dcphy.c revision 54577
1/*
2 * Copyright (c) 1997, 1998, 1999
3 *	Bill Paul <wpaul@ee.columbia.edu>.  All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 *    must display the following acknowledgement:
15 *	This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 *    may be used to endorse or promote products derived from this software
18 *    without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
31 *
32 * $FreeBSD: head/sys/dev/dc/dcphy.c 54577 1999-12-13 21:45:13Z wpaul $
33 */
34
35/*
36 * Pseudo-driver for internal NWAY support on DEC 21143 and workalike
37 * controllers. Technically we're abusing the miibus code to handle
38 * media selection and NWAY support here since there is no MII
39 * interface. However the logical operations are roughly the same,
40 * and the alternative is to create a fake MII interface in the driver,
41 * which is harder to do.
42 */
43
44#include <sys/param.h>
45#include <sys/systm.h>
46#include <sys/kernel.h>
47#include <sys/malloc.h>
48#include <sys/socket.h>
49#include <sys/errno.h>
50#include <sys/module.h>
51#include <sys/bus.h>
52
53#include <net/if.h>
54#include <net/if_arp.h>
55#include <net/if_media.h>
56
57#include <dev/mii/mii.h>
58#include <dev/mii/miivar.h>
59#include <dev/mii/miidevs.h>
60
61#include <machine/clock.h>
62#include <machine/bus_pio.h>
63#include <machine/bus_memio.h>
64#include <machine/bus.h>
65#include <machine/resource.h>
66#include <sys/bus.h>
67
68#include <pci/pcivar.h>
69
70#include <pci/if_dcreg.h>
71
72#include "miibus_if.h"
73
74#if !defined(lint)
75static const char rcsid[] =
76  "$FreeBSD: head/sys/dev/dc/dcphy.c 54577 1999-12-13 21:45:13Z wpaul $";
77#endif
78
79#define DC_SETBIT(sc, reg, x)                           \
80        CSR_WRITE_4(sc, reg,                            \
81                CSR_READ_4(sc, reg) | x)
82
83#define DC_CLRBIT(sc, reg, x)                           \
84        CSR_WRITE_4(sc, reg,                            \
85                CSR_READ_4(sc, reg) & ~x)
86
87#define MIIF_AUTOTIMEOUT	0x0004
88
89/*
90 * This is the subsystem ID for the built-in 21143 ethernet
91 * in several Compaq Presario systems. Apparently these are
92 * 10Mbps only, so we need to treat them specially.
93 */
94#define COMPAQ_PRESARIO_ID	0xb0bb0e11
95
96static int dcphy_probe		__P((device_t));
97static int dcphy_attach		__P((device_t));
98static int dcphy_detach		__P((device_t));
99
100static device_method_t dcphy_methods[] = {
101	/* device interface */
102	DEVMETHOD(device_probe,		dcphy_probe),
103	DEVMETHOD(device_attach,	dcphy_attach),
104	DEVMETHOD(device_detach,	dcphy_detach),
105	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
106	{ 0, 0 }
107};
108
109static devclass_t dcphy_devclass;
110
111static driver_t dcphy_driver = {
112	"dcphy",
113	dcphy_methods,
114	sizeof(struct mii_softc)
115};
116
117DRIVER_MODULE(dcphy, miibus, dcphy_driver, dcphy_devclass, 0, 0);
118
119int	dcphy_service __P((struct mii_softc *, struct mii_data *, int));
120void	dcphy_status __P((struct mii_softc *));
121static int dcphy_auto		__P((struct mii_softc *, int));
122static void dcphy_reset		__P((struct mii_softc *));
123
124static int dcphy_probe(dev)
125	device_t		dev;
126{
127	struct mii_attach_args *ma;
128
129	ma = device_get_ivars(dev);
130
131	/*
132	 * The dc driver will report the 21143 vendor and device
133	 * ID to let us know that it wants us to attach.
134	 */
135	if (ma->mii_id1 != DC_VENDORID_DEC ||
136	    ma->mii_id2 != DC_DEVICEID_21143)
137		return(ENXIO);
138
139	device_set_desc(dev, "Intel 21143 NWAY media interface");
140
141	return (0);
142}
143
144static int dcphy_attach(dev)
145	device_t		dev;
146{
147	struct mii_softc *sc;
148	struct mii_attach_args *ma;
149	struct mii_data *mii;
150	struct dc_softc		*dc_sc;
151
152	sc = device_get_softc(dev);
153	ma = device_get_ivars(dev);
154	sc->mii_dev = device_get_parent(dev);
155	mii = device_get_softc(sc->mii_dev);
156	LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
157
158	sc->mii_inst = mii->mii_instance;
159	sc->mii_phy = ma->mii_phyno;
160	sc->mii_service = dcphy_service;
161	sc->mii_pdata = mii;
162
163	sc->mii_flags |= MIIF_NOISOLATE;
164	mii->mii_instance++;
165
166#define	ADD(m, c)	ifmedia_add(&mii->mii_media, (m), (c), NULL)
167
168	ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
169	    BMCR_ISO);
170
171	/*dcphy_reset(sc);*/
172	dc_sc = mii->mii_ifp->if_softc;
173	CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0);
174	CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0);
175
176	switch(pci_read_config(device_get_parent(sc->mii_dev),
177	    DC_PCI_CSID, 4)) {
178	case COMPAQ_PRESARIO_ID:
179		/* Example of how to only allow 10Mbps modes. */
180		sc->mii_capabilities = BMSR_ANEG|BMSR_10TFDX|BMSR_10THDX;
181		break;
182	default:
183		ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP,
184		    sc->mii_inst), BMCR_LOOP|BMCR_S100);
185
186		sc->mii_capabilities =
187		    BMSR_ANEG|BMSR_100TXFDX|BMSR_100TXHDX|
188		    BMSR_10TFDX|BMSR_10THDX;
189		break;
190	}
191
192	sc->mii_capabilities &= ma->mii_capmask;
193	device_printf(dev, " ");
194	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
195		printf("no media present");
196	else
197		mii_add_media(mii, sc->mii_capabilities, sc->mii_inst);
198	printf("\n");
199#undef ADD
200
201	MIIBUS_MEDIAINIT(sc->mii_dev);
202	return(0);
203}
204
205static int dcphy_detach(dev)
206	device_t		dev;
207{
208	struct mii_softc *sc;
209	struct mii_data *mii;
210
211	sc = device_get_softc(dev);
212	mii = device_get_softc(device_get_parent(dev));
213	sc->mii_dev = NULL;
214	LIST_REMOVE(sc, mii_list);
215
216	return(0);
217}
218
219int
220dcphy_service(sc, mii, cmd)
221	struct mii_softc *sc;
222	struct mii_data *mii;
223	int cmd;
224{
225	struct dc_softc		*dc_sc;
226	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
227	int reg;
228	u_int32_t		mode;
229
230	dc_sc = mii->mii_ifp->if_softc;
231
232	switch (cmd) {
233	case MII_POLLSTAT:
234		/*
235		 * If we're not polling our PHY instance, just return.
236		 */
237		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
238			return (0);
239		}
240		break;
241
242	case MII_MEDIACHG:
243		/*
244		 * If the media indicates a different PHY instance,
245		 * isolate ourselves.
246		 */
247		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
248			return (0);
249		}
250
251		/*
252		 * If the interface is not up, don't do anything.
253		 */
254		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
255			break;
256
257		sc->mii_flags = 0;
258		mii->mii_media_active = IFM_NONE;
259		mode = CSR_READ_4(dc_sc, DC_NETCFG);
260		mode &= ~(DC_NETCFG_FULLDUPLEX|DC_NETCFG_PORTSEL|
261		    DC_NETCFG_PCS|DC_NETCFG_SCRAMBLER|DC_NETCFG_SPEEDSEL);
262
263		switch (IFM_SUBTYPE(ife->ifm_media)) {
264		case IFM_AUTO:
265			/*dcphy_reset(sc);*/
266			(void) dcphy_auto(sc, 0);
267			break;
268		case IFM_100_T4:
269			/*
270			 * XXX Not supported as a manual setting right now.
271			 */
272			return (EINVAL);
273		case IFM_100_TX:
274			dcphy_reset(sc);
275			DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
276			mode |= DC_NETCFG_PORTSEL|DC_NETCFG_PCS|
277			    DC_NETCFG_SCRAMBLER;
278			if ((ife->ifm_media & IFM_GMASK) == IFM_FDX)
279				mode |= DC_NETCFG_FULLDUPLEX;
280			else
281				mode &= ~DC_NETCFG_FULLDUPLEX;
282			CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
283			break;
284		case IFM_10_T:
285			DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
286			DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF);
287			if ((ife->ifm_media & IFM_GMASK) == IFM_FDX)
288				DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D);
289			else
290				DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F);
291			DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
292			DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
293			mode &= ~DC_NETCFG_PORTSEL;
294			mode |= DC_NETCFG_SPEEDSEL;
295			if ((ife->ifm_media & IFM_GMASK) == IFM_FDX)
296				mode |= DC_NETCFG_FULLDUPLEX;
297			else
298				mode &= ~DC_NETCFG_FULLDUPLEX;
299			CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
300			break;
301		default:
302			return(EINVAL);
303			break;
304		}
305		break;
306
307	case MII_TICK:
308		/*
309		 * If we're not currently selected, just return.
310		 */
311		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
312			return (0);
313
314		/*
315		 * Only used for autonegotiation.
316		 */
317		if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
318			return (0);
319
320		/*
321		 * Is the interface even up?
322		 */
323		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
324			return (0);
325
326		if (sc->mii_flags & MIIF_DOINGAUTO) {
327			if (++sc->mii_ticks != 5)
328				return(0);
329			else {
330				sc->mii_ticks = 0;
331				sc->mii_flags &= ~MIIF_DOINGAUTO;
332				sc->mii_flags |= MIIF_AUTOTIMEOUT;
333			}
334		}
335
336		sc->mii_flags &= ~MIIF_DOINGAUTO;
337
338		/*
339		 * Check to see if we have link.  If we do, we don't
340		 * need to restart the autonegotiation process.  Read
341		 * the BMSR twice in case it's latched.
342		 */
343		reg = CSR_READ_4(dc_sc, DC_10BTSTAT) &
344		    (DC_TSTAT_LS10|DC_TSTAT_LS100);
345
346		if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX &&
347		    !(reg & DC_TSTAT_LS100)) {
348			if (sc->mii_flags & MIIF_AUTOTIMEOUT) {
349				sc->mii_flags &= ~MIIF_AUTOTIMEOUT;
350				break;
351			} else
352				return(0);
353		} else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T &&
354		    !(reg & DC_TSTAT_LS10)) {
355			if (sc->mii_flags & MIIF_AUTOTIMEOUT) {
356				sc->mii_flags &= ~MIIF_AUTOTIMEOUT;
357				break;
358			} else
359				return(0);
360		} else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE &&
361		    (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))) {
362			if (sc->mii_flags & MIIF_AUTOTIMEOUT) {
363				sc->mii_flags &= ~MIIF_AUTOTIMEOUT;
364				break;
365			} else
366				return(0);
367		} else if (CSR_READ_4(dc_sc, DC_ISR) & DC_ISR_LINKGOOD) {
368			if (sc->mii_flags & MIIF_AUTOTIMEOUT) {
369				sc->mii_flags &= ~MIIF_AUTOTIMEOUT;
370				break;
371			} else
372				return(0);
373		}
374
375		sc->mii_ticks = 0;
376		/*dcphy_reset(sc);*/
377		dcphy_auto(sc, 0);
378
379		break;
380	}
381
382	/* Update the media status. */
383	dcphy_status(sc);
384
385	/* Callback if something changed. */
386	if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) {
387		MIIBUS_STATCHG(sc->mii_dev);
388		sc->mii_active = mii->mii_media_active;
389	}
390	return (0);
391}
392
393void
394dcphy_status(sc)
395	struct mii_softc *sc;
396{
397	struct mii_data *mii = sc->mii_pdata;
398	int reg, anlpar;
399	struct dc_softc		*dc_sc;
400
401	dc_sc = mii->mii_ifp->if_softc;
402
403	mii->mii_media_status = IFM_AVALID;
404	mii->mii_media_active = IFM_ETHER;
405
406	reg = CSR_READ_4(dc_sc, DC_10BTSTAT) &
407	     (DC_TSTAT_LS10|DC_TSTAT_LS100);
408
409	if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
410		mii->mii_media_status |= IFM_ACTIVE;
411
412	if (sc->mii_flags & MIIF_DOINGAUTO) {
413		mii->mii_media_active |= IFM_NONE;
414		return;
415	}
416
417	if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL &&
418	    CSR_READ_4(dc_sc, DC_10BTSTAT) & DC_TSTAT_ANEGSTAT) {
419		/* Erg, still trying, I guess... */
420		if ((CSR_READ_4(dc_sc, DC_10BTSTAT) &
421		    DC_ASTAT_AUTONEGCMP) != DC_ASTAT_AUTONEGCMP) {
422			mii->mii_media_active |= IFM_NONE;
423			return;
424		}
425
426		if (CSR_READ_4(dc_sc, DC_10BTSTAT) & DC_TSTAT_LP_CAN_NWAY) {
427			anlpar = CSR_READ_4(dc_sc, DC_10BTSTAT) >> 16;
428			if (anlpar & ANLPAR_T4 &&
429			    sc->mii_capabilities & BMSR_100TXHDX)
430				mii->mii_media_active |= IFM_100_T4;
431			else if (anlpar & ANLPAR_TX_FD &&
432			    sc->mii_capabilities & BMSR_100TXHDX)
433				mii->mii_media_active |= IFM_100_TX|IFM_FDX;
434			else if (anlpar & ANLPAR_TX &&
435			    sc->mii_capabilities & BMSR_100TXHDX)
436				mii->mii_media_active |= IFM_100_TX;
437			else if (anlpar & ANLPAR_10_FD)
438				mii->mii_media_active |= IFM_10_T|IFM_FDX;
439			else if (anlpar & ANLPAR_10)
440				mii->mii_media_active |= IFM_10_T;
441			else
442				mii->mii_media_active |= IFM_NONE;
443			if (DC_IS_INTEL(dc_sc))
444				DC_CLRBIT(dc_sc, DC_10BTCTRL,
445				    DC_TCTL_AUTONEGENBL);
446			return;
447		}
448		/*
449		 * If the other side doesn't support NWAY, then the
450		 * best we can do is determine if we have a 10Mbps or
451		 * 100Mbps link. There's no way to know if the link
452		 * is full or half duplex, so we default to half duplex
453		 * and hope that the user is clever enough to manually
454		 * change the media settings if we're wrong.
455		 */
456		if (!(reg & DC_TSTAT_LS100))
457			mii->mii_media_active |= IFM_100_TX;
458		else if (!(reg & DC_TSTAT_LS10))
459			mii->mii_media_active |= IFM_10_T;
460		else
461			mii->mii_media_active |= IFM_NONE;
462		if (DC_IS_INTEL(dc_sc))
463			DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
464		return;
465	}
466
467	if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SCRAMBLER)
468		mii->mii_media_active |= IFM_100_TX;
469	else
470		mii->mii_media_active |= IFM_10_T;
471	if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX)
472		mii->mii_media_active |= IFM_FDX;
473
474	return;
475}
476
477static int
478dcphy_auto(mii, waitfor)
479	struct mii_softc	*mii;
480	int			waitfor;
481{
482	int			i;
483	struct dc_softc		*sc;
484
485	sc = mii->mii_pdata->mii_ifp->if_softc;
486
487	if ((mii->mii_flags & MIIF_DOINGAUTO) == 0) {
488		DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
489		DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
490		DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
491		if (mii->mii_capabilities & BMSR_100TXHDX)
492			CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF);
493		else
494			CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF);
495		DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
496		DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
497		DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE);
498	}
499
500	if (waitfor) {
501		/* Wait 500ms for it to complete. */
502		for (i = 0; i < 500; i++) {
503			if ((CSR_READ_4(sc, DC_10BTSTAT) & DC_TSTAT_ANEGSTAT)
504			    == DC_ASTAT_AUTONEGCMP)
505				return(0);
506			DELAY(1000);
507		}
508		/*
509		 * Don't need to worry about clearing MIIF_DOINGAUTO.
510		 * If that's set, a timeout is pending, and it will
511		 * clear the flag.
512		 */
513		return(EIO);
514	}
515
516	/*
517	 * Just let it finish asynchronously.  This is for the benefit of
518	 * the tick handler driving autonegotiation.  Don't want 500ms
519	 * delays all the time while the system is running!
520	 */
521	if ((mii->mii_flags & MIIF_DOINGAUTO) == 0)
522		mii->mii_flags |= MIIF_DOINGAUTO;
523
524	return(EJUSTRETURN);
525}
526
527static void
528dcphy_reset(mii)
529	struct mii_softc	*mii;
530{
531	struct dc_softc		*sc;
532
533	sc = mii->mii_pdata->mii_ifp->if_softc;
534
535	DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
536	DELAY(1000);
537	DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
538
539	return;
540}
541
542