1/*- 2 * Copyright (c) 2008 Stanislav Sedov <stas@FreeBSD.org>. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 * 25 * $FreeBSD: releng/10.2/sys/dev/ae/if_aereg.h 253406 2013-07-17 01:34:25Z yongari $ 26 */ 27 28/* 29 * Master configuration register 30 */ 31#define AE_MASTER_REG 0x1400 32 33#define AE_MASTER_SOFT_RESET 0x1 /* Reset adapter. */ 34#define AE_MASTER_MTIMER_EN 0x2 /* Unknown. */ 35#define AE_MASTER_IMT_EN 0x4 /* Interrupt moderation timer enable. */ 36#define AE_MASTER_MANUAL_INT 0x8 /* Software manual interrupt. */ 37#define AE_MASTER_REVNUM_SHIFT 16 /* Chip revision number. */ 38#define AE_MASTER_REVNUM_MASK 0xff 39#define AE_MASTER_DEVID_SHIFT 24 /* PCI device id. */ 40#define AE_MASTER_DEVID_MASK 0xff 41 42/* 43 * Interrupt status register 44 */ 45#define AE_ISR_REG 0x1600 46#define AE_ISR_TIMER 0x00000001 /* Counter expired. */ 47#define AE_ISR_MANUAL 0x00000002 /* Manual interrupt occuried. */ 48#define AE_ISR_RXF_OVERFLOW 0x00000004 /* RxF overflow occuried. */ 49#define AE_ISR_TXF_UNDERRUN 0x00000008 /* TxF underrun occuried. */ 50#define AE_ISR_TXS_OVERFLOW 0x00000010 /* TxS overflow occuried. */ 51#define AE_ISR_RXS_OVERFLOW 0x00000020 /* Internal RxS ring overflow. */ 52#define AE_ISR_LINK_CHG 0x00000040 /* Link state changed. */ 53#define AE_ISR_TXD_UNDERRUN 0x00000080 /* TxD underrun occuried. */ 54#define AE_ISR_RXD_OVERFLOW 0x00000100 /* RxD overflow occuried. */ 55#define AE_ISR_DMAR_TIMEOUT 0x00000200 /* DMA read timeout. */ 56#define AE_ISR_DMAW_TIMEOUT 0x00000400 /* DMA write timeout. */ 57#define AE_ISR_PHY 0x00000800 /* PHY interrupt. */ 58#define AE_ISR_TXS_UPDATED 0x00010000 /* Tx status updated. */ 59#define AE_ISR_RXD_UPDATED 0x00020000 /* Rx status updated. */ 60#define AE_ISR_TX_EARLY 0x00040000 /* TxMAC started transmit. */ 61#define AE_ISR_FIFO_UNDERRUN 0x01000000 /* FIFO underrun. */ 62#define AE_ISR_FRAME_ERROR 0x02000000 /* Frame receive error. */ 63#define AE_ISR_FRAME_SUCCESS 0x04000000 /* Frame receive success. */ 64#define AE_ISR_CRC_ERROR 0x08000000 /* CRC error occuried. */ 65#define AE_ISR_PHY_LINKDOWN 0x10000000 /* PHY link down. */ 66#define AE_ISR_DISABLE 0x80000000 /* Disable interrupts. */ 67 68#define AE_ISR_TX_EVENT (AE_ISR_TXF_UNDERRUN | AE_ISR_TXS_OVERFLOW | \ 69 AE_ISR_TXD_UNDERRUN | AE_ISR_TXS_UPDATED | \ 70 AE_ISR_TX_EARLY) 71#define AE_ISR_RX_EVENT (AE_ISR_RXF_OVERFLOW | AE_ISR_RXS_OVERFLOW | \ 72 AE_ISR_RXD_OVERFLOW | AE_ISR_RXD_UPDATED) 73 74/* Interrupt mask register. */ 75#define AE_IMR_REG 0x1604 76 77#define AE_IMR_DEFAULT (AE_ISR_DMAR_TIMEOUT | AE_ISR_DMAW_TIMEOUT | \ 78 AE_ISR_PHY_LINKDOWN | \ 79 AE_ISR_TXS_UPDATED | AE_ISR_RXD_UPDATED ) 80 81/* 82 * Ethernet address register. 83 */ 84#define AE_EADDR0_REG 0x1488 /* 5 - 2 bytes */ 85#define AE_EADDR1_REG 0x148c /* 1 - 0 bytes */ 86 87/* 88 * Desriptor rings registers. 89 * L2 supports 64-bit addressing but all rings base addresses 90 * should have the same high 32 bits of address. 91 */ 92#define AE_DESC_ADDR_HI_REG 0x1540 /* High 32 bits of ring base address. */ 93#define AE_RXD_ADDR_LO_REG 0x1554 /* Low 32 bits of RxD ring address. */ 94#define AE_TXD_ADDR_LO_REG 0x1544 /* Low 32 bits of TxD ring address. */ 95#define AE_TXS_ADDR_LO_REG 0x154c /* Low 32 bits of TxS ring address. */ 96#define AE_RXD_COUNT_REG 0x1558 /* Number of RxD descriptors in ring. 97 Should be 120-byte aligned (i.e. 98 the 'data' field of RxD should 99 have 128-byte alignment). */ 100#define AE_TXD_BUFSIZE_REG 0x1548 /* Size of TxD ring in 4-byte units. 101 Should be 4-byte aligned. */ 102#define AE_TXS_COUNT_REG 0x1550 /* Number of TxS descriptors in ring. 103 4 byte alignment. */ 104#define AE_RXD_COUNT_MIN 16 105#define AE_RXD_COUNT_MAX 512 106#define AE_RXD_COUNT_DEFAULT 64 107/* Padding to align frames on a 128-byte boundary. */ 108#define AE_RXD_PADDING 120 109 110#define AE_TXD_BUFSIZE_MIN 4096 111#define AE_TXD_BUFSIZE_MAX 65536 112#define AE_TXD_BUFSIZE_DEFAULT 8192 113 114#define AE_TXS_COUNT_MIN 8 /* Not sure. */ 115#define AE_TXS_COUNT_MAX 160 116#define AE_TXS_COUNT_DEFAULT 64 /* AE_TXD_BUFSIZE_DEFAULT / 128 */ 117 118/* 119 * Inter-frame gap configuration register. 120 */ 121#define AE_IFG_REG 0x1484 122 123#define AE_IFG_TXIPG_DEFAULT 0x60 /* 96-bit IFG time. */ 124#define AE_IFG_TXIPG_SHIFT 0 125#define AE_IFG_TXIPG_MASK 0x7f 126 127#define AE_IFG_RXIPG_DEFAULT 0x50 /* 80-bit IFG time. */ 128#define AE_IFG_RXIPG_SHIFT 8 129#define AE_IFG_RXIPG_MASK 0xff00 130 131#define AE_IFG_IPGR1_DEFAULT 0x40 /* Carrier-sense window. */ 132#define AE_IFG_IPGR1_SHIFT 16 133#define AE_IFG_IPGR1_MASK 0x7f0000 134 135#define AE_IFG_IPGR2_DEFAULT 0x60 /* IFG window. */ 136#define AE_IFG_IPGR2_SHIFT 24 137#define AE_IFG_IPGR2_MASK 0x7f000000 138 139/* 140 * Half-duplex mode configuration register. 141 */ 142#define AE_HDPX_REG 0x1498 143 144/* Collision window. */ 145#define AE_HDPX_LCOL_SHIFT 0 146#define AE_HDPX_LCOL_MASK 0x000003ff 147#define AE_HDPX_LCOL_DEFAULT 0x37 148 149/* Max retransmission time, after that the packet will be discarded. */ 150#define AE_HDPX_RETRY_SHIFT 12 151#define AE_HDPX_RETRY_MASK 0x0000f000 152#define AE_HDPX_RETRY_DEFAULT 0x0f 153 154/* Alternative binary exponential back-off time. */ 155#define AE_HDPX_ABEBT_SHIFT 20 156#define AE_HDPX_ABEBT_MASK 0x00f00000 157#define AE_HDPX_ABEBT_DEFAULT 0x0a 158 159/* IFG to start JAM for collision based flow control (8-bit time units).*/ 160#define AE_HDPX_JAMIPG_SHIFT 24 161#define AE_HDPX_JAMIPG_MASK 0x0f000000 162#define AE_HDPX_JAMIPG_DEFAULT 0x07 163 164/* Allow the transmission of a packet which has been excessively deferred. */ 165#define AE_HDPX_EXC_EN 0x00010000 166/* No back-off on collision, immediately start the retransmission. */ 167#define AE_HDPX_NO_BACK_C 0x00020000 168/* No back-off on backpressure, immediately start the transmission. */ 169#define AE_HDPX_NO_BACK_P 0x00040000 170/* Alternative binary exponential back-off enable. */ 171#define AE_HDPX_ABEBE 0x00080000 172 173/* 174 * Interrupt moderation timer configuration register. 175 */ 176#define AE_IMT_REG 0x1408 /* Timer value in 2 us units. */ 177#define AE_IMT_MAX 65000 178#define AE_IMT_MIN 50 179#define AE_IMT_DEFAULT 100 /* 200 microseconds. */ 180 181/* 182 * Interrupt clearing timer configuration register. 183 */ 184#define AE_ICT_REG 0x140e /* Maximum time allowed to clear 185 interrupt. In 2 us units. */ 186#define AE_ICT_DEFAULT 50000 /* 100ms */ 187 188/* 189 * MTU configuration register. 190 */ 191#define AE_MTU_REG 0x149c /* MTU size in bytes. */ 192 193/* 194 * Cut-through configuration register. 195 */ 196#define AE_CUT_THRESH_REG 0x1590 /* Cut-through threshold in unknown units. */ 197#define AE_CUT_THRESH_DEFAULT 0x177 198 199/* 200 * Flow-control configuration registers. 201 */ 202#define AE_FLOW_THRESH_HI_REG 0x15a8 /* High watermark of RxD 203 overflow threshold. */ 204#define AE_FLOW_THRESH_LO_REG 0x15aa /* Lower watermark of RxD 205 overflow threshold */ 206 207/* 208 * Mailbox configuration registers. 209*/ 210#define AE_MB_TXD_IDX_REG 0x15f0 /* TxD read index. */ 211#define AE_MB_RXD_IDX_REG 0x15f4 /* RxD write index. */ 212 213/* 214 * DMA configuration registers. 215 */ 216#define AE_DMAREAD_REG 0x1580 /* Read DMA configuration register. */ 217#define AE_DMAREAD_EN 1 218#define AE_DMAWRITE_REG 0x15a0 /* Write DMA configuration register. */ 219#define AE_DMAWRITE_EN 1 220 221/* 222 * MAC configuration register. 223 */ 224#define AE_MAC_REG 0x1480 225 226#define AE_MAC_TX_EN 0x00000001 /* Enable transmit. */ 227#define AE_MAC_RX_EN 0x00000002 /* Enable receive. */ 228#define AE_MAC_TX_FLOW_EN 0x00000004 /* Enable Tx flow control. */ 229#define AE_MAC_RX_FLOW_EN 0x00000008 /* Enable Rx flow control. */ 230#define AE_MAC_LOOPBACK 0x00000010 /* Loopback at MII. */ 231#define AE_MAC_FULL_DUPLEX 0x00000020 /* Enable full-duplex. */ 232#define AE_MAC_TX_CRC_EN 0x00000040 /* Enable CRC generation. */ 233#define AE_MAC_TX_AUTOPAD 0x00000080 /* Pad short frames. */ 234#define AE_MAC_PREAMBLE_MASK 0x00003c00 /* Preamble length. */ 235#define AE_MAC_PREAMBLE_SHIFT 10 236#define AE_MAC_PREAMBLE_DEFAULT 0x07 /* By standard. */ 237#define AE_MAC_RMVLAN_EN 0x00004000 /* Remove VLAN tags in 238 incoming packets. */ 239#define AE_MAC_PROMISC_EN 0x00008000 /* Enable promiscue mode. */ 240#define AE_MAC_TX_MAXBACKOFF 0x00100000 /* Unknown. */ 241#define AE_MAC_MCAST_EN 0x02000000 /* Pass all multicast frames. */ 242#define AE_MAC_BCAST_EN 0x04000000 /* Pass all broadcast frames. */ 243#define AE_MAC_CLK_PHY 0x08000000 /* If 1 uses loopback clock 244 PHY, if 0 - system clock. */ 245#define AE_HALFBUF_MASK 0xf0000000 /* Half-duplex retry buffer. */ 246#define AE_HALFBUF_SHIFT 28 247#define AE_HALFBUF_DEFAULT 2 /* XXX: From Linux. */ 248 249/* 250 * MDIO control register. 251 */ 252#define AE_MDIO_REG 0x1414 253#define AE_MDIO_DATA_MASK 0xffff 254#define AE_MDIO_DATA_SHIFT 0 255#define AE_MDIO_REGADDR_MASK 0x1f0000 256#define AE_MDIO_REGADDR_SHIFT 16 257#define AE_MDIO_READ 0x00200000 /* Read operation. */ 258#define AE_MDIO_SUP_PREAMBLE 0x00400000 /* Suppress preamble. */ 259#define AE_MDIO_START 0x00800000 /* Initiate MDIO transfer. */ 260#define AE_MDIO_CLK_SHIFT 24 /* Clock selection. */ 261#define AE_MDIO_CLK_MASK 0x07000000 /* Clock selection. */ 262#define AE_MDIO_CLK_25_4 0 /* Dividers? */ 263#define AE_MDIO_CLK_25_6 2 264#define AE_MDIO_CLK_25_8 3 265#define AE_MDIO_CLK_25_10 4 266#define AE_MDIO_CLK_25_14 5 267#define AE_MDIO_CLK_25_20 6 268#define AE_MDIO_CLK_25_28 7 269#define AE_MDIO_BUSY 0x08000000 /* MDIO is busy. */ 270 271/* 272 * Idle status register. 273 */ 274#define AE_IDLE_REG 0x1410 275 276/* 277 * Idle status bits. 278 * If bit is set then the corresponding module is in non-idle state. 279 */ 280#define AE_IDLE_RXMAC 1 281#define AE_IDLE_TXMAC 2 282#define AE_IDLE_DMAREAD 8 283#define AE_IDLE_DMAWRITE 4 284 285/* 286 * Multicast hash tables registers. 287 */ 288#define AE_REG_MHT0 0x1490 289#define AE_REG_MHT1 0x1494 290 291/* 292 * Wake on lan (WOL). 293 */ 294#define AE_WOL_REG 0x14a0 295#define AE_WOL_MAGIC 0x00000004 296#define AE_WOL_MAGIC_PME 0x00000008 297#define AE_WOL_LNKCHG 0x00000010 298#define AE_WOL_LNKCHG_PME 0x00000020 299 300/* 301 * PCIE configuration registers. Descriptions unknown. 302 */ 303#define AE_PCIE_LTSSM_TESTMODE_REG 0x12fc 304#define AE_PCIE_LTSSM_TESTMODE_DEFAULT 0x6500 305#define AE_PCIE_DLL_TX_CTRL_REG 0x1104 306#define AE_PCIE_DLL_TX_CTRL_SEL_NOR_CLK 0x0400 307#define AE_PCIE_DLL_TX_CTRL_DEFAULT 0x0568 308#define AE_PCIE_PHYMISC_REG 0x1000 309#define AE_PCIE_PHYMISC_FORCE_RCV_DET 0x4 310 311/* 312 * PHY enable register. 313 */ 314#define AE_PHY_ENABLE_REG 0x140c 315#define AE_PHY_ENABLE 1 316 317/* 318 * VPD registers. 319 */ 320#define AE_VPD_CAP_REG 0x6c /* Command register. */ 321#define AE_VPD_CAP_ID_MASK 0xff 322#define AE_VPD_CAP_ID_SHIFT 0 323#define AE_VPD_CAP_NEXT_MASK 0xff00 324#define AE_VPD_CAP_NEXT_SHIFT 8 325#define AE_VPD_CAP_ADDR_MASK 0x7fff0000 326#define AE_VPD_CAP_ADDR_SHIFT 16 327#define AE_VPD_CAP_DONE 0x80000000 328 329#define AE_VPD_DATA_REG 0x70 /* Data register. */ 330 331#define AE_VPD_NREGS 64 /* Maximum number of VPD regs. */ 332#define AE_VPD_SIG_MASK 0xff 333#define AE_VPD_SIG 0x5a /* VPD block signature. */ 334#define AE_VPD_REG_SHIFT 16 /* Register id offset. */ 335 336/* 337 * SPI registers. 338 */ 339#define AE_SPICTL_REG 0x200 340#define AE_SPICTL_VPD_EN 0x2000 /* Enable VPD. */ 341 342/* 343 * PHY-specific registers constants. 344 */ 345#define AE_PHY_DBG_ADDR 0x1d 346#define AE_PHY_DBG_DATA 0x1e 347#define AE_PHY_DBG_POWERSAVE 0x1000 348 349/* 350 * TxD flags. 351 */ 352#define AE_TXD_INSERT_VTAG 0x8000 /* Insert VLAN tag on transfer. */ 353 354/* 355 * TxS flags. 356 */ 357#define AE_TXS_SUCCESS 0x0001 /* Packed transmitted successfully. */ 358#define AE_TXS_BCAST 0x0002 /* Transmitted broadcast frame. */ 359#define AE_TXS_MCAST 0x0004 /* Transmitted multicast frame. */ 360#define AE_TXS_PAUSE 0x0008 /* Transmitted pause frame. */ 361#define AE_TXS_CTRL 0x0010 /* Transmitted control frame. */ 362#define AE_TXS_DEFER 0x0020 /* Frame transmitted with defer. */ 363#define AE_TXS_EXCDEFER 0x0040 /* Excessive collision. */ 364#define AE_TXS_SINGLECOL 0x0080 /* Single collision occuried. */ 365#define AE_TXS_MULTICOL 0x0100 /* Multiple collisions occuried. */ 366#define AE_TXS_LATECOL 0x0200 /* Late collision occuried. */ 367#define AE_TXS_ABORTCOL 0x0400 /* Frame abort due to collisions. */ 368#define AE_TXS_UNDERRUN 0x0800 /* Tx SRAM underrun occuried. */ 369#define AE_TXS_UPDATE 0x8000 370 371/* 372 * RxD flags. 373 */ 374#define AE_RXD_SUCCESS 0x0001 375#define AE_RXD_BCAST 0x0002 /* Broadcast frame received. */ 376#define AE_RXD_MCAST 0x0004 /* Multicast frame received. */ 377#define AE_RXD_PAUSE 0x0008 /* Pause frame received. */ 378#define AE_RXD_CTRL 0x0010 /* Control frame received. */ 379#define AE_RXD_CRCERR 0x0020 /* Invalid frame CRC. */ 380#define AE_RXD_CODEERR 0x0040 /* Invalid frame opcode. */ 381#define AE_RXD_RUNT 0x0080 /* Runt frame received. */ 382#define AE_RXD_FRAG 0x0100 /* Collision fragment received. */ 383#define AE_RXD_TRUNC 0x0200 /* The frame was truncated due 384 to Rx SRAM underrun. */ 385#define AE_RXD_ALIGN 0x0400 /* Frame alignment error. */ 386#define AE_RXD_HAS_VLAN 0x0800 /* VLAN tag present. */ 387#define AE_RXD_UPDATE 0x8000 388