1/*-
2 * Copyright (c) 2011-2012 Stefan Bethke.
3 * Copyright (c) 2012 Adrian Chadd.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 * $FreeBSD$
28 */
29
30#include <sys/param.h>
31#include <sys/bus.h>
32#include <sys/errno.h>
33#include <sys/kernel.h>
34#include <sys/module.h>
35#include <sys/socket.h>
36#include <sys/sockio.h>
37#include <sys/sysctl.h>
38#include <sys/systm.h>
39
40#include <net/if.h>
41#include <net/if_arp.h>
42#include <net/ethernet.h>
43#include <net/if_dl.h>
44#include <net/if_media.h>
45#include <net/if_types.h>
46
47#include <machine/bus.h>
48#include <dev/iicbus/iic.h>
49#include <dev/iicbus/iiconf.h>
50#include <dev/iicbus/iicbus.h>
51#include <dev/mii/mii.h>
52#include <dev/mii/miivar.h>
53#include <dev/etherswitch/mdio.h>
54
55#include <dev/etherswitch/etherswitch.h>
56
57#include <dev/etherswitch/arswitch/arswitchreg.h>
58#include <dev/etherswitch/arswitch/arswitchvar.h>
59#include <dev/etherswitch/arswitch/arswitch_reg.h>
60#include <dev/etherswitch/arswitch/arswitch_phy.h>	/* XXX for probe */
61#include <dev/etherswitch/arswitch/arswitch_7240.h>
62
63#include "mdio_if.h"
64#include "miibus_if.h"
65#include "etherswitch_if.h"
66
67/*
68 * AR7240 specific functions
69 */
70static int
71ar7240_hw_setup(struct arswitch_softc *sc)
72{
73
74	return (0);
75}
76
77/*
78 * Initialise other global values for the AR7240.
79 */
80static int
81ar7240_hw_global_setup(struct arswitch_softc *sc)
82{
83
84	/* Enable CPU port; disable mirror port */
85	arswitch_writereg(sc->sc_dev, AR8X16_REG_CPU_PORT,
86	    AR8X16_CPU_PORT_EN | AR8X16_CPU_MIRROR_DIS);
87
88	/* Setup TAG priority mapping */
89	arswitch_writereg(sc->sc_dev, AR8X16_REG_TAG_PRIO, 0xfa50);
90
91	/* Enable broadcast frames transmitted to the CPU */
92	arswitch_writereg(sc->sc_dev, AR8X16_REG_FLOOD_MASK,
93	    AR8X16_FLOOD_MASK_BCAST_TO_CPU | 0x003f003f);
94
95	/* Setup MTU */
96	arswitch_modifyreg(sc->sc_dev, AR8X16_REG_GLOBAL_CTRL,
97	    AR7240_GLOBAL_CTRL_MTU_MASK,
98	    SM(1536, AR7240_GLOBAL_CTRL_MTU_MASK));
99
100	/* Service Tag */
101	arswitch_modifyreg(sc->sc_dev, AR8X16_REG_SERVICE_TAG,
102	    AR8X16_SERVICE_TAG_MASK, 0);
103
104	return (0);
105}
106
107/*
108 * The AR7240 probes the same as the AR8216.
109 *
110 * However, the support is slightly different.
111 *
112 * So instead of checking the PHY revision or mask register contents,
113 * we simply fall back to a hint check.
114 */
115int
116ar7240_probe(device_t dev)
117{
118	int is_7240 = 0;
119
120	if (resource_int_value(device_get_name(dev), device_get_unit(dev),
121	    "is_7240", &is_7240) != 0)
122		return (ENXIO);
123
124	if (is_7240 == 0)
125		return (ENXIO);
126
127	return (0);
128}
129
130void
131ar7240_attach(struct arswitch_softc *sc)
132{
133
134	sc->hal.arswitch_hw_setup = ar7240_hw_setup;
135	sc->hal.arswitch_hw_global_setup = ar7240_hw_global_setup;
136
137	/* Set the switch vlan capabilities. */
138	sc->info.es_vlan_caps = ETHERSWITCH_VLAN_DOT1Q |
139	    ETHERSWITCH_VLAN_PORT | ETHERSWITCH_VLAN_DOUBLE_TAG;
140	sc->info.es_nvlangroups = AR8X16_MAX_VLANS;
141}
142