digi-ccwmx53.dts revision 266362
1/* 2 * Copyright (c) 2012 The FreeBSD Foundation 3 * Copyright (c) 2013 Rui Paulo 4 * All rights reserved. 5 * 6 * This software was developed by Semihalf under sponsorship from 7 * the FreeBSD Foundation. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Digi ConnectCore Wi-i.MX53 31 * 32 * $FreeBSD: stable/10/sys/boot/fdt/dts/arm/digi-ccwmx53.dts 266362 2014-05-17 21:46:25Z ian $ 33 */ 34 35/dts-v1/; 36/include/ "imx53x.dtsi" 37 38/ { 39 model = "Digi ConnectCore Wi-i.MX53"; 40 compatible = "digi,imx53-ccwm53"; 41 42 memory { 43 /* RAM 512M */ 44 reg = <0x70000000 0x10000000 45 0xB0000000 0x10000000>; 46 }; 47 48 localbus@18000000 { 49 ipu3@18000000 { 50 status = "okay"; 51 }; 52 }; 53 54 soc@50000000 { 55 aips@50000000 { 56 spba@50000000 { 57 esdhc@50004000 { 58 clock-frequency = <216000000>; 59 status = "okay"; 60 }; 61 esdhc@50008000 { 62 clock-frequency = <216000000>; 63 status = "okay"; 64 }; 65 SSI2: ssi@50014000 { 66 status = "okay"; 67 }; 68 }; 69 timer@53fa0000 { 70 status = "okay"; 71 }; 72 73 /* UART1, console */ 74 console: serial@53fbc000 { 75 status = "okay"; 76 clock-frequency = <0>; /* won't load w/o this */ 77 }; 78 79 clock@53fd4000 { 80 status = "okay"; 81 }; 82 gpio@53f84000 { 83 status = "okay"; 84 }; 85 gpio@53f88000 { 86 status = "okay"; 87 }; 88 gpio@53f8c000 { 89 status = "okay"; 90 }; 91 gpio@53f90000 { 92 status = "okay"; 93 }; 94 usb@53f80000 /* OTG */ { 95 status = "okay"; 96 }; 97 usb@53f80200 /* Host 1 */ { 98 status = "okay"; 99 }; 100 wdog@53f98000 { 101 status = "okay"; 102 }; 103 }; 104 aips@60000000 { 105 ethernet@63fec000 { 106 status = "okay"; 107 phy-mode = "rmii"; 108 }; 109 i2c@63fc4000 { 110 status = "okay"; 111 }; 112 i2c@63fc8000 { 113 status = "okay"; 114 }; 115 audmux@63fd4000 { 116 status = "okay"; 117 }; 118 ide@63fe0000 { 119 status = "okay"; 120 }; 121 }; 122 }; 123 124 aliases { 125 SSI2 = &SSI2; 126 }; 127 128 chosen { 129 bootargs = "-v"; 130 stdin = &console; 131 stdout = &console; 132 }; 133}; 134