1/* $NetBSD: obio.c,v 1.11 2003/07/15 00:25:05 lukem Exp $ */ 2 3/*- 4 * Copyright (c) 2001, 2002, 2003 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Jason R. Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38/* 39 * On-board device autoconfiguration support for Intel IQ80321 40 * evaluation boards. 41 */ 42 43#include <sys/cdefs.h> 44__FBSDID("$FreeBSD$"); 45 46#include <sys/param.h> 47#include <sys/systm.h> 48#include <sys/bus.h> 49#include <sys/kernel.h> 50#include <sys/module.h> 51#include <sys/rman.h> 52#include <sys/malloc.h> 53 54#include <machine/bus.h> 55 56#include <mips/malta/maltareg.h> 57#include <mips/malta/obiovar.h> 58 59int obio_probe(device_t); 60int obio_attach(device_t); 61 62/* 63 * A bit tricky and hackish. Since we need OBIO to rely 64 * on PCI we make it pseudo-pci device. But there should 65 * be only one such device, so we use this static flag 66 * to prevent false positives on every real PCI device probe. 67 */ 68static int have_one = 0; 69 70int 71obio_probe(device_t dev) 72{ 73 if (!have_one) { 74 have_one = 1; 75 return 0; 76 } 77 return (ENXIO); 78} 79 80int 81obio_attach(device_t dev) 82{ 83 struct obio_softc *sc = device_get_softc(dev); 84 85 sc->oba_st = mips_bus_space_generic; 86 sc->oba_addr = MIPS_PHYS_TO_KSEG1(MALTA_UART0ADR); 87 sc->oba_size = MALTA_PCIMEM3_SIZE; 88 sc->oba_rman.rm_type = RMAN_ARRAY; 89 sc->oba_rman.rm_descr = "OBIO I/O"; 90 if (rman_init(&sc->oba_rman) != 0 || 91 rman_manage_region(&sc->oba_rman, 92 sc->oba_addr, sc->oba_addr + sc->oba_size) != 0) 93 panic("obio_attach: failed to set up I/O rman"); 94 sc->oba_irq_rman.rm_type = RMAN_ARRAY; 95 sc->oba_irq_rman.rm_descr = "OBIO IRQ"; 96 97 /* 98 * This module is intended for UART purposes only and 99 * it's IRQ is 4 100 */ 101 if (rman_init(&sc->oba_irq_rman) != 0 || 102 rman_manage_region(&sc->oba_irq_rman, 4, 4) != 0) 103 panic("obio_attach: failed to set up IRQ rman"); 104 105 device_add_child(dev, "uart", 0); 106 bus_generic_probe(dev); 107 bus_generic_attach(dev); 108 109 return (0); 110} 111 112static struct resource * 113obio_alloc_resource(device_t bus, device_t child, int type, int *rid, 114 u_long start, u_long end, u_long count, u_int flags) 115{ 116 struct resource *rv; 117 struct rman *rm; 118 bus_space_tag_t bt = 0; 119 bus_space_handle_t bh = 0; 120 struct obio_softc *sc = device_get_softc(bus); 121 122 switch (type) { 123 case SYS_RES_IRQ: 124 rm = &sc->oba_irq_rman; 125 break; 126 case SYS_RES_MEMORY: 127 return (NULL); 128 case SYS_RES_IOPORT: 129 rm = &sc->oba_rman; 130 bt = sc->oba_st; 131 bh = sc->oba_addr; 132 start = bh; 133 break; 134 default: 135 return (NULL); 136 } 137 138 139 rv = rman_reserve_resource(rm, start, end, count, flags, child); 140 if (rv == NULL) 141 return (NULL); 142 if (type == SYS_RES_IRQ) 143 return (rv); 144 rman_set_rid(rv, *rid); 145 rman_set_bustag(rv, bt); 146 rman_set_bushandle(rv, bh); 147 148 if (0) { 149 if (bus_activate_resource(child, type, *rid, rv)) { 150 rman_release_resource(rv); 151 return (NULL); 152 } 153 } 154 return (rv); 155 156} 157 158static int 159obio_activate_resource(device_t bus, device_t child, int type, int rid, 160 struct resource *r) 161{ 162 return (0); 163} 164static device_method_t obio_methods[] = { 165 DEVMETHOD(device_probe, obio_probe), 166 DEVMETHOD(device_attach, obio_attach), 167 168 DEVMETHOD(bus_alloc_resource, obio_alloc_resource), 169 DEVMETHOD(bus_activate_resource, obio_activate_resource), 170 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 171 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 172 173 {0, 0}, 174}; 175 176static driver_t obio_driver = { 177 "obio", 178 obio_methods, 179 sizeof(struct obio_softc), 180}; 181static devclass_t obio_devclass; 182 183DRIVER_MODULE(obio, pci, obio_driver, obio_devclass, 0, 0); 184