1/* 2 * Copyright (c) 2012 The FreeBSD Foundation 3 * Copyright (c) 2013 Rui Paulo 4 * All rights reserved. 5 * 6 * This software was developed by Semihalf under sponsorship from 7 * the FreeBSD Foundation. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Digi ConnectCore Wi-i.MX53 31 * 32 * $FreeBSD$ 33 */ 34 35/dts-v1/; 36/include/ "imx53x.dtsi" 37 38/ { 39 model = "Digi ConnectCore Wi-i.MX53"; 40 compatible = "digi,imx53-ccwm53"; 41 42 memory { 43 /* RAM 512M */ 44 reg = <0x70000000 0x10000000 45 0xB0000000 0x10000000>; 46 }; 47 48 localbus@10000000 { 49 sata@10000000 { 50 status = "okay"; 51 }; 52 ipu3@1E000000 { 53 status = "okay"; 54 }; 55 }; 56 57 soc@50000000 { 58 aips@50000000 { 59 spba@50000000 { 60 esdhc@50004000 { 61 clock-frequency = <216000000>; 62 status = "okay"; 63 }; 64 esdhc@50008000 { 65 clock-frequency = <216000000>; 66 status = "okay"; 67 }; 68 SSI2: ssi@50014000 { 69 status = "okay"; 70 }; 71 }; 72 timer@53fa0000 { 73 status = "okay"; 74 }; 75 /* UART1, console */ 76 console: serial@53fbc000 { 77 status = "okay"; 78 clock-frequency = <0>; /* won't load w/o this */ 79 }; 80 serial@53fc0000 { 81 status = "okay"; 82 clock-frequency = <0>; /* won't load w/o this */ 83 }; 84 serial@53ff0000 { 85 status = "okay"; 86 clock-frequency = <0>; /* won't load w/o this */ 87 }; 88 clock@53fd4000 { 89 status = "okay"; 90 }; 91 gpio@53f84000 { 92 status = "okay"; 93 }; 94 gpio@53f88000 { 95 status = "okay"; 96 }; 97 gpio@53f8c000 { 98 status = "okay"; 99 }; 100 gpio@53f90000 { 101 status = "okay"; 102 }; 103 usb@53f80000 /* OTG */ { 104 status = "okay"; 105 }; 106 usb@53f80200 /* Host 1 */ { 107 status = "okay"; 108 }; 109 wdog@53f98000 { 110 status = "okay"; 111 }; 112 i2c@53fec000 { 113 status = "okay"; 114 rtc@68 { 115 compatible = "dialog,ds9052"; 116 reg = <0x48>; 117 interrupts = <0x1 0x1 0 0>; 118 }; 119 }; 120 }; 121 aips@60000000 { 122 ethernet@63fec000 { 123 status = "okay"; 124 phy-mode = "rmii"; 125 }; 126 i2c@63fc4000 { 127 status = "okay"; 128 }; 129 i2c@63fc8000 { 130 status = "okay"; 131 }; 132 audmux@63fd4000 { 133 status = "okay"; 134 }; 135 ide@63fe0000 { 136 status = "okay"; 137 }; 138 serial@63f90000 { 139 status = "okay"; 140 }; 141 }; 142 }; 143 144 aliases { 145 SSI2 = &SSI2; 146 }; 147 148 chosen { 149 bootargs = "-v"; 150 stdin = &console; 151 stdout = &console; 152 }; 153}; 154