1/* 2 * Copyright (c) 2013 ETH Zurich. All rights reserved. 3 * 4 * This file is distributed under the terms in the attached LICENSE file. 5 * If you do not find this file, copies can be found by writing to: 6 * ETH Zurich D-INFK, CAB F.78, Universitaetstr. 6, CH-8092 Zurich, 7 * Attn: Systems Group. 8 */ 9 10/* 11 * omap44xx_per_ap.dev 12 * 13 * DESCRIPTION: 14 * 15 * NOTE: This file has been automatically generated based on the 16 * XML files extracted from the TI RDT v1.0.0.4p Tool. 17 * Download from here: http://www.ti.com/product/omap4460 18 * This means that the file might not be optimal in terms of naming 19 * conventions for constants and registers (duplicated 20 * namespaces in register and device name etc.). 21 * Also, because of the underlying structure from the original XML 22 * it's possible that some constants appear multiple times (if they 23 * have slightly different descriptions for example). 24 * 25 * You want to clean that up before using the files for the first time! 26 */ 27 28device omap44xx_per_ap msbfirst ( addr base ) "" { 29 30 31 register l4_ap_component_l addr(base, 0x0) "Contains a component code and revision, which are used to identify the hardware of the component." { 32 code 16 ro "Interconnect code"; 33 rev 16 ro "Component revision code"; 34 }; 35 36 register l4_ap_component_h ro addr(base, 0x4) "Contains a component code and revision, which are used to identify the hardware of the component." type(uint32); 37 38 register l4_ap_segment_i_l_0 addr(base, 0x100) "Define the base address of each segments" { 39 _ 8 mbz; 40 base 24 ro "The base address of the segment (with 0s from bit 0 to bit SIZE-1)."; 41 }; 42 43 register l4_ap_segment_i_l_1 addr(base, 0x108) "Define the base address of each segments" { 44 _ 8 mbz; 45 base 24 ro "The base address of the segment (with 0s from bit 0 to bit SIZE-1)."; 46 }; 47 48 register l4_ap_segment_i_h_0 addr(base, 0x104) "Define the size of each segments" { 49 _ 27 mbz; 50 size 5 ro "Segment size is a power of 2, where 2 is the byte size of a segment (all segment registers use the same size)."; 51 }; 52 53 register l4_ap_segment_i_h_1 addr(base, 0x10C) "Define the size of each segments" { 54 _ 27 mbz; 55 size 5 ro "Segment size is a power of 2, where 2 is the byte size of a segment (all segment registers use the same size)."; 56 }; 57 58 register l4_ap_prot_group_members_k_l_0 addr(base, 0x200) "Define ConnID bit vectors for a protection group." { 59 _ 16 mbz; 60 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 61 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 62 _ 1 rsvd; 63 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 64 _ 1 rsvd; 65 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 66 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 67 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 68 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 69 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 70 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 71 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 72 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 73 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 74 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 75 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 76 }; 77 78 register l4_ap_prot_group_members_k_l_1 addr(base, 0x208) "Define ConnID bit vectors for a protection group." { 79 _ 16 mbz; 80 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 81 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 82 _ 1 rsvd; 83 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 84 _ 1 rsvd; 85 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 86 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 87 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 88 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 89 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 90 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 91 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 92 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 93 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 94 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 95 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 96 }; 97 98 register l4_ap_prot_group_members_k_l_2 addr(base, 0x210) "Define ConnID bit vectors for a protection group." { 99 _ 16 mbz; 100 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 101 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 102 _ 1 rsvd; 103 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 104 _ 1 rsvd; 105 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 106 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 107 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 108 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 109 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 110 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 111 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 112 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 113 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 114 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 115 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 116 }; 117 118 register l4_ap_prot_group_members_k_l_3 addr(base, 0x218) "Define ConnID bit vectors for a protection group." { 119 _ 16 mbz; 120 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 121 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 122 _ 1 rsvd; 123 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 124 _ 1 rsvd; 125 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 126 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 127 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 128 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 129 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 130 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 131 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 132 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 133 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 134 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 135 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 136 }; 137 138 register l4_ap_prot_group_members_k_l_4 addr(base, 0x220) "Define ConnID bit vectors for a protection group." { 139 _ 16 mbz; 140 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 141 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 142 _ 1 rsvd; 143 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 144 _ 1 rsvd; 145 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 146 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 147 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 148 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 149 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 150 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 151 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 152 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 153 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 154 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 155 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 156 }; 157 158 register l4_ap_prot_group_members_k_l_5 addr(base, 0x228) "Define ConnID bit vectors for a protection group." { 159 _ 16 mbz; 160 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 161 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 162 _ 1 rsvd; 163 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 164 _ 1 rsvd; 165 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 166 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 167 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 168 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 169 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 170 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 171 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 172 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 173 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 174 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 175 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 176 }; 177 178 register l4_ap_prot_group_members_k_l_6 addr(base, 0x230) "Define ConnID bit vectors for a protection group." { 179 _ 16 mbz; 180 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 181 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 182 _ 1 rsvd; 183 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 184 _ 1 rsvd; 185 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 186 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 187 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 188 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 189 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 190 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 191 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 192 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 193 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 194 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 195 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 196 }; 197 198 register l4_ap_prot_group_members_k_l_7 addr(base, 0x238) "Define ConnID bit vectors for a protection group." { 199 _ 16 mbz; 200 dmm_page_table_walk 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 201 perf_probe 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 202 _ 1 rsvd; 203 hs_usb_host_usb 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 204 _ 1 rsvd; 205 mmc1_mmc2 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 206 hsi 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 207 c2c 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 208 dss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 209 sgx 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 210 sdma 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 211 cam_cortexa9_mpu_ss_face_detect 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 212 iva_hd 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 213 dsp_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 214 dap 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 215 cortexm3_mpu_ss 1 rw "Included in the protection group k0x0: Not a member0x1: Member"; 216 }; 217 218 register l4_ap_prot_group_members_k_h_0 ro addr(base, 0x204) "Define ConnID bit vectors for a protection group." type(uint32); 219 220 register l4_ap_prot_group_members_k_h_1 ro addr(base, 0x20C) "Define ConnID bit vectors for a protection group." type(uint32); 221 222 register l4_ap_prot_group_members_k_h_2 ro addr(base, 0x214) "Define ConnID bit vectors for a protection group." type(uint32); 223 224 register l4_ap_prot_group_members_k_h_3 ro addr(base, 0x21C) "Define ConnID bit vectors for a protection group." type(uint32); 225 226 register l4_ap_prot_group_members_k_h_4 ro addr(base, 0x224) "Define ConnID bit vectors for a protection group." type(uint32); 227 228 register l4_ap_prot_group_members_k_h_5 ro addr(base, 0x22C) "Define ConnID bit vectors for a protection group." type(uint32); 229 230 register l4_ap_prot_group_members_k_h_6 ro addr(base, 0x234) "Define ConnID bit vectors for a protection group." type(uint32); 231 232 register l4_ap_prot_group_members_k_h_7 ro addr(base, 0x23C) "Define ConnID bit vectors for a protection group." type(uint32); 233 234 register l4_ap_prot_group_roles_k_l_0 addr(base, 0x280) "Define MReqInfo bit vectors for a protection group." { 235 _ 16 mbz; 236 enable 16 ro "Setting of type acces allowed for the group of initiators."; 237 }; 238 239 register l4_ap_prot_group_roles_k_l_1 addr(base, 0x288) "Define MReqInfo bit vectors for a protection group." { 240 _ 16 mbz; 241 enable 16 ro "Setting of type acces allowed for the group of initiators."; 242 }; 243 244 register l4_ap_prot_group_roles_k_l_2 addr(base, 0x290) "Define MReqInfo bit vectors for a protection group." { 245 _ 16 mbz; 246 enable 16 ro "Setting of type acces allowed for the group of initiators."; 247 }; 248 249 register l4_ap_prot_group_roles_k_l_3 addr(base, 0x298) "Define MReqInfo bit vectors for a protection group." { 250 _ 16 mbz; 251 enable 16 ro "Setting of type acces allowed for the group of initiators."; 252 }; 253 254 register l4_ap_prot_group_roles_k_l_4 addr(base, 0x2A0) "Define MReqInfo bit vectors for a protection group." { 255 _ 16 mbz; 256 enable 16 ro "Setting of type acces allowed for the group of initiators."; 257 }; 258 259 register l4_ap_prot_group_roles_k_l_5 addr(base, 0x2A8) "Define MReqInfo bit vectors for a protection group." { 260 _ 16 mbz; 261 enable 16 ro "Setting of type acces allowed for the group of initiators."; 262 }; 263 264 register l4_ap_prot_group_roles_k_l_6 addr(base, 0x2B0) "Define MReqInfo bit vectors for a protection group." { 265 _ 16 mbz; 266 enable 16 ro "Setting of type acces allowed for the group of initiators."; 267 }; 268 269 register l4_ap_prot_group_roles_k_l_7 addr(base, 0x2B8) "Define MReqInfo bit vectors for a protection group." { 270 _ 16 mbz; 271 enable 16 ro "Setting of type acces allowed for the group of initiators."; 272 }; 273 274 register l4_ap_prot_group_roles_k_h_0 ro addr(base, 0x284) "Define ConnID bit vectors for a protection group." type(uint32); 275 276 register l4_ap_prot_group_roles_k_h_1 ro addr(base, 0x28C) "Define ConnID bit vectors for a protection group." type(uint32); 277 278 register l4_ap_prot_group_roles_k_h_2 ro addr(base, 0x294) "Define ConnID bit vectors for a protection group." type(uint32); 279 280 register l4_ap_prot_group_roles_k_h_3 ro addr(base, 0x29C) "Define ConnID bit vectors for a protection group." type(uint32); 281 282 register l4_ap_prot_group_roles_k_h_4 ro addr(base, 0x2A4) "Define ConnID bit vectors for a protection group." type(uint32); 283 284 register l4_ap_prot_group_roles_k_h_5 ro addr(base, 0x2AC) "Define ConnID bit vectors for a protection group." type(uint32); 285 286 register l4_ap_prot_group_roles_k_h_6 ro addr(base, 0x2B4) "Define ConnID bit vectors for a protection group." type(uint32); 287 288 register l4_ap_prot_group_roles_k_h_7 ro addr(base, 0x2BC) "Define ConnID bit vectors for a protection group." type(uint32); 289 290 register l4_ap_region_l_l_0 addr(base, 0x300) "Define the base address of the region in respect to the segment it belongs to." { 291 _ 8 mbz; 292 base 24 ro "Sets the base address of the region relative to its segment base."; 293 }; 294 295 register l4_ap_region_l_l_1 addr(base, 0x308) "Define the base address of the region in respect to the segment it belongs to." { 296 _ 8 mbz; 297 base 24 ro "Sets the base address of the region relative to its segment base."; 298 }; 299 300 register l4_ap_region_l_l_2 addr(base, 0x310) "Define the base address of the region in respect to the segment it belongs to." { 301 _ 8 mbz; 302 base 24 ro "Sets the base address of the region relative to its segment base."; 303 }; 304 305 register l4_ap_region_l_l_3 addr(base, 0x318) "Define the base address of the region in respect to the segment it belongs to." { 306 _ 8 mbz; 307 base 24 ro "Sets the base address of the region relative to its segment base."; 308 }; 309 310 register l4_ap_region_l_l_4 addr(base, 0x320) "Define the base address of the region in respect to the segment it belongs to." { 311 _ 8 mbz; 312 base 24 ro "Sets the base address of the region relative to its segment base."; 313 }; 314 315 register l4_ap_region_l_l_5 addr(base, 0x328) "Define the base address of the region in respect to the segment it belongs to." { 316 _ 8 mbz; 317 base 24 ro "Sets the base address of the region relative to its segment base."; 318 }; 319 320 register l4_ap_region_l_l_6 addr(base, 0x330) "Define the base address of the region in respect to the segment it belongs to." { 321 _ 8 mbz; 322 base 24 ro "Sets the base address of the region relative to its segment base."; 323 }; 324 325 register l4_ap_region_l_l_7 addr(base, 0x338) "Define the base address of the region in respect to the segment it belongs to." { 326 _ 8 mbz; 327 base 24 ro "Sets the base address of the region relative to its segment base."; 328 }; 329 330 register l4_ap_region_l_l_8 addr(base, 0x340) "Define the base address of the region in respect to the segment it belongs to." { 331 _ 8 mbz; 332 base 24 ro "Sets the base address of the region relative to its segment base."; 333 }; 334 335 register l4_ap_region_l_l_9 addr(base, 0x348) "Define the base address of the region in respect to the segment it belongs to." { 336 _ 8 mbz; 337 base 24 ro "Sets the base address of the region relative to its segment base."; 338 }; 339 340 register l4_ap_region_l_l_10 addr(base, 0x350) "Define the base address of the region in respect to the segment it belongs to." { 341 _ 8 mbz; 342 base 24 ro "Sets the base address of the region relative to its segment base."; 343 }; 344 345 register l4_ap_region_l_l_11 addr(base, 0x358) "Define the base address of the region in respect to the segment it belongs to." { 346 _ 8 mbz; 347 base 24 ro "Sets the base address of the region relative to its segment base."; 348 }; 349 350 register l4_ap_region_l_l_12 addr(base, 0x360) "Define the base address of the region in respect to the segment it belongs to." { 351 _ 8 mbz; 352 base 24 ro "Sets the base address of the region relative to its segment base."; 353 }; 354 355 register l4_ap_region_l_l_13 addr(base, 0x368) "Define the base address of the region in respect to the segment it belongs to." { 356 _ 8 mbz; 357 base 24 ro "Sets the base address of the region relative to its segment base."; 358 }; 359 360 register l4_ap_region_l_l_14 addr(base, 0x370) "Define the base address of the region in respect to the segment it belongs to." { 361 _ 8 mbz; 362 base 24 ro "Sets the base address of the region relative to its segment base."; 363 }; 364 365 register l4_ap_region_l_l_15 addr(base, 0x378) "Define the base address of the region in respect to the segment it belongs to." { 366 _ 8 mbz; 367 base 24 ro "Sets the base address of the region relative to its segment base."; 368 }; 369 370 register l4_ap_region_l_l_16 addr(base, 0x380) "Define the base address of the region in respect to the segment it belongs to." { 371 _ 8 mbz; 372 base 24 ro "Sets the base address of the region relative to its segment base."; 373 }; 374 375 register l4_ap_region_l_l_17 addr(base, 0x388) "Define the base address of the region in respect to the segment it belongs to." { 376 _ 8 mbz; 377 base 24 ro "Sets the base address of the region relative to its segment base."; 378 }; 379 380 register l4_ap_region_l_l_18 addr(base, 0x390) "Define the base address of the region in respect to the segment it belongs to." { 381 _ 8 mbz; 382 base 24 ro "Sets the base address of the region relative to its segment base."; 383 }; 384 385 register l4_ap_region_l_l_19 addr(base, 0x398) "Define the base address of the region in respect to the segment it belongs to." { 386 _ 8 mbz; 387 base 24 ro "Sets the base address of the region relative to its segment base."; 388 }; 389 390 register l4_ap_region_l_l_20 addr(base, 0x3A0) "Define the base address of the region in respect to the segment it belongs to." { 391 _ 8 mbz; 392 base 24 ro "Sets the base address of the region relative to its segment base."; 393 }; 394 395 register l4_ap_region_l_l_21 addr(base, 0x3A8) "Define the base address of the region in respect to the segment it belongs to." { 396 _ 8 mbz; 397 base 24 ro "Sets the base address of the region relative to its segment base."; 398 }; 399 400 register l4_ap_region_l_l_22 addr(base, 0x3B0) "Define the base address of the region in respect to the segment it belongs to." { 401 _ 8 mbz; 402 base 24 ro "Sets the base address of the region relative to its segment base."; 403 }; 404 405 register l4_ap_region_l_l_23 addr(base, 0x3B8) "Define the base address of the region in respect to the segment it belongs to." { 406 _ 8 mbz; 407 base 24 ro "Sets the base address of the region relative to its segment base."; 408 }; 409 410 register l4_ap_region_l_l_24 addr(base, 0x3C0) "Define the base address of the region in respect to the segment it belongs to." { 411 _ 8 mbz; 412 base 24 ro "Sets the base address of the region relative to its segment base."; 413 }; 414 415 register l4_ap_region_l_l_25 addr(base, 0x3C8) "Define the base address of the region in respect to the segment it belongs to." { 416 _ 8 mbz; 417 base 24 ro "Sets the base address of the region relative to its segment base."; 418 }; 419 420 register l4_ap_region_l_l_26 addr(base, 0x3D0) "Define the base address of the region in respect to the segment it belongs to." { 421 _ 8 mbz; 422 base 24 ro "Sets the base address of the region relative to its segment base."; 423 }; 424 425 register l4_ap_region_l_l_27 addr(base, 0x3D8) "Define the base address of the region in respect to the segment it belongs to." { 426 _ 8 mbz; 427 base 24 ro "Sets the base address of the region relative to its segment base."; 428 }; 429 430 register l4_ap_region_l_l_28 addr(base, 0x3E0) "Define the base address of the region in respect to the segment it belongs to." { 431 _ 8 mbz; 432 base 24 ro "Sets the base address of the region relative to its segment base."; 433 }; 434 435 register l4_ap_region_l_l_29 addr(base, 0x3E8) "Define the base address of the region in respect to the segment it belongs to." { 436 _ 8 mbz; 437 base 24 ro "Sets the base address of the region relative to its segment base."; 438 }; 439 440 register l4_ap_region_l_l_30 addr(base, 0x3F0) "Define the base address of the region in respect to the segment it belongs to." { 441 _ 8 mbz; 442 base 24 ro "Sets the base address of the region relative to its segment base."; 443 }; 444 445 register l4_ap_region_l_l_31 addr(base, 0x3F8) "Define the base address of the region in respect to the segment it belongs to." { 446 _ 8 mbz; 447 base 24 ro "Sets the base address of the region relative to its segment base."; 448 }; 449 450 register l4_ap_region_l_l_32 addr(base, 0x400) "Define the base address of the region in respect to the segment it belongs to." { 451 _ 8 mbz; 452 base 24 ro "Sets the base address of the region relative to its segment base."; 453 }; 454 455 register l4_ap_region_l_l_33 addr(base, 0x408) "Define the base address of the region in respect to the segment it belongs to." { 456 _ 8 mbz; 457 base 24 ro "Sets the base address of the region relative to its segment base."; 458 }; 459 460 register l4_ap_region_l_l_34 addr(base, 0x410) "Define the base address of the region in respect to the segment it belongs to." { 461 _ 8 mbz; 462 base 24 ro "Sets the base address of the region relative to its segment base."; 463 }; 464 465 register l4_ap_region_l_l_35 addr(base, 0x418) "Define the base address of the region in respect to the segment it belongs to." { 466 _ 8 mbz; 467 base 24 ro "Sets the base address of the region relative to its segment base."; 468 }; 469 470 register l4_ap_region_l_l_36 addr(base, 0x420) "Define the base address of the region in respect to the segment it belongs to." { 471 _ 8 mbz; 472 base 24 ro "Sets the base address of the region relative to its segment base."; 473 }; 474 475 register l4_ap_region_l_l_37 addr(base, 0x428) "Define the base address of the region in respect to the segment it belongs to." { 476 _ 8 mbz; 477 base 24 ro "Sets the base address of the region relative to its segment base."; 478 }; 479 480 register l4_ap_region_l_l_38 addr(base, 0x430) "Define the base address of the region in respect to the segment it belongs to." { 481 _ 8 mbz; 482 base 24 ro "Sets the base address of the region relative to its segment base."; 483 }; 484 485 register l4_ap_region_l_l_39 addr(base, 0x438) "Define the base address of the region in respect to the segment it belongs to." { 486 _ 8 mbz; 487 base 24 ro "Sets the base address of the region relative to its segment base."; 488 }; 489 490 register l4_ap_region_l_l_40 addr(base, 0x440) "Define the base address of the region in respect to the segment it belongs to." { 491 _ 8 mbz; 492 base 24 ro "Sets the base address of the region relative to its segment base."; 493 }; 494 495 register l4_ap_region_l_l_41 addr(base, 0x448) "Define the base address of the region in respect to the segment it belongs to." { 496 _ 8 mbz; 497 base 24 ro "Sets the base address of the region relative to its segment base."; 498 }; 499 500 register l4_ap_region_l_l_42 addr(base, 0x450) "Define the base address of the region in respect to the segment it belongs to." { 501 _ 8 mbz; 502 base 24 ro "Sets the base address of the region relative to its segment base."; 503 }; 504 505 register l4_ap_region_l_l_43 addr(base, 0x458) "Define the base address of the region in respect to the segment it belongs to." { 506 _ 8 mbz; 507 base 24 ro "Sets the base address of the region relative to its segment base."; 508 }; 509 510 register l4_ap_region_l_l_44 addr(base, 0x460) "Define the base address of the region in respect to the segment it belongs to." { 511 _ 8 mbz; 512 base 24 ro "Sets the base address of the region relative to its segment base."; 513 }; 514 515 register l4_ap_region_l_l_45 addr(base, 0x468) "Define the base address of the region in respect to the segment it belongs to." { 516 _ 8 mbz; 517 base 24 ro "Sets the base address of the region relative to its segment base."; 518 }; 519 520 register l4_ap_region_l_l_46 addr(base, 0x470) "Define the base address of the region in respect to the segment it belongs to." { 521 _ 8 mbz; 522 base 24 ro "Sets the base address of the region relative to its segment base."; 523 }; 524 525 register l4_ap_region_l_l_47 addr(base, 0x478) "Define the base address of the region in respect to the segment it belongs to." { 526 _ 8 mbz; 527 base 24 ro "Sets the base address of the region relative to its segment base."; 528 }; 529 530 register l4_ap_region_l_l_48 addr(base, 0x480) "Define the base address of the region in respect to the segment it belongs to." { 531 _ 8 mbz; 532 base 24 ro "Sets the base address of the region relative to its segment base."; 533 }; 534 535 register l4_ap_region_l_l_49 addr(base, 0x488) "Define the base address of the region in respect to the segment it belongs to." { 536 _ 8 mbz; 537 base 24 ro "Sets the base address of the region relative to its segment base."; 538 }; 539 540 register l4_ap_region_l_l_50 addr(base, 0x490) "Define the base address of the region in respect to the segment it belongs to." { 541 _ 8 mbz; 542 base 24 ro "Sets the base address of the region relative to its segment base."; 543 }; 544 545 register l4_ap_region_l_l_51 addr(base, 0x498) "Define the base address of the region in respect to the segment it belongs to." { 546 _ 8 mbz; 547 base 24 ro "Sets the base address of the region relative to its segment base."; 548 }; 549 550 register l4_ap_region_l_l_52 addr(base, 0x4A0) "Define the base address of the region in respect to the segment it belongs to." { 551 _ 8 mbz; 552 base 24 ro "Sets the base address of the region relative to its segment base."; 553 }; 554 555 register l4_ap_region_l_l_53 addr(base, 0x4A8) "Define the base address of the region in respect to the segment it belongs to." { 556 _ 8 mbz; 557 base 24 ro "Sets the base address of the region relative to its segment base."; 558 }; 559 560 register l4_ap_region_l_l_54 addr(base, 0x4B0) "Define the base address of the region in respect to the segment it belongs to." { 561 _ 8 mbz; 562 base 24 ro "Sets the base address of the region relative to its segment base."; 563 }; 564 565 register l4_ap_region_l_l_55 addr(base, 0x4B8) "Define the base address of the region in respect to the segment it belongs to." { 566 _ 8 mbz; 567 base 24 ro "Sets the base address of the region relative to its segment base."; 568 }; 569 570 register l4_ap_region_l_l_56 addr(base, 0x4C0) "Define the base address of the region in respect to the segment it belongs to." { 571 _ 8 mbz; 572 base 24 ro "Sets the base address of the region relative to its segment base."; 573 }; 574 575 register l4_ap_region_l_l_57 addr(base, 0x4C8) "Define the base address of the region in respect to the segment it belongs to." { 576 _ 8 mbz; 577 base 24 ro "Sets the base address of the region relative to its segment base."; 578 }; 579 580 register l4_ap_region_l_l_58 addr(base, 0x4D0) "Define the base address of the region in respect to the segment it belongs to." { 581 _ 8 mbz; 582 base 24 ro "Sets the base address of the region relative to its segment base."; 583 }; 584 585 register l4_ap_region_l_l_59 addr(base, 0x4D8) "Define the base address of the region in respect to the segment it belongs to." { 586 _ 8 mbz; 587 base 24 ro "Sets the base address of the region relative to its segment base."; 588 }; 589 590 register l4_ap_region_l_l_60 addr(base, 0x4E0) "Define the base address of the region in respect to the segment it belongs to." { 591 _ 8 mbz; 592 base 24 ro "Sets the base address of the region relative to its segment base."; 593 }; 594 595 register l4_ap_region_l_l_61 addr(base, 0x4E8) "Define the base address of the region in respect to the segment it belongs to." { 596 _ 8 mbz; 597 base 24 ro "Sets the base address of the region relative to its segment base."; 598 }; 599 600 register l4_ap_region_l_l_62 addr(base, 0x4F0) "Define the base address of the region in respect to the segment it belongs to." { 601 _ 8 mbz; 602 base 24 ro "Sets the base address of the region relative to its segment base."; 603 }; 604 605 register l4_ap_region_l_l_63 addr(base, 0x4F8) "Define the base address of the region in respect to the segment it belongs to." { 606 _ 8 mbz; 607 base 24 ro "Sets the base address of the region relative to its segment base."; 608 }; 609 610 register l4_ap_region_l_l_64 addr(base, 0x500) "Define the base address of the region in respect to the segment it belongs to." { 611 _ 8 mbz; 612 base 24 ro "Sets the base address of the region relative to its segment base."; 613 }; 614 615 register l4_ap_region_l_l_65 addr(base, 0x508) "Define the base address of the region in respect to the segment it belongs to." { 616 _ 8 mbz; 617 base 24 ro "Sets the base address of the region relative to its segment base."; 618 }; 619 620 register l4_ap_region_l_l_66 addr(base, 0x510) "Define the base address of the region in respect to the segment it belongs to." { 621 _ 8 mbz; 622 base 24 ro "Sets the base address of the region relative to its segment base."; 623 }; 624 625 register l4_ap_region_l_l_67 addr(base, 0x518) "Define the base address of the region in respect to the segment it belongs to." { 626 _ 8 mbz; 627 base 24 ro "Sets the base address of the region relative to its segment base."; 628 }; 629 630 register l4_ap_region_l_l_68 addr(base, 0x520) "Define the base address of the region in respect to the segment it belongs to." { 631 _ 8 mbz; 632 base 24 ro "Sets the base address of the region relative to its segment base."; 633 }; 634 635 register l4_ap_region_l_l_69 addr(base, 0x528) "Define the base address of the region in respect to the segment it belongs to." { 636 _ 8 mbz; 637 base 24 ro "Sets the base address of the region relative to its segment base."; 638 }; 639 640 register l4_ap_region_l_l_70 addr(base, 0x530) "Define the base address of the region in respect to the segment it belongs to." { 641 _ 8 mbz; 642 base 24 ro "Sets the base address of the region relative to its segment base."; 643 }; 644 645 register l4_ap_region_l_l_71 addr(base, 0x538) "Define the base address of the region in respect to the segment it belongs to." { 646 _ 8 mbz; 647 base 24 ro "Sets the base address of the region relative to its segment base."; 648 }; 649 650 register l4_ap_region_l_l_72 addr(base, 0x540) "Define the base address of the region in respect to the segment it belongs to." { 651 _ 8 mbz; 652 base 24 ro "Sets the base address of the region relative to its segment base."; 653 }; 654 655 register l4_ap_region_l_l_73 addr(base, 0x548) "Define the base address of the region in respect to the segment it belongs to." { 656 _ 8 mbz; 657 base 24 ro "Sets the base address of the region relative to its segment base."; 658 }; 659 660 register l4_ap_region_l_l_74 addr(base, 0x550) "Define the base address of the region in respect to the segment it belongs to." { 661 _ 8 mbz; 662 base 24 ro "Sets the base address of the region relative to its segment base."; 663 }; 664 665 register l4_ap_region_l_l_75 addr(base, 0x558) "Define the base address of the region in respect to the segment it belongs to." { 666 _ 8 mbz; 667 base 24 ro "Sets the base address of the region relative to its segment base."; 668 }; 669 670 register l4_ap_region_l_l_76 addr(base, 0x560) "Define the base address of the region in respect to the segment it belongs to." { 671 _ 8 mbz; 672 base 24 ro "Sets the base address of the region relative to its segment base."; 673 }; 674 675 register l4_ap_region_l_l_77 addr(base, 0x568) "Define the base address of the region in respect to the segment it belongs to." { 676 _ 8 mbz; 677 base 24 ro "Sets the base address of the region relative to its segment base."; 678 }; 679 680 register l4_ap_region_l_l_78 addr(base, 0x570) "Define the base address of the region in respect to the segment it belongs to." { 681 _ 8 mbz; 682 base 24 ro "Sets the base address of the region relative to its segment base."; 683 }; 684 685 register l4_ap_region_l_l_79 addr(base, 0x578) "Define the base address of the region in respect to the segment it belongs to." { 686 _ 8 mbz; 687 base 24 ro "Sets the base address of the region relative to its segment base."; 688 }; 689 690 register l4_ap_region_l_l_80 addr(base, 0x580) "Define the base address of the region in respect to the segment it belongs to." { 691 _ 8 mbz; 692 base 24 ro "Sets the base address of the region relative to its segment base."; 693 }; 694 695 register l4_ap_region_l_l_81 addr(base, 0x588) "Define the base address of the region in respect to the segment it belongs to." { 696 _ 8 mbz; 697 base 24 ro "Sets the base address of the region relative to its segment base."; 698 }; 699 700 register l4_ap_region_l_l_82 addr(base, 0x590) "Define the base address of the region in respect to the segment it belongs to." { 701 _ 8 mbz; 702 base 24 ro "Sets the base address of the region relative to its segment base."; 703 }; 704 705 register l4_ap_region_l_l_83 addr(base, 0x598) "Define the base address of the region in respect to the segment it belongs to." { 706 _ 8 mbz; 707 base 24 ro "Sets the base address of the region relative to its segment base."; 708 }; 709 710 register l4_ap_region_l_l_84 addr(base, 0x5A0) "Define the base address of the region in respect to the segment it belongs to." { 711 _ 8 mbz; 712 base 24 ro "Sets the base address of the region relative to its segment base."; 713 }; 714 715 register l4_ap_region_l_l_85 addr(base, 0x5A8) "Define the base address of the region in respect to the segment it belongs to." { 716 _ 8 mbz; 717 base 24 ro "Sets the base address of the region relative to its segment base."; 718 }; 719 720 register l4_ap_region_l_l_86 addr(base, 0x5B0) "Define the base address of the region in respect to the segment it belongs to." { 721 _ 8 mbz; 722 base 24 ro "Sets the base address of the region relative to its segment base."; 723 }; 724 725 register l4_ap_region_l_l_87 addr(base, 0x5B8) "Define the base address of the region in respect to the segment it belongs to." { 726 _ 8 mbz; 727 base 24 ro "Sets the base address of the region relative to its segment base."; 728 }; 729 730 register l4_ap_region_l_l_88 addr(base, 0x5C0) "Define the base address of the region in respect to the segment it belongs to." { 731 _ 8 mbz; 732 base 24 ro "Sets the base address of the region relative to its segment base."; 733 }; 734 735 register l4_ap_region_l_l_89 addr(base, 0x5C8) "Define the base address of the region in respect to the segment it belongs to." { 736 _ 8 mbz; 737 base 24 ro "Sets the base address of the region relative to its segment base."; 738 }; 739 740 register l4_ap_region_l_l_90 addr(base, 0x5D0) "Define the base address of the region in respect to the segment it belongs to." { 741 _ 8 mbz; 742 base 24 ro "Sets the base address of the region relative to its segment base."; 743 }; 744 745 register l4_ap_region_l_l_91 addr(base, 0x5D8) "Define the base address of the region in respect to the segment it belongs to." { 746 _ 8 mbz; 747 base 24 ro "Sets the base address of the region relative to its segment base."; 748 }; 749 750 register l4_ap_region_l_l_92 addr(base, 0x5E0) "Define the base address of the region in respect to the segment it belongs to." { 751 _ 8 mbz; 752 base 24 ro "Sets the base address of the region relative to its segment base."; 753 }; 754 755 register l4_ap_region_l_l_93 addr(base, 0x5E8) "Define the base address of the region in respect to the segment it belongs to." { 756 _ 8 mbz; 757 base 24 ro "Sets the base address of the region relative to its segment base."; 758 }; 759 760 register l4_ap_region_l_l_94 addr(base, 0x5F0) "Define the base address of the region in respect to the segment it belongs to." { 761 _ 8 mbz; 762 base 24 ro "Sets the base address of the region relative to its segment base."; 763 }; 764 765 register l4_ap_region_l_l_95 addr(base, 0x5F8) "Define the base address of the region in respect to the segment it belongs to." { 766 _ 8 mbz; 767 base 24 ro "Sets the base address of the region relative to its segment base."; 768 }; 769 770 register l4_ap_region_l_l_96 addr(base, 0x600) "Define the base address of the region in respect to the segment it belongs to." { 771 _ 8 mbz; 772 base 24 ro "Sets the base address of the region relative to its segment base."; 773 }; 774 775 register l4_ap_region_l_h_0 addr(base, 0x304) "Define the size, protection group and segment ID of the region" { 776 _ 4 mbz; 777 segment_id 4 ro "The segment associated to the region."; 778 _ 1 mbz; 779 prot_group_id 3 rw "The protection group associated to the region."; 780 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 781 _ 11 mbz; 782 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 783 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 784 }; 785 786 register l4_ap_region_l_h_1 addr(base, 0x30C) "Define the size, protection group and segment ID of the region" { 787 _ 4 mbz; 788 segment_id 4 ro "The segment associated to the region."; 789 _ 1 mbz; 790 prot_group_id 3 rw "The protection group associated to the region."; 791 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 792 _ 11 mbz; 793 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 794 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 795 }; 796 797 register l4_ap_region_l_h_2 addr(base, 0x314) "Define the size, protection group and segment ID of the region" { 798 _ 4 mbz; 799 segment_id 4 ro "The segment associated to the region."; 800 _ 1 mbz; 801 prot_group_id 3 rw "The protection group associated to the region."; 802 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 803 _ 11 mbz; 804 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 805 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 806 }; 807 808 register l4_ap_region_l_h_3 addr(base, 0x31C) "Define the size, protection group and segment ID of the region" { 809 _ 4 mbz; 810 segment_id 4 ro "The segment associated to the region."; 811 _ 1 mbz; 812 prot_group_id 3 rw "The protection group associated to the region."; 813 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 814 _ 11 mbz; 815 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 816 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 817 }; 818 819 register l4_ap_region_l_h_4 addr(base, 0x324) "Define the size, protection group and segment ID of the region" { 820 _ 4 mbz; 821 segment_id 4 ro "The segment associated to the region."; 822 _ 1 mbz; 823 prot_group_id 3 rw "The protection group associated to the region."; 824 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 825 _ 11 mbz; 826 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 827 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 828 }; 829 830 register l4_ap_region_l_h_5 addr(base, 0x32C) "Define the size, protection group and segment ID of the region" { 831 _ 4 mbz; 832 segment_id 4 ro "The segment associated to the region."; 833 _ 1 mbz; 834 prot_group_id 3 rw "The protection group associated to the region."; 835 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 836 _ 11 mbz; 837 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 838 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 839 }; 840 841 register l4_ap_region_l_h_6 addr(base, 0x334) "Define the size, protection group and segment ID of the region" { 842 _ 4 mbz; 843 segment_id 4 ro "The segment associated to the region."; 844 _ 1 mbz; 845 prot_group_id 3 rw "The protection group associated to the region."; 846 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 847 _ 11 mbz; 848 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 849 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 850 }; 851 852 register l4_ap_region_l_h_7 addr(base, 0x33C) "Define the size, protection group and segment ID of the region" { 853 _ 4 mbz; 854 segment_id 4 ro "The segment associated to the region."; 855 _ 1 mbz; 856 prot_group_id 3 rw "The protection group associated to the region."; 857 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 858 _ 11 mbz; 859 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 860 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 861 }; 862 863 register l4_ap_region_l_h_8 addr(base, 0x344) "Define the size, protection group and segment ID of the region" { 864 _ 4 mbz; 865 segment_id 4 ro "The segment associated to the region."; 866 _ 1 mbz; 867 prot_group_id 3 rw "The protection group associated to the region."; 868 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 869 _ 11 mbz; 870 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 871 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 872 }; 873 874 register l4_ap_region_l_h_9 addr(base, 0x34C) "Define the size, protection group and segment ID of the region" { 875 _ 4 mbz; 876 segment_id 4 ro "The segment associated to the region."; 877 _ 1 mbz; 878 prot_group_id 3 rw "The protection group associated to the region."; 879 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 880 _ 11 mbz; 881 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 882 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 883 }; 884 885 register l4_ap_region_l_h_10 addr(base, 0x354) "Define the size, protection group and segment ID of the region" { 886 _ 4 mbz; 887 segment_id 4 ro "The segment associated to the region."; 888 _ 1 mbz; 889 prot_group_id 3 rw "The protection group associated to the region."; 890 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 891 _ 11 mbz; 892 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 893 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 894 }; 895 896 register l4_ap_region_l_h_11 addr(base, 0x35C) "Define the size, protection group and segment ID of the region" { 897 _ 4 mbz; 898 segment_id 4 ro "The segment associated to the region."; 899 _ 1 mbz; 900 prot_group_id 3 rw "The protection group associated to the region."; 901 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 902 _ 11 mbz; 903 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 904 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 905 }; 906 907 register l4_ap_region_l_h_12 addr(base, 0x364) "Define the size, protection group and segment ID of the region" { 908 _ 4 mbz; 909 segment_id 4 ro "The segment associated to the region."; 910 _ 1 mbz; 911 prot_group_id 3 rw "The protection group associated to the region."; 912 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 913 _ 11 mbz; 914 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 915 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 916 }; 917 918 register l4_ap_region_l_h_13 addr(base, 0x36C) "Define the size, protection group and segment ID of the region" { 919 _ 4 mbz; 920 segment_id 4 ro "The segment associated to the region."; 921 _ 1 mbz; 922 prot_group_id 3 rw "The protection group associated to the region."; 923 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 924 _ 11 mbz; 925 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 926 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 927 }; 928 929 register l4_ap_region_l_h_14 addr(base, 0x374) "Define the size, protection group and segment ID of the region" { 930 _ 4 mbz; 931 segment_id 4 ro "The segment associated to the region."; 932 _ 1 mbz; 933 prot_group_id 3 rw "The protection group associated to the region."; 934 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 935 _ 11 mbz; 936 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 937 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 938 }; 939 940 register l4_ap_region_l_h_15 addr(base, 0x37C) "Define the size, protection group and segment ID of the region" { 941 _ 4 mbz; 942 segment_id 4 ro "The segment associated to the region."; 943 _ 1 mbz; 944 prot_group_id 3 rw "The protection group associated to the region."; 945 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 946 _ 11 mbz; 947 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 948 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 949 }; 950 951 register l4_ap_region_l_h_16 addr(base, 0x384) "Define the size, protection group and segment ID of the region" { 952 _ 4 mbz; 953 segment_id 4 ro "The segment associated to the region."; 954 _ 1 mbz; 955 prot_group_id 3 rw "The protection group associated to the region."; 956 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 957 _ 11 mbz; 958 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 959 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 960 }; 961 962 register l4_ap_region_l_h_17 addr(base, 0x38C) "Define the size, protection group and segment ID of the region" { 963 _ 4 mbz; 964 segment_id 4 ro "The segment associated to the region."; 965 _ 1 mbz; 966 prot_group_id 3 rw "The protection group associated to the region."; 967 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 968 _ 11 mbz; 969 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 970 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 971 }; 972 973 register l4_ap_region_l_h_18 addr(base, 0x394) "Define the size, protection group and segment ID of the region" { 974 _ 4 mbz; 975 segment_id 4 ro "The segment associated to the region."; 976 _ 1 mbz; 977 prot_group_id 3 rw "The protection group associated to the region."; 978 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 979 _ 11 mbz; 980 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 981 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 982 }; 983 984 register l4_ap_region_l_h_19 addr(base, 0x39C) "Define the size, protection group and segment ID of the region" { 985 _ 4 mbz; 986 segment_id 4 ro "The segment associated to the region."; 987 _ 1 mbz; 988 prot_group_id 3 rw "The protection group associated to the region."; 989 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 990 _ 11 mbz; 991 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 992 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 993 }; 994 995 register l4_ap_region_l_h_20 addr(base, 0x3A4) "Define the size, protection group and segment ID of the region" { 996 _ 4 mbz; 997 segment_id 4 ro "The segment associated to the region."; 998 _ 1 mbz; 999 prot_group_id 3 rw "The protection group associated to the region."; 1000 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1001 _ 11 mbz; 1002 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1003 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1004 }; 1005 1006 register l4_ap_region_l_h_21 addr(base, 0x3AC) "Define the size, protection group and segment ID of the region" { 1007 _ 4 mbz; 1008 segment_id 4 ro "The segment associated to the region."; 1009 _ 1 mbz; 1010 prot_group_id 3 rw "The protection group associated to the region."; 1011 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1012 _ 11 mbz; 1013 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1014 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1015 }; 1016 1017 register l4_ap_region_l_h_22 addr(base, 0x3B4) "Define the size, protection group and segment ID of the region" { 1018 _ 4 mbz; 1019 segment_id 4 ro "The segment associated to the region."; 1020 _ 1 mbz; 1021 prot_group_id 3 rw "The protection group associated to the region."; 1022 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1023 _ 11 mbz; 1024 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1025 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1026 }; 1027 1028 register l4_ap_region_l_h_23 addr(base, 0x3BC) "Define the size, protection group and segment ID of the region" { 1029 _ 4 mbz; 1030 segment_id 4 ro "The segment associated to the region."; 1031 _ 1 mbz; 1032 prot_group_id 3 rw "The protection group associated to the region."; 1033 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1034 _ 11 mbz; 1035 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1036 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1037 }; 1038 1039 register l4_ap_region_l_h_24 addr(base, 0x3C4) "Define the size, protection group and segment ID of the region" { 1040 _ 4 mbz; 1041 segment_id 4 ro "The segment associated to the region."; 1042 _ 1 mbz; 1043 prot_group_id 3 rw "The protection group associated to the region."; 1044 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1045 _ 11 mbz; 1046 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1047 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1048 }; 1049 1050 register l4_ap_region_l_h_25 addr(base, 0x3CC) "Define the size, protection group and segment ID of the region" { 1051 _ 4 mbz; 1052 segment_id 4 ro "The segment associated to the region."; 1053 _ 1 mbz; 1054 prot_group_id 3 rw "The protection group associated to the region."; 1055 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1056 _ 11 mbz; 1057 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1058 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1059 }; 1060 1061 register l4_ap_region_l_h_26 addr(base, 0x3D4) "Define the size, protection group and segment ID of the region" { 1062 _ 4 mbz; 1063 segment_id 4 ro "The segment associated to the region."; 1064 _ 1 mbz; 1065 prot_group_id 3 rw "The protection group associated to the region."; 1066 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1067 _ 11 mbz; 1068 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1069 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1070 }; 1071 1072 register l4_ap_region_l_h_27 addr(base, 0x3DC) "Define the size, protection group and segment ID of the region" { 1073 _ 4 mbz; 1074 segment_id 4 ro "The segment associated to the region."; 1075 _ 1 mbz; 1076 prot_group_id 3 rw "The protection group associated to the region."; 1077 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1078 _ 11 mbz; 1079 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1080 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1081 }; 1082 1083 register l4_ap_region_l_h_28 addr(base, 0x3E4) "Define the size, protection group and segment ID of the region" { 1084 _ 4 mbz; 1085 segment_id 4 ro "The segment associated to the region."; 1086 _ 1 mbz; 1087 prot_group_id 3 rw "The protection group associated to the region."; 1088 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1089 _ 11 mbz; 1090 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1091 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1092 }; 1093 1094 register l4_ap_region_l_h_29 addr(base, 0x3EC) "Define the size, protection group and segment ID of the region" { 1095 _ 4 mbz; 1096 segment_id 4 ro "The segment associated to the region."; 1097 _ 1 mbz; 1098 prot_group_id 3 rw "The protection group associated to the region."; 1099 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1100 _ 11 mbz; 1101 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1102 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1103 }; 1104 1105 register l4_ap_region_l_h_30 addr(base, 0x3F4) "Define the size, protection group and segment ID of the region" { 1106 _ 4 mbz; 1107 segment_id 4 ro "The segment associated to the region."; 1108 _ 1 mbz; 1109 prot_group_id 3 rw "The protection group associated to the region."; 1110 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1111 _ 11 mbz; 1112 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1113 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1114 }; 1115 1116 register l4_ap_region_l_h_31 addr(base, 0x3FC) "Define the size, protection group and segment ID of the region" { 1117 _ 4 mbz; 1118 segment_id 4 ro "The segment associated to the region."; 1119 _ 1 mbz; 1120 prot_group_id 3 rw "The protection group associated to the region."; 1121 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1122 _ 11 mbz; 1123 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1124 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1125 }; 1126 1127 register l4_ap_region_l_h_32 addr(base, 0x404) "Define the size, protection group and segment ID of the region" { 1128 _ 4 mbz; 1129 segment_id 4 ro "The segment associated to the region."; 1130 _ 1 mbz; 1131 prot_group_id 3 rw "The protection group associated to the region."; 1132 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1133 _ 11 mbz; 1134 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1135 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1136 }; 1137 1138 register l4_ap_region_l_h_33 addr(base, 0x40C) "Define the size, protection group and segment ID of the region" { 1139 _ 4 mbz; 1140 segment_id 4 ro "The segment associated to the region."; 1141 _ 1 mbz; 1142 prot_group_id 3 rw "The protection group associated to the region."; 1143 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1144 _ 11 mbz; 1145 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1146 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1147 }; 1148 1149 register l4_ap_region_l_h_34 addr(base, 0x414) "Define the size, protection group and segment ID of the region" { 1150 _ 4 mbz; 1151 segment_id 4 ro "The segment associated to the region."; 1152 _ 1 mbz; 1153 prot_group_id 3 rw "The protection group associated to the region."; 1154 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1155 _ 11 mbz; 1156 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1157 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1158 }; 1159 1160 register l4_ap_region_l_h_35 addr(base, 0x41C) "Define the size, protection group and segment ID of the region" { 1161 _ 4 mbz; 1162 segment_id 4 ro "The segment associated to the region."; 1163 _ 1 mbz; 1164 prot_group_id 3 rw "The protection group associated to the region."; 1165 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1166 _ 11 mbz; 1167 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1168 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1169 }; 1170 1171 register l4_ap_region_l_h_36 addr(base, 0x424) "Define the size, protection group and segment ID of the region" { 1172 _ 4 mbz; 1173 segment_id 4 ro "The segment associated to the region."; 1174 _ 1 mbz; 1175 prot_group_id 3 rw "The protection group associated to the region."; 1176 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1177 _ 11 mbz; 1178 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1179 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1180 }; 1181 1182 register l4_ap_region_l_h_37 addr(base, 0x42C) "Define the size, protection group and segment ID of the region" { 1183 _ 4 mbz; 1184 segment_id 4 ro "The segment associated to the region."; 1185 _ 1 mbz; 1186 prot_group_id 3 rw "The protection group associated to the region."; 1187 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1188 _ 11 mbz; 1189 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1190 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1191 }; 1192 1193 register l4_ap_region_l_h_38 addr(base, 0x434) "Define the size, protection group and segment ID of the region" { 1194 _ 4 mbz; 1195 segment_id 4 ro "The segment associated to the region."; 1196 _ 1 mbz; 1197 prot_group_id 3 rw "The protection group associated to the region."; 1198 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1199 _ 11 mbz; 1200 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1201 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1202 }; 1203 1204 register l4_ap_region_l_h_39 addr(base, 0x43C) "Define the size, protection group and segment ID of the region" { 1205 _ 4 mbz; 1206 segment_id 4 ro "The segment associated to the region."; 1207 _ 1 mbz; 1208 prot_group_id 3 rw "The protection group associated to the region."; 1209 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1210 _ 11 mbz; 1211 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1212 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1213 }; 1214 1215 register l4_ap_region_l_h_40 addr(base, 0x444) "Define the size, protection group and segment ID of the region" { 1216 _ 4 mbz; 1217 segment_id 4 ro "The segment associated to the region."; 1218 _ 1 mbz; 1219 prot_group_id 3 rw "The protection group associated to the region."; 1220 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1221 _ 11 mbz; 1222 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1223 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1224 }; 1225 1226 register l4_ap_region_l_h_41 addr(base, 0x44C) "Define the size, protection group and segment ID of the region" { 1227 _ 4 mbz; 1228 segment_id 4 ro "The segment associated to the region."; 1229 _ 1 mbz; 1230 prot_group_id 3 rw "The protection group associated to the region."; 1231 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1232 _ 11 mbz; 1233 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1234 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1235 }; 1236 1237 register l4_ap_region_l_h_42 addr(base, 0x454) "Define the size, protection group and segment ID of the region" { 1238 _ 4 mbz; 1239 segment_id 4 ro "The segment associated to the region."; 1240 _ 1 mbz; 1241 prot_group_id 3 rw "The protection group associated to the region."; 1242 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1243 _ 11 mbz; 1244 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1245 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1246 }; 1247 1248 register l4_ap_region_l_h_43 addr(base, 0x45C) "Define the size, protection group and segment ID of the region" { 1249 _ 4 mbz; 1250 segment_id 4 ro "The segment associated to the region."; 1251 _ 1 mbz; 1252 prot_group_id 3 rw "The protection group associated to the region."; 1253 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1254 _ 11 mbz; 1255 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1256 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1257 }; 1258 1259 register l4_ap_region_l_h_44 addr(base, 0x464) "Define the size, protection group and segment ID of the region" { 1260 _ 4 mbz; 1261 segment_id 4 ro "The segment associated to the region."; 1262 _ 1 mbz; 1263 prot_group_id 3 rw "The protection group associated to the region."; 1264 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1265 _ 11 mbz; 1266 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1267 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1268 }; 1269 1270 register l4_ap_region_l_h_45 addr(base, 0x46C) "Define the size, protection group and segment ID of the region" { 1271 _ 4 mbz; 1272 segment_id 4 ro "The segment associated to the region."; 1273 _ 1 mbz; 1274 prot_group_id 3 rw "The protection group associated to the region."; 1275 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1276 _ 11 mbz; 1277 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1278 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1279 }; 1280 1281 register l4_ap_region_l_h_46 addr(base, 0x474) "Define the size, protection group and segment ID of the region" { 1282 _ 4 mbz; 1283 segment_id 4 ro "The segment associated to the region."; 1284 _ 1 mbz; 1285 prot_group_id 3 rw "The protection group associated to the region."; 1286 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1287 _ 11 mbz; 1288 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1289 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1290 }; 1291 1292 register l4_ap_region_l_h_47 addr(base, 0x47C) "Define the size, protection group and segment ID of the region" { 1293 _ 4 mbz; 1294 segment_id 4 ro "The segment associated to the region."; 1295 _ 1 mbz; 1296 prot_group_id 3 rw "The protection group associated to the region."; 1297 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1298 _ 11 mbz; 1299 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1300 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1301 }; 1302 1303 register l4_ap_region_l_h_48 addr(base, 0x484) "Define the size, protection group and segment ID of the region" { 1304 _ 4 mbz; 1305 segment_id 4 ro "The segment associated to the region."; 1306 _ 1 mbz; 1307 prot_group_id 3 rw "The protection group associated to the region."; 1308 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1309 _ 11 mbz; 1310 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1311 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1312 }; 1313 1314 register l4_ap_region_l_h_49 addr(base, 0x48C) "Define the size, protection group and segment ID of the region" { 1315 _ 4 mbz; 1316 segment_id 4 ro "The segment associated to the region."; 1317 _ 1 mbz; 1318 prot_group_id 3 rw "The protection group associated to the region."; 1319 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1320 _ 11 mbz; 1321 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1322 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1323 }; 1324 1325 register l4_ap_region_l_h_50 addr(base, 0x494) "Define the size, protection group and segment ID of the region" { 1326 _ 4 mbz; 1327 segment_id 4 ro "The segment associated to the region."; 1328 _ 1 mbz; 1329 prot_group_id 3 rw "The protection group associated to the region."; 1330 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1331 _ 11 mbz; 1332 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1333 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1334 }; 1335 1336 register l4_ap_region_l_h_51 addr(base, 0x49C) "Define the size, protection group and segment ID of the region" { 1337 _ 4 mbz; 1338 segment_id 4 ro "The segment associated to the region."; 1339 _ 1 mbz; 1340 prot_group_id 3 rw "The protection group associated to the region."; 1341 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1342 _ 11 mbz; 1343 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1344 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1345 }; 1346 1347 register l4_ap_region_l_h_52 addr(base, 0x4A4) "Define the size, protection group and segment ID of the region" { 1348 _ 4 mbz; 1349 segment_id 4 ro "The segment associated to the region."; 1350 _ 1 mbz; 1351 prot_group_id 3 rw "The protection group associated to the region."; 1352 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1353 _ 11 mbz; 1354 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1355 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1356 }; 1357 1358 register l4_ap_region_l_h_53 addr(base, 0x4AC) "Define the size, protection group and segment ID of the region" { 1359 _ 4 mbz; 1360 segment_id 4 ro "The segment associated to the region."; 1361 _ 1 mbz; 1362 prot_group_id 3 rw "The protection group associated to the region."; 1363 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1364 _ 11 mbz; 1365 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1366 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1367 }; 1368 1369 register l4_ap_region_l_h_54 addr(base, 0x4B4) "Define the size, protection group and segment ID of the region" { 1370 _ 4 mbz; 1371 segment_id 4 ro "The segment associated to the region."; 1372 _ 1 mbz; 1373 prot_group_id 3 rw "The protection group associated to the region."; 1374 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1375 _ 11 mbz; 1376 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1377 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1378 }; 1379 1380 register l4_ap_region_l_h_55 addr(base, 0x4BC) "Define the size, protection group and segment ID of the region" { 1381 _ 4 mbz; 1382 segment_id 4 ro "The segment associated to the region."; 1383 _ 1 mbz; 1384 prot_group_id 3 rw "The protection group associated to the region."; 1385 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1386 _ 11 mbz; 1387 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1388 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1389 }; 1390 1391 register l4_ap_region_l_h_56 addr(base, 0x4C4) "Define the size, protection group and segment ID of the region" { 1392 _ 4 mbz; 1393 segment_id 4 ro "The segment associated to the region."; 1394 _ 1 mbz; 1395 prot_group_id 3 rw "The protection group associated to the region."; 1396 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1397 _ 11 mbz; 1398 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1399 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1400 }; 1401 1402 register l4_ap_region_l_h_57 addr(base, 0x4CC) "Define the size, protection group and segment ID of the region" { 1403 _ 4 mbz; 1404 segment_id 4 ro "The segment associated to the region."; 1405 _ 1 mbz; 1406 prot_group_id 3 rw "The protection group associated to the region."; 1407 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1408 _ 11 mbz; 1409 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1410 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1411 }; 1412 1413 register l4_ap_region_l_h_58 addr(base, 0x4D4) "Define the size, protection group and segment ID of the region" { 1414 _ 4 mbz; 1415 segment_id 4 ro "The segment associated to the region."; 1416 _ 1 mbz; 1417 prot_group_id 3 rw "The protection group associated to the region."; 1418 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1419 _ 11 mbz; 1420 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1421 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1422 }; 1423 1424 register l4_ap_region_l_h_59 addr(base, 0x4DC) "Define the size, protection group and segment ID of the region" { 1425 _ 4 mbz; 1426 segment_id 4 ro "The segment associated to the region."; 1427 _ 1 mbz; 1428 prot_group_id 3 rw "The protection group associated to the region."; 1429 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1430 _ 11 mbz; 1431 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1432 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1433 }; 1434 1435 register l4_ap_region_l_h_60 addr(base, 0x4E4) "Define the size, protection group and segment ID of the region" { 1436 _ 4 mbz; 1437 segment_id 4 ro "The segment associated to the region."; 1438 _ 1 mbz; 1439 prot_group_id 3 rw "The protection group associated to the region."; 1440 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1441 _ 11 mbz; 1442 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1443 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1444 }; 1445 1446 register l4_ap_region_l_h_61 addr(base, 0x4EC) "Define the size, protection group and segment ID of the region" { 1447 _ 4 mbz; 1448 segment_id 4 ro "The segment associated to the region."; 1449 _ 1 mbz; 1450 prot_group_id 3 rw "The protection group associated to the region."; 1451 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1452 _ 11 mbz; 1453 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1454 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1455 }; 1456 1457 register l4_ap_region_l_h_62 addr(base, 0x4F4) "Define the size, protection group and segment ID of the region" { 1458 _ 4 mbz; 1459 segment_id 4 ro "The segment associated to the region."; 1460 _ 1 mbz; 1461 prot_group_id 3 rw "The protection group associated to the region."; 1462 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1463 _ 11 mbz; 1464 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1465 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1466 }; 1467 1468 register l4_ap_region_l_h_63 addr(base, 0x4FC) "Define the size, protection group and segment ID of the region" { 1469 _ 4 mbz; 1470 segment_id 4 ro "The segment associated to the region."; 1471 _ 1 mbz; 1472 prot_group_id 3 rw "The protection group associated to the region."; 1473 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1474 _ 11 mbz; 1475 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1476 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1477 }; 1478 1479 register l4_ap_region_l_h_64 addr(base, 0x504) "Define the size, protection group and segment ID of the region" { 1480 _ 4 mbz; 1481 segment_id 4 ro "The segment associated to the region."; 1482 _ 1 mbz; 1483 prot_group_id 3 rw "The protection group associated to the region."; 1484 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1485 _ 11 mbz; 1486 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1487 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1488 }; 1489 1490 register l4_ap_region_l_h_65 addr(base, 0x50C) "Define the size, protection group and segment ID of the region" { 1491 _ 4 mbz; 1492 segment_id 4 ro "The segment associated to the region."; 1493 _ 1 mbz; 1494 prot_group_id 3 rw "The protection group associated to the region."; 1495 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1496 _ 11 mbz; 1497 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1498 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1499 }; 1500 1501 register l4_ap_region_l_h_66 addr(base, 0x514) "Define the size, protection group and segment ID of the region" { 1502 _ 4 mbz; 1503 segment_id 4 ro "The segment associated to the region."; 1504 _ 1 mbz; 1505 prot_group_id 3 rw "The protection group associated to the region."; 1506 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1507 _ 11 mbz; 1508 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1509 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1510 }; 1511 1512 register l4_ap_region_l_h_67 addr(base, 0x51C) "Define the size, protection group and segment ID of the region" { 1513 _ 4 mbz; 1514 segment_id 4 ro "The segment associated to the region."; 1515 _ 1 mbz; 1516 prot_group_id 3 rw "The protection group associated to the region."; 1517 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1518 _ 11 mbz; 1519 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1520 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1521 }; 1522 1523 register l4_ap_region_l_h_68 addr(base, 0x524) "Define the size, protection group and segment ID of the region" { 1524 _ 4 mbz; 1525 segment_id 4 ro "The segment associated to the region."; 1526 _ 1 mbz; 1527 prot_group_id 3 rw "The protection group associated to the region."; 1528 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1529 _ 11 mbz; 1530 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1531 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1532 }; 1533 1534 register l4_ap_region_l_h_69 addr(base, 0x52C) "Define the size, protection group and segment ID of the region" { 1535 _ 4 mbz; 1536 segment_id 4 ro "The segment associated to the region."; 1537 _ 1 mbz; 1538 prot_group_id 3 rw "The protection group associated to the region."; 1539 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1540 _ 11 mbz; 1541 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1542 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1543 }; 1544 1545 register l4_ap_region_l_h_70 addr(base, 0x534) "Define the size, protection group and segment ID of the region" { 1546 _ 4 mbz; 1547 segment_id 4 ro "The segment associated to the region."; 1548 _ 1 mbz; 1549 prot_group_id 3 rw "The protection group associated to the region."; 1550 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1551 _ 11 mbz; 1552 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1553 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1554 }; 1555 1556 register l4_ap_region_l_h_71 addr(base, 0x53C) "Define the size, protection group and segment ID of the region" { 1557 _ 4 mbz; 1558 segment_id 4 ro "The segment associated to the region."; 1559 _ 1 mbz; 1560 prot_group_id 3 rw "The protection group associated to the region."; 1561 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1562 _ 11 mbz; 1563 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1564 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1565 }; 1566 1567 register l4_ap_region_l_h_72 addr(base, 0x544) "Define the size, protection group and segment ID of the region" { 1568 _ 4 mbz; 1569 segment_id 4 ro "The segment associated to the region."; 1570 _ 1 mbz; 1571 prot_group_id 3 rw "The protection group associated to the region."; 1572 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1573 _ 11 mbz; 1574 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1575 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1576 }; 1577 1578 register l4_ap_region_l_h_73 addr(base, 0x54C) "Define the size, protection group and segment ID of the region" { 1579 _ 4 mbz; 1580 segment_id 4 ro "The segment associated to the region."; 1581 _ 1 mbz; 1582 prot_group_id 3 rw "The protection group associated to the region."; 1583 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1584 _ 11 mbz; 1585 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1586 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1587 }; 1588 1589 register l4_ap_region_l_h_74 addr(base, 0x554) "Define the size, protection group and segment ID of the region" { 1590 _ 4 mbz; 1591 segment_id 4 ro "The segment associated to the region."; 1592 _ 1 mbz; 1593 prot_group_id 3 rw "The protection group associated to the region."; 1594 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1595 _ 11 mbz; 1596 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1597 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1598 }; 1599 1600 register l4_ap_region_l_h_75 addr(base, 0x55C) "Define the size, protection group and segment ID of the region" { 1601 _ 4 mbz; 1602 segment_id 4 ro "The segment associated to the region."; 1603 _ 1 mbz; 1604 prot_group_id 3 rw "The protection group associated to the region."; 1605 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1606 _ 11 mbz; 1607 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1608 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1609 }; 1610 1611 register l4_ap_region_l_h_76 addr(base, 0x564) "Define the size, protection group and segment ID of the region" { 1612 _ 4 mbz; 1613 segment_id 4 ro "The segment associated to the region."; 1614 _ 1 mbz; 1615 prot_group_id 3 rw "The protection group associated to the region."; 1616 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1617 _ 11 mbz; 1618 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1619 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1620 }; 1621 1622 register l4_ap_region_l_h_77 addr(base, 0x56C) "Define the size, protection group and segment ID of the region" { 1623 _ 4 mbz; 1624 segment_id 4 ro "The segment associated to the region."; 1625 _ 1 mbz; 1626 prot_group_id 3 rw "The protection group associated to the region."; 1627 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1628 _ 11 mbz; 1629 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1630 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1631 }; 1632 1633 register l4_ap_region_l_h_78 addr(base, 0x574) "Define the size, protection group and segment ID of the region" { 1634 _ 4 mbz; 1635 segment_id 4 ro "The segment associated to the region."; 1636 _ 1 mbz; 1637 prot_group_id 3 rw "The protection group associated to the region."; 1638 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1639 _ 11 mbz; 1640 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1641 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1642 }; 1643 1644 register l4_ap_region_l_h_79 addr(base, 0x57C) "Define the size, protection group and segment ID of the region" { 1645 _ 4 mbz; 1646 segment_id 4 ro "The segment associated to the region."; 1647 _ 1 mbz; 1648 prot_group_id 3 rw "The protection group associated to the region."; 1649 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1650 _ 11 mbz; 1651 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1652 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1653 }; 1654 1655 register l4_ap_region_l_h_80 addr(base, 0x584) "Define the size, protection group and segment ID of the region" { 1656 _ 4 mbz; 1657 segment_id 4 ro "The segment associated to the region."; 1658 _ 1 mbz; 1659 prot_group_id 3 rw "The protection group associated to the region."; 1660 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1661 _ 11 mbz; 1662 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1663 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1664 }; 1665 1666 register l4_ap_region_l_h_81 addr(base, 0x58C) "Define the size, protection group and segment ID of the region" { 1667 _ 4 mbz; 1668 segment_id 4 ro "The segment associated to the region."; 1669 _ 1 mbz; 1670 prot_group_id 3 rw "The protection group associated to the region."; 1671 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1672 _ 11 mbz; 1673 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1674 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1675 }; 1676 1677 register l4_ap_region_l_h_82 addr(base, 0x594) "Define the size, protection group and segment ID of the region" { 1678 _ 4 mbz; 1679 segment_id 4 ro "The segment associated to the region."; 1680 _ 1 mbz; 1681 prot_group_id 3 rw "The protection group associated to the region."; 1682 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1683 _ 11 mbz; 1684 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1685 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1686 }; 1687 1688 register l4_ap_region_l_h_83 addr(base, 0x59C) "Define the size, protection group and segment ID of the region" { 1689 _ 4 mbz; 1690 segment_id 4 ro "The segment associated to the region."; 1691 _ 1 mbz; 1692 prot_group_id 3 rw "The protection group associated to the region."; 1693 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1694 _ 11 mbz; 1695 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1696 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1697 }; 1698 1699 register l4_ap_region_l_h_84 addr(base, 0x5A4) "Define the size, protection group and segment ID of the region" { 1700 _ 4 mbz; 1701 segment_id 4 ro "The segment associated to the region."; 1702 _ 1 mbz; 1703 prot_group_id 3 rw "The protection group associated to the region."; 1704 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1705 _ 11 mbz; 1706 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1707 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1708 }; 1709 1710 register l4_ap_region_l_h_85 addr(base, 0x5AC) "Define the size, protection group and segment ID of the region" { 1711 _ 4 mbz; 1712 segment_id 4 ro "The segment associated to the region."; 1713 _ 1 mbz; 1714 prot_group_id 3 rw "The protection group associated to the region."; 1715 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1716 _ 11 mbz; 1717 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1718 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1719 }; 1720 1721 register l4_ap_region_l_h_86 addr(base, 0x5B4) "Define the size, protection group and segment ID of the region" { 1722 _ 4 mbz; 1723 segment_id 4 ro "The segment associated to the region."; 1724 _ 1 mbz; 1725 prot_group_id 3 rw "The protection group associated to the region."; 1726 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1727 _ 11 mbz; 1728 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1729 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1730 }; 1731 1732 register l4_ap_region_l_h_87 addr(base, 0x5BC) "Define the size, protection group and segment ID of the region" { 1733 _ 4 mbz; 1734 segment_id 4 ro "The segment associated to the region."; 1735 _ 1 mbz; 1736 prot_group_id 3 rw "The protection group associated to the region."; 1737 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1738 _ 11 mbz; 1739 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1740 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1741 }; 1742 1743 register l4_ap_region_l_h_88 addr(base, 0x5C4) "Define the size, protection group and segment ID of the region" { 1744 _ 4 mbz; 1745 segment_id 4 ro "The segment associated to the region."; 1746 _ 1 mbz; 1747 prot_group_id 3 rw "The protection group associated to the region."; 1748 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1749 _ 11 mbz; 1750 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1751 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1752 }; 1753 1754 register l4_ap_region_l_h_89 addr(base, 0x5CC) "Define the size, protection group and segment ID of the region" { 1755 _ 4 mbz; 1756 segment_id 4 ro "The segment associated to the region."; 1757 _ 1 mbz; 1758 prot_group_id 3 rw "The protection group associated to the region."; 1759 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1760 _ 11 mbz; 1761 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1762 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1763 }; 1764 1765 register l4_ap_region_l_h_90 addr(base, 0x5D4) "Define the size, protection group and segment ID of the region" { 1766 _ 4 mbz; 1767 segment_id 4 ro "The segment associated to the region."; 1768 _ 1 mbz; 1769 prot_group_id 3 rw "The protection group associated to the region."; 1770 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1771 _ 11 mbz; 1772 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1773 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1774 }; 1775 1776 register l4_ap_region_l_h_91 addr(base, 0x5DC) "Define the size, protection group and segment ID of the region" { 1777 _ 4 mbz; 1778 segment_id 4 ro "The segment associated to the region."; 1779 _ 1 mbz; 1780 prot_group_id 3 rw "The protection group associated to the region."; 1781 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1782 _ 11 mbz; 1783 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1784 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1785 }; 1786 1787 register l4_ap_region_l_h_92 addr(base, 0x5E4) "Define the size, protection group and segment ID of the region" { 1788 _ 4 mbz; 1789 segment_id 4 ro "The segment associated to the region."; 1790 _ 1 mbz; 1791 prot_group_id 3 rw "The protection group associated to the region."; 1792 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1793 _ 11 mbz; 1794 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1795 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1796 }; 1797 1798 register l4_ap_region_l_h_93 addr(base, 0x5EC) "Define the size, protection group and segment ID of the region" { 1799 _ 4 mbz; 1800 segment_id 4 ro "The segment associated to the region."; 1801 _ 1 mbz; 1802 prot_group_id 3 rw "The protection group associated to the region."; 1803 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1804 _ 11 mbz; 1805 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1806 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1807 }; 1808 1809 register l4_ap_region_l_h_94 addr(base, 0x5F4) "Define the size, protection group and segment ID of the region" { 1810 _ 4 mbz; 1811 segment_id 4 ro "The segment associated to the region."; 1812 _ 1 mbz; 1813 prot_group_id 3 rw "The protection group associated to the region."; 1814 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1815 _ 11 mbz; 1816 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1817 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1818 }; 1819 1820 register l4_ap_region_l_h_95 addr(base, 0x5FC) "Define the size, protection group and segment ID of the region" { 1821 _ 4 mbz; 1822 segment_id 4 ro "The segment associated to the region."; 1823 _ 1 mbz; 1824 prot_group_id 3 rw "The protection group associated to the region."; 1825 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1826 _ 11 mbz; 1827 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1828 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1829 }; 1830 1831 register l4_ap_region_l_h_96 addr(base, 0x604) "Define the size, protection group and segment ID of the region" { 1832 _ 4 mbz; 1833 segment_id 4 ro "The segment associated to the region."; 1834 _ 1 mbz; 1835 prot_group_id 3 rw "The protection group associated to the region."; 1836 byte_data_width_exp 3 ro "The target data byte width is 2 bytes."; 1837 _ 11 mbz; 1838 size 5 ro "Define the size of the region in bytes. 2 equals the region."; 1839 enable 1 ro "0x0: Disable the region, no access allows0x1: Enable the region, with access as define in registers"; 1840 }; 1841};