if_atse_fdt.c revision 266152
1/*- 2 * Copyright (c) 2013 Bjoern A. Zeeb 3 * All rights reserved. 4 * 5 * This software was developed by SRI International and the University of 6 * Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-11-C-0249) 7 * ("MRC2"), as part of the DARPA MRC research programme. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30 31#include <sys/cdefs.h> 32__FBSDID("$FreeBSD: stable/10/sys/dev/altera/atse/if_atse_fdt.c 266152 2014-05-15 16:11:06Z ian $"); 33 34#include <sys/param.h> 35#include <sys/bus.h> 36#include <sys/kernel.h> 37#include <sys/module.h> 38#include <sys/rman.h> 39#include <sys/socket.h> 40#include <sys/systm.h> 41 42#include <machine/bus.h> 43#include <machine/resource.h> 44 45#include <net/ethernet.h> 46#include <net/if.h> 47#include <net/if_media.h> 48 49#include <dev/mii/mii.h> 50#include <dev/mii/miivar.h> 51 52 53#include <dev/fdt/fdt_common.h> 54#include <dev/ofw/openfirm.h> 55#include <dev/ofw/ofw_bus.h> 56#include <dev/ofw/ofw_bus_subr.h> 57 58#include <dev/altera/atse/if_atsereg.h> 59 60/* "device miibus" required. See GENERIC if you get errors here. */ 61#include "miibus_if.h" 62 63static int 64atse_probe_fdt(device_t dev) 65{ 66 67 if (!ofw_bus_status_okay(dev)) 68 return (ENXIO); 69 70 if (ofw_bus_is_compatible(dev, "altera,atse")) { 71 device_set_desc(dev, "Altera Triple-Speed Ethernet MegaCore"); 72 return (BUS_PROBE_DEFAULT); 73 } 74 return (ENXIO); 75} 76 77static int 78atse_attach_fdt(device_t dev) 79{ 80 struct atse_softc *sc; 81 int error; 82 83 sc = device_get_softc(dev); 84 sc->atse_dev = dev; 85 sc->atse_unit = device_get_unit(dev); 86 87 /* 88 * FDT has the list of our resources. Given we are using multiple 89 * memory regions and possibly multiple interrupts, we need to attach 90 * them in the order specified in .dts: 91 * MAC, RX and RXC FIFO, TX and TXC FIFO; RX INTR, TX INTR. 92 */ 93 94 /* MAC: Avalon-MM, atse management register region. */ 95 sc->atse_mem_rid = 0; 96 sc->atse_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 97 &sc->atse_mem_rid, RF_ACTIVE); 98 if (sc->atse_mem_res == NULL) { 99 device_printf(dev, "failed to map memory for ctrl region\n"); 100 error = ENXIO; 101 goto err; 102 } 103 if (bootverbose) 104 device_printf(sc->atse_dev, "MAC ctrl region at mem %p-%p\n", 105 (void *)rman_get_start(sc->atse_mem_res), 106 (void *)(rman_get_start(sc->atse_mem_res) + 107 rman_get_size(sc->atse_mem_res))); 108 109 /* 110 * RX and RXC FIFO memory regions. 111 * 0x00: 2 * 32bit FIFO data, 112 * 0x20: 8 * 32bit FIFO ctrl, Avalon-ST Sink to Avalon-MM R-Slave. 113 */ 114 sc->atse_rx_mem_rid = 1; 115 sc->atse_rx_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 116 &sc->atse_rx_mem_rid, RF_ACTIVE); 117 if (sc->atse_rx_mem_res == NULL) { 118 device_printf(dev, "failed to map memory for RX FIFO\n"); 119 error = ENXIO; 120 goto err; 121 } 122 if (bootverbose) 123 device_printf(sc->atse_dev, "RX FIFO at mem %p-%p\n", 124 (void *)rman_get_start(sc->atse_rx_mem_res), 125 (void *)(rman_get_start(sc->atse_rx_mem_res) + 126 rman_get_size(sc->atse_rx_mem_res))); 127 128 sc->atse_rxc_mem_rid = 2; 129 sc->atse_rxc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 130 &sc->atse_rxc_mem_rid, RF_ACTIVE); 131 if (sc->atse_rxc_mem_res == NULL) { 132 device_printf(dev, "failed to map memory for RXC FIFO\n"); 133 error = ENXIO; 134 goto err; 135 } 136 if (bootverbose) 137 device_printf(sc->atse_dev, "RXC FIFO at mem %p-%p\n", 138 (void *)rman_get_start(sc->atse_rxc_mem_res), 139 (void *)(rman_get_start(sc->atse_rxc_mem_res) + 140 rman_get_size(sc->atse_rxc_mem_res))); 141 142 /* 143 * TX and TXC FIFO memory regions. 144 * 0x00: 2 * 32bit FIFO data, 145 * 0x20: 8 * 32bit FIFO ctrl, Avalon-MM W-Slave to Avalon-ST Source. 146 */ 147 sc->atse_tx_mem_rid = 3; 148 sc->atse_tx_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 149 &sc->atse_tx_mem_rid, RF_ACTIVE); 150 if (sc->atse_tx_mem_res == NULL) { 151 device_printf(dev, "failed to map memory for TX FIFO\n"); 152 error = ENXIO; 153 goto err; 154 } 155 if (bootverbose) 156 device_printf(sc->atse_dev, "TX FIFO at mem %p-%p\n", 157 (void *)rman_get_start(sc->atse_tx_mem_res), 158 (void *)(rman_get_start(sc->atse_tx_mem_res) + 159 rman_get_size(sc->atse_tx_mem_res))); 160 161 sc->atse_txc_mem_rid = 4; 162 sc->atse_txc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 163 &sc->atse_txc_mem_rid, RF_ACTIVE); 164 if (sc->atse_txc_mem_res == NULL) { 165 device_printf(dev, "failed to map memory for TXC FIFO\n"); 166 error = ENXIO; 167 goto err; 168 } 169 if (bootverbose) 170 device_printf(sc->atse_dev, "TXC FIFO at mem %p-%p\n", 171 (void *)rman_get_start(sc->atse_txc_mem_res), 172 (void *)(rman_get_start(sc->atse_txc_mem_res) + 173 rman_get_size(sc->atse_txc_mem_res))); 174 175 /* (Optional) RX and TX IRQ. */ 176 sc->atse_rx_irq_rid = 0; 177 sc->atse_rx_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, 178 &sc->atse_rx_irq_rid, RF_ACTIVE | RF_SHAREABLE); 179 sc->atse_tx_irq_rid = 1; 180 sc->atse_tx_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, 181 &sc->atse_tx_irq_rid, RF_ACTIVE | RF_SHAREABLE); 182 183 error = atse_attach(dev); 184 if (error) 185 goto err; 186 187 return (0); 188 189err: 190 /* Cleanup. */ 191 atse_detach_resources(dev); 192 193 return (error); 194} 195 196static device_method_t atse_methods_fdt[] = { 197 /* Device interface */ 198 DEVMETHOD(device_probe, atse_probe_fdt), 199 DEVMETHOD(device_attach, atse_attach_fdt), 200 DEVMETHOD(device_detach, atse_detach_dev), 201 202 /* MII interface */ 203 DEVMETHOD(miibus_readreg, atse_miibus_readreg), 204 DEVMETHOD(miibus_writereg, atse_miibus_writereg), 205 DEVMETHOD(miibus_statchg, atse_miibus_statchg), 206 207 DEVMETHOD_END 208}; 209 210static driver_t atse_driver_fdt = { 211 "atse", 212 atse_methods_fdt, 213 sizeof(struct atse_softc) 214}; 215 216DRIVER_MODULE(atse, simplebus, atse_driver_fdt, atse_devclass, 0, 0); 217DRIVER_MODULE(miibus, atse, miibus_driver, miibus_devclass, 0, 0); 218 219/* end */ 220