1/*-
2 * Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@gmail.com>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 */
26
27/*
28 * Allwinner A10 attachment driver for the USB Enhanced Host Controller.
29 */
30
31#include <sys/cdefs.h>
32__FBSDID("$FreeBSD$");
33
34#include "opt_bus.h"
35
36#include <sys/param.h>
37#include <sys/systm.h>
38#include <sys/bus.h>
39#include <sys/rman.h>
40#include <sys/condvar.h>
41#include <sys/kernel.h>
42#include <sys/module.h>
43#include <sys/gpio.h>
44
45#include <machine/bus.h>
46#include <dev/ofw/ofw_bus.h>
47#include <dev/ofw/ofw_bus_subr.h>
48
49#include <dev/usb/usb.h>
50#include <dev/usb/usbdi.h>
51
52#include <dev/usb/usb_core.h>
53#include <dev/usb/usb_busdma.h>
54#include <dev/usb/usb_process.h>
55#include <dev/usb/usb_util.h>
56
57#include <dev/usb/usb_controller.h>
58#include <dev/usb/usb_bus.h>
59#include <dev/usb/controller/ehci.h>
60#include <dev/usb/controller/ehcireg.h>
61
62#include "gpio_if.h"
63
64#include "a10_clk.h"
65
66#define EHCI_HC_DEVSTR			"Allwinner Integrated USB 2.0 controller"
67
68#define SW_USB_PMU_IRQ_ENABLE		0x800
69
70#define SW_SDRAM_REG_HPCR_USB1		(0x250 + ((1 << 2) * 4))
71#define SW_SDRAM_REG_HPCR_USB2		(0x250 + ((1 << 2) * 5))
72#define SW_SDRAM_BP_HPCR_ACCESS		(1 << 0)
73
74#define SW_ULPI_BYPASS			(1 << 0)
75#define SW_AHB_INCRX_ALIGN		(1 << 8)
76#define SW_AHB_INCR4			(1 << 9)
77#define SW_AHB_INCR8			(1 << 10)
78#define GPIO_USB1_PWR			230
79#define GPIO_USB2_PWR			227
80
81#define A10_READ_4(sc, reg)		\
82	bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, reg)
83
84#define A10_WRITE_4(sc, reg, data)	\
85	bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, data)
86
87static device_attach_t a10_ehci_attach;
88static device_detach_t a10_ehci_detach;
89
90bs_r_1_proto(reversed);
91bs_w_1_proto(reversed);
92
93static int
94a10_ehci_probe(device_t self)
95{
96	if (!ofw_bus_is_compatible(self, "allwinner,usb-ehci"))
97		return (ENXIO);
98
99	device_set_desc(self, EHCI_HC_DEVSTR);
100
101	return (BUS_PROBE_DEFAULT);
102}
103
104static int
105a10_ehci_attach(device_t self)
106{
107	ehci_softc_t *sc = device_get_softc(self);
108	bus_space_handle_t bsh;
109	device_t sc_gpio_dev;
110	int err;
111	int rid;
112	uint32_t reg_value = 0;
113
114	/* initialise some bus fields */
115	sc->sc_bus.parent = self;
116	sc->sc_bus.devices = sc->sc_devices;
117	sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
118
119	/* get all DMA memory */
120	if (usb_bus_mem_alloc_all(&sc->sc_bus,
121	    USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
122		return (ENOMEM);
123	}
124
125	sc->sc_bus.usbrev = USB_REV_2_0;
126
127	rid = 0;
128	sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE);
129	if (!sc->sc_io_res) {
130		device_printf(self, "Could not map memory\n");
131		goto error;
132	}
133
134	sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
135	sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
136	bsh = rman_get_bushandle(sc->sc_io_res);
137
138	sc->sc_io_size = rman_get_size(sc->sc_io_res);
139
140	if (bus_space_subregion(sc->sc_io_tag, bsh, 0x00,
141	    sc->sc_io_size, &sc->sc_io_hdl) != 0)
142		panic("%s: unable to subregion USB host registers",
143		    device_get_name(self));
144
145	rid = 0;
146	sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
147	    RF_SHAREABLE | RF_ACTIVE);
148	if (sc->sc_irq_res == NULL) {
149		device_printf(self, "Could not allocate irq\n");
150		goto error;
151	}
152	sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
153	if (!sc->sc_bus.bdev) {
154		device_printf(self, "Could not add USB device\n");
155		goto error;
156	}
157	device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
158	device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR);
159
160	sprintf(sc->sc_vendor, "Allwinner");
161
162        /* Get the GPIO device, we need this to give power to USB */
163	sc_gpio_dev = devclass_get_device(devclass_find("gpio"), 0);
164	if (sc_gpio_dev == NULL) {
165		device_printf(self, "Error: failed to get the GPIO device\n");
166		goto error;
167	}
168
169	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
170	    NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
171	if (err) {
172		device_printf(self, "Could not setup irq, %d\n", err);
173		sc->sc_intr_hdl = NULL;
174		goto error;
175	}
176
177	sc->sc_flags |= EHCI_SCFLG_DONTRESET;
178
179	/* Enable clock for USB */
180	a10_clk_usb_activate();
181
182	/* Give power to USB */
183	GPIO_PIN_SETFLAGS(sc_gpio_dev, GPIO_USB2_PWR, GPIO_PIN_OUTPUT);
184	GPIO_PIN_SET(sc_gpio_dev, GPIO_USB2_PWR, GPIO_PIN_HIGH);
185
186	/* Give power to USB */
187	GPIO_PIN_SETFLAGS(sc_gpio_dev, GPIO_USB1_PWR, GPIO_PIN_OUTPUT);
188	GPIO_PIN_SET(sc_gpio_dev, GPIO_USB1_PWR, GPIO_PIN_HIGH);
189
190	/* Enable passby */
191	reg_value = A10_READ_4(sc, SW_USB_PMU_IRQ_ENABLE);
192	reg_value |= SW_AHB_INCR8; /* AHB INCR8 enable */
193	reg_value |= SW_AHB_INCR4; /* AHB burst type INCR4 enable */
194	reg_value |= SW_AHB_INCRX_ALIGN; /* AHB INCRX align enable */
195	reg_value |= SW_ULPI_BYPASS; /* ULPI bypass enable */
196	A10_WRITE_4(sc, SW_USB_PMU_IRQ_ENABLE, reg_value);
197
198	/* Configure port */
199	reg_value = A10_READ_4(sc, SW_SDRAM_REG_HPCR_USB2);
200	reg_value |= SW_SDRAM_BP_HPCR_ACCESS;
201	A10_WRITE_4(sc, SW_SDRAM_REG_HPCR_USB2, reg_value);
202
203	err = ehci_init(sc);
204	if (!err) {
205		err = device_probe_and_attach(sc->sc_bus.bdev);
206	}
207	if (err) {
208		device_printf(self, "USB init failed err=%d\n", err);
209		goto error;
210	}
211	return (0);
212
213error:
214	a10_ehci_detach(self);
215	return (ENXIO);
216}
217
218static int
219a10_ehci_detach(device_t self)
220{
221	ehci_softc_t *sc = device_get_softc(self);
222	device_t bdev;
223	int err;
224	uint32_t reg_value = 0;
225
226	if (sc->sc_bus.bdev) {
227		bdev = sc->sc_bus.bdev;
228		device_detach(bdev);
229		device_delete_child(self, bdev);
230	}
231	/* during module unload there are lots of children leftover */
232	device_delete_children(self);
233
234	if (sc->sc_irq_res && sc->sc_intr_hdl) {
235		/*
236		 * only call ehci_detach() after ehci_init()
237		 */
238		ehci_detach(sc);
239
240		err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
241
242		if (err)
243			/* XXX or should we panic? */
244			device_printf(self, "Could not tear down irq, %d\n",
245			    err);
246		sc->sc_intr_hdl = NULL;
247	}
248
249	if (sc->sc_irq_res) {
250		bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
251		sc->sc_irq_res = NULL;
252	}
253	if (sc->sc_io_res) {
254		bus_release_resource(self, SYS_RES_MEMORY, 0,
255		    sc->sc_io_res);
256		sc->sc_io_res = NULL;
257	}
258	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
259
260	/* Disable configure port */
261	reg_value = A10_READ_4(sc, SW_SDRAM_REG_HPCR_USB2);
262	reg_value &= ~SW_SDRAM_BP_HPCR_ACCESS;
263	A10_WRITE_4(sc, SW_SDRAM_REG_HPCR_USB2, reg_value);
264
265	/* Disable passby */
266	reg_value = A10_READ_4(sc, SW_USB_PMU_IRQ_ENABLE);
267	reg_value &= ~SW_AHB_INCR8; /* AHB INCR8 disable */
268	reg_value &= ~SW_AHB_INCR4; /* AHB burst type INCR4 disable */
269	reg_value &= ~SW_AHB_INCRX_ALIGN; /* AHB INCRX align disable */
270	reg_value &= ~SW_ULPI_BYPASS; /* ULPI bypass disable */
271	A10_WRITE_4(sc, SW_USB_PMU_IRQ_ENABLE, reg_value);
272
273	/* Disable clock for USB */
274	a10_clk_usb_deactivate();
275
276	return (0);
277}
278
279static device_method_t ehci_methods[] = {
280	/* Device interface */
281	DEVMETHOD(device_probe, a10_ehci_probe),
282	DEVMETHOD(device_attach, a10_ehci_attach),
283	DEVMETHOD(device_detach, a10_ehci_detach),
284	DEVMETHOD(device_suspend, bus_generic_suspend),
285	DEVMETHOD(device_resume, bus_generic_resume),
286	DEVMETHOD(device_shutdown, bus_generic_shutdown),
287
288	DEVMETHOD_END
289};
290
291static driver_t ehci_driver = {
292	.name = "ehci",
293	.methods = ehci_methods,
294	.size = sizeof(ehci_softc_t),
295};
296
297static devclass_t ehci_devclass;
298
299DRIVER_MODULE(ehci, simplebus, ehci_driver, ehci_devclass, 0, 0);
300MODULE_DEPEND(ehci, usb, 1, 1, 1);
301