1# 2# Specific board setup for the Buffalo Airstation WZR-300HP 3# 4# The WZR-300HP has the following hardware: 5# 6# + AR7242 CPU SoC 7# + AR9280 5GHz 11n 8# + AR8136 Gigabit switch 9# + 2 m25ll128 based 16MB flash 10# + 64MB RAM 11# + uboot environment 12 13# $FreeBSD$ 14 15include "AR724X_BASE" 16ident "WZR-300HP" 17hints "WZR-300HP.hints" 18 19options AR71XX_REALMEM=64*1024*1024 20 21options AR71XX_ENV_UBOOT 22 23options BOOTVERBOSE 24# Don't include the SCSI/CAM strings in the default build 25options SCSI_NO_SENSE_STRINGS 26options SCSI_NO_OP_STRINGS 27 28# .. And no sysctl strings 29options NO_SYSCTL_DESCR 30 31# GEOM modules 32device geom_map # to get access to the SPI flash partitions 33device geom_uncompress # compressed in-memory filesystem hackery! 34 35options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\" 36 37# options MD_ROOT 38# options MD_ROOT_SIZE="6144" 39 40options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash 41options ATH_EEPROM_FIRMWARE # Use EEPROM from flash 42device firmware # Used by the above 43 44# Options required for miiproxy and mdiobus 45options ARGE_MDIO # Export an MDIO bus separate from arge 46device miiproxy # MDIO bus <-> MII PHY rendezvous 47 48device etherswitch 49device arswitch 50 51# Enable GPIO 52device gpio 53device gpioled 54 55# hwpmc 56device hwpmc_mips24k 57device hwpmc 58