dumper_t *pcap_dump_hopen(pcap_t *, intptr_t); 488 /* 489 * If we're building libpcap, this is an internal routine in sf-pcap.c, so 490 * we must not define it as a macro. 491 * 492 * If we're not building libpcap, given that the version of the C runtime 493 * with which libpcap was built might be different from the version 494 * of the C runtime with which an application using libpcap was built, 495 * and that a FILE structure may differ between the two versions of the 496 * C runtime, calls to _fileno() must use the version of _fileno() in 497 * the C runtime used to open the FILE *, not the version in the C 498 * runtime with which libpcap was built. (Maybe once the Universal CRT 499 * rules the world, this will cease to be a problem.) 500 */ 501 #ifndef BUILDING_PCAP 502 #define pcap_dump_fopen(p,f) \ 503 pcap_dump_hopen(p, _get_osfhandle(_fileno(f))) 504 #endif 505#else /*_WIN32*/ 506 PCAP_API pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp); 507#endif /*_WIN32*/ 508PCAP_API pcap_dumper_t *pcap_dump_open_append(pcap_t *, const char *); 509PCAP_API FILE *pcap_dump_file(pcap_dumper_t *); 510PCAP_API long pcap_dump_ftell(pcap_dumper_t *); 511PCAP_API int64_t pcap_dump_ftell64(pcap_dumper_t *); 512PCAP_API int pcap_dump_flush(pcap_dumper_t *); 513PCAP_API void pcap_dump_close(pcap_dumper_t *); 514PCAP_API void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *); 515 516PCAP_API int pcap_findalldevs(pcap_if_t **, char *); 517PCAP_API void pcap_freealldevs(pcap_if_t *); 518 519/* 520 * We return a pointer to the version string, rather than exporting the 521 * version string directly. 522 * 523 * On at least some UNIXes, if you import data from a shared library into 524 * an program, the data is bound into the program binary, so if the string 525 * in the version of the library with which the program was linked isn't 526 * the same as the string in the version of the library with which the 527 * program is being run, various undesirable things may happen (warnings, 528 * the string being the one from the version of the library with which the 529 * program was linked, or even weirder things, such as the string being the 530 * one from the library but being truncated). 531 * 532 * On Windows, the string is constructed at run time. 533 */ 534PCAP_API const char *pcap_lib_version(void); 535 536/* 537 * On at least some versions of NetBSD and QNX, we don't want to declare 538 * bpf_filter() here, as it's also be declared in <net/bpf.h>, with a 539 * different signature, but, on other BSD-flavored UN*Xes, it's not 540 * declared in <net/bpf.h>, so we *do* want to declare it here, so it's 541 * declared when we build pcap-bpf.c. 542 */ 543#if !defined(__NetBSD__) && !defined(__QNX__) 544 PCAP_API u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); 545#endif 546PCAP_API int bpf_validate(const struct bpf_insn *f, int len); 547PCAP_API char *bpf_image(const struct bpf_insn *, int); 548PCAP_API void bpf_dump(const struct bpf_program *, int); 549 550#if defined(_WIN32) 551 552 /* 553 * Win32 definitions 554 */ 555 556 /*! 557 \brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit(). 558 */ 559 struct pcap_send_queue 560 { 561 u_int maxlen; /* Maximum size of the queue, in bytes. This 562 variable contains the size of the buffer field. */ 563 u_int len; /* Current size of the queue, in bytes. */ 564 char *buffer; /* Buffer containing the packets to be sent. */ 565 }; 566 567 typedef struct pcap_send_queue pcap_send_queue; 568 569 /*! 570 \brief This typedef is a support for the pcap_get_airpcap_handle() function 571 */ 572 #if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_) 573 #define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ 574 typedef struct _AirpcapHandle *PAirpcapHandle; 575 #endif 576 577 PCAP_API int pcap_setbuff(pcap_t *p, int dim); 578 PCAP_API int pcap_setmode(pcap_t *p, int mode); 579 PCAP_API int pcap_setmintocopy(pcap_t *p, int size); 580 581 PCAP_API HANDLE pcap_getevent(pcap_t *p); 582 583 PCAP_API int pcap_oid_get_request(pcap_t *, bpf_u_int32, void *, size_t *); 584 PCAP_API int pcap_oid_set_request(pcap_t *, bpf_u_int32, const void *, size_t *); 585 586 PCAP_API pcap_send_queue* pcap_sendqueue_alloc(u_int memsize); 587 588 PCAP_API void pcap_sendqueue_destroy(pcap_send_queue* queue); 589 590 PCAP_API int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data); 591 592 PCAP_API u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync); 593 594 PCAP_API struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size); 595 596 PCAP_API int pcap_setuserbuffer(pcap_t *p, int size); 597 598 PCAP_API int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks); 599 600 PCAP_API int pcap_live_dump_ended(pcap_t *p, int sync); 601 602 PCAP_API int pcap_start_oem(char* err_str, int flags); 603 604 PCAP_API PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p); 605 606 #define MODE_CAPT 0 607 #define MODE_STAT 1 608 #define MODE_MON 2 609 610#elif defined(MSDOS) 611 612 /* 613 * MS-DOS definitions 614 */ 615 616 PCAP_API int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *); 617 PCAP_API void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait); 618 PCAP_API u_long pcap_mac_packets (void); 619 620#else /* UN*X */ 621 622 /* 623 * UN*X definitions 624 */ 625 626 PCAP_API int pcap_get_selectable_fd(pcap_t *); 627 PCAP_API struct timeval *pcap_get_required_select_timeout(pcap_t *); 628 629#endif /* _WIN32/MSDOS/UN*X */ 630 631#if 0 /* Remote capture is disabled on FreeBSD */ 632/* 633 * Remote capture definitions. 634 * 635 * These routines are only present if libpcap has been configured to 636 * include remote capture support. 637 */ 638 639/* 640 * The maximum buffer size in which address, port, interface names are kept. 641 * 642 * In case the adapter name or such is larger than this value, it is truncated. 643 * This is not used by the user; however it must be aware that an hostname / interface 644 * name longer than this value will be truncated. 645 */ 646#define PCAP_BUF_SIZE 1024 647 648/* 649 * The type of input source, passed to pcap_open(). 650 */ 651#define PCAP_SRC_FILE 2 /* local savefile */ 652#define PCAP_SRC_IFLOCAL 3 /* local network interface */ 653#define PCAP_SRC_IFREMOTE 4 /* interface on a remote host, using RPCAP */ 654 655/* 656 * The formats allowed by pcap_open() are the following: 657 * - file://path_and_filename [opens a local file] 658 * - rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol] 659 * - rpcap://host/devicename [opens the selected device available on a remote host] 660 * - rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP] 661 * - adaptername [to open a local adapter; kept for compability, but it is strongly discouraged] 662 * - (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged] 663 * 664 * The formats allowed by the pcap_findalldevs_ex() are the following: 665 * - file://folder/ [lists all the files in the given folder] 666 * - rpcap:// [lists all local adapters] 667 * - rpcap://host:port/ [lists the devices available on a remote host] 668 * 669 * Referring to the 'host' and 'port' parameters, they can be either numeric or literal. Since 670 * IPv6 is fully supported, these are the allowed formats: 671 * 672 * - host (literal): e.g. host.foo.bar 673 * - host (numeric IPv4): e.g. 10.11.12.13 674 * - host (numeric IPv4, IPv6 style): e.g. [10.11.12.13] 675 * - host (numeric IPv6): e.g. [1:2:3::4] 676 * - port: can be either numeric (e.g. '80') or literal (e.g. 'http') 677 * 678 * Here you find some allowed examples: 679 * - rpcap://host.foo.bar/devicename [everything literal, no port number] 680 * - rpcap://host.foo.bar:1234/devicename [everything literal, with port number] 681 * - rpcap://10.11.12.13/devicename [IPv4 numeric, no port number] 682 * - rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number] 683 * - rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number] 684 * - rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number] 685 * - rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number] 686 * - rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number] 687 */ 688 689/* 690 * URL schemes for capture source. 691 */ 692/* 693 * This string indicates that the user wants to open a capture from a 694 * local file. 695 */ 696#define PCAP_SRC_FILE_STRING "file://" 697/* 698 * This string indicates that the user wants to open a capture from a 699 * network interface. This string does not necessarily involve the use 700 * of the RPCAP protocol. If the interface required resides on the local 701 * host, the RPCAP protocol is not involved and the local functions are used. 702 */ 703#define PCAP_SRC_IF_STRING "rpcap://" 704 705/* 706 * Flags to pass to pcap_open(). 707 */ 708 709/* 710 * Specifies whether promiscuous mode is to be used. 711 */ 712#define PCAP_OPENFLAG_PROMISCUOUS 0x00000001 713 714/* 715 * Specifies, for an RPCAP capture, whether the data transfer (in 716 * case of a remote capture) has to be done with UDP protocol. 717 * 718 * If it is '1' if you want a UDP data connection, '0' if you want 719 * a TCP data connection; control connection is always TCP-based. 720 * A UDP connection is much lighter, but it does not guarantee that all 721 * the captured packets arrive to the client workstation. Moreover, 722 * it could be harmful in case of network congestion. 723 * This flag is meaningless if the source is not a remote interface. 724 * In that case, it is simply ignored. 725 */ 726#define PCAP_OPENFLAG_DATATX_UDP 0x00000002 727 728/* 729 * Specifies wheether the remote probe will capture its own generated 730 * traffic. 731 * 732 * In case the remote probe uses the same interface to capture traffic 733 * and to send data back to the caller, the captured traffic includes 734 * the RPCAP traffic as well. If this flag is turned on, the RPCAP 735 * traffic is excluded from the capture, so that the trace returned 736 * back to the collector is does not include this traffic. 737 * 738 * Has no effect on local interfaces or savefiles. 739 */ 740#define PCAP_OPENFLAG_NOCAPTURE_RPCAP 0x00000004 741 742/* 743 * Specifies whether the local adapter will capture its own generated traffic. 744 * 745 * This flag tells the underlying capture driver to drop the packets 746 * that were sent by itself. This is useful when building applications 747 * such as bridges that should ignore the traffic they just sent. 748 * 749 * Supported only on Windows. 750 */ 751#define PCAP_OPENFLAG_NOCAPTURE_LOCAL 0x00000008 752 753/* 754 * This flag configures the adapter for maximum responsiveness. 755 * 756 * In presence of a large value for nbytes, WinPcap waits for the arrival 757 * of several packets before copying the data to the user. This guarantees 758 * a low number of system calls, i.e. lower processor usage, i.e. better 759 * performance, which is good for applications like sniffers. If the user 760 * sets the PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will 761 * copy the packets as soon as the application is ready to receive them. 762 * This is suggested for real time applications (such as, for example, 763 * a bridge) that need the best responsiveness. 764 * 765 * The equivalent with pcap_create()/pcap_activate() is "immediate mode". 766 */ 767#define PCAP_OPENFLAG_MAX_RESPONSIVENESS 0x00000010 768 769/* 770 * Remote authentication methods. 771 * These are used in the 'type' member of the pcap_rmtauth structure. 772 */ 773 774/* 775 * NULL authentication. 776 * 777 * The 'NULL' authentication has to be equal to 'zero', so that old 778 * applications can just put every field of struct pcap_rmtauth to zero, 779 * and it does work. 780 */ 781#define RPCAP_RMTAUTH_NULL 0 782/* 783 * Username/password authentication. 784 * 785 * With this type of authentication, the RPCAP protocol will use the username/ 786 * password provided to authenticate the user on the remote machine. If the 787 * authentication is successful (and the user has the right to open network 788 * devices) the RPCAP connection will continue; otherwise it will be dropped. 789 * 790 * *******NOTE********: the username and password are sent over the network 791 * to the capture server *IN CLEAR TEXT*. Don't use this on a network 792 * that you don't completely control! (And be *really* careful in your 793 * definition of "completely"!) 794 */ 795#define RPCAP_RMTAUTH_PWD 1 796 797/* 798 * This structure keeps the information needed to autheticate the user 799 * on a remote machine. 800 * 801 * The remote machine can either grant or refuse the access according 802 * to the information provided. 803 * In case the NULL authentication is required, both 'username' and 804 * 'password' can be NULL pointers. 805 * 806 * This structure is meaningless if the source is not a remote interface; 807 * in that case, the functions which requires such a structure can accept 808 * a NULL pointer as well. 809 */ 810struct pcap_rmtauth 811{ 812 /* 813 * \brief Type of the authentication required. 814 * 815 * In order to provide maximum flexibility, we can support different types 816 * of authentication based on the value of this 'type' variable. The currently 817 * supported authentication methods are defined into the 818 * \link remote_auth_methods Remote Authentication Methods Section\endlink. 819 */ 820 int type; 821 /* 822 * \brief Zero-terminated string containing the username that has to be 823 * used on the remote machine for authentication. 824 * 825 * This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication 826 * and it can be NULL. 827 */ 828 char *username; 829 /* 830 * \brief Zero-terminated string containing the password that has to be 831 * used on the remote machine for authentication. 832 * 833 * This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication 834 * and it can be NULL. 835 */ 836 char *password; 837}; 838 839/* 840 * This routine can open a savefile, a local device, or a device on 841 * a remote machine running an RPCAP server. 842 * 843 * For opening a savefile, the pcap_open_offline routines can be used, 844 * and will work just as well; code using them will work on more 845 * platforms than code using pcap_open() to open savefiles. 846 * 847 * For opening a local device, pcap_open_live() can be used; it supports 848 * most of the capabilities that pcap_open() supports, and code using it 849 * will work on more platforms than code using pcap_open(). pcap_create() 850 * and pcap_activate() can also be used; they support all capabilities 851 * that pcap_open() supports, except for the Windows-only 852 * PCAP_OPENFLAG_NOCAPTURE_LOCAL, and support additional capabilities. 853 * 854 * For opening a remote capture, pcap_open() is currently the only 855 * API available. 856 */ 857PCAP_API pcap_t *pcap_open(const char *source, int snaplen, int flags, 858 int read_timeout, struct pcap_rmtauth *auth, char *errbuf); 859PCAP_API int pcap_createsrcstr(char *source, int type, const char *host, 860 const char *port, const char *name, char *errbuf); 861PCAP_API int pcap_parsesrcstr(const char *source, int *type, char *host, 862 char *port, char *name, char *errbuf); 863 864/* 865 * This routine can scan a directory for savefiles, list local capture 866 * devices, or list capture devices on a remote machine running an RPCAP 867 * server. 868 * 869 * For scanning for savefiles, it can be used on both UN*X systems and 870 * Windows systems; for each directory entry it sees, it tries to open 871 * the file as a savefile using pcap_open_offline(), and only includes 872 * it in the list of files if the open succeeds, so it filters out 873 * files for which the user doesn't have read permission, as well as 874 * files that aren't valid savefiles readable by libpcap. 875 * 876 * For listing local capture devices, it's just a wrapper around 877 * pcap_findalldevs(); code using pcap_findalldevs() will work on more 878 * platforms than code using pcap_findalldevs_ex(). 879 * 880 * For listing remote capture devices, pcap_findalldevs_ex() is currently 881 * the only API available. 882 */ 883PCAP_API int pcap_findalldevs_ex(const char *source, 884 struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf); 885 886/* 887 * Sampling methods. 888 * 889 * These allow pcap_loop(), pcap_dispatch(), pcap_next(), and pcap_next_ex() 890 * to see only a sample of packets, rather than all packets. 891 * 892 * Currently, they work only on Windows local captures. 893 */ 894 895/* 896 * Specifies that no sampling is to be done on the current capture. 897 * 898 * In this case, no sampling algorithms are applied to the current capture. 899 */ 900#define PCAP_SAMP_NOSAMP 0 901 902/* 903 * Specifies that only 1 out of N packets must be returned to the user. 904 * 905 * In this case, the 'value' field of the 'pcap_samp' structure indicates the 906 * number of packets (minus 1) that must be discarded before one packet got 907 * accepted. 908 * In other words, if 'value = 10', the first packet is returned to the 909 * caller, while the following 9 are discarded. 910 */ 911#define PCAP_SAMP_1_EVERY_N 1 912 913/* 914 * Specifies that we have to return 1 packet every N milliseconds. 915 * 916 * In this case, the 'value' field of the 'pcap_samp' structure indicates 917 * the 'waiting time' in milliseconds before one packet got accepted. 918 * In other words, if 'value = 10', the first packet is returned to the 919 * caller; the next returned one will be the first packet that arrives 920 * when 10ms have elapsed. 921 */ 922#define PCAP_SAMP_FIRST_AFTER_N_MS 2 923 924/* 925 * This structure defines the information related to sampling. 926 * 927 * In case the sampling is requested, the capturing device should read 928 * only a subset of the packets coming from the source. The returned packets 929 * depend on the sampling parameters. 930 * 931 * WARNING: The sampling process is applied *after* the filtering process. 932 * In other words, packets are filtered first, then the sampling process 933 * selects a subset of the 'filtered' packets and it returns them to the 934 * caller. 935 */ 936struct pcap_samp 937{ 938 /* 939 * Method used for sampling; see above. 940 */ 941 int method; 942 943 /* 944 * This value depends on the sampling method defined. 945 * For its meaning, see above. 946 */ 947 int value; 948}; 949 950/* 951 * New functions. 952 */ 953PCAP_API struct pcap_samp *pcap_setsampling(pcap_t *p); 954 955/* 956 * RPCAP active mode. 957 */ 958 959/* Maximum length of an host name (needed for the RPCAP active mode) */ 960#define RPCAP_HOSTLIST_SIZE 1024 961 962PCAP_API SOCKET pcap_remoteact_accept(const char *address, const char *port, 963 const char *hostlist, char *connectinghost, 964 struct pcap_rmtauth *auth, char *errbuf); 965PCAP_API int pcap_remoteact_list(char *hostlist, char sep, int size, 966 char *errbuf); 967PCAP_API int pcap_remoteact_close(const char *host, char *errbuf); 968PCAP_API void pcap_remoteact_cleanup(void); 969#endif /* Remote capture is disabled on FreeBSD */ 970 971#ifdef __cplusplus 972} 973#endif 974 975#endif /* lib_pcap_pcap_h */ 976