1/*-
2 * Copyright (c) 1990 The Regents of the University of California.
3 * All rights reserved.
4 *
5 * This code is derived from software contributed to Berkeley by
6 * William Jolitz.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 *    notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 *    notice, this list of conditions and the following disclaimer in the
15 *    documentation and/or other materials provided with the distribution.
16 * 4. Neither the name of the University nor the names of its contributors
17 *    may be used to endorse or promote products derived from this software
18 *    without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 *
32 * $FreeBSD: stable/10/sys/i386/i386/swtch.s 335455 2018-06-20 18:51:38Z kib $
33 */
34
35#include "opt_npx.h"
36#include "opt_sched.h"
37
38#include <machine/asmacros.h>
39
40#include "assym.s"
41
42#if defined(SMP) && defined(SCHED_ULE)
43#define	SETOP		xchgl
44#define	BLOCK_SPIN(reg)							\
45		movl		$blocked_lock,%eax ;			\
46	100: ;								\
47		lock ;							\
48		cmpxchgl	%eax,TD_LOCK(reg) ;			\
49		jne		101f ;					\
50		pause ;							\
51		jmp		100b ;					\
52	101:
53#else
54#define	SETOP		movl
55#define	BLOCK_SPIN(reg)
56#endif
57
58/*****************************************************************************/
59/* Scheduling                                                                */
60/*****************************************************************************/
61
62	.text
63
64/*
65 * cpu_throw()
66 *
67 * This is the second half of cpu_switch(). It is used when the current
68 * thread is either a dummy or slated to die, and we no longer care
69 * about its state.  This is only a slight optimization and is probably
70 * not worth it anymore.  Note that we need to clear the pm_active bits so
71 * we do need the old proc if it still exists.
72 * 0(%esp) = ret
73 * 4(%esp) = oldtd
74 * 8(%esp) = newtd
75 */
76ENTRY(cpu_throw)
77	movl	PCPU(CPUID), %esi
78	movl	4(%esp),%ecx			/* Old thread */
79	testl	%ecx,%ecx			/* no thread? */
80	jz	1f
81	/* release bit from old pm_active */
82	movl	PCPU(CURPMAP), %ebx
83#ifdef SMP
84	lock
85#endif
86	btrl	%esi, PM_ACTIVE(%ebx)		/* clear old */
871:
88	movl	8(%esp),%ecx			/* New thread */
89	movl	TD_PCB(%ecx),%edx
90	movl	PCB_CR3(%edx),%eax
91	LOAD_CR3(%eax)
92	/* set bit in new pm_active */
93	movl	TD_PROC(%ecx),%eax
94	movl	P_VMSPACE(%eax), %ebx
95	addl	$VM_PMAP, %ebx
96	movl	%ebx, PCPU(CURPMAP)
97#ifdef SMP
98	lock
99#endif
100	btsl	%esi, PM_ACTIVE(%ebx)		/* set new */
101	jmp	sw1
102END(cpu_throw)
103
104/*
105 * cpu_switch(old, new)
106 *
107 * Save the current thread state, then select the next thread to run
108 * and load its state.
109 * 0(%esp) = ret
110 * 4(%esp) = oldtd
111 * 8(%esp) = newtd
112 * 12(%esp) = newlock
113 */
114ENTRY(cpu_switch)
115
116	/* Switch to new thread.  First, save context. */
117	movl	4(%esp),%ecx
118
119#ifdef INVARIANTS
120	testl	%ecx,%ecx			/* no thread? */
121	jz	badsw2				/* no, panic */
122#endif
123
124	movl	TD_PCB(%ecx),%edx
125
126	movl	(%esp),%eax			/* Hardware registers */
127	movl	%eax,PCB_EIP(%edx)
128	movl	%ebx,PCB_EBX(%edx)
129	movl	%esp,PCB_ESP(%edx)
130	movl	%ebp,PCB_EBP(%edx)
131	movl	%esi,PCB_ESI(%edx)
132	movl	%edi,PCB_EDI(%edx)
133	mov	%gs,PCB_GS(%edx)
134	pushfl					/* PSL */
135	popl	PCB_PSL(%edx)
136	/* Test if debug registers should be saved. */
137	testl	$PCB_DBREGS,PCB_FLAGS(%edx)
138	jz      1f                              /* no, skip over */
139	movl    %dr7,%eax                       /* yes, do the save */
140	movl    %eax,PCB_DR7(%edx)
141	andl    $0x0000fc00, %eax               /* disable all watchpoints */
142	movl    %eax,%dr7
143	movl    %dr6,%eax
144	movl    %eax,PCB_DR6(%edx)
145	movl    %dr3,%eax
146	movl    %eax,PCB_DR3(%edx)
147	movl    %dr2,%eax
148	movl    %eax,PCB_DR2(%edx)
149	movl    %dr1,%eax
150	movl    %eax,PCB_DR1(%edx)
151	movl    %dr0,%eax
152	movl    %eax,PCB_DR0(%edx)
1531:
154
155#ifdef DEV_NPX
156	/* have we used fp, and need a save? */
157	cmpl	%ecx,PCPU(FPCURTHREAD)
158	jne	1f
159	pushl	PCB_SAVEFPU(%edx)		/* h/w bugs make saving complicated */
160	call	npxsave				/* do it in a big C function */
161	popl	%eax
1621:
163#endif
164
165	/* Save is done.  Now fire up new thread. Leave old vmspace. */
166	movl	4(%esp),%edi
167	movl	8(%esp),%ecx			/* New thread */
168	movl	12(%esp),%esi			/* New lock */
169#ifdef INVARIANTS
170	testl	%ecx,%ecx			/* no thread? */
171	jz	badsw3				/* no, panic */
172#endif
173	movl	TD_PCB(%ecx),%edx
174
175	/* switch address space */
176	movl	PCB_CR3(%edx),%eax
177#if defined(PAE) || defined(PAE_TABLES)
178	cmpl	%eax,IdlePDPT			/* Kernel address space? */
179#else
180	cmpl	%eax,IdlePTD			/* Kernel address space? */
181#endif
182	je	sw0
183	READ_CR3(%ebx)				/* The same address space? */
184	cmpl	%ebx,%eax
185	je	sw0
186	LOAD_CR3(%eax)				/* new address space */
187	movl	%esi,%eax
188	movl	PCPU(CPUID),%esi
189	SETOP	%eax,TD_LOCK(%edi)		/* Switchout td_lock */
190
191	/* Release bit from old pmap->pm_active */
192	movl	PCPU(CURPMAP), %ebx
193#ifdef SMP
194	lock
195#endif
196	btrl	%esi, PM_ACTIVE(%ebx)		/* clear old */
197
198	/* Set bit in new pmap->pm_active */
199	movl	TD_PROC(%ecx),%eax		/* newproc */
200	movl	P_VMSPACE(%eax), %ebx
201	addl	$VM_PMAP, %ebx
202	movl	%ebx, PCPU(CURPMAP)
203#ifdef SMP
204	lock
205#endif
206	btsl	%esi, PM_ACTIVE(%ebx)		/* set new */
207	jmp	sw1
208
209sw0:
210	SETOP	%esi,TD_LOCK(%edi)		/* Switchout td_lock */
211sw1:
212	BLOCK_SPIN(%ecx)
213#ifdef XEN
214	pushl	%eax
215	pushl	%ecx
216	pushl	%edx
217	call	xen_handle_thread_switch
218	popl	%edx
219	popl	%ecx
220	popl	%eax
221	/*
222	 * XXX set IOPL
223	 */
224#else
225	/*
226	 * At this point, we've switched address spaces and are ready
227	 * to load up the rest of the next context.
228	 */
229	cmpl	$0, PCB_EXT(%edx)		/* has pcb extension? */
230	je	1f				/* If not, use the default */
231	movl	$1, PCPU(PRIVATE_TSS) 		/* mark use of private tss */
232	movl	PCB_EXT(%edx), %edi		/* new tss descriptor */
233	jmp	2f				/* Load it up */
234
2351:	/*
236	 * Use the common default TSS instead of our own.
237	 * Set our stack pointer into the TSS, it's set to just
238	 * below the PCB.  In C, common_tss.tss_esp0 = &pcb - 16;
239	 */
240	leal	-16(%edx), %ebx			/* leave space for vm86 */
241	movl	%ebx, PCPU(COMMON_TSS) + TSS_ESP0
242
243	/*
244	 * Test this CPU's  bit in the bitmap to see if this
245	 * CPU was using a private TSS.
246	 */
247	cmpl	$0, PCPU(PRIVATE_TSS)		/* Already using the common? */
248	je	3f				/* if so, skip reloading */
249	movl	$0, PCPU(PRIVATE_TSS)
250	PCPU_ADDR(COMMON_TSSD, %edi)
2512:
252	/* Move correct tss descriptor into GDT slot, then reload tr. */
253	movl	PCPU(TSS_GDT), %ebx		/* entry in GDT */
254	movl	0(%edi), %eax
255	movl	4(%edi), %esi
256	movl	%eax, 0(%ebx)
257	movl	%esi, 4(%ebx)
258	movl	$GPROC0_SEL*8, %esi		/* GSEL(GPROC0_SEL, SEL_KPL) */
259	ltr	%si
2603:
261
262	/* Copy the %fs and %gs selectors into this pcpu gdt */
263	leal	PCB_FSD(%edx), %esi
264	movl	PCPU(FSGS_GDT), %edi
265	movl	0(%esi), %eax		/* %fs selector */
266	movl	4(%esi), %ebx
267	movl	%eax, 0(%edi)
268	movl	%ebx, 4(%edi)
269	movl	8(%esi), %eax		/* %gs selector, comes straight after */
270	movl	12(%esi), %ebx
271	movl	%eax, 8(%edi)
272	movl	%ebx, 12(%edi)
273#endif
274	/* Restore context. */
275	movl	PCB_EBX(%edx),%ebx
276	movl	PCB_ESP(%edx),%esp
277	movl	PCB_EBP(%edx),%ebp
278	movl	PCB_ESI(%edx),%esi
279	movl	PCB_EDI(%edx),%edi
280	movl	PCB_EIP(%edx),%eax
281	movl	%eax,(%esp)
282	pushl	PCB_PSL(%edx)
283	popfl
284
285	movl	%edx, PCPU(CURPCB)
286	movl	TD_TID(%ecx),%eax
287	movl	%ecx, PCPU(CURTHREAD)		/* into next thread */
288
289	/*
290	 * Determine the LDT to use and load it if is the default one and
291	 * that is not the current one.
292	 */
293	movl	TD_PROC(%ecx),%eax
294	cmpl    $0,P_MD+MD_LDT(%eax)
295	jnz	1f
296	movl	_default_ldt,%eax
297	cmpl	PCPU(CURRENTLDT),%eax
298	je	2f
299	LLDT(_default_ldt)
300	movl	%eax,PCPU(CURRENTLDT)
301	jmp	2f
3021:
303	/* Load the LDT when it is not the default one. */
304	pushl	%edx				/* Preserve pointer to pcb. */
305	addl	$P_MD,%eax			/* Pointer to mdproc is arg. */
306	pushl	%eax
307	call	set_user_ldt
308	addl	$4,%esp
309	popl	%edx
3102:
311
312	/* This must be done after loading the user LDT. */
313	.globl	cpu_switch_load_gs
314cpu_switch_load_gs:
315	mov	PCB_GS(%edx),%gs
316
317	pushl	%edx
318	pushl	PCPU(CURTHREAD)
319	call	npxswitch
320	popl	%edx
321	popl	%edx
322
323	/* Test if debug registers should be restored. */
324	testl	$PCB_DBREGS,PCB_FLAGS(%edx)
325	jz      1f
326
327	/*
328	 * Restore debug registers.  The special code for dr7 is to
329	 * preserve the current values of its reserved bits.
330	 */
331	movl    PCB_DR6(%edx),%eax
332	movl    %eax,%dr6
333	movl    PCB_DR3(%edx),%eax
334	movl    %eax,%dr3
335	movl    PCB_DR2(%edx),%eax
336	movl    %eax,%dr2
337	movl    PCB_DR1(%edx),%eax
338	movl    %eax,%dr1
339	movl    PCB_DR0(%edx),%eax
340	movl    %eax,%dr0
341	movl	%dr7,%eax
342	andl    $0x0000fc00,%eax
343	movl    PCB_DR7(%edx),%ecx
344	andl	$~0x0000fc00,%ecx
345	orl     %ecx,%eax
346	movl    %eax,%dr7
3471:
348	ret
349
350#ifdef INVARIANTS
351badsw1:
352	pushal
353	pushl	$sw0_1
354	call	panic
355sw0_1:	.asciz	"cpu_throw: no newthread supplied"
356
357badsw2:
358	pushal
359	pushl	$sw0_2
360	call	panic
361sw0_2:	.asciz	"cpu_switch: no curthread supplied"
362
363badsw3:
364	pushal
365	pushl	$sw0_3
366	call	panic
367sw0_3:	.asciz	"cpu_switch: no newthread supplied"
368#endif
369END(cpu_switch)
370
371/*
372 * savectx(pcb)
373 * Update pcb, saving current processor state.
374 */
375ENTRY(savectx)
376	/* Fetch PCB. */
377	movl	4(%esp),%ecx
378
379	/* Save caller's return address.  Child won't execute this routine. */
380	movl	(%esp),%eax
381	movl	%eax,PCB_EIP(%ecx)
382
383	movl	%cr3,%eax
384	movl	%eax,PCB_CR3(%ecx)
385
386	movl	%ebx,PCB_EBX(%ecx)
387	movl	%esp,PCB_ESP(%ecx)
388	movl	%ebp,PCB_EBP(%ecx)
389	movl	%esi,PCB_ESI(%ecx)
390	movl	%edi,PCB_EDI(%ecx)
391	mov	%gs,PCB_GS(%ecx)
392	pushfl
393	popl	PCB_PSL(%ecx)
394
395	movl	%cr0,%eax
396	movl	%eax,PCB_CR0(%ecx)
397	movl	%cr2,%eax
398	movl	%eax,PCB_CR2(%ecx)
399	movl	%cr4,%eax
400	movl	%eax,PCB_CR4(%ecx)
401
402	movl	%dr0,%eax
403	movl	%eax,PCB_DR0(%ecx)
404	movl	%dr1,%eax
405	movl	%eax,PCB_DR1(%ecx)
406	movl	%dr2,%eax
407	movl	%eax,PCB_DR2(%ecx)
408	movl	%dr3,%eax
409	movl	%eax,PCB_DR3(%ecx)
410	movl	%dr6,%eax
411	movl	%eax,PCB_DR6(%ecx)
412	movl	%dr7,%eax
413	movl	%eax,PCB_DR7(%ecx)
414
415	mov	%ds,PCB_DS(%ecx)
416	mov	%es,PCB_ES(%ecx)
417	mov	%fs,PCB_FS(%ecx)
418	mov	%ss,PCB_SS(%ecx)
419
420	sgdt	PCB_GDT(%ecx)
421	sidt	PCB_IDT(%ecx)
422	sldt	PCB_LDT(%ecx)
423	str	PCB_TR(%ecx)
424
425	movl	$1,%eax
426	ret
427END(savectx)
428
429/*
430 * resumectx(pcb) __fastcall
431 * Resuming processor state from pcb.
432 */
433ENTRY(resumectx)
434	/* Restore GDT. */
435	lgdt	PCB_GDT(%ecx)
436
437	/* Restore segment registers */
438	movzwl	PCB_DS(%ecx),%eax
439	mov	%ax,%ds
440	movzwl	PCB_ES(%ecx),%eax
441	mov	%ax,%es
442	movzwl	PCB_FS(%ecx),%eax
443	mov	%ax,%fs
444	movzwl	PCB_GS(%ecx),%eax
445	movw	%ax,%gs
446	movzwl	PCB_SS(%ecx),%eax
447	mov	%ax,%ss
448
449	/* Restore CR2, CR4, CR3 and CR0 */
450	movl	PCB_CR2(%ecx),%eax
451	movl	%eax,%cr2
452	movl	PCB_CR4(%ecx),%eax
453	movl	%eax,%cr4
454	movl	PCB_CR3(%ecx),%eax
455	movl	%eax,%cr3
456	movl	PCB_CR0(%ecx),%eax
457	movl	%eax,%cr0
458	jmp	1f
4591:
460
461	/* Restore descriptor tables */
462	lidt	PCB_IDT(%ecx)
463	lldt	PCB_LDT(%ecx)
464
465#define SDT_SYS386TSS	9
466#define SDT_SYS386BSY	11
467	/* Clear "task busy" bit and reload TR */
468	movl	PCPU(TSS_GDT),%eax
469	andb	$(~SDT_SYS386BSY | SDT_SYS386TSS),5(%eax)
470	movzwl	PCB_TR(%ecx),%eax
471	ltr	%ax
472#undef SDT_SYS386TSS
473#undef SDT_SYS386BSY
474
475	/* Restore debug registers */
476	movl	PCB_DR0(%ecx),%eax
477	movl	%eax,%dr0
478	movl	PCB_DR1(%ecx),%eax
479	movl	%eax,%dr1
480	movl	PCB_DR2(%ecx),%eax
481	movl	%eax,%dr2
482	movl	PCB_DR3(%ecx),%eax
483	movl	%eax,%dr3
484	movl	PCB_DR6(%ecx),%eax
485	movl	%eax,%dr6
486	movl	PCB_DR7(%ecx),%eax
487	movl	%eax,%dr7
488
489	/* Restore other registers */
490	movl	PCB_EDI(%ecx),%edi
491	movl	PCB_ESI(%ecx),%esi
492	movl	PCB_EBP(%ecx),%ebp
493	movl	PCB_ESP(%ecx),%esp
494	movl	PCB_EBX(%ecx),%ebx
495
496	/* reload code selector by turning return into intersegmental return */
497	pushl	PCB_EIP(%ecx)
498	movl	$KCSEL,4(%esp)
499	xorl	%eax,%eax
500	lret
501END(resumectx)
502