1/******************************************************************************* 2 * 3 * Module Name: utresrc - Resource management utilities 4 * 5 ******************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#include <contrib/dev/acpica/include/acpi.h> 45#include <contrib/dev/acpica/include/accommon.h> 46#include <contrib/dev/acpica/include/acresrc.h> 47 48 49#define _COMPONENT ACPI_UTILITIES 50 ACPI_MODULE_NAME ("utresrc") 51 52 53#if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER) 54 55/* 56 * Strings used to decode resource descriptors. 57 * Used by both the disassembler and the debugger resource dump routines 58 */ 59const char *AcpiGbl_BmDecode[] = 60{ 61 "NotBusMaster", 62 "BusMaster" 63}; 64 65const char *AcpiGbl_ConfigDecode[] = 66{ 67 "0 - Good Configuration", 68 "1 - Acceptable Configuration", 69 "2 - Suboptimal Configuration", 70 "3 - ***Invalid Configuration***", 71}; 72 73const char *AcpiGbl_ConsumeDecode[] = 74{ 75 "ResourceProducer", 76 "ResourceConsumer" 77}; 78 79const char *AcpiGbl_DecDecode[] = 80{ 81 "PosDecode", 82 "SubDecode" 83}; 84 85const char *AcpiGbl_HeDecode[] = 86{ 87 "Level", 88 "Edge" 89}; 90 91const char *AcpiGbl_IoDecode[] = 92{ 93 "Decode10", 94 "Decode16" 95}; 96 97const char *AcpiGbl_LlDecode[] = 98{ 99 "ActiveHigh", 100 "ActiveLow", 101 "ActiveBoth", 102 "Reserved" 103}; 104 105const char *AcpiGbl_MaxDecode[] = 106{ 107 "MaxNotFixed", 108 "MaxFixed" 109}; 110 111const char *AcpiGbl_MemDecode[] = 112{ 113 "NonCacheable", 114 "Cacheable", 115 "WriteCombining", 116 "Prefetchable" 117}; 118 119const char *AcpiGbl_MinDecode[] = 120{ 121 "MinNotFixed", 122 "MinFixed" 123}; 124 125const char *AcpiGbl_MtpDecode[] = 126{ 127 "AddressRangeMemory", 128 "AddressRangeReserved", 129 "AddressRangeACPI", 130 "AddressRangeNVS" 131}; 132 133const char *AcpiGbl_RngDecode[] = 134{ 135 "InvalidRanges", 136 "NonISAOnlyRanges", 137 "ISAOnlyRanges", 138 "EntireRange" 139}; 140 141const char *AcpiGbl_RwDecode[] = 142{ 143 "ReadOnly", 144 "ReadWrite" 145}; 146 147const char *AcpiGbl_ShrDecode[] = 148{ 149 "Exclusive", 150 "Shared", 151 "ExclusiveAndWake", /* ACPI 5.0 */ 152 "SharedAndWake" /* ACPI 5.0 */ 153}; 154 155const char *AcpiGbl_SizDecode[] = 156{ 157 "Transfer8", 158 "Transfer8_16", 159 "Transfer16", 160 "InvalidSize" 161}; 162 163const char *AcpiGbl_TrsDecode[] = 164{ 165 "DenseTranslation", 166 "SparseTranslation" 167}; 168 169const char *AcpiGbl_TtpDecode[] = 170{ 171 "TypeStatic", 172 "TypeTranslation" 173}; 174 175const char *AcpiGbl_TypDecode[] = 176{ 177 "Compatibility", 178 "TypeA", 179 "TypeB", 180 "TypeF" 181}; 182 183const char *AcpiGbl_PpcDecode[] = 184{ 185 "PullDefault", 186 "PullUp", 187 "PullDown", 188 "PullNone" 189}; 190 191const char *AcpiGbl_IorDecode[] = 192{ 193 "IoRestrictionNone", 194 "IoRestrictionInputOnly", 195 "IoRestrictionOutputOnly", 196 "IoRestrictionNoneAndPreserve" 197}; 198 199const char *AcpiGbl_DtsDecode[] = 200{ 201 "Width8bit", 202 "Width16bit", 203 "Width32bit", 204 "Width64bit", 205 "Width128bit", 206 "Width256bit", 207}; 208 209/* GPIO connection type */ 210 211const char *AcpiGbl_CtDecode[] = 212{ 213 "Interrupt", 214 "I/O" 215}; 216 217/* Serial bus type */ 218 219const char *AcpiGbl_SbtDecode[] = 220{ 221 "/* UNKNOWN serial bus type */", 222 "I2C", 223 "SPI", 224 "UART" 225}; 226 227/* I2C serial bus access mode */ 228 229const char *AcpiGbl_AmDecode[] = 230{ 231 "AddressingMode7Bit", 232 "AddressingMode10Bit" 233}; 234 235/* I2C serial bus slave mode */ 236 237const char *AcpiGbl_SmDecode[] = 238{ 239 "ControllerInitiated", 240 "DeviceInitiated" 241}; 242 243/* SPI serial bus wire mode */ 244 245const char *AcpiGbl_WmDecode[] = 246{ 247 "FourWireMode", 248 "ThreeWireMode" 249}; 250 251/* SPI serial clock phase */ 252 253const char *AcpiGbl_CphDecode[] = 254{ 255 "ClockPhaseFirst", 256 "ClockPhaseSecond" 257}; 258 259/* SPI serial bus clock polarity */ 260 261const char *AcpiGbl_CpoDecode[] = 262{ 263 "ClockPolarityLow", 264 "ClockPolarityHigh" 265}; 266 267/* SPI serial bus device polarity */ 268 269const char *AcpiGbl_DpDecode[] = 270{ 271 "PolarityLow", 272 "PolarityHigh" 273}; 274 275/* UART serial bus endian */ 276 277const char *AcpiGbl_EdDecode[] = 278{ 279 "LittleEndian", 280 "BigEndian" 281}; 282 283/* UART serial bus bits per byte */ 284 285const char *AcpiGbl_BpbDecode[] = 286{ 287 "DataBitsFive", 288 "DataBitsSix", 289 "DataBitsSeven", 290 "DataBitsEight", 291 "DataBitsNine", 292 "/* UNKNOWN Bits per byte */", 293 "/* UNKNOWN Bits per byte */", 294 "/* UNKNOWN Bits per byte */" 295}; 296 297/* UART serial bus stop bits */ 298 299const char *AcpiGbl_SbDecode[] = 300{ 301 "StopBitsZero", 302 "StopBitsOne", 303 "StopBitsOnePlusHalf", 304 "StopBitsTwo" 305}; 306 307/* UART serial bus flow control */ 308 309const char *AcpiGbl_FcDecode[] = 310{ 311 "FlowControlNone", 312 "FlowControlHardware", 313 "FlowControlXON", 314 "/* UNKNOWN flow control keyword */" 315}; 316 317/* UART serial bus parity type */ 318 319const char *AcpiGbl_PtDecode[] = 320{ 321 "ParityTypeNone", 322 "ParityTypeEven", 323 "ParityTypeOdd", 324 "ParityTypeMark", 325 "ParityTypeSpace", 326 "/* UNKNOWN parity keyword */", 327 "/* UNKNOWN parity keyword */", 328 "/* UNKNOWN parity keyword */" 329}; 330 331#endif 332 333 334/* 335 * Base sizes of the raw AML resource descriptors, indexed by resource type. 336 * Zero indicates a reserved (and therefore invalid) resource type. 337 */ 338const UINT8 AcpiGbl_ResourceAmlSizes[] = 339{ 340 /* Small descriptors */ 341 342 0, 343 0, 344 0, 345 0, 346 ACPI_AML_SIZE_SMALL (AML_RESOURCE_IRQ), 347 ACPI_AML_SIZE_SMALL (AML_RESOURCE_DMA), 348 ACPI_AML_SIZE_SMALL (AML_RESOURCE_START_DEPENDENT), 349 ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_DEPENDENT), 350 ACPI_AML_SIZE_SMALL (AML_RESOURCE_IO), 351 ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_IO), 352 ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_DMA), 353 0, 354 0, 355 0, 356 ACPI_AML_SIZE_SMALL (AML_RESOURCE_VENDOR_SMALL), 357 ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_TAG), 358 359 /* Large descriptors */ 360 361 0, 362 ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY24), 363 ACPI_AML_SIZE_LARGE (AML_RESOURCE_GENERIC_REGISTER), 364 0, 365 ACPI_AML_SIZE_LARGE (AML_RESOURCE_VENDOR_LARGE), 366 ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY32), 367 ACPI_AML_SIZE_LARGE (AML_RESOURCE_FIXED_MEMORY32), 368 ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS32), 369 ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS16), 370 ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_IRQ), 371 ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS64), 372 ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64), 373 ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO), 374 0, 375 ACPI_AML_SIZE_LARGE (AML_RESOURCE_COMMON_SERIALBUS), 376}; 377 378const UINT8 AcpiGbl_ResourceAmlSerialBusSizes[] = 379{ 380 0, 381 ACPI_AML_SIZE_LARGE (AML_RESOURCE_I2C_SERIALBUS), 382 ACPI_AML_SIZE_LARGE (AML_RESOURCE_SPI_SERIALBUS), 383 ACPI_AML_SIZE_LARGE (AML_RESOURCE_UART_SERIALBUS), 384}; 385 386 387/* 388 * Resource types, used to validate the resource length field. 389 * The length of fixed-length types must match exactly, variable 390 * lengths must meet the minimum required length, etc. 391 * Zero indicates a reserved (and therefore invalid) resource type. 392 */ 393static const UINT8 AcpiGbl_ResourceTypes[] = 394{ 395 /* Small descriptors */ 396 397 0, 398 0, 399 0, 400 0, 401 ACPI_SMALL_VARIABLE_LENGTH, /* 04 IRQ */ 402 ACPI_FIXED_LENGTH, /* 05 DMA */ 403 ACPI_SMALL_VARIABLE_LENGTH, /* 06 StartDependentFunctions */ 404 ACPI_FIXED_LENGTH, /* 07 EndDependentFunctions */ 405 ACPI_FIXED_LENGTH, /* 08 IO */ 406 ACPI_FIXED_LENGTH, /* 09 FixedIO */ 407 ACPI_FIXED_LENGTH, /* 0A FixedDMA */ 408 0, 409 0, 410 0, 411 ACPI_VARIABLE_LENGTH, /* 0E VendorShort */ 412 ACPI_FIXED_LENGTH, /* 0F EndTag */ 413 414 /* Large descriptors */ 415 416 0, 417 ACPI_FIXED_LENGTH, /* 01 Memory24 */ 418 ACPI_FIXED_LENGTH, /* 02 GenericRegister */ 419 0, 420 ACPI_VARIABLE_LENGTH, /* 04 VendorLong */ 421 ACPI_FIXED_LENGTH, /* 05 Memory32 */ 422 ACPI_FIXED_LENGTH, /* 06 Memory32Fixed */ 423 ACPI_VARIABLE_LENGTH, /* 07 Dword* address */ 424 ACPI_VARIABLE_LENGTH, /* 08 Word* address */ 425 ACPI_VARIABLE_LENGTH, /* 09 ExtendedIRQ */ 426 ACPI_VARIABLE_LENGTH, /* 0A Qword* address */ 427 ACPI_FIXED_LENGTH, /* 0B Extended* address */ 428 ACPI_VARIABLE_LENGTH, /* 0C Gpio* */ 429 0, 430 ACPI_VARIABLE_LENGTH /* 0E *SerialBus */ 431}; 432 433 434/******************************************************************************* 435 * 436 * FUNCTION: AcpiUtWalkAmlResources 437 * 438 * PARAMETERS: WalkState - Current walk info 439 * PARAMETERS: Aml - Pointer to the raw AML resource template 440 * AmlLength - Length of the entire template 441 * UserFunction - Called once for each descriptor found. If 442 * NULL, a pointer to the EndTag is returned 443 * Context - Passed to UserFunction 444 * 445 * RETURN: Status 446 * 447 * DESCRIPTION: Walk a raw AML resource list(buffer). User function called 448 * once for each resource found. 449 * 450 ******************************************************************************/ 451 452ACPI_STATUS 453AcpiUtWalkAmlResources ( 454 ACPI_WALK_STATE *WalkState, 455 UINT8 *Aml, 456 ACPI_SIZE AmlLength, 457 ACPI_WALK_AML_CALLBACK UserFunction, 458 void **Context) 459{ 460 ACPI_STATUS Status; 461 UINT8 *EndAml; 462 UINT8 ResourceIndex; 463 UINT32 Length; 464 UINT32 Offset = 0; 465 UINT8 EndTag[2] = {0x79, 0x00}; 466 467 468 ACPI_FUNCTION_TRACE (UtWalkAmlResources); 469 470 471 /* The absolute minimum resource template is one EndTag descriptor */ 472 473 if (AmlLength < sizeof (AML_RESOURCE_END_TAG)) 474 { 475 return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); 476 } 477 478 /* Point to the end of the resource template buffer */ 479 480 EndAml = Aml + AmlLength; 481 482 /* Walk the byte list, abort on any invalid descriptor type or length */ 483 484 while (Aml < EndAml) 485 { 486 /* Validate the Resource Type and Resource Length */ 487 488 Status = AcpiUtValidateResource (WalkState, Aml, &ResourceIndex); 489 if (ACPI_FAILURE (Status)) 490 { 491 /* 492 * Exit on failure. Cannot continue because the descriptor 493 * length may be bogus also. 494 */ 495 return_ACPI_STATUS (Status); 496 } 497 498 /* Get the length of this descriptor */ 499 500 Length = AcpiUtGetDescriptorLength (Aml); 501 502 /* Invoke the user function */ 503 504 if (UserFunction) 505 { 506 Status = UserFunction ( 507 Aml, Length, Offset, ResourceIndex, Context); 508 if (ACPI_FAILURE (Status)) 509 { 510 return_ACPI_STATUS (Status); 511 } 512 } 513 514 /* An EndTag descriptor terminates this resource template */ 515 516 if (AcpiUtGetResourceType (Aml) == ACPI_RESOURCE_NAME_END_TAG) 517 { 518 /* 519 * There must be at least one more byte in the buffer for 520 * the 2nd byte of the EndTag 521 */ 522 if ((Aml + 1) >= EndAml) 523 { 524 return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); 525 } 526 527 /* Return the pointer to the EndTag if requested */ 528 529 if (!UserFunction) 530 { 531 *Context = Aml; 532 } 533 534 /* Normal exit */ 535 536 return_ACPI_STATUS (AE_OK); 537 } 538 539 Aml += Length; 540 Offset += Length; 541 } 542 543 /* Did not find an EndTag descriptor */ 544 545 if (UserFunction) 546 { 547 /* Insert an EndTag anyway. AcpiRsGetListLength always leaves room */ 548 549 (void) AcpiUtValidateResource (WalkState, EndTag, &ResourceIndex); 550 Status = UserFunction (EndTag, 2, Offset, ResourceIndex, Context); 551 if (ACPI_FAILURE (Status)) 552 { 553 return_ACPI_STATUS (Status); 554 } 555 } 556 557 return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); 558} 559 560 561/******************************************************************************* 562 * 563 * FUNCTION: AcpiUtValidateResource 564 * 565 * PARAMETERS: WalkState - Current walk info 566 * Aml - Pointer to the raw AML resource descriptor 567 * ReturnIndex - Where the resource index is returned. NULL 568 * if the index is not required. 569 * 570 * RETURN: Status, and optionally the Index into the global resource tables 571 * 572 * DESCRIPTION: Validate an AML resource descriptor by checking the Resource 573 * Type and Resource Length. Returns an index into the global 574 * resource information/dispatch tables for later use. 575 * 576 ******************************************************************************/ 577 578ACPI_STATUS 579AcpiUtValidateResource ( 580 ACPI_WALK_STATE *WalkState, 581 void *Aml, 582 UINT8 *ReturnIndex) 583{ 584 AML_RESOURCE *AmlResource; 585 UINT8 ResourceType; 586 UINT8 ResourceIndex; 587 ACPI_RS_LENGTH ResourceLength; 588 ACPI_RS_LENGTH MinimumResourceLength; 589 590 591 ACPI_FUNCTION_ENTRY (); 592 593 594 /* 595 * 1) Validate the ResourceType field (Byte 0) 596 */ 597 ResourceType = ACPI_GET8 (Aml); 598 599 /* 600 * Byte 0 contains the descriptor name (Resource Type) 601 * Examine the large/small bit in the resource header 602 */ 603 if (ResourceType & ACPI_RESOURCE_NAME_LARGE) 604 { 605 /* Verify the large resource type (name) against the max */ 606 607 if (ResourceType > ACPI_RESOURCE_NAME_LARGE_MAX) 608 { 609 goto InvalidResource; 610 } 611 612 /* 613 * Large Resource Type -- bits 6:0 contain the name 614 * Translate range 0x80-0x8B to index range 0x10-0x1B 615 */ 616 ResourceIndex = (UINT8) (ResourceType - 0x70); 617 } 618 else 619 { 620 /* 621 * Small Resource Type -- bits 6:3 contain the name 622 * Shift range to index range 0x00-0x0F 623 */ 624 ResourceIndex = (UINT8) 625 ((ResourceType & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3); 626 } 627 628 /* 629 * Check validity of the resource type, via AcpiGbl_ResourceTypes. 630 * Zero indicates an invalid resource. 631 */ 632 if (!AcpiGbl_ResourceTypes[ResourceIndex]) 633 { 634 goto InvalidResource; 635 } 636 637 /* 638 * Validate the ResourceLength field. This ensures that the length 639 * is at least reasonable, and guarantees that it is non-zero. 640 */ 641 ResourceLength = AcpiUtGetResourceLength (Aml); 642 MinimumResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex]; 643 644 /* Validate based upon the type of resource - fixed length or variable */ 645 646 switch (AcpiGbl_ResourceTypes[ResourceIndex]) 647 { 648 case ACPI_FIXED_LENGTH: 649 650 /* Fixed length resource, length must match exactly */ 651 652 if (ResourceLength != MinimumResourceLength) 653 { 654 goto BadResourceLength; 655 } 656 break; 657 658 case ACPI_VARIABLE_LENGTH: 659 660 /* Variable length resource, length must be at least the minimum */ 661 662 if (ResourceLength < MinimumResourceLength) 663 { 664 goto BadResourceLength; 665 } 666 break; 667 668 case ACPI_SMALL_VARIABLE_LENGTH: 669 670 /* Small variable length resource, length can be (Min) or (Min-1) */ 671 672 if ((ResourceLength > MinimumResourceLength) || 673 (ResourceLength < (MinimumResourceLength - 1))) 674 { 675 goto BadResourceLength; 676 } 677 break; 678 679 default: 680 681 /* Shouldn't happen (because of validation earlier), but be sure */ 682 683 goto InvalidResource; 684 } 685 686 AmlResource = ACPI_CAST_PTR (AML_RESOURCE, Aml); 687 if (ResourceType == ACPI_RESOURCE_NAME_SERIAL_BUS) 688 { 689 /* Validate the BusType field */ 690 691 if ((AmlResource->CommonSerialBus.Type == 0) || 692 (AmlResource->CommonSerialBus.Type > AML_RESOURCE_MAX_SERIALBUSTYPE)) 693 { 694 if (WalkState) 695 { 696 ACPI_ERROR ((AE_INFO, 697 "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X", 698 AmlResource->CommonSerialBus.Type)); 699 } 700 return (AE_AML_INVALID_RESOURCE_TYPE); 701 } 702 } 703 704 /* Optionally return the resource table index */ 705 706 if (ReturnIndex) 707 { 708 *ReturnIndex = ResourceIndex; 709 } 710 711 return (AE_OK); 712 713 714InvalidResource: 715 716 if (WalkState) 717 { 718 ACPI_ERROR ((AE_INFO, 719 "Invalid/unsupported resource descriptor: Type 0x%2.2X", 720 ResourceType)); 721 } 722 return (AE_AML_INVALID_RESOURCE_TYPE); 723 724BadResourceLength: 725 726 if (WalkState) 727 { 728 ACPI_ERROR ((AE_INFO, 729 "Invalid resource descriptor length: Type " 730 "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X", 731 ResourceType, ResourceLength, MinimumResourceLength)); 732 } 733 return (AE_AML_BAD_RESOURCE_LENGTH); 734} 735 736 737/******************************************************************************* 738 * 739 * FUNCTION: AcpiUtGetResourceType 740 * 741 * PARAMETERS: Aml - Pointer to the raw AML resource descriptor 742 * 743 * RETURN: The Resource Type with no extraneous bits (except the 744 * Large/Small descriptor bit -- this is left alone) 745 * 746 * DESCRIPTION: Extract the Resource Type/Name from the first byte of 747 * a resource descriptor. 748 * 749 ******************************************************************************/ 750 751UINT8 752AcpiUtGetResourceType ( 753 void *Aml) 754{ 755 ACPI_FUNCTION_ENTRY (); 756 757 758 /* 759 * Byte 0 contains the descriptor name (Resource Type) 760 * Examine the large/small bit in the resource header 761 */ 762 if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE) 763 { 764 /* Large Resource Type -- bits 6:0 contain the name */ 765 766 return (ACPI_GET8 (Aml)); 767 } 768 else 769 { 770 /* Small Resource Type -- bits 6:3 contain the name */ 771 772 return ((UINT8) (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_SMALL_MASK)); 773 } 774} 775 776 777/******************************************************************************* 778 * 779 * FUNCTION: AcpiUtGetResourceLength 780 * 781 * PARAMETERS: Aml - Pointer to the raw AML resource descriptor 782 * 783 * RETURN: Byte Length 784 * 785 * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By 786 * definition, this does not include the size of the descriptor 787 * header or the length field itself. 788 * 789 ******************************************************************************/ 790 791UINT16 792AcpiUtGetResourceLength ( 793 void *Aml) 794{ 795 ACPI_RS_LENGTH ResourceLength; 796 797 798 ACPI_FUNCTION_ENTRY (); 799 800 801 /* 802 * Byte 0 contains the descriptor name (Resource Type) 803 * Examine the large/small bit in the resource header 804 */ 805 if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE) 806 { 807 /* Large Resource type -- bytes 1-2 contain the 16-bit length */ 808 809 ACPI_MOVE_16_TO_16 (&ResourceLength, ACPI_ADD_PTR (UINT8, Aml, 1)); 810 811 } 812 else 813 { 814 /* Small Resource type -- bits 2:0 of byte 0 contain the length */ 815 816 ResourceLength = (UINT16) (ACPI_GET8 (Aml) & 817 ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK); 818 } 819 820 return (ResourceLength); 821} 822 823 824/******************************************************************************* 825 * 826 * FUNCTION: AcpiUtGetResourceHeaderLength 827 * 828 * PARAMETERS: Aml - Pointer to the raw AML resource descriptor 829 * 830 * RETURN: Length of the AML header (depends on large/small descriptor) 831 * 832 * DESCRIPTION: Get the length of the header for this resource. 833 * 834 ******************************************************************************/ 835 836UINT8 837AcpiUtGetResourceHeaderLength ( 838 void *Aml) 839{ 840 ACPI_FUNCTION_ENTRY (); 841 842 843 /* Examine the large/small bit in the resource header */ 844 845 if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE) 846 { 847 return (sizeof (AML_RESOURCE_LARGE_HEADER)); 848 } 849 else 850 { 851 return (sizeof (AML_RESOURCE_SMALL_HEADER)); 852 } 853} 854 855 856/******************************************************************************* 857 * 858 * FUNCTION: AcpiUtGetDescriptorLength 859 * 860 * PARAMETERS: Aml - Pointer to the raw AML resource descriptor 861 * 862 * RETURN: Byte length 863 * 864 * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the 865 * length of the descriptor header and the length field itself. 866 * Used to walk descriptor lists. 867 * 868 ******************************************************************************/ 869 870UINT32 871AcpiUtGetDescriptorLength ( 872 void *Aml) 873{ 874 ACPI_FUNCTION_ENTRY (); 875 876 877 /* 878 * Get the Resource Length (does not include header length) and add 879 * the header length (depends on if this is a small or large resource) 880 */ 881 return (AcpiUtGetResourceLength (Aml) + 882 AcpiUtGetResourceHeaderLength (Aml)); 883} 884 885 886/******************************************************************************* 887 * 888 * FUNCTION: AcpiUtGetResourceEndTag 889 * 890 * PARAMETERS: ObjDesc - The resource template buffer object 891 * EndTag - Where the pointer to the EndTag is returned 892 * 893 * RETURN: Status, pointer to the end tag 894 * 895 * DESCRIPTION: Find the EndTag resource descriptor in an AML resource template 896 * Note: allows a buffer length of zero. 897 * 898 ******************************************************************************/ 899 900ACPI_STATUS 901AcpiUtGetResourceEndTag ( 902 ACPI_OPERAND_OBJECT *ObjDesc, 903 UINT8 **EndTag) 904{ 905 ACPI_STATUS Status; 906 907 908 ACPI_FUNCTION_TRACE (UtGetResourceEndTag); 909 910 911 /* Allow a buffer length of zero */ 912 913 if (!ObjDesc->Buffer.Length) 914 { 915 *EndTag = ObjDesc->Buffer.Pointer; 916 return_ACPI_STATUS (AE_OK); 917 } 918 919 /* Validate the template and get a pointer to the EndTag */ 920 921 Status = AcpiUtWalkAmlResources (NULL, ObjDesc->Buffer.Pointer, 922 ObjDesc->Buffer.Length, NULL, (void **) EndTag); 923 924 return_ACPI_STATUS (Status); 925} 926