1/*-
2 * Copyright (c) KATO Takenori, 1996.  All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 *    notice, this list of conditions and the following disclaimer as
9 *    the first lines of this file unmodified.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 * 3. The name of the author may not be used to endorse or promote products
14 *    derived from this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 *
27 * $FreeBSD$
28 */
29
30/*
31 * PC-9801 specific definitions for DP8390/SMC8216 NICs.
32 */
33
34/*
35 * Vendor types
36 */
37#define	ED_VENDOR_MISC		0xf0		/* others */
38
39/*
40 * Card types.
41 *
42 * Type  Card
43 * 0x00  Allied Telesis CenterCom LA-98-T / SMC EtherEZ98.
44 * 0x10  ** RESERVED **
45 * 0x20  PLANET SMART COM 98 EN-2298 / ELECOM LANEED LD-BDN[123]A.
46 * 0x30  MELCO EGY-98 / Contec C-NET(98)E-A/L-A.
47 * 0x40  MELCO LGY-98, IND-SP, IND-SS / MACNICA NE2098(XXX).
48 * 0x50  ICM DT-ET-25, DT-ET-T5, IF-2766ET, IF-2771ET /
49 *       D-Link DE-298P{T,CAT}, DE-298{T,TP,CAT}.
50 * 0x60  Allied Telesis SIC-98.
51 * 0x70  ** RESERVED **
52 * 0x80  NEC PC-9801-108.
53 * 0x90  IO-DATA LA-98 / NEC PC-9801-77.
54 * 0xa0  Contec C-NET(98).
55 * 0xb0  Contec C-NET(98)E/L.
56 * 0xc0  ** RESERVED **
57 * 0xd0  Networld EC/EP-98X.
58 * 0xe0  Soliton SB-9801 / Fujikura FN-9801 / Networld EC/EP-98S.
59 * 0xf0  NextCom NC5098.
60 */
61#define	ED_TYPE98_BASE		0x80
62
63#define	ED_TYPE98_GENERIC	0x80
64#define	ED_TYPE98_BDN		0x82
65#define	ED_TYPE98_EGY		0x83
66#define	ED_TYPE98_LGY		0x84
67#define	ED_TYPE98_ICM		0x85
68#define	ED_TYPE98_SIC		0x86
69#define	ED_TYPE98_108		0x88
70#define	ED_TYPE98_LA98		0x89
71#define	ED_TYPE98_CNET98	0x8a
72#define	ED_TYPE98_CNET98EL	0x8b
73#define	ED_TYPE98_NW98X		0x8d
74#define	ED_TYPE98_SB98		0x8e
75#define	ED_TYPE98_NC5098	0x8f
76
77#define	ED_TYPE98(x)	(((x & 0xffff0000) >> 20) | ED_TYPE98_BASE)
78#define	ED_TYPE98SUB(x)	((x & 0xf0000) >> 16)
79
80/*
81 * 		Definitions for C-NET(98) serise
82 */
83/*
84 * Initial Register(on board JP1)
85 */
86#define	ED_CNET98_INIT		0xaaed		/* default */
87#define	ED_CNET98_INIT2		0x55ed		/* another setting */
88
89#define	ED_CNET98EL_PAGE_OFFSET	0x0000	/* Page offset for NIC access to mem */
90
91/*
92 *		Definitions for Soliton SB-9801
93 */
94/*
95 * I/O port select register
96 */
97#define	ED_SB98_IO_INHIBIT	0x0040	/* XXX - shares printer port! */
98
99/*
100 *		Definitions for SMC EtherEZ98(SMC8498BTA)
101 */
102#define	ED_EZ98_NIC_OFFSET	0x100		/* I/O base offset to NIC */
103#define	ED_EZ98_ASIC_OFFSET	0		/* I/O base offset to ASIC */
104/*
105 * XXX - The I/O address range is fragmented in the EtherEZ98;
106 *      it occupies 16*2 I/O addresses, by the way.
107 */
108#define	ED_EZ98_IO_PORTS	16		/* # of i/o addresses used */
109