1/*- 2 * Copyright (c) 2012-2015 LSI Corp. 3 * Copyright (c) 2013-2015 Avago Technologies 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the author nor the names of any co-contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 31 * 32 * $FreeBSD: releng/10.3/sys/dev/mpr/mpi/mpi2_cnfg.h 283990 2015-06-04 16:27:18Z slm $ 33 */ 34 35/* 36 * Copyright (c) 2000-2015 LSI Corporation. 37 * Copyright (c) 2013-2015 Avago Technologies 38 * 39 * 40 * Name: mpi2_cnfg.h 41 * Title: MPI Configuration messages and pages 42 * Creation Date: November 10, 2006 43 * 44 * mpi2_cnfg.h Version: 02.00.27 45 * 46 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 47 * prefix are for use only on MPI v2.5 products, and must not be used 48 * with MPI v2.0 products. Unless otherwise noted, names beginning with 49 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 50 * 51 * Version History 52 * --------------- 53 * 54 * Date Version Description 55 * -------- -------- ------------------------------------------------------ 56 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 57 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. 58 * Added Manufacturing Page 11. 59 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE 60 * define. 61 * 06-26-07 02.00.02 Adding generic structure for product-specific 62 * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. 63 * Rework of BIOS Page 2 configuration page. 64 * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the 65 * forms. 66 * Added configuration pages IOC Page 8 and Driver 67 * Persistent Mapping Page 0. 68 * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated 69 * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, 70 * RAID Physical Disk Pages 0 and 1, RAID Configuration 71 * Page 0). 72 * Added new value for AccessStatus field of SAS Device 73 * Page 0 (_SATA_NEEDS_INITIALIZATION). 74 * 10-31-07 02.00.04 Added missing SEPDevHandle field to 75 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 76 * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for 77 * NVDATA. 78 * Modified IOC Page 7 to use masks and added field for 79 * SASBroadcastPrimitiveMasks. 80 * Added MPI2_CONFIG_PAGE_BIOS_4. 81 * Added MPI2_CONFIG_PAGE_LOG_0. 82 * 02-29-08 02.00.06 Modified various names to make them 32-character unique. 83 * Added SAS Device IDs. 84 * Updated Integrated RAID configuration pages including 85 * Manufacturing Page 4, IOC Page 6, and RAID Configuration 86 * Page 0. 87 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. 88 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. 89 * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. 90 * Added missing MaxNumRoutedSasAddresses field to 91 * MPI2_CONFIG_PAGE_EXPANDER_0. 92 * Added SAS Port Page 0. 93 * Modified structure layout for 94 * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. 95 * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use 96 * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. 97 * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF 98 * to 0x000000FF. 99 * Added two new values for the Physical Disk Coercion Size 100 * bits in the Flags field of Manufacturing Page 4. 101 * Added product-specific Manufacturing pages 16 to 31. 102 * Modified Flags bits for controlling write cache on SATA 103 * drives in IO Unit Page 1. 104 * Added new bit to AdditionalControlFlags of SAS IO Unit 105 * Page 1 to control Invalid Topology Correction. 106 * Added additional defines for RAID Volume Page 0 107 * VolumeStatusFlags field. 108 * Modified meaning of RAID Volume Page 0 VolumeSettings 109 * define for auto-configure of hot-swap drives. 110 * Added SupportedPhysDisks field to RAID Volume Page 1 and 111 * added related defines. 112 * Added PhysDiskAttributes field (and related defines) to 113 * RAID Physical Disk Page 0. 114 * Added MPI2_SAS_PHYINFO_PHY_VACANT define. 115 * Added three new DiscoveryStatus bits for SAS IO Unit 116 * Page 0 and SAS Expander Page 0. 117 * Removed multiplexing information from SAS IO Unit pages. 118 * Added BootDeviceWaitTime field to SAS IO Unit Page 4. 119 * Removed Zone Address Resolved bit from PhyInfo and from 120 * Expander Page 0 Flags field. 121 * Added two new AccessStatus values to SAS Device Page 0 122 * for indicating routing problems. Added 3 reserved words 123 * to this page. 124 * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. 125 * Inserted missing reserved field into structure for IOC 126 * Page 6. 127 * Added more pending task bits to RAID Volume Page 0 128 * VolumeStatusFlags defines. 129 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. 130 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 131 * and SAS Expander Page 0 to flag a downstream initiator 132 * when in simplified routing mode. 133 * Removed SATA Init Failure defines for DiscoveryStatus 134 * fields of SAS IO Unit Page 0 and SAS Expander Page 0. 135 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. 136 * Added PortGroups, DmaGroup, and ControlGroup fields to 137 * SAS Device Page 0. 138 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO 139 * Unit Page 6. 140 * Added expander reduced functionality data to SAS 141 * Expander Page 0. 142 * Added SAS PHY Page 2 and SAS PHY Page 3. 143 * 07-30-09 02.00.12 Added IO Unit Page 7. 144 * Added new device ids. 145 * Added SAS IO Unit Page 5. 146 * Added partial and slumber power management capable flags 147 * to SAS Device Page 0 Flags field. 148 * Added PhyInfo defines for power condition. 149 * Added Ethernet configuration pages. 150 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. 151 * Added SAS PHY Page 4 structure and defines. 152 * 02-10-10 02.00.14 Modified the comments for the configuration page 153 * structures that contain an array of data. The host 154 * should use the "count" field in the page data (e.g. the 155 * NumPhys field) to determine the number of valid elements 156 * in the array. 157 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. 158 * Added PowerManagementCapabilities to IO Unit Page 7. 159 * Added PortWidthModGroup field to 160 * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. 161 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. 162 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. 163 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. 164 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT 165 * define. 166 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. 167 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. 168 * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) 169 * defines. 170 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to 171 * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for 172 * the Pinout field. 173 * Added BoardTemperature and BoardTemperatureUnits fields 174 * to MPI2_CONFIG_PAGE_IO_UNIT_7. 175 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define 176 * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. 177 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. 178 * Added IO Unit Page 8, IO Unit Page 9, 179 * and IO Unit Page 10. 180 * Added SASNotifyPrimitiveMasks field to 181 * MPI2_CONFIG_PAGE_IOC_7. 182 * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). 183 * 05-25-11 02.00.20 Cleaned up a few comments. 184 * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities 185 * for PCIe link as obsolete. 186 * Added SpinupFlags field containing a Disable Spin-up bit 187 * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO 188 * Unit Page 4. 189 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. 190 * Added UEFIVersion field to BIOS Page 1 and defined new 191 * BiosOptions bits. 192 * Incorporating additions for MPI v2.5. 193 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. 194 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. 195 * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as 196 * obsolete for MPI v2.5 and later. 197 * Added some defines for 12G SAS speeds. 198 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. 199 * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to 200 * match the specification. 201 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for 202 * future use. 203 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for 204 * MPI2_CONFIG_PAGE_MAN_7. 205 * Added EnclosureLevel and ConnectorName fields to 206 * MPI2_CONFIG_PAGE_SAS_DEV_0. 207 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for 208 * MPI2_CONFIG_PAGE_SAS_DEV_0. 209 * Added EnclosureLevel field to 210 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 211 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for 212 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 213 * -------------------------------------------------------------------------- 214 */ 215 216#ifndef MPI2_CNFG_H 217#define MPI2_CNFG_H 218 219/***************************************************************************** 220* Configuration Page Header and defines 221*****************************************************************************/ 222 223/* Config Page Header */ 224typedef struct _MPI2_CONFIG_PAGE_HEADER 225{ 226 U8 PageVersion; /* 0x00 */ 227 U8 PageLength; /* 0x01 */ 228 U8 PageNumber; /* 0x02 */ 229 U8 PageType; /* 0x03 */ 230} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER, 231 Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t; 232 233typedef union _MPI2_CONFIG_PAGE_HEADER_UNION 234{ 235 MPI2_CONFIG_PAGE_HEADER Struct; 236 U8 Bytes[4]; 237 U16 Word16[2]; 238 U32 Word32; 239} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION, 240 Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion; 241 242/* Extended Config Page Header */ 243typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER 244{ 245 U8 PageVersion; /* 0x00 */ 246 U8 Reserved1; /* 0x01 */ 247 U8 PageNumber; /* 0x02 */ 248 U8 PageType; /* 0x03 */ 249 U16 ExtPageLength; /* 0x04 */ 250 U8 ExtPageType; /* 0x06 */ 251 U8 Reserved2; /* 0x07 */ 252} MPI2_CONFIG_EXTENDED_PAGE_HEADER, 253 MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, 254 Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t; 255 256typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION 257{ 258 MPI2_CONFIG_PAGE_HEADER Struct; 259 MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; 260 U8 Bytes[8]; 261 U16 Word16[4]; 262 U32 Word32[2]; 263} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, 264 Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion; 265 266 267/* PageType field values */ 268#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) 269#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) 270#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) 271#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) 272 273#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) 274#define MPI2_CONFIG_PAGETYPE_IOC (0x01) 275#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) 276#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) 277#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) 278#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) 279#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) 280#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) 281 282#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) 283 284 285/* ExtPageType field values */ 286#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) 287#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) 288#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) 289#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) 290#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) 291#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) 292#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) 293#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) 294#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) 295#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) 296#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) 297 298 299/***************************************************************************** 300* PageAddress defines 301*****************************************************************************/ 302 303/* RAID Volume PageAddress format */ 304#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) 305#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 306#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) 307 308#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) 309 310 311/* RAID Physical Disk PageAddress format */ 312#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) 313#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) 314#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) 315#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) 316 317#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) 318#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) 319 320 321/* SAS Expander PageAddress format */ 322#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) 323#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) 324#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) 325#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) 326 327#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) 328#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) 329#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) 330 331 332/* SAS Device PageAddress format */ 333#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) 334#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 335#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) 336 337#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) 338 339 340/* SAS PHY PageAddress format */ 341#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) 342#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) 343#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) 344 345#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) 346#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) 347 348 349/* SAS Port PageAddress format */ 350#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) 351#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) 352#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) 353 354#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) 355 356 357/* SAS Enclosure PageAddress format */ 358#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) 359#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 360#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) 361 362#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) 363 364 365/* RAID Configuration PageAddress format */ 366#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) 367#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) 368#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) 369#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) 370 371#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) 372 373 374/* Driver Persistent Mapping PageAddress format */ 375#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) 376#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) 377 378#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) 379#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) 380#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) 381 382 383/* Ethernet PageAddress format */ 384#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) 385#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) 386 387#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) 388 389 390 391/**************************************************************************** 392* Configuration messages 393****************************************************************************/ 394 395/* Configuration Request Message */ 396typedef struct _MPI2_CONFIG_REQUEST 397{ 398 U8 Action; /* 0x00 */ 399 U8 SGLFlags; /* 0x01 */ 400 U8 ChainOffset; /* 0x02 */ 401 U8 Function; /* 0x03 */ 402 U16 ExtPageLength; /* 0x04 */ 403 U8 ExtPageType; /* 0x06 */ 404 U8 MsgFlags; /* 0x07 */ 405 U8 VP_ID; /* 0x08 */ 406 U8 VF_ID; /* 0x09 */ 407 U16 Reserved1; /* 0x0A */ 408 U8 Reserved2; /* 0x0C */ 409 U8 ProxyVF_ID; /* 0x0D */ 410 U16 Reserved4; /* 0x0E */ 411 U32 Reserved3; /* 0x10 */ 412 MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ 413 U32 PageAddress; /* 0x18 */ 414 MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */ 415} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST, 416 Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t; 417 418/* values for the Action field */ 419#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) 420#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) 421#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) 422#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) 423#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) 424#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) 425#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) 426#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) 427 428/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ 429 430 431/* Config Reply Message */ 432typedef struct _MPI2_CONFIG_REPLY 433{ 434 U8 Action; /* 0x00 */ 435 U8 SGLFlags; /* 0x01 */ 436 U8 MsgLength; /* 0x02 */ 437 U8 Function; /* 0x03 */ 438 U16 ExtPageLength; /* 0x04 */ 439 U8 ExtPageType; /* 0x06 */ 440 U8 MsgFlags; /* 0x07 */ 441 U8 VP_ID; /* 0x08 */ 442 U8 VF_ID; /* 0x09 */ 443 U16 Reserved1; /* 0x0A */ 444 U16 Reserved2; /* 0x0C */ 445 U16 IOCStatus; /* 0x0E */ 446 U32 IOCLogInfo; /* 0x10 */ 447 MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ 448} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY, 449 Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t; 450 451 452 453/***************************************************************************** 454* 455* C o n f i g u r a t i o n P a g e s 456* 457*****************************************************************************/ 458 459/**************************************************************************** 460* Manufacturing Config pages 461****************************************************************************/ 462 463#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) 464 465/* MPI v2.0 SAS products */ 466#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) 467#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) 468#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) 469#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) 470#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) 471#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) 472#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) 473 474#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) 475 476#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) 477#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) 478#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) 479#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) 480#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) 481#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) 482#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) 483#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) 484#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) 485 486/* MPI v2.5 SAS products */ 487#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096) 488#define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097) 489#define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090) 490#define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091) 491#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) 492#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) 493 494 495 496 497/* Manufacturing Page 0 */ 498 499typedef struct _MPI2_CONFIG_PAGE_MAN_0 500{ 501 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 502 U8 ChipName[16]; /* 0x04 */ 503 U8 ChipRevision[8]; /* 0x14 */ 504 U8 BoardName[16]; /* 0x1C */ 505 U8 BoardAssembly[16]; /* 0x2C */ 506 U8 BoardTracerNumber[16]; /* 0x3C */ 507} MPI2_CONFIG_PAGE_MAN_0, 508 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0, 509 Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t; 510 511#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) 512 513 514/* Manufacturing Page 1 */ 515 516typedef struct _MPI2_CONFIG_PAGE_MAN_1 517{ 518 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 519 U8 VPD[256]; /* 0x04 */ 520} MPI2_CONFIG_PAGE_MAN_1, 521 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1, 522 Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t; 523 524#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) 525 526 527typedef struct _MPI2_CHIP_REVISION_ID 528{ 529 U16 DeviceID; /* 0x00 */ 530 U8 PCIRevisionID; /* 0x02 */ 531 U8 Reserved; /* 0x03 */ 532} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID, 533 Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t; 534 535 536/* Manufacturing Page 2 */ 537 538/* 539 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 540 * one and check Header.PageLength at runtime. 541 */ 542#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS 543#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) 544#endif 545 546typedef struct _MPI2_CONFIG_PAGE_MAN_2 547{ 548 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 549 MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ 550 U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */ 551} MPI2_CONFIG_PAGE_MAN_2, 552 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2, 553 Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t; 554 555#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) 556 557 558/* Manufacturing Page 3 */ 559 560/* 561 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 562 * one and check Header.PageLength at runtime. 563 */ 564#ifndef MPI2_MAN_PAGE_3_INFO_WORDS 565#define MPI2_MAN_PAGE_3_INFO_WORDS (1) 566#endif 567 568typedef struct _MPI2_CONFIG_PAGE_MAN_3 569{ 570 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 571 MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ 572 U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */ 573} MPI2_CONFIG_PAGE_MAN_3, 574 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3, 575 Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t; 576 577#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) 578 579 580/* Manufacturing Page 4 */ 581 582typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS 583{ 584 U8 PowerSaveFlags; /* 0x00 */ 585 U8 InternalOperationsSleepTime; /* 0x01 */ 586 U8 InternalOperationsRunTime; /* 0x02 */ 587 U8 HostIdleTime; /* 0x03 */ 588} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, 589 MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, 590 Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t; 591 592/* defines for the PowerSaveFlags field */ 593#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) 594#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) 595#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) 596#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) 597 598typedef struct _MPI2_CONFIG_PAGE_MAN_4 599{ 600 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 601 U32 Reserved1; /* 0x04 */ 602 U32 Flags; /* 0x08 */ 603 U8 InquirySize; /* 0x0C */ 604 U8 Reserved2; /* 0x0D */ 605 U16 Reserved3; /* 0x0E */ 606 U8 InquiryData[56]; /* 0x10 */ 607 U32 RAID0VolumeSettings; /* 0x48 */ 608 U32 RAID1EVolumeSettings; /* 0x4C */ 609 U32 RAID1VolumeSettings; /* 0x50 */ 610 U32 RAID10VolumeSettings; /* 0x54 */ 611 U32 Reserved4; /* 0x58 */ 612 U32 Reserved5; /* 0x5C */ 613 MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */ 614 U8 MaxOCEDisks; /* 0x64 */ 615 U8 ResyncRate; /* 0x65 */ 616 U16 DataScrubDuration; /* 0x66 */ 617 U8 MaxHotSpares; /* 0x68 */ 618 U8 MaxPhysDisksPerVol; /* 0x69 */ 619 U8 MaxPhysDisks; /* 0x6A */ 620 U8 MaxVolumes; /* 0x6B */ 621} MPI2_CONFIG_PAGE_MAN_4, 622 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4, 623 Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t; 624 625#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) 626 627/* Manufacturing Page 4 Flags field */ 628#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) 629#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) 630 631#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) 632#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) 633#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) 634 635#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) 636#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) 637#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) 638#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) 639#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) 640 641#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) 642#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) 643#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) 644#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) 645 646#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) 647#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) 648#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) 649#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) 650#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) 651#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) 652#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) 653#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) 654 655 656/* Manufacturing Page 5 */ 657 658/* 659 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 660 * one and check the value returned for NumPhys at runtime. 661 */ 662#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES 663#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) 664#endif 665 666typedef struct _MPI2_MANUFACTURING5_ENTRY 667{ 668 U64 WWID; /* 0x00 */ 669 U64 DeviceName; /* 0x08 */ 670} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY, 671 Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t; 672 673typedef struct _MPI2_CONFIG_PAGE_MAN_5 674{ 675 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 676 U8 NumPhys; /* 0x04 */ 677 U8 Reserved1; /* 0x05 */ 678 U16 Reserved2; /* 0x06 */ 679 U32 Reserved3; /* 0x08 */ 680 U32 Reserved4; /* 0x0C */ 681 MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */ 682} MPI2_CONFIG_PAGE_MAN_5, 683 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5, 684 Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t; 685 686#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) 687 688 689/* Manufacturing Page 6 */ 690 691typedef struct _MPI2_CONFIG_PAGE_MAN_6 692{ 693 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 694 U32 ProductSpecificInfo;/* 0x04 */ 695} MPI2_CONFIG_PAGE_MAN_6, 696 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6, 697 Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t; 698 699#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) 700 701 702/* Manufacturing Page 7 */ 703 704typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO 705{ 706 U32 Pinout; /* 0x00 */ 707 U8 Connector[16]; /* 0x04 */ 708 U8 Location; /* 0x14 */ 709 U8 ReceptacleID; /* 0x15 */ 710 U16 Slot; /* 0x16 */ 711 U32 Reserved2; /* 0x18 */ 712} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, 713 Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; 714 715/* defines for the Pinout field */ 716#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) 717#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) 718 719#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) 720#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) 721#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) 722#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) 723#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) 724#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) 725#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) 726#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) 727#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) 728#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) 729#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) 730#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) 731#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) 732#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) 733#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) 734 735/* defines for the Location field */ 736#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) 737#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) 738#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) 739#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) 740#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) 741#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) 742#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) 743 744/* 745 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 746 * one and check the value returned for NumPhys at runtime. 747 */ 748#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX 749#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) 750#endif 751 752typedef struct _MPI2_CONFIG_PAGE_MAN_7 753{ 754 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 755 U32 Reserved1; /* 0x04 */ 756 U32 Reserved2; /* 0x08 */ 757 U32 Flags; /* 0x0C */ 758 U8 EnclosureName[16]; /* 0x10 */ 759 U8 NumPhys; /* 0x20 */ 760 U8 Reserved3; /* 0x21 */ 761 U16 Reserved4; /* 0x22 */ 762 MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */ 763} MPI2_CONFIG_PAGE_MAN_7, 764 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, 765 Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; 766 767#define MPI2_MANUFACTURING7_PAGEVERSION (0x01) 768 769/* defines for the Flags field */ 770#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008) 771#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) 772#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) 773 774 775/* 776 * Generic structure to use for product-specific manufacturing pages 777 * (currently Manufacturing Page 8 through Manufacturing Page 31). 778 */ 779 780typedef struct _MPI2_CONFIG_PAGE_MAN_PS 781{ 782 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 783 U32 ProductSpecificInfo;/* 0x04 */ 784} MPI2_CONFIG_PAGE_MAN_PS, 785 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS, 786 Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t; 787 788#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) 789#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) 790#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) 791#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) 792#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) 793#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) 794#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) 795#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) 796#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) 797#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) 798#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) 799#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) 800#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) 801#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) 802#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) 803#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) 804#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) 805#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) 806#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) 807#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) 808#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) 809#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) 810#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) 811#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) 812 813 814/**************************************************************************** 815* IO Unit Config Pages 816****************************************************************************/ 817 818/* IO Unit Page 0 */ 819 820typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 821{ 822 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 823 U64 UniqueValue; /* 0x04 */ 824 MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */ 825 MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */ 826} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, 827 Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t; 828 829#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) 830 831 832/* IO Unit Page 1 */ 833 834typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 835{ 836 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 837 U32 Flags; /* 0x04 */ 838} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, 839 Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t; 840 841#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) 842 843/* IO Unit Page 1 Flags defines */ 844#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) 845#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) 846#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) 847#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) 848#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) 849#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) 850#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) 851#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) 852#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) 853#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) 854#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) 855#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) 856#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) 857 858 859/* IO Unit Page 3 */ 860 861/* 862 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 863 * one and check the value returned for GPIOCount at runtime. 864 */ 865#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX 866#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) 867#endif 868 869typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 870{ 871 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 872 U8 GPIOCount; /* 0x04 */ 873 U8 Reserved1; /* 0x05 */ 874 U16 Reserved2; /* 0x06 */ 875 U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */ 876} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, 877 Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t; 878 879#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) 880 881/* defines for IO Unit Page 3 GPIOVal field */ 882#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) 883#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) 884#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) 885#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) 886 887 888/* IO Unit Page 5 */ 889 890/* 891 * Upper layer code (drivers, utilities, etc.) should leave this define set to 892 * one and check the value returned for NumDmaEngines at runtime. 893 */ 894#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES 895#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) 896#endif 897 898typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 899{ 900 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 901 U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */ 902 U64 RaidAcceleratorBufferSize; /* 0x0C */ 903 U64 RaidAcceleratorControlBaseAddress; /* 0x14 */ 904 U8 RAControlSize; /* 0x1C */ 905 U8 NumDmaEngines; /* 0x1D */ 906 U8 RAMinControlSize; /* 0x1E */ 907 U8 RAMaxControlSize; /* 0x1F */ 908 U32 Reserved1; /* 0x20 */ 909 U32 Reserved2; /* 0x24 */ 910 U32 Reserved3; /* 0x28 */ 911 U32 DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */ 912} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, 913 Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t; 914 915#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) 916 917/* defines for IO Unit Page 5 DmaEngineCapabilities field */ 918#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000) 919#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) 920 921#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) 922#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) 923#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) 924#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) 925 926 927/* IO Unit Page 6 */ 928 929typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 930{ 931 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 932 U16 Flags; /* 0x04 */ 933 U8 RAHostControlSize; /* 0x06 */ 934 U8 Reserved0; /* 0x07 */ 935 U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */ 936 U32 Reserved1; /* 0x10 */ 937 U32 Reserved2; /* 0x14 */ 938 U32 Reserved3; /* 0x18 */ 939} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, 940 Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t; 941 942#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) 943 944/* defines for IO Unit Page 6 Flags field */ 945#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) 946 947 948/* IO Unit Page 7 */ 949 950typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 951{ 952 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 953 U8 CurrentPowerMode; /* 0x04 */ /* reserved in MPI 2.0 */ 954 U8 PreviousPowerMode; /* 0x05 */ /* reserved in MPI 2.0 */ 955 U8 PCIeWidth; /* 0x06 */ 956 U8 PCIeSpeed; /* 0x07 */ 957 U32 ProcessorState; /* 0x08 */ 958 U32 PowerManagementCapabilities; /* 0x0C */ 959 U16 IOCTemperature; /* 0x10 */ 960 U8 IOCTemperatureUnits; /* 0x12 */ 961 U8 IOCSpeed; /* 0x13 */ 962 U16 BoardTemperature; /* 0x14 */ 963 U8 BoardTemperatureUnits; /* 0x16 */ 964 U8 Reserved3; /* 0x17 */ 965 U32 Reserved4; /* 0x18 */ 966 U32 Reserved5; /* 0x1C */ 967 U32 Reserved6; /* 0x20 */ 968 U32 Reserved7; /* 0x24 */ 969} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, 970 Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; 971 972#define MPI2_IOUNITPAGE7_PAGEVERSION (0x04) 973 974/* defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ 975#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) 976#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00) 977#define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40) 978#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80) 979#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0) 980 981#define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07) 982#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00) 983#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01) 984#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04) 985#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05) 986#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06) 987 988 989/* defines for IO Unit Page 7 PCIeWidth field */ 990#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) 991#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) 992#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) 993#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) 994 995/* defines for IO Unit Page 7 PCIeSpeed field */ 996#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) 997#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) 998#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) 999 1000/* defines for IO Unit Page 7 ProcessorState field */ 1001#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) 1002#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) 1003 1004#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) 1005#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) 1006#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) 1007 1008/* defines for IO Unit Page 7 PowerManagementCapabilities field */ 1009#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000) 1010#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000) 1011#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000) 1012#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000) 1013#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000) 1014#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000) 1015#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000) 1016#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000) 1017#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000) 1018#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400) 1019#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200) 1020#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100) 1021#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040) 1022#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020) 1023#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010) 1024#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008) /* obsolete */ 1025#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004) /* obsolete */ 1026#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002) /* obsolete */ 1027#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001) /* obsolete */ 1028 1029/* obsolete names for the PowerManagementCapabilities bits (above) */ 1030#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) 1031#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) 1032#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) 1033#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /* obsolete */ 1034#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /* obsolete */ 1035 1036 1037/* defines for IO Unit Page 7 IOCTemperatureUnits field */ 1038#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) 1039#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) 1040#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) 1041 1042/* defines for IO Unit Page 7 IOCSpeed field */ 1043#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) 1044#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) 1045#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) 1046#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) 1047 1048/* defines for IO Unit Page 7 BoardTemperatureUnits field */ 1049#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) 1050#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) 1051#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) 1052 1053 1054/* IO Unit Page 8 */ 1055 1056#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) 1057 1058typedef struct _MPI2_IOUNIT8_SENSOR 1059{ 1060 U16 Flags; /* 0x00 */ 1061 U16 Reserved1; /* 0x02 */ 1062 U16 Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */ 1063 U32 Reserved2; /* 0x0C */ 1064 U32 Reserved3; /* 0x10 */ 1065 U32 Reserved4; /* 0x14 */ 1066} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR, 1067 Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t; 1068 1069/* defines for IO Unit Page 8 Sensor Flags field */ 1070#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) 1071#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) 1072#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) 1073#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) 1074 1075/* 1076 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1077 * one and check the value returned for NumSensors at runtime. 1078 */ 1079#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES 1080#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) 1081#endif 1082 1083typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 1084{ 1085 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1086 U32 Reserved1; /* 0x04 */ 1087 U32 Reserved2; /* 0x08 */ 1088 U8 NumSensors; /* 0x0C */ 1089 U8 PollingInterval; /* 0x0D */ 1090 U16 Reserved3; /* 0x0E */ 1091 MPI2_IOUNIT8_SENSOR Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */ 1092} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, 1093 Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t; 1094 1095#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) 1096 1097 1098/* IO Unit Page 9 */ 1099 1100typedef struct _MPI2_IOUNIT9_SENSOR 1101{ 1102 U16 CurrentTemperature; /* 0x00 */ 1103 U16 Reserved1; /* 0x02 */ 1104 U8 Flags; /* 0x04 */ 1105 U8 Reserved2; /* 0x05 */ 1106 U16 Reserved3; /* 0x06 */ 1107 U32 Reserved4; /* 0x08 */ 1108 U32 Reserved5; /* 0x0C */ 1109} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR, 1110 Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t; 1111 1112/* defines for IO Unit Page 9 Sensor Flags field */ 1113#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) 1114 1115/* 1116 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1117 * one and check the value returned for NumSensors at runtime. 1118 */ 1119#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES 1120#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) 1121#endif 1122 1123typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 1124{ 1125 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1126 U32 Reserved1; /* 0x04 */ 1127 U32 Reserved2; /* 0x08 */ 1128 U8 NumSensors; /* 0x0C */ 1129 U8 Reserved4; /* 0x0D */ 1130 U16 Reserved3; /* 0x0E */ 1131 MPI2_IOUNIT9_SENSOR Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */ 1132} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, 1133 Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t; 1134 1135#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) 1136 1137 1138/* IO Unit Page 10 */ 1139 1140typedef struct _MPI2_IOUNIT10_FUNCTION 1141{ 1142 U8 CreditPercent; /* 0x00 */ 1143 U8 Reserved1; /* 0x01 */ 1144 U16 Reserved2; /* 0x02 */ 1145} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION, 1146 Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t; 1147 1148/* 1149 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1150 * one and check the value returned for NumFunctions at runtime. 1151 */ 1152#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES 1153#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) 1154#endif 1155 1156typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 1157{ 1158 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1159 U8 NumFunctions; /* 0x04 */ 1160 U8 Reserved1; /* 0x05 */ 1161 U16 Reserved2; /* 0x06 */ 1162 U32 Reserved3; /* 0x08 */ 1163 U32 Reserved4; /* 0x0C */ 1164 MPI2_IOUNIT10_FUNCTION Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES]; /* 0x10 */ 1165} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, 1166 Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t; 1167 1168#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) 1169 1170 1171 1172/**************************************************************************** 1173* IOC Config Pages 1174****************************************************************************/ 1175 1176/* IOC Page 0 */ 1177 1178typedef struct _MPI2_CONFIG_PAGE_IOC_0 1179{ 1180 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1181 U32 Reserved1; /* 0x04 */ 1182 U32 Reserved2; /* 0x08 */ 1183 U16 VendorID; /* 0x0C */ 1184 U16 DeviceID; /* 0x0E */ 1185 U8 RevisionID; /* 0x10 */ 1186 U8 Reserved3; /* 0x11 */ 1187 U16 Reserved4; /* 0x12 */ 1188 U32 ClassCode; /* 0x14 */ 1189 U16 SubsystemVendorID; /* 0x18 */ 1190 U16 SubsystemID; /* 0x1A */ 1191} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0, 1192 Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t; 1193 1194#define MPI2_IOCPAGE0_PAGEVERSION (0x02) 1195 1196 1197/* IOC Page 1 */ 1198 1199typedef struct _MPI2_CONFIG_PAGE_IOC_1 1200{ 1201 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1202 U32 Flags; /* 0x04 */ 1203 U32 CoalescingTimeout; /* 0x08 */ 1204 U8 CoalescingDepth; /* 0x0C */ 1205 U8 PCISlotNum; /* 0x0D */ 1206 U8 PCIBusNum; /* 0x0E */ 1207 U8 PCIDomainSegment; /* 0x0F */ 1208 U32 Reserved1; /* 0x10 */ 1209 U32 Reserved2; /* 0x14 */ 1210} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1, 1211 Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t; 1212 1213#define MPI2_IOCPAGE1_PAGEVERSION (0x05) 1214 1215/* defines for IOC Page 1 Flags field */ 1216#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) 1217 1218#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) 1219#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) 1220#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) 1221 1222/* IOC Page 6 */ 1223 1224typedef struct _MPI2_CONFIG_PAGE_IOC_6 1225{ 1226 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1227 U32 CapabilitiesFlags; /* 0x04 */ 1228 U8 MaxDrivesRAID0; /* 0x08 */ 1229 U8 MaxDrivesRAID1; /* 0x09 */ 1230 U8 MaxDrivesRAID1E; /* 0x0A */ 1231 U8 MaxDrivesRAID10; /* 0x0B */ 1232 U8 MinDrivesRAID0; /* 0x0C */ 1233 U8 MinDrivesRAID1; /* 0x0D */ 1234 U8 MinDrivesRAID1E; /* 0x0E */ 1235 U8 MinDrivesRAID10; /* 0x0F */ 1236 U32 Reserved1; /* 0x10 */ 1237 U8 MaxGlobalHotSpares; /* 0x14 */ 1238 U8 MaxPhysDisks; /* 0x15 */ 1239 U8 MaxVolumes; /* 0x16 */ 1240 U8 MaxConfigs; /* 0x17 */ 1241 U8 MaxOCEDisks; /* 0x18 */ 1242 U8 Reserved2; /* 0x19 */ 1243 U16 Reserved3; /* 0x1A */ 1244 U32 SupportedStripeSizeMapRAID0; /* 0x1C */ 1245 U32 SupportedStripeSizeMapRAID1E; /* 0x20 */ 1246 U32 SupportedStripeSizeMapRAID10; /* 0x24 */ 1247 U32 Reserved4; /* 0x28 */ 1248 U32 Reserved5; /* 0x2C */ 1249 U16 DefaultMetadataSize; /* 0x30 */ 1250 U16 Reserved6; /* 0x32 */ 1251 U16 MaxBadBlockTableEntries; /* 0x34 */ 1252 U16 Reserved7; /* 0x36 */ 1253 U32 IRNvsramVersion; /* 0x38 */ 1254} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, 1255 Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; 1256 1257#define MPI2_IOCPAGE6_PAGEVERSION (0x05) 1258 1259/* defines for IOC Page 6 CapabilitiesFlags */ 1260#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) 1261#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) 1262#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) 1263#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) 1264#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) 1265#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) 1266 1267 1268/* IOC Page 7 */ 1269 1270#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) 1271 1272typedef struct _MPI2_CONFIG_PAGE_IOC_7 1273{ 1274 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1275 U32 Reserved1; /* 0x04 */ 1276 U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ 1277 U16 SASBroadcastPrimitiveMasks; /* 0x18 */ 1278 U16 SASNotifyPrimitiveMasks; /* 0x1A */ 1279 U32 Reserved3; /* 0x1C */ 1280} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, 1281 Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; 1282 1283#define MPI2_IOCPAGE7_PAGEVERSION (0x02) 1284 1285 1286/* IOC Page 8 */ 1287 1288typedef struct _MPI2_CONFIG_PAGE_IOC_8 1289{ 1290 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1291 U8 NumDevsPerEnclosure; /* 0x04 */ 1292 U8 Reserved1; /* 0x05 */ 1293 U16 Reserved2; /* 0x06 */ 1294 U16 MaxPersistentEntries; /* 0x08 */ 1295 U16 MaxNumPhysicalMappedIDs; /* 0x0A */ 1296 U16 Flags; /* 0x0C */ 1297 U16 Reserved3; /* 0x0E */ 1298 U16 IRVolumeMappingFlags; /* 0x10 */ 1299 U16 Reserved4; /* 0x12 */ 1300 U32 Reserved5; /* 0x14 */ 1301} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8, 1302 Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t; 1303 1304#define MPI2_IOCPAGE8_PAGEVERSION (0x00) 1305 1306/* defines for IOC Page 8 Flags field */ 1307#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) 1308#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) 1309 1310#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) 1311#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) 1312#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) 1313 1314#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) 1315#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) 1316 1317/* defines for IOC Page 8 IRVolumeMappingFlags */ 1318#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) 1319#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) 1320#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) 1321 1322 1323/**************************************************************************** 1324* BIOS Config Pages 1325****************************************************************************/ 1326 1327/* BIOS Page 1 */ 1328 1329typedef struct _MPI2_CONFIG_PAGE_BIOS_1 1330{ 1331 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1332 U32 BiosOptions; /* 0x04 */ 1333 U32 IOCSettings; /* 0x08 */ 1334 U32 Reserved1; /* 0x0C */ 1335 U32 DeviceSettings; /* 0x10 */ 1336 U16 NumberOfDevices; /* 0x14 */ 1337 U16 UEFIVersion; /* 0x16 */ 1338 U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ 1339 U16 IOTimeoutSequential; /* 0x1A */ 1340 U16 IOTimeoutOther; /* 0x1C */ 1341 U16 IOTimeoutBlockDevicesRM; /* 0x1E */ 1342} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, 1343 Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; 1344 1345#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) 1346 1347/* values for BIOS Page 1 BiosOptions field */ 1348#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) 1349#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) 1350 1351#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) 1352#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) 1353#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) 1354#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) 1355 1356#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) 1357 1358/* values for BIOS Page 1 IOCSettings field */ 1359#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) 1360#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) 1361#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) 1362 1363#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) 1364#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) 1365#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) 1366#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) 1367 1368#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) 1369#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) 1370#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) 1371#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) 1372#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) 1373 1374#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) 1375 1376/* values for BIOS Page 1 DeviceSettings field */ 1377#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) 1378#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) 1379#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) 1380#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) 1381#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) 1382 1383/* defines for BIOS Page 1 UEFIVersion field */ 1384#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) 1385#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) 1386#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) 1387#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) 1388 1389 1390 1391/* BIOS Page 2 */ 1392 1393typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER 1394{ 1395 U32 Reserved1; /* 0x00 */ 1396 U32 Reserved2; /* 0x04 */ 1397 U32 Reserved3; /* 0x08 */ 1398 U32 Reserved4; /* 0x0C */ 1399 U32 Reserved5; /* 0x10 */ 1400 U32 Reserved6; /* 0x14 */ 1401} MPI2_BOOT_DEVICE_ADAPTER_ORDER, 1402 MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, 1403 Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t; 1404 1405typedef struct _MPI2_BOOT_DEVICE_SAS_WWID 1406{ 1407 U64 SASAddress; /* 0x00 */ 1408 U8 LUN[8]; /* 0x08 */ 1409 U32 Reserved1; /* 0x10 */ 1410 U32 Reserved2; /* 0x14 */ 1411} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID, 1412 Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t; 1413 1414typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT 1415{ 1416 U64 EnclosureLogicalID; /* 0x00 */ 1417 U32 Reserved1; /* 0x08 */ 1418 U32 Reserved2; /* 0x0C */ 1419 U16 SlotNumber; /* 0x10 */ 1420 U16 Reserved3; /* 0x12 */ 1421 U32 Reserved4; /* 0x14 */ 1422} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, 1423 MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, 1424 Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t; 1425 1426typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME 1427{ 1428 U64 DeviceName; /* 0x00 */ 1429 U8 LUN[8]; /* 0x08 */ 1430 U32 Reserved1; /* 0x10 */ 1431 U32 Reserved2; /* 0x14 */ 1432} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, 1433 Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t; 1434 1435typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE 1436{ 1437 MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; 1438 MPI2_BOOT_DEVICE_SAS_WWID SasWwid; 1439 MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; 1440 MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; 1441} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, 1442 Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t; 1443 1444typedef struct _MPI2_CONFIG_PAGE_BIOS_2 1445{ 1446 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1447 U32 Reserved1; /* 0x04 */ 1448 U32 Reserved2; /* 0x08 */ 1449 U32 Reserved3; /* 0x0C */ 1450 U32 Reserved4; /* 0x10 */ 1451 U32 Reserved5; /* 0x14 */ 1452 U32 Reserved6; /* 0x18 */ 1453 U8 ReqBootDeviceForm; /* 0x1C */ 1454 U8 Reserved7; /* 0x1D */ 1455 U16 Reserved8; /* 0x1E */ 1456 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */ 1457 U8 ReqAltBootDeviceForm; /* 0x38 */ 1458 U8 Reserved9; /* 0x39 */ 1459 U16 Reserved10; /* 0x3A */ 1460 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */ 1461 U8 CurrentBootDeviceForm; /* 0x58 */ 1462 U8 Reserved11; /* 0x59 */ 1463 U16 Reserved12; /* 0x5A */ 1464 MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */ 1465} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2, 1466 Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t; 1467 1468#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) 1469 1470/* values for BIOS Page 2 BootDeviceForm fields */ 1471#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) 1472#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) 1473#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) 1474#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) 1475#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) 1476 1477 1478/* BIOS Page 3 */ 1479 1480typedef struct _MPI2_ADAPTER_INFO 1481{ 1482 U8 PciBusNumber; /* 0x00 */ 1483 U8 PciDeviceAndFunctionNumber; /* 0x01 */ 1484 U16 AdapterFlags; /* 0x02 */ 1485} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO, 1486 Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t; 1487 1488#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) 1489#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) 1490 1491typedef struct _MPI2_CONFIG_PAGE_BIOS_3 1492{ 1493 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1494 U32 GlobalFlags; /* 0x04 */ 1495 U32 BiosVersion; /* 0x08 */ 1496 MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ 1497 U32 Reserved1; /* 0x1C */ 1498} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, 1499 Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; 1500 1501#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) 1502 1503/* values for BIOS Page 3 GlobalFlags */ 1504#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) 1505#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) 1506#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) 1507 1508#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) 1509#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) 1510#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) 1511#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) 1512 1513 1514/* BIOS Page 4 */ 1515 1516/* 1517 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1518 * one and check the value returned for NumPhys at runtime. 1519 */ 1520#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES 1521#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) 1522#endif 1523 1524typedef struct _MPI2_BIOS4_ENTRY 1525{ 1526 U64 ReassignmentWWID; /* 0x00 */ 1527 U64 ReassignmentDeviceName; /* 0x08 */ 1528} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY, 1529 Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t; 1530 1531typedef struct _MPI2_CONFIG_PAGE_BIOS_4 1532{ 1533 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1534 U8 NumPhys; /* 0x04 */ 1535 U8 Reserved1; /* 0x05 */ 1536 U16 Reserved2; /* 0x06 */ 1537 MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */ 1538} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4, 1539 Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t; 1540 1541#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) 1542 1543 1544/**************************************************************************** 1545* RAID Volume Config Pages 1546****************************************************************************/ 1547 1548/* RAID Volume Page 0 */ 1549 1550typedef struct _MPI2_RAIDVOL0_PHYS_DISK 1551{ 1552 U8 RAIDSetNum; /* 0x00 */ 1553 U8 PhysDiskMap; /* 0x01 */ 1554 U8 PhysDiskNum; /* 0x02 */ 1555 U8 Reserved; /* 0x03 */ 1556} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK, 1557 Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t; 1558 1559/* defines for the PhysDiskMap field */ 1560#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) 1561#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) 1562 1563typedef struct _MPI2_RAIDVOL0_SETTINGS 1564{ 1565 U16 Settings; /* 0x00 */ 1566 U8 HotSparePool; /* 0x01 */ 1567 U8 Reserved; /* 0x02 */ 1568} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS, 1569 Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t; 1570 1571/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ 1572#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) 1573#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) 1574#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) 1575#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) 1576#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) 1577#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) 1578#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) 1579#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) 1580 1581/* RAID Volume Page 0 VolumeSettings defines */ 1582#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) 1583#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) 1584 1585#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) 1586#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) 1587#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) 1588#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) 1589 1590/* 1591 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1592 * one and check the value returned for NumPhysDisks at runtime. 1593 */ 1594#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX 1595#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) 1596#endif 1597 1598typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 1599{ 1600 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1601 U16 DevHandle; /* 0x04 */ 1602 U8 VolumeState; /* 0x06 */ 1603 U8 VolumeType; /* 0x07 */ 1604 U32 VolumeStatusFlags; /* 0x08 */ 1605 MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */ 1606 U64 MaxLBA; /* 0x10 */ 1607 U32 StripeSize; /* 0x18 */ 1608 U16 BlockSize; /* 0x1C */ 1609 U16 Reserved1; /* 0x1E */ 1610 U8 SupportedPhysDisks; /* 0x20 */ 1611 U8 ResyncRate; /* 0x21 */ 1612 U16 DataScrubDuration; /* 0x22 */ 1613 U8 NumPhysDisks; /* 0x24 */ 1614 U8 Reserved2; /* 0x25 */ 1615 U8 Reserved3; /* 0x26 */ 1616 U8 InactiveStatus; /* 0x27 */ 1617 MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */ 1618} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, 1619 Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t; 1620 1621#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) 1622 1623/* values for RAID VolumeState */ 1624#define MPI2_RAID_VOL_STATE_MISSING (0x00) 1625#define MPI2_RAID_VOL_STATE_FAILED (0x01) 1626#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) 1627#define MPI2_RAID_VOL_STATE_ONLINE (0x03) 1628#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) 1629#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) 1630 1631/* values for RAID VolumeType */ 1632#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) 1633#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) 1634#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) 1635#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) 1636#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) 1637 1638/* values for RAID Volume Page 0 VolumeStatusFlags field */ 1639#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) 1640#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) 1641#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) 1642#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) 1643#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) 1644#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) 1645#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) 1646#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) 1647#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) 1648#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) 1649#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) 1650#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) 1651#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) 1652#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) 1653#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) 1654#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) 1655#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) 1656#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) 1657#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) 1658 1659/* values for RAID Volume Page 0 SupportedPhysDisks field */ 1660#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) 1661#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) 1662#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) 1663#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) 1664 1665/* values for RAID Volume Page 0 InactiveStatus field */ 1666#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) 1667#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) 1668#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) 1669#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) 1670#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) 1671#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) 1672#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) 1673 1674 1675/* RAID Volume Page 1 */ 1676 1677typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 1678{ 1679 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1680 U16 DevHandle; /* 0x04 */ 1681 U16 Reserved0; /* 0x06 */ 1682 U8 GUID[24]; /* 0x08 */ 1683 U8 Name[16]; /* 0x20 */ 1684 U64 WWID; /* 0x30 */ 1685 U32 Reserved1; /* 0x38 */ 1686 U32 Reserved2; /* 0x3C */ 1687} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, 1688 Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t; 1689 1690#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) 1691 1692 1693/**************************************************************************** 1694* RAID Physical Disk Config Pages 1695****************************************************************************/ 1696 1697/* RAID Physical Disk Page 0 */ 1698 1699typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS 1700{ 1701 U16 Reserved1; /* 0x00 */ 1702 U8 HotSparePool; /* 0x02 */ 1703 U8 Reserved2; /* 0x03 */ 1704} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS, 1705 Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t; 1706 1707/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ 1708 1709typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA 1710{ 1711 U8 VendorID[8]; /* 0x00 */ 1712 U8 ProductID[16]; /* 0x08 */ 1713 U8 ProductRevLevel[4]; /* 0x18 */ 1714 U8 SerialNum[32]; /* 0x1C */ 1715} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, 1716 MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, 1717 Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t; 1718 1719typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 1720{ 1721 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1722 U16 DevHandle; /* 0x04 */ 1723 U8 Reserved1; /* 0x06 */ 1724 U8 PhysDiskNum; /* 0x07 */ 1725 MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */ 1726 U32 Reserved2; /* 0x0C */ 1727 MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */ 1728 U32 Reserved3; /* 0x4C */ 1729 U8 PhysDiskState; /* 0x50 */ 1730 U8 OfflineReason; /* 0x51 */ 1731 U8 IncompatibleReason; /* 0x52 */ 1732 U8 PhysDiskAttributes; /* 0x53 */ 1733 U32 PhysDiskStatusFlags; /* 0x54 */ 1734 U64 DeviceMaxLBA; /* 0x58 */ 1735 U64 HostMaxLBA; /* 0x60 */ 1736 U64 CoercedMaxLBA; /* 0x68 */ 1737 U16 BlockSize; /* 0x70 */ 1738 U16 Reserved5; /* 0x72 */ 1739 U32 Reserved6; /* 0x74 */ 1740} MPI2_CONFIG_PAGE_RD_PDISK_0, 1741 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, 1742 Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t; 1743 1744#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) 1745 1746/* PhysDiskState defines */ 1747#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) 1748#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) 1749#define MPI2_RAID_PD_STATE_OFFLINE (0x02) 1750#define MPI2_RAID_PD_STATE_ONLINE (0x03) 1751#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) 1752#define MPI2_RAID_PD_STATE_DEGRADED (0x05) 1753#define MPI2_RAID_PD_STATE_REBUILDING (0x06) 1754#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) 1755 1756/* OfflineReason defines */ 1757#define MPI2_PHYSDISK0_ONLINE (0x00) 1758#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) 1759#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) 1760#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) 1761#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) 1762#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) 1763#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) 1764 1765/* IncompatibleReason defines */ 1766#define MPI2_PHYSDISK0_COMPATIBLE (0x00) 1767#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) 1768#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) 1769#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) 1770#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) 1771#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) 1772#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) 1773#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) 1774 1775/* PhysDiskAttributes defines */ 1776#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) 1777#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) 1778#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) 1779 1780#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) 1781#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) 1782#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) 1783 1784/* PhysDiskStatusFlags defines */ 1785#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) 1786#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) 1787#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) 1788#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) 1789#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) 1790#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) 1791#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) 1792#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) 1793 1794 1795/* RAID Physical Disk Page 1 */ 1796 1797/* 1798 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1799 * one and check the value returned for NumPhysDiskPaths at runtime. 1800 */ 1801#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX 1802#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) 1803#endif 1804 1805typedef struct _MPI2_RAIDPHYSDISK1_PATH 1806{ 1807 U16 DevHandle; /* 0x00 */ 1808 U16 Reserved1; /* 0x02 */ 1809 U64 WWID; /* 0x04 */ 1810 U64 OwnerWWID; /* 0x0C */ 1811 U8 OwnerIdentifier; /* 0x14 */ 1812 U8 Reserved2; /* 0x15 */ 1813 U16 Flags; /* 0x16 */ 1814} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH, 1815 Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t; 1816 1817/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ 1818#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) 1819#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) 1820#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) 1821 1822typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 1823{ 1824 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1825 U8 NumPhysDiskPaths; /* 0x04 */ 1826 U8 PhysDiskNum; /* 0x05 */ 1827 U16 Reserved1; /* 0x06 */ 1828 U32 Reserved2; /* 0x08 */ 1829 MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */ 1830} MPI2_CONFIG_PAGE_RD_PDISK_1, 1831 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, 1832 Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t; 1833 1834#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) 1835 1836 1837/**************************************************************************** 1838* values for fields used by several types of SAS Config Pages 1839****************************************************************************/ 1840 1841/* values for NegotiatedLinkRates fields */ 1842#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) 1843#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) 1844#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) 1845/* link rates used for Negotiated Physical and Logical Link Rate */ 1846#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) 1847#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) 1848#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) 1849#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) 1850#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) 1851#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) 1852#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) 1853#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) 1854#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) 1855#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) 1856#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) 1857 1858 1859/* values for AttachedPhyInfo fields */ 1860#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) 1861#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) 1862#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) 1863 1864#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) 1865#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) 1866#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) 1867#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) 1868#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) 1869#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) 1870#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) 1871#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) 1872#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) 1873#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) 1874 1875 1876/* values for PhyInfo fields */ 1877#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) 1878 1879#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) 1880#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) 1881#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) 1882#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) 1883#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) 1884 1885#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) 1886#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) 1887#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) 1888#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) 1889#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) 1890#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) 1891 1892#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) 1893#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) 1894#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) 1895#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) 1896#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) 1897#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) 1898#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) 1899#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) 1900#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) 1901#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) 1902 1903#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) 1904#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) 1905#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) 1906#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) 1907 1908#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) 1909#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) 1910 1911#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) 1912#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) 1913#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) 1914#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) 1915 1916 1917/* values for SAS ProgrammedLinkRate fields */ 1918#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) 1919#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) 1920#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) 1921#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) 1922#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) 1923#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) 1924#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) 1925#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) 1926#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) 1927#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) 1928#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) 1929#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) 1930 1931 1932/* values for SAS HwLinkRate fields */ 1933#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) 1934#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) 1935#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) 1936#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) 1937#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) 1938#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) 1939#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) 1940#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) 1941#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) 1942#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) 1943 1944 1945 1946/**************************************************************************** 1947* SAS IO Unit Config Pages 1948****************************************************************************/ 1949 1950/* SAS IO Unit Page 0 */ 1951 1952typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA 1953{ 1954 U8 Port; /* 0x00 */ 1955 U8 PortFlags; /* 0x01 */ 1956 U8 PhyFlags; /* 0x02 */ 1957 U8 NegotiatedLinkRate; /* 0x03 */ 1958 U32 ControllerPhyDeviceInfo;/* 0x04 */ 1959 U16 AttachedDevHandle; /* 0x08 */ 1960 U16 ControllerDevHandle; /* 0x0A */ 1961 U32 DiscoveryStatus; /* 0x0C */ 1962 U32 Reserved; /* 0x10 */ 1963} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, 1964 Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t; 1965 1966/* 1967 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1968 * one and check the value returned for NumPhys at runtime. 1969 */ 1970#ifndef MPI2_SAS_IOUNIT0_PHY_MAX 1971#define MPI2_SAS_IOUNIT0_PHY_MAX (1) 1972#endif 1973 1974typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 1975{ 1976 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 1977 U32 Reserved1; /* 0x08 */ 1978 U8 NumPhys; /* 0x0C */ 1979 U8 Reserved2; /* 0x0D */ 1980 U16 Reserved3; /* 0x0E */ 1981 MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */ 1982} MPI2_CONFIG_PAGE_SASIOUNIT_0, 1983 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, 1984 Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t; 1985 1986#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) 1987 1988/* values for SAS IO Unit Page 0 PortFlags */ 1989#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) 1990#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) 1991 1992/* values for SAS IO Unit Page 0 PhyFlags */ 1993#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) 1994#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) 1995 1996/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ 1997 1998/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ 1999 2000/* values for SAS IO Unit Page 0 DiscoveryStatus */ 2001#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 2002#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) 2003#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) 2004#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 2005#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) 2006#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 2007#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 2008#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) 2009#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 2010#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) 2011#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) 2012#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) 2013#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) 2014#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) 2015#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) 2016#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) 2017#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) 2018#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) 2019#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) 2020#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) 2021 2022 2023/* SAS IO Unit Page 1 */ 2024 2025typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA 2026{ 2027 U8 Port; /* 0x00 */ 2028 U8 PortFlags; /* 0x01 */ 2029 U8 PhyFlags; /* 0x02 */ 2030 U8 MaxMinLinkRate; /* 0x03 */ 2031 U32 ControllerPhyDeviceInfo; /* 0x04 */ 2032 U16 MaxTargetPortConnectTime; /* 0x08 */ 2033 U16 Reserved1; /* 0x0A */ 2034} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, 2035 Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t; 2036 2037/* 2038 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2039 * one and check the value returned for NumPhys at runtime. 2040 */ 2041#ifndef MPI2_SAS_IOUNIT1_PHY_MAX 2042#define MPI2_SAS_IOUNIT1_PHY_MAX (1) 2043#endif 2044 2045typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 2046{ 2047 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2048 U16 ControlFlags; /* 0x08 */ 2049 U16 SASNarrowMaxQueueDepth; /* 0x0A */ 2050 U16 AdditionalControlFlags; /* 0x0C */ 2051 U16 SASWideMaxQueueDepth; /* 0x0E */ 2052 U8 NumPhys; /* 0x10 */ 2053 U8 SATAMaxQDepth; /* 0x11 */ 2054 U8 ReportDeviceMissingDelay; /* 0x12 */ 2055 U8 IODeviceMissingDelay; /* 0x13 */ 2056 MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */ 2057} MPI2_CONFIG_PAGE_SASIOUNIT_1, 2058 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, 2059 Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t; 2060 2061#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) 2062 2063/* values for SAS IO Unit Page 1 ControlFlags */ 2064#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) 2065#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) 2066#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) /* MPI v2.0 only. Obsolete in MPI v2.5 and later. */ 2067#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) 2068 2069#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) 2070#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) 2071#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) 2072#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) 2073#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) 2074 2075#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) 2076#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) 2077#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) 2078#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) 2079#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) 2080#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) 2081#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) 2082#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) /* MPI v2.0 only. Obsolete in MPI v2.5 and later. */ 2083 2084/* values for SAS IO Unit Page 1 AdditionalControlFlags */ 2085#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) 2086#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) 2087#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) 2088#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) 2089#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) 2090#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) 2091#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) 2092#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) 2093 2094/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ 2095#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) 2096#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) 2097 2098/* values for SAS IO Unit Page 1 PortFlags */ 2099#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) 2100 2101/* values for SAS IO Unit Page 1 PhyFlags */ 2102#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) 2103#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) 2104 2105/* values for SAS IO Unit Page 1 MaxMinLinkRate */ 2106#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) 2107#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) 2108#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) 2109#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) 2110#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) 2111#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) 2112#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) 2113#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) 2114#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) 2115#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) 2116 2117/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ 2118 2119 2120/* SAS IO Unit Page 4 */ 2121 2122typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP 2123{ 2124 U8 MaxTargetSpinup; /* 0x00 */ 2125 U8 SpinupDelay; /* 0x01 */ 2126 U8 SpinupFlags; /* 0x02 */ 2127 U8 Reserved1; /* 0x03 */ 2128} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, 2129 Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; 2130 2131/* defines for SAS IO Unit Page 4 SpinupFlags */ 2132#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) 2133 2134 2135/* 2136 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2137 * one and check the value returned for NumPhys at runtime. 2138 */ 2139#ifndef MPI2_SAS_IOUNIT4_PHY_MAX 2140#define MPI2_SAS_IOUNIT4_PHY_MAX (4) 2141#endif 2142 2143typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 2144{ 2145 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2146 MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ 2147 U32 Reserved1; /* 0x18 */ 2148 U32 Reserved2; /* 0x1C */ 2149 U32 Reserved3; /* 0x20 */ 2150 U8 BootDeviceWaitTime; /* 0x24 */ 2151 U8 Reserved4; /* 0x25 */ 2152 U16 Reserved5; /* 0x26 */ 2153 U8 NumPhys; /* 0x28 */ 2154 U8 PEInitialSpinupDelay; /* 0x29 */ 2155 U8 PEReplyDelay; /* 0x2A */ 2156 U8 Flags; /* 0x2B */ 2157 U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */ 2158} MPI2_CONFIG_PAGE_SASIOUNIT_4, 2159 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, 2160 Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t; 2161 2162#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) 2163 2164/* defines for Flags field */ 2165#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) 2166 2167/* defines for PHY field */ 2168#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) 2169 2170 2171/* SAS IO Unit Page 5 */ 2172 2173typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS 2174{ 2175 U8 ControlFlags; /* 0x00 */ 2176 U8 PortWidthModGroup; /* 0x01 */ 2177 U16 InactivityTimerExponent; /* 0x02 */ 2178 U8 SATAPartialTimeout; /* 0x04 */ 2179 U8 Reserved2; /* 0x05 */ 2180 U8 SATASlumberTimeout; /* 0x06 */ 2181 U8 Reserved3; /* 0x07 */ 2182 U8 SASPartialTimeout; /* 0x08 */ 2183 U8 Reserved4; /* 0x09 */ 2184 U8 SASSlumberTimeout; /* 0x0A */ 2185 U8 Reserved5; /* 0x0B */ 2186} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, 2187 MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, 2188 Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t; 2189 2190/* defines for ControlFlags field */ 2191#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) 2192#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) 2193#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) 2194#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) 2195 2196/* defines for PortWidthModeGroup field */ 2197#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) 2198 2199/* defines for InactivityTimerExponent field */ 2200#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) 2201#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) 2202#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) 2203#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) 2204#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) 2205#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) 2206#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) 2207#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) 2208 2209#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) 2210#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) 2211#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) 2212#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) 2213#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) 2214#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) 2215#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) 2216#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) 2217 2218/* 2219 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2220 * one and check the value returned for NumPhys at runtime. 2221 */ 2222#ifndef MPI2_SAS_IOUNIT5_PHY_MAX 2223#define MPI2_SAS_IOUNIT5_PHY_MAX (1) 2224#endif 2225 2226typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 2227{ 2228 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2229 U8 NumPhys; /* 0x08 */ 2230 U8 Reserved1; /* 0x09 */ 2231 U16 Reserved2; /* 0x0A */ 2232 U32 Reserved3; /* 0x0C */ 2233 MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */ 2234} MPI2_CONFIG_PAGE_SASIOUNIT_5, 2235 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, 2236 Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t; 2237 2238#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) 2239 2240 2241/* SAS IO Unit Page 6 */ 2242 2243typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS 2244{ 2245 U8 CurrentStatus; /* 0x00 */ 2246 U8 CurrentModulation; /* 0x01 */ 2247 U8 CurrentUtilization; /* 0x02 */ 2248 U8 Reserved1; /* 0x03 */ 2249 U32 Reserved2; /* 0x04 */ 2250} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, 2251 MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, 2252 Mpi2SasIOUnit6PortWidthModGroupStatus_t, 2253 MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t; 2254 2255/* defines for CurrentStatus field */ 2256#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) 2257#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) 2258#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) 2259#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) 2260#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) 2261#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) 2262#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) 2263#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) 2264 2265/* defines for CurrentModulation field */ 2266#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) 2267#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) 2268#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) 2269#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) 2270 2271/* 2272 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2273 * one and check the value returned for NumGroups at runtime. 2274 */ 2275#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX 2276#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) 2277#endif 2278 2279typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 2280{ 2281 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2282 U32 Reserved1; /* 0x08 */ 2283 U32 Reserved2; /* 0x0C */ 2284 U8 NumGroups; /* 0x10 */ 2285 U8 Reserved3; /* 0x11 */ 2286 U16 Reserved4; /* 0x12 */ 2287 MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS 2288 PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */ 2289} MPI2_CONFIG_PAGE_SASIOUNIT_6, 2290 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, 2291 Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t; 2292 2293#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) 2294 2295 2296/* SAS IO Unit Page 7 */ 2297 2298typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS 2299{ 2300 U8 Flags; /* 0x00 */ 2301 U8 Reserved1; /* 0x01 */ 2302 U16 Reserved2; /* 0x02 */ 2303 U8 Threshold75Pct; /* 0x04 */ 2304 U8 Threshold50Pct; /* 0x05 */ 2305 U8 Threshold25Pct; /* 0x06 */ 2306 U8 Reserved3; /* 0x07 */ 2307} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, 2308 MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, 2309 Mpi2SasIOUnit7PortWidthModGroupSettings_t, 2310 MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t; 2311 2312/* defines for Flags field */ 2313#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) 2314 2315 2316/* 2317 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2318 * one and check the value returned for NumGroups at runtime. 2319 */ 2320#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX 2321#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) 2322#endif 2323 2324typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 2325{ 2326 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2327 U8 SamplingInterval; /* 0x08 */ 2328 U8 WindowLength; /* 0x09 */ 2329 U16 Reserved1; /* 0x0A */ 2330 U32 Reserved2; /* 0x0C */ 2331 U32 Reserved3; /* 0x10 */ 2332 U8 NumGroups; /* 0x14 */ 2333 U8 Reserved4; /* 0x15 */ 2334 U16 Reserved5; /* 0x16 */ 2335 MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS 2336 PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */ 2337} MPI2_CONFIG_PAGE_SASIOUNIT_7, 2338 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, 2339 Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t; 2340 2341#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) 2342 2343 2344/* SAS IO Unit Page 8 */ 2345 2346typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 2347{ 2348 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2349 U32 Reserved1; /* 0x08 */ 2350 U32 PowerManagementCapabilities; /* 0x0C */ 2351 U8 TxRxSleepStatus; /* 0x10 */ /* reserved in MPI 2.0 */ 2352 U8 Reserved2; /* 0x11 */ 2353 U16 Reserved3; /* 0x12 */ 2354} MPI2_CONFIG_PAGE_SASIOUNIT_8, 2355 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, 2356 Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t; 2357 2358#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) 2359 2360/* defines for PowerManagementCapabilities field */ 2361#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) 2362#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) 2363#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) 2364#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) 2365#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) 2366#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) 2367#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) 2368#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) 2369#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) 2370#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) 2371 2372/* defines for TxRxSleepStatus field */ 2373#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00) 2374#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01) 2375#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02) 2376#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03) 2377 2378 2379 2380/* SAS IO Unit Page 16 */ 2381 2382typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 2383{ 2384 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2385 U64 TimeStamp; /* 0x08 */ 2386 U32 Reserved1; /* 0x10 */ 2387 U32 Reserved2; /* 0x14 */ 2388 U32 FastPathPendedRequests; /* 0x18 */ 2389 U32 FastPathUnPendedRequests; /* 0x1C */ 2390 U32 FastPathHostRequestStarts; /* 0x20 */ 2391 U32 FastPathFirmwareRequestStarts; /* 0x24 */ 2392 U32 FastPathHostCompletions; /* 0x28 */ 2393 U32 FastPathFirmwareCompletions; /* 0x2C */ 2394 U32 NonFastPathRequestStarts; /* 0x30 */ 2395 U32 NonFastPathHostCompletions; /* 0x30 */ 2396} MPI2_CONFIG_PAGE_SASIOUNIT16, 2397 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, 2398 Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t; 2399 2400#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) 2401 2402 2403/**************************************************************************** 2404* SAS Expander Config Pages 2405****************************************************************************/ 2406 2407/* SAS Expander Page 0 */ 2408 2409typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 2410{ 2411 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2412 U8 PhysicalPort; /* 0x08 */ 2413 U8 ReportGenLength; /* 0x09 */ 2414 U16 EnclosureHandle; /* 0x0A */ 2415 U64 SASAddress; /* 0x0C */ 2416 U32 DiscoveryStatus; /* 0x14 */ 2417 U16 DevHandle; /* 0x18 */ 2418 U16 ParentDevHandle; /* 0x1A */ 2419 U16 ExpanderChangeCount; /* 0x1C */ 2420 U16 ExpanderRouteIndexes; /* 0x1E */ 2421 U8 NumPhys; /* 0x20 */ 2422 U8 SASLevel; /* 0x21 */ 2423 U16 Flags; /* 0x22 */ 2424 U16 STPBusInactivityTimeLimit; /* 0x24 */ 2425 U16 STPMaxConnectTimeLimit; /* 0x26 */ 2426 U16 STP_SMP_NexusLossTime; /* 0x28 */ 2427 U16 MaxNumRoutedSasAddresses; /* 0x2A */ 2428 U64 ActiveZoneManagerSASAddress;/* 0x2C */ 2429 U16 ZoneLockInactivityLimit; /* 0x34 */ 2430 U16 Reserved1; /* 0x36 */ 2431 U8 TimeToReducedFunc; /* 0x38 */ 2432 U8 InitialTimeToReducedFunc; /* 0x39 */ 2433 U8 MaxReducedFuncTime; /* 0x3A */ 2434 U8 Reserved2; /* 0x3B */ 2435} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, 2436 Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; 2437 2438#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) 2439 2440/* values for SAS Expander Page 0 DiscoveryStatus field */ 2441#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 2442#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) 2443#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) 2444#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 2445#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) 2446#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 2447#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 2448#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) 2449#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 2450#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) 2451#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) 2452#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) 2453#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) 2454#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) 2455#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) 2456#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) 2457#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) 2458#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) 2459#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) 2460#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) 2461 2462/* values for SAS Expander Page 0 Flags field */ 2463#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) 2464#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) 2465#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) 2466#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) 2467#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) 2468#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) 2469#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) 2470#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) 2471#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) 2472#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) 2473#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) 2474 2475 2476/* SAS Expander Page 1 */ 2477 2478typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 2479{ 2480 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2481 U8 PhysicalPort; /* 0x08 */ 2482 U8 Reserved1; /* 0x09 */ 2483 U16 Reserved2; /* 0x0A */ 2484 U8 NumPhys; /* 0x0C */ 2485 U8 Phy; /* 0x0D */ 2486 U16 NumTableEntriesProgrammed; /* 0x0E */ 2487 U8 ProgrammedLinkRate; /* 0x10 */ 2488 U8 HwLinkRate; /* 0x11 */ 2489 U16 AttachedDevHandle; /* 0x12 */ 2490 U32 PhyInfo; /* 0x14 */ 2491 U32 AttachedDeviceInfo; /* 0x18 */ 2492 U16 ExpanderDevHandle; /* 0x1C */ 2493 U8 ChangeCount; /* 0x1E */ 2494 U8 NegotiatedLinkRate; /* 0x1F */ 2495 U8 PhyIdentifier; /* 0x20 */ 2496 U8 AttachedPhyIdentifier; /* 0x21 */ 2497 U8 Reserved3; /* 0x22 */ 2498 U8 DiscoveryInfo; /* 0x23 */ 2499 U32 AttachedPhyInfo; /* 0x24 */ 2500 U8 ZoneGroup; /* 0x28 */ 2501 U8 SelfConfigStatus; /* 0x29 */ 2502 U16 Reserved4; /* 0x2A */ 2503} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1, 2504 Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t; 2505 2506#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) 2507 2508/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ 2509 2510/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ 2511 2512/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ 2513 2514/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */ 2515 2516/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ 2517 2518/* values for SAS Expander Page 1 DiscoveryInfo field */ 2519#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) 2520#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) 2521#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) 2522 2523/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ 2524 2525 2526/**************************************************************************** 2527* SAS Device Config Pages 2528****************************************************************************/ 2529 2530/* SAS Device Page 0 */ 2531 2532typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 2533{ 2534 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2535 U16 Slot; /* 0x08 */ 2536 U16 EnclosureHandle; /* 0x0A */ 2537 U64 SASAddress; /* 0x0C */ 2538 U16 ParentDevHandle; /* 0x14 */ 2539 U8 PhyNum; /* 0x16 */ 2540 U8 AccessStatus; /* 0x17 */ 2541 U16 DevHandle; /* 0x18 */ 2542 U8 AttachedPhyIdentifier; /* 0x1A */ 2543 U8 ZoneGroup; /* 0x1B */ 2544 U32 DeviceInfo; /* 0x1C */ 2545 U16 Flags; /* 0x20 */ 2546 U8 PhysicalPort; /* 0x22 */ 2547 U8 MaxPortConnections; /* 0x23 */ 2548 U64 DeviceName; /* 0x24 */ 2549 U8 PortGroups; /* 0x2C */ 2550 U8 DmaGroup; /* 0x2D */ 2551 U8 ControlGroup; /* 0x2E */ 2552 U8 EnclosureLevel; /* 0x2F */ 2553 U8 ConnectorName[4]; /* 0x30 */ 2554 U32 Reserved3; /* 0x34 */ 2555} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, 2556 Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; 2557 2558#define MPI2_SASDEVICE0_PAGEVERSION (0x09) 2559 2560/* values for SAS Device Page 0 AccessStatus field */ 2561#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) 2562#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) 2563#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) 2564#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) 2565#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) 2566#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) 2567#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) 2568#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) 2569/* specific values for SATA Init failures */ 2570#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) 2571#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) 2572#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) 2573#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) 2574#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) 2575#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) 2576#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) 2577#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) 2578#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) 2579#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) 2580#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) 2581 2582/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ 2583 2584/* values for SAS Device Page 0 Flags field */ 2585#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) 2586#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000) 2587#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000) 2588#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) 2589#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) 2590#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) 2591#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) 2592#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) 2593#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) 2594#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) 2595#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) 2596#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) 2597#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) 2598#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) 2599#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) 2600 2601 2602/* SAS Device Page 1 */ 2603 2604typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 2605{ 2606 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2607 U32 Reserved1; /* 0x08 */ 2608 U64 SASAddress; /* 0x0C */ 2609 U32 Reserved2; /* 0x14 */ 2610 U16 DevHandle; /* 0x18 */ 2611 U16 Reserved3; /* 0x1A */ 2612 U8 InitialRegDeviceFIS[20];/* 0x1C */ 2613} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, 2614 Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t; 2615 2616#define MPI2_SASDEVICE1_PAGEVERSION (0x01) 2617 2618 2619/**************************************************************************** 2620* SAS PHY Config Pages 2621****************************************************************************/ 2622 2623/* SAS PHY Page 0 */ 2624 2625typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 2626{ 2627 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2628 U16 OwnerDevHandle; /* 0x08 */ 2629 U16 Reserved1; /* 0x0A */ 2630 U16 AttachedDevHandle; /* 0x0C */ 2631 U8 AttachedPhyIdentifier; /* 0x0E */ 2632 U8 Reserved2; /* 0x0F */ 2633 U32 AttachedPhyInfo; /* 0x10 */ 2634 U8 ProgrammedLinkRate; /* 0x14 */ 2635 U8 HwLinkRate; /* 0x15 */ 2636 U8 ChangeCount; /* 0x16 */ 2637 U8 Flags; /* 0x17 */ 2638 U32 PhyInfo; /* 0x18 */ 2639 U8 NegotiatedLinkRate; /* 0x1C */ 2640 U8 Reserved3; /* 0x1D */ 2641 U16 Reserved4; /* 0x1E */ 2642} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, 2643 Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t; 2644 2645#define MPI2_SASPHY0_PAGEVERSION (0x03) 2646 2647/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ 2648 2649/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ 2650 2651/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ 2652 2653/* values for SAS PHY Page 0 Flags field */ 2654#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) 2655 2656/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ 2657 2658/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ 2659 2660 2661/* SAS PHY Page 1 */ 2662 2663typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 2664{ 2665 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2666 U32 Reserved1; /* 0x08 */ 2667 U32 InvalidDwordCount; /* 0x0C */ 2668 U32 RunningDisparityErrorCount; /* 0x10 */ 2669 U32 LossDwordSynchCount; /* 0x14 */ 2670 U32 PhyResetProblemCount; /* 0x18 */ 2671} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, 2672 Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t; 2673 2674#define MPI2_SASPHY1_PAGEVERSION (0x01) 2675 2676 2677/* SAS PHY Page 2 */ 2678 2679typedef struct _MPI2_SASPHY2_PHY_EVENT 2680{ 2681 U8 PhyEventCode; /* 0x00 */ 2682 U8 Reserved1; /* 0x01 */ 2683 U16 Reserved2; /* 0x02 */ 2684 U32 PhyEventInfo; /* 0x04 */ 2685} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT, 2686 Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t; 2687 2688/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ 2689 2690 2691/* 2692 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2693 * one and check the value returned for NumPhyEvents at runtime. 2694 */ 2695#ifndef MPI2_SASPHY2_PHY_EVENT_MAX 2696#define MPI2_SASPHY2_PHY_EVENT_MAX (1) 2697#endif 2698 2699typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 2700{ 2701 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2702 U32 Reserved1; /* 0x08 */ 2703 U8 NumPhyEvents; /* 0x0C */ 2704 U8 Reserved2; /* 0x0D */ 2705 U16 Reserved3; /* 0x0E */ 2706 MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /* 0x10 */ 2707} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, 2708 Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t; 2709 2710#define MPI2_SASPHY2_PAGEVERSION (0x00) 2711 2712 2713/* SAS PHY Page 3 */ 2714 2715typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG 2716{ 2717 U8 PhyEventCode; /* 0x00 */ 2718 U8 Reserved1; /* 0x01 */ 2719 U16 Reserved2; /* 0x02 */ 2720 U8 CounterType; /* 0x04 */ 2721 U8 ThresholdWindow; /* 0x05 */ 2722 U8 TimeUnits; /* 0x06 */ 2723 U8 Reserved3; /* 0x07 */ 2724 U32 EventThreshold; /* 0x08 */ 2725 U16 ThresholdFlags; /* 0x0C */ 2726 U16 Reserved4; /* 0x0E */ 2727} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, 2728 Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t; 2729 2730/* values for PhyEventCode field */ 2731#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) 2732#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) 2733#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) 2734#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) 2735#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) 2736#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) 2737#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) 2738#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) 2739#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) 2740#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) 2741#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) 2742#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) 2743#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) 2744#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) 2745#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) 2746#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) 2747#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) 2748#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) 2749#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) 2750#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) 2751#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) 2752#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) 2753#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) 2754#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) 2755#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) 2756#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) 2757#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) 2758#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) 2759#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) 2760#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) 2761#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) 2762#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) 2763#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) 2764#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) 2765#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) 2766#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) 2767#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) 2768 2769/* values for the CounterType field */ 2770#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) 2771#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) 2772#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) 2773 2774/* values for the TimeUnits field */ 2775#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) 2776#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) 2777#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) 2778#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) 2779 2780/* values for the ThresholdFlags field */ 2781#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) 2782#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) 2783 2784/* 2785 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2786 * one and check the value returned for NumPhyEvents at runtime. 2787 */ 2788#ifndef MPI2_SASPHY3_PHY_EVENT_MAX 2789#define MPI2_SASPHY3_PHY_EVENT_MAX (1) 2790#endif 2791 2792typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 2793{ 2794 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2795 U32 Reserved1; /* 0x08 */ 2796 U8 NumPhyEvents; /* 0x0C */ 2797 U8 Reserved2; /* 0x0D */ 2798 U16 Reserved3; /* 0x0E */ 2799 MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */ 2800} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, 2801 Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t; 2802 2803#define MPI2_SASPHY3_PAGEVERSION (0x00) 2804 2805 2806/* SAS PHY Page 4 */ 2807 2808typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 2809{ 2810 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2811 U16 Reserved1; /* 0x08 */ 2812 U8 Reserved2; /* 0x0A */ 2813 U8 Flags; /* 0x0B */ 2814 U8 InitialFrame[28]; /* 0x0C */ 2815} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4, 2816 Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t; 2817 2818#define MPI2_SASPHY4_PAGEVERSION (0x00) 2819 2820/* values for the Flags field */ 2821#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02) 2822#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01) 2823 2824 2825 2826 2827/**************************************************************************** 2828* SAS Port Config Pages 2829****************************************************************************/ 2830 2831/* SAS Port Page 0 */ 2832 2833typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 2834{ 2835 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2836 U8 PortNumber; /* 0x08 */ 2837 U8 PhysicalPort; /* 0x09 */ 2838 U8 PortWidth; /* 0x0A */ 2839 U8 PhysicalPortWidth; /* 0x0B */ 2840 U8 ZoneGroup; /* 0x0C */ 2841 U8 Reserved1; /* 0x0D */ 2842 U16 Reserved2; /* 0x0E */ 2843 U64 SASAddress; /* 0x10 */ 2844 U32 DeviceInfo; /* 0x18 */ 2845 U32 Reserved3; /* 0x1C */ 2846 U32 Reserved4; /* 0x20 */ 2847} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, 2848 Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t; 2849 2850#define MPI2_SASPORT0_PAGEVERSION (0x00) 2851 2852/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ 2853 2854 2855/**************************************************************************** 2856* SAS Enclosure Config Pages 2857****************************************************************************/ 2858 2859/* SAS Enclosure Page 0 */ 2860 2861typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 2862{ 2863 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2864 U32 Reserved1; /* 0x08 */ 2865 U64 EnclosureLogicalID; /* 0x0C */ 2866 U16 Flags; /* 0x14 */ 2867 U16 EnclosureHandle; /* 0x16 */ 2868 U16 NumSlots; /* 0x18 */ 2869 U16 StartSlot; /* 0x1A */ 2870 U8 Reserved2; /* 0x1C */ 2871 U8 EnclosureLevel; /* 0x1D */ 2872 U16 SEPDevHandle; /* 0x1E */ 2873 U32 Reserved3; /* 0x20 */ 2874 U32 Reserved4; /* 0x24 */ 2875} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, 2876 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, 2877 Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; 2878 2879#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) 2880 2881/* values for SAS Enclosure Page 0 Flags field */ 2882#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) 2883#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) 2884#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) 2885#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) 2886#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) 2887#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) 2888#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) 2889#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) 2890 2891 2892/**************************************************************************** 2893* Log Config Page 2894****************************************************************************/ 2895 2896/* Log Page 0 */ 2897 2898/* 2899 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2900 * one and check the value returned for NumLogEntries at runtime. 2901 */ 2902#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES 2903#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) 2904#endif 2905 2906#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) 2907 2908typedef struct _MPI2_LOG_0_ENTRY 2909{ 2910 U64 TimeStamp; /* 0x00 */ 2911 U32 Reserved1; /* 0x08 */ 2912 U16 LogSequence; /* 0x0C */ 2913 U16 LogEntryQualifier; /* 0x0E */ 2914 U8 VP_ID; /* 0x10 */ 2915 U8 VF_ID; /* 0x11 */ 2916 U16 Reserved2; /* 0x12 */ 2917 U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */ 2918} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY, 2919 Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t; 2920 2921/* values for Log Page 0 LogEntry LogEntryQualifier field */ 2922#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) 2923#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) 2924#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) 2925#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) 2926#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) 2927 2928typedef struct _MPI2_CONFIG_PAGE_LOG_0 2929{ 2930 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2931 U32 Reserved1; /* 0x08 */ 2932 U32 Reserved2; /* 0x0C */ 2933 U16 NumLogEntries; /* 0x10 */ 2934 U16 Reserved3; /* 0x12 */ 2935 MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */ 2936} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0, 2937 Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t; 2938 2939#define MPI2_LOG_0_PAGEVERSION (0x02) 2940 2941 2942/**************************************************************************** 2943* RAID Config Page 2944****************************************************************************/ 2945 2946/* RAID Page 0 */ 2947 2948/* 2949 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2950 * one and check the value returned for NumElements at runtime. 2951 */ 2952#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS 2953#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) 2954#endif 2955 2956typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT 2957{ 2958 U16 ElementFlags; /* 0x00 */ 2959 U16 VolDevHandle; /* 0x02 */ 2960 U8 HotSparePool; /* 0x04 */ 2961 U8 PhysDiskNum; /* 0x05 */ 2962 U16 PhysDiskDevHandle; /* 0x06 */ 2963} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, 2964 MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, 2965 Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t; 2966 2967/* values for the ElementFlags field */ 2968#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) 2969#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) 2970#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) 2971#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) 2972#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) 2973 2974 2975typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 2976{ 2977 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2978 U8 NumHotSpares; /* 0x08 */ 2979 U8 NumPhysDisks; /* 0x09 */ 2980 U8 NumVolumes; /* 0x0A */ 2981 U8 ConfigNum; /* 0x0B */ 2982 U32 Flags; /* 0x0C */ 2983 U8 ConfigGUID[24]; /* 0x10 */ 2984 U32 Reserved1; /* 0x28 */ 2985 U8 NumElements; /* 0x2C */ 2986 U8 Reserved2; /* 0x2D */ 2987 U16 Reserved3; /* 0x2E */ 2988 MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */ 2989} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, 2990 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, 2991 Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t; 2992 2993#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) 2994 2995/* values for RAID Configuration Page 0 Flags field */ 2996#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) 2997 2998 2999/**************************************************************************** 3000* Driver Persistent Mapping Config Pages 3001****************************************************************************/ 3002 3003/* Driver Persistent Mapping Page 0 */ 3004 3005typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY 3006{ 3007 U64 PhysicalIdentifier; /* 0x00 */ 3008 U16 MappingInformation; /* 0x08 */ 3009 U16 DeviceIndex; /* 0x0A */ 3010 U32 PhysicalBitsMapping; /* 0x0C */ 3011 U32 Reserved1; /* 0x10 */ 3012} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, 3013 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, 3014 Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t; 3015 3016typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 3017{ 3018 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3019 MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */ 3020} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, 3021 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, 3022 Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t; 3023 3024#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) 3025 3026/* values for Driver Persistent Mapping Page 0 MappingInformation field */ 3027#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) 3028#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) 3029#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) 3030 3031 3032/**************************************************************************** 3033* Ethernet Config Pages 3034****************************************************************************/ 3035 3036/* Ethernet Page 0 */ 3037 3038/* IP address (union of IPv4 and IPv6) */ 3039typedef union _MPI2_ETHERNET_IP_ADDR 3040{ 3041 U32 IPv4Addr; 3042 U32 IPv6Addr[4]; 3043} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR, 3044 Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t; 3045 3046#define MPI2_ETHERNET_HOST_NAME_LENGTH (32) 3047 3048typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 3049{ 3050 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3051 U8 NumInterfaces; /* 0x08 */ 3052 U8 Reserved0; /* 0x09 */ 3053 U16 Reserved1; /* 0x0A */ 3054 U32 Status; /* 0x0C */ 3055 U8 MediaState; /* 0x10 */ 3056 U8 Reserved2; /* 0x11 */ 3057 U16 Reserved3; /* 0x12 */ 3058 U8 MacAddress[6]; /* 0x14 */ 3059 U8 Reserved4; /* 0x1A */ 3060 U8 Reserved5; /* 0x1B */ 3061 MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */ 3062 MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */ 3063 MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */ 3064 MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */ 3065 MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */ 3066 MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */ 3067 U8 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ 3068} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0, 3069 Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t; 3070 3071#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) 3072 3073/* values for Ethernet Page 0 Status field */ 3074#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) 3075#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) 3076#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) 3077#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) 3078#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) 3079#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) 3080#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) 3081#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) 3082#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) 3083#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) 3084#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) 3085#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) 3086 3087/* values for Ethernet Page 0 MediaState field */ 3088#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) 3089#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) 3090#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) 3091 3092#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) 3093#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) 3094#define MPI2_ETHPG0_MS_10MBIT (0x01) 3095#define MPI2_ETHPG0_MS_100MBIT (0x02) 3096#define MPI2_ETHPG0_MS_1GBIT (0x03) 3097 3098 3099/* Ethernet Page 1 */ 3100 3101typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 3102{ 3103 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3104 U32 Reserved0; /* 0x08 */ 3105 U32 Flags; /* 0x0C */ 3106 U8 MediaState; /* 0x10 */ 3107 U8 Reserved1; /* 0x11 */ 3108 U16 Reserved2; /* 0x12 */ 3109 U8 MacAddress[6]; /* 0x14 */ 3110 U8 Reserved3; /* 0x1A */ 3111 U8 Reserved4; /* 0x1B */ 3112 MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */ 3113 MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */ 3114 MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */ 3115 MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */ 3116 MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */ 3117 U32 Reserved5; /* 0x6C */ 3118 U32 Reserved6; /* 0x70 */ 3119 U32 Reserved7; /* 0x74 */ 3120 U32 Reserved8; /* 0x78 */ 3121 U8 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ 3122} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1, 3123 Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t; 3124 3125#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) 3126 3127/* values for Ethernet Page 1 Flags field */ 3128#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) 3129#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) 3130#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) 3131#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) 3132#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) 3133#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) 3134#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) 3135#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) 3136#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) 3137 3138/* values for Ethernet Page 1 MediaState field */ 3139#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) 3140#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) 3141#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) 3142 3143#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) 3144#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) 3145#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) 3146#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) 3147#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) 3148 3149 3150/**************************************************************************** 3151* Extended Manufacturing Config Pages 3152****************************************************************************/ 3153 3154/* 3155 * Generic structure to use for product-specific extended manufacturing pages 3156 * (currently Extended Manufacturing Page 40 through Extended Manufacturing 3157 * Page 60). 3158 */ 3159 3160typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS 3161{ 3162 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3163 U32 ProductSpecificInfo; /* 0x08 */ 3164} MPI2_CONFIG_PAGE_EXT_MAN_PS, 3165 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, 3166 Mpi2ExtManufacturingPagePS_t, MPI2_POINTER pMpi2ExtManufacturingPagePS_t; 3167 3168/* PageVersion should be provided by product-specific code */ 3169 3170#endif 3171 3172