1/*- 2 * Copyright (c) 2000 Takanori Watanabe <takawata@jp.freebsd.org> 3 * Copyright (c) 2000 Mitsuru IWASAKI <iwasaki@jp.freebsd.org> 4 * Copyright (c) 2000, 2001 Michael Smith 5 * Copyright (c) 2000 BSDi 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD: stable/10/sys/dev/acpica/acpi.c 306536 2016-09-30 22:40:58Z jkim $"); 32 33#include "opt_acpi.h" 34#include <sys/param.h> 35#include <sys/kernel.h> 36#include <sys/proc.h> 37#include <sys/fcntl.h> 38#include <sys/malloc.h> 39#include <sys/module.h> 40#include <sys/bus.h> 41#include <sys/conf.h> 42#include <sys/ioccom.h> 43#include <sys/reboot.h> 44#include <sys/sysctl.h> 45#include <sys/ctype.h> 46#include <sys/linker.h> 47#include <sys/power.h> 48#include <sys/sbuf.h> 49#include <sys/sched.h> 50#include <sys/smp.h> 51#include <sys/timetc.h> 52 53#if defined(__i386__) || defined(__amd64__) 54#include <machine/pci_cfgreg.h> 55#endif 56#include <machine/resource.h> 57#include <machine/bus.h> 58#include <sys/rman.h> 59#include <isa/isavar.h> 60#include <isa/pnpvar.h> 61 62#include <contrib/dev/acpica/include/acpi.h> 63#include <contrib/dev/acpica/include/accommon.h> 64#include <contrib/dev/acpica/include/acnamesp.h> 65 66#include <dev/acpica/acpivar.h> 67#include <dev/acpica/acpiio.h> 68 69#include <vm/vm_param.h> 70 71static MALLOC_DEFINE(M_ACPIDEV, "acpidev", "ACPI devices"); 72 73/* Hooks for the ACPI CA debugging infrastructure */ 74#define _COMPONENT ACPI_BUS 75ACPI_MODULE_NAME("ACPI") 76 77static d_open_t acpiopen; 78static d_close_t acpiclose; 79static d_ioctl_t acpiioctl; 80 81static struct cdevsw acpi_cdevsw = { 82 .d_version = D_VERSION, 83 .d_open = acpiopen, 84 .d_close = acpiclose, 85 .d_ioctl = acpiioctl, 86 .d_name = "acpi", 87}; 88 89struct acpi_interface { 90 ACPI_STRING *data; 91 int num; 92}; 93 94/* Global mutex for locking access to the ACPI subsystem. */ 95struct mtx acpi_mutex; 96 97/* Bitmap of device quirks. */ 98int acpi_quirks; 99 100/* Supported sleep states. */ 101static BOOLEAN acpi_sleep_states[ACPI_S_STATE_COUNT]; 102 103static void acpi_lookup(void *arg, const char *name, device_t *dev); 104static int acpi_modevent(struct module *mod, int event, void *junk); 105static int acpi_probe(device_t dev); 106static int acpi_attach(device_t dev); 107static int acpi_suspend(device_t dev); 108static int acpi_resume(device_t dev); 109static int acpi_shutdown(device_t dev); 110static device_t acpi_add_child(device_t bus, u_int order, const char *name, 111 int unit); 112static int acpi_print_child(device_t bus, device_t child); 113static void acpi_probe_nomatch(device_t bus, device_t child); 114static void acpi_driver_added(device_t dev, driver_t *driver); 115static int acpi_read_ivar(device_t dev, device_t child, int index, 116 uintptr_t *result); 117static int acpi_write_ivar(device_t dev, device_t child, int index, 118 uintptr_t value); 119static struct resource_list *acpi_get_rlist(device_t dev, device_t child); 120static void acpi_reserve_resources(device_t dev); 121static int acpi_sysres_alloc(device_t dev); 122static int acpi_set_resource(device_t dev, device_t child, int type, 123 int rid, u_long start, u_long count); 124static struct resource *acpi_alloc_resource(device_t bus, device_t child, 125 int type, int *rid, u_long start, u_long end, 126 u_long count, u_int flags); 127static int acpi_adjust_resource(device_t bus, device_t child, int type, 128 struct resource *r, u_long start, u_long end); 129static int acpi_release_resource(device_t bus, device_t child, int type, 130 int rid, struct resource *r); 131static void acpi_delete_resource(device_t bus, device_t child, int type, 132 int rid); 133static uint32_t acpi_isa_get_logicalid(device_t dev); 134static int acpi_isa_get_compatid(device_t dev, uint32_t *cids, int count); 135static char *acpi_device_id_probe(device_t bus, device_t dev, char **ids); 136static ACPI_STATUS acpi_device_eval_obj(device_t bus, device_t dev, 137 ACPI_STRING pathname, ACPI_OBJECT_LIST *parameters, 138 ACPI_BUFFER *ret); 139static ACPI_STATUS acpi_device_scan_cb(ACPI_HANDLE h, UINT32 level, 140 void *context, void **retval); 141static ACPI_STATUS acpi_device_scan_children(device_t bus, device_t dev, 142 int max_depth, acpi_scan_cb_t user_fn, void *arg); 143static int acpi_set_powerstate(device_t child, int state); 144static int acpi_isa_pnp_probe(device_t bus, device_t child, 145 struct isa_pnp_id *ids); 146static void acpi_probe_children(device_t bus); 147static void acpi_probe_order(ACPI_HANDLE handle, int *order); 148static ACPI_STATUS acpi_probe_child(ACPI_HANDLE handle, UINT32 level, 149 void *context, void **status); 150static void acpi_sleep_enable(void *arg); 151static ACPI_STATUS acpi_sleep_disable(struct acpi_softc *sc); 152static ACPI_STATUS acpi_EnterSleepState(struct acpi_softc *sc, int state); 153static void acpi_shutdown_final(void *arg, int howto); 154static void acpi_enable_fixed_events(struct acpi_softc *sc); 155static BOOLEAN acpi_has_hid(ACPI_HANDLE handle); 156static void acpi_resync_clock(struct acpi_softc *sc); 157static int acpi_wake_sleep_prep(ACPI_HANDLE handle, int sstate); 158static int acpi_wake_run_prep(ACPI_HANDLE handle, int sstate); 159static int acpi_wake_prep_walk(int sstate); 160static int acpi_wake_sysctl_walk(device_t dev); 161static int acpi_wake_set_sysctl(SYSCTL_HANDLER_ARGS); 162static void acpi_system_eventhandler_sleep(void *arg, int state); 163static void acpi_system_eventhandler_wakeup(void *arg, int state); 164static int acpi_sname2sstate(const char *sname); 165static const char *acpi_sstate2sname(int sstate); 166static int acpi_supported_sleep_state_sysctl(SYSCTL_HANDLER_ARGS); 167static int acpi_sleep_state_sysctl(SYSCTL_HANDLER_ARGS); 168static int acpi_debug_objects_sysctl(SYSCTL_HANDLER_ARGS); 169static int acpi_pm_func(u_long cmd, void *arg, ...); 170static int acpi_child_location_str_method(device_t acdev, device_t child, 171 char *buf, size_t buflen); 172static int acpi_child_pnpinfo_str_method(device_t acdev, device_t child, 173 char *buf, size_t buflen); 174#if defined(__i386__) || defined(__amd64__) 175static void acpi_enable_pcie(void); 176#endif 177static void acpi_hint_device_unit(device_t acdev, device_t child, 178 const char *name, int *unitp); 179static void acpi_reset_interfaces(device_t dev); 180 181static device_method_t acpi_methods[] = { 182 /* Device interface */ 183 DEVMETHOD(device_probe, acpi_probe), 184 DEVMETHOD(device_attach, acpi_attach), 185 DEVMETHOD(device_shutdown, acpi_shutdown), 186 DEVMETHOD(device_detach, bus_generic_detach), 187 DEVMETHOD(device_suspend, acpi_suspend), 188 DEVMETHOD(device_resume, acpi_resume), 189 190 /* Bus interface */ 191 DEVMETHOD(bus_add_child, acpi_add_child), 192 DEVMETHOD(bus_print_child, acpi_print_child), 193 DEVMETHOD(bus_probe_nomatch, acpi_probe_nomatch), 194 DEVMETHOD(bus_driver_added, acpi_driver_added), 195 DEVMETHOD(bus_read_ivar, acpi_read_ivar), 196 DEVMETHOD(bus_write_ivar, acpi_write_ivar), 197 DEVMETHOD(bus_get_resource_list, acpi_get_rlist), 198 DEVMETHOD(bus_set_resource, acpi_set_resource), 199 DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource), 200 DEVMETHOD(bus_alloc_resource, acpi_alloc_resource), 201 DEVMETHOD(bus_adjust_resource, acpi_adjust_resource), 202 DEVMETHOD(bus_release_resource, acpi_release_resource), 203 DEVMETHOD(bus_delete_resource, acpi_delete_resource), 204 DEVMETHOD(bus_child_pnpinfo_str, acpi_child_pnpinfo_str_method), 205 DEVMETHOD(bus_child_location_str, acpi_child_location_str_method), 206 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 207 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 208 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 209 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 210 DEVMETHOD(bus_hint_device_unit, acpi_hint_device_unit), 211 DEVMETHOD(bus_get_domain, acpi_get_domain), 212 213 /* ACPI bus */ 214 DEVMETHOD(acpi_id_probe, acpi_device_id_probe), 215 DEVMETHOD(acpi_evaluate_object, acpi_device_eval_obj), 216 DEVMETHOD(acpi_pwr_for_sleep, acpi_device_pwr_for_sleep), 217 DEVMETHOD(acpi_scan_children, acpi_device_scan_children), 218 219 /* ISA emulation */ 220 DEVMETHOD(isa_pnp_probe, acpi_isa_pnp_probe), 221 222 DEVMETHOD_END 223}; 224 225static driver_t acpi_driver = { 226 "acpi", 227 acpi_methods, 228 sizeof(struct acpi_softc), 229}; 230 231static devclass_t acpi_devclass; 232DRIVER_MODULE(acpi, nexus, acpi_driver, acpi_devclass, acpi_modevent, 0); 233MODULE_VERSION(acpi, 1); 234 235ACPI_SERIAL_DECL(acpi, "ACPI root bus"); 236 237/* Local pools for managing system resources for ACPI child devices. */ 238static struct rman acpi_rman_io, acpi_rman_mem; 239 240#define ACPI_MINIMUM_AWAKETIME 5 241 242/* Holds the description of the acpi0 device. */ 243static char acpi_desc[ACPI_OEM_ID_SIZE + ACPI_OEM_TABLE_ID_SIZE + 2]; 244 245SYSCTL_NODE(_debug, OID_AUTO, acpi, CTLFLAG_RD, NULL, "ACPI debugging"); 246static char acpi_ca_version[12]; 247SYSCTL_STRING(_debug_acpi, OID_AUTO, acpi_ca_version, CTLFLAG_RD, 248 acpi_ca_version, 0, "Version of Intel ACPI-CA"); 249 250/* 251 * Allow overriding _OSI methods. 252 */ 253static char acpi_install_interface[256]; 254TUNABLE_STR("hw.acpi.install_interface", acpi_install_interface, 255 sizeof(acpi_install_interface)); 256static char acpi_remove_interface[256]; 257TUNABLE_STR("hw.acpi.remove_interface", acpi_remove_interface, 258 sizeof(acpi_remove_interface)); 259 260/* Allow users to dump Debug objects without ACPI debugger. */ 261static int acpi_debug_objects; 262TUNABLE_INT("debug.acpi.enable_debug_objects", &acpi_debug_objects); 263SYSCTL_PROC(_debug_acpi, OID_AUTO, enable_debug_objects, 264 CTLFLAG_RW | CTLTYPE_INT, NULL, 0, acpi_debug_objects_sysctl, "I", 265 "Enable Debug objects"); 266 267/* Allow the interpreter to ignore common mistakes in BIOS. */ 268static int acpi_interpreter_slack = 1; 269TUNABLE_INT("debug.acpi.interpreter_slack", &acpi_interpreter_slack); 270SYSCTL_INT(_debug_acpi, OID_AUTO, interpreter_slack, CTLFLAG_RDTUN, 271 &acpi_interpreter_slack, 1, "Turn on interpreter slack mode."); 272 273/* Ignore register widths set by FADT and use default widths instead. */ 274static int acpi_ignore_reg_width = 1; 275TUNABLE_INT("debug.acpi.default_register_width", &acpi_ignore_reg_width); 276SYSCTL_INT(_debug_acpi, OID_AUTO, default_register_width, CTLFLAG_RDTUN, 277 &acpi_ignore_reg_width, 1, "Ignore register widths set by FADT"); 278 279#ifdef __amd64__ 280/* Reset system clock while resuming. XXX Remove once tested. */ 281static int acpi_reset_clock = 1; 282TUNABLE_INT("debug.acpi.reset_clock", &acpi_reset_clock); 283SYSCTL_INT(_debug_acpi, OID_AUTO, reset_clock, CTLFLAG_RW, 284 &acpi_reset_clock, 1, "Reset system clock while resuming."); 285#endif 286 287/* Allow users to override quirks. */ 288TUNABLE_INT("debug.acpi.quirks", &acpi_quirks); 289 290static int acpi_susp_bounce; 291SYSCTL_INT(_debug_acpi, OID_AUTO, suspend_bounce, CTLFLAG_RW, 292 &acpi_susp_bounce, 0, "Don't actually suspend, just test devices."); 293 294/* 295 * ACPI can only be loaded as a module by the loader; activating it after 296 * system bootstrap time is not useful, and can be fatal to the system. 297 * It also cannot be unloaded, since the entire system bus hierarchy hangs 298 * off it. 299 */ 300static int 301acpi_modevent(struct module *mod, int event, void *junk) 302{ 303 switch (event) { 304 case MOD_LOAD: 305 if (!cold) { 306 printf("The ACPI driver cannot be loaded after boot.\n"); 307 return (EPERM); 308 } 309 break; 310 case MOD_UNLOAD: 311 if (!cold && power_pm_get_type() == POWER_PM_TYPE_ACPI) 312 return (EBUSY); 313 break; 314 default: 315 break; 316 } 317 return (0); 318} 319 320/* 321 * Perform early initialization. 322 */ 323ACPI_STATUS 324acpi_Startup(void) 325{ 326 static int started = 0; 327 ACPI_STATUS status; 328 int val; 329 330 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 331 332 /* Only run the startup code once. The MADT driver also calls this. */ 333 if (started) 334 return_VALUE (AE_OK); 335 started = 1; 336 337 /* 338 * Pre-allocate space for RSDT/XSDT and DSDT tables and allow resizing 339 * if more tables exist. 340 */ 341 if (ACPI_FAILURE(status = AcpiInitializeTables(NULL, 2, TRUE))) { 342 printf("ACPI: Table initialisation failed: %s\n", 343 AcpiFormatException(status)); 344 return_VALUE (status); 345 } 346 347 /* Set up any quirks we have for this system. */ 348 if (acpi_quirks == ACPI_Q_OK) 349 acpi_table_quirks(&acpi_quirks); 350 351 /* If the user manually set the disabled hint to 0, force-enable ACPI. */ 352 if (resource_int_value("acpi", 0, "disabled", &val) == 0 && val == 0) 353 acpi_quirks &= ~ACPI_Q_BROKEN; 354 if (acpi_quirks & ACPI_Q_BROKEN) { 355 printf("ACPI disabled by blacklist. Contact your BIOS vendor.\n"); 356 status = AE_SUPPORT; 357 } 358 359 return_VALUE (status); 360} 361 362/* 363 * Detect ACPI and perform early initialisation. 364 */ 365int 366acpi_identify(void) 367{ 368 ACPI_TABLE_RSDP *rsdp; 369 ACPI_TABLE_HEADER *rsdt; 370 ACPI_PHYSICAL_ADDRESS paddr; 371 struct sbuf sb; 372 373 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 374 375 if (!cold) 376 return (ENXIO); 377 378 /* Check that we haven't been disabled with a hint. */ 379 if (resource_disabled("acpi", 0)) 380 return (ENXIO); 381 382 /* Check for other PM systems. */ 383 if (power_pm_get_type() != POWER_PM_TYPE_NONE && 384 power_pm_get_type() != POWER_PM_TYPE_ACPI) { 385 printf("ACPI identify failed, other PM system enabled.\n"); 386 return (ENXIO); 387 } 388 389 /* Initialize root tables. */ 390 if (ACPI_FAILURE(acpi_Startup())) { 391 printf("ACPI: Try disabling either ACPI or apic support.\n"); 392 return (ENXIO); 393 } 394 395 if ((paddr = AcpiOsGetRootPointer()) == 0 || 396 (rsdp = AcpiOsMapMemory(paddr, sizeof(ACPI_TABLE_RSDP))) == NULL) 397 return (ENXIO); 398 if (rsdp->Revision > 1 && rsdp->XsdtPhysicalAddress != 0) 399 paddr = (ACPI_PHYSICAL_ADDRESS)rsdp->XsdtPhysicalAddress; 400 else 401 paddr = (ACPI_PHYSICAL_ADDRESS)rsdp->RsdtPhysicalAddress; 402 AcpiOsUnmapMemory(rsdp, sizeof(ACPI_TABLE_RSDP)); 403 404 if ((rsdt = AcpiOsMapMemory(paddr, sizeof(ACPI_TABLE_HEADER))) == NULL) 405 return (ENXIO); 406 sbuf_new(&sb, acpi_desc, sizeof(acpi_desc), SBUF_FIXEDLEN); 407 sbuf_bcat(&sb, rsdt->OemId, ACPI_OEM_ID_SIZE); 408 sbuf_trim(&sb); 409 sbuf_putc(&sb, ' '); 410 sbuf_bcat(&sb, rsdt->OemTableId, ACPI_OEM_TABLE_ID_SIZE); 411 sbuf_trim(&sb); 412 sbuf_finish(&sb); 413 sbuf_delete(&sb); 414 AcpiOsUnmapMemory(rsdt, sizeof(ACPI_TABLE_HEADER)); 415 416 snprintf(acpi_ca_version, sizeof(acpi_ca_version), "%x", ACPI_CA_VERSION); 417 418 return (0); 419} 420 421/* 422 * Fetch some descriptive data from ACPI to put in our attach message. 423 */ 424static int 425acpi_probe(device_t dev) 426{ 427 428 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 429 430 device_set_desc(dev, acpi_desc); 431 432 return_VALUE (BUS_PROBE_NOWILDCARD); 433} 434 435static int 436acpi_attach(device_t dev) 437{ 438 struct acpi_softc *sc; 439 ACPI_STATUS status; 440 int error, state; 441 UINT32 flags; 442 UINT8 TypeA, TypeB; 443 char *env; 444 445 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 446 447 sc = device_get_softc(dev); 448 sc->acpi_dev = dev; 449 callout_init(&sc->susp_force_to, TRUE); 450 451 error = ENXIO; 452 453 /* Initialize resource manager. */ 454 acpi_rman_io.rm_type = RMAN_ARRAY; 455 acpi_rman_io.rm_start = 0; 456 acpi_rman_io.rm_end = 0xffff; 457 acpi_rman_io.rm_descr = "ACPI I/O ports"; 458 if (rman_init(&acpi_rman_io) != 0) 459 panic("acpi rman_init IO ports failed"); 460 acpi_rman_mem.rm_type = RMAN_ARRAY; 461 acpi_rman_mem.rm_start = 0; 462 acpi_rman_mem.rm_end = ~0ul; 463 acpi_rman_mem.rm_descr = "ACPI I/O memory addresses"; 464 if (rman_init(&acpi_rman_mem) != 0) 465 panic("acpi rman_init memory failed"); 466 467 /* Initialise the ACPI mutex */ 468 mtx_init(&acpi_mutex, "ACPI global lock", NULL, MTX_DEF); 469 470 /* 471 * Set the globals from our tunables. This is needed because ACPI-CA 472 * uses UINT8 for some values and we have no tunable_byte. 473 */ 474 AcpiGbl_EnableInterpreterSlack = acpi_interpreter_slack ? TRUE : FALSE; 475 AcpiGbl_EnableAmlDebugObject = acpi_debug_objects ? TRUE : FALSE; 476 AcpiGbl_UseDefaultRegisterWidths = acpi_ignore_reg_width ? TRUE : FALSE; 477 478#ifndef ACPI_DEBUG 479 /* 480 * Disable all debugging layers and levels. 481 */ 482 AcpiDbgLayer = 0; 483 AcpiDbgLevel = 0; 484#endif 485 486 /* Start up the ACPI CA subsystem. */ 487 status = AcpiInitializeSubsystem(); 488 if (ACPI_FAILURE(status)) { 489 device_printf(dev, "Could not initialize Subsystem: %s\n", 490 AcpiFormatException(status)); 491 goto out; 492 } 493 494 /* Override OS interfaces if the user requested. */ 495 acpi_reset_interfaces(dev); 496 497 /* Load ACPI name space. */ 498 status = AcpiLoadTables(); 499 if (ACPI_FAILURE(status)) { 500 device_printf(dev, "Could not load Namespace: %s\n", 501 AcpiFormatException(status)); 502 goto out; 503 } 504 505#if defined(__i386__) || defined(__amd64__) 506 /* Handle MCFG table if present. */ 507 acpi_enable_pcie(); 508#endif 509 510 /* 511 * Note that some systems (specifically, those with namespace evaluation 512 * issues that require the avoidance of parts of the namespace) must 513 * avoid running _INI and _STA on everything, as well as dodging the final 514 * object init pass. 515 * 516 * For these devices, we set ACPI_NO_DEVICE_INIT and ACPI_NO_OBJECT_INIT). 517 * 518 * XXX We should arrange for the object init pass after we have attached 519 * all our child devices, but on many systems it works here. 520 */ 521 flags = 0; 522 if (testenv("debug.acpi.avoid")) 523 flags = ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT; 524 525 /* Bring the hardware and basic handlers online. */ 526 if (ACPI_FAILURE(status = AcpiEnableSubsystem(flags))) { 527 device_printf(dev, "Could not enable ACPI: %s\n", 528 AcpiFormatException(status)); 529 goto out; 530 } 531 532 /* 533 * Call the ECDT probe function to provide EC functionality before 534 * the namespace has been evaluated. 535 * 536 * XXX This happens before the sysresource devices have been probed and 537 * attached so its resources come from nexus0. In practice, this isn't 538 * a problem but should be addressed eventually. 539 */ 540 acpi_ec_ecdt_probe(dev); 541 542 /* Bring device objects and regions online. */ 543 if (ACPI_FAILURE(status = AcpiInitializeObjects(flags))) { 544 device_printf(dev, "Could not initialize ACPI objects: %s\n", 545 AcpiFormatException(status)); 546 goto out; 547 } 548 549 /* 550 * Setup our sysctl tree. 551 * 552 * XXX: This doesn't check to make sure that none of these fail. 553 */ 554 sysctl_ctx_init(&sc->acpi_sysctl_ctx); 555 sc->acpi_sysctl_tree = SYSCTL_ADD_NODE(&sc->acpi_sysctl_ctx, 556 SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, 557 device_get_name(dev), CTLFLAG_RD, 0, ""); 558 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 559 OID_AUTO, "supported_sleep_state", CTLTYPE_STRING | CTLFLAG_RD, 560 0, 0, acpi_supported_sleep_state_sysctl, "A", ""); 561 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 562 OID_AUTO, "power_button_state", CTLTYPE_STRING | CTLFLAG_RW, 563 &sc->acpi_power_button_sx, 0, acpi_sleep_state_sysctl, "A", ""); 564 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 565 OID_AUTO, "sleep_button_state", CTLTYPE_STRING | CTLFLAG_RW, 566 &sc->acpi_sleep_button_sx, 0, acpi_sleep_state_sysctl, "A", ""); 567 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 568 OID_AUTO, "lid_switch_state", CTLTYPE_STRING | CTLFLAG_RW, 569 &sc->acpi_lid_switch_sx, 0, acpi_sleep_state_sysctl, "A", ""); 570 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 571 OID_AUTO, "standby_state", CTLTYPE_STRING | CTLFLAG_RW, 572 &sc->acpi_standby_sx, 0, acpi_sleep_state_sysctl, "A", ""); 573 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 574 OID_AUTO, "suspend_state", CTLTYPE_STRING | CTLFLAG_RW, 575 &sc->acpi_suspend_sx, 0, acpi_sleep_state_sysctl, "A", ""); 576 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 577 OID_AUTO, "sleep_delay", CTLFLAG_RW, &sc->acpi_sleep_delay, 0, 578 "sleep delay in seconds"); 579 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 580 OID_AUTO, "s4bios", CTLFLAG_RW, &sc->acpi_s4bios, 0, "S4BIOS mode"); 581 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 582 OID_AUTO, "verbose", CTLFLAG_RW, &sc->acpi_verbose, 0, "verbose mode"); 583 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 584 OID_AUTO, "disable_on_reboot", CTLFLAG_RW, 585 &sc->acpi_do_disable, 0, "Disable ACPI when rebooting/halting system"); 586 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 587 OID_AUTO, "handle_reboot", CTLFLAG_RW, 588 &sc->acpi_handle_reboot, 0, "Use ACPI Reset Register to reboot"); 589 590 /* 591 * Default to 1 second before sleeping to give some machines time to 592 * stabilize. 593 */ 594 sc->acpi_sleep_delay = 1; 595 if (bootverbose) 596 sc->acpi_verbose = 1; 597 if ((env = getenv("hw.acpi.verbose")) != NULL) { 598 if (strcmp(env, "0") != 0) 599 sc->acpi_verbose = 1; 600 freeenv(env); 601 } 602 603 /* Only enable reboot by default if the FADT says it is available. */ 604 if (AcpiGbl_FADT.Flags & ACPI_FADT_RESET_REGISTER) 605 sc->acpi_handle_reboot = 1; 606 607 /* Only enable S4BIOS by default if the FACS says it is available. */ 608 if (AcpiGbl_FACS->Flags & ACPI_FACS_S4_BIOS_PRESENT) 609 sc->acpi_s4bios = 1; 610 611 /* Probe all supported sleep states. */ 612 acpi_sleep_states[ACPI_STATE_S0] = TRUE; 613 for (state = ACPI_STATE_S1; state < ACPI_S_STATE_COUNT; state++) 614 if (ACPI_SUCCESS(AcpiEvaluateObject(ACPI_ROOT_OBJECT, 615 __DECONST(char *, AcpiGbl_SleepStateNames[state]), NULL, NULL)) && 616 ACPI_SUCCESS(AcpiGetSleepTypeData(state, &TypeA, &TypeB))) 617 acpi_sleep_states[state] = TRUE; 618 619 /* 620 * Dispatch the default sleep state to devices. The lid switch is set 621 * to UNKNOWN by default to avoid surprising users. 622 */ 623 sc->acpi_power_button_sx = acpi_sleep_states[ACPI_STATE_S5] ? 624 ACPI_STATE_S5 : ACPI_STATE_UNKNOWN; 625 sc->acpi_lid_switch_sx = ACPI_STATE_UNKNOWN; 626 sc->acpi_standby_sx = acpi_sleep_states[ACPI_STATE_S1] ? 627 ACPI_STATE_S1 : ACPI_STATE_UNKNOWN; 628 sc->acpi_suspend_sx = acpi_sleep_states[ACPI_STATE_S3] ? 629 ACPI_STATE_S3 : ACPI_STATE_UNKNOWN; 630 631 /* Pick the first valid sleep state for the sleep button default. */ 632 sc->acpi_sleep_button_sx = ACPI_STATE_UNKNOWN; 633 for (state = ACPI_STATE_S1; state <= ACPI_STATE_S4; state++) 634 if (acpi_sleep_states[state]) { 635 sc->acpi_sleep_button_sx = state; 636 break; 637 } 638 639 acpi_enable_fixed_events(sc); 640 641 /* 642 * Scan the namespace and attach/initialise children. 643 */ 644 645 /* Register our shutdown handler. */ 646 EVENTHANDLER_REGISTER(shutdown_final, acpi_shutdown_final, sc, 647 SHUTDOWN_PRI_LAST); 648 649 /* 650 * Register our acpi event handlers. 651 * XXX should be configurable eg. via userland policy manager. 652 */ 653 EVENTHANDLER_REGISTER(acpi_sleep_event, acpi_system_eventhandler_sleep, 654 sc, ACPI_EVENT_PRI_LAST); 655 EVENTHANDLER_REGISTER(acpi_wakeup_event, acpi_system_eventhandler_wakeup, 656 sc, ACPI_EVENT_PRI_LAST); 657 658 /* Flag our initial states. */ 659 sc->acpi_enabled = TRUE; 660 sc->acpi_sstate = ACPI_STATE_S0; 661 sc->acpi_sleep_disabled = TRUE; 662 663 /* Create the control device */ 664 sc->acpi_dev_t = make_dev(&acpi_cdevsw, 0, UID_ROOT, GID_WHEEL, 0644, 665 "acpi"); 666 sc->acpi_dev_t->si_drv1 = sc; 667 668 if ((error = acpi_machdep_init(dev))) 669 goto out; 670 671 /* Register ACPI again to pass the correct argument of pm_func. */ 672 power_pm_register(POWER_PM_TYPE_ACPI, acpi_pm_func, sc); 673 674 if (!acpi_disabled("bus")) { 675 EVENTHANDLER_REGISTER(dev_lookup, acpi_lookup, NULL, 1000); 676 acpi_probe_children(dev); 677 } 678 679 /* Update all GPEs and enable runtime GPEs. */ 680 status = AcpiUpdateAllGpes(); 681 if (ACPI_FAILURE(status)) 682 device_printf(dev, "Could not update all GPEs: %s\n", 683 AcpiFormatException(status)); 684 685 /* Allow sleep request after a while. */ 686 timeout(acpi_sleep_enable, sc, hz * ACPI_MINIMUM_AWAKETIME); 687 688 error = 0; 689 690 out: 691 return_VALUE (error); 692} 693 694static void 695acpi_set_power_children(device_t dev, int state) 696{ 697 device_t child, parent; 698 device_t *devlist; 699 struct pci_devinfo *dinfo; 700 int dstate, i, numdevs; 701 702 if (device_get_children(dev, &devlist, &numdevs) != 0) 703 return; 704 705 /* 706 * Retrieve and set D-state for the sleep state if _SxD is present. 707 * Skip children who aren't attached since they are handled separately. 708 */ 709 parent = device_get_parent(dev); 710 for (i = 0; i < numdevs; i++) { 711 child = devlist[i]; 712 dinfo = device_get_ivars(child); 713 dstate = state; 714 if (device_is_attached(child) && 715 acpi_device_pwr_for_sleep(parent, dev, &dstate) == 0) 716 acpi_set_powerstate(child, dstate); 717 } 718 free(devlist, M_TEMP); 719} 720 721static int 722acpi_suspend(device_t dev) 723{ 724 int error; 725 726 GIANT_REQUIRED; 727 728 error = bus_generic_suspend(dev); 729 if (error == 0) 730 acpi_set_power_children(dev, ACPI_STATE_D3); 731 732 return (error); 733} 734 735static int 736acpi_resume(device_t dev) 737{ 738 739 GIANT_REQUIRED; 740 741 acpi_set_power_children(dev, ACPI_STATE_D0); 742 743 return (bus_generic_resume(dev)); 744} 745 746static int 747acpi_shutdown(device_t dev) 748{ 749 750 GIANT_REQUIRED; 751 752 /* Allow children to shutdown first. */ 753 bus_generic_shutdown(dev); 754 755 /* 756 * Enable any GPEs that are able to power-on the system (i.e., RTC). 757 * Also, disable any that are not valid for this state (most). 758 */ 759 acpi_wake_prep_walk(ACPI_STATE_S5); 760 761 return (0); 762} 763 764/* 765 * Handle a new device being added 766 */ 767static device_t 768acpi_add_child(device_t bus, u_int order, const char *name, int unit) 769{ 770 struct acpi_device *ad; 771 device_t child; 772 773 if ((ad = malloc(sizeof(*ad), M_ACPIDEV, M_NOWAIT | M_ZERO)) == NULL) 774 return (NULL); 775 776 resource_list_init(&ad->ad_rl); 777 778 child = device_add_child_ordered(bus, order, name, unit); 779 if (child != NULL) 780 device_set_ivars(child, ad); 781 else 782 free(ad, M_ACPIDEV); 783 return (child); 784} 785 786static int 787acpi_print_child(device_t bus, device_t child) 788{ 789 struct acpi_device *adev = device_get_ivars(child); 790 struct resource_list *rl = &adev->ad_rl; 791 int retval = 0; 792 793 retval += bus_print_child_header(bus, child); 794 retval += resource_list_print_type(rl, "port", SYS_RES_IOPORT, "%#lx"); 795 retval += resource_list_print_type(rl, "iomem", SYS_RES_MEMORY, "%#lx"); 796 retval += resource_list_print_type(rl, "irq", SYS_RES_IRQ, "%ld"); 797 retval += resource_list_print_type(rl, "drq", SYS_RES_DRQ, "%ld"); 798 if (device_get_flags(child)) 799 retval += printf(" flags %#x", device_get_flags(child)); 800 retval += bus_print_child_domain(bus, child); 801 retval += bus_print_child_footer(bus, child); 802 803 return (retval); 804} 805 806/* 807 * If this device is an ACPI child but no one claimed it, attempt 808 * to power it off. We'll power it back up when a driver is added. 809 * 810 * XXX Disabled for now since many necessary devices (like fdc and 811 * ATA) don't claim the devices we created for them but still expect 812 * them to be powered up. 813 */ 814static void 815acpi_probe_nomatch(device_t bus, device_t child) 816{ 817#ifdef ACPI_ENABLE_POWERDOWN_NODRIVER 818 acpi_set_powerstate(child, ACPI_STATE_D3); 819#endif 820} 821 822/* 823 * If a new driver has a chance to probe a child, first power it up. 824 * 825 * XXX Disabled for now (see acpi_probe_nomatch for details). 826 */ 827static void 828acpi_driver_added(device_t dev, driver_t *driver) 829{ 830 device_t child, *devlist; 831 int i, numdevs; 832 833 DEVICE_IDENTIFY(driver, dev); 834 if (device_get_children(dev, &devlist, &numdevs)) 835 return; 836 for (i = 0; i < numdevs; i++) { 837 child = devlist[i]; 838 if (device_get_state(child) == DS_NOTPRESENT) { 839#ifdef ACPI_ENABLE_POWERDOWN_NODRIVER 840 acpi_set_powerstate(child, ACPI_STATE_D0); 841 if (device_probe_and_attach(child) != 0) 842 acpi_set_powerstate(child, ACPI_STATE_D3); 843#else 844 device_probe_and_attach(child); 845#endif 846 } 847 } 848 free(devlist, M_TEMP); 849} 850 851/* Location hint for devctl(8) */ 852static int 853acpi_child_location_str_method(device_t cbdev, device_t child, char *buf, 854 size_t buflen) 855{ 856 struct acpi_device *dinfo = device_get_ivars(child); 857 char buf2[32]; 858 int pxm; 859 860 if (dinfo->ad_handle) { 861 snprintf(buf, buflen, "handle=%s", acpi_name(dinfo->ad_handle)); 862 if (ACPI_SUCCESS(acpi_GetInteger(dinfo->ad_handle, "_PXM", &pxm))) { 863 snprintf(buf2, 32, " _PXM=%d", pxm); 864 strlcat(buf, buf2, buflen); 865 } 866 } else { 867 snprintf(buf, buflen, "unknown"); 868 } 869 return (0); 870} 871 872/* PnP information for devctl(8) */ 873static int 874acpi_child_pnpinfo_str_method(device_t cbdev, device_t child, char *buf, 875 size_t buflen) 876{ 877 struct acpi_device *dinfo = device_get_ivars(child); 878 ACPI_DEVICE_INFO *adinfo; 879 880 if (ACPI_FAILURE(AcpiGetObjectInfo(dinfo->ad_handle, &adinfo))) { 881 snprintf(buf, buflen, "unknown"); 882 return (0); 883 } 884 885 snprintf(buf, buflen, "_HID=%s _UID=%lu", 886 (adinfo->Valid & ACPI_VALID_HID) ? 887 adinfo->HardwareId.String : "none", 888 (adinfo->Valid & ACPI_VALID_UID) ? 889 strtoul(adinfo->UniqueId.String, NULL, 10) : 0UL); 890 AcpiOsFree(adinfo); 891 892 return (0); 893} 894 895/* 896 * Handle per-device ivars 897 */ 898static int 899acpi_read_ivar(device_t dev, device_t child, int index, uintptr_t *result) 900{ 901 struct acpi_device *ad; 902 903 if ((ad = device_get_ivars(child)) == NULL) { 904 device_printf(child, "device has no ivars\n"); 905 return (ENOENT); 906 } 907 908 /* ACPI and ISA compatibility ivars */ 909 switch(index) { 910 case ACPI_IVAR_HANDLE: 911 *(ACPI_HANDLE *)result = ad->ad_handle; 912 break; 913 case ACPI_IVAR_PRIVATE: 914 *(void **)result = ad->ad_private; 915 break; 916 case ACPI_IVAR_FLAGS: 917 *(int *)result = ad->ad_flags; 918 break; 919 case ISA_IVAR_VENDORID: 920 case ISA_IVAR_SERIAL: 921 case ISA_IVAR_COMPATID: 922 *(int *)result = -1; 923 break; 924 case ISA_IVAR_LOGICALID: 925 *(int *)result = acpi_isa_get_logicalid(child); 926 break; 927 default: 928 return (ENOENT); 929 } 930 931 return (0); 932} 933 934static int 935acpi_write_ivar(device_t dev, device_t child, int index, uintptr_t value) 936{ 937 struct acpi_device *ad; 938 939 if ((ad = device_get_ivars(child)) == NULL) { 940 device_printf(child, "device has no ivars\n"); 941 return (ENOENT); 942 } 943 944 switch(index) { 945 case ACPI_IVAR_HANDLE: 946 ad->ad_handle = (ACPI_HANDLE)value; 947 break; 948 case ACPI_IVAR_PRIVATE: 949 ad->ad_private = (void *)value; 950 break; 951 case ACPI_IVAR_FLAGS: 952 ad->ad_flags = (int)value; 953 break; 954 default: 955 panic("bad ivar write request (%d)", index); 956 return (ENOENT); 957 } 958 959 return (0); 960} 961 962/* 963 * Handle child resource allocation/removal 964 */ 965static struct resource_list * 966acpi_get_rlist(device_t dev, device_t child) 967{ 968 struct acpi_device *ad; 969 970 ad = device_get_ivars(child); 971 return (&ad->ad_rl); 972} 973 974static int 975acpi_match_resource_hint(device_t dev, int type, long value) 976{ 977 struct acpi_device *ad = device_get_ivars(dev); 978 struct resource_list *rl = &ad->ad_rl; 979 struct resource_list_entry *rle; 980 981 STAILQ_FOREACH(rle, rl, link) { 982 if (rle->type != type) 983 continue; 984 if (rle->start <= value && rle->end >= value) 985 return (1); 986 } 987 return (0); 988} 989 990/* 991 * Wire device unit numbers based on resource matches in hints. 992 */ 993static void 994acpi_hint_device_unit(device_t acdev, device_t child, const char *name, 995 int *unitp) 996{ 997 const char *s; 998 long value; 999 int line, matches, unit; 1000 1001 /* 1002 * Iterate over all the hints for the devices with the specified 1003 * name to see if one's resources are a subset of this device. 1004 */ 1005 line = 0; 1006 for (;;) { 1007 if (resource_find_dev(&line, name, &unit, "at", NULL) != 0) 1008 break; 1009 1010 /* Must have an "at" for acpi or isa. */ 1011 resource_string_value(name, unit, "at", &s); 1012 if (!(strcmp(s, "acpi0") == 0 || strcmp(s, "acpi") == 0 || 1013 strcmp(s, "isa0") == 0 || strcmp(s, "isa") == 0)) 1014 continue; 1015 1016 /* 1017 * Check for matching resources. We must have at least one match. 1018 * Since I/O and memory resources cannot be shared, if we get a 1019 * match on either of those, ignore any mismatches in IRQs or DRQs. 1020 * 1021 * XXX: We may want to revisit this to be more lenient and wire 1022 * as long as it gets one match. 1023 */ 1024 matches = 0; 1025 if (resource_long_value(name, unit, "port", &value) == 0) { 1026 /* 1027 * Floppy drive controllers are notorious for having a 1028 * wide variety of resources not all of which include the 1029 * first port that is specified by the hint (typically 1030 * 0x3f0) (see the comment above fdc_isa_alloc_resources() 1031 * in fdc_isa.c). However, they do all seem to include 1032 * port + 2 (e.g. 0x3f2) so for a floppy device, look for 1033 * 'value + 2' in the port resources instead of the hint 1034 * value. 1035 */ 1036 if (strcmp(name, "fdc") == 0) 1037 value += 2; 1038 if (acpi_match_resource_hint(child, SYS_RES_IOPORT, value)) 1039 matches++; 1040 else 1041 continue; 1042 } 1043 if (resource_long_value(name, unit, "maddr", &value) == 0) { 1044 if (acpi_match_resource_hint(child, SYS_RES_MEMORY, value)) 1045 matches++; 1046 else 1047 continue; 1048 } 1049 if (matches > 0) 1050 goto matched; 1051 if (resource_long_value(name, unit, "irq", &value) == 0) { 1052 if (acpi_match_resource_hint(child, SYS_RES_IRQ, value)) 1053 matches++; 1054 else 1055 continue; 1056 } 1057 if (resource_long_value(name, unit, "drq", &value) == 0) { 1058 if (acpi_match_resource_hint(child, SYS_RES_DRQ, value)) 1059 matches++; 1060 else 1061 continue; 1062 } 1063 1064 matched: 1065 if (matches > 0) { 1066 /* We have a winner! */ 1067 *unitp = unit; 1068 break; 1069 } 1070 } 1071} 1072 1073/* 1074 * Fech the NUMA domain for the given device. 1075 * 1076 * If a device has a _PXM method, map that to a NUMA domain. 1077 * 1078 * If none is found, then it'll call the parent method. 1079 * If there's no domain, return ENOENT. 1080 */ 1081int 1082acpi_get_domain(device_t dev, device_t child, int *domain) 1083{ 1084#if MAXMEMDOM > 1 1085 ACPI_HANDLE h; 1086 int d, pxm; 1087 1088 h = acpi_get_handle(child); 1089 if ((h != NULL) && 1090 ACPI_SUCCESS(acpi_GetInteger(h, "_PXM", &pxm))) { 1091 d = acpi_map_pxm_to_vm_domainid(pxm); 1092 if (d < 0) 1093 return (ENOENT); 1094 *domain = d; 1095 return (0); 1096 } 1097#endif 1098 /* No _PXM node; go up a level */ 1099 return (bus_generic_get_domain(dev, child, domain)); 1100} 1101 1102/* 1103 * Pre-allocate/manage all memory and IO resources. Since rman can't handle 1104 * duplicates, we merge any in the sysresource attach routine. 1105 */ 1106static int 1107acpi_sysres_alloc(device_t dev) 1108{ 1109 struct resource *res; 1110 struct resource_list *rl; 1111 struct resource_list_entry *rle; 1112 struct rman *rm; 1113 char *sysres_ids[] = { "PNP0C01", "PNP0C02", NULL }; 1114 device_t *children; 1115 int child_count, i; 1116 1117 /* 1118 * Probe/attach any sysresource devices. This would be unnecessary if we 1119 * had multi-pass probe/attach. 1120 */ 1121 if (device_get_children(dev, &children, &child_count) != 0) 1122 return (ENXIO); 1123 for (i = 0; i < child_count; i++) { 1124 if (ACPI_ID_PROBE(dev, children[i], sysres_ids) != NULL) 1125 device_probe_and_attach(children[i]); 1126 } 1127 free(children, M_TEMP); 1128 1129 rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev); 1130 STAILQ_FOREACH(rle, rl, link) { 1131 if (rle->res != NULL) { 1132 device_printf(dev, "duplicate resource for %lx\n", rle->start); 1133 continue; 1134 } 1135 1136 /* Only memory and IO resources are valid here. */ 1137 switch (rle->type) { 1138 case SYS_RES_IOPORT: 1139 rm = &acpi_rman_io; 1140 break; 1141 case SYS_RES_MEMORY: 1142 rm = &acpi_rman_mem; 1143 break; 1144 default: 1145 continue; 1146 } 1147 1148 /* Pre-allocate resource and add to our rman pool. */ 1149 res = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, rle->type, 1150 &rle->rid, rle->start, rle->start + rle->count - 1, rle->count, 0); 1151 if (res != NULL) { 1152 rman_manage_region(rm, rman_get_start(res), rman_get_end(res)); 1153 rle->res = res; 1154 } else if (bootverbose) 1155 device_printf(dev, "reservation of %lx, %lx (%d) failed\n", 1156 rle->start, rle->count, rle->type); 1157 } 1158 return (0); 1159} 1160 1161static char *pcilink_ids[] = { "PNP0C0F", NULL }; 1162static char *sysres_ids[] = { "PNP0C01", "PNP0C02", NULL }; 1163 1164/* 1165 * Reserve declared resources for devices found during attach once system 1166 * resources have been allocated. 1167 */ 1168static void 1169acpi_reserve_resources(device_t dev) 1170{ 1171 struct resource_list_entry *rle; 1172 struct resource_list *rl; 1173 struct acpi_device *ad; 1174 struct acpi_softc *sc; 1175 device_t *children; 1176 int child_count, i; 1177 1178 sc = device_get_softc(dev); 1179 if (device_get_children(dev, &children, &child_count) != 0) 1180 return; 1181 for (i = 0; i < child_count; i++) { 1182 ad = device_get_ivars(children[i]); 1183 rl = &ad->ad_rl; 1184 1185 /* Don't reserve system resources. */ 1186 if (ACPI_ID_PROBE(dev, children[i], sysres_ids) != NULL) 1187 continue; 1188 1189 STAILQ_FOREACH(rle, rl, link) { 1190 /* 1191 * Don't reserve IRQ resources. There are many sticky things 1192 * to get right otherwise (e.g. IRQs for psm, atkbd, and HPET 1193 * when using legacy routing). 1194 */ 1195 if (rle->type == SYS_RES_IRQ) 1196 continue; 1197 1198 /* 1199 * Don't reserve the resource if it is already allocated. 1200 * The acpi_ec(4) driver can allocate its resources early 1201 * if ECDT is present. 1202 */ 1203 if (rle->res != NULL) 1204 continue; 1205 1206 /* 1207 * Try to reserve the resource from our parent. If this 1208 * fails because the resource is a system resource, just 1209 * let it be. The resource range is already reserved so 1210 * that other devices will not use it. If the driver 1211 * needs to allocate the resource, then 1212 * acpi_alloc_resource() will sub-alloc from the system 1213 * resource. 1214 */ 1215 resource_list_reserve(rl, dev, children[i], rle->type, &rle->rid, 1216 rle->start, rle->end, rle->count, 0); 1217 } 1218 } 1219 free(children, M_TEMP); 1220 sc->acpi_resources_reserved = 1; 1221} 1222 1223static int 1224acpi_set_resource(device_t dev, device_t child, int type, int rid, 1225 u_long start, u_long count) 1226{ 1227 struct acpi_softc *sc = device_get_softc(dev); 1228 struct acpi_device *ad = device_get_ivars(child); 1229 struct resource_list *rl = &ad->ad_rl; 1230 ACPI_DEVICE_INFO *devinfo; 1231 u_long end; 1232 1233 /* Ignore IRQ resources for PCI link devices. */ 1234 if (type == SYS_RES_IRQ && ACPI_ID_PROBE(dev, child, pcilink_ids) != NULL) 1235 return (0); 1236 1237 /* 1238 * Ignore most resources for PCI root bridges. Some BIOSes 1239 * incorrectly enumerate the memory ranges they decode as plain 1240 * memory resources instead of as ResourceProducer ranges. Other 1241 * BIOSes incorrectly list system resource entries for I/O ranges 1242 * under the PCI bridge. Do allow the one known-correct case on 1243 * x86 of a PCI bridge claiming the I/O ports used for PCI config 1244 * access. 1245 */ 1246 if (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT) { 1247 if (ACPI_SUCCESS(AcpiGetObjectInfo(ad->ad_handle, &devinfo))) { 1248 if ((devinfo->Flags & ACPI_PCI_ROOT_BRIDGE) != 0) { 1249#if defined(__i386__) || defined(__amd64__) 1250 if (!(type == SYS_RES_IOPORT && start == CONF1_ADDR_PORT)) 1251#endif 1252 { 1253 AcpiOsFree(devinfo); 1254 return (0); 1255 } 1256 } 1257 AcpiOsFree(devinfo); 1258 } 1259 } 1260 1261 /* If the resource is already allocated, fail. */ 1262 if (resource_list_busy(rl, type, rid)) 1263 return (EBUSY); 1264 1265 /* If the resource is already reserved, release it. */ 1266 if (resource_list_reserved(rl, type, rid)) 1267 resource_list_unreserve(rl, dev, child, type, rid); 1268 1269 /* Add the resource. */ 1270 end = (start + count - 1); 1271 resource_list_add(rl, type, rid, start, end, count); 1272 1273 /* Don't reserve resources until the system resources are allocated. */ 1274 if (!sc->acpi_resources_reserved) 1275 return (0); 1276 1277 /* Don't reserve system resources. */ 1278 if (ACPI_ID_PROBE(dev, child, sysres_ids) != NULL) 1279 return (0); 1280 1281 /* 1282 * Don't reserve IRQ resources. There are many sticky things to 1283 * get right otherwise (e.g. IRQs for psm, atkbd, and HPET when 1284 * using legacy routing). 1285 */ 1286 if (type == SYS_RES_IRQ) 1287 return (0); 1288 1289 /* 1290 * Reserve the resource. 1291 * 1292 * XXX: Ignores failure for now. Failure here is probably a 1293 * BIOS/firmware bug? 1294 */ 1295 resource_list_reserve(rl, dev, child, type, &rid, start, end, count, 0); 1296 return (0); 1297} 1298 1299static struct resource * 1300acpi_alloc_resource(device_t bus, device_t child, int type, int *rid, 1301 u_long start, u_long end, u_long count, u_int flags) 1302{ 1303 ACPI_RESOURCE ares; 1304 struct acpi_device *ad; 1305 struct resource_list_entry *rle; 1306 struct resource_list *rl; 1307 struct resource *res; 1308 int isdefault = (start == 0UL && end == ~0UL); 1309 1310 /* 1311 * First attempt at allocating the resource. For direct children, 1312 * use resource_list_alloc() to handle reserved resources. For 1313 * other devices, pass the request up to our parent. 1314 */ 1315 if (bus == device_get_parent(child)) { 1316 ad = device_get_ivars(child); 1317 rl = &ad->ad_rl; 1318 1319 /* 1320 * Simulate the behavior of the ISA bus for direct children 1321 * devices. That is, if a non-default range is specified for 1322 * a resource that doesn't exist, use bus_set_resource() to 1323 * add the resource before allocating it. Note that these 1324 * resources will not be reserved. 1325 */ 1326 if (!isdefault && resource_list_find(rl, type, *rid) == NULL) 1327 resource_list_add(rl, type, *rid, start, end, count); 1328 res = resource_list_alloc(rl, bus, child, type, rid, start, end, count, 1329 flags); 1330 if (res != NULL && type == SYS_RES_IRQ) { 1331 /* 1332 * Since bus_config_intr() takes immediate effect, we cannot 1333 * configure the interrupt associated with a device when we 1334 * parse the resources but have to defer it until a driver 1335 * actually allocates the interrupt via bus_alloc_resource(). 1336 * 1337 * XXX: Should we handle the lookup failing? 1338 */ 1339 if (ACPI_SUCCESS(acpi_lookup_irq_resource(child, *rid, res, &ares))) 1340 acpi_config_intr(child, &ares); 1341 } 1342 1343 /* 1344 * If this is an allocation of the "default" range for a given 1345 * RID, fetch the exact bounds for this resource from the 1346 * resource list entry to try to allocate the range from the 1347 * system resource regions. 1348 */ 1349 if (res == NULL && isdefault) { 1350 rle = resource_list_find(rl, type, *rid); 1351 if (rle != NULL) { 1352 start = rle->start; 1353 end = rle->end; 1354 count = rle->count; 1355 } 1356 } 1357 } else 1358 res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, 1359 start, end, count, flags); 1360 1361 /* 1362 * If the first attempt failed and this is an allocation of a 1363 * specific range, try to satisfy the request via a suballocation 1364 * from our system resource regions. 1365 */ 1366 if (res == NULL && start + count - 1 == end) 1367 res = acpi_alloc_sysres(child, type, rid, start, end, count, flags); 1368 return (res); 1369} 1370 1371/* 1372 * Attempt to allocate a specific resource range from the system 1373 * resource ranges. Note that we only handle memory and I/O port 1374 * system resources. 1375 */ 1376struct resource * 1377acpi_alloc_sysres(device_t child, int type, int *rid, u_long start, u_long end, 1378 u_long count, u_int flags) 1379{ 1380 struct rman *rm; 1381 struct resource *res; 1382 1383 switch (type) { 1384 case SYS_RES_IOPORT: 1385 rm = &acpi_rman_io; 1386 break; 1387 case SYS_RES_MEMORY: 1388 rm = &acpi_rman_mem; 1389 break; 1390 default: 1391 return (NULL); 1392 } 1393 1394 KASSERT(start + count - 1 == end, ("wildcard resource range")); 1395 res = rman_reserve_resource(rm, start, end, count, flags & ~RF_ACTIVE, 1396 child); 1397 if (res == NULL) 1398 return (NULL); 1399 1400 rman_set_rid(res, *rid); 1401 1402 /* If requested, activate the resource using the parent's method. */ 1403 if (flags & RF_ACTIVE) 1404 if (bus_activate_resource(child, type, *rid, res) != 0) { 1405 rman_release_resource(res); 1406 return (NULL); 1407 } 1408 1409 return (res); 1410} 1411 1412static int 1413acpi_is_resource_managed(int type, struct resource *r) 1414{ 1415 1416 /* We only handle memory and IO resources through rman. */ 1417 switch (type) { 1418 case SYS_RES_IOPORT: 1419 return (rman_is_region_manager(r, &acpi_rman_io)); 1420 case SYS_RES_MEMORY: 1421 return (rman_is_region_manager(r, &acpi_rman_mem)); 1422 } 1423 return (0); 1424} 1425 1426static int 1427acpi_adjust_resource(device_t bus, device_t child, int type, struct resource *r, 1428 u_long start, u_long end) 1429{ 1430 1431 if (acpi_is_resource_managed(type, r)) 1432 return (rman_adjust_resource(r, start, end)); 1433 return (bus_generic_adjust_resource(bus, child, type, r, start, end)); 1434} 1435 1436static int 1437acpi_release_resource(device_t bus, device_t child, int type, int rid, 1438 struct resource *r) 1439{ 1440 int ret; 1441 1442 /* 1443 * If this resource belongs to one of our internal managers, 1444 * deactivate it and release it to the local pool. 1445 */ 1446 if (acpi_is_resource_managed(type, r)) { 1447 if (rman_get_flags(r) & RF_ACTIVE) { 1448 ret = bus_deactivate_resource(child, type, rid, r); 1449 if (ret != 0) 1450 return (ret); 1451 } 1452 return (rman_release_resource(r)); 1453 } 1454 1455 return (bus_generic_rl_release_resource(bus, child, type, rid, r)); 1456} 1457 1458static void 1459acpi_delete_resource(device_t bus, device_t child, int type, int rid) 1460{ 1461 struct resource_list *rl; 1462 1463 rl = acpi_get_rlist(bus, child); 1464 if (resource_list_busy(rl, type, rid)) { 1465 device_printf(bus, "delete_resource: Resource still owned by child" 1466 " (type=%d, rid=%d)\n", type, rid); 1467 return; 1468 } 1469 resource_list_unreserve(rl, bus, child, type, rid); 1470 resource_list_delete(rl, type, rid); 1471} 1472 1473/* Allocate an IO port or memory resource, given its GAS. */ 1474int 1475acpi_bus_alloc_gas(device_t dev, int *type, int *rid, ACPI_GENERIC_ADDRESS *gas, 1476 struct resource **res, u_int flags) 1477{ 1478 int error, res_type; 1479 1480 error = ENOMEM; 1481 if (type == NULL || rid == NULL || gas == NULL || res == NULL) 1482 return (EINVAL); 1483 1484 /* We only support memory and IO spaces. */ 1485 switch (gas->SpaceId) { 1486 case ACPI_ADR_SPACE_SYSTEM_MEMORY: 1487 res_type = SYS_RES_MEMORY; 1488 break; 1489 case ACPI_ADR_SPACE_SYSTEM_IO: 1490 res_type = SYS_RES_IOPORT; 1491 break; 1492 default: 1493 return (EOPNOTSUPP); 1494 } 1495 1496 /* 1497 * If the register width is less than 8, assume the BIOS author means 1498 * it is a bit field and just allocate a byte. 1499 */ 1500 if (gas->BitWidth && gas->BitWidth < 8) 1501 gas->BitWidth = 8; 1502 1503 /* Validate the address after we're sure we support the space. */ 1504 if (gas->Address == 0 || gas->BitWidth == 0) 1505 return (EINVAL); 1506 1507 bus_set_resource(dev, res_type, *rid, gas->Address, 1508 gas->BitWidth / 8); 1509 *res = bus_alloc_resource_any(dev, res_type, rid, RF_ACTIVE | flags); 1510 if (*res != NULL) { 1511 *type = res_type; 1512 error = 0; 1513 } else 1514 bus_delete_resource(dev, res_type, *rid); 1515 1516 return (error); 1517} 1518 1519/* Probe _HID and _CID for compatible ISA PNP ids. */ 1520static uint32_t 1521acpi_isa_get_logicalid(device_t dev) 1522{ 1523 ACPI_DEVICE_INFO *devinfo; 1524 ACPI_HANDLE h; 1525 uint32_t pnpid; 1526 1527 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1528 1529 /* Fetch and validate the HID. */ 1530 if ((h = acpi_get_handle(dev)) == NULL || 1531 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 1532 return_VALUE (0); 1533 1534 pnpid = (devinfo->Valid & ACPI_VALID_HID) != 0 && 1535 devinfo->HardwareId.Length >= ACPI_EISAID_STRING_SIZE ? 1536 PNP_EISAID(devinfo->HardwareId.String) : 0; 1537 AcpiOsFree(devinfo); 1538 1539 return_VALUE (pnpid); 1540} 1541 1542static int 1543acpi_isa_get_compatid(device_t dev, uint32_t *cids, int count) 1544{ 1545 ACPI_DEVICE_INFO *devinfo; 1546 ACPI_PNP_DEVICE_ID *ids; 1547 ACPI_HANDLE h; 1548 uint32_t *pnpid; 1549 int i, valid; 1550 1551 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1552 1553 pnpid = cids; 1554 1555 /* Fetch and validate the CID */ 1556 if ((h = acpi_get_handle(dev)) == NULL || 1557 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 1558 return_VALUE (0); 1559 1560 if ((devinfo->Valid & ACPI_VALID_CID) == 0) { 1561 AcpiOsFree(devinfo); 1562 return_VALUE (0); 1563 } 1564 1565 if (devinfo->CompatibleIdList.Count < count) 1566 count = devinfo->CompatibleIdList.Count; 1567 ids = devinfo->CompatibleIdList.Ids; 1568 for (i = 0, valid = 0; i < count; i++) 1569 if (ids[i].Length >= ACPI_EISAID_STRING_SIZE && 1570 strncmp(ids[i].String, "PNP", 3) == 0) { 1571 *pnpid++ = PNP_EISAID(ids[i].String); 1572 valid++; 1573 } 1574 AcpiOsFree(devinfo); 1575 1576 return_VALUE (valid); 1577} 1578 1579static char * 1580acpi_device_id_probe(device_t bus, device_t dev, char **ids) 1581{ 1582 ACPI_HANDLE h; 1583 ACPI_OBJECT_TYPE t; 1584 int i; 1585 1586 h = acpi_get_handle(dev); 1587 if (ids == NULL || h == NULL) 1588 return (NULL); 1589 t = acpi_get_type(dev); 1590 if (t != ACPI_TYPE_DEVICE && t != ACPI_TYPE_PROCESSOR) 1591 return (NULL); 1592 1593 /* Try to match one of the array of IDs with a HID or CID. */ 1594 for (i = 0; ids[i] != NULL; i++) { 1595 if (acpi_MatchHid(h, ids[i])) 1596 return (ids[i]); 1597 } 1598 return (NULL); 1599} 1600 1601static ACPI_STATUS 1602acpi_device_eval_obj(device_t bus, device_t dev, ACPI_STRING pathname, 1603 ACPI_OBJECT_LIST *parameters, ACPI_BUFFER *ret) 1604{ 1605 ACPI_HANDLE h; 1606 1607 if (dev == NULL) 1608 h = ACPI_ROOT_OBJECT; 1609 else if ((h = acpi_get_handle(dev)) == NULL) 1610 return (AE_BAD_PARAMETER); 1611 return (AcpiEvaluateObject(h, pathname, parameters, ret)); 1612} 1613 1614int 1615acpi_device_pwr_for_sleep(device_t bus, device_t dev, int *dstate) 1616{ 1617 struct acpi_softc *sc; 1618 ACPI_HANDLE handle; 1619 ACPI_STATUS status; 1620 char sxd[8]; 1621 1622 handle = acpi_get_handle(dev); 1623 1624 /* 1625 * XXX If we find these devices, don't try to power them down. 1626 * The serial and IRDA ports on my T23 hang the system when 1627 * set to D3 and it appears that such legacy devices may 1628 * need special handling in their drivers. 1629 */ 1630 if (dstate == NULL || handle == NULL || 1631 acpi_MatchHid(handle, "PNP0500") || 1632 acpi_MatchHid(handle, "PNP0501") || 1633 acpi_MatchHid(handle, "PNP0502") || 1634 acpi_MatchHid(handle, "PNP0510") || 1635 acpi_MatchHid(handle, "PNP0511")) 1636 return (ENXIO); 1637 1638 /* 1639 * Override next state with the value from _SxD, if present. 1640 * Note illegal _S0D is evaluated because some systems expect this. 1641 */ 1642 sc = device_get_softc(bus); 1643 snprintf(sxd, sizeof(sxd), "_S%dD", sc->acpi_sstate); 1644 status = acpi_GetInteger(handle, sxd, dstate); 1645 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { 1646 device_printf(dev, "failed to get %s on %s: %s\n", sxd, 1647 acpi_name(handle), AcpiFormatException(status)); 1648 return (ENXIO); 1649 } 1650 1651 return (0); 1652} 1653 1654/* Callback arg for our implementation of walking the namespace. */ 1655struct acpi_device_scan_ctx { 1656 acpi_scan_cb_t user_fn; 1657 void *arg; 1658 ACPI_HANDLE parent; 1659}; 1660 1661static ACPI_STATUS 1662acpi_device_scan_cb(ACPI_HANDLE h, UINT32 level, void *arg, void **retval) 1663{ 1664 struct acpi_device_scan_ctx *ctx; 1665 device_t dev, old_dev; 1666 ACPI_STATUS status; 1667 ACPI_OBJECT_TYPE type; 1668 1669 /* 1670 * Skip this device if we think we'll have trouble with it or it is 1671 * the parent where the scan began. 1672 */ 1673 ctx = (struct acpi_device_scan_ctx *)arg; 1674 if (acpi_avoid(h) || h == ctx->parent) 1675 return (AE_OK); 1676 1677 /* If this is not a valid device type (e.g., a method), skip it. */ 1678 if (ACPI_FAILURE(AcpiGetType(h, &type))) 1679 return (AE_OK); 1680 if (type != ACPI_TYPE_DEVICE && type != ACPI_TYPE_PROCESSOR && 1681 type != ACPI_TYPE_THERMAL && type != ACPI_TYPE_POWER) 1682 return (AE_OK); 1683 1684 /* 1685 * Call the user function with the current device. If it is unchanged 1686 * afterwards, return. Otherwise, we update the handle to the new dev. 1687 */ 1688 old_dev = acpi_get_device(h); 1689 dev = old_dev; 1690 status = ctx->user_fn(h, &dev, level, ctx->arg); 1691 if (ACPI_FAILURE(status) || old_dev == dev) 1692 return (status); 1693 1694 /* Remove the old child and its connection to the handle. */ 1695 if (old_dev != NULL) { 1696 device_delete_child(device_get_parent(old_dev), old_dev); 1697 AcpiDetachData(h, acpi_fake_objhandler); 1698 } 1699 1700 /* Recreate the handle association if the user created a device. */ 1701 if (dev != NULL) 1702 AcpiAttachData(h, acpi_fake_objhandler, dev); 1703 1704 return (AE_OK); 1705} 1706 1707static ACPI_STATUS 1708acpi_device_scan_children(device_t bus, device_t dev, int max_depth, 1709 acpi_scan_cb_t user_fn, void *arg) 1710{ 1711 ACPI_HANDLE h; 1712 struct acpi_device_scan_ctx ctx; 1713 1714 if (acpi_disabled("children")) 1715 return (AE_OK); 1716 1717 if (dev == NULL) 1718 h = ACPI_ROOT_OBJECT; 1719 else if ((h = acpi_get_handle(dev)) == NULL) 1720 return (AE_BAD_PARAMETER); 1721 ctx.user_fn = user_fn; 1722 ctx.arg = arg; 1723 ctx.parent = h; 1724 return (AcpiWalkNamespace(ACPI_TYPE_ANY, h, max_depth, 1725 acpi_device_scan_cb, NULL, &ctx, NULL)); 1726} 1727 1728/* 1729 * Even though ACPI devices are not PCI, we use the PCI approach for setting 1730 * device power states since it's close enough to ACPI. 1731 */ 1732static int 1733acpi_set_powerstate(device_t child, int state) 1734{ 1735 ACPI_HANDLE h; 1736 ACPI_STATUS status; 1737 1738 h = acpi_get_handle(child); 1739 if (state < ACPI_STATE_D0 || state > ACPI_D_STATES_MAX) 1740 return (EINVAL); 1741 if (h == NULL) 1742 return (0); 1743 1744 /* Ignore errors if the power methods aren't present. */ 1745 status = acpi_pwr_switch_consumer(h, state); 1746 if (ACPI_SUCCESS(status)) { 1747 if (bootverbose) 1748 device_printf(child, "set ACPI power state D%d on %s\n", 1749 state, acpi_name(h)); 1750 } else if (status != AE_NOT_FOUND) 1751 device_printf(child, 1752 "failed to set ACPI power state D%d on %s: %s\n", state, 1753 acpi_name(h), AcpiFormatException(status)); 1754 1755 return (0); 1756} 1757 1758static int 1759acpi_isa_pnp_probe(device_t bus, device_t child, struct isa_pnp_id *ids) 1760{ 1761 int result, cid_count, i; 1762 uint32_t lid, cids[8]; 1763 1764 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1765 1766 /* 1767 * ISA-style drivers attached to ACPI may persist and 1768 * probe manually if we return ENOENT. We never want 1769 * that to happen, so don't ever return it. 1770 */ 1771 result = ENXIO; 1772 1773 /* Scan the supplied IDs for a match */ 1774 lid = acpi_isa_get_logicalid(child); 1775 cid_count = acpi_isa_get_compatid(child, cids, 8); 1776 while (ids && ids->ip_id) { 1777 if (lid == ids->ip_id) { 1778 result = 0; 1779 goto out; 1780 } 1781 for (i = 0; i < cid_count; i++) { 1782 if (cids[i] == ids->ip_id) { 1783 result = 0; 1784 goto out; 1785 } 1786 } 1787 ids++; 1788 } 1789 1790 out: 1791 if (result == 0 && ids->ip_desc) 1792 device_set_desc(child, ids->ip_desc); 1793 1794 return_VALUE (result); 1795} 1796 1797#if defined(__i386__) || defined(__amd64__) 1798/* 1799 * Look for a MCFG table. If it is present, use the settings for 1800 * domain (segment) 0 to setup PCI config space access via the memory 1801 * map. 1802 */ 1803static void 1804acpi_enable_pcie(void) 1805{ 1806 ACPI_TABLE_HEADER *hdr; 1807 ACPI_MCFG_ALLOCATION *alloc, *end; 1808 ACPI_STATUS status; 1809 1810 status = AcpiGetTable(ACPI_SIG_MCFG, 1, &hdr); 1811 if (ACPI_FAILURE(status)) 1812 return; 1813 1814 end = (ACPI_MCFG_ALLOCATION *)((char *)hdr + hdr->Length); 1815 alloc = (ACPI_MCFG_ALLOCATION *)((ACPI_TABLE_MCFG *)hdr + 1); 1816 while (alloc < end) { 1817 if (alloc->PciSegment == 0) { 1818 pcie_cfgregopen(alloc->Address, alloc->StartBusNumber, 1819 alloc->EndBusNumber); 1820 return; 1821 } 1822 alloc++; 1823 } 1824} 1825#endif 1826 1827/* 1828 * Scan all of the ACPI namespace and attach child devices. 1829 * 1830 * We should only expect to find devices in the \_PR, \_TZ, \_SI, and 1831 * \_SB scopes, and \_PR and \_TZ became obsolete in the ACPI 2.0 spec. 1832 * However, in violation of the spec, some systems place their PCI link 1833 * devices in \, so we have to walk the whole namespace. We check the 1834 * type of namespace nodes, so this should be ok. 1835 */ 1836static void 1837acpi_probe_children(device_t bus) 1838{ 1839 1840 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1841 1842 /* 1843 * Scan the namespace and insert placeholders for all the devices that 1844 * we find. We also probe/attach any early devices. 1845 * 1846 * Note that we use AcpiWalkNamespace rather than AcpiGetDevices because 1847 * we want to create nodes for all devices, not just those that are 1848 * currently present. (This assumes that we don't want to create/remove 1849 * devices as they appear, which might be smarter.) 1850 */ 1851 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "namespace scan\n")); 1852 AcpiWalkNamespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, 100, acpi_probe_child, 1853 NULL, bus, NULL); 1854 1855 /* Pre-allocate resources for our rman from any sysresource devices. */ 1856 acpi_sysres_alloc(bus); 1857 1858 /* Reserve resources already allocated to children. */ 1859 acpi_reserve_resources(bus); 1860 1861 /* Create any static children by calling device identify methods. */ 1862 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "device identify routines\n")); 1863 bus_generic_probe(bus); 1864 1865 /* Probe/attach all children, created statically and from the namespace. */ 1866 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "acpi bus_generic_attach\n")); 1867 bus_generic_attach(bus); 1868 1869 /* Attach wake sysctls. */ 1870 acpi_wake_sysctl_walk(bus); 1871 1872 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "done attaching children\n")); 1873 return_VOID; 1874} 1875 1876/* 1877 * Determine the probe order for a given device. 1878 */ 1879static void 1880acpi_probe_order(ACPI_HANDLE handle, int *order) 1881{ 1882 ACPI_OBJECT_TYPE type; 1883 1884 /* 1885 * 0. CPUs 1886 * 1. I/O port and memory system resource holders 1887 * 2. Clocks and timers (to handle early accesses) 1888 * 3. Embedded controllers (to handle early accesses) 1889 * 4. PCI Link Devices 1890 */ 1891 AcpiGetType(handle, &type); 1892 if (type == ACPI_TYPE_PROCESSOR) 1893 *order = 0; 1894 else if (acpi_MatchHid(handle, "PNP0C01") || 1895 acpi_MatchHid(handle, "PNP0C02")) 1896 *order = 1; 1897 else if (acpi_MatchHid(handle, "PNP0100") || 1898 acpi_MatchHid(handle, "PNP0103") || 1899 acpi_MatchHid(handle, "PNP0B00")) 1900 *order = 2; 1901 else if (acpi_MatchHid(handle, "PNP0C09")) 1902 *order = 3; 1903 else if (acpi_MatchHid(handle, "PNP0C0F")) 1904 *order = 4; 1905} 1906 1907/* 1908 * Evaluate a child device and determine whether we might attach a device to 1909 * it. 1910 */ 1911static ACPI_STATUS 1912acpi_probe_child(ACPI_HANDLE handle, UINT32 level, void *context, void **status) 1913{ 1914 struct acpi_prw_data prw; 1915 ACPI_OBJECT_TYPE type; 1916 ACPI_HANDLE h; 1917 device_t bus, child; 1918 char *handle_str; 1919 int order; 1920 1921 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1922 1923 if (acpi_disabled("children")) 1924 return_ACPI_STATUS (AE_OK); 1925 1926 /* Skip this device if we think we'll have trouble with it. */ 1927 if (acpi_avoid(handle)) 1928 return_ACPI_STATUS (AE_OK); 1929 1930 bus = (device_t)context; 1931 if (ACPI_SUCCESS(AcpiGetType(handle, &type))) { 1932 handle_str = acpi_name(handle); 1933 switch (type) { 1934 case ACPI_TYPE_DEVICE: 1935 /* 1936 * Since we scan from \, be sure to skip system scope objects. 1937 * \_SB_ and \_TZ_ are defined in ACPICA as devices to work around 1938 * BIOS bugs. For example, \_SB_ is to allow \_SB_._INI to be run 1939 * during the intialization and \_TZ_ is to support Notify() on it. 1940 */ 1941 if (strcmp(handle_str, "\\_SB_") == 0 || 1942 strcmp(handle_str, "\\_TZ_") == 0) 1943 break; 1944 if (acpi_parse_prw(handle, &prw) == 0) 1945 AcpiSetupGpeForWake(handle, prw.gpe_handle, prw.gpe_bit); 1946 1947 /* 1948 * Ignore devices that do not have a _HID or _CID. They should 1949 * be discovered by other buses (e.g. the PCI bus driver). 1950 */ 1951 if (!acpi_has_hid(handle)) 1952 break; 1953 /* FALLTHROUGH */ 1954 case ACPI_TYPE_PROCESSOR: 1955 case ACPI_TYPE_THERMAL: 1956 case ACPI_TYPE_POWER: 1957 /* 1958 * Create a placeholder device for this node. Sort the 1959 * placeholder so that the probe/attach passes will run 1960 * breadth-first. Orders less than ACPI_DEV_BASE_ORDER 1961 * are reserved for special objects (i.e., system 1962 * resources). 1963 */ 1964 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "scanning '%s'\n", handle_str)); 1965 order = level * 10 + ACPI_DEV_BASE_ORDER; 1966 acpi_probe_order(handle, &order); 1967 child = BUS_ADD_CHILD(bus, order, NULL, -1); 1968 if (child == NULL) 1969 break; 1970 1971 /* Associate the handle with the device_t and vice versa. */ 1972 acpi_set_handle(child, handle); 1973 AcpiAttachData(handle, acpi_fake_objhandler, child); 1974 1975 /* 1976 * Check that the device is present. If it's not present, 1977 * leave it disabled (so that we have a device_t attached to 1978 * the handle, but we don't probe it). 1979 * 1980 * XXX PCI link devices sometimes report "present" but not 1981 * "functional" (i.e. if disabled). Go ahead and probe them 1982 * anyway since we may enable them later. 1983 */ 1984 if (type == ACPI_TYPE_DEVICE && !acpi_DeviceIsPresent(child)) { 1985 /* Never disable PCI link devices. */ 1986 if (acpi_MatchHid(handle, "PNP0C0F")) 1987 break; 1988 /* 1989 * Docking stations should remain enabled since the system 1990 * may be undocked at boot. 1991 */ 1992 if (ACPI_SUCCESS(AcpiGetHandle(handle, "_DCK", &h))) 1993 break; 1994 1995 device_disable(child); 1996 break; 1997 } 1998 1999 /* 2000 * Get the device's resource settings and attach them. 2001 * Note that if the device has _PRS but no _CRS, we need 2002 * to decide when it's appropriate to try to configure the 2003 * device. Ignore the return value here; it's OK for the 2004 * device not to have any resources. 2005 */ 2006 acpi_parse_resources(child, handle, &acpi_res_parse_set, NULL); 2007 break; 2008 } 2009 } 2010 2011 return_ACPI_STATUS (AE_OK); 2012} 2013 2014/* 2015 * AcpiAttachData() requires an object handler but never uses it. This is a 2016 * placeholder object handler so we can store a device_t in an ACPI_HANDLE. 2017 */ 2018void 2019acpi_fake_objhandler(ACPI_HANDLE h, void *data) 2020{ 2021} 2022 2023static void 2024acpi_shutdown_final(void *arg, int howto) 2025{ 2026 struct acpi_softc *sc = (struct acpi_softc *)arg; 2027 register_t intr; 2028 ACPI_STATUS status; 2029 2030 /* 2031 * XXX Shutdown code should only run on the BSP (cpuid 0). 2032 * Some chipsets do not power off the system correctly if called from 2033 * an AP. 2034 */ 2035 if ((howto & RB_POWEROFF) != 0) { 2036 status = AcpiEnterSleepStatePrep(ACPI_STATE_S5); 2037 if (ACPI_FAILURE(status)) { 2038 device_printf(sc->acpi_dev, "AcpiEnterSleepStatePrep failed - %s\n", 2039 AcpiFormatException(status)); 2040 return; 2041 } 2042 device_printf(sc->acpi_dev, "Powering system off\n"); 2043 intr = intr_disable(); 2044 status = AcpiEnterSleepState(ACPI_STATE_S5); 2045 if (ACPI_FAILURE(status)) { 2046 intr_restore(intr); 2047 device_printf(sc->acpi_dev, "power-off failed - %s\n", 2048 AcpiFormatException(status)); 2049 } else { 2050 DELAY(1000000); 2051 intr_restore(intr); 2052 device_printf(sc->acpi_dev, "power-off failed - timeout\n"); 2053 } 2054 } else if ((howto & RB_HALT) == 0 && sc->acpi_handle_reboot) { 2055 /* Reboot using the reset register. */ 2056 status = AcpiReset(); 2057 if (ACPI_SUCCESS(status)) { 2058 DELAY(1000000); 2059 device_printf(sc->acpi_dev, "reset failed - timeout\n"); 2060 } else if (status != AE_NOT_EXIST) 2061 device_printf(sc->acpi_dev, "reset failed - %s\n", 2062 AcpiFormatException(status)); 2063 } else if (sc->acpi_do_disable && panicstr == NULL) { 2064 /* 2065 * Only disable ACPI if the user requested. On some systems, writing 2066 * the disable value to SMI_CMD hangs the system. 2067 */ 2068 device_printf(sc->acpi_dev, "Shutting down\n"); 2069 AcpiTerminate(); 2070 } 2071} 2072 2073static void 2074acpi_enable_fixed_events(struct acpi_softc *sc) 2075{ 2076 static int first_time = 1; 2077 2078 /* Enable and clear fixed events and install handlers. */ 2079 if ((AcpiGbl_FADT.Flags & ACPI_FADT_POWER_BUTTON) == 0) { 2080 AcpiClearEvent(ACPI_EVENT_POWER_BUTTON); 2081 AcpiInstallFixedEventHandler(ACPI_EVENT_POWER_BUTTON, 2082 acpi_event_power_button_sleep, sc); 2083 if (first_time) 2084 device_printf(sc->acpi_dev, "Power Button (fixed)\n"); 2085 } 2086 if ((AcpiGbl_FADT.Flags & ACPI_FADT_SLEEP_BUTTON) == 0) { 2087 AcpiClearEvent(ACPI_EVENT_SLEEP_BUTTON); 2088 AcpiInstallFixedEventHandler(ACPI_EVENT_SLEEP_BUTTON, 2089 acpi_event_sleep_button_sleep, sc); 2090 if (first_time) 2091 device_printf(sc->acpi_dev, "Sleep Button (fixed)\n"); 2092 } 2093 2094 first_time = 0; 2095} 2096 2097/* 2098 * Returns true if the device is actually present and should 2099 * be attached to. This requires the present, enabled, UI-visible 2100 * and diagnostics-passed bits to be set. 2101 */ 2102BOOLEAN 2103acpi_DeviceIsPresent(device_t dev) 2104{ 2105 ACPI_DEVICE_INFO *devinfo; 2106 ACPI_HANDLE h; 2107 BOOLEAN present; 2108 2109 if ((h = acpi_get_handle(dev)) == NULL || 2110 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 2111 return (FALSE); 2112 2113 /* If no _STA method, must be present */ 2114 present = (devinfo->Valid & ACPI_VALID_STA) == 0 || 2115 ACPI_DEVICE_PRESENT(devinfo->CurrentStatus) ? TRUE : FALSE; 2116 2117 AcpiOsFree(devinfo); 2118 return (present); 2119} 2120 2121/* 2122 * Returns true if the battery is actually present and inserted. 2123 */ 2124BOOLEAN 2125acpi_BatteryIsPresent(device_t dev) 2126{ 2127 ACPI_DEVICE_INFO *devinfo; 2128 ACPI_HANDLE h; 2129 BOOLEAN present; 2130 2131 if ((h = acpi_get_handle(dev)) == NULL || 2132 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 2133 return (FALSE); 2134 2135 /* If no _STA method, must be present */ 2136 present = (devinfo->Valid & ACPI_VALID_STA) == 0 || 2137 ACPI_BATTERY_PRESENT(devinfo->CurrentStatus) ? TRUE : FALSE; 2138 2139 AcpiOsFree(devinfo); 2140 return (present); 2141} 2142 2143/* 2144 * Returns true if a device has at least one valid device ID. 2145 */ 2146static BOOLEAN 2147acpi_has_hid(ACPI_HANDLE h) 2148{ 2149 ACPI_DEVICE_INFO *devinfo; 2150 BOOLEAN ret; 2151 2152 if (h == NULL || 2153 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 2154 return (FALSE); 2155 2156 ret = FALSE; 2157 if ((devinfo->Valid & ACPI_VALID_HID) != 0) 2158 ret = TRUE; 2159 else if ((devinfo->Valid & ACPI_VALID_CID) != 0) 2160 if (devinfo->CompatibleIdList.Count > 0) 2161 ret = TRUE; 2162 2163 AcpiOsFree(devinfo); 2164 return (ret); 2165} 2166 2167/* 2168 * Match a HID string against a handle 2169 */ 2170BOOLEAN 2171acpi_MatchHid(ACPI_HANDLE h, const char *hid) 2172{ 2173 ACPI_DEVICE_INFO *devinfo; 2174 BOOLEAN ret; 2175 int i; 2176 2177 if (hid == NULL || h == NULL || 2178 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 2179 return (FALSE); 2180 2181 ret = FALSE; 2182 if ((devinfo->Valid & ACPI_VALID_HID) != 0 && 2183 strcmp(hid, devinfo->HardwareId.String) == 0) 2184 ret = TRUE; 2185 else if ((devinfo->Valid & ACPI_VALID_CID) != 0) 2186 for (i = 0; i < devinfo->CompatibleIdList.Count; i++) { 2187 if (strcmp(hid, devinfo->CompatibleIdList.Ids[i].String) == 0) { 2188 ret = TRUE; 2189 break; 2190 } 2191 } 2192 2193 AcpiOsFree(devinfo); 2194 return (ret); 2195} 2196 2197/* 2198 * Return the handle of a named object within our scope, ie. that of (parent) 2199 * or one if its parents. 2200 */ 2201ACPI_STATUS 2202acpi_GetHandleInScope(ACPI_HANDLE parent, char *path, ACPI_HANDLE *result) 2203{ 2204 ACPI_HANDLE r; 2205 ACPI_STATUS status; 2206 2207 /* Walk back up the tree to the root */ 2208 for (;;) { 2209 status = AcpiGetHandle(parent, path, &r); 2210 if (ACPI_SUCCESS(status)) { 2211 *result = r; 2212 return (AE_OK); 2213 } 2214 /* XXX Return error here? */ 2215 if (status != AE_NOT_FOUND) 2216 return (AE_OK); 2217 if (ACPI_FAILURE(AcpiGetParent(parent, &r))) 2218 return (AE_NOT_FOUND); 2219 parent = r; 2220 } 2221} 2222 2223/* 2224 * Allocate a buffer with a preset data size. 2225 */ 2226ACPI_BUFFER * 2227acpi_AllocBuffer(int size) 2228{ 2229 ACPI_BUFFER *buf; 2230 2231 if ((buf = malloc(size + sizeof(*buf), M_ACPIDEV, M_NOWAIT)) == NULL) 2232 return (NULL); 2233 buf->Length = size; 2234 buf->Pointer = (void *)(buf + 1); 2235 return (buf); 2236} 2237 2238ACPI_STATUS 2239acpi_SetInteger(ACPI_HANDLE handle, char *path, UINT32 number) 2240{ 2241 ACPI_OBJECT arg1; 2242 ACPI_OBJECT_LIST args; 2243 2244 arg1.Type = ACPI_TYPE_INTEGER; 2245 arg1.Integer.Value = number; 2246 args.Count = 1; 2247 args.Pointer = &arg1; 2248 2249 return (AcpiEvaluateObject(handle, path, &args, NULL)); 2250} 2251 2252/* 2253 * Evaluate a path that should return an integer. 2254 */ 2255ACPI_STATUS 2256acpi_GetInteger(ACPI_HANDLE handle, char *path, UINT32 *number) 2257{ 2258 ACPI_STATUS status; 2259 ACPI_BUFFER buf; 2260 ACPI_OBJECT param; 2261 2262 if (handle == NULL) 2263 handle = ACPI_ROOT_OBJECT; 2264 2265 /* 2266 * Assume that what we've been pointed at is an Integer object, or 2267 * a method that will return an Integer. 2268 */ 2269 buf.Pointer = ¶m; 2270 buf.Length = sizeof(param); 2271 status = AcpiEvaluateObject(handle, path, NULL, &buf); 2272 if (ACPI_SUCCESS(status)) { 2273 if (param.Type == ACPI_TYPE_INTEGER) 2274 *number = param.Integer.Value; 2275 else 2276 status = AE_TYPE; 2277 } 2278 2279 /* 2280 * In some applications, a method that's expected to return an Integer 2281 * may instead return a Buffer (probably to simplify some internal 2282 * arithmetic). We'll try to fetch whatever it is, and if it's a Buffer, 2283 * convert it into an Integer as best we can. 2284 * 2285 * This is a hack. 2286 */ 2287 if (status == AE_BUFFER_OVERFLOW) { 2288 if ((buf.Pointer = AcpiOsAllocate(buf.Length)) == NULL) { 2289 status = AE_NO_MEMORY; 2290 } else { 2291 status = AcpiEvaluateObject(handle, path, NULL, &buf); 2292 if (ACPI_SUCCESS(status)) 2293 status = acpi_ConvertBufferToInteger(&buf, number); 2294 AcpiOsFree(buf.Pointer); 2295 } 2296 } 2297 return (status); 2298} 2299 2300ACPI_STATUS 2301acpi_ConvertBufferToInteger(ACPI_BUFFER *bufp, UINT32 *number) 2302{ 2303 ACPI_OBJECT *p; 2304 UINT8 *val; 2305 int i; 2306 2307 p = (ACPI_OBJECT *)bufp->Pointer; 2308 if (p->Type == ACPI_TYPE_INTEGER) { 2309 *number = p->Integer.Value; 2310 return (AE_OK); 2311 } 2312 if (p->Type != ACPI_TYPE_BUFFER) 2313 return (AE_TYPE); 2314 if (p->Buffer.Length > sizeof(int)) 2315 return (AE_BAD_DATA); 2316 2317 *number = 0; 2318 val = p->Buffer.Pointer; 2319 for (i = 0; i < p->Buffer.Length; i++) 2320 *number += val[i] << (i * 8); 2321 return (AE_OK); 2322} 2323 2324/* 2325 * Iterate over the elements of an a package object, calling the supplied 2326 * function for each element. 2327 * 2328 * XXX possible enhancement might be to abort traversal on error. 2329 */ 2330ACPI_STATUS 2331acpi_ForeachPackageObject(ACPI_OBJECT *pkg, 2332 void (*func)(ACPI_OBJECT *comp, void *arg), void *arg) 2333{ 2334 ACPI_OBJECT *comp; 2335 int i; 2336 2337 if (pkg == NULL || pkg->Type != ACPI_TYPE_PACKAGE) 2338 return (AE_BAD_PARAMETER); 2339 2340 /* Iterate over components */ 2341 i = 0; 2342 comp = pkg->Package.Elements; 2343 for (; i < pkg->Package.Count; i++, comp++) 2344 func(comp, arg); 2345 2346 return (AE_OK); 2347} 2348 2349/* 2350 * Find the (index)th resource object in a set. 2351 */ 2352ACPI_STATUS 2353acpi_FindIndexedResource(ACPI_BUFFER *buf, int index, ACPI_RESOURCE **resp) 2354{ 2355 ACPI_RESOURCE *rp; 2356 int i; 2357 2358 rp = (ACPI_RESOURCE *)buf->Pointer; 2359 i = index; 2360 while (i-- > 0) { 2361 /* Range check */ 2362 if (rp > (ACPI_RESOURCE *)((u_int8_t *)buf->Pointer + buf->Length)) 2363 return (AE_BAD_PARAMETER); 2364 2365 /* Check for terminator */ 2366 if (rp->Type == ACPI_RESOURCE_TYPE_END_TAG || rp->Length == 0) 2367 return (AE_NOT_FOUND); 2368 rp = ACPI_NEXT_RESOURCE(rp); 2369 } 2370 if (resp != NULL) 2371 *resp = rp; 2372 2373 return (AE_OK); 2374} 2375 2376/* 2377 * Append an ACPI_RESOURCE to an ACPI_BUFFER. 2378 * 2379 * Given a pointer to an ACPI_RESOURCE structure, expand the ACPI_BUFFER 2380 * provided to contain it. If the ACPI_BUFFER is empty, allocate a sensible 2381 * backing block. If the ACPI_RESOURCE is NULL, return an empty set of 2382 * resources. 2383 */ 2384#define ACPI_INITIAL_RESOURCE_BUFFER_SIZE 512 2385 2386ACPI_STATUS 2387acpi_AppendBufferResource(ACPI_BUFFER *buf, ACPI_RESOURCE *res) 2388{ 2389 ACPI_RESOURCE *rp; 2390 void *newp; 2391 2392 /* Initialise the buffer if necessary. */ 2393 if (buf->Pointer == NULL) { 2394 buf->Length = ACPI_INITIAL_RESOURCE_BUFFER_SIZE; 2395 if ((buf->Pointer = AcpiOsAllocate(buf->Length)) == NULL) 2396 return (AE_NO_MEMORY); 2397 rp = (ACPI_RESOURCE *)buf->Pointer; 2398 rp->Type = ACPI_RESOURCE_TYPE_END_TAG; 2399 rp->Length = ACPI_RS_SIZE_MIN; 2400 } 2401 if (res == NULL) 2402 return (AE_OK); 2403 2404 /* 2405 * Scan the current buffer looking for the terminator. 2406 * This will either find the terminator or hit the end 2407 * of the buffer and return an error. 2408 */ 2409 rp = (ACPI_RESOURCE *)buf->Pointer; 2410 for (;;) { 2411 /* Range check, don't go outside the buffer */ 2412 if (rp >= (ACPI_RESOURCE *)((u_int8_t *)buf->Pointer + buf->Length)) 2413 return (AE_BAD_PARAMETER); 2414 if (rp->Type == ACPI_RESOURCE_TYPE_END_TAG || rp->Length == 0) 2415 break; 2416 rp = ACPI_NEXT_RESOURCE(rp); 2417 } 2418 2419 /* 2420 * Check the size of the buffer and expand if required. 2421 * 2422 * Required size is: 2423 * size of existing resources before terminator + 2424 * size of new resource and header + 2425 * size of terminator. 2426 * 2427 * Note that this loop should really only run once, unless 2428 * for some reason we are stuffing a *really* huge resource. 2429 */ 2430 while ((((u_int8_t *)rp - (u_int8_t *)buf->Pointer) + 2431 res->Length + ACPI_RS_SIZE_NO_DATA + 2432 ACPI_RS_SIZE_MIN) >= buf->Length) { 2433 if ((newp = AcpiOsAllocate(buf->Length * 2)) == NULL) 2434 return (AE_NO_MEMORY); 2435 bcopy(buf->Pointer, newp, buf->Length); 2436 rp = (ACPI_RESOURCE *)((u_int8_t *)newp + 2437 ((u_int8_t *)rp - (u_int8_t *)buf->Pointer)); 2438 AcpiOsFree(buf->Pointer); 2439 buf->Pointer = newp; 2440 buf->Length += buf->Length; 2441 } 2442 2443 /* Insert the new resource. */ 2444 bcopy(res, rp, res->Length + ACPI_RS_SIZE_NO_DATA); 2445 2446 /* And add the terminator. */ 2447 rp = ACPI_NEXT_RESOURCE(rp); 2448 rp->Type = ACPI_RESOURCE_TYPE_END_TAG; 2449 rp->Length = ACPI_RS_SIZE_MIN; 2450 2451 return (AE_OK); 2452} 2453 2454ACPI_STATUS 2455acpi_EvaluateOSC(ACPI_HANDLE handle, uint8_t *uuid, int revision, int count, 2456 uint32_t *caps_in, uint32_t *caps_out, bool query) 2457{ 2458 ACPI_OBJECT arg[4], *ret; 2459 ACPI_OBJECT_LIST arglist; 2460 ACPI_BUFFER buf; 2461 ACPI_STATUS status; 2462 2463 arglist.Pointer = arg; 2464 arglist.Count = 4; 2465 arg[0].Type = ACPI_TYPE_BUFFER; 2466 arg[0].Buffer.Length = ACPI_UUID_LENGTH; 2467 arg[0].Buffer.Pointer = uuid; 2468 arg[1].Type = ACPI_TYPE_INTEGER; 2469 arg[1].Integer.Value = revision; 2470 arg[2].Type = ACPI_TYPE_INTEGER; 2471 arg[2].Integer.Value = count; 2472 arg[3].Type = ACPI_TYPE_BUFFER; 2473 arg[3].Buffer.Length = count * sizeof(*caps_in); 2474 arg[3].Buffer.Pointer = (uint8_t *)caps_in; 2475 caps_in[0] = query ? 1 : 0; 2476 buf.Pointer = NULL; 2477 buf.Length = ACPI_ALLOCATE_BUFFER; 2478 status = AcpiEvaluateObjectTyped(handle, "_OSC", &arglist, &buf, 2479 ACPI_TYPE_BUFFER); 2480 if (ACPI_FAILURE(status)) 2481 return (status); 2482 if (caps_out != NULL) { 2483 ret = buf.Pointer; 2484 if (ret->Buffer.Length != count * sizeof(*caps_out)) { 2485 AcpiOsFree(buf.Pointer); 2486 return (AE_BUFFER_OVERFLOW); 2487 } 2488 bcopy(ret->Buffer.Pointer, caps_out, ret->Buffer.Length); 2489 } 2490 AcpiOsFree(buf.Pointer); 2491 return (status); 2492} 2493 2494/* 2495 * Set interrupt model. 2496 */ 2497ACPI_STATUS 2498acpi_SetIntrModel(int model) 2499{ 2500 2501 return (acpi_SetInteger(ACPI_ROOT_OBJECT, "_PIC", model)); 2502} 2503 2504/* 2505 * Walk subtables of a table and call a callback routine for each 2506 * subtable. The caller should provide the first subtable and a 2507 * pointer to the end of the table. This can be used to walk tables 2508 * such as MADT and SRAT that use subtable entries. 2509 */ 2510void 2511acpi_walk_subtables(void *first, void *end, acpi_subtable_handler *handler, 2512 void *arg) 2513{ 2514 ACPI_SUBTABLE_HEADER *entry; 2515 2516 for (entry = first; (void *)entry < end; ) { 2517 /* Avoid an infinite loop if we hit a bogus entry. */ 2518 if (entry->Length < sizeof(ACPI_SUBTABLE_HEADER)) 2519 return; 2520 2521 handler(entry, arg); 2522 entry = ACPI_ADD_PTR(ACPI_SUBTABLE_HEADER, entry, entry->Length); 2523 } 2524} 2525 2526/* 2527 * DEPRECATED. This interface has serious deficiencies and will be 2528 * removed. 2529 * 2530 * Immediately enter the sleep state. In the old model, acpiconf(8) ran 2531 * rc.suspend and rc.resume so we don't have to notify devd(8) to do this. 2532 */ 2533ACPI_STATUS 2534acpi_SetSleepState(struct acpi_softc *sc, int state) 2535{ 2536 static int once; 2537 2538 if (!once) { 2539 device_printf(sc->acpi_dev, 2540"warning: acpi_SetSleepState() deprecated, need to update your software\n"); 2541 once = 1; 2542 } 2543 return (acpi_EnterSleepState(sc, state)); 2544} 2545 2546#if defined(__amd64__) || defined(__i386__) 2547static void 2548acpi_sleep_force_task(void *context) 2549{ 2550 struct acpi_softc *sc = (struct acpi_softc *)context; 2551 2552 if (ACPI_FAILURE(acpi_EnterSleepState(sc, sc->acpi_next_sstate))) 2553 device_printf(sc->acpi_dev, "force sleep state S%d failed\n", 2554 sc->acpi_next_sstate); 2555} 2556 2557static void 2558acpi_sleep_force(void *arg) 2559{ 2560 struct acpi_softc *sc = (struct acpi_softc *)arg; 2561 2562 device_printf(sc->acpi_dev, 2563 "suspend request timed out, forcing sleep now\n"); 2564 /* 2565 * XXX Suspending from callout cause the freeze in DEVICE_SUSPEND(). 2566 * Suspend from acpi_task thread in stead. 2567 */ 2568 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 2569 acpi_sleep_force_task, sc))) 2570 device_printf(sc->acpi_dev, "AcpiOsExecute() for sleeping failed\n"); 2571} 2572#endif 2573 2574/* 2575 * Request that the system enter the given suspend state. All /dev/apm 2576 * devices and devd(8) will be notified. Userland then has a chance to 2577 * save state and acknowledge the request. The system sleeps once all 2578 * acks are in. 2579 */ 2580int 2581acpi_ReqSleepState(struct acpi_softc *sc, int state) 2582{ 2583#if defined(__amd64__) || defined(__i386__) 2584 struct apm_clone_data *clone; 2585 ACPI_STATUS status; 2586 2587 if (state < ACPI_STATE_S1 || state > ACPI_S_STATES_MAX) 2588 return (EINVAL); 2589 if (!acpi_sleep_states[state]) 2590 return (EOPNOTSUPP); 2591 2592 /* 2593 * If a reboot/shutdown/suspend request is already in progress or 2594 * suspend is blocked due to an upcoming shutdown, just return. 2595 */ 2596 if (rebooting || sc->acpi_next_sstate != 0 || suspend_blocked) { 2597 return (0); 2598 } 2599 2600 /* Wait until sleep is enabled. */ 2601 while (sc->acpi_sleep_disabled) { 2602 AcpiOsSleep(1000); 2603 } 2604 2605 ACPI_LOCK(acpi); 2606 2607 sc->acpi_next_sstate = state; 2608 2609 /* S5 (soft-off) should be entered directly with no waiting. */ 2610 if (state == ACPI_STATE_S5) { 2611 ACPI_UNLOCK(acpi); 2612 status = acpi_EnterSleepState(sc, state); 2613 return (ACPI_SUCCESS(status) ? 0 : ENXIO); 2614 } 2615 2616 /* Record the pending state and notify all apm devices. */ 2617 STAILQ_FOREACH(clone, &sc->apm_cdevs, entries) { 2618 clone->notify_status = APM_EV_NONE; 2619 if ((clone->flags & ACPI_EVF_DEVD) == 0) { 2620 selwakeuppri(&clone->sel_read, PZERO); 2621 KNOTE_LOCKED(&clone->sel_read.si_note, 0); 2622 } 2623 } 2624 2625 /* If devd(8) is not running, immediately enter the sleep state. */ 2626 if (!devctl_process_running()) { 2627 ACPI_UNLOCK(acpi); 2628 status = acpi_EnterSleepState(sc, state); 2629 return (ACPI_SUCCESS(status) ? 0 : ENXIO); 2630 } 2631 2632 /* 2633 * Set a timeout to fire if userland doesn't ack the suspend request 2634 * in time. This way we still eventually go to sleep if we were 2635 * overheating or running low on battery, even if userland is hung. 2636 * We cancel this timeout once all userland acks are in or the 2637 * suspend request is aborted. 2638 */ 2639 callout_reset(&sc->susp_force_to, 10 * hz, acpi_sleep_force, sc); 2640 ACPI_UNLOCK(acpi); 2641 2642 /* Now notify devd(8) also. */ 2643 acpi_UserNotify("Suspend", ACPI_ROOT_OBJECT, state); 2644 2645 return (0); 2646#else 2647 /* This platform does not support acpi suspend/resume. */ 2648 return (EOPNOTSUPP); 2649#endif 2650} 2651 2652/* 2653 * Acknowledge (or reject) a pending sleep state. The caller has 2654 * prepared for suspend and is now ready for it to proceed. If the 2655 * error argument is non-zero, it indicates suspend should be cancelled 2656 * and gives an errno value describing why. Once all votes are in, 2657 * we suspend the system. 2658 */ 2659int 2660acpi_AckSleepState(struct apm_clone_data *clone, int error) 2661{ 2662#if defined(__amd64__) || defined(__i386__) 2663 struct acpi_softc *sc; 2664 int ret, sleeping; 2665 2666 /* If no pending sleep state, return an error. */ 2667 ACPI_LOCK(acpi); 2668 sc = clone->acpi_sc; 2669 if (sc->acpi_next_sstate == 0) { 2670 ACPI_UNLOCK(acpi); 2671 return (ENXIO); 2672 } 2673 2674 /* Caller wants to abort suspend process. */ 2675 if (error) { 2676 sc->acpi_next_sstate = 0; 2677 callout_stop(&sc->susp_force_to); 2678 device_printf(sc->acpi_dev, 2679 "listener on %s cancelled the pending suspend\n", 2680 devtoname(clone->cdev)); 2681 ACPI_UNLOCK(acpi); 2682 return (0); 2683 } 2684 2685 /* 2686 * Mark this device as acking the suspend request. Then, walk through 2687 * all devices, seeing if they agree yet. We only count devices that 2688 * are writable since read-only devices couldn't ack the request. 2689 */ 2690 sleeping = TRUE; 2691 clone->notify_status = APM_EV_ACKED; 2692 STAILQ_FOREACH(clone, &sc->apm_cdevs, entries) { 2693 if ((clone->flags & ACPI_EVF_WRITE) != 0 && 2694 clone->notify_status != APM_EV_ACKED) { 2695 sleeping = FALSE; 2696 break; 2697 } 2698 } 2699 2700 /* If all devices have voted "yes", we will suspend now. */ 2701 if (sleeping) 2702 callout_stop(&sc->susp_force_to); 2703 ACPI_UNLOCK(acpi); 2704 ret = 0; 2705 if (sleeping) { 2706 if (ACPI_FAILURE(acpi_EnterSleepState(sc, sc->acpi_next_sstate))) 2707 ret = ENODEV; 2708 } 2709 return (ret); 2710#else 2711 /* This platform does not support acpi suspend/resume. */ 2712 return (EOPNOTSUPP); 2713#endif 2714} 2715 2716static void 2717acpi_sleep_enable(void *arg) 2718{ 2719 struct acpi_softc *sc = (struct acpi_softc *)arg; 2720 2721 /* Reschedule if the system is not fully up and running. */ 2722 if (!AcpiGbl_SystemAwakeAndRunning) { 2723 timeout(acpi_sleep_enable, sc, hz * ACPI_MINIMUM_AWAKETIME); 2724 return; 2725 } 2726 2727 ACPI_LOCK(acpi); 2728 sc->acpi_sleep_disabled = FALSE; 2729 ACPI_UNLOCK(acpi); 2730} 2731 2732static ACPI_STATUS 2733acpi_sleep_disable(struct acpi_softc *sc) 2734{ 2735 ACPI_STATUS status; 2736 2737 /* Fail if the system is not fully up and running. */ 2738 if (!AcpiGbl_SystemAwakeAndRunning) 2739 return (AE_ERROR); 2740 2741 ACPI_LOCK(acpi); 2742 status = sc->acpi_sleep_disabled ? AE_ERROR : AE_OK; 2743 sc->acpi_sleep_disabled = TRUE; 2744 ACPI_UNLOCK(acpi); 2745 2746 return (status); 2747} 2748 2749enum acpi_sleep_state { 2750 ACPI_SS_NONE, 2751 ACPI_SS_GPE_SET, 2752 ACPI_SS_DEV_SUSPEND, 2753 ACPI_SS_SLP_PREP, 2754 ACPI_SS_SLEPT, 2755}; 2756 2757/* 2758 * Enter the desired system sleep state. 2759 * 2760 * Currently we support S1-S5 but S4 is only S4BIOS 2761 */ 2762static ACPI_STATUS 2763acpi_EnterSleepState(struct acpi_softc *sc, int state) 2764{ 2765 register_t intr; 2766 ACPI_STATUS status; 2767 ACPI_EVENT_STATUS power_button_status; 2768 enum acpi_sleep_state slp_state; 2769 int sleep_result; 2770 2771 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); 2772 2773 if (state < ACPI_STATE_S1 || state > ACPI_S_STATES_MAX) 2774 return_ACPI_STATUS (AE_BAD_PARAMETER); 2775 if (!acpi_sleep_states[state]) { 2776 device_printf(sc->acpi_dev, "Sleep state S%d not supported by BIOS\n", 2777 state); 2778 return (AE_SUPPORT); 2779 } 2780 2781 /* Re-entry once we're suspending is not allowed. */ 2782 status = acpi_sleep_disable(sc); 2783 if (ACPI_FAILURE(status)) { 2784 device_printf(sc->acpi_dev, 2785 "suspend request ignored (not ready yet)\n"); 2786 return (status); 2787 } 2788 2789 if (state == ACPI_STATE_S5) { 2790 /* 2791 * Shut down cleanly and power off. This will call us back through the 2792 * shutdown handlers. 2793 */ 2794 shutdown_nice(RB_POWEROFF); 2795 return_ACPI_STATUS (AE_OK); 2796 } 2797 2798 EVENTHANDLER_INVOKE(power_suspend_early); 2799 stop_all_proc(); 2800 EVENTHANDLER_INVOKE(power_suspend); 2801 2802 if (smp_started) { 2803 thread_lock(curthread); 2804 sched_bind(curthread, 0); 2805 thread_unlock(curthread); 2806 } 2807 2808 /* 2809 * Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE 2810 * drivers need this. 2811 */ 2812 mtx_lock(&Giant); 2813 2814 slp_state = ACPI_SS_NONE; 2815 2816 sc->acpi_sstate = state; 2817 2818 /* Enable any GPEs as appropriate and requested by the user. */ 2819 acpi_wake_prep_walk(state); 2820 slp_state = ACPI_SS_GPE_SET; 2821 2822 /* 2823 * Inform all devices that we are going to sleep. If at least one 2824 * device fails, DEVICE_SUSPEND() automatically resumes the tree. 2825 * 2826 * XXX Note that a better two-pass approach with a 'veto' pass 2827 * followed by a "real thing" pass would be better, but the current 2828 * bus interface does not provide for this. 2829 */ 2830 if (DEVICE_SUSPEND(root_bus) != 0) { 2831 device_printf(sc->acpi_dev, "device_suspend failed\n"); 2832 goto backout; 2833 } 2834 slp_state = ACPI_SS_DEV_SUSPEND; 2835 2836 /* If testing device suspend only, back out of everything here. */ 2837 if (acpi_susp_bounce) 2838 goto backout; 2839 2840 status = AcpiEnterSleepStatePrep(state); 2841 if (ACPI_FAILURE(status)) { 2842 device_printf(sc->acpi_dev, "AcpiEnterSleepStatePrep failed - %s\n", 2843 AcpiFormatException(status)); 2844 goto backout; 2845 } 2846 slp_state = ACPI_SS_SLP_PREP; 2847 2848 if (sc->acpi_sleep_delay > 0) 2849 DELAY(sc->acpi_sleep_delay * 1000000); 2850 2851 intr = intr_disable(); 2852 if (state != ACPI_STATE_S1) { 2853 sleep_result = acpi_sleep_machdep(sc, state); 2854 acpi_wakeup_machdep(sc, state, sleep_result, 0); 2855 2856 /* 2857 * XXX According to ACPI specification SCI_EN bit should be restored 2858 * by ACPI platform (BIOS, firmware) to its pre-sleep state. 2859 * Unfortunately some BIOSes fail to do that and that leads to 2860 * unexpected and serious consequences during wake up like a system 2861 * getting stuck in SMI handlers. 2862 * This hack is picked up from Linux, which claims that it follows 2863 * Windows behavior. 2864 */ 2865 if (sleep_result == 1 && state != ACPI_STATE_S4) 2866 AcpiWriteBitRegister(ACPI_BITREG_SCI_ENABLE, ACPI_ENABLE_EVENT); 2867 2868 AcpiLeaveSleepStatePrep(state); 2869 2870 if (sleep_result == 1 && state == ACPI_STATE_S3) { 2871 /* 2872 * Prevent mis-interpretation of the wakeup by power button 2873 * as a request for power off. 2874 * Ideally we should post an appropriate wakeup event, 2875 * perhaps using acpi_event_power_button_wake or alike. 2876 * 2877 * Clearing of power button status after wakeup is mandated 2878 * by ACPI specification in section "Fixed Power Button". 2879 * 2880 * XXX As of ACPICA 20121114 AcpiGetEventStatus provides 2881 * status as 0/1 corressponding to inactive/active despite 2882 * its type being ACPI_EVENT_STATUS. In other words, 2883 * we should not test for ACPI_EVENT_FLAG_SET for time being. 2884 */ 2885 if (ACPI_SUCCESS(AcpiGetEventStatus(ACPI_EVENT_POWER_BUTTON, 2886 &power_button_status)) && power_button_status != 0) { 2887 AcpiClearEvent(ACPI_EVENT_POWER_BUTTON); 2888 device_printf(sc->acpi_dev, 2889 "cleared fixed power button status\n"); 2890 } 2891 } 2892 2893 intr_restore(intr); 2894 2895 /* call acpi_wakeup_machdep() again with interrupt enabled */ 2896 acpi_wakeup_machdep(sc, state, sleep_result, 1); 2897 2898 if (sleep_result == -1) 2899 goto backout; 2900 2901 /* Re-enable ACPI hardware on wakeup from sleep state 4. */ 2902 if (state == ACPI_STATE_S4) 2903 AcpiEnable(); 2904 } else { 2905 status = AcpiEnterSleepState(state); 2906 AcpiLeaveSleepStatePrep(state); 2907 intr_restore(intr); 2908 if (ACPI_FAILURE(status)) { 2909 device_printf(sc->acpi_dev, "AcpiEnterSleepState failed - %s\n", 2910 AcpiFormatException(status)); 2911 goto backout; 2912 } 2913 } 2914 slp_state = ACPI_SS_SLEPT; 2915 2916 /* 2917 * Back out state according to how far along we got in the suspend 2918 * process. This handles both the error and success cases. 2919 */ 2920backout: 2921 if (slp_state >= ACPI_SS_GPE_SET) { 2922 acpi_wake_prep_walk(state); 2923 sc->acpi_sstate = ACPI_STATE_S0; 2924 } 2925 if (slp_state >= ACPI_SS_DEV_SUSPEND) 2926 DEVICE_RESUME(root_bus); 2927 if (slp_state >= ACPI_SS_SLP_PREP) 2928 AcpiLeaveSleepState(state); 2929 if (slp_state >= ACPI_SS_SLEPT) { 2930 acpi_resync_clock(sc); 2931 acpi_enable_fixed_events(sc); 2932 } 2933 sc->acpi_next_sstate = 0; 2934 2935 mtx_unlock(&Giant); 2936 2937 if (smp_started) { 2938 thread_lock(curthread); 2939 sched_unbind(curthread); 2940 thread_unlock(curthread); 2941 } 2942 2943 resume_all_proc(); 2944 2945 EVENTHANDLER_INVOKE(power_resume); 2946 2947 /* Allow another sleep request after a while. */ 2948 timeout(acpi_sleep_enable, sc, hz * ACPI_MINIMUM_AWAKETIME); 2949 2950 /* Run /etc/rc.resume after we are back. */ 2951 if (devctl_process_running()) 2952 acpi_UserNotify("Resume", ACPI_ROOT_OBJECT, state); 2953 2954 return_ACPI_STATUS (status); 2955} 2956 2957static void 2958acpi_resync_clock(struct acpi_softc *sc) 2959{ 2960#ifdef __amd64__ 2961 if (!acpi_reset_clock) 2962 return; 2963 2964 /* 2965 * Warm up timecounter again and reset system clock. 2966 */ 2967 (void)timecounter->tc_get_timecount(timecounter); 2968 (void)timecounter->tc_get_timecount(timecounter); 2969 inittodr(time_second + sc->acpi_sleep_delay); 2970#endif 2971} 2972 2973/* Enable or disable the device's wake GPE. */ 2974int 2975acpi_wake_set_enable(device_t dev, int enable) 2976{ 2977 struct acpi_prw_data prw; 2978 ACPI_STATUS status; 2979 int flags; 2980 2981 /* Make sure the device supports waking the system and get the GPE. */ 2982 if (acpi_parse_prw(acpi_get_handle(dev), &prw) != 0) 2983 return (ENXIO); 2984 2985 flags = acpi_get_flags(dev); 2986 if (enable) { 2987 status = AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, 2988 ACPI_GPE_ENABLE); 2989 if (ACPI_FAILURE(status)) { 2990 device_printf(dev, "enable wake failed\n"); 2991 return (ENXIO); 2992 } 2993 acpi_set_flags(dev, flags | ACPI_FLAG_WAKE_ENABLED); 2994 } else { 2995 status = AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, 2996 ACPI_GPE_DISABLE); 2997 if (ACPI_FAILURE(status)) { 2998 device_printf(dev, "disable wake failed\n"); 2999 return (ENXIO); 3000 } 3001 acpi_set_flags(dev, flags & ~ACPI_FLAG_WAKE_ENABLED); 3002 } 3003 3004 return (0); 3005} 3006 3007static int 3008acpi_wake_sleep_prep(ACPI_HANDLE handle, int sstate) 3009{ 3010 struct acpi_prw_data prw; 3011 device_t dev; 3012 3013 /* Check that this is a wake-capable device and get its GPE. */ 3014 if (acpi_parse_prw(handle, &prw) != 0) 3015 return (ENXIO); 3016 dev = acpi_get_device(handle); 3017 3018 /* 3019 * The destination sleep state must be less than (i.e., higher power) 3020 * or equal to the value specified by _PRW. If this GPE cannot be 3021 * enabled for the next sleep state, then disable it. If it can and 3022 * the user requested it be enabled, turn on any required power resources 3023 * and set _PSW. 3024 */ 3025 if (sstate > prw.lowest_wake) { 3026 AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_DISABLE); 3027 if (bootverbose) 3028 device_printf(dev, "wake_prep disabled wake for %s (S%d)\n", 3029 acpi_name(handle), sstate); 3030 } else if (dev && (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) != 0) { 3031 acpi_pwr_wake_enable(handle, 1); 3032 acpi_SetInteger(handle, "_PSW", 1); 3033 if (bootverbose) 3034 device_printf(dev, "wake_prep enabled for %s (S%d)\n", 3035 acpi_name(handle), sstate); 3036 } 3037 3038 return (0); 3039} 3040 3041static int 3042acpi_wake_run_prep(ACPI_HANDLE handle, int sstate) 3043{ 3044 struct acpi_prw_data prw; 3045 device_t dev; 3046 3047 /* 3048 * Check that this is a wake-capable device and get its GPE. Return 3049 * now if the user didn't enable this device for wake. 3050 */ 3051 if (acpi_parse_prw(handle, &prw) != 0) 3052 return (ENXIO); 3053 dev = acpi_get_device(handle); 3054 if (dev == NULL || (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) == 0) 3055 return (0); 3056 3057 /* 3058 * If this GPE couldn't be enabled for the previous sleep state, it was 3059 * disabled before going to sleep so re-enable it. If it was enabled, 3060 * clear _PSW and turn off any power resources it used. 3061 */ 3062 if (sstate > prw.lowest_wake) { 3063 AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_ENABLE); 3064 if (bootverbose) 3065 device_printf(dev, "run_prep re-enabled %s\n", acpi_name(handle)); 3066 } else { 3067 acpi_SetInteger(handle, "_PSW", 0); 3068 acpi_pwr_wake_enable(handle, 0); 3069 if (bootverbose) 3070 device_printf(dev, "run_prep cleaned up for %s\n", 3071 acpi_name(handle)); 3072 } 3073 3074 return (0); 3075} 3076 3077static ACPI_STATUS 3078acpi_wake_prep(ACPI_HANDLE handle, UINT32 level, void *context, void **status) 3079{ 3080 int sstate; 3081 3082 /* If suspending, run the sleep prep function, otherwise wake. */ 3083 sstate = *(int *)context; 3084 if (AcpiGbl_SystemAwakeAndRunning) 3085 acpi_wake_sleep_prep(handle, sstate); 3086 else 3087 acpi_wake_run_prep(handle, sstate); 3088 return (AE_OK); 3089} 3090 3091/* Walk the tree rooted at acpi0 to prep devices for suspend/resume. */ 3092static int 3093acpi_wake_prep_walk(int sstate) 3094{ 3095 ACPI_HANDLE sb_handle; 3096 3097 if (ACPI_SUCCESS(AcpiGetHandle(ACPI_ROOT_OBJECT, "\\_SB_", &sb_handle))) 3098 AcpiWalkNamespace(ACPI_TYPE_DEVICE, sb_handle, 100, 3099 acpi_wake_prep, NULL, &sstate, NULL); 3100 return (0); 3101} 3102 3103/* Walk the tree rooted at acpi0 to attach per-device wake sysctls. */ 3104static int 3105acpi_wake_sysctl_walk(device_t dev) 3106{ 3107 int error, i, numdevs; 3108 device_t *devlist; 3109 device_t child; 3110 ACPI_STATUS status; 3111 3112 error = device_get_children(dev, &devlist, &numdevs); 3113 if (error != 0 || numdevs == 0) { 3114 if (numdevs == 0) 3115 free(devlist, M_TEMP); 3116 return (error); 3117 } 3118 for (i = 0; i < numdevs; i++) { 3119 child = devlist[i]; 3120 acpi_wake_sysctl_walk(child); 3121 if (!device_is_attached(child)) 3122 continue; 3123 status = AcpiEvaluateObject(acpi_get_handle(child), "_PRW", NULL, NULL); 3124 if (ACPI_SUCCESS(status)) { 3125 SYSCTL_ADD_PROC(device_get_sysctl_ctx(child), 3126 SYSCTL_CHILDREN(device_get_sysctl_tree(child)), OID_AUTO, 3127 "wake", CTLTYPE_INT | CTLFLAG_RW, child, 0, 3128 acpi_wake_set_sysctl, "I", "Device set to wake the system"); 3129 } 3130 } 3131 free(devlist, M_TEMP); 3132 3133 return (0); 3134} 3135 3136/* Enable or disable wake from userland. */ 3137static int 3138acpi_wake_set_sysctl(SYSCTL_HANDLER_ARGS) 3139{ 3140 int enable, error; 3141 device_t dev; 3142 3143 dev = (device_t)arg1; 3144 enable = (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) ? 1 : 0; 3145 3146 error = sysctl_handle_int(oidp, &enable, 0, req); 3147 if (error != 0 || req->newptr == NULL) 3148 return (error); 3149 if (enable != 0 && enable != 1) 3150 return (EINVAL); 3151 3152 return (acpi_wake_set_enable(dev, enable)); 3153} 3154 3155/* Parse a device's _PRW into a structure. */ 3156int 3157acpi_parse_prw(ACPI_HANDLE h, struct acpi_prw_data *prw) 3158{ 3159 ACPI_STATUS status; 3160 ACPI_BUFFER prw_buffer; 3161 ACPI_OBJECT *res, *res2; 3162 int error, i, power_count; 3163 3164 if (h == NULL || prw == NULL) 3165 return (EINVAL); 3166 3167 /* 3168 * The _PRW object (7.2.9) is only required for devices that have the 3169 * ability to wake the system from a sleeping state. 3170 */ 3171 error = EINVAL; 3172 prw_buffer.Pointer = NULL; 3173 prw_buffer.Length = ACPI_ALLOCATE_BUFFER; 3174 status = AcpiEvaluateObject(h, "_PRW", NULL, &prw_buffer); 3175 if (ACPI_FAILURE(status)) 3176 return (ENOENT); 3177 res = (ACPI_OBJECT *)prw_buffer.Pointer; 3178 if (res == NULL) 3179 return (ENOENT); 3180 if (!ACPI_PKG_VALID(res, 2)) 3181 goto out; 3182 3183 /* 3184 * Element 1 of the _PRW object: 3185 * The lowest power system sleeping state that can be entered while still 3186 * providing wake functionality. The sleeping state being entered must 3187 * be less than (i.e., higher power) or equal to this value. 3188 */ 3189 if (acpi_PkgInt32(res, 1, &prw->lowest_wake) != 0) 3190 goto out; 3191 3192 /* 3193 * Element 0 of the _PRW object: 3194 */ 3195 switch (res->Package.Elements[0].Type) { 3196 case ACPI_TYPE_INTEGER: 3197 /* 3198 * If the data type of this package element is numeric, then this 3199 * _PRW package element is the bit index in the GPEx_EN, in the 3200 * GPE blocks described in the FADT, of the enable bit that is 3201 * enabled for the wake event. 3202 */ 3203 prw->gpe_handle = NULL; 3204 prw->gpe_bit = res->Package.Elements[0].Integer.Value; 3205 error = 0; 3206 break; 3207 case ACPI_TYPE_PACKAGE: 3208 /* 3209 * If the data type of this package element is a package, then this 3210 * _PRW package element is itself a package containing two 3211 * elements. The first is an object reference to the GPE Block 3212 * device that contains the GPE that will be triggered by the wake 3213 * event. The second element is numeric and it contains the bit 3214 * index in the GPEx_EN, in the GPE Block referenced by the 3215 * first element in the package, of the enable bit that is enabled for 3216 * the wake event. 3217 * 3218 * For example, if this field is a package then it is of the form: 3219 * Package() {\_SB.PCI0.ISA.GPE, 2} 3220 */ 3221 res2 = &res->Package.Elements[0]; 3222 if (!ACPI_PKG_VALID(res2, 2)) 3223 goto out; 3224 prw->gpe_handle = acpi_GetReference(NULL, &res2->Package.Elements[0]); 3225 if (prw->gpe_handle == NULL) 3226 goto out; 3227 if (acpi_PkgInt32(res2, 1, &prw->gpe_bit) != 0) 3228 goto out; 3229 error = 0; 3230 break; 3231 default: 3232 goto out; 3233 } 3234 3235 /* Elements 2 to N of the _PRW object are power resources. */ 3236 power_count = res->Package.Count - 2; 3237 if (power_count > ACPI_PRW_MAX_POWERRES) { 3238 printf("ACPI device %s has too many power resources\n", acpi_name(h)); 3239 power_count = 0; 3240 } 3241 prw->power_res_count = power_count; 3242 for (i = 0; i < power_count; i++) 3243 prw->power_res[i] = res->Package.Elements[i]; 3244 3245out: 3246 if (prw_buffer.Pointer != NULL) 3247 AcpiOsFree(prw_buffer.Pointer); 3248 return (error); 3249} 3250 3251/* 3252 * ACPI Event Handlers 3253 */ 3254 3255/* System Event Handlers (registered by EVENTHANDLER_REGISTER) */ 3256 3257static void 3258acpi_system_eventhandler_sleep(void *arg, int state) 3259{ 3260 struct acpi_softc *sc = (struct acpi_softc *)arg; 3261 int ret; 3262 3263 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); 3264 3265 /* Check if button action is disabled or unknown. */ 3266 if (state == ACPI_STATE_UNKNOWN) 3267 return; 3268 3269 /* Request that the system prepare to enter the given suspend state. */ 3270 ret = acpi_ReqSleepState(sc, state); 3271 if (ret != 0) 3272 device_printf(sc->acpi_dev, 3273 "request to enter state S%d failed (err %d)\n", state, ret); 3274 3275 return_VOID; 3276} 3277 3278static void 3279acpi_system_eventhandler_wakeup(void *arg, int state) 3280{ 3281 3282 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); 3283 3284 /* Currently, nothing to do for wakeup. */ 3285 3286 return_VOID; 3287} 3288 3289/* 3290 * ACPICA Event Handlers (FixedEvent, also called from button notify handler) 3291 */ 3292static void 3293acpi_invoke_sleep_eventhandler(void *context) 3294{ 3295 3296 EVENTHANDLER_INVOKE(acpi_sleep_event, *(int *)context); 3297} 3298 3299static void 3300acpi_invoke_wake_eventhandler(void *context) 3301{ 3302 3303 EVENTHANDLER_INVOKE(acpi_wakeup_event, *(int *)context); 3304} 3305 3306UINT32 3307acpi_event_power_button_sleep(void *context) 3308{ 3309 struct acpi_softc *sc = (struct acpi_softc *)context; 3310 3311 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3312 3313 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3314 acpi_invoke_sleep_eventhandler, &sc->acpi_power_button_sx))) 3315 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3316 return_VALUE (ACPI_INTERRUPT_HANDLED); 3317} 3318 3319UINT32 3320acpi_event_power_button_wake(void *context) 3321{ 3322 struct acpi_softc *sc = (struct acpi_softc *)context; 3323 3324 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3325 3326 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3327 acpi_invoke_wake_eventhandler, &sc->acpi_power_button_sx))) 3328 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3329 return_VALUE (ACPI_INTERRUPT_HANDLED); 3330} 3331 3332UINT32 3333acpi_event_sleep_button_sleep(void *context) 3334{ 3335 struct acpi_softc *sc = (struct acpi_softc *)context; 3336 3337 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3338 3339 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3340 acpi_invoke_sleep_eventhandler, &sc->acpi_sleep_button_sx))) 3341 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3342 return_VALUE (ACPI_INTERRUPT_HANDLED); 3343} 3344 3345UINT32 3346acpi_event_sleep_button_wake(void *context) 3347{ 3348 struct acpi_softc *sc = (struct acpi_softc *)context; 3349 3350 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3351 3352 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3353 acpi_invoke_wake_eventhandler, &sc->acpi_sleep_button_sx))) 3354 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3355 return_VALUE (ACPI_INTERRUPT_HANDLED); 3356} 3357 3358/* 3359 * XXX This static buffer is suboptimal. There is no locking so only 3360 * use this for single-threaded callers. 3361 */ 3362char * 3363acpi_name(ACPI_HANDLE handle) 3364{ 3365 ACPI_BUFFER buf; 3366 static char data[256]; 3367 3368 buf.Length = sizeof(data); 3369 buf.Pointer = data; 3370 3371 if (handle && ACPI_SUCCESS(AcpiGetName(handle, ACPI_FULL_PATHNAME, &buf))) 3372 return (data); 3373 return ("(unknown)"); 3374} 3375 3376/* 3377 * Debugging/bug-avoidance. Avoid trying to fetch info on various 3378 * parts of the namespace. 3379 */ 3380int 3381acpi_avoid(ACPI_HANDLE handle) 3382{ 3383 char *cp, *env, *np; 3384 int len; 3385 3386 np = acpi_name(handle); 3387 if (*np == '\\') 3388 np++; 3389 if ((env = getenv("debug.acpi.avoid")) == NULL) 3390 return (0); 3391 3392 /* Scan the avoid list checking for a match */ 3393 cp = env; 3394 for (;;) { 3395 while (*cp != 0 && isspace(*cp)) 3396 cp++; 3397 if (*cp == 0) 3398 break; 3399 len = 0; 3400 while (cp[len] != 0 && !isspace(cp[len])) 3401 len++; 3402 if (!strncmp(cp, np, len)) { 3403 freeenv(env); 3404 return(1); 3405 } 3406 cp += len; 3407 } 3408 freeenv(env); 3409 3410 return (0); 3411} 3412 3413/* 3414 * Debugging/bug-avoidance. Disable ACPI subsystem components. 3415 */ 3416int 3417acpi_disabled(char *subsys) 3418{ 3419 char *cp, *env; 3420 int len; 3421 3422 if ((env = getenv("debug.acpi.disabled")) == NULL) 3423 return (0); 3424 if (strcmp(env, "all") == 0) { 3425 freeenv(env); 3426 return (1); 3427 } 3428 3429 /* Scan the disable list, checking for a match. */ 3430 cp = env; 3431 for (;;) { 3432 while (*cp != '\0' && isspace(*cp)) 3433 cp++; 3434 if (*cp == '\0') 3435 break; 3436 len = 0; 3437 while (cp[len] != '\0' && !isspace(cp[len])) 3438 len++; 3439 if (strncmp(cp, subsys, len) == 0) { 3440 freeenv(env); 3441 return (1); 3442 } 3443 cp += len; 3444 } 3445 freeenv(env); 3446 3447 return (0); 3448} 3449 3450static void 3451acpi_lookup(void *arg, const char *name, device_t *dev) 3452{ 3453 ACPI_HANDLE handle; 3454 3455 if (*dev != NULL) 3456 return; 3457 3458 /* 3459 * Allow any handle name that is specified as an absolute path and 3460 * starts with '\'. We could restrict this to \_SB and friends, 3461 * but see acpi_probe_children() for notes on why we scan the entire 3462 * namespace for devices. 3463 * 3464 * XXX: The pathname argument to AcpiGetHandle() should be fixed to 3465 * be const. 3466 */ 3467 if (name[0] != '\\') 3468 return; 3469 if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, __DECONST(char *, name), 3470 &handle))) 3471 return; 3472 *dev = acpi_get_device(handle); 3473} 3474 3475/* 3476 * Control interface. 3477 * 3478 * We multiplex ioctls for all participating ACPI devices here. Individual 3479 * drivers wanting to be accessible via /dev/acpi should use the 3480 * register/deregister interface to make their handlers visible. 3481 */ 3482struct acpi_ioctl_hook 3483{ 3484 TAILQ_ENTRY(acpi_ioctl_hook) link; 3485 u_long cmd; 3486 acpi_ioctl_fn fn; 3487 void *arg; 3488}; 3489 3490static TAILQ_HEAD(,acpi_ioctl_hook) acpi_ioctl_hooks; 3491static int acpi_ioctl_hooks_initted; 3492 3493int 3494acpi_register_ioctl(u_long cmd, acpi_ioctl_fn fn, void *arg) 3495{ 3496 struct acpi_ioctl_hook *hp; 3497 3498 if ((hp = malloc(sizeof(*hp), M_ACPIDEV, M_NOWAIT)) == NULL) 3499 return (ENOMEM); 3500 hp->cmd = cmd; 3501 hp->fn = fn; 3502 hp->arg = arg; 3503 3504 ACPI_LOCK(acpi); 3505 if (acpi_ioctl_hooks_initted == 0) { 3506 TAILQ_INIT(&acpi_ioctl_hooks); 3507 acpi_ioctl_hooks_initted = 1; 3508 } 3509 TAILQ_INSERT_TAIL(&acpi_ioctl_hooks, hp, link); 3510 ACPI_UNLOCK(acpi); 3511 3512 return (0); 3513} 3514 3515void 3516acpi_deregister_ioctl(u_long cmd, acpi_ioctl_fn fn) 3517{ 3518 struct acpi_ioctl_hook *hp; 3519 3520 ACPI_LOCK(acpi); 3521 TAILQ_FOREACH(hp, &acpi_ioctl_hooks, link) 3522 if (hp->cmd == cmd && hp->fn == fn) 3523 break; 3524 3525 if (hp != NULL) { 3526 TAILQ_REMOVE(&acpi_ioctl_hooks, hp, link); 3527 free(hp, M_ACPIDEV); 3528 } 3529 ACPI_UNLOCK(acpi); 3530} 3531 3532static int 3533acpiopen(struct cdev *dev, int flag, int fmt, struct thread *td) 3534{ 3535 return (0); 3536} 3537 3538static int 3539acpiclose(struct cdev *dev, int flag, int fmt, struct thread *td) 3540{ 3541 return (0); 3542} 3543 3544static int 3545acpiioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) 3546{ 3547 struct acpi_softc *sc; 3548 struct acpi_ioctl_hook *hp; 3549 int error, state; 3550 3551 error = 0; 3552 hp = NULL; 3553 sc = dev->si_drv1; 3554 3555 /* 3556 * Scan the list of registered ioctls, looking for handlers. 3557 */ 3558 ACPI_LOCK(acpi); 3559 if (acpi_ioctl_hooks_initted) 3560 TAILQ_FOREACH(hp, &acpi_ioctl_hooks, link) { 3561 if (hp->cmd == cmd) 3562 break; 3563 } 3564 ACPI_UNLOCK(acpi); 3565 if (hp) 3566 return (hp->fn(cmd, addr, hp->arg)); 3567 3568 /* 3569 * Core ioctls are not permitted for non-writable user. 3570 * Currently, other ioctls just fetch information. 3571 * Not changing system behavior. 3572 */ 3573 if ((flag & FWRITE) == 0) 3574 return (EPERM); 3575 3576 /* Core system ioctls. */ 3577 switch (cmd) { 3578 case ACPIIO_REQSLPSTATE: 3579 state = *(int *)addr; 3580 if (state != ACPI_STATE_S5) 3581 return (acpi_ReqSleepState(sc, state)); 3582 device_printf(sc->acpi_dev, "power off via acpi ioctl not supported\n"); 3583 error = EOPNOTSUPP; 3584 break; 3585 case ACPIIO_ACKSLPSTATE: 3586 error = *(int *)addr; 3587 error = acpi_AckSleepState(sc->acpi_clone, error); 3588 break; 3589 case ACPIIO_SETSLPSTATE: /* DEPRECATED */ 3590 state = *(int *)addr; 3591 if (state < ACPI_STATE_S0 || state > ACPI_S_STATES_MAX) 3592 return (EINVAL); 3593 if (!acpi_sleep_states[state]) 3594 return (EOPNOTSUPP); 3595 if (ACPI_FAILURE(acpi_SetSleepState(sc, state))) 3596 error = ENXIO; 3597 break; 3598 default: 3599 error = ENXIO; 3600 break; 3601 } 3602 3603 return (error); 3604} 3605 3606static int 3607acpi_sname2sstate(const char *sname) 3608{ 3609 int sstate; 3610 3611 if (toupper(sname[0]) == 'S') { 3612 sstate = sname[1] - '0'; 3613 if (sstate >= ACPI_STATE_S0 && sstate <= ACPI_STATE_S5 && 3614 sname[2] == '\0') 3615 return (sstate); 3616 } else if (strcasecmp(sname, "NONE") == 0) 3617 return (ACPI_STATE_UNKNOWN); 3618 return (-1); 3619} 3620 3621static const char * 3622acpi_sstate2sname(int sstate) 3623{ 3624 static const char *snames[] = { "S0", "S1", "S2", "S3", "S4", "S5" }; 3625 3626 if (sstate >= ACPI_STATE_S0 && sstate <= ACPI_STATE_S5) 3627 return (snames[sstate]); 3628 else if (sstate == ACPI_STATE_UNKNOWN) 3629 return ("NONE"); 3630 return (NULL); 3631} 3632 3633static int 3634acpi_supported_sleep_state_sysctl(SYSCTL_HANDLER_ARGS) 3635{ 3636 int error; 3637 struct sbuf sb; 3638 UINT8 state; 3639 3640 sbuf_new(&sb, NULL, 32, SBUF_AUTOEXTEND); 3641 for (state = ACPI_STATE_S1; state < ACPI_S_STATE_COUNT; state++) 3642 if (acpi_sleep_states[state]) 3643 sbuf_printf(&sb, "%s ", acpi_sstate2sname(state)); 3644 sbuf_trim(&sb); 3645 sbuf_finish(&sb); 3646 error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req); 3647 sbuf_delete(&sb); 3648 return (error); 3649} 3650 3651static int 3652acpi_sleep_state_sysctl(SYSCTL_HANDLER_ARGS) 3653{ 3654 char sleep_state[10]; 3655 int error, new_state, old_state; 3656 3657 old_state = *(int *)oidp->oid_arg1; 3658 strlcpy(sleep_state, acpi_sstate2sname(old_state), sizeof(sleep_state)); 3659 error = sysctl_handle_string(oidp, sleep_state, sizeof(sleep_state), req); 3660 if (error == 0 && req->newptr != NULL) { 3661 new_state = acpi_sname2sstate(sleep_state); 3662 if (new_state < ACPI_STATE_S1) 3663 return (EINVAL); 3664 if (new_state < ACPI_S_STATE_COUNT && !acpi_sleep_states[new_state]) 3665 return (EOPNOTSUPP); 3666 if (new_state != old_state) 3667 *(int *)oidp->oid_arg1 = new_state; 3668 } 3669 return (error); 3670} 3671 3672/* Inform devctl(4) when we receive a Notify. */ 3673void 3674acpi_UserNotify(const char *subsystem, ACPI_HANDLE h, uint8_t notify) 3675{ 3676 char notify_buf[16]; 3677 ACPI_BUFFER handle_buf; 3678 ACPI_STATUS status; 3679 3680 if (subsystem == NULL) 3681 return; 3682 3683 handle_buf.Pointer = NULL; 3684 handle_buf.Length = ACPI_ALLOCATE_BUFFER; 3685 status = AcpiNsHandleToPathname(h, &handle_buf, FALSE); 3686 if (ACPI_FAILURE(status)) 3687 return; 3688 snprintf(notify_buf, sizeof(notify_buf), "notify=0x%02x", notify); 3689 devctl_notify("ACPI", subsystem, handle_buf.Pointer, notify_buf); 3690 AcpiOsFree(handle_buf.Pointer); 3691} 3692 3693#ifdef ACPI_DEBUG 3694/* 3695 * Support for parsing debug options from the kernel environment. 3696 * 3697 * Bits may be set in the AcpiDbgLayer and AcpiDbgLevel debug registers 3698 * by specifying the names of the bits in the debug.acpi.layer and 3699 * debug.acpi.level environment variables. Bits may be unset by 3700 * prefixing the bit name with !. 3701 */ 3702struct debugtag 3703{ 3704 char *name; 3705 UINT32 value; 3706}; 3707 3708static struct debugtag dbg_layer[] = { 3709 {"ACPI_UTILITIES", ACPI_UTILITIES}, 3710 {"ACPI_HARDWARE", ACPI_HARDWARE}, 3711 {"ACPI_EVENTS", ACPI_EVENTS}, 3712 {"ACPI_TABLES", ACPI_TABLES}, 3713 {"ACPI_NAMESPACE", ACPI_NAMESPACE}, 3714 {"ACPI_PARSER", ACPI_PARSER}, 3715 {"ACPI_DISPATCHER", ACPI_DISPATCHER}, 3716 {"ACPI_EXECUTER", ACPI_EXECUTER}, 3717 {"ACPI_RESOURCES", ACPI_RESOURCES}, 3718 {"ACPI_CA_DEBUGGER", ACPI_CA_DEBUGGER}, 3719 {"ACPI_OS_SERVICES", ACPI_OS_SERVICES}, 3720 {"ACPI_CA_DISASSEMBLER", ACPI_CA_DISASSEMBLER}, 3721 {"ACPI_ALL_COMPONENTS", ACPI_ALL_COMPONENTS}, 3722 3723 {"ACPI_AC_ADAPTER", ACPI_AC_ADAPTER}, 3724 {"ACPI_BATTERY", ACPI_BATTERY}, 3725 {"ACPI_BUS", ACPI_BUS}, 3726 {"ACPI_BUTTON", ACPI_BUTTON}, 3727 {"ACPI_EC", ACPI_EC}, 3728 {"ACPI_FAN", ACPI_FAN}, 3729 {"ACPI_POWERRES", ACPI_POWERRES}, 3730 {"ACPI_PROCESSOR", ACPI_PROCESSOR}, 3731 {"ACPI_THERMAL", ACPI_THERMAL}, 3732 {"ACPI_TIMER", ACPI_TIMER}, 3733 {"ACPI_ALL_DRIVERS", ACPI_ALL_DRIVERS}, 3734 {NULL, 0} 3735}; 3736 3737static struct debugtag dbg_level[] = { 3738 {"ACPI_LV_INIT", ACPI_LV_INIT}, 3739 {"ACPI_LV_DEBUG_OBJECT", ACPI_LV_DEBUG_OBJECT}, 3740 {"ACPI_LV_INFO", ACPI_LV_INFO}, 3741 {"ACPI_LV_REPAIR", ACPI_LV_REPAIR}, 3742 {"ACPI_LV_ALL_EXCEPTIONS", ACPI_LV_ALL_EXCEPTIONS}, 3743 3744 /* Trace verbosity level 1 [Standard Trace Level] */ 3745 {"ACPI_LV_INIT_NAMES", ACPI_LV_INIT_NAMES}, 3746 {"ACPI_LV_PARSE", ACPI_LV_PARSE}, 3747 {"ACPI_LV_LOAD", ACPI_LV_LOAD}, 3748 {"ACPI_LV_DISPATCH", ACPI_LV_DISPATCH}, 3749 {"ACPI_LV_EXEC", ACPI_LV_EXEC}, 3750 {"ACPI_LV_NAMES", ACPI_LV_NAMES}, 3751 {"ACPI_LV_OPREGION", ACPI_LV_OPREGION}, 3752 {"ACPI_LV_BFIELD", ACPI_LV_BFIELD}, 3753 {"ACPI_LV_TABLES", ACPI_LV_TABLES}, 3754 {"ACPI_LV_VALUES", ACPI_LV_VALUES}, 3755 {"ACPI_LV_OBJECTS", ACPI_LV_OBJECTS}, 3756 {"ACPI_LV_RESOURCES", ACPI_LV_RESOURCES}, 3757 {"ACPI_LV_USER_REQUESTS", ACPI_LV_USER_REQUESTS}, 3758 {"ACPI_LV_PACKAGE", ACPI_LV_PACKAGE}, 3759 {"ACPI_LV_VERBOSITY1", ACPI_LV_VERBOSITY1}, 3760 3761 /* Trace verbosity level 2 [Function tracing and memory allocation] */ 3762 {"ACPI_LV_ALLOCATIONS", ACPI_LV_ALLOCATIONS}, 3763 {"ACPI_LV_FUNCTIONS", ACPI_LV_FUNCTIONS}, 3764 {"ACPI_LV_OPTIMIZATIONS", ACPI_LV_OPTIMIZATIONS}, 3765 {"ACPI_LV_VERBOSITY2", ACPI_LV_VERBOSITY2}, 3766 {"ACPI_LV_ALL", ACPI_LV_ALL}, 3767 3768 /* Trace verbosity level 3 [Threading, I/O, and Interrupts] */ 3769 {"ACPI_LV_MUTEX", ACPI_LV_MUTEX}, 3770 {"ACPI_LV_THREADS", ACPI_LV_THREADS}, 3771 {"ACPI_LV_IO", ACPI_LV_IO}, 3772 {"ACPI_LV_INTERRUPTS", ACPI_LV_INTERRUPTS}, 3773 {"ACPI_LV_VERBOSITY3", ACPI_LV_VERBOSITY3}, 3774 3775 /* Exceptionally verbose output -- also used in the global "DebugLevel" */ 3776 {"ACPI_LV_AML_DISASSEMBLE", ACPI_LV_AML_DISASSEMBLE}, 3777 {"ACPI_LV_VERBOSE_INFO", ACPI_LV_VERBOSE_INFO}, 3778 {"ACPI_LV_FULL_TABLES", ACPI_LV_FULL_TABLES}, 3779 {"ACPI_LV_EVENTS", ACPI_LV_EVENTS}, 3780 {"ACPI_LV_VERBOSE", ACPI_LV_VERBOSE}, 3781 {NULL, 0} 3782}; 3783 3784static void 3785acpi_parse_debug(char *cp, struct debugtag *tag, UINT32 *flag) 3786{ 3787 char *ep; 3788 int i, l; 3789 int set; 3790 3791 while (*cp) { 3792 if (isspace(*cp)) { 3793 cp++; 3794 continue; 3795 } 3796 ep = cp; 3797 while (*ep && !isspace(*ep)) 3798 ep++; 3799 if (*cp == '!') { 3800 set = 0; 3801 cp++; 3802 if (cp == ep) 3803 continue; 3804 } else { 3805 set = 1; 3806 } 3807 l = ep - cp; 3808 for (i = 0; tag[i].name != NULL; i++) { 3809 if (!strncmp(cp, tag[i].name, l)) { 3810 if (set) 3811 *flag |= tag[i].value; 3812 else 3813 *flag &= ~tag[i].value; 3814 } 3815 } 3816 cp = ep; 3817 } 3818} 3819 3820static void 3821acpi_set_debugging(void *junk) 3822{ 3823 char *layer, *level; 3824 3825 if (cold) { 3826 AcpiDbgLayer = 0; 3827 AcpiDbgLevel = 0; 3828 } 3829 3830 layer = getenv("debug.acpi.layer"); 3831 level = getenv("debug.acpi.level"); 3832 if (layer == NULL && level == NULL) 3833 return; 3834 3835 printf("ACPI set debug"); 3836 if (layer != NULL) { 3837 if (strcmp("NONE", layer) != 0) 3838 printf(" layer '%s'", layer); 3839 acpi_parse_debug(layer, &dbg_layer[0], &AcpiDbgLayer); 3840 freeenv(layer); 3841 } 3842 if (level != NULL) { 3843 if (strcmp("NONE", level) != 0) 3844 printf(" level '%s'", level); 3845 acpi_parse_debug(level, &dbg_level[0], &AcpiDbgLevel); 3846 freeenv(level); 3847 } 3848 printf("\n"); 3849} 3850 3851SYSINIT(acpi_debugging, SI_SUB_TUNABLES, SI_ORDER_ANY, acpi_set_debugging, 3852 NULL); 3853 3854static int 3855acpi_debug_sysctl(SYSCTL_HANDLER_ARGS) 3856{ 3857 int error, *dbg; 3858 struct debugtag *tag; 3859 struct sbuf sb; 3860 char temp[128]; 3861 3862 if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) 3863 return (ENOMEM); 3864 if (strcmp(oidp->oid_arg1, "debug.acpi.layer") == 0) { 3865 tag = &dbg_layer[0]; 3866 dbg = &AcpiDbgLayer; 3867 } else { 3868 tag = &dbg_level[0]; 3869 dbg = &AcpiDbgLevel; 3870 } 3871 3872 /* Get old values if this is a get request. */ 3873 ACPI_SERIAL_BEGIN(acpi); 3874 if (*dbg == 0) { 3875 sbuf_cpy(&sb, "NONE"); 3876 } else if (req->newptr == NULL) { 3877 for (; tag->name != NULL; tag++) { 3878 if ((*dbg & tag->value) == tag->value) 3879 sbuf_printf(&sb, "%s ", tag->name); 3880 } 3881 } 3882 sbuf_trim(&sb); 3883 sbuf_finish(&sb); 3884 strlcpy(temp, sbuf_data(&sb), sizeof(temp)); 3885 sbuf_delete(&sb); 3886 3887 error = sysctl_handle_string(oidp, temp, sizeof(temp), req); 3888 3889 /* Check for error or no change */ 3890 if (error == 0 && req->newptr != NULL) { 3891 *dbg = 0; 3892 setenv((char *)oidp->oid_arg1, temp); 3893 acpi_set_debugging(NULL); 3894 } 3895 ACPI_SERIAL_END(acpi); 3896 3897 return (error); 3898} 3899 3900SYSCTL_PROC(_debug_acpi, OID_AUTO, layer, CTLFLAG_RW | CTLTYPE_STRING, 3901 "debug.acpi.layer", 0, acpi_debug_sysctl, "A", ""); 3902SYSCTL_PROC(_debug_acpi, OID_AUTO, level, CTLFLAG_RW | CTLTYPE_STRING, 3903 "debug.acpi.level", 0, acpi_debug_sysctl, "A", ""); 3904#endif /* ACPI_DEBUG */ 3905 3906static int 3907acpi_debug_objects_sysctl(SYSCTL_HANDLER_ARGS) 3908{ 3909 int error; 3910 int old; 3911 3912 old = acpi_debug_objects; 3913 error = sysctl_handle_int(oidp, &acpi_debug_objects, 0, req); 3914 if (error != 0 || req->newptr == NULL) 3915 return (error); 3916 if (old == acpi_debug_objects || (old && acpi_debug_objects)) 3917 return (0); 3918 3919 ACPI_SERIAL_BEGIN(acpi); 3920 AcpiGbl_EnableAmlDebugObject = acpi_debug_objects ? TRUE : FALSE; 3921 ACPI_SERIAL_END(acpi); 3922 3923 return (0); 3924} 3925 3926static int 3927acpi_parse_interfaces(char *str, struct acpi_interface *iface) 3928{ 3929 char *p; 3930 size_t len; 3931 int i, j; 3932 3933 p = str; 3934 while (isspace(*p) || *p == ',') 3935 p++; 3936 len = strlen(p); 3937 if (len == 0) 3938 return (0); 3939 p = strdup(p, M_TEMP); 3940 for (i = 0; i < len; i++) 3941 if (p[i] == ',') 3942 p[i] = '\0'; 3943 i = j = 0; 3944 while (i < len) 3945 if (isspace(p[i]) || p[i] == '\0') 3946 i++; 3947 else { 3948 i += strlen(p + i) + 1; 3949 j++; 3950 } 3951 if (j == 0) { 3952 free(p, M_TEMP); 3953 return (0); 3954 } 3955 iface->data = malloc(sizeof(*iface->data) * j, M_TEMP, M_WAITOK); 3956 iface->num = j; 3957 i = j = 0; 3958 while (i < len) 3959 if (isspace(p[i]) || p[i] == '\0') 3960 i++; 3961 else { 3962 iface->data[j] = p + i; 3963 i += strlen(p + i) + 1; 3964 j++; 3965 } 3966 3967 return (j); 3968} 3969 3970static void 3971acpi_free_interfaces(struct acpi_interface *iface) 3972{ 3973 3974 free(iface->data[0], M_TEMP); 3975 free(iface->data, M_TEMP); 3976} 3977 3978static void 3979acpi_reset_interfaces(device_t dev) 3980{ 3981 struct acpi_interface list; 3982 ACPI_STATUS status; 3983 int i; 3984 3985 if (acpi_parse_interfaces(acpi_install_interface, &list) > 0) { 3986 for (i = 0; i < list.num; i++) { 3987 status = AcpiInstallInterface(list.data[i]); 3988 if (ACPI_FAILURE(status)) 3989 device_printf(dev, 3990 "failed to install _OSI(\"%s\"): %s\n", 3991 list.data[i], AcpiFormatException(status)); 3992 else if (bootverbose) 3993 device_printf(dev, "installed _OSI(\"%s\")\n", 3994 list.data[i]); 3995 } 3996 acpi_free_interfaces(&list); 3997 } 3998 if (acpi_parse_interfaces(acpi_remove_interface, &list) > 0) { 3999 for (i = 0; i < list.num; i++) { 4000 status = AcpiRemoveInterface(list.data[i]); 4001 if (ACPI_FAILURE(status)) 4002 device_printf(dev, 4003 "failed to remove _OSI(\"%s\"): %s\n", 4004 list.data[i], AcpiFormatException(status)); 4005 else if (bootverbose) 4006 device_printf(dev, "removed _OSI(\"%s\")\n", 4007 list.data[i]); 4008 } 4009 acpi_free_interfaces(&list); 4010 } 4011} 4012 4013static int 4014acpi_pm_func(u_long cmd, void *arg, ...) 4015{ 4016 int state, acpi_state; 4017 int error; 4018 struct acpi_softc *sc; 4019 va_list ap; 4020 4021 error = 0; 4022 switch (cmd) { 4023 case POWER_CMD_SUSPEND: 4024 sc = (struct acpi_softc *)arg; 4025 if (sc == NULL) { 4026 error = EINVAL; 4027 goto out; 4028 } 4029 4030 va_start(ap, arg); 4031 state = va_arg(ap, int); 4032 va_end(ap); 4033 4034 switch (state) { 4035 case POWER_SLEEP_STATE_STANDBY: 4036 acpi_state = sc->acpi_standby_sx; 4037 break; 4038 case POWER_SLEEP_STATE_SUSPEND: 4039 acpi_state = sc->acpi_suspend_sx; 4040 break; 4041 case POWER_SLEEP_STATE_HIBERNATE: 4042 acpi_state = ACPI_STATE_S4; 4043 break; 4044 default: 4045 error = EINVAL; 4046 goto out; 4047 } 4048 4049 if (ACPI_FAILURE(acpi_EnterSleepState(sc, acpi_state))) 4050 error = ENXIO; 4051 break; 4052 default: 4053 error = EINVAL; 4054 goto out; 4055 } 4056 4057out: 4058 return (error); 4059} 4060 4061static void 4062acpi_pm_register(void *arg) 4063{ 4064 if (!cold || resource_disabled("acpi", 0)) 4065 return; 4066 4067 power_pm_register(POWER_PM_TYPE_ACPI, acpi_pm_func, NULL); 4068} 4069 4070SYSINIT(power, SI_SUB_KLD, SI_ORDER_ANY, acpi_pm_register, 0); 4071