1# $FreeBSD$ 2 3# arge0 MDIO bus 4hint.argemdio.0.at="nexus0" 5hint.argemdio.0.maddr=0x19000000 6hint.argemdio.0.msize=0x1000 7hint.argemdio.0.order=0 8 9# arge1 MDIO bus doesn't exist on the AR7240 10 11# arge0: MII; dedicated PHY 4 on switch, connected via internal switch 12# MDIO bus. 13 14# hint.arge.0.eeprommac=0x83fe9ff0 15hint.arge.0.phymask=0x10 # PHY 4 16# hint.arge.0.miimode=2 # MII 17hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus 18 19# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII. 20hint.arge.1.phymask=0x0 21# hint.arge.1.miimode=1 # GMII 22hint.arge.1.media=1000 # Force to 1000BaseTX/full 23hint.arge.1.fduplex=1 24 25# 26# AR7240 switch config 27# 28hint.arswitch.0.at="mdio0" 29hint.arswitch.0.is_7240=1 # We need to be explicitly told this 30hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3) 31hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY 32hint.arswitch.0.is_rgmii=0 # No, not RGMII 33hint.arswitch.0.is_gmii=0 # No, not GMII 34 35# ath0 hint - pcie slot 0 36hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000 37hint.pcib.0.bus.0.0.0.ath_fixup_size=4096 38 39# ath0 - eeprom comes from here 40hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware" 41 42# Signal leds 43hint.gpioled.0.at="gpiobus0" 44hint.gpioled.0.name="sig1" 45hint.gpioled.0.pins=0x0001 # pin 0 46hint.gpioled.1.at="gpiobus0" 47hint.gpioled.1.name="sig2" 48hint.gpioled.1.pins=0x0002 # pin 1 49hint.gpioled.2.at="gpiobus0" 50hint.gpioled.2.name="sig3" 51hint.gpioled.2.pins=0x0800 # pin 11 52hint.gpioled.3.at="gpiobus0" 53hint.gpioled.3.name="sig4" 54hint.gpioled.3.pins=0x0080 # pin 7 55 56# nvram mapping - XXX ? 57hint.nvram.0.base=0x1f030000 58hint.nvram.0.maxsize=0x2000 59hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic 60hint.nvram.1.base=0x1f032000 61hint.nvram.1.maxsize=0x4000 62hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic 63 64# GEOM_MAP 65# 66# From my AP93 environment: 67# 68# 256k - uboot 69# 256k - uboot-env 70# 3072k - spare-rootfs 71# 1024k - spare-uImage 72# 3072k - rootfs 73# 1024k - uImage 74# 64k - mib0 75# 64k - mib1 76# 4096k - ct 77# 3392k - var 78# 64k - ART 79 80# To make it useful for FreeBSD for now, treat spare rootfs, spare 81# uimage and rootfs as 'rootfs'. 82 83hint.map.0.at="flash/spi0" 84hint.map.0.start=0x00000000 85hint.map.0.end=0x00040000 86hint.map.0.name="uboot" 87hint.map.0.readonly=1 88 89hint.map.1.at="flash/spi0" 90hint.map.1.start=0x00040000 91hint.map.1.end=0x00080000 92hint.map.1.name="uboot-env" 93hint.map.1.readonly=1 94 95hint.map.2.at="flash/spi0" 96hint.map.2.start=0x00080000 97# hint.map.2.end=0x00380000 98hint.map.2.end=0x00780000 99# hint.map.2.name="spare-rootfs" 100hint.map.2.name="rootfs" 101hint.map.2.readonly=1 102 103#hint.map.3.at="flash/spi0" 104#hint.map.3.start=0x00380000 105#hint.map.3.end=0x00480000 106#hint.map.3.name="spare-uImage" 107#hint.map.3.readonly=1 108 109#hint.map.4.at="flash/spi0" 110#hint.map.4.start=0x00480000 111#hint.map.4.end=0x00780000 112#hint.map.4.name="rootfs" 113#hint.map.4.readonly=1 114 115hint.map.3.at="flash/spi0" 116hint.map.3.start=0x00780000 117hint.map.3.end=0x00880000 118hint.map.3.name="uImage" 119hint.map.3.readonly=1 120 121hint.map.4.at="flash/spi0" 122hint.map.4.start=0x00880000 123hint.map.4.end=0x00890000 124hint.map.4.name="mib0" 125hint.map.4.readonly=1 126 127hint.map.5.at="flash/spi0" 128hint.map.5.start=0x00890000 129hint.map.5.end=0x008a0000 130hint.map.5.name="mib1" 131hint.map.5.readonly=1 132 133hint.map.6.at="flash/spi0" 134hint.map.6.start=0x008a0000 135hint.map.6.end=0x00ca0000 136hint.map.6.name="ct" 137hint.map.6.readonly=1 138 139hint.map.7.at="flash/spi0" 140hint.map.7.start=0x00ca0000 141hint.map.7.end=0x00ff0000 142hint.map.7.name="var" 143hint.map.7.readonly=1 144 145hint.map.8.at="flash/spi0" 146hint.map.8.start=0x00ff0000 147hint.map.8.end=0x01000000 # 64k ART 148hint.map.8.name="ART" 149hint.map.8.readonly=1 150 151