The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
4. Neither the name of the University nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
@(#)signal.3 8.3 (Berkeley) 4/19/94
$FreeBSD: releng/10.3/lib/libc/gen/signal.3 255171 2013-09-03 08:19:06Z rwatson $
.Dd June 7, 2004 .Dt SIGNAL 3 .Os .Sh NAME .Nm signal .Nd simplified software signal facilities .Sh LIBRARY .Lb libc .Sh SYNOPSIS n signal.h The following is Quite Ugly, but syntactically correct.
Don't try to fix it.
.Ft void .Fn \*(lp*signal "int sig" "void \*(lp*func\*(rp\*(lpint\*(rp\*(rp\*(rp\*(lpint"
p or in .Fx Ap s equivalent but easier to read typedef'd version: .Ft typedef "void \*(lp*sig_t\*(rp \*(lpint\*(rp" ;
p .Ft sig_t .Fn signal "int sig" "sig_t func" .Sh DESCRIPTION This .Fn signal facility is a simplified interface to the more general .Xr sigaction 2 facility.
p Signals allow the manipulation of a process from outside its domain as well as allowing the process to manipulate itself or copies of itself (children). There are two general types of signals: those that cause termination of a process and those that do not. Signals which cause termination of a program might result from an irrecoverable error or might be the result of a user at a terminal typing the `interrupt' character. Signals are used when a process is stopped because it wishes to access its control terminal while in the background (see .Xr tty 4 ) . Signals are optionally generated when a process resumes after being stopped, when the status of child processes changes, or when input is ready at the control terminal. Most signals result in the termination of the process receiving them if no action is taken; some signals instead cause the process receiving them to be stopped, or are simply discarded if the process has not requested otherwise. Except for the .Dv SIGKILL and .Dv SIGSTOP signals, the .Fn signal function allows for a signal to be caught, to be ignored, or to generate an interrupt. These signals are defined in the file n signal.h : l -column No ".Dv SIGVTALRM" "create core image" t Sy "Num" Ta Sy "Name" Ta Sy "Default Action" Ta Sy "Description" t 1 Ta Dv SIGHUP Ta "terminate process" Ta "terminal line hangup" t 2 Ta Dv SIGINT Ta "terminate process" Ta "interrupt program" t 3 Ta Dv SIGQUIT Ta "create core image" Ta "quit program" t 4 Ta Dv SIGILL Ta "create core image" Ta "illegal instruction" t 5 Ta Dv SIGTRAP Ta "create core image" Ta "trace trap" t 6 Ta Dv SIGABRT Ta "create core image" Ta "abort program" (formerly .Dv SIGIOT ) t 7 Ta Dv SIGEMT Ta "create core image" Ta "emulate instruction executed" t 8 Ta Dv SIGFPE Ta "create core image" Ta "floating-point exception" t 9 Ta Dv SIGKILL Ta "terminate process" Ta "kill program" t 10 Ta Dv SIGBUS Ta "create core image" Ta "bus error" t 11 Ta Dv SIGSEGV Ta "create core image" Ta "segmentation violation" t 12 Ta Dv SIGSYS Ta "create core image" Ta "non-existent system call invoked" t 13 Ta Dv SIGPIPE Ta "terminate process" Ta "write on a pipe with no reader" t 14 Ta Dv SIGALRM Ta "terminate process" Ta "real-time timer expired" t 15 Ta Dv SIGTERM Ta "terminate process" Ta "software termination signal" t 16 Ta Dv SIGURG Ta "discard signal" Ta "urgent condition present on socket" t 17 Ta Dv SIGSTOP Ta "stop process" Ta "stop (cannot be caught or ignored)" t 18 Ta Dv SIGTSTP Ta "stop process" Ta "stop signal generated from keyboard" t 19 Ta Dv SIGCONT Ta "discard signal" Ta "continue after stop" t 20 Ta Dv SIGCHLD Ta "discard signal" Ta "child status has changed" t 21 Ta Dv SIGTTIN Ta "stop process" Ta "background read attempted from" control terminal t 22 Ta Dv SIGTTOU Ta "stop process" Ta "background write attempted to" control terminal t 23 Ta Dv SIGIO Ta "discard signal" Ta Tn "I/O" is possible on a descriptor (see .Xr fcntl 2 ) t 24 Ta Dv SIGXCPU Ta "terminate process" Ta "cpu time limit exceeded (see" .Xr setrlimit 2 ) t 25 Ta Dv SIGXFSZ Ta "terminate process" Ta "file size limit exceeded (see" .Xr setrlimit 2 ) t 26 Ta Dv SIGVTALRM Ta "terminate process" Ta "virtual time alarm (see" .Xr setitimer 2 ) t 27 Ta Dv SIGPROF Ta "terminate process" Ta "profiling timer alarm (see" .Xr setitimer 2 ) t 28 Ta Dv SIGWINCH Ta "discard signal" Ta "Window size change" t 29 Ta Dv SIGINFO Ta "discard signal" Ta "status request from keyboard" t 30 Ta Dv SIGUSR1 Ta "terminate process" Ta "User defined signal 1" t 31 Ta Dv SIGUSR2 Ta "terminate process" Ta "User defined signal 2" t 32 Ta Dv SIGTHR Ta "terminate process" Ta "thread interrupt" t 33 Ta Dv SIGLIBRT Ta "terminate process" Ta "real-time library interrupt" .El
p The .Fa sig argument specifies which signal was received. The .Fa func procedure allows a user to choose the action upon receipt of a signal. To set the default action of the signal to occur as listed above, .Fa func should be .Dv SIG_DFL . A .Dv SIG_DFL resets the default action. To ignore the signal .Fa func should be .Dv SIG_IGN . This will cause subsequent instances of the signal to be ignored and pending instances to be discarded. If .Dv SIG_IGN is not used, further occurrences of the signal are automatically blocked and .Fa func is called.
p The handled signal is unblocked when the function returns and the process continues from where it left off when the signal occurred. f -symbolic Unlike previous signal facilities, the handler func() remains installed after a signal has been delivered. .Ef
p For some system calls, if a signal is caught while the call is executing and the call is prematurely terminated, the call is automatically restarted. Any handler installed with .Xr signal 3 will have the .Dv SA_RESTART flag set, meaning that any restartable system call will not return on receipt of a signal. The affected system calls include .Xr read 2 , .Xr write 2 , .Xr sendto 2 , .Xr recvfrom 2 , .Xr sendmsg 2 and .Xr recvmsg 2 on a communications channel or a low speed device and during a .Xr ioctl 2 or .Xr wait 2 . However, calls that have already committed are not restarted, but instead return a partial success (for example, a short read count). These semantics could be changed with .Xr siginterrupt 3 .
p When a process which has installed signal handlers forks, the child process inherits the signals. All caught signals may be reset to their default action by a call to the .Xr execve 2 function; ignored signals remain ignored.
p If a process explicitly specifies .Dv SIG_IGN as the action for the signal .Dv SIGCHLD , the system will not create zombie processes when children of the calling process exit. As a consequence, the system will discard the exit status from the child processes. If the calling process subsequently issues a call to .Xr wait 2 or equivalent, it will block until all of the calling process's children terminate, and then return a value of -1 with .Va errno set to .Er ECHILD .
p See .Xr sigaction 2 for a list of functions that are considered safe for use in signal handlers. .Sh RETURN VALUES The previous action is returned on a successful call. Otherwise, SIG_ERR is returned and the global variable .Va errno is set to indicate the error. .Sh ERRORS The .Fn signal function will fail and no action will take place if one of the following occur: l -tag -width Er t Bq Er EINVAL The .Fa sig argument is not a valid signal number. t Bq Er EINVAL An attempt is made to ignore or supply a handler for .Dv SIGKILL or .Dv SIGSTOP . .El .Sh SEE ALSO .Xr kill 1 , .Xr kill 2 , .Xr ptrace 2 , .Xr sigaction 2 , .Xr sigaltstack 2 , .Xr sigprocmask 2 , .Xr sigsuspend 2 , .Xr wait 2 , .Xr fpsetmask 3 , .Xr setjmp 3 , .Xr siginterrupt 3 , .Xr tty 4 .Sh HISTORY The .Nm facility appeared in x 4.0 . The option to avoid the creation of child zombies through ignoring .Dv SIGCHLD appeared in .Fx 5.0 .