The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the University nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: releng/10.2/lib/libc/net/sctp_send.3 251067 2013-05-28 20:37:48Z emaste $
.Dd December 15, 2006 .Dt SCTP_SEND 3 .Os .Sh NAME .Nm sctp_send , .Nm sctp_sendx .Nd send a message from an SCTP socket .Sh LIBRARY .Lb libc .Sh SYNOPSIS n sys/types.h n sys/socket.h n netinet/sctp.h .Ft ssize_t .Fo sctp_send .Fa "int sd" "const void *msg" "size_t len" .Fa "const struct sctp_sndrcvinfo *sinfo" "int flags" .Fc .Ft ssize_t .Fo sctp_sendx .Fa "int sd" "const void *msg" "size_t len" "struct sockaddr *addrs" .Fa "int addrcnt" "const struct sctp_sndrcvinfo *sinfo" "int flags" .Fc .Sh DESCRIPTION The .Fn sctp_send system call is used to transmit a message to another SCTP endpoint. .Fn sctp_send may be used to send data to an existing association for both one-to-many (SOCK_SEQPACKET) and one-to-one (SOCK_STREAM) socket types. The length of the message .Fa msg is given by .Fa len . If the message is too long to pass atomically through the underlying protocol, .Va errno is set to .Er EMSGSIZE , -1 is returned, and the message is not transmitted.
p No indication of failure to deliver is implicit in a .Fn sctp_send . Locally detected errors are indicated by a return value of -1.
p If no space is available at the socket to hold the message to be transmitted, then .Fn sctp_send normally blocks, unless the socket has been placed in non-blocking I/O mode. The .Xr select 2 system call may be used to determine when it is possible to send more data on one-to-one type (SOCK_STREAM) sockets.
p The .Fa sinfo structure is used to control various SCTP features and has the following format: d -literal struct sctp_sndrcvinfo { uint16_t sinfo_stream; /* Stream sending to */ uint16_t sinfo_ssn; /* valid for recv only */ uint16_t sinfo_flags; /* flags to control sending */ uint32_t sinfo_ppid; /* ppid field */ uint32_t sinfo_context; /* context field */ uint32_t sinfo_timetolive; /* timetolive for PR-SCTP */ uint32_t sinfo_tsn; /* valid for recv only */ uint32_t sinfo_cumtsn; /* valid for recv only */ sctp_assoc_t sinfo_assoc_id; /* The association id */ }; .Ed
p The .Fa sinfo->sinfo_ppid argument is an opaque 32 bit value that is passed transparently through the stack to the peer endpoint. It will be available on reception of a message (see .Xr sctp_recvmsg 3 ) . Note that the stack passes this value without regard to byte order.
p The .Fa sinfo->sinfo_flags argument may include one or more of the following: d -literal #define SCTP_EOF 0x0100 /* Start a shutdown procedures */ #define SCTP_ABORT 0x0200 /* Send an ABORT to peer */ #define SCTP_UNORDERED 0x0400 /* Message is un-ordered */ #define SCTP_ADDR_OVER 0x0800 /* Override the primary-address */ #define SCTP_SENDALL 0x1000 /* Send this on all associations */ /* for the endpoint */ /* The lower byte is an enumeration of PR-SCTP policies */ #define SCTP_PR_SCTP_TTL 0x0001 /* Time based PR-SCTP */ #define SCTP_PR_SCTP_BUF 0x0002 /* Buffer based PR-SCTP */ #define SCTP_PR_SCTP_RTX 0x0003 /* Number of retransmissions based PR-SCTP */ .Ed
p The flag .Dv SCTP_EOF is used to instruct the SCTP stack to queue this message and then start a graceful shutdown of the association. All remaining data in queue will be sent after which the association will be shut down.
p .Dv SCTP_ABORT is used to immediately terminate an association. An abort is sent to the peer and the local TCB is destroyed.
p .Dv SCTP_UNORDERED is used to specify that the message being sent has no specific order and should be delivered to the peer application as soon as possible. When this flag is absent messages are delivered in order within the stream they are sent, but without respect to order to peer streams.
p The flag .Dv SCTP_ADDR_OVER is used to specify that a specific address should be used. Normally SCTP will use only one of a multi-homed peers addresses as the primary address to send to. By default, no matter what the .Fa to argument is, this primary address is used to send data. By specifying this flag, the user is asking the stack to ignore the primary address and instead use the specified address not only as a lookup mechanism to find the association but also as the actual address to send to.
p For a one-to-many type (SOCK_SEQPACKET) socket the flag .Dv SCTP_SENDALL can be used as a convenient way to make one send call and have all associations that are under the socket get a copy of the message. Note that this mechanism is quite efficient and makes only one actual copy of the data which is shared by all the associations for sending.
p The remaining flags are used for the partial reliability extension (RFC3758) and will only be effective if the peer endpoint supports this extension. This option specifies what local policy the local endpoint should use in skipping data. If none of these options are set, then data is never skipped over.
p .Dv SCTP_PR_SCTP_TTL is used to indicate that a time based lifetime is being applied to the data. The .Fa sinfo->sinfo_timetolive argument is then a number of milliseconds for which the data is attempted to be transmitted. If that many milliseconds elapse and the peer has not acknowledged the data, the data will be skipped and no longer transmitted. Note that this policy does not even assure that the data will ever be sent. In times of a congestion with large amounts of data being queued, the .Fa sinfo->sinfo_timetolive may expire before the first transmission is ever made.
p The .Dv SCTP_PR_SCTP_BUF based policy transforms the .Fa sinfo->sinfo_timetolive field into a total number of bytes allowed on the outbound send queue. If that number or more bytes are in queue, then other buffer-based sends are looked to be removed and skipped. Note that this policy may also result in the data never being sent if no buffer based sends are in queue and the maximum specified by .Fa timetolive bytes is in queue.
p The .Dv SCTP_PR_SCTP_RTX policy transforms the .Fa sinfo->sinfo_timetolive into a number of retransmissions to allow. This policy always assures that at a minimum one send attempt is made of the data. After which no more than .Fa sinfo->sinfo_timetolive retransmissions will be made before the data is skipped.
p .Fa sinfo->sinfo_stream is the SCTP stream that you wish to send the message on. Streams in SCTP are reliable (or partially reliable) flows of ordered messages.
p The .Fa sinfo->sinfo_assoc_id field is used to select the association to send to on a one-to-many socket. For a one-to-one socket, this field is ignored.
p The .Fa sinfo->sinfo_context field is used only in the event the message cannot be sent. This is an opaque value that the stack retains and will give to the user when a failed send is given if that notification is enabled (see .Xr sctp 4 ) . Normally a user process can use this value to index some application specific data structure when a send cannot be fulfilled.
p The .Fa flags argument holds the same meaning and values as those found in .Xr sendmsg 2 but is generally ignored by SCTP.
p The fields .Fa sinfo->sinfo_ssn , .Fa sinfo->sinfo_tsn , and .Fa sinfo->sinfo_cumtsn are used only when receiving messages and are thus ignored by .Fn sctp_send . The function .Fn sctp_sendx has the same properties as .Fn sctp_send with the additional arguments of an array of sockaddr structures passed in. With the .Fa addrs argument being given as an array of addresses to be sent to and the .Fa addrcnt argument indicating how many socket addresses are in the passed in array. Note that all of the addresses will only be used when an implicit association is being set up. This allows the user the equivalent behavior as doing a .Fn sctp_connectx followed by a .Fn sctp_send to the association. Note that if the .Fa sinfo->sinfo_assoc_id field is 0, then the first address will be used to look up the association in place of the association id. If both an address and an association id are specified, the association id has priority. .Sh RETURN VALUES The call returns the number of characters sent, or -1 if an error occurred. .Sh ERRORS The .Fn sctp_send system call fails if: l -tag -width Er t Bq Er EBADF An invalid descriptor was specified. t Bq Er ENOTSOCK The argument .Fa s is not a socket. t Bq Er EFAULT An invalid user space address was specified for an argument. t Bq Er EMSGSIZE The socket requires that message be sent atomically, and the size of the message to be sent made this impossible. t Bq Er EAGAIN The socket is marked non-blocking and the requested operation would block. t Bq Er ENOBUFS The system was unable to allocate an internal buffer. The operation may succeed when buffers become available. t Bq Er ENOBUFS The output queue for a network interface was full. This generally indicates that the interface has stopped sending, but may be caused by transient congestion. t Bq Er EHOSTUNREACH The remote host was unreachable. t Bq Er ENOTCONN On a one-to-one style socket no association exists. t Bq Er ECONNRESET An abort was received by the stack while the user was attempting to send data to the peer. t Bq Er ENOENT On a one-to-many style socket no address is specified so that the association cannot be located or the SCTP_ABORT flag was specified on a non-existing association. t Bq Er EPIPE The socket is unable to send anymore data .Dv ( SBS_CANTSENDMORE has been set on the socket). This typically means that the socket is not connected and is a one-to-one style socket. .El .Sh SEE ALSO .Xr getsockopt 2 , .Xr recv 2 , .Xr select 2 , .Xr sendmsg 2 , .Xr socket 2 , .Xr write 2 .Xr sctp_connectx 3 , .Xr sctp_recvmsg 3 , .Xr sctp_sendmsg 3 , .Xr sctp 4 .Sh BUGS Because .Fn sctp_send may have multiple associations under one endpoint, a select on write will only work for a one-to-one style socket.