1/* 2 * Copyright (c) 2009-2010 The FreeBSD Foundation 3 * All rights reserved. 4 * 5 * This software was developed by Semihalf under sponsorship from 6 * the FreeBSD Foundation. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * Marvell DB-88F6281 Device Tree Source. 30 * 31 * $FreeBSD: releng/10.3/sys/boot/fdt/dts/arm/db88f6281.dts 262614 2014-02-28 18:29:09Z imp $ 32 */ 33 34/dts-v1/; 35 36/ { 37 model = "mrvl,DB-88F6281"; 38 compatible = "DB-88F6281-BP", "DB-88F6281-BP-A"; 39 #address-cells = <1>; 40 #size-cells = <1>; 41 42 aliases { 43 ethernet0 = &enet0; 44 mpp = &MPP; 45 pci0 = &pci0; 46 serial0 = &serial0; 47 serial1 = &serial1; 48 soc = &SOC; 49 sram = &SRAM; 50 }; 51 52 cpus { 53 #address-cells = <1>; 54 #size-cells = <0>; 55 56 cpu@0 { 57 device_type = "cpu"; 58 compatible = "ARM,88FR131"; 59 reg = <0x0>; 60 d-cache-line-size = <32>; // 32 bytes 61 i-cache-line-size = <32>; // 32 bytes 62 d-cache-size = <0x4000>; // L1, 16K 63 i-cache-size = <0x4000>; // L1, 16K 64 timebase-frequency = <0>; 65 bus-frequency = <0>; 66 clock-frequency = <0>; 67 }; 68 }; 69 70 memory { 71 device_type = "memory"; 72 reg = <0x0 0x20000000>; // 512M at 0x0 73 }; 74 75 localbus@0 { 76 #address-cells = <2>; 77 #size-cells = <1>; 78 compatible = "mrvl,lbc"; 79 bank-count = <3>; 80 81 /* This reflects CPU decode windows setup. */ 82 ranges = <0x0 0x2f 0xf9300000 0x00100000>; 83 84 nand@0,0 { 85 #address-cells = <1>; 86 #size-cells = <1>; 87 compatible = "mrvl,nfc"; 88 reg = <0x0 0x0 0x00100000>; 89 bank-width = <2>; 90 device-width = <1>; 91 92 slice@0 { 93 reg = <0x0 0x200000>; 94 label = "u-boot"; 95 read-only; 96 }; 97 98 slice@200000 { 99 reg = <0x200000 0x7e00000>; 100 label = "root"; 101 }; 102 }; 103 }; 104 105 SOC: soc88f6281@f1000000 { 106 #address-cells = <1>; 107 #size-cells = <1>; 108 compatible = "simple-bus"; 109 ranges = <0x0 0xf1000000 0x00100000>; 110 bus-frequency = <0>; 111 112 PIC: pic@20200 { 113 interrupt-controller; 114 #address-cells = <0>; 115 #interrupt-cells = <1>; 116 reg = <0x20200 0x3c>; 117 compatible = "mrvl,pic"; 118 }; 119 120 timer@20300 { 121 compatible = "mrvl,timer"; 122 reg = <0x20300 0x30>; 123 interrupts = <1>; 124 interrupt-parent = <&PIC>; 125 mrvl,has-wdt; 126 }; 127 128 MPP: mpp@10000 { 129 #pin-cells = <2>; 130 compatible = "mrvl,mpp"; 131 reg = <0x10000 0x34>; 132 pin-count = <50>; 133 pin-map = < 134 0 1 /* MPP[0]: NF_IO[2] */ 135 1 1 /* MPP[1]: NF_IO[3] */ 136 2 1 /* MPP[2]: NF_IO[4] */ 137 3 1 /* MPP[3]: NF_IO[5] */ 138 4 1 /* MPP[4]: NF_IO[6] */ 139 5 1 /* MPP[5]: NF_IO[7] */ 140 6 1 /* MPP[6]: SYSRST_OUTn */ 141 7 2 /* MPP[7]: SPI_SCn */ 142 8 1 /* MPP[8]: TW_SDA */ 143 9 1 /* MPP[9]: TW_SCK */ 144 10 3 /* MPP[10]: UA0_TXD */ 145 11 3 /* MPP[11]: UA0_RXD */ 146 12 1 /* MPP[12]: SD_CLK */ 147 13 1 /* MPP[13]: SD_CMD */ 148 14 1 /* MPP[14]: SD_D[0] */ 149 15 1 /* MPP[15]: SD_D[1] */ 150 16 1 /* MPP[16]: SD_D[2] */ 151 17 1 /* MPP[17]: SD_D[3] */ 152 18 1 /* MPP[18]: NF_IO[0] */ 153 19 1 /* MPP[19]: NF_IO[1] */ 154 20 5 /* MPP[20]: SATA1_AC */ 155 21 5 >; /* MPP[21]: SATA0_AC */ 156 }; 157 158 GPIO: gpio@10100 { 159 #gpio-cells = <3>; 160 compatible = "mrvl,gpio"; 161 reg = <0x10100 0x20>; 162 gpio-controller; 163 interrupts = <35 36 37 38 39 40 41>; 164 interrupt-parent = <&PIC>; 165 }; 166 167 rtc@10300 { 168 compatible = "mrvl,rtc"; 169 reg = <0x10300 0x08>; 170 }; 171 172 twsi@11000 { 173 #address-cells = <1>; 174 #size-cells = <0>; 175 compatible = "mrvl,twsi"; 176 reg = <0x11000 0x20>; 177 interrupts = <43>; 178 interrupt-parent = <&PIC>; 179 }; 180 181 enet0: ethernet@72000 { 182 #address-cells = <1>; 183 #size-cells = <1>; 184 model = "V2"; 185 compatible = "mrvl,ge"; 186 reg = <0x72000 0x2000>; 187 ranges = <0x0 0x72000 0x2000>; 188 local-mac-address = [ 00 00 00 00 00 00 ]; 189 interrupts = <12 13 14 11 46>; 190 interrupt-parent = <&PIC>; 191 phy-handle = <&phy0>; 192 193 mdio@0 { 194 #address-cells = <1>; 195 #size-cells = <0>; 196 compatible = "mrvl,mdio"; 197 198 phy0: ethernet-phy@0 { 199 reg = <0x8>; 200 }; 201 }; 202 }; 203 204 serial0: serial@12000 { 205 compatible = "ns16550"; 206 reg = <0x12000 0x20>; 207 reg-shift = <2>; 208 clock-frequency = <0>; 209 interrupts = <33>; 210 interrupt-parent = <&PIC>; 211 }; 212 213 serial1: serial@12100 { 214 compatible = "ns16550"; 215 reg = <0x12100 0x20>; 216 reg-shift = <2>; 217 clock-frequency = <0>; 218 interrupts = <34>; 219 interrupt-parent = <&PIC>; 220 }; 221 222 crypto@30000 { 223 compatible = "mrvl,cesa"; 224 reg = <0x30000 0x10000>; 225 interrupts = <22>; 226 interrupt-parent = <&PIC>; 227 228 sram-handle = <&SRAM>; 229 }; 230 231 usb@50000 { 232 compatible = "mrvl,usb-ehci", "usb-ehci"; 233 reg = <0x50000 0x1000>; 234 interrupts = <48 19>; 235 interrupt-parent = <&PIC>; 236 }; 237 238 xor@60000 { 239 compatible = "mrvl,xor"; 240 reg = <0x60000 0x1000>; 241 interrupts = <5 6 7 8>; 242 interrupt-parent = <&PIC>; 243 }; 244 245 sata@80000 { 246 compatible = "mrvl,sata"; 247 reg = <0x80000 0x6000>; 248 interrupts = <21>; 249 interrupt-parent = <&PIC>; 250 }; 251 }; 252 253 SRAM: sram@fd000000 { 254 compatible = "mrvl,cesa-sram"; 255 reg = <0xfd000000 0x00100000>; 256 }; 257 258 pci0: pcie@f1040000 { 259 compatible = "mrvl,pcie"; 260 device_type = "pci"; 261 #interrupt-cells = <1>; 262 #size-cells = <2>; 263 #address-cells = <3>; 264 reg = <0xf1040000 0x2000>; 265 bus-range = <0 255>; 266 ranges = <0x02000000 0x0 0xf1300000 0xf1300000 0x0 0x04000000 267 0x01000000 0x0 0x00000000 0xf1100000 0x0 0x00100000>; 268 clock-frequency = <33333333>; 269 interrupt-parent = <&PIC>; 270 interrupts = <44>; 271 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 272 interrupt-map = < 273 /* IDSEL 0x1 */ 274 0x0800 0x0 0x0 0x1 &PIC 0x9 275 0x0800 0x0 0x0 0x2 &PIC 0x9 276 0x0800 0x0 0x0 0x3 &PIC 0x9 277 0x0800 0x0 0x0 0x4 &PIC 0x9 278 >; 279 pcie@0 { 280 reg = <0x0 0x0 0x0 0x0 0x0>; 281 #size-cells = <2>; 282 #address-cells = <3>; 283 device_type = "pci"; 284 ranges = <0x02000000 0x0 0xf1300000 285 0x02000000 0x0 0xf1300000 286 0x0 0x04000000 287 288 0x01000000 0x0 0x0 289 0x01000000 0x0 0x0 290 0x0 0x00100000>; 291 }; 292 }; 293 294 chosen { 295 stdin = "serial0"; 296 stdout = "serial0"; 297 }; 298}; 299