1# Kernel configuration to test compile all the atmel bits with one 2# configuration. This kernel will not (presently) boot. Do not copy 3# it to create your own custom config file. 4# 5# $FreeBSD: releng/10.3/sys/arm/conf/ATMEL 283930 2015-06-02 21:24:47Z imp $ 6 7ident ATMEL 8 9include "../at91/std.atmel" 10 11# Typical values for most SoCs and board configurations. Will not work for 12# at91sam9g45 or on some boards with non u-boot boot loaders. 13makeoptions KERNPHYSADDR=0x20000000 14makeoptions KERNVIRTADDR=0xc0000000 15options KERNPHYSADDR=0x20000000 16options KERNVIRTADDR=0xc0000000 17 18makeoptions MODULES_OVERRIDE="dtb/atmel" 19 20# list all boards here, but not just yet (no multiboard in mainline). 21options ARM_MANY_BOARD 22device at91_board_bwct 23device at91_board_ethernut5 24device at91_board_hl200 25device at91_board_hl201 26device at91_board_kb920x 27device at91_board_qila9g20 28device at91_board_sam9260ek 29device at91_board_sam9g20ek 30device at91_board_sam9x25ek 31device at91_board_sn9g45 32device at91_board_tsc4370 33 34#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols 35 36options SCHED_4BSD # 4BSD scheduler 37#options PREEMPTION # Enable kernel thread preemption 38options INET # InterNETworking 39options INET6 # IPv6 communications protocols 40options SCTP # Stream Control Transmission Protocol 41options FFS # Berkeley Fast Filesystem 42options SOFTUPDATES # Enable FFS soft updates support 43options UFS_ACL # Support for access control lists 44options UFS_DIRHASH # Improve performance on big directories 45options UFS_GJOURNAL # Enable gjournal-based UFS journaling 46options MD_ROOT # MD is a potential root device 47options NFSCL # New Network Filesystem Client 48options NFSD # New Network Filesystem Server 49options NFSLOCKD # Network Lock Manager 50options NFS_ROOT # NFS usable as /, requires NFSCL 51options TMPFS # Efficient memory filesystem 52options MSDOSFS # MSDOS Filesystem 53options CD9660 # ISO 9660 Filesystem 54options PROCFS # Process filesystem (requires PSEUDOFS) 55options PSEUDOFS # Pseudo-filesystem framework 56options GEOM_PART_BSD # BSD partition scheme 57options GEOM_PART_MBR # MBR partition scheme 58options GEOM_PART_GPT # GUID Partition Tables. 59options GEOM_LABEL # Provides labelization 60options COMPAT_FREEBSD5 # Compatible with FreeBSD5 61options COMPAT_FREEBSD6 # Compatible with FreeBSD6 62options COMPAT_FREEBSD7 # Compatible with FreeBSD7 63options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI 64options KTRACE # ktrace(1) support 65options STACK # stack(9) support 66options SYSVSHM # SYSV-style shared memory 67options SYSVMSG # SYSV-style message queues 68options SYSVSEM # SYSV-style semaphores 69options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions 70options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. 71#options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) 72#options AUDIT # Security event auditing 73#options CAPABILITY_MODE # Capsicum capability mode 74#options CAPABILITIES # Capsicum capabilities 75#options MAC # TrustedBSD MAC Framework 76#options INCLUDE_CONFIG_FILE # Include this file in kernel 77 78# required for netbooting 79options BOOTP 80options BOOTP_COMPAT 81options BOOTP_NFSROOT 82options BOOTP_NFSV3 83options BOOTP_WIRED_TO=ate0 84 85# alternatively, boot from a MMC/SD memory card 86#options ROOTDEVNAME=\"ufs:/dev/mmcsd0a\" 87 88# kernel/memory size reduction 89options MUTEX_NOINLINE 90options NO_FFS_SNAPSHOT 91options NO_SWAPPING 92options NO_SYSCTL_DESCR 93options RWLOCK_NOINLINE 94 95# Debugging support. Always need this: 96options KDB # Enable kernel debugger support. 97# For minimum debugger support (stable branch) use: 98options KDB_TRACE # Print a stack trace for a panic. 99# For full debugger support use this instead: 100options DDB # Support DDB. 101options GDB # Support remote GDB. 102#options DEADLKRES # Enable the deadlock resolver 103#options INVARIANTS # Enable calls of extra sanity checking 104#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS 105#options WITNESS # Enable checks to detect deadlocks and cycles 106#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed 107#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones 108 109# The `bpf' device enables the Berkeley Packet Filter. 110# Be aware of the administrative consequences of enabling this! 111# Note that 'bpf' is required for DHCP. 112device bpf # Berkeley packet filter 113 114# Ethernet 115device mii # Minimal MII support 116device ate # Atmel AT91 Ethernet friver 117 118# I2C 119device at91_twi # Atmel AT91 Two-wire Interface 120device iic # I2C generic I/O device driver 121device iicbus # I2C bus system 122device pcf8563 # NXP PCF8563 clock/calendar 123 124# MMC/SD 125device at91_mci # Atmel AT91 Multimedia Card Interface 126options AT91_MCI_HAS_4WIRE 127device mmc # MMC/SD bus 128device mmcsd # MMC/SD memory card 129 130# DataFlash 131device at91_spi # Atmel AT91 Serial Peripheral Interface 132device spibus # SPI bus 133device at45d # Atmel AT45D 134device geom_map # GEOM partition mapping 135 136# Pseudo devices. 137device loop # Network loopback 138device random # Entropy device 139device ether # Ethernet support 140device vlan # 802.1Q VLAN support 141device tun # Packet tunnel. 142device md # Memory "disks" 143device gif # IPv6 and IPv4 tunneling 144device faith # IPv6-to-IPv4 relaying (translation) 145#device firmware # firmware assist module 146 147# SCSI peripherals 148device scbus # SCSI bus (required for ATA/SCSI) 149device ch # SCSI media changers 150device da # Direct Access (disks) 151device sa # Sequential Access (tape etc) 152device cd # CD 153device pass # Passthrough device (direct ATA/SCSI access) 154device ses # Enclosure Services (SES and SAF-TE) 155#device ctl # CAM Target Layer 156 157# Serial (COM) ports 158device uart # Multi-uart driver 159options ALT_BREAK_TO_DEBUGGER 160 161# USB support 162options USB_DEBUG # enable debug msgs 163device ohci # OHCI USB interface 164device usb # USB Bus (required) 165device umass # Disks/Mass storage - Requires scbus and da 166 167# USB device (gadget) support 168device at91_dci # Atmel's usb device 169device usfs # emulate a flash 170device cdce # emulate an ethernet 171device usb_template # Control of the gadget 172 173# watchdog 174device at91_wdt # Atmel AT91 Watchdog Timer 175 176device at91_rtc 177device at91_ssc 178#device at91_tc # missing? 179 180# NAND Flash - Reference design has Samsung 256MB but others possible 181device nand # NAND interface on CS3 182