1/*- 2 * Copyright (c) 2009 Yahoo! Inc. 3 * Copyright (c) 2011-2015 LSI Corp. 4 * Copyright (c) 2013-2016 Avago Technologies 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 29 * 30 */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD: stable/10/sys/dev/mpr/mpr.c 322661 2017-08-18 15:38:08Z ken $"); 34 35/* Communications core for Avago Technologies (LSI) MPT3 */ 36 37/* TODO Move headers to mprvar */ 38#include <sys/types.h> 39#include <sys/param.h> 40#include <sys/systm.h> 41#include <sys/kernel.h> 42#include <sys/selinfo.h> 43#include <sys/lock.h> 44#include <sys/mutex.h> 45#include <sys/module.h> 46#include <sys/bus.h> 47#include <sys/conf.h> 48#include <sys/bio.h> 49#include <sys/malloc.h> 50#include <sys/uio.h> 51#include <sys/sysctl.h> 52#include <sys/queue.h> 53#include <sys/kthread.h> 54#include <sys/taskqueue.h> 55#include <sys/endian.h> 56#include <sys/eventhandler.h> 57 58#include <machine/bus.h> 59#include <machine/resource.h> 60#include <sys/rman.h> 61#include <sys/proc.h> 62 63#include <dev/pci/pcivar.h> 64 65#include <cam/cam.h> 66#include <cam/cam_ccb.h> 67#include <cam/scsi/scsi_all.h> 68 69#include <dev/mpr/mpi/mpi2_type.h> 70#include <dev/mpr/mpi/mpi2.h> 71#include <dev/mpr/mpi/mpi2_ioc.h> 72#include <dev/mpr/mpi/mpi2_sas.h> 73#include <dev/mpr/mpi/mpi2_pci.h> 74#include <dev/mpr/mpi/mpi2_cnfg.h> 75#include <dev/mpr/mpi/mpi2_init.h> 76#include <dev/mpr/mpi/mpi2_tool.h> 77#include <dev/mpr/mpr_ioctl.h> 78#include <dev/mpr/mprvar.h> 79#include <dev/mpr/mpr_table.h> 80#include <dev/mpr/mpr_sas.h> 81 82static int mpr_diag_reset(struct mpr_softc *sc, int sleep_flag); 83static int mpr_init_queues(struct mpr_softc *sc); 84static int mpr_message_unit_reset(struct mpr_softc *sc, int sleep_flag); 85static int mpr_transition_operational(struct mpr_softc *sc); 86static int mpr_iocfacts_allocate(struct mpr_softc *sc, uint8_t attaching); 87static void mpr_iocfacts_free(struct mpr_softc *sc); 88static void mpr_startup(void *arg); 89static int mpr_send_iocinit(struct mpr_softc *sc); 90static int mpr_alloc_queues(struct mpr_softc *sc); 91static int mpr_alloc_replies(struct mpr_softc *sc); 92static int mpr_alloc_requests(struct mpr_softc *sc); 93static int mpr_alloc_nvme_prp_pages(struct mpr_softc *sc); 94static int mpr_attach_log(struct mpr_softc *sc); 95static __inline void mpr_complete_command(struct mpr_softc *sc, 96 struct mpr_command *cm); 97static void mpr_dispatch_event(struct mpr_softc *sc, uintptr_t data, 98 MPI2_EVENT_NOTIFICATION_REPLY *reply); 99static void mpr_config_complete(struct mpr_softc *sc, struct mpr_command *cm); 100static void mpr_periodic(void *); 101static int mpr_reregister_events(struct mpr_softc *sc); 102static void mpr_enqueue_request(struct mpr_softc *sc, struct mpr_command *cm); 103static int mpr_get_iocfacts(struct mpr_softc *sc, MPI2_IOC_FACTS_REPLY *facts); 104static int mpr_wait_db_ack(struct mpr_softc *sc, int timeout, int sleep_flag); 105SYSCTL_NODE(_hw, OID_AUTO, mpr, CTLFLAG_RD, 0, "MPR Driver Parameters"); 106 107MALLOC_DEFINE(M_MPR, "mpr", "mpr driver memory"); 108 109/* 110 * Do a "Diagnostic Reset" aka a hard reset. This should get the chip out of 111 * any state and back to its initialization state machine. 112 */ 113static char mpt2_reset_magic[] = { 0x00, 0x0f, 0x04, 0x0b, 0x02, 0x07, 0x0d }; 114 115/* 116 * Added this union to smoothly convert le64toh cm->cm_desc.Words. 117 * Compiler only supports uint64_t to be passed as an argument. 118 * Otherwise it will through this error: 119 * "aggregate value used where an integer was expected" 120 */ 121typedef union _reply_descriptor { 122 u64 word; 123 struct { 124 u32 low; 125 u32 high; 126 } u; 127} reply_descriptor, request_descriptor; 128 129/* Rate limit chain-fail messages to 1 per minute */ 130static struct timeval mpr_chainfail_interval = { 60, 0 }; 131 132/* 133 * sleep_flag can be either CAN_SLEEP or NO_SLEEP. 134 * If this function is called from process context, it can sleep 135 * and there is no harm to sleep, in case if this fuction is called 136 * from Interrupt handler, we can not sleep and need NO_SLEEP flag set. 137 * based on sleep flags driver will call either msleep, pause or DELAY. 138 * msleep and pause are of same variant, but pause is used when mpr_mtx 139 * is not hold by driver. 140 */ 141static int 142mpr_diag_reset(struct mpr_softc *sc,int sleep_flag) 143{ 144 uint32_t reg; 145 int i, error, tries = 0; 146 uint8_t first_wait_done = FALSE; 147 148 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 149 150 /* Clear any pending interrupts */ 151 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 152 153 /* 154 * Force NO_SLEEP for threads prohibited to sleep 155 * e.a Thread from interrupt handler are prohibited to sleep. 156 */ 157#if __FreeBSD_version >= 1000029 158 if (curthread->td_no_sleeping) 159#else //__FreeBSD_version < 1000029 160 if (curthread->td_pflags & TDP_NOSLEEPING) 161#endif //__FreeBSD_version >= 1000029 162 sleep_flag = NO_SLEEP; 163 164 /* Push the magic sequence */ 165 error = ETIMEDOUT; 166 while (tries++ < 20) { 167 for (i = 0; i < sizeof(mpt2_reset_magic); i++) 168 mpr_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 169 mpt2_reset_magic[i]); 170 171 /* wait 100 msec */ 172 if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP) 173 msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0, 174 "mprdiag", hz/10); 175 else if (sleep_flag == CAN_SLEEP) 176 pause("mprdiag", hz/10); 177 else 178 DELAY(100 * 1000); 179 180 reg = mpr_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); 181 if (reg & MPI2_DIAG_DIAG_WRITE_ENABLE) { 182 error = 0; 183 break; 184 } 185 } 186 if (error) 187 return (error); 188 189 /* Send the actual reset. XXX need to refresh the reg? */ 190 mpr_regwrite(sc, MPI2_HOST_DIAGNOSTIC_OFFSET, 191 reg | MPI2_DIAG_RESET_ADAPTER); 192 193 /* Wait up to 300 seconds in 50ms intervals */ 194 error = ETIMEDOUT; 195 for (i = 0; i < 6000; i++) { 196 /* 197 * Wait 50 msec. If this is the first time through, wait 256 198 * msec to satisfy Diag Reset timing requirements. 199 */ 200 if (first_wait_done) { 201 if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP) 202 msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0, 203 "mprdiag", hz/20); 204 else if (sleep_flag == CAN_SLEEP) 205 pause("mprdiag", hz/20); 206 else 207 DELAY(50 * 1000); 208 } else { 209 DELAY(256 * 1000); 210 first_wait_done = TRUE; 211 } 212 /* 213 * Check for the RESET_ADAPTER bit to be cleared first, then 214 * wait for the RESET state to be cleared, which takes a little 215 * longer. 216 */ 217 reg = mpr_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); 218 if (reg & MPI2_DIAG_RESET_ADAPTER) { 219 continue; 220 } 221 reg = mpr_regread(sc, MPI2_DOORBELL_OFFSET); 222 if ((reg & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_RESET) { 223 error = 0; 224 break; 225 } 226 } 227 if (error) 228 return (error); 229 230 mpr_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 0x0); 231 232 return (0); 233} 234 235static int 236mpr_message_unit_reset(struct mpr_softc *sc, int sleep_flag) 237{ 238 239 MPR_FUNCTRACE(sc); 240 241 mpr_regwrite(sc, MPI2_DOORBELL_OFFSET, 242 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET << 243 MPI2_DOORBELL_FUNCTION_SHIFT); 244 245 if (mpr_wait_db_ack(sc, 5, sleep_flag) != 0) { 246 mpr_dprint(sc, MPR_FAULT, "Doorbell handshake failed : <%s>\n", 247 __func__); 248 return (ETIMEDOUT); 249 } 250 251 return (0); 252} 253 254static int 255mpr_transition_ready(struct mpr_softc *sc) 256{ 257 uint32_t reg, state; 258 int error, tries = 0; 259 int sleep_flags; 260 261 MPR_FUNCTRACE(sc); 262 /* If we are in attach call, do not sleep */ 263 sleep_flags = (sc->mpr_flags & MPR_FLAGS_ATTACH_DONE) 264 ? CAN_SLEEP : NO_SLEEP; 265 266 error = 0; 267 while (tries++ < 1200) { 268 reg = mpr_regread(sc, MPI2_DOORBELL_OFFSET); 269 mpr_dprint(sc, MPR_INIT, "Doorbell= 0x%x\n", reg); 270 271 /* 272 * Ensure the IOC is ready to talk. If it's not, try 273 * resetting it. 274 */ 275 if (reg & MPI2_DOORBELL_USED) { 276 mpr_diag_reset(sc, sleep_flags); 277 DELAY(50000); 278 continue; 279 } 280 281 /* Is the adapter owned by another peer? */ 282 if ((reg & MPI2_DOORBELL_WHO_INIT_MASK) == 283 (MPI2_WHOINIT_PCI_PEER << MPI2_DOORBELL_WHO_INIT_SHIFT)) { 284 device_printf(sc->mpr_dev, "IOC is under the control " 285 "of another peer host, aborting initialization.\n"); 286 return (ENXIO); 287 } 288 289 state = reg & MPI2_IOC_STATE_MASK; 290 if (state == MPI2_IOC_STATE_READY) { 291 /* Ready to go! */ 292 error = 0; 293 break; 294 } else if (state == MPI2_IOC_STATE_FAULT) { 295 mpr_dprint(sc, MPR_FAULT, "IOC in fault state 0x%x\n", 296 state & MPI2_DOORBELL_FAULT_CODE_MASK); 297 mpr_diag_reset(sc, sleep_flags); 298 } else if (state == MPI2_IOC_STATE_OPERATIONAL) { 299 /* Need to take ownership */ 300 mpr_message_unit_reset(sc, sleep_flags); 301 } else if (state == MPI2_IOC_STATE_RESET) { 302 /* Wait a bit, IOC might be in transition */ 303 mpr_dprint(sc, MPR_FAULT, 304 "IOC in unexpected reset state\n"); 305 } else { 306 mpr_dprint(sc, MPR_FAULT, 307 "IOC in unknown state 0x%x\n", state); 308 error = EINVAL; 309 break; 310 } 311 312 /* Wait 50ms for things to settle down. */ 313 DELAY(50000); 314 } 315 316 if (error) 317 device_printf(sc->mpr_dev, "Cannot transition IOC to ready\n"); 318 return (error); 319} 320 321static int 322mpr_transition_operational(struct mpr_softc *sc) 323{ 324 uint32_t reg, state; 325 int error; 326 327 MPR_FUNCTRACE(sc); 328 329 error = 0; 330 reg = mpr_regread(sc, MPI2_DOORBELL_OFFSET); 331 mpr_dprint(sc, MPR_INIT, "Doorbell= 0x%x\n", reg); 332 333 state = reg & MPI2_IOC_STATE_MASK; 334 if (state != MPI2_IOC_STATE_READY) { 335 if ((error = mpr_transition_ready(sc)) != 0) { 336 mpr_dprint(sc, MPR_FAULT, 337 "%s failed to transition ready\n", __func__); 338 return (error); 339 } 340 } 341 342 error = mpr_send_iocinit(sc); 343 return (error); 344} 345 346/* 347 * This is called during attach and when re-initializing due to a Diag Reset. 348 * IOC Facts is used to allocate many of the structures needed by the driver. 349 * If called from attach, de-allocation is not required because the driver has 350 * not allocated any structures yet, but if called from a Diag Reset, previously 351 * allocated structures based on IOC Facts will need to be freed and re- 352 * allocated bases on the latest IOC Facts. 353 */ 354static int 355mpr_iocfacts_allocate(struct mpr_softc *sc, uint8_t attaching) 356{ 357 int error; 358 Mpi2IOCFactsReply_t saved_facts; 359 uint8_t saved_mode, reallocating; 360 361 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 362 363 /* Save old IOC Facts and then only reallocate if Facts have changed */ 364 if (!attaching) { 365 bcopy(sc->facts, &saved_facts, sizeof(MPI2_IOC_FACTS_REPLY)); 366 } 367 368 /* 369 * Get IOC Facts. In all cases throughout this function, panic if doing 370 * a re-initialization and only return the error if attaching so the OS 371 * can handle it. 372 */ 373 if ((error = mpr_get_iocfacts(sc, sc->facts)) != 0) { 374 if (attaching) { 375 mpr_dprint(sc, MPR_FAULT, "%s failed to get IOC Facts " 376 "with error %d\n", __func__, error); 377 return (error); 378 } else { 379 panic("%s failed to get IOC Facts with error %d\n", 380 __func__, error); 381 } 382 } 383 384 MPR_DPRINT_PAGE(sc, MPR_XINFO, iocfacts, sc->facts); 385 386 snprintf(sc->fw_version, sizeof(sc->fw_version), 387 "%02d.%02d.%02d.%02d", 388 sc->facts->FWVersion.Struct.Major, 389 sc->facts->FWVersion.Struct.Minor, 390 sc->facts->FWVersion.Struct.Unit, 391 sc->facts->FWVersion.Struct.Dev); 392 393 mpr_printf(sc, "Firmware: %s, Driver: %s\n", sc->fw_version, 394 MPR_DRIVER_VERSION); 395 mpr_printf(sc, "IOCCapabilities: %b\n", sc->facts->IOCCapabilities, 396 "\20" "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf" 397 "\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR" 398 "\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc" 399 "\22FastPath" "\23RDPQArray" "\24AtomicReqDesc" "\25PCIeSRIOV"); 400 401 /* 402 * If the chip doesn't support event replay then a hard reset will be 403 * required to trigger a full discovery. Do the reset here then 404 * retransition to Ready. A hard reset might have already been done, 405 * but it doesn't hurt to do it again. Only do this if attaching, not 406 * for a Diag Reset. 407 */ 408 if (attaching) { 409 if ((sc->facts->IOCCapabilities & 410 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY) == 0) { 411 mpr_diag_reset(sc, NO_SLEEP); 412 if ((error = mpr_transition_ready(sc)) != 0) { 413 mpr_dprint(sc, MPR_FAULT, "%s failed to " 414 "transition to ready with error %d\n", 415 __func__, error); 416 return (error); 417 } 418 } 419 } 420 421 /* 422 * Set flag if IR Firmware is loaded. If the RAID Capability has 423 * changed from the previous IOC Facts, log a warning, but only if 424 * checking this after a Diag Reset and not during attach. 425 */ 426 saved_mode = sc->ir_firmware; 427 if (sc->facts->IOCCapabilities & 428 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) 429 sc->ir_firmware = 1; 430 if (!attaching) { 431 if (sc->ir_firmware != saved_mode) { 432 mpr_dprint(sc, MPR_FAULT, "%s new IR/IT mode in IOC " 433 "Facts does not match previous mode\n", __func__); 434 } 435 } 436 437 /* Only deallocate and reallocate if relevant IOC Facts have changed */ 438 reallocating = FALSE; 439 sc->mpr_flags &= ~MPR_FLAGS_REALLOCATED; 440 441 if ((!attaching) && 442 ((saved_facts.MsgVersion != sc->facts->MsgVersion) || 443 (saved_facts.HeaderVersion != sc->facts->HeaderVersion) || 444 (saved_facts.MaxChainDepth != sc->facts->MaxChainDepth) || 445 (saved_facts.RequestCredit != sc->facts->RequestCredit) || 446 (saved_facts.ProductID != sc->facts->ProductID) || 447 (saved_facts.IOCCapabilities != sc->facts->IOCCapabilities) || 448 (saved_facts.IOCRequestFrameSize != 449 sc->facts->IOCRequestFrameSize) || 450 (saved_facts.IOCMaxChainSegmentSize != 451 sc->facts->IOCMaxChainSegmentSize) || 452 (saved_facts.MaxTargets != sc->facts->MaxTargets) || 453 (saved_facts.MaxSasExpanders != sc->facts->MaxSasExpanders) || 454 (saved_facts.MaxEnclosures != sc->facts->MaxEnclosures) || 455 (saved_facts.HighPriorityCredit != sc->facts->HighPriorityCredit) || 456 (saved_facts.MaxReplyDescriptorPostQueueDepth != 457 sc->facts->MaxReplyDescriptorPostQueueDepth) || 458 (saved_facts.ReplyFrameSize != sc->facts->ReplyFrameSize) || 459 (saved_facts.MaxVolumes != sc->facts->MaxVolumes) || 460 (saved_facts.MaxPersistentEntries != 461 sc->facts->MaxPersistentEntries))) { 462 reallocating = TRUE; 463 464 /* Record that we reallocated everything */ 465 sc->mpr_flags |= MPR_FLAGS_REALLOCATED; 466 } 467 468 /* 469 * Some things should be done if attaching or re-allocating after a Diag 470 * Reset, but are not needed after a Diag Reset if the FW has not 471 * changed. 472 */ 473 if (attaching || reallocating) { 474 /* 475 * Check if controller supports FW diag buffers and set flag to 476 * enable each type. 477 */ 478 if (sc->facts->IOCCapabilities & 479 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) 480 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_TRACE]. 481 enabled = TRUE; 482 if (sc->facts->IOCCapabilities & 483 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) 484 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_SNAPSHOT]. 485 enabled = TRUE; 486 if (sc->facts->IOCCapabilities & 487 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) 488 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_EXTENDED]. 489 enabled = TRUE; 490 491 /* 492 * Set flags for some supported items. 493 */ 494 if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) 495 sc->eedp_enabled = TRUE; 496 if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) 497 sc->control_TLR = TRUE; 498 if (sc->facts->IOCCapabilities & 499 MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ) 500 sc->atomic_desc_capable = TRUE; 501 502 /* 503 * Size the queues. Since the reply queues always need one free 504 * entry, we'll just deduct one reply message here. 505 */ 506 sc->num_reqs = MIN(MPR_REQ_FRAMES, sc->facts->RequestCredit); 507 sc->num_replies = MIN(MPR_REPLY_FRAMES + MPR_EVT_REPLY_FRAMES, 508 sc->facts->MaxReplyDescriptorPostQueueDepth) - 1; 509 510 /* 511 * Initialize all Tail Queues 512 */ 513 TAILQ_INIT(&sc->req_list); 514 TAILQ_INIT(&sc->high_priority_req_list); 515 TAILQ_INIT(&sc->chain_list); 516 TAILQ_INIT(&sc->prp_page_list); 517 TAILQ_INIT(&sc->tm_list); 518 } 519 520 /* 521 * If doing a Diag Reset and the FW is significantly different 522 * (reallocating will be set above in IOC Facts comparison), then all 523 * buffers based on the IOC Facts will need to be freed before they are 524 * reallocated. 525 */ 526 if (reallocating) { 527 mpr_iocfacts_free(sc); 528 mprsas_realloc_targets(sc, saved_facts.MaxTargets + 529 saved_facts.MaxVolumes); 530 } 531 532 /* 533 * Any deallocation has been completed. Now start reallocating 534 * if needed. Will only need to reallocate if attaching or if the new 535 * IOC Facts are different from the previous IOC Facts after a Diag 536 * Reset. Targets have already been allocated above if needed. 537 */ 538 if (attaching || reallocating) { 539 if (((error = mpr_alloc_queues(sc)) != 0) || 540 ((error = mpr_alloc_replies(sc)) != 0) || 541 ((error = mpr_alloc_requests(sc)) != 0)) { 542 if (attaching ) { 543 mpr_dprint(sc, MPR_FAULT, "%s failed to alloc " 544 "queues with error %d\n", __func__, error); 545 mpr_free(sc); 546 return (error); 547 } else { 548 panic("%s failed to alloc queues with error " 549 "%d\n", __func__, error); 550 } 551 } 552 } 553 554 /* Always initialize the queues */ 555 bzero(sc->free_queue, sc->fqdepth * 4); 556 mpr_init_queues(sc); 557 558 /* 559 * Always get the chip out of the reset state, but only panic if not 560 * attaching. If attaching and there is an error, that is handled by 561 * the OS. 562 */ 563 error = mpr_transition_operational(sc); 564 if (error != 0) { 565 if (attaching) { 566 mpr_printf(sc, "%s failed to transition to operational " 567 "with error %d\n", __func__, error); 568 mpr_free(sc); 569 return (error); 570 } else { 571 panic("%s failed to transition to operational with " 572 "error %d\n", __func__, error); 573 } 574 } 575 576 /* 577 * Finish the queue initialization. 578 * These are set here instead of in mpr_init_queues() because the 579 * IOC resets these values during the state transition in 580 * mpr_transition_operational(). The free index is set to 1 581 * because the corresponding index in the IOC is set to 0, and the 582 * IOC treats the queues as full if both are set to the same value. 583 * Hence the reason that the queue can't hold all of the possible 584 * replies. 585 */ 586 sc->replypostindex = 0; 587 mpr_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex); 588 mpr_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 0); 589 590 /* 591 * Attach the subsystems so they can prepare their event masks. 592 */ 593 /* XXX Should be dynamic so that IM/IR and user modules can attach */ 594 if (attaching) { 595 if (((error = mpr_attach_log(sc)) != 0) || 596 ((error = mpr_attach_sas(sc)) != 0) || 597 ((error = mpr_attach_user(sc)) != 0)) { 598 mpr_printf(sc, "%s failed to attach all subsystems: " 599 "error %d\n", __func__, error); 600 mpr_free(sc); 601 return (error); 602 } 603 604 if ((error = mpr_pci_setup_interrupts(sc)) != 0) { 605 mpr_printf(sc, "%s failed to setup interrupts\n", 606 __func__); 607 mpr_free(sc); 608 return (error); 609 } 610 } 611 612 return (error); 613} 614 615/* 616 * This is called if memory is being free (during detach for example) and when 617 * buffers need to be reallocated due to a Diag Reset. 618 */ 619static void 620mpr_iocfacts_free(struct mpr_softc *sc) 621{ 622 struct mpr_command *cm; 623 int i; 624 625 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 626 627 if (sc->free_busaddr != 0) 628 bus_dmamap_unload(sc->queues_dmat, sc->queues_map); 629 if (sc->free_queue != NULL) 630 bus_dmamem_free(sc->queues_dmat, sc->free_queue, 631 sc->queues_map); 632 if (sc->queues_dmat != NULL) 633 bus_dma_tag_destroy(sc->queues_dmat); 634 635 if (sc->chain_busaddr != 0) 636 bus_dmamap_unload(sc->chain_dmat, sc->chain_map); 637 if (sc->chain_frames != NULL) 638 bus_dmamem_free(sc->chain_dmat, sc->chain_frames, 639 sc->chain_map); 640 if (sc->chain_dmat != NULL) 641 bus_dma_tag_destroy(sc->chain_dmat); 642 643 if (sc->sense_busaddr != 0) 644 bus_dmamap_unload(sc->sense_dmat, sc->sense_map); 645 if (sc->sense_frames != NULL) 646 bus_dmamem_free(sc->sense_dmat, sc->sense_frames, 647 sc->sense_map); 648 if (sc->sense_dmat != NULL) 649 bus_dma_tag_destroy(sc->sense_dmat); 650 651 if (sc->prp_page_busaddr != 0) 652 bus_dmamap_unload(sc->prp_page_dmat, sc->prp_page_map); 653 if (sc->prp_pages != NULL) 654 bus_dmamem_free(sc->prp_page_dmat, sc->prp_pages, 655 sc->prp_page_map); 656 if (sc->prp_page_dmat != NULL) 657 bus_dma_tag_destroy(sc->prp_page_dmat); 658 659 if (sc->reply_busaddr != 0) 660 bus_dmamap_unload(sc->reply_dmat, sc->reply_map); 661 if (sc->reply_frames != NULL) 662 bus_dmamem_free(sc->reply_dmat, sc->reply_frames, 663 sc->reply_map); 664 if (sc->reply_dmat != NULL) 665 bus_dma_tag_destroy(sc->reply_dmat); 666 667 if (sc->req_busaddr != 0) 668 bus_dmamap_unload(sc->req_dmat, sc->req_map); 669 if (sc->req_frames != NULL) 670 bus_dmamem_free(sc->req_dmat, sc->req_frames, sc->req_map); 671 if (sc->req_dmat != NULL) 672 bus_dma_tag_destroy(sc->req_dmat); 673 674 if (sc->chains != NULL) 675 free(sc->chains, M_MPR); 676 if (sc->prps != NULL) 677 free(sc->prps, M_MPR); 678 if (sc->commands != NULL) { 679 for (i = 1; i < sc->num_reqs; i++) { 680 cm = &sc->commands[i]; 681 bus_dmamap_destroy(sc->buffer_dmat, cm->cm_dmamap); 682 } 683 free(sc->commands, M_MPR); 684 } 685 if (sc->buffer_dmat != NULL) 686 bus_dma_tag_destroy(sc->buffer_dmat); 687} 688 689/* 690 * The terms diag reset and hard reset are used interchangeably in the MPI 691 * docs to mean resetting the controller chip. In this code diag reset 692 * cleans everything up, and the hard reset function just sends the reset 693 * sequence to the chip. This should probably be refactored so that every 694 * subsystem gets a reset notification of some sort, and can clean up 695 * appropriately. 696 */ 697int 698mpr_reinit(struct mpr_softc *sc) 699{ 700 int error; 701 struct mprsas_softc *sassc; 702 703 sassc = sc->sassc; 704 705 MPR_FUNCTRACE(sc); 706 707 mtx_assert(&sc->mpr_mtx, MA_OWNED); 708 709 if (sc->mpr_flags & MPR_FLAGS_DIAGRESET) { 710 mpr_dprint(sc, MPR_INIT, "%s reset already in progress\n", 711 __func__); 712 return 0; 713 } 714 715 mpr_dprint(sc, MPR_INFO, "Reinitializing controller,\n"); 716 /* make sure the completion callbacks can recognize they're getting 717 * a NULL cm_reply due to a reset. 718 */ 719 sc->mpr_flags |= MPR_FLAGS_DIAGRESET; 720 721 /* 722 * Mask interrupts here. 723 */ 724 mpr_dprint(sc, MPR_INIT, "%s mask interrupts\n", __func__); 725 mpr_mask_intr(sc); 726 727 error = mpr_diag_reset(sc, CAN_SLEEP); 728 if (error != 0) { 729 panic("%s hard reset failed with error %d\n", __func__, error); 730 } 731 732 /* Restore the PCI state, including the MSI-X registers */ 733 mpr_pci_restore(sc); 734 735 /* Give the I/O subsystem special priority to get itself prepared */ 736 mprsas_handle_reinit(sc); 737 738 /* 739 * Get IOC Facts and allocate all structures based on this information. 740 * The attach function will also call mpr_iocfacts_allocate at startup. 741 * If relevant values have changed in IOC Facts, this function will free 742 * all of the memory based on IOC Facts and reallocate that memory. 743 */ 744 if ((error = mpr_iocfacts_allocate(sc, FALSE)) != 0) { 745 panic("%s IOC Facts based allocation failed with error %d\n", 746 __func__, error); 747 } 748 749 /* 750 * Mapping structures will be re-allocated after getting IOC Page8, so 751 * free these structures here. 752 */ 753 mpr_mapping_exit(sc); 754 755 /* 756 * The static page function currently read is IOC Page8. Others can be 757 * added in future. It's possible that the values in IOC Page8 have 758 * changed after a Diag Reset due to user modification, so always read 759 * these. Interrupts are masked, so unmask them before getting config 760 * pages. 761 */ 762 mpr_unmask_intr(sc); 763 sc->mpr_flags &= ~MPR_FLAGS_DIAGRESET; 764 mpr_base_static_config_pages(sc); 765 766 /* 767 * Some mapping info is based in IOC Page8 data, so re-initialize the 768 * mapping tables. 769 */ 770 mpr_mapping_initialize(sc); 771 772 /* 773 * Restart will reload the event masks clobbered by the reset, and 774 * then enable the port. 775 */ 776 mpr_reregister_events(sc); 777 778 /* the end of discovery will release the simq, so we're done. */ 779 mpr_dprint(sc, MPR_INFO, "%s finished sc %p post %u free %u\n", 780 __func__, sc, sc->replypostindex, sc->replyfreeindex); 781 mprsas_release_simq_reinit(sassc); 782 783 return 0; 784} 785 786/* Wait for the chip to ACK a word that we've put into its FIFO 787 * Wait for <timeout> seconds. In single loop wait for busy loop 788 * for 500 microseconds. 789 * Total is [ 0.5 * (2000 * <timeout>) ] in miliseconds. 790 * */ 791static int 792mpr_wait_db_ack(struct mpr_softc *sc, int timeout, int sleep_flag) 793{ 794 u32 cntdn, count; 795 u32 int_status; 796 u32 doorbell; 797 798 count = 0; 799 cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; 800 do { 801 int_status = mpr_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); 802 if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { 803 mpr_dprint(sc, MPR_INIT, "%s: successful count(%d), " 804 "timeout(%d)\n", __func__, count, timeout); 805 return 0; 806 } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { 807 doorbell = mpr_regread(sc, MPI2_DOORBELL_OFFSET); 808 if ((doorbell & MPI2_IOC_STATE_MASK) == 809 MPI2_IOC_STATE_FAULT) { 810 mpr_dprint(sc, MPR_FAULT, 811 "fault_state(0x%04x)!\n", doorbell); 812 return (EFAULT); 813 } 814 } else if (int_status == 0xFFFFFFFF) 815 goto out; 816 817 /* 818 * If it can sleep, sleep for 1 milisecond, else busy loop for 819 * 0.5 milisecond 820 */ 821 if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP) 822 msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0, "mprdba", 823 hz/1000); 824 else if (sleep_flag == CAN_SLEEP) 825 pause("mprdba", hz/1000); 826 else 827 DELAY(500); 828 count++; 829 } while (--cntdn); 830 831out: 832 mpr_dprint(sc, MPR_FAULT, "%s: failed due to timeout count(%d), " 833 "int_status(%x)!\n", __func__, count, int_status); 834 return (ETIMEDOUT); 835} 836 837/* Wait for the chip to signal that the next word in its FIFO can be fetched */ 838static int 839mpr_wait_db_int(struct mpr_softc *sc) 840{ 841 int retry; 842 843 for (retry = 0; retry < MPR_DB_MAX_WAIT; retry++) { 844 if ((mpr_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) & 845 MPI2_HIS_IOC2SYS_DB_STATUS) != 0) 846 return (0); 847 DELAY(2000); 848 } 849 return (ETIMEDOUT); 850} 851 852/* Step through the synchronous command state machine, i.e. "Doorbell mode" */ 853static int 854mpr_request_sync(struct mpr_softc *sc, void *req, MPI2_DEFAULT_REPLY *reply, 855 int req_sz, int reply_sz, int timeout) 856{ 857 uint32_t *data32; 858 uint16_t *data16; 859 int i, count, ioc_sz, residual; 860 int sleep_flags = CAN_SLEEP; 861 862#if __FreeBSD_version >= 1000029 863 if (curthread->td_no_sleeping) 864#else //__FreeBSD_version < 1000029 865 if (curthread->td_pflags & TDP_NOSLEEPING) 866#endif //__FreeBSD_version >= 1000029 867 sleep_flags = NO_SLEEP; 868 869 /* Step 1 */ 870 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 871 872 /* Step 2 */ 873 if (mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) 874 return (EBUSY); 875 876 /* Step 3 877 * Announce that a message is coming through the doorbell. Messages 878 * are pushed at 32bit words, so round up if needed. 879 */ 880 count = (req_sz + 3) / 4; 881 mpr_regwrite(sc, MPI2_DOORBELL_OFFSET, 882 (MPI2_FUNCTION_HANDSHAKE << MPI2_DOORBELL_FUNCTION_SHIFT) | 883 (count << MPI2_DOORBELL_ADD_DWORDS_SHIFT)); 884 885 /* Step 4 */ 886 if (mpr_wait_db_int(sc) || 887 (mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) == 0) { 888 mpr_dprint(sc, MPR_FAULT, "Doorbell failed to activate\n"); 889 return (ENXIO); 890 } 891 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 892 if (mpr_wait_db_ack(sc, 5, sleep_flags) != 0) { 893 mpr_dprint(sc, MPR_FAULT, "Doorbell handshake failed\n"); 894 return (ENXIO); 895 } 896 897 /* Step 5 */ 898 /* Clock out the message data synchronously in 32-bit dwords*/ 899 data32 = (uint32_t *)req; 900 for (i = 0; i < count; i++) { 901 mpr_regwrite(sc, MPI2_DOORBELL_OFFSET, htole32(data32[i])); 902 if (mpr_wait_db_ack(sc, 5, sleep_flags) != 0) { 903 mpr_dprint(sc, MPR_FAULT, 904 "Timeout while writing doorbell\n"); 905 return (ENXIO); 906 } 907 } 908 909 /* Step 6 */ 910 /* Clock in the reply in 16-bit words. The total length of the 911 * message is always in the 4th byte, so clock out the first 2 words 912 * manually, then loop the rest. 913 */ 914 data16 = (uint16_t *)reply; 915 if (mpr_wait_db_int(sc) != 0) { 916 mpr_dprint(sc, MPR_FAULT, "Timeout reading doorbell 0\n"); 917 return (ENXIO); 918 } 919 data16[0] = 920 mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; 921 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 922 if (mpr_wait_db_int(sc) != 0) { 923 mpr_dprint(sc, MPR_FAULT, "Timeout reading doorbell 1\n"); 924 return (ENXIO); 925 } 926 data16[1] = 927 mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; 928 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 929 930 /* Number of 32bit words in the message */ 931 ioc_sz = reply->MsgLength; 932 933 /* 934 * Figure out how many 16bit words to clock in without overrunning. 935 * The precision loss with dividing reply_sz can safely be 936 * ignored because the messages can only be multiples of 32bits. 937 */ 938 residual = 0; 939 count = MIN((reply_sz / 4), ioc_sz) * 2; 940 if (count < ioc_sz * 2) { 941 residual = ioc_sz * 2 - count; 942 mpr_dprint(sc, MPR_ERROR, "Driver error, throwing away %d " 943 "residual message words\n", residual); 944 } 945 946 for (i = 2; i < count; i++) { 947 if (mpr_wait_db_int(sc) != 0) { 948 mpr_dprint(sc, MPR_FAULT, 949 "Timeout reading doorbell %d\n", i); 950 return (ENXIO); 951 } 952 data16[i] = mpr_regread(sc, MPI2_DOORBELL_OFFSET) & 953 MPI2_DOORBELL_DATA_MASK; 954 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 955 } 956 957 /* 958 * Pull out residual words that won't fit into the provided buffer. 959 * This keeps the chip from hanging due to a driver programming 960 * error. 961 */ 962 while (residual--) { 963 if (mpr_wait_db_int(sc) != 0) { 964 mpr_dprint(sc, MPR_FAULT, "Timeout reading doorbell\n"); 965 return (ENXIO); 966 } 967 (void)mpr_regread(sc, MPI2_DOORBELL_OFFSET); 968 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 969 } 970 971 /* Step 7 */ 972 if (mpr_wait_db_int(sc) != 0) { 973 mpr_dprint(sc, MPR_FAULT, "Timeout waiting to exit doorbell\n"); 974 return (ENXIO); 975 } 976 if (mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) 977 mpr_dprint(sc, MPR_FAULT, "Warning, doorbell still active\n"); 978 mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 979 980 return (0); 981} 982 983static void 984mpr_enqueue_request(struct mpr_softc *sc, struct mpr_command *cm) 985{ 986 request_descriptor rd; 987 988 MPR_FUNCTRACE(sc); 989 mpr_dprint(sc, MPR_TRACE, "SMID %u cm %p ccb %p\n", 990 cm->cm_desc.Default.SMID, cm, cm->cm_ccb); 991 992 if (sc->mpr_flags & MPR_FLAGS_ATTACH_DONE && !(sc->mpr_flags & 993 MPR_FLAGS_SHUTDOWN)) 994 mtx_assert(&sc->mpr_mtx, MA_OWNED); 995 996 if (++sc->io_cmds_active > sc->io_cmds_highwater) 997 sc->io_cmds_highwater++; 998 999 if (sc->atomic_desc_capable) { 1000 rd.u.low = cm->cm_desc.Words.Low; 1001 mpr_regwrite(sc, MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET, 1002 rd.u.low); 1003 } else { 1004 rd.u.low = cm->cm_desc.Words.Low; 1005 rd.u.high = cm->cm_desc.Words.High; 1006 rd.word = htole64(rd.word); 1007 mpr_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET, 1008 rd.u.low); 1009 mpr_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET, 1010 rd.u.high); 1011 } 1012} 1013 1014/* 1015 * Just the FACTS, ma'am. 1016 */ 1017static int 1018mpr_get_iocfacts(struct mpr_softc *sc, MPI2_IOC_FACTS_REPLY *facts) 1019{ 1020 MPI2_DEFAULT_REPLY *reply; 1021 MPI2_IOC_FACTS_REQUEST request; 1022 int error, req_sz, reply_sz; 1023 1024 MPR_FUNCTRACE(sc); 1025 1026 req_sz = sizeof(MPI2_IOC_FACTS_REQUEST); 1027 reply_sz = sizeof(MPI2_IOC_FACTS_REPLY); 1028 reply = (MPI2_DEFAULT_REPLY *)facts; 1029 1030 bzero(&request, req_sz); 1031 request.Function = MPI2_FUNCTION_IOC_FACTS; 1032 error = mpr_request_sync(sc, &request, reply, req_sz, reply_sz, 5); 1033 1034 return (error); 1035} 1036 1037static int 1038mpr_send_iocinit(struct mpr_softc *sc) 1039{ 1040 MPI2_IOC_INIT_REQUEST init; 1041 MPI2_DEFAULT_REPLY reply; 1042 int req_sz, reply_sz, error; 1043 struct timeval now; 1044 uint64_t time_in_msec; 1045 1046 MPR_FUNCTRACE(sc); 1047 1048 req_sz = sizeof(MPI2_IOC_INIT_REQUEST); 1049 reply_sz = sizeof(MPI2_IOC_INIT_REPLY); 1050 bzero(&init, req_sz); 1051 bzero(&reply, reply_sz); 1052 1053 /* 1054 * Fill in the init block. Note that most addresses are 1055 * deliberately in the lower 32bits of memory. This is a micro- 1056 * optimzation for PCI/PCIX, though it's not clear if it helps PCIe. 1057 */ 1058 init.Function = MPI2_FUNCTION_IOC_INIT; 1059 init.WhoInit = MPI2_WHOINIT_HOST_DRIVER; 1060 init.MsgVersion = htole16(MPI2_VERSION); 1061 init.HeaderVersion = htole16(MPI2_HEADER_VERSION); 1062 init.SystemRequestFrameSize = htole16(sc->facts->IOCRequestFrameSize); 1063 init.ReplyDescriptorPostQueueDepth = htole16(sc->pqdepth); 1064 init.ReplyFreeQueueDepth = htole16(sc->fqdepth); 1065 init.SenseBufferAddressHigh = 0; 1066 init.SystemReplyAddressHigh = 0; 1067 init.SystemRequestFrameBaseAddress.High = 0; 1068 init.SystemRequestFrameBaseAddress.Low = 1069 htole32((uint32_t)sc->req_busaddr); 1070 init.ReplyDescriptorPostQueueAddress.High = 0; 1071 init.ReplyDescriptorPostQueueAddress.Low = 1072 htole32((uint32_t)sc->post_busaddr); 1073 init.ReplyFreeQueueAddress.High = 0; 1074 init.ReplyFreeQueueAddress.Low = htole32((uint32_t)sc->free_busaddr); 1075 getmicrotime(&now); 1076 time_in_msec = (now.tv_sec * 1000 + now.tv_usec/1000); 1077 init.TimeStamp.High = htole32((time_in_msec >> 32) & 0xFFFFFFFF); 1078 init.TimeStamp.Low = htole32(time_in_msec & 0xFFFFFFFF); 1079 init.HostPageSize = HOST_PAGE_SIZE_4K; 1080 1081 error = mpr_request_sync(sc, &init, &reply, req_sz, reply_sz, 5); 1082 if ((reply.IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) 1083 error = ENXIO; 1084 1085 mpr_dprint(sc, MPR_INIT, "IOCInit status= 0x%x\n", reply.IOCStatus); 1086 return (error); 1087} 1088 1089void 1090mpr_memaddr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1091{ 1092 bus_addr_t *addr; 1093 1094 addr = arg; 1095 *addr = segs[0].ds_addr; 1096} 1097 1098static int 1099mpr_alloc_queues(struct mpr_softc *sc) 1100{ 1101 bus_addr_t queues_busaddr; 1102 uint8_t *queues; 1103 int qsize, fqsize, pqsize; 1104 1105 /* 1106 * The reply free queue contains 4 byte entries in multiples of 16 and 1107 * aligned on a 16 byte boundary. There must always be an unused entry. 1108 * This queue supplies fresh reply frames for the firmware to use. 1109 * 1110 * The reply descriptor post queue contains 8 byte entries in 1111 * multiples of 16 and aligned on a 16 byte boundary. This queue 1112 * contains filled-in reply frames sent from the firmware to the host. 1113 * 1114 * These two queues are allocated together for simplicity. 1115 */ 1116 sc->fqdepth = roundup2((sc->num_replies + 1), 16); 1117 sc->pqdepth = roundup2((sc->num_replies + 1), 16); 1118 fqsize= sc->fqdepth * 4; 1119 pqsize = sc->pqdepth * 8; 1120 qsize = fqsize + pqsize; 1121 1122 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1123 16, 0, /* algnmnt, boundary */ 1124 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1125 BUS_SPACE_MAXADDR, /* highaddr */ 1126 NULL, NULL, /* filter, filterarg */ 1127 qsize, /* maxsize */ 1128 1, /* nsegments */ 1129 qsize, /* maxsegsize */ 1130 0, /* flags */ 1131 NULL, NULL, /* lockfunc, lockarg */ 1132 &sc->queues_dmat)) { 1133 device_printf(sc->mpr_dev, "Cannot allocate queues DMA tag\n"); 1134 return (ENOMEM); 1135 } 1136 if (bus_dmamem_alloc(sc->queues_dmat, (void **)&queues, BUS_DMA_NOWAIT, 1137 &sc->queues_map)) { 1138 device_printf(sc->mpr_dev, "Cannot allocate queues memory\n"); 1139 return (ENOMEM); 1140 } 1141 bzero(queues, qsize); 1142 bus_dmamap_load(sc->queues_dmat, sc->queues_map, queues, qsize, 1143 mpr_memaddr_cb, &queues_busaddr, 0); 1144 1145 sc->free_queue = (uint32_t *)queues; 1146 sc->free_busaddr = queues_busaddr; 1147 sc->post_queue = (MPI2_REPLY_DESCRIPTORS_UNION *)(queues + fqsize); 1148 sc->post_busaddr = queues_busaddr + fqsize; 1149 1150 return (0); 1151} 1152 1153static int 1154mpr_alloc_replies(struct mpr_softc *sc) 1155{ 1156 int rsize, num_replies; 1157 1158 /* 1159 * sc->num_replies should be one less than sc->fqdepth. We need to 1160 * allocate space for sc->fqdepth replies, but only sc->num_replies 1161 * replies can be used at once. 1162 */ 1163 num_replies = max(sc->fqdepth, sc->num_replies); 1164 1165 rsize = sc->facts->ReplyFrameSize * num_replies * 4; 1166 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1167 4, 0, /* algnmnt, boundary */ 1168 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1169 BUS_SPACE_MAXADDR, /* highaddr */ 1170 NULL, NULL, /* filter, filterarg */ 1171 rsize, /* maxsize */ 1172 1, /* nsegments */ 1173 rsize, /* maxsegsize */ 1174 0, /* flags */ 1175 NULL, NULL, /* lockfunc, lockarg */ 1176 &sc->reply_dmat)) { 1177 device_printf(sc->mpr_dev, "Cannot allocate replies DMA tag\n"); 1178 return (ENOMEM); 1179 } 1180 if (bus_dmamem_alloc(sc->reply_dmat, (void **)&sc->reply_frames, 1181 BUS_DMA_NOWAIT, &sc->reply_map)) { 1182 device_printf(sc->mpr_dev, "Cannot allocate replies memory\n"); 1183 return (ENOMEM); 1184 } 1185 bzero(sc->reply_frames, rsize); 1186 bus_dmamap_load(sc->reply_dmat, sc->reply_map, sc->reply_frames, rsize, 1187 mpr_memaddr_cb, &sc->reply_busaddr, 0); 1188 1189 return (0); 1190} 1191 1192static int 1193mpr_alloc_requests(struct mpr_softc *sc) 1194{ 1195 struct mpr_command *cm; 1196 struct mpr_chain *chain; 1197 int i, rsize, nsegs; 1198 1199 rsize = sc->facts->IOCRequestFrameSize * sc->num_reqs * 4; 1200 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1201 16, 0, /* algnmnt, boundary */ 1202 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1203 BUS_SPACE_MAXADDR, /* highaddr */ 1204 NULL, NULL, /* filter, filterarg */ 1205 rsize, /* maxsize */ 1206 1, /* nsegments */ 1207 rsize, /* maxsegsize */ 1208 0, /* flags */ 1209 NULL, NULL, /* lockfunc, lockarg */ 1210 &sc->req_dmat)) { 1211 device_printf(sc->mpr_dev, "Cannot allocate request DMA tag\n"); 1212 return (ENOMEM); 1213 } 1214 if (bus_dmamem_alloc(sc->req_dmat, (void **)&sc->req_frames, 1215 BUS_DMA_NOWAIT, &sc->req_map)) { 1216 device_printf(sc->mpr_dev, "Cannot allocate request memory\n"); 1217 return (ENOMEM); 1218 } 1219 bzero(sc->req_frames, rsize); 1220 bus_dmamap_load(sc->req_dmat, sc->req_map, sc->req_frames, rsize, 1221 mpr_memaddr_cb, &sc->req_busaddr, 0); 1222 1223 /* 1224 * Gen3 and beyond uses the IOCMaxChainSegmentSize from IOC Facts to 1225 * get the size of a Chain Frame. Previous versions use the size as a 1226 * Request Frame for the Chain Frame size. If IOCMaxChainSegmentSize 1227 * is 0, use the default value. The IOCMaxChainSegmentSize is the 1228 * number of 16-byte elelements that can fit in a Chain Frame, which is 1229 * the size of an IEEE Simple SGE. 1230 */ 1231 if (sc->facts->MsgVersion >= MPI2_VERSION_02_05) { 1232 sc->chain_seg_size = 1233 htole16(sc->facts->IOCMaxChainSegmentSize); 1234 if (sc->chain_seg_size == 0) { 1235 sc->chain_frame_size = MPR_DEFAULT_CHAIN_SEG_SIZE * 1236 MPR_MAX_CHAIN_ELEMENT_SIZE; 1237 } else { 1238 sc->chain_frame_size = sc->chain_seg_size * 1239 MPR_MAX_CHAIN_ELEMENT_SIZE; 1240 } 1241 } else { 1242 sc->chain_frame_size = sc->facts->IOCRequestFrameSize * 4; 1243 } 1244 rsize = sc->chain_frame_size * sc->max_chains; 1245 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1246 16, 0, /* algnmnt, boundary */ 1247 BUS_SPACE_MAXADDR, /* lowaddr */ 1248 BUS_SPACE_MAXADDR, /* highaddr */ 1249 NULL, NULL, /* filter, filterarg */ 1250 rsize, /* maxsize */ 1251 1, /* nsegments */ 1252 rsize, /* maxsegsize */ 1253 0, /* flags */ 1254 NULL, NULL, /* lockfunc, lockarg */ 1255 &sc->chain_dmat)) { 1256 device_printf(sc->mpr_dev, "Cannot allocate chain DMA tag\n"); 1257 return (ENOMEM); 1258 } 1259 if (bus_dmamem_alloc(sc->chain_dmat, (void **)&sc->chain_frames, 1260 BUS_DMA_NOWAIT, &sc->chain_map)) { 1261 device_printf(sc->mpr_dev, "Cannot allocate chain memory\n"); 1262 return (ENOMEM); 1263 } 1264 bzero(sc->chain_frames, rsize); 1265 bus_dmamap_load(sc->chain_dmat, sc->chain_map, sc->chain_frames, rsize, 1266 mpr_memaddr_cb, &sc->chain_busaddr, 0); 1267 1268 rsize = MPR_SENSE_LEN * sc->num_reqs; 1269 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1270 1, 0, /* algnmnt, boundary */ 1271 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1272 BUS_SPACE_MAXADDR, /* highaddr */ 1273 NULL, NULL, /* filter, filterarg */ 1274 rsize, /* maxsize */ 1275 1, /* nsegments */ 1276 rsize, /* maxsegsize */ 1277 0, /* flags */ 1278 NULL, NULL, /* lockfunc, lockarg */ 1279 &sc->sense_dmat)) { 1280 device_printf(sc->mpr_dev, "Cannot allocate sense DMA tag\n"); 1281 return (ENOMEM); 1282 } 1283 if (bus_dmamem_alloc(sc->sense_dmat, (void **)&sc->sense_frames, 1284 BUS_DMA_NOWAIT, &sc->sense_map)) { 1285 device_printf(sc->mpr_dev, "Cannot allocate sense memory\n"); 1286 return (ENOMEM); 1287 } 1288 bzero(sc->sense_frames, rsize); 1289 bus_dmamap_load(sc->sense_dmat, sc->sense_map, sc->sense_frames, rsize, 1290 mpr_memaddr_cb, &sc->sense_busaddr, 0); 1291 1292 sc->chains = malloc(sizeof(struct mpr_chain) * sc->max_chains, M_MPR, 1293 M_WAITOK | M_ZERO); 1294 if (!sc->chains) { 1295 device_printf(sc->mpr_dev, "Cannot allocate memory %s %d\n", 1296 __func__, __LINE__); 1297 return (ENOMEM); 1298 } 1299 for (i = 0; i < sc->max_chains; i++) { 1300 chain = &sc->chains[i]; 1301 chain->chain = (MPI2_SGE_IO_UNION *)(sc->chain_frames + 1302 i * sc->chain_frame_size); 1303 chain->chain_busaddr = sc->chain_busaddr + 1304 i * sc->chain_frame_size; 1305 mpr_free_chain(sc, chain); 1306 sc->chain_free_lowwater++; 1307 } 1308 1309 /* 1310 * Allocate NVMe PRP Pages for NVMe SGL support only if the FW supports 1311 * these devices. 1312 */ 1313 if ((sc->facts->MsgVersion >= MPI2_VERSION_02_06) && 1314 (sc->facts->ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES)) { 1315 if (mpr_alloc_nvme_prp_pages(sc) == ENOMEM) 1316 return (ENOMEM); 1317 } 1318 1319 /* XXX Need to pick a more precise value */ 1320 nsegs = (MAXPHYS / PAGE_SIZE) + 1; 1321 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1322 1, 0, /* algnmnt, boundary */ 1323 BUS_SPACE_MAXADDR, /* lowaddr */ 1324 BUS_SPACE_MAXADDR, /* highaddr */ 1325 NULL, NULL, /* filter, filterarg */ 1326 BUS_SPACE_MAXSIZE_32BIT,/* maxsize */ 1327 nsegs, /* nsegments */ 1328 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 1329 BUS_DMA_ALLOCNOW, /* flags */ 1330 busdma_lock_mutex, /* lockfunc */ 1331 &sc->mpr_mtx, /* lockarg */ 1332 &sc->buffer_dmat)) { 1333 device_printf(sc->mpr_dev, "Cannot allocate buffer DMA tag\n"); 1334 return (ENOMEM); 1335 } 1336 1337 /* 1338 * SMID 0 cannot be used as a free command per the firmware spec. 1339 * Just drop that command instead of risking accounting bugs. 1340 */ 1341 sc->commands = malloc(sizeof(struct mpr_command) * sc->num_reqs, 1342 M_MPR, M_WAITOK | M_ZERO); 1343 if (!sc->commands) { 1344 device_printf(sc->mpr_dev, "Cannot allocate memory %s %d\n", 1345 __func__, __LINE__); 1346 return (ENOMEM); 1347 } 1348 for (i = 1; i < sc->num_reqs; i++) { 1349 cm = &sc->commands[i]; 1350 cm->cm_req = sc->req_frames + 1351 i * sc->facts->IOCRequestFrameSize * 4; 1352 cm->cm_req_busaddr = sc->req_busaddr + 1353 i * sc->facts->IOCRequestFrameSize * 4; 1354 cm->cm_sense = &sc->sense_frames[i]; 1355 cm->cm_sense_busaddr = sc->sense_busaddr + i * MPR_SENSE_LEN; 1356 cm->cm_desc.Default.SMID = i; 1357 cm->cm_sc = sc; 1358 TAILQ_INIT(&cm->cm_chain_list); 1359 TAILQ_INIT(&cm->cm_prp_page_list); 1360 callout_init_mtx(&cm->cm_callout, &sc->mpr_mtx, 0); 1361 1362 /* XXX Is a failure here a critical problem? */ 1363 if (bus_dmamap_create(sc->buffer_dmat, 0, &cm->cm_dmamap) 1364 == 0) { 1365 if (i <= sc->facts->HighPriorityCredit) 1366 mpr_free_high_priority_command(sc, cm); 1367 else 1368 mpr_free_command(sc, cm); 1369 } else { 1370 panic("failed to allocate command %d\n", i); 1371 sc->num_reqs = i; 1372 break; 1373 } 1374 } 1375 1376 return (0); 1377} 1378 1379/* 1380 * Allocate contiguous buffers for PCIe NVMe devices for building native PRPs, 1381 * which are scatter/gather lists for NVMe devices. 1382 * 1383 * This buffer must be contiguous due to the nature of how NVMe PRPs are built 1384 * and translated by FW. 1385 * 1386 * returns ENOMEM if memory could not be allocated, otherwise returns 0. 1387 */ 1388static int 1389mpr_alloc_nvme_prp_pages(struct mpr_softc *sc) 1390{ 1391 int PRPs_per_page, PRPs_required, pages_required; 1392 int rsize, i; 1393 struct mpr_prp_page *prp_page; 1394 1395 /* 1396 * Assuming a MAX_IO_SIZE of 1MB and a PAGE_SIZE of 4k, the max number 1397 * of PRPs (NVMe's Scatter/Gather Element) needed per I/O is: 1398 * MAX_IO_SIZE / PAGE_SIZE = 256 1399 * 1400 * 1 PRP entry in main frame for PRP list pointer still leaves 255 PRPs 1401 * required for the remainder of the 1MB I/O. 512 PRPs can fit into one 1402 * page (4096 / 8 = 512), so only one page is required for each I/O. 1403 * 1404 * Each of these buffers will need to be contiguous. For simplicity, 1405 * only one buffer is allocated here, which has all of the space 1406 * required for the NVMe Queue Depth. If there are problems allocating 1407 * this one buffer, this function will need to change to allocate 1408 * individual, contiguous NVME_QDEPTH buffers. 1409 * 1410 * The real calculation will use the real max io size. Above is just an 1411 * example. 1412 * 1413 */ 1414 PRPs_required = sc->maxio / PAGE_SIZE; 1415 PRPs_per_page = (PAGE_SIZE / PRP_ENTRY_SIZE) - 1; 1416 pages_required = (PRPs_required / PRPs_per_page) + 1; 1417 1418 sc->prp_buffer_size = PAGE_SIZE * pages_required; 1419 rsize = sc->prp_buffer_size * NVME_QDEPTH; 1420 if (bus_dma_tag_create( sc->mpr_parent_dmat, /* parent */ 1421 4, 0, /* algnmnt, boundary */ 1422 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1423 BUS_SPACE_MAXADDR, /* highaddr */ 1424 NULL, NULL, /* filter, filterarg */ 1425 rsize, /* maxsize */ 1426 1, /* nsegments */ 1427 rsize, /* maxsegsize */ 1428 0, /* flags */ 1429 NULL, NULL, /* lockfunc, lockarg */ 1430 &sc->prp_page_dmat)) { 1431 device_printf(sc->mpr_dev, "Cannot allocate NVMe PRP DMA " 1432 "tag\n"); 1433 return (ENOMEM); 1434 } 1435 if (bus_dmamem_alloc(sc->prp_page_dmat, (void **)&sc->prp_pages, 1436 BUS_DMA_NOWAIT, &sc->prp_page_map)) { 1437 device_printf(sc->mpr_dev, "Cannot allocate NVMe PRP memory\n"); 1438 return (ENOMEM); 1439 } 1440 bzero(sc->prp_pages, rsize); 1441 bus_dmamap_load(sc->prp_page_dmat, sc->prp_page_map, sc->prp_pages, 1442 rsize, mpr_memaddr_cb, &sc->prp_page_busaddr, 0); 1443 1444 sc->prps = malloc(sizeof(struct mpr_prp_page) * NVME_QDEPTH, M_MPR, 1445 M_WAITOK | M_ZERO); 1446 for (i = 0; i < NVME_QDEPTH; i++) { 1447 prp_page = &sc->prps[i]; 1448 prp_page->prp_page = (uint64_t *)(sc->prp_pages + 1449 i * sc->prp_buffer_size); 1450 prp_page->prp_page_busaddr = (uint64_t)(sc->prp_page_busaddr + 1451 i * sc->prp_buffer_size); 1452 mpr_free_prp_page(sc, prp_page); 1453 sc->prp_pages_free_lowwater++; 1454 } 1455 1456 return (0); 1457} 1458 1459static int 1460mpr_init_queues(struct mpr_softc *sc) 1461{ 1462 int i; 1463 1464 memset((uint8_t *)sc->post_queue, 0xff, sc->pqdepth * 8); 1465 1466 /* 1467 * According to the spec, we need to use one less reply than we 1468 * have space for on the queue. So sc->num_replies (the number we 1469 * use) should be less than sc->fqdepth (allocated size). 1470 */ 1471 if (sc->num_replies >= sc->fqdepth) 1472 return (EINVAL); 1473 1474 /* 1475 * Initialize all of the free queue entries. 1476 */ 1477 for (i = 0; i < sc->fqdepth; i++) { 1478 sc->free_queue[i] = sc->reply_busaddr + 1479 (i * sc->facts->ReplyFrameSize * 4); 1480 } 1481 sc->replyfreeindex = sc->num_replies; 1482 1483 return (0); 1484} 1485 1486/* Get the driver parameter tunables. Lowest priority are the driver defaults. 1487 * Next are the global settings, if they exist. Highest are the per-unit 1488 * settings, if they exist. 1489 */ 1490void 1491mpr_get_tunables(struct mpr_softc *sc) 1492{ 1493 char tmpstr[80]; 1494 1495 /* XXX default to some debugging for now */ 1496 sc->mpr_debug = MPR_INFO | MPR_FAULT; 1497 sc->disable_msix = 0; 1498 sc->disable_msi = 0; 1499 sc->max_chains = MPR_CHAIN_FRAMES; 1500 sc->max_io_pages = MPR_MAXIO_PAGES; 1501 sc->enable_ssu = MPR_SSU_ENABLE_SSD_DISABLE_HDD; 1502 sc->spinup_wait_time = DEFAULT_SPINUP_WAIT; 1503 sc->use_phynum = 1; 1504 1505 /* 1506 * Grab the global variables. 1507 */ 1508 TUNABLE_INT_FETCH("hw.mpr.debug_level", &sc->mpr_debug); 1509 TUNABLE_INT_FETCH("hw.mpr.disable_msix", &sc->disable_msix); 1510 TUNABLE_INT_FETCH("hw.mpr.disable_msi", &sc->disable_msi); 1511 TUNABLE_INT_FETCH("hw.mpr.max_chains", &sc->max_chains); 1512 TUNABLE_INT_FETCH("hw.mpr.max_io_pages", &sc->max_io_pages); 1513 TUNABLE_INT_FETCH("hw.mpr.enable_ssu", &sc->enable_ssu); 1514 TUNABLE_INT_FETCH("hw.mpr.spinup_wait_time", &sc->spinup_wait_time); 1515 TUNABLE_INT_FETCH("hw.mpr.use_phy_num", &sc->use_phynum); 1516 1517 /* Grab the unit-instance variables */ 1518 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.debug_level", 1519 device_get_unit(sc->mpr_dev)); 1520 TUNABLE_INT_FETCH(tmpstr, &sc->mpr_debug); 1521 1522 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.disable_msix", 1523 device_get_unit(sc->mpr_dev)); 1524 TUNABLE_INT_FETCH(tmpstr, &sc->disable_msix); 1525 1526 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.disable_msi", 1527 device_get_unit(sc->mpr_dev)); 1528 TUNABLE_INT_FETCH(tmpstr, &sc->disable_msi); 1529 1530 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_chains", 1531 device_get_unit(sc->mpr_dev)); 1532 TUNABLE_INT_FETCH(tmpstr, &sc->max_chains); 1533 1534 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_io_pages", 1535 device_get_unit(sc->mpr_dev)); 1536 TUNABLE_INT_FETCH(tmpstr, &sc->max_io_pages); 1537 1538 bzero(sc->exclude_ids, sizeof(sc->exclude_ids)); 1539 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.exclude_ids", 1540 device_get_unit(sc->mpr_dev)); 1541 TUNABLE_STR_FETCH(tmpstr, sc->exclude_ids, sizeof(sc->exclude_ids)); 1542 1543 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.enable_ssu", 1544 device_get_unit(sc->mpr_dev)); 1545 TUNABLE_INT_FETCH(tmpstr, &sc->enable_ssu); 1546 1547 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.spinup_wait_time", 1548 device_get_unit(sc->mpr_dev)); 1549 TUNABLE_INT_FETCH(tmpstr, &sc->spinup_wait_time); 1550 1551 snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.use_phy_num", 1552 device_get_unit(sc->mpr_dev)); 1553 TUNABLE_INT_FETCH(tmpstr, &sc->use_phynum); 1554} 1555 1556static void 1557mpr_setup_sysctl(struct mpr_softc *sc) 1558{ 1559 struct sysctl_ctx_list *sysctl_ctx = NULL; 1560 struct sysctl_oid *sysctl_tree = NULL; 1561 char tmpstr[80], tmpstr2[80]; 1562 1563 /* 1564 * Setup the sysctl variable so the user can change the debug level 1565 * on the fly. 1566 */ 1567 snprintf(tmpstr, sizeof(tmpstr), "MPR controller %d", 1568 device_get_unit(sc->mpr_dev)); 1569 snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mpr_dev)); 1570 1571 sysctl_ctx = device_get_sysctl_ctx(sc->mpr_dev); 1572 if (sysctl_ctx != NULL) 1573 sysctl_tree = device_get_sysctl_tree(sc->mpr_dev); 1574 1575 if (sysctl_tree == NULL) { 1576 sysctl_ctx_init(&sc->sysctl_ctx); 1577 sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, 1578 SYSCTL_STATIC_CHILDREN(_hw_mpr), OID_AUTO, tmpstr2, 1579 CTLFLAG_RD, 0, tmpstr); 1580 if (sc->sysctl_tree == NULL) 1581 return; 1582 sysctl_ctx = &sc->sysctl_ctx; 1583 sysctl_tree = sc->sysctl_tree; 1584 } 1585 1586 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1587 OID_AUTO, "debug_level", CTLFLAG_RW, &sc->mpr_debug, 0, 1588 "mpr debug level"); 1589 1590 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1591 OID_AUTO, "disable_msix", CTLFLAG_RD, &sc->disable_msix, 0, 1592 "Disable the use of MSI-X interrupts"); 1593 1594 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1595 OID_AUTO, "disable_msi", CTLFLAG_RD, &sc->disable_msi, 0, 1596 "Disable the use of MSI interrupts"); 1597 1598 SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1599 OID_AUTO, "firmware_version", CTLFLAG_RW, sc->fw_version, 1600 strlen(sc->fw_version), "firmware version"); 1601 1602 SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1603 OID_AUTO, "driver_version", CTLFLAG_RW, MPR_DRIVER_VERSION, 1604 strlen(MPR_DRIVER_VERSION), "driver version"); 1605 1606 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1607 OID_AUTO, "io_cmds_active", CTLFLAG_RD, 1608 &sc->io_cmds_active, 0, "number of currently active commands"); 1609 1610 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1611 OID_AUTO, "io_cmds_highwater", CTLFLAG_RD, 1612 &sc->io_cmds_highwater, 0, "maximum active commands seen"); 1613 1614 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1615 OID_AUTO, "chain_free", CTLFLAG_RD, 1616 &sc->chain_free, 0, "number of free chain elements"); 1617 1618 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1619 OID_AUTO, "chain_free_lowwater", CTLFLAG_RD, 1620 &sc->chain_free_lowwater, 0,"lowest number of free chain elements"); 1621 1622 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1623 OID_AUTO, "max_chains", CTLFLAG_RD, 1624 &sc->max_chains, 0,"maximum chain frames that will be allocated"); 1625 1626 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1627 OID_AUTO, "max_io_pages", CTLFLAG_RD, 1628 &sc->max_io_pages, 0,"maximum pages to allow per I/O (if <1 use " 1629 "IOCFacts)"); 1630 1631 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1632 OID_AUTO, "enable_ssu", CTLFLAG_RW, &sc->enable_ssu, 0, 1633 "enable SSU to SATA SSD/HDD at shutdown"); 1634 1635 SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1636 OID_AUTO, "chain_alloc_fail", CTLFLAG_RD, 1637 &sc->chain_alloc_fail, "chain allocation failures"); 1638 1639 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1640 OID_AUTO, "spinup_wait_time", CTLFLAG_RD, 1641 &sc->spinup_wait_time, DEFAULT_SPINUP_WAIT, "seconds to wait for " 1642 "spinup after SATA ID error"); 1643 1644 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1645 OID_AUTO, "use_phy_num", CTLFLAG_RD, &sc->use_phynum, 0, 1646 "Use the phy number for enumeration"); 1647 1648 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1649 OID_AUTO, "prp_pages_free", CTLFLAG_RD, 1650 &sc->prp_pages_free, 0, "number of free PRP pages"); 1651 1652 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1653 OID_AUTO, "prp_pages_free_lowwater", CTLFLAG_RD, 1654 &sc->prp_pages_free_lowwater, 0,"lowest number of free PRP pages"); 1655 1656 SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1657 OID_AUTO, "prp_page_alloc_fail", CTLFLAG_RD, 1658 &sc->prp_page_alloc_fail, "PRP page allocation failures"); 1659} 1660 1661int 1662mpr_attach(struct mpr_softc *sc) 1663{ 1664 int error; 1665 1666 MPR_FUNCTRACE(sc); 1667 1668 mtx_init(&sc->mpr_mtx, "MPR lock", NULL, MTX_DEF); 1669 callout_init_mtx(&sc->periodic, &sc->mpr_mtx, 0); 1670 callout_init_mtx(&sc->device_check_callout, &sc->mpr_mtx, 0); 1671 TAILQ_INIT(&sc->event_list); 1672 timevalclear(&sc->lastfail); 1673 1674 if ((error = mpr_transition_ready(sc)) != 0) { 1675 mpr_printf(sc, "%s failed to transition ready\n", __func__); 1676 return (error); 1677 } 1678 1679 sc->facts = malloc(sizeof(MPI2_IOC_FACTS_REPLY), M_MPR, 1680 M_ZERO|M_NOWAIT); 1681 if (!sc->facts) { 1682 device_printf(sc->mpr_dev, "Cannot allocate memory %s %d\n", 1683 __func__, __LINE__); 1684 return (ENOMEM); 1685 } 1686 1687 /* 1688 * Get IOC Facts and allocate all structures based on this information. 1689 * A Diag Reset will also call mpr_iocfacts_allocate and re-read the IOC 1690 * Facts. If relevant values have changed in IOC Facts, this function 1691 * will free all of the memory based on IOC Facts and reallocate that 1692 * memory. If this fails, any allocated memory should already be freed. 1693 */ 1694 if ((error = mpr_iocfacts_allocate(sc, TRUE)) != 0) { 1695 mpr_dprint(sc, MPR_FAULT, "%s IOC Facts based allocation " 1696 "failed with error %d\n", __func__, error); 1697 return (error); 1698 } 1699 1700 /* Start the periodic watchdog check on the IOC Doorbell */ 1701 mpr_periodic(sc); 1702 1703 /* 1704 * The portenable will kick off discovery events that will drive the 1705 * rest of the initialization process. The CAM/SAS module will 1706 * hold up the boot sequence until discovery is complete. 1707 */ 1708 sc->mpr_ich.ich_func = mpr_startup; 1709 sc->mpr_ich.ich_arg = sc; 1710 if (config_intrhook_establish(&sc->mpr_ich) != 0) { 1711 mpr_dprint(sc, MPR_ERROR, "Cannot establish MPR config hook\n"); 1712 error = EINVAL; 1713 } 1714 1715 /* 1716 * Allow IR to shutdown gracefully when shutdown occurs. 1717 */ 1718 sc->shutdown_eh = EVENTHANDLER_REGISTER(shutdown_final, 1719 mprsas_ir_shutdown, sc, SHUTDOWN_PRI_DEFAULT); 1720 1721 if (sc->shutdown_eh == NULL) 1722 mpr_dprint(sc, MPR_ERROR, "shutdown event registration " 1723 "failed\n"); 1724 1725 mpr_setup_sysctl(sc); 1726 1727 sc->mpr_flags |= MPR_FLAGS_ATTACH_DONE; 1728 1729 return (error); 1730} 1731 1732/* Run through any late-start handlers. */ 1733static void 1734mpr_startup(void *arg) 1735{ 1736 struct mpr_softc *sc; 1737 1738 sc = (struct mpr_softc *)arg; 1739 1740 mpr_lock(sc); 1741 mpr_unmask_intr(sc); 1742 1743 /* initialize device mapping tables */ 1744 mpr_base_static_config_pages(sc); 1745 mpr_mapping_initialize(sc); 1746 mprsas_startup(sc); 1747 mpr_unlock(sc); 1748} 1749 1750/* Periodic watchdog. Is called with the driver lock already held. */ 1751static void 1752mpr_periodic(void *arg) 1753{ 1754 struct mpr_softc *sc; 1755 uint32_t db; 1756 1757 sc = (struct mpr_softc *)arg; 1758 if (sc->mpr_flags & MPR_FLAGS_SHUTDOWN) 1759 return; 1760 1761 db = mpr_regread(sc, MPI2_DOORBELL_OFFSET); 1762 if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { 1763 if ((db & MPI2_DOORBELL_FAULT_CODE_MASK) == 1764 IFAULT_IOP_OVER_TEMP_THRESHOLD_EXCEEDED) { 1765 panic("TEMPERATURE FAULT: STOPPING."); 1766 } 1767 mpr_dprint(sc, MPR_FAULT, "IOC Fault 0x%08x, Resetting\n", db); 1768 mpr_reinit(sc); 1769 } 1770 1771 callout_reset(&sc->periodic, MPR_PERIODIC_DELAY * hz, mpr_periodic, sc); 1772} 1773 1774static void 1775mpr_log_evt_handler(struct mpr_softc *sc, uintptr_t data, 1776 MPI2_EVENT_NOTIFICATION_REPLY *event) 1777{ 1778 MPI2_EVENT_DATA_LOG_ENTRY_ADDED *entry; 1779 1780 MPR_DPRINT_EVENT(sc, generic, event); 1781 1782 switch (event->Event) { 1783 case MPI2_EVENT_LOG_DATA: 1784 mpr_dprint(sc, MPR_EVENT, "MPI2_EVENT_LOG_DATA:\n"); 1785 if (sc->mpr_debug & MPR_EVENT) 1786 hexdump(event->EventData, event->EventDataLength, NULL, 1787 0); 1788 break; 1789 case MPI2_EVENT_LOG_ENTRY_ADDED: 1790 entry = (MPI2_EVENT_DATA_LOG_ENTRY_ADDED *)event->EventData; 1791 mpr_dprint(sc, MPR_EVENT, "MPI2_EVENT_LOG_ENTRY_ADDED event " 1792 "0x%x Sequence %d:\n", entry->LogEntryQualifier, 1793 entry->LogSequence); 1794 break; 1795 default: 1796 break; 1797 } 1798 return; 1799} 1800 1801static int 1802mpr_attach_log(struct mpr_softc *sc) 1803{ 1804 uint8_t events[16]; 1805 1806 bzero(events, 16); 1807 setbit(events, MPI2_EVENT_LOG_DATA); 1808 setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED); 1809 1810 mpr_register_events(sc, events, mpr_log_evt_handler, NULL, 1811 &sc->mpr_log_eh); 1812 1813 return (0); 1814} 1815 1816static int 1817mpr_detach_log(struct mpr_softc *sc) 1818{ 1819 1820 if (sc->mpr_log_eh != NULL) 1821 mpr_deregister_events(sc, sc->mpr_log_eh); 1822 return (0); 1823} 1824 1825/* 1826 * Free all of the driver resources and detach submodules. Should be called 1827 * without the lock held. 1828 */ 1829int 1830mpr_free(struct mpr_softc *sc) 1831{ 1832 int error; 1833 1834 /* Turn off the watchdog */ 1835 mpr_lock(sc); 1836 sc->mpr_flags |= MPR_FLAGS_SHUTDOWN; 1837 mpr_unlock(sc); 1838 /* Lock must not be held for this */ 1839 callout_drain(&sc->periodic); 1840 callout_drain(&sc->device_check_callout); 1841 1842 if (((error = mpr_detach_log(sc)) != 0) || 1843 ((error = mpr_detach_sas(sc)) != 0)) 1844 return (error); 1845 1846 mpr_detach_user(sc); 1847 1848 /* Put the IOC back in the READY state. */ 1849 mpr_lock(sc); 1850 if ((error = mpr_transition_ready(sc)) != 0) { 1851 mpr_unlock(sc); 1852 return (error); 1853 } 1854 mpr_unlock(sc); 1855 1856 if (sc->facts != NULL) 1857 free(sc->facts, M_MPR); 1858 1859 /* 1860 * Free all buffers that are based on IOC Facts. A Diag Reset may need 1861 * to free these buffers too. 1862 */ 1863 mpr_iocfacts_free(sc); 1864 1865 if (sc->sysctl_tree != NULL) 1866 sysctl_ctx_free(&sc->sysctl_ctx); 1867 1868 /* Deregister the shutdown function */ 1869 if (sc->shutdown_eh != NULL) 1870 EVENTHANDLER_DEREGISTER(shutdown_final, sc->shutdown_eh); 1871 1872 mtx_destroy(&sc->mpr_mtx); 1873 1874 return (0); 1875} 1876 1877static __inline void 1878mpr_complete_command(struct mpr_softc *sc, struct mpr_command *cm) 1879{ 1880 MPR_FUNCTRACE(sc); 1881 1882 if (cm == NULL) { 1883 mpr_dprint(sc, MPR_ERROR, "Completing NULL command\n"); 1884 return; 1885 } 1886 1887 if (cm->cm_flags & MPR_CM_FLAGS_POLLED) 1888 cm->cm_flags |= MPR_CM_FLAGS_COMPLETE; 1889 1890 if (cm->cm_complete != NULL) { 1891 mpr_dprint(sc, MPR_TRACE, 1892 "%s cm %p calling cm_complete %p data %p reply %p\n", 1893 __func__, cm, cm->cm_complete, cm->cm_complete_data, 1894 cm->cm_reply); 1895 cm->cm_complete(sc, cm); 1896 } 1897 1898 if (cm->cm_flags & MPR_CM_FLAGS_WAKEUP) { 1899 mpr_dprint(sc, MPR_TRACE, "waking up %p\n", cm); 1900 wakeup(cm); 1901 } 1902 1903 if (sc->io_cmds_active != 0) { 1904 sc->io_cmds_active--; 1905 } else { 1906 mpr_dprint(sc, MPR_ERROR, "Warning: io_cmds_active is " 1907 "out of sync - resynching to 0\n"); 1908 } 1909} 1910 1911static void 1912mpr_sas_log_info(struct mpr_softc *sc , u32 log_info) 1913{ 1914 union loginfo_type { 1915 u32 loginfo; 1916 struct { 1917 u32 subcode:16; 1918 u32 code:8; 1919 u32 originator:4; 1920 u32 bus_type:4; 1921 } dw; 1922 }; 1923 union loginfo_type sas_loginfo; 1924 char *originator_str = NULL; 1925 1926 sas_loginfo.loginfo = log_info; 1927 if (sas_loginfo.dw.bus_type != 3 /*SAS*/) 1928 return; 1929 1930 /* each nexus loss loginfo */ 1931 if (log_info == 0x31170000) 1932 return; 1933 1934 /* eat the loginfos associated with task aborts */ 1935 if ((log_info == 30050000) || (log_info == 0x31140000) || 1936 (log_info == 0x31130000)) 1937 return; 1938 1939 switch (sas_loginfo.dw.originator) { 1940 case 0: 1941 originator_str = "IOP"; 1942 break; 1943 case 1: 1944 originator_str = "PL"; 1945 break; 1946 case 2: 1947 originator_str = "IR"; 1948 break; 1949 } 1950 1951 mpr_dprint(sc, MPR_LOG, "log_info(0x%08x): originator(%s), " 1952 "code(0x%02x), sub_code(0x%04x)\n", log_info, originator_str, 1953 sas_loginfo.dw.code, sas_loginfo.dw.subcode); 1954} 1955 1956static void 1957mpr_display_reply_info(struct mpr_softc *sc, uint8_t *reply) 1958{ 1959 MPI2DefaultReply_t *mpi_reply; 1960 u16 sc_status; 1961 1962 mpi_reply = (MPI2DefaultReply_t*)reply; 1963 sc_status = le16toh(mpi_reply->IOCStatus); 1964 if (sc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) 1965 mpr_sas_log_info(sc, le32toh(mpi_reply->IOCLogInfo)); 1966} 1967 1968void 1969mpr_intr(void *data) 1970{ 1971 struct mpr_softc *sc; 1972 uint32_t status; 1973 1974 sc = (struct mpr_softc *)data; 1975 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 1976 1977 /* 1978 * Check interrupt status register to flush the bus. This is 1979 * needed for both INTx interrupts and driver-driven polling 1980 */ 1981 status = mpr_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); 1982 if ((status & MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT) == 0) 1983 return; 1984 1985 mpr_lock(sc); 1986 mpr_intr_locked(data); 1987 mpr_unlock(sc); 1988 return; 1989} 1990 1991/* 1992 * In theory, MSI/MSIX interrupts shouldn't need to read any registers on the 1993 * chip. Hopefully this theory is correct. 1994 */ 1995void 1996mpr_intr_msi(void *data) 1997{ 1998 struct mpr_softc *sc; 1999 2000 sc = (struct mpr_softc *)data; 2001 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 2002 mpr_lock(sc); 2003 mpr_intr_locked(data); 2004 mpr_unlock(sc); 2005 return; 2006} 2007 2008/* 2009 * The locking is overly broad and simplistic, but easy to deal with for now. 2010 */ 2011void 2012mpr_intr_locked(void *data) 2013{ 2014 MPI2_REPLY_DESCRIPTORS_UNION *desc; 2015 struct mpr_softc *sc; 2016 struct mpr_command *cm = NULL; 2017 uint8_t flags; 2018 u_int pq; 2019 MPI2_DIAG_RELEASE_REPLY *rel_rep; 2020 mpr_fw_diagnostic_buffer_t *pBuffer; 2021 2022 sc = (struct mpr_softc *)data; 2023 2024 pq = sc->replypostindex; 2025 mpr_dprint(sc, MPR_TRACE, 2026 "%s sc %p starting with replypostindex %u\n", 2027 __func__, sc, sc->replypostindex); 2028 2029 for ( ;; ) { 2030 cm = NULL; 2031 desc = &sc->post_queue[sc->replypostindex]; 2032 flags = desc->Default.ReplyFlags & 2033 MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; 2034 if ((flags == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) || 2035 (le32toh(desc->Words.High) == 0xffffffff)) 2036 break; 2037 2038 /* increment the replypostindex now, so that event handlers 2039 * and cm completion handlers which decide to do a diag 2040 * reset can zero it without it getting incremented again 2041 * afterwards, and we break out of this loop on the next 2042 * iteration since the reply post queue has been cleared to 2043 * 0xFF and all descriptors look unused (which they are). 2044 */ 2045 if (++sc->replypostindex >= sc->pqdepth) 2046 sc->replypostindex = 0; 2047 2048 switch (flags) { 2049 case MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS: 2050 case MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS: 2051 case MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS: 2052 cm = &sc->commands[le16toh(desc->SCSIIOSuccess.SMID)]; 2053 cm->cm_reply = NULL; 2054 break; 2055 case MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY: 2056 { 2057 uint32_t baddr; 2058 uint8_t *reply; 2059 2060 /* 2061 * Re-compose the reply address from the address 2062 * sent back from the chip. The ReplyFrameAddress 2063 * is the lower 32 bits of the physical address of 2064 * particular reply frame. Convert that address to 2065 * host format, and then use that to provide the 2066 * offset against the virtual address base 2067 * (sc->reply_frames). 2068 */ 2069 baddr = le32toh(desc->AddressReply.ReplyFrameAddress); 2070 reply = sc->reply_frames + 2071 (baddr - ((uint32_t)sc->reply_busaddr)); 2072 /* 2073 * Make sure the reply we got back is in a valid 2074 * range. If not, go ahead and panic here, since 2075 * we'll probably panic as soon as we deference the 2076 * reply pointer anyway. 2077 */ 2078 if ((reply < sc->reply_frames) 2079 || (reply > (sc->reply_frames + 2080 (sc->fqdepth * sc->facts->ReplyFrameSize * 4)))) { 2081 printf("%s: WARNING: reply %p out of range!\n", 2082 __func__, reply); 2083 printf("%s: reply_frames %p, fqdepth %d, " 2084 "frame size %d\n", __func__, 2085 sc->reply_frames, sc->fqdepth, 2086 sc->facts->ReplyFrameSize * 4); 2087 printf("%s: baddr %#x,\n", __func__, baddr); 2088 /* LSI-TODO. See Linux Code for Graceful exit */ 2089 panic("Reply address out of range"); 2090 } 2091 if (le16toh(desc->AddressReply.SMID) == 0) { 2092 if (((MPI2_DEFAULT_REPLY *)reply)->Function == 2093 MPI2_FUNCTION_DIAG_BUFFER_POST) { 2094 /* 2095 * If SMID is 0 for Diag Buffer Post, 2096 * this implies that the reply is due to 2097 * a release function with a status that 2098 * the buffer has been released. Set 2099 * the buffer flags accordingly. 2100 */ 2101 rel_rep = 2102 (MPI2_DIAG_RELEASE_REPLY *)reply; 2103 if ((le16toh(rel_rep->IOCStatus) & 2104 MPI2_IOCSTATUS_MASK) == 2105 MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED) 2106 { 2107 pBuffer = 2108 &sc->fw_diag_buffer_list[ 2109 rel_rep->BufferType]; 2110 pBuffer->valid_data = TRUE; 2111 pBuffer->owned_by_firmware = 2112 FALSE; 2113 pBuffer->immediate = FALSE; 2114 } 2115 } else 2116 mpr_dispatch_event(sc, baddr, 2117 (MPI2_EVENT_NOTIFICATION_REPLY *) 2118 reply); 2119 } else { 2120 cm = &sc->commands[ 2121 le16toh(desc->AddressReply.SMID)]; 2122 cm->cm_reply = reply; 2123 cm->cm_reply_data = 2124 le32toh(desc->AddressReply. 2125 ReplyFrameAddress); 2126 } 2127 break; 2128 } 2129 case MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS: 2130 case MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER: 2131 case MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS: 2132 default: 2133 /* Unhandled */ 2134 mpr_dprint(sc, MPR_ERROR, "Unhandled reply 0x%x\n", 2135 desc->Default.ReplyFlags); 2136 cm = NULL; 2137 break; 2138 } 2139 2140 if (cm != NULL) { 2141 // Print Error reply frame 2142 if (cm->cm_reply) 2143 mpr_display_reply_info(sc,cm->cm_reply); 2144 mpr_complete_command(sc, cm); 2145 } 2146 2147 desc->Words.Low = 0xffffffff; 2148 desc->Words.High = 0xffffffff; 2149 } 2150 2151 if (pq != sc->replypostindex) { 2152 mpr_dprint(sc, MPR_TRACE, 2153 "%s sc %p writing postindex %d\n", 2154 __func__, sc, sc->replypostindex); 2155 mpr_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 2156 sc->replypostindex); 2157 } 2158 2159 return; 2160} 2161 2162static void 2163mpr_dispatch_event(struct mpr_softc *sc, uintptr_t data, 2164 MPI2_EVENT_NOTIFICATION_REPLY *reply) 2165{ 2166 struct mpr_event_handle *eh; 2167 int event, handled = 0; 2168 2169 event = le16toh(reply->Event); 2170 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 2171 if (isset(eh->mask, event)) { 2172 eh->callback(sc, data, reply); 2173 handled++; 2174 } 2175 } 2176 2177 if (handled == 0) 2178 mpr_dprint(sc, MPR_EVENT, "Unhandled event 0x%x\n", 2179 le16toh(event)); 2180 2181 /* 2182 * This is the only place that the event/reply should be freed. 2183 * Anything wanting to hold onto the event data should have 2184 * already copied it into their own storage. 2185 */ 2186 mpr_free_reply(sc, data); 2187} 2188 2189static void 2190mpr_reregister_events_complete(struct mpr_softc *sc, struct mpr_command *cm) 2191{ 2192 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 2193 2194 if (cm->cm_reply) 2195 MPR_DPRINT_EVENT(sc, generic, 2196 (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply); 2197 2198 mpr_free_command(sc, cm); 2199 2200 /* next, send a port enable */ 2201 mprsas_startup(sc); 2202} 2203 2204/* 2205 * For both register_events and update_events, the caller supplies a bitmap 2206 * of events that it _wants_. These functions then turn that into a bitmask 2207 * suitable for the controller. 2208 */ 2209int 2210mpr_register_events(struct mpr_softc *sc, uint8_t *mask, 2211 mpr_evt_callback_t *cb, void *data, struct mpr_event_handle **handle) 2212{ 2213 struct mpr_event_handle *eh; 2214 int error = 0; 2215 2216 eh = malloc(sizeof(struct mpr_event_handle), M_MPR, M_WAITOK|M_ZERO); 2217 if (!eh) { 2218 device_printf(sc->mpr_dev, "Cannot allocate memory %s %d\n", 2219 __func__, __LINE__); 2220 return (ENOMEM); 2221 } 2222 eh->callback = cb; 2223 eh->data = data; 2224 TAILQ_INSERT_TAIL(&sc->event_list, eh, eh_list); 2225 if (mask != NULL) 2226 error = mpr_update_events(sc, eh, mask); 2227 *handle = eh; 2228 2229 return (error); 2230} 2231 2232int 2233mpr_update_events(struct mpr_softc *sc, struct mpr_event_handle *handle, 2234 uint8_t *mask) 2235{ 2236 MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; 2237 MPI2_EVENT_NOTIFICATION_REPLY *reply = NULL; 2238 struct mpr_command *cm = NULL; 2239 struct mpr_event_handle *eh; 2240 int error, i; 2241 2242 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 2243 2244 if ((mask != NULL) && (handle != NULL)) 2245 bcopy(mask, &handle->mask[0], 16); 2246 memset(sc->event_mask, 0xff, 16); 2247 2248 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 2249 for (i = 0; i < 16; i++) 2250 sc->event_mask[i] &= ~eh->mask[i]; 2251 } 2252 2253 if ((cm = mpr_alloc_command(sc)) == NULL) 2254 return (EBUSY); 2255 evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; 2256 evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; 2257 evtreq->MsgFlags = 0; 2258 evtreq->SASBroadcastPrimitiveMasks = 0; 2259#ifdef MPR_DEBUG_ALL_EVENTS 2260 { 2261 u_char fullmask[16]; 2262 memset(fullmask, 0x00, 16); 2263 bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16); 2264 } 2265#else 2266 bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16); 2267#endif 2268 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 2269 cm->cm_data = NULL; 2270 2271 error = mpr_request_polled(sc, &cm); 2272 if (cm != NULL) 2273 reply = (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply; 2274 if ((reply == NULL) || 2275 (reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) 2276 error = ENXIO; 2277 2278 if (reply) 2279 MPR_DPRINT_EVENT(sc, generic, reply); 2280 2281 mpr_dprint(sc, MPR_TRACE, "%s finished error %d\n", __func__, error); 2282 2283 if (cm != NULL) 2284 mpr_free_command(sc, cm); 2285 return (error); 2286} 2287 2288static int 2289mpr_reregister_events(struct mpr_softc *sc) 2290{ 2291 MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; 2292 struct mpr_command *cm; 2293 struct mpr_event_handle *eh; 2294 int error, i; 2295 2296 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 2297 2298 /* first, reregister events */ 2299 2300 memset(sc->event_mask, 0xff, 16); 2301 2302 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 2303 for (i = 0; i < 16; i++) 2304 sc->event_mask[i] &= ~eh->mask[i]; 2305 } 2306 2307 if ((cm = mpr_alloc_command(sc)) == NULL) 2308 return (EBUSY); 2309 evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; 2310 evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; 2311 evtreq->MsgFlags = 0; 2312 evtreq->SASBroadcastPrimitiveMasks = 0; 2313#ifdef MPR_DEBUG_ALL_EVENTS 2314 { 2315 u_char fullmask[16]; 2316 memset(fullmask, 0x00, 16); 2317 bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16); 2318 } 2319#else 2320 bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16); 2321#endif 2322 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 2323 cm->cm_data = NULL; 2324 cm->cm_complete = mpr_reregister_events_complete; 2325 2326 error = mpr_map_command(sc, cm); 2327 2328 mpr_dprint(sc, MPR_TRACE, "%s finished with error %d\n", __func__, 2329 error); 2330 return (error); 2331} 2332 2333int 2334mpr_deregister_events(struct mpr_softc *sc, struct mpr_event_handle *handle) 2335{ 2336 2337 TAILQ_REMOVE(&sc->event_list, handle, eh_list); 2338 free(handle, M_MPR); 2339 return (mpr_update_events(sc, NULL, NULL)); 2340} 2341 2342/** 2343* mpr_build_nvme_prp - This function is called for NVMe end devices to build a 2344* native SGL (NVMe PRP). The native SGL is built starting in the first PRP entry 2345* of the NVMe message (PRP1). If the data buffer is small enough to be described 2346* entirely using PRP1, then PRP2 is not used. If needed, PRP2 is used to 2347* describe a larger data buffer. If the data buffer is too large to describe 2348* using the two PRP entriess inside the NVMe message, then PRP1 describes the 2349* first data memory segment, and PRP2 contains a pointer to a PRP list located 2350* elsewhere in memory to describe the remaining data memory segments. The PRP 2351* list will be contiguous. 2352 2353* The native SGL for NVMe devices is a Physical Region Page (PRP). A PRP 2354* consists of a list of PRP entries to describe a number of noncontigous 2355* physical memory segments as a single memory buffer, just as a SGL does. Note 2356* however, that this function is only used by the IOCTL call, so the memory 2357* given will be guaranteed to be contiguous. There is no need to translate 2358* non-contiguous SGL into a PRP in this case. All PRPs will describe contiguous 2359* space that is one page size each. 2360* 2361* Each NVMe message contains two PRP entries. The first (PRP1) either contains 2362* a PRP list pointer or a PRP element, depending upon the command. PRP2 contains 2363* the second PRP element if the memory being described fits within 2 PRP 2364* entries, or a PRP list pointer if the PRP spans more than two entries. 2365* 2366* A PRP list pointer contains the address of a PRP list, structured as a linear 2367* array of PRP entries. Each PRP entry in this list describes a segment of 2368* physical memory. 2369* 2370* Each 64-bit PRP entry comprises an address and an offset field. The address 2371* always points to the beginning of a PAGE_SIZE physical memory page, and the 2372* offset describes where within that page the memory segment begins. Only the 2373* first element in a PRP list may contain a non-zero offest, implying that all 2374* memory segments following the first begin at the start of a PAGE_SIZE page. 2375* 2376* Each PRP element normally describes a chunck of PAGE_SIZE physical memory, 2377* with exceptions for the first and last elements in the list. If the memory 2378* being described by the list begins at a non-zero offset within the first page, 2379* then the first PRP element will contain a non-zero offset indicating where the 2380* region begins within the page. The last memory segment may end before the end 2381* of the PAGE_SIZE segment, depending upon the overall size of the memory being 2382* described by the PRP list. 2383* 2384* Since PRP entries lack any indication of size, the overall data buffer length 2385* is used to determine where the end of the data memory buffer is located, and 2386* how many PRP entries are required to describe it. 2387* 2388* Returns nothing. 2389*/ 2390void 2391mpr_build_nvme_prp(struct mpr_softc *sc, struct mpr_command *cm, 2392 Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request, void *data, 2393 uint32_t data_in_sz, uint32_t data_out_sz) 2394{ 2395 int prp_size = PRP_ENTRY_SIZE; 2396 uint64_t *prp_entry, *prp1_entry, *prp2_entry; 2397 uint64_t *prp_entry_phys, *prp_page, *prp_page_phys; 2398 uint32_t offset, entry_len, page_mask_result, page_mask; 2399 bus_addr_t paddr; 2400 size_t length; 2401 struct mpr_prp_page *prp_page_info = NULL; 2402 2403 /* 2404 * Not all commands require a data transfer. If no data, just return 2405 * without constructing any PRP. 2406 */ 2407 if (!data_in_sz && !data_out_sz) 2408 return; 2409 2410 /* 2411 * Set pointers to PRP1 and PRP2, which are in the NVMe command. PRP1 is 2412 * located at a 24 byte offset from the start of the NVMe command. Then 2413 * set the current PRP entry pointer to PRP1. 2414 */ 2415 prp1_entry = (uint64_t *)(nvme_encap_request->NVMe_Command + 2416 NVME_CMD_PRP1_OFFSET); 2417 prp2_entry = (uint64_t *)(nvme_encap_request->NVMe_Command + 2418 NVME_CMD_PRP2_OFFSET); 2419 prp_entry = prp1_entry; 2420 2421 /* 2422 * For the PRP entries, use the specially allocated buffer of 2423 * contiguous memory. PRP Page allocation failures should not happen 2424 * because there should be enough PRP page buffers to account for the 2425 * possible NVMe QDepth. 2426 */ 2427 prp_page_info = mpr_alloc_prp_page(sc); 2428 KASSERT(prp_page_info != NULL, ("%s: There are no PRP Pages left to be " 2429 "used for building a native NVMe SGL.\n", __func__)); 2430 prp_page = (uint64_t *)prp_page_info->prp_page; 2431 prp_page_phys = (uint64_t *)(uintptr_t)prp_page_info->prp_page_busaddr; 2432 2433 /* 2434 * Insert the allocated PRP page into the command's PRP page list. This 2435 * will be freed when the command is freed. 2436 */ 2437 TAILQ_INSERT_TAIL(&cm->cm_prp_page_list, prp_page_info, prp_page_link); 2438 2439 /* 2440 * Check if we are within 1 entry of a page boundary we don't want our 2441 * first entry to be a PRP List entry. 2442 */ 2443 page_mask = PAGE_SIZE - 1; 2444 page_mask_result = (uintptr_t)((uint8_t *)prp_page + prp_size) & 2445 page_mask; 2446 if (!page_mask_result) 2447 { 2448 /* Bump up to next page boundary. */ 2449 prp_page = (uint64_t *)((uint8_t *)prp_page + prp_size); 2450 prp_page_phys = (uint64_t *)((uint8_t *)prp_page_phys + 2451 prp_size); 2452 } 2453 2454 /* 2455 * Set PRP physical pointer, which initially points to the current PRP 2456 * DMA memory page. 2457 */ 2458 prp_entry_phys = prp_page_phys; 2459 2460 /* Get physical address and length of the data buffer. */ 2461 paddr = (bus_addr_t)data; 2462 if (data_in_sz) 2463 length = data_in_sz; 2464 else 2465 length = data_out_sz; 2466 2467 /* Loop while the length is not zero. */ 2468 while (length) 2469 { 2470 /* 2471 * Check if we need to put a list pointer here if we are at page 2472 * boundary - prp_size (8 bytes). 2473 */ 2474 page_mask_result = (uintptr_t)((uint8_t *)prp_entry_phys + 2475 prp_size) & page_mask; 2476 if (!page_mask_result) 2477 { 2478 /* 2479 * This is the last entry in a PRP List, so we need to 2480 * put a PRP list pointer here. What this does is: 2481 * - bump the current memory pointer to the next 2482 * address, which will be the next full page. 2483 * - set the PRP Entry to point to that page. This is 2484 * now the PRP List pointer. 2485 * - bump the PRP Entry pointer the start of the next 2486 * page. Since all of this PRP memory is contiguous, 2487 * no need to get a new page - it's just the next 2488 * address. 2489 */ 2490 prp_entry_phys++; 2491 *prp_entry = 2492 htole64((uint64_t)(uintptr_t)prp_entry_phys); 2493 prp_entry++; 2494 } 2495 2496 /* Need to handle if entry will be part of a page. */ 2497 offset = (uint32_t)paddr & page_mask; 2498 entry_len = PAGE_SIZE - offset; 2499 2500 if (prp_entry == prp1_entry) 2501 { 2502 /* 2503 * Must fill in the first PRP pointer (PRP1) before 2504 * moving on. 2505 */ 2506 *prp1_entry = htole64((uint64_t)paddr); 2507 2508 /* 2509 * Now point to the second PRP entry within the 2510 * command (PRP2). 2511 */ 2512 prp_entry = prp2_entry; 2513 } 2514 else if (prp_entry == prp2_entry) 2515 { 2516 /* 2517 * Should the PRP2 entry be a PRP List pointer or just a 2518 * regular PRP pointer? If there is more than one more 2519 * page of data, must use a PRP List pointer. 2520 */ 2521 if (length > PAGE_SIZE) 2522 { 2523 /* 2524 * PRP2 will contain a PRP List pointer because 2525 * more PRP's are needed with this command. The 2526 * list will start at the beginning of the 2527 * contiguous buffer. 2528 */ 2529 *prp2_entry = 2530 htole64( 2531 (uint64_t)(uintptr_t)prp_entry_phys); 2532 2533 /* 2534 * The next PRP Entry will be the start of the 2535 * first PRP List. 2536 */ 2537 prp_entry = prp_page; 2538 } 2539 else 2540 { 2541 /* 2542 * After this, the PRP Entries are complete. 2543 * This command uses 2 PRP's and no PRP list. 2544 */ 2545 *prp2_entry = htole64((uint64_t)paddr); 2546 } 2547 } 2548 else 2549 { 2550 /* 2551 * Put entry in list and bump the addresses. 2552 * 2553 * After PRP1 and PRP2 are filled in, this will fill in 2554 * all remaining PRP entries in a PRP List, one per each 2555 * time through the loop. 2556 */ 2557 *prp_entry = htole64((uint64_t)paddr); 2558 prp_entry++; 2559 prp_entry_phys++; 2560 } 2561 2562 /* 2563 * Bump the phys address of the command's data buffer by the 2564 * entry_len. 2565 */ 2566 paddr += entry_len; 2567 2568 /* Decrement length accounting for last partial page. */ 2569 if (entry_len > length) 2570 length = 0; 2571 else 2572 length -= entry_len; 2573 } 2574} 2575 2576/* 2577 * mpr_check_pcie_native_sgl - This function is called for PCIe end devices to 2578 * determine if the driver needs to build a native SGL. If so, that native SGL 2579 * is built in the contiguous buffers allocated especially for PCIe SGL 2580 * creation. If the driver will not build a native SGL, return TRUE and a 2581 * normal IEEE SGL will be built. Currently this routine supports NVMe devices 2582 * only. 2583 * 2584 * Returns FALSE (0) if native SGL was built, TRUE (1) if no SGL was built. 2585 */ 2586static int 2587mpr_check_pcie_native_sgl(struct mpr_softc *sc, struct mpr_command *cm, 2588 bus_dma_segment_t *segs, int segs_left) 2589{ 2590 uint32_t i, sge_dwords, length, offset, entry_len; 2591 uint32_t num_entries, buff_len = 0, sges_in_segment; 2592 uint32_t page_mask, page_mask_result, *curr_buff; 2593 uint32_t *ptr_sgl, *ptr_first_sgl, first_page_offset; 2594 uint32_t first_page_data_size, end_residual; 2595 uint64_t *msg_phys; 2596 bus_addr_t paddr; 2597 int build_native_sgl = 0, first_prp_entry; 2598 int prp_size = PRP_ENTRY_SIZE; 2599 Mpi25IeeeSgeChain64_t *main_chain_element = NULL; 2600 struct mpr_prp_page *prp_page_info = NULL; 2601 2602 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 2603 2604 /* 2605 * Add up the sizes of each segment length to get the total transfer 2606 * size, which will be checked against the Maximum Data Transfer Size. 2607 * If the data transfer length exceeds the MDTS for this device, just 2608 * return 1 so a normal IEEE SGL will be built. F/W will break the I/O 2609 * up into multiple I/O's. [nvme_mdts = 0 means unlimited] 2610 */ 2611 for (i = 0; i < segs_left; i++) 2612 buff_len += htole32(segs[i].ds_len); 2613 if ((cm->cm_targ->MDTS > 0) && (buff_len > cm->cm_targ->MDTS)) 2614 return 1; 2615 2616 /* Create page_mask (to get offset within page) */ 2617 page_mask = PAGE_SIZE - 1; 2618 2619 /* 2620 * Check if the number of elements exceeds the max number that can be 2621 * put in the main message frame (H/W can only translate an SGL that 2622 * is contained entirely in the main message frame). 2623 */ 2624 sges_in_segment = (sc->facts->IOCRequestFrameSize - 2625 offsetof(Mpi25SCSIIORequest_t, SGL)) / sizeof(MPI25_SGE_IO_UNION); 2626 if (segs_left > sges_in_segment) 2627 build_native_sgl = 1; 2628 else 2629 { 2630 /* 2631 * NVMe uses one PRP for each physical page (or part of physical 2632 * page). 2633 * if 4 pages or less then IEEE is OK 2634 * if > 5 pages then we need to build a native SGL 2635 * if > 4 and <= 5 pages, then check the physical address of 2636 * the first SG entry, then if this first size in the page 2637 * is >= the residual beyond 4 pages then use IEEE, 2638 * otherwise use native SGL 2639 */ 2640 if (buff_len > (PAGE_SIZE * 5)) 2641 build_native_sgl = 1; 2642 else if ((buff_len > (PAGE_SIZE * 4)) && 2643 (buff_len <= (PAGE_SIZE * 5)) ) 2644 { 2645 msg_phys = (uint64_t *)segs[0].ds_addr; 2646 first_page_offset = 2647 ((uint32_t)(uint64_t)(uintptr_t)msg_phys & 2648 page_mask); 2649 first_page_data_size = PAGE_SIZE - first_page_offset; 2650 end_residual = buff_len % PAGE_SIZE; 2651 2652 /* 2653 * If offset into first page pushes the end of the data 2654 * beyond end of the 5th page, we need the extra PRP 2655 * list. 2656 */ 2657 if (first_page_data_size < end_residual) 2658 build_native_sgl = 1; 2659 2660 /* 2661 * Check if first SG entry size is < residual beyond 4 2662 * pages. 2663 */ 2664 if (htole32(segs[0].ds_len) < 2665 (buff_len - (PAGE_SIZE * 4))) 2666 build_native_sgl = 1; 2667 } 2668 } 2669 2670 /* check if native SGL is needed */ 2671 if (!build_native_sgl) 2672 return 1; 2673 2674 /* 2675 * Native SGL is needed. 2676 * Put a chain element in main message frame that points to the first 2677 * chain buffer. 2678 * 2679 * NOTE: The ChainOffset field must be 0 when using a chain pointer to 2680 * a native SGL. 2681 */ 2682 2683 /* Set main message chain element pointer */ 2684 main_chain_element = (pMpi25IeeeSgeChain64_t)cm->cm_sge; 2685 2686 /* 2687 * For NVMe the chain element needs to be the 2nd SGL entry in the main 2688 * message. 2689 */ 2690 main_chain_element = (Mpi25IeeeSgeChain64_t *) 2691 ((uint8_t *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64)); 2692 2693 /* 2694 * For the PRP entries, use the specially allocated buffer of 2695 * contiguous memory. PRP Page allocation failures should not happen 2696 * because there should be enough PRP page buffers to account for the 2697 * possible NVMe QDepth. 2698 */ 2699 prp_page_info = mpr_alloc_prp_page(sc); 2700 KASSERT(prp_page_info != NULL, ("%s: There are no PRP Pages left to be " 2701 "used for building a native NVMe SGL.\n", __func__)); 2702 curr_buff = (uint32_t *)prp_page_info->prp_page; 2703 msg_phys = (uint64_t *)(uintptr_t)prp_page_info->prp_page_busaddr; 2704 2705 /* 2706 * Insert the allocated PRP page into the command's PRP page list. This 2707 * will be freed when the command is freed. 2708 */ 2709 TAILQ_INSERT_TAIL(&cm->cm_prp_page_list, prp_page_info, prp_page_link); 2710 2711 /* 2712 * Check if we are within 1 entry of a page boundary we don't want our 2713 * first entry to be a PRP List entry. 2714 */ 2715 page_mask_result = (uintptr_t)((uint8_t *)curr_buff + prp_size) & 2716 page_mask; 2717 if (!page_mask_result) { 2718 /* Bump up to next page boundary. */ 2719 curr_buff = (uint32_t *)((uint8_t *)curr_buff + prp_size); 2720 msg_phys = (uint64_t *)((uint8_t *)msg_phys + prp_size); 2721 } 2722 2723 /* Fill in the chain element and make it an NVMe segment type. */ 2724 main_chain_element->Address.High = 2725 htole32((uint32_t)((uint64_t)(uintptr_t)msg_phys >> 32)); 2726 main_chain_element->Address.Low = 2727 htole32((uint32_t)(uintptr_t)msg_phys); 2728 main_chain_element->NextChainOffset = 0; 2729 main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | 2730 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | 2731 MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP; 2732 2733 /* Set SGL pointer to start of contiguous PCIe buffer. */ 2734 ptr_sgl = curr_buff; 2735 sge_dwords = 2; 2736 num_entries = 0; 2737 2738 /* 2739 * NVMe has a very convoluted PRP format. One PRP is required for each 2740 * page or partial page. We need to split up OS SG entries if they are 2741 * longer than one page or cross a page boundary. We also have to insert 2742 * a PRP list pointer entry as the last entry in each physical page of 2743 * the PRP list. 2744 * 2745 * NOTE: The first PRP "entry" is actually placed in the first SGL entry 2746 * in the main message in IEEE 64 format. The 2nd entry in the main 2747 * message is the chain element, and the rest of the PRP entries are 2748 * built in the contiguous PCIe buffer. 2749 */ 2750 first_prp_entry = 1; 2751 ptr_first_sgl = (uint32_t *)cm->cm_sge; 2752 2753 for (i = 0; i < segs_left; i++) { 2754 /* Get physical address and length of this SG entry. */ 2755 paddr = segs[i].ds_addr; 2756 length = segs[i].ds_len; 2757 2758 /* 2759 * Check whether a given SGE buffer lies on a non-PAGED 2760 * boundary if this is not the first page. If so, this is not 2761 * expected so have FW build the SGL. 2762 */ 2763 if (i) { 2764 if ((uint32_t)paddr & page_mask) { 2765 mpr_dprint(sc, MPR_ERROR, "Unaligned SGE while " 2766 "building NVMe PRPs, low address is 0x%x\n", 2767 (uint32_t)paddr); 2768 return 1; 2769 } 2770 } 2771 2772 /* Apart from last SGE, if any other SGE boundary is not page 2773 * aligned then it means that hole exists. Existence of hole 2774 * leads to data corruption. So fallback to IEEE SGEs. 2775 */ 2776 if (i != (segs_left - 1)) { 2777 if (((uint32_t)paddr + length) & page_mask) { 2778 mpr_dprint(sc, MPR_ERROR, "Unaligned SGE " 2779 "boundary while building NVMe PRPs, low " 2780 "address: 0x%x and length: %u\n", 2781 (uint32_t)paddr, length); 2782 return 1; 2783 } 2784 } 2785 2786 /* Loop while the length is not zero. */ 2787 while (length) { 2788 /* 2789 * Check if we need to put a list pointer here if we are 2790 * at page boundary - prp_size. 2791 */ 2792 page_mask_result = (uintptr_t)((uint8_t *)ptr_sgl + 2793 prp_size) & page_mask; 2794 if (!page_mask_result) { 2795 /* 2796 * Need to put a PRP list pointer here. 2797 */ 2798 msg_phys = (uint64_t *)((uint8_t *)msg_phys + 2799 prp_size); 2800 *ptr_sgl = htole32((uintptr_t)msg_phys); 2801 *(ptr_sgl+1) = htole32((uint64_t)(uintptr_t) 2802 msg_phys >> 32); 2803 ptr_sgl += sge_dwords; 2804 num_entries++; 2805 } 2806 2807 /* Need to handle if entry will be part of a page. */ 2808 offset = (uint32_t)paddr & page_mask; 2809 entry_len = PAGE_SIZE - offset; 2810 if (first_prp_entry) { 2811 /* 2812 * Put IEEE entry in first SGE in main message. 2813 * (Simple element, System addr, not end of 2814 * list.) 2815 */ 2816 *ptr_first_sgl = htole32((uint32_t)paddr); 2817 *(ptr_first_sgl + 1) = 2818 htole32((uint32_t)((uint64_t)paddr >> 32)); 2819 *(ptr_first_sgl + 2) = htole32(entry_len); 2820 *(ptr_first_sgl + 3) = 0; 2821 2822 /* No longer the first PRP entry. */ 2823 first_prp_entry = 0; 2824 } else { 2825 /* Put entry in list. */ 2826 *ptr_sgl = htole32((uint32_t)paddr); 2827 *(ptr_sgl + 1) = 2828 htole32((uint32_t)((uint64_t)paddr >> 32)); 2829 2830 /* Bump ptr_sgl, msg_phys, and num_entries. */ 2831 ptr_sgl += sge_dwords; 2832 msg_phys = (uint64_t *)((uint8_t *)msg_phys + 2833 prp_size); 2834 num_entries++; 2835 } 2836 2837 /* Bump the phys address by the entry_len. */ 2838 paddr += entry_len; 2839 2840 /* Decrement length accounting for last partial page. */ 2841 if (entry_len > length) 2842 length = 0; 2843 else 2844 length -= entry_len; 2845 } 2846 } 2847 2848 /* Set chain element Length. */ 2849 main_chain_element->Length = htole32(num_entries * prp_size); 2850 2851 /* Return 0, indicating we built a native SGL. */ 2852 return 0; 2853} 2854 2855/* 2856 * Add a chain element as the next SGE for the specified command. 2857 * Reset cm_sge and cm_sgesize to indicate all the available space. Chains are 2858 * only required for IEEE commands. Therefore there is no code for commands 2859 * that have the MPR_CM_FLAGS_SGE_SIMPLE flag set (and those commands 2860 * shouldn't be requesting chains). 2861 */ 2862static int 2863mpr_add_chain(struct mpr_command *cm, int segsleft) 2864{ 2865 struct mpr_softc *sc = cm->cm_sc; 2866 MPI2_REQUEST_HEADER *req; 2867 MPI25_IEEE_SGE_CHAIN64 *ieee_sgc; 2868 struct mpr_chain *chain; 2869 int sgc_size, current_segs, rem_segs, segs_per_frame; 2870 uint8_t next_chain_offset = 0; 2871 2872 /* 2873 * Fail if a command is requesting a chain for SIMPLE SGE's. For SAS3 2874 * only IEEE commands should be requesting chains. Return some error 2875 * code other than 0. 2876 */ 2877 if (cm->cm_flags & MPR_CM_FLAGS_SGE_SIMPLE) { 2878 mpr_dprint(sc, MPR_ERROR, "A chain element cannot be added to " 2879 "an MPI SGL.\n"); 2880 return(ENOBUFS); 2881 } 2882 2883 sgc_size = sizeof(MPI25_IEEE_SGE_CHAIN64); 2884 if (cm->cm_sglsize < sgc_size) 2885 panic("MPR: Need SGE Error Code\n"); 2886 2887 chain = mpr_alloc_chain(cm->cm_sc); 2888 if (chain == NULL) 2889 return (ENOBUFS); 2890 2891 /* 2892 * Note: a double-linked list is used to make it easier to walk for 2893 * debugging. 2894 */ 2895 TAILQ_INSERT_TAIL(&cm->cm_chain_list, chain, chain_link); 2896 2897 /* 2898 * Need to know if the number of frames left is more than 1 or not. If 2899 * more than 1 frame is required, NextChainOffset will need to be set, 2900 * which will just be the last segment of the frame. 2901 */ 2902 rem_segs = 0; 2903 if (cm->cm_sglsize < (sgc_size * segsleft)) { 2904 /* 2905 * rem_segs is the number of segements remaining after the 2906 * segments that will go into the current frame. Since it is 2907 * known that at least one more frame is required, account for 2908 * the chain element. To know if more than one more frame is 2909 * required, just check if there will be a remainder after using 2910 * the current frame (with this chain) and the next frame. If 2911 * so the NextChainOffset must be the last element of the next 2912 * frame. 2913 */ 2914 current_segs = (cm->cm_sglsize / sgc_size) - 1; 2915 rem_segs = segsleft - current_segs; 2916 segs_per_frame = sc->chain_frame_size / sgc_size; 2917 if (rem_segs > segs_per_frame) { 2918 next_chain_offset = segs_per_frame - 1; 2919 } 2920 } 2921 ieee_sgc = &((MPI25_SGE_IO_UNION *)cm->cm_sge)->IeeeChain; 2922 ieee_sgc->Length = next_chain_offset ? 2923 htole32((uint32_t)sc->chain_frame_size) : 2924 htole32((uint32_t)rem_segs * (uint32_t)sgc_size); 2925 ieee_sgc->NextChainOffset = next_chain_offset; 2926 ieee_sgc->Flags = (MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | 2927 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR); 2928 ieee_sgc->Address.Low = htole32(chain->chain_busaddr); 2929 ieee_sgc->Address.High = htole32(chain->chain_busaddr >> 32); 2930 cm->cm_sge = &((MPI25_SGE_IO_UNION *)chain->chain)->IeeeSimple; 2931 req = (MPI2_REQUEST_HEADER *)cm->cm_req; 2932 req->ChainOffset = (sc->chain_frame_size - sgc_size) >> 4; 2933 2934 cm->cm_sglsize = sc->chain_frame_size; 2935 return (0); 2936} 2937 2938/* 2939 * Add one scatter-gather element to the scatter-gather list for a command. 2940 * Maintain cm_sglsize and cm_sge as the remaining size and pointer to the 2941 * next SGE to fill in, respectively. In Gen3, the MPI SGL does not have a 2942 * chain, so don't consider any chain additions. 2943 */ 2944int 2945mpr_push_sge(struct mpr_command *cm, MPI2_SGE_SIMPLE64 *sge, size_t len, 2946 int segsleft) 2947{ 2948 uint32_t saved_buf_len, saved_address_low, saved_address_high; 2949 u32 sge_flags; 2950 2951 /* 2952 * case 1: >=1 more segment, no room for anything (error) 2953 * case 2: 1 more segment and enough room for it 2954 */ 2955 2956 if (cm->cm_sglsize < (segsleft * sizeof(MPI2_SGE_SIMPLE64))) { 2957 mpr_dprint(cm->cm_sc, MPR_ERROR, 2958 "%s: warning: Not enough room for MPI SGL in frame.\n", 2959 __func__); 2960 return(ENOBUFS); 2961 } 2962 2963 KASSERT(segsleft == 1, 2964 ("segsleft cannot be more than 1 for an MPI SGL; segsleft = %d\n", 2965 segsleft)); 2966 2967 /* 2968 * There is one more segment left to add for the MPI SGL and there is 2969 * enough room in the frame to add it. This is the normal case because 2970 * MPI SGL's don't have chains, otherwise something is wrong. 2971 * 2972 * If this is a bi-directional request, need to account for that 2973 * here. Save the pre-filled sge values. These will be used 2974 * either for the 2nd SGL or for a single direction SGL. If 2975 * cm_out_len is non-zero, this is a bi-directional request, so 2976 * fill in the OUT SGL first, then the IN SGL, otherwise just 2977 * fill in the IN SGL. Note that at this time, when filling in 2978 * 2 SGL's for a bi-directional request, they both use the same 2979 * DMA buffer (same cm command). 2980 */ 2981 saved_buf_len = sge->FlagsLength & 0x00FFFFFF; 2982 saved_address_low = sge->Address.Low; 2983 saved_address_high = sge->Address.High; 2984 if (cm->cm_out_len) { 2985 sge->FlagsLength = cm->cm_out_len | 2986 ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 2987 MPI2_SGE_FLAGS_END_OF_BUFFER | 2988 MPI2_SGE_FLAGS_HOST_TO_IOC | 2989 MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << 2990 MPI2_SGE_FLAGS_SHIFT); 2991 cm->cm_sglsize -= len; 2992 /* Endian Safe code */ 2993 sge_flags = sge->FlagsLength; 2994 sge->FlagsLength = htole32(sge_flags); 2995 sge->Address.High = htole32(sge->Address.High); 2996 sge->Address.Low = htole32(sge->Address.Low); 2997 bcopy(sge, cm->cm_sge, len); 2998 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); 2999 } 3000 sge->FlagsLength = saved_buf_len | 3001 ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 3002 MPI2_SGE_FLAGS_END_OF_BUFFER | 3003 MPI2_SGE_FLAGS_LAST_ELEMENT | 3004 MPI2_SGE_FLAGS_END_OF_LIST | 3005 MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << 3006 MPI2_SGE_FLAGS_SHIFT); 3007 if (cm->cm_flags & MPR_CM_FLAGS_DATAIN) { 3008 sge->FlagsLength |= 3009 ((uint32_t)(MPI2_SGE_FLAGS_IOC_TO_HOST) << 3010 MPI2_SGE_FLAGS_SHIFT); 3011 } else { 3012 sge->FlagsLength |= 3013 ((uint32_t)(MPI2_SGE_FLAGS_HOST_TO_IOC) << 3014 MPI2_SGE_FLAGS_SHIFT); 3015 } 3016 sge->Address.Low = saved_address_low; 3017 sge->Address.High = saved_address_high; 3018 3019 cm->cm_sglsize -= len; 3020 /* Endian Safe code */ 3021 sge_flags = sge->FlagsLength; 3022 sge->FlagsLength = htole32(sge_flags); 3023 sge->Address.High = htole32(sge->Address.High); 3024 sge->Address.Low = htole32(sge->Address.Low); 3025 bcopy(sge, cm->cm_sge, len); 3026 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); 3027 return (0); 3028} 3029 3030/* 3031 * Add one IEEE scatter-gather element (chain or simple) to the IEEE scatter- 3032 * gather list for a command. Maintain cm_sglsize and cm_sge as the 3033 * remaining size and pointer to the next SGE to fill in, respectively. 3034 */ 3035int 3036mpr_push_ieee_sge(struct mpr_command *cm, void *sgep, int segsleft) 3037{ 3038 MPI2_IEEE_SGE_SIMPLE64 *sge = sgep; 3039 int error, ieee_sge_size = sizeof(MPI25_SGE_IO_UNION); 3040 uint32_t saved_buf_len, saved_address_low, saved_address_high; 3041 uint32_t sge_length; 3042 3043 /* 3044 * case 1: No room for chain or segment (error). 3045 * case 2: Two or more segments left but only room for chain. 3046 * case 3: Last segment and room for it, so set flags. 3047 */ 3048 3049 /* 3050 * There should be room for at least one element, or there is a big 3051 * problem. 3052 */ 3053 if (cm->cm_sglsize < ieee_sge_size) 3054 panic("MPR: Need SGE Error Code\n"); 3055 3056 if ((segsleft >= 2) && (cm->cm_sglsize < (ieee_sge_size * 2))) { 3057 if ((error = mpr_add_chain(cm, segsleft)) != 0) 3058 return (error); 3059 } 3060 3061 if (segsleft == 1) { 3062 /* 3063 * If this is a bi-directional request, need to account for that 3064 * here. Save the pre-filled sge values. These will be used 3065 * either for the 2nd SGL or for a single direction SGL. If 3066 * cm_out_len is non-zero, this is a bi-directional request, so 3067 * fill in the OUT SGL first, then the IN SGL, otherwise just 3068 * fill in the IN SGL. Note that at this time, when filling in 3069 * 2 SGL's for a bi-directional request, they both use the same 3070 * DMA buffer (same cm command). 3071 */ 3072 saved_buf_len = sge->Length; 3073 saved_address_low = sge->Address.Low; 3074 saved_address_high = sge->Address.High; 3075 if (cm->cm_out_len) { 3076 sge->Length = cm->cm_out_len; 3077 sge->Flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | 3078 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR); 3079 cm->cm_sglsize -= ieee_sge_size; 3080 /* Endian Safe code */ 3081 sge_length = sge->Length; 3082 sge->Length = htole32(sge_length); 3083 sge->Address.High = htole32(sge->Address.High); 3084 sge->Address.Low = htole32(sge->Address.Low); 3085 bcopy(sgep, cm->cm_sge, ieee_sge_size); 3086 cm->cm_sge = 3087 (MPI25_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + 3088 ieee_sge_size); 3089 } 3090 sge->Length = saved_buf_len; 3091 sge->Flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | 3092 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | 3093 MPI25_IEEE_SGE_FLAGS_END_OF_LIST); 3094 sge->Address.Low = saved_address_low; 3095 sge->Address.High = saved_address_high; 3096 } 3097 3098 cm->cm_sglsize -= ieee_sge_size; 3099 /* Endian Safe code */ 3100 sge_length = sge->Length; 3101 sge->Length = htole32(sge_length); 3102 sge->Address.High = htole32(sge->Address.High); 3103 sge->Address.Low = htole32(sge->Address.Low); 3104 bcopy(sgep, cm->cm_sge, ieee_sge_size); 3105 cm->cm_sge = (MPI25_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + 3106 ieee_sge_size); 3107 return (0); 3108} 3109 3110/* 3111 * Add one dma segment to the scatter-gather list for a command. 3112 */ 3113int 3114mpr_add_dmaseg(struct mpr_command *cm, vm_paddr_t pa, size_t len, u_int flags, 3115 int segsleft) 3116{ 3117 MPI2_SGE_SIMPLE64 sge; 3118 MPI2_IEEE_SGE_SIMPLE64 ieee_sge; 3119 3120 if (!(cm->cm_flags & MPR_CM_FLAGS_SGE_SIMPLE)) { 3121 ieee_sge.Flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | 3122 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR); 3123 ieee_sge.Length = len; 3124 mpr_from_u64(pa, &ieee_sge.Address); 3125 3126 return (mpr_push_ieee_sge(cm, &ieee_sge, segsleft)); 3127 } else { 3128 /* 3129 * This driver always uses 64-bit address elements for 3130 * simplicity. 3131 */ 3132 flags |= MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 3133 MPI2_SGE_FLAGS_64_BIT_ADDRESSING; 3134 /* Set Endian safe macro in mpr_push_sge */ 3135 sge.FlagsLength = len | (flags << MPI2_SGE_FLAGS_SHIFT); 3136 mpr_from_u64(pa, &sge.Address); 3137 3138 return (mpr_push_sge(cm, &sge, sizeof sge, segsleft)); 3139 } 3140} 3141 3142static void 3143mpr_data_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 3144{ 3145 struct mpr_softc *sc; 3146 struct mpr_command *cm; 3147 u_int i, dir, sflags; 3148 3149 cm = (struct mpr_command *)arg; 3150 sc = cm->cm_sc; 3151 3152 /* 3153 * In this case, just print out a warning and let the chip tell the 3154 * user they did the wrong thing. 3155 */ 3156 if ((cm->cm_max_segs != 0) && (nsegs > cm->cm_max_segs)) { 3157 mpr_dprint(sc, MPR_ERROR, "%s: warning: busdma returned %d " 3158 "segments, more than the %d allowed\n", __func__, nsegs, 3159 cm->cm_max_segs); 3160 } 3161 3162 /* 3163 * Set up DMA direction flags. Bi-directional requests are also handled 3164 * here. In that case, both direction flags will be set. 3165 */ 3166 sflags = 0; 3167 if (cm->cm_flags & MPR_CM_FLAGS_SMP_PASS) { 3168 /* 3169 * We have to add a special case for SMP passthrough, there 3170 * is no easy way to generically handle it. The first 3171 * S/G element is used for the command (therefore the 3172 * direction bit needs to be set). The second one is used 3173 * for the reply. We'll leave it to the caller to make 3174 * sure we only have two buffers. 3175 */ 3176 /* 3177 * Even though the busdma man page says it doesn't make 3178 * sense to have both direction flags, it does in this case. 3179 * We have one s/g element being accessed in each direction. 3180 */ 3181 dir = BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD; 3182 3183 /* 3184 * Set the direction flag on the first buffer in the SMP 3185 * passthrough request. We'll clear it for the second one. 3186 */ 3187 sflags |= MPI2_SGE_FLAGS_DIRECTION | 3188 MPI2_SGE_FLAGS_END_OF_BUFFER; 3189 } else if (cm->cm_flags & MPR_CM_FLAGS_DATAOUT) { 3190 sflags |= MPI2_SGE_FLAGS_HOST_TO_IOC; 3191 dir = BUS_DMASYNC_PREWRITE; 3192 } else 3193 dir = BUS_DMASYNC_PREREAD; 3194 3195 /* Check if a native SG list is needed for an NVMe PCIe device. */ 3196 if (cm->cm_targ && cm->cm_targ->is_nvme && 3197 mpr_check_pcie_native_sgl(sc, cm, segs, nsegs) == 0) { 3198 /* A native SG list was built, skip to end. */ 3199 goto out; 3200 } 3201 3202 for (i = 0; i < nsegs; i++) { 3203 if ((cm->cm_flags & MPR_CM_FLAGS_SMP_PASS) && (i != 0)) { 3204 sflags &= ~MPI2_SGE_FLAGS_DIRECTION; 3205 } 3206 error = mpr_add_dmaseg(cm, segs[i].ds_addr, segs[i].ds_len, 3207 sflags, nsegs - i); 3208 if (error != 0) { 3209 /* Resource shortage, roll back! */ 3210 if (ratecheck(&sc->lastfail, &mpr_chainfail_interval)) 3211 mpr_dprint(sc, MPR_INFO, "Out of chain frames, " 3212 "consider increasing hw.mpr.max_chains.\n"); 3213 cm->cm_flags |= MPR_CM_FLAGS_CHAIN_FAILED; 3214 mpr_complete_command(sc, cm); 3215 return; 3216 } 3217 } 3218 3219out: 3220 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir); 3221 mpr_enqueue_request(sc, cm); 3222 3223 return; 3224} 3225 3226static void 3227mpr_data_cb2(void *arg, bus_dma_segment_t *segs, int nsegs, bus_size_t mapsize, 3228 int error) 3229{ 3230 mpr_data_cb(arg, segs, nsegs, error); 3231} 3232 3233/* 3234 * This is the routine to enqueue commands ansynchronously. 3235 * Note that the only error path here is from bus_dmamap_load(), which can 3236 * return EINPROGRESS if it is waiting for resources. Other than this, it's 3237 * assumed that if you have a command in-hand, then you have enough credits 3238 * to use it. 3239 */ 3240int 3241mpr_map_command(struct mpr_softc *sc, struct mpr_command *cm) 3242{ 3243 int error = 0; 3244 3245 if (cm->cm_flags & MPR_CM_FLAGS_USE_UIO) { 3246 error = bus_dmamap_load_uio(sc->buffer_dmat, cm->cm_dmamap, 3247 &cm->cm_uio, mpr_data_cb2, cm, 0); 3248 } else if (cm->cm_flags & MPR_CM_FLAGS_USE_CCB) { 3249 error = bus_dmamap_load_ccb(sc->buffer_dmat, cm->cm_dmamap, 3250 cm->cm_data, mpr_data_cb, cm, 0); 3251 } else if ((cm->cm_data != NULL) && (cm->cm_length != 0)) { 3252 error = bus_dmamap_load(sc->buffer_dmat, cm->cm_dmamap, 3253 cm->cm_data, cm->cm_length, mpr_data_cb, cm, 0); 3254 } else { 3255 /* Add a zero-length element as needed */ 3256 if (cm->cm_sge != NULL) 3257 mpr_add_dmaseg(cm, 0, 0, 0, 1); 3258 mpr_enqueue_request(sc, cm); 3259 } 3260 3261 return (error); 3262} 3263 3264/* 3265 * This is the routine to enqueue commands synchronously. An error of 3266 * EINPROGRESS from mpr_map_command() is ignored since the command will 3267 * be executed and enqueued automatically. Other errors come from msleep(). 3268 */ 3269int 3270mpr_wait_command(struct mpr_softc *sc, struct mpr_command **cmp, int timeout, 3271 int sleep_flag) 3272{ 3273 int error, rc; 3274 struct timeval cur_time, start_time; 3275 struct mpr_command *cm = *cmp; 3276 3277 if (sc->mpr_flags & MPR_FLAGS_DIAGRESET) 3278 return EBUSY; 3279 3280 cm->cm_complete = NULL; 3281 cm->cm_flags |= (MPR_CM_FLAGS_WAKEUP + MPR_CM_FLAGS_POLLED); 3282 error = mpr_map_command(sc, cm); 3283 if ((error != 0) && (error != EINPROGRESS)) 3284 return (error); 3285 3286 // Check for context and wait for 50 mSec at a time until time has 3287 // expired or the command has finished. If msleep can't be used, need 3288 // to poll. 3289#if __FreeBSD_version >= 1000029 3290 if (curthread->td_no_sleeping) 3291#else //__FreeBSD_version < 1000029 3292 if (curthread->td_pflags & TDP_NOSLEEPING) 3293#endif //__FreeBSD_version >= 1000029 3294 sleep_flag = NO_SLEEP; 3295 getmicrouptime(&start_time); 3296 if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP) { 3297 error = msleep(cm, &sc->mpr_mtx, 0, "mprwait", timeout*hz); 3298 if (error == EWOULDBLOCK) { 3299 /* 3300 * Record the actual elapsed time in the case of a 3301 * timeout for the message below. 3302 */ 3303 getmicrouptime(&cur_time); 3304 timevalsub(&cur_time, &start_time); 3305 } 3306 } else { 3307 while ((cm->cm_flags & MPR_CM_FLAGS_COMPLETE) == 0) { 3308 mpr_intr_locked(sc); 3309 if (sleep_flag == CAN_SLEEP) 3310 pause("mprwait", hz/20); 3311 else 3312 DELAY(50000); 3313 3314 getmicrouptime(&cur_time); 3315 timevalsub(&cur_time, &start_time); 3316 if (cur_time.tv_sec > timeout) { 3317 error = EWOULDBLOCK; 3318 break; 3319 } 3320 } 3321 } 3322 3323 if (error == EWOULDBLOCK) { 3324 mpr_dprint(sc, MPR_FAULT, "Calling Reinit from %s, timeout=%d," 3325 " elapsed=%jd\n", __func__, timeout, 3326 (intmax_t)cur_time.tv_sec); 3327 rc = mpr_reinit(sc); 3328 mpr_dprint(sc, MPR_FAULT, "Reinit %s\n", (rc == 0) ? "success" : 3329 "failed"); 3330 if (sc->mpr_flags & MPR_FLAGS_REALLOCATED) { 3331 /* 3332 * Tell the caller that we freed the command in a 3333 * reinit. 3334 */ 3335 *cmp = NULL; 3336 } 3337 error = ETIMEDOUT; 3338 } 3339 return (error); 3340} 3341 3342/* 3343 * This is the routine to enqueue a command synchonously and poll for 3344 * completion. Its use should be rare. 3345 */ 3346int 3347mpr_request_polled(struct mpr_softc *sc, struct mpr_command **cmp) 3348{ 3349 int error, rc; 3350 struct timeval cur_time, start_time; 3351 struct mpr_command *cm = *cmp; 3352 3353 error = 0; 3354 3355 cm->cm_flags |= MPR_CM_FLAGS_POLLED; 3356 cm->cm_complete = NULL; 3357 mpr_map_command(sc, cm); 3358 3359 getmicrouptime(&start_time); 3360 while ((cm->cm_flags & MPR_CM_FLAGS_COMPLETE) == 0) { 3361 mpr_intr_locked(sc); 3362 3363 if (mtx_owned(&sc->mpr_mtx)) 3364 msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0, 3365 "mprpoll", hz/20); 3366 else 3367 pause("mprpoll", hz/20); 3368 3369 /* 3370 * Check for real-time timeout and fail if more than 60 seconds. 3371 */ 3372 getmicrouptime(&cur_time); 3373 timevalsub(&cur_time, &start_time); 3374 if (cur_time.tv_sec > 60) { 3375 mpr_dprint(sc, MPR_FAULT, "polling failed\n"); 3376 error = ETIMEDOUT; 3377 break; 3378 } 3379 } 3380 3381 if (error) { 3382 mpr_dprint(sc, MPR_FAULT, "Calling Reinit from %s\n", __func__); 3383 rc = mpr_reinit(sc); 3384 mpr_dprint(sc, MPR_FAULT, "Reinit %s\n", (rc == 0) ? "success" : 3385 "failed"); 3386 3387 if (sc->mpr_flags & MPR_FLAGS_REALLOCATED) { 3388 /* 3389 * Tell the caller that we freed the command in a 3390 * reinit. 3391 */ 3392 *cmp = NULL; 3393 } 3394 } 3395 return (error); 3396} 3397 3398/* 3399 * The MPT driver had a verbose interface for config pages. In this driver, 3400 * reduce it to much simplier terms, similar to the Linux driver. 3401 */ 3402int 3403mpr_read_config_page(struct mpr_softc *sc, struct mpr_config_params *params) 3404{ 3405 MPI2_CONFIG_REQUEST *req; 3406 struct mpr_command *cm; 3407 int error; 3408 3409 if (sc->mpr_flags & MPR_FLAGS_BUSY) { 3410 return (EBUSY); 3411 } 3412 3413 cm = mpr_alloc_command(sc); 3414 if (cm == NULL) { 3415 return (EBUSY); 3416 } 3417 3418 req = (MPI2_CONFIG_REQUEST *)cm->cm_req; 3419 req->Function = MPI2_FUNCTION_CONFIG; 3420 req->Action = params->action; 3421 req->SGLFlags = 0; 3422 req->ChainOffset = 0; 3423 req->PageAddress = params->page_address; 3424 if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) { 3425 MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr; 3426 3427 hdr = ¶ms->hdr.Ext; 3428 req->ExtPageType = hdr->ExtPageType; 3429 req->ExtPageLength = hdr->ExtPageLength; 3430 req->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; 3431 req->Header.PageLength = 0; /* Must be set to zero */ 3432 req->Header.PageNumber = hdr->PageNumber; 3433 req->Header.PageVersion = hdr->PageVersion; 3434 } else { 3435 MPI2_CONFIG_PAGE_HEADER *hdr; 3436 3437 hdr = ¶ms->hdr.Struct; 3438 req->Header.PageType = hdr->PageType; 3439 req->Header.PageNumber = hdr->PageNumber; 3440 req->Header.PageLength = hdr->PageLength; 3441 req->Header.PageVersion = hdr->PageVersion; 3442 } 3443 3444 cm->cm_data = params->buffer; 3445 cm->cm_length = params->length; 3446 if (cm->cm_data != NULL) { 3447 cm->cm_sge = &req->PageBufferSGE; 3448 cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); 3449 cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN; 3450 } else 3451 cm->cm_sge = NULL; 3452 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 3453 3454 cm->cm_complete_data = params; 3455 if (params->callback != NULL) { 3456 cm->cm_complete = mpr_config_complete; 3457 return (mpr_map_command(sc, cm)); 3458 } else { 3459 error = mpr_wait_command(sc, &cm, 0, CAN_SLEEP); 3460 if (error) { 3461 mpr_dprint(sc, MPR_FAULT, 3462 "Error %d reading config page\n", error); 3463 if (cm != NULL) 3464 mpr_free_command(sc, cm); 3465 return (error); 3466 } 3467 mpr_config_complete(sc, cm); 3468 } 3469 3470 return (0); 3471} 3472 3473int 3474mpr_write_config_page(struct mpr_softc *sc, struct mpr_config_params *params) 3475{ 3476 return (EINVAL); 3477} 3478 3479static void 3480mpr_config_complete(struct mpr_softc *sc, struct mpr_command *cm) 3481{ 3482 MPI2_CONFIG_REPLY *reply; 3483 struct mpr_config_params *params; 3484 3485 MPR_FUNCTRACE(sc); 3486 params = cm->cm_complete_data; 3487 3488 if (cm->cm_data != NULL) { 3489 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, 3490 BUS_DMASYNC_POSTREAD); 3491 bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap); 3492 } 3493 3494 /* 3495 * XXX KDM need to do more error recovery? This results in the 3496 * device in question not getting probed. 3497 */ 3498 if ((cm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) { 3499 params->status = MPI2_IOCSTATUS_BUSY; 3500 goto done; 3501 } 3502 3503 reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; 3504 if (reply == NULL) { 3505 params->status = MPI2_IOCSTATUS_BUSY; 3506 goto done; 3507 } 3508 params->status = reply->IOCStatus; 3509 if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) { 3510 params->hdr.Ext.ExtPageType = reply->ExtPageType; 3511 params->hdr.Ext.ExtPageLength = reply->ExtPageLength; 3512 params->hdr.Ext.PageType = reply->Header.PageType; 3513 params->hdr.Ext.PageNumber = reply->Header.PageNumber; 3514 params->hdr.Ext.PageVersion = reply->Header.PageVersion; 3515 } else { 3516 params->hdr.Struct.PageType = reply->Header.PageType; 3517 params->hdr.Struct.PageNumber = reply->Header.PageNumber; 3518 params->hdr.Struct.PageLength = reply->Header.PageLength; 3519 params->hdr.Struct.PageVersion = reply->Header.PageVersion; 3520 } 3521 3522done: 3523 mpr_free_command(sc, cm); 3524 if (params->callback != NULL) 3525 params->callback(sc, params); 3526 3527 return; 3528} 3529