1#!/usr/bin/env perl 2# 3# ==================================================================== 4# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL 5# project. The module is, however, dual licensed under OpenSSL and 6# CRYPTOGAMS licenses depending on where you obtain it. For further 7# details see http://www.openssl.org/~appro/cryptogams/. 8# ==================================================================== 9# 10# SHA512 block transform for x86. September 2007. 11# 12# May 2013. 13# 14# Add SSSE3 code path, 20-25% improvement [over original SSE2 code]. 15# 16# Performance in clock cycles per processed byte (less is better): 17# 18# gcc icc x86 asm SIMD(*) x86_64(**) 19# Pentium 100 97 61 - - 20# PIII 75 77 56 - - 21# P4 116 95 82 34.6 30.8 22# AMD K8 54 55 36 20.7 9.57 23# Core2 66 57 40 15.9 9.97 24# Westmere 70 - 38 12.2 9.58 25# Sandy Bridge 58 - 35 11.9 11.2 26# Ivy Bridge 50 - 33 11.5 8.17 27# Haswell 46 - 29 11.3 7.66 28# Bulldozer 121 - 50 14.0 13.5 29# VIA Nano 91 - 52 33 14.7 30# Atom 126 - 68 48(***) 14.7 31# Silvermont 97 - 58 42(***) 17.5 32# 33# (*) whichever best applicable. 34# (**) x86_64 assembler performance is presented for reference 35# purposes, the results are for integer-only code. 36# (***) paddq is increadibly slow on Atom. 37# 38# IALU code-path is optimized for elder Pentiums. On vanilla Pentium 39# performance improvement over compiler generated code reaches ~60%, 40# while on PIII - ~35%. On newer �-archs improvement varies from 15% 41# to 50%, but it's less important as they are expected to execute SSE2 42# code-path, which is commonly ~2-3x faster [than compiler generated 43# code]. SSE2 code-path is as fast as original sha512-sse2.pl, even 44# though it does not use 128-bit operations. The latter means that 45# SSE2-aware kernel is no longer required to execute the code. Another 46# difference is that new code optimizes amount of writes, but at the 47# cost of increased data cache "footprint" by 1/2KB. 48 49$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; 50push(@INC,"${dir}","${dir}../../perlasm"); 51require "x86asm.pl"; 52 53&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386"); 54 55$sse2=0; 56for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } 57 58&external_label("OPENSSL_ia32cap_P") if ($sse2); 59 60$Tlo=&DWP(0,"esp"); $Thi=&DWP(4,"esp"); 61$Alo=&DWP(8,"esp"); $Ahi=&DWP(8+4,"esp"); 62$Blo=&DWP(16,"esp"); $Bhi=&DWP(16+4,"esp"); 63$Clo=&DWP(24,"esp"); $Chi=&DWP(24+4,"esp"); 64$Dlo=&DWP(32,"esp"); $Dhi=&DWP(32+4,"esp"); 65$Elo=&DWP(40,"esp"); $Ehi=&DWP(40+4,"esp"); 66$Flo=&DWP(48,"esp"); $Fhi=&DWP(48+4,"esp"); 67$Glo=&DWP(56,"esp"); $Ghi=&DWP(56+4,"esp"); 68$Hlo=&DWP(64,"esp"); $Hhi=&DWP(64+4,"esp"); 69$K512="ebp"; 70 71$Asse2=&QWP(0,"esp"); 72$Bsse2=&QWP(8,"esp"); 73$Csse2=&QWP(16,"esp"); 74$Dsse2=&QWP(24,"esp"); 75$Esse2=&QWP(32,"esp"); 76$Fsse2=&QWP(40,"esp"); 77$Gsse2=&QWP(48,"esp"); 78$Hsse2=&QWP(56,"esp"); 79 80$A="mm0"; # B-D and 81$E="mm4"; # F-H are commonly loaded to respectively mm1-mm3 and 82 # mm5-mm7, but it's done on on-demand basis... 83$BxC="mm2"; # ... except for B^C 84 85sub BODY_00_15_sse2 { 86 my $phase=shift; 87 88 #&movq ("mm5",$Fsse2); # load f 89 #&movq ("mm6",$Gsse2); # load g 90 91 &movq ("mm1",$E); # %mm1 is sliding right 92 &pxor ("mm5","mm6"); # f^=g 93 &psrlq ("mm1",14); 94 &movq ($Esse2,$E); # modulo-scheduled save e 95 &pand ("mm5",$E); # f&=e 96 &psllq ($E,23); # $E is sliding left 97 &movq ($A,"mm3") if ($phase<2); 98 &movq (&QWP(8*9,"esp"),"mm7") # save X[i] 99 &movq ("mm3","mm1"); # %mm3 is T1 100 &psrlq ("mm1",4); 101 &pxor ("mm5","mm6"); # Ch(e,f,g) 102 &pxor ("mm3",$E); 103 &psllq ($E,23); 104 &pxor ("mm3","mm1"); 105 &movq ($Asse2,$A); # modulo-scheduled save a 106 &paddq ("mm7","mm5"); # X[i]+=Ch(e,f,g) 107 &pxor ("mm3",$E); 108 &psrlq ("mm1",23); 109 &paddq ("mm7",$Hsse2); # X[i]+=h 110 &pxor ("mm3","mm1"); 111 &psllq ($E,4); 112 &paddq ("mm7",QWP(0,$K512)); # X[i]+=K512[i] 113 &pxor ("mm3",$E); # T1=Sigma1_512(e) 114 115 &movq ($E,$Dsse2); # e = load d, e in next round 116 &paddq ("mm3","mm7"); # T1+=X[i] 117 &movq ("mm5",$A); # %mm5 is sliding right 118 &psrlq ("mm5",28); 119 &paddq ($E,"mm3"); # d += T1 120 &movq ("mm6",$A); # %mm6 is sliding left 121 &movq ("mm7","mm5"); 122 &psllq ("mm6",25); 123 &movq ("mm1",$Bsse2); # load b 124 &psrlq ("mm5",6); 125 &pxor ("mm7","mm6"); 126 &sub ("esp",8); 127 &psllq ("mm6",5); 128 &pxor ("mm7","mm5"); 129 &pxor ($A,"mm1"); # a^b, b^c in next round 130 &psrlq ("mm5",5); 131 &pxor ("mm7","mm6"); 132 &pand ($BxC,$A); # (b^c)&(a^b) 133 &psllq ("mm6",6); 134 &pxor ("mm7","mm5"); 135 &pxor ($BxC,"mm1"); # [h=]Maj(a,b,c) 136 &pxor ("mm6","mm7"); # Sigma0_512(a) 137 &movq ("mm7",&QWP(8*(9+16-1),"esp")) if ($phase!=0); # pre-fetch 138 &movq ("mm5",$Fsse2) if ($phase==0); # load f 139 140 if ($phase>1) { 141 &paddq ($BxC,"mm6"); # h+=Sigma0(a) 142 &add ($K512,8); 143 #&paddq ($BxC,"mm3"); # h+=T1 144 145 ($A,$BxC) = ($BxC,$A); # rotate registers 146 } else { 147 &paddq ("mm3",$BxC); # T1+=Maj(a,b,c) 148 &movq ($BxC,$A); 149 &add ($K512,8); 150 &paddq ("mm3","mm6"); # T1+=Sigma0(a) 151 &movq ("mm6",$Gsse2) if ($phase==0); # load g 152 #&movq ($A,"mm3"); # h=T1 153 } 154} 155 156sub BODY_00_15_x86 { 157 #define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) 158 # LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 159 # HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 160 &mov ("ecx",$Elo); 161 &mov ("edx",$Ehi); 162 &mov ("esi","ecx"); 163 164 &shr ("ecx",9); # lo>>9 165 &mov ("edi","edx"); 166 &shr ("edx",9); # hi>>9 167 &mov ("ebx","ecx"); 168 &shl ("esi",14); # lo<<14 169 &mov ("eax","edx"); 170 &shl ("edi",14); # hi<<14 171 &xor ("ebx","esi"); 172 173 &shr ("ecx",14-9); # lo>>14 174 &xor ("eax","edi"); 175 &shr ("edx",14-9); # hi>>14 176 &xor ("eax","ecx"); 177 &shl ("esi",18-14); # lo<<18 178 &xor ("ebx","edx"); 179 &shl ("edi",18-14); # hi<<18 180 &xor ("ebx","esi"); 181 182 &shr ("ecx",18-14); # lo>>18 183 &xor ("eax","edi"); 184 &shr ("edx",18-14); # hi>>18 185 &xor ("eax","ecx"); 186 &shl ("esi",23-18); # lo<<23 187 &xor ("ebx","edx"); 188 &shl ("edi",23-18); # hi<<23 189 &xor ("eax","esi"); 190 &xor ("ebx","edi"); # T1 = Sigma1(e) 191 192 &mov ("ecx",$Flo); 193 &mov ("edx",$Fhi); 194 &mov ("esi",$Glo); 195 &mov ("edi",$Ghi); 196 &add ("eax",$Hlo); 197 &adc ("ebx",$Hhi); # T1 += h 198 &xor ("ecx","esi"); 199 &xor ("edx","edi"); 200 &and ("ecx",$Elo); 201 &and ("edx",$Ehi); 202 &add ("eax",&DWP(8*(9+15)+0,"esp")); 203 &adc ("ebx",&DWP(8*(9+15)+4,"esp")); # T1 += X[0] 204 &xor ("ecx","esi"); 205 &xor ("edx","edi"); # Ch(e,f,g) = (f^g)&e)^g 206 207 &mov ("esi",&DWP(0,$K512)); 208 &mov ("edi",&DWP(4,$K512)); # K[i] 209 &add ("eax","ecx"); 210 &adc ("ebx","edx"); # T1 += Ch(e,f,g) 211 &mov ("ecx",$Dlo); 212 &mov ("edx",$Dhi); 213 &add ("eax","esi"); 214 &adc ("ebx","edi"); # T1 += K[i] 215 &mov ($Tlo,"eax"); 216 &mov ($Thi,"ebx"); # put T1 away 217 &add ("eax","ecx"); 218 &adc ("ebx","edx"); # d += T1 219 220 #define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) 221 # LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 222 # HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 223 &mov ("ecx",$Alo); 224 &mov ("edx",$Ahi); 225 &mov ($Dlo,"eax"); 226 &mov ($Dhi,"ebx"); 227 &mov ("esi","ecx"); 228 229 &shr ("ecx",2); # lo>>2 230 &mov ("edi","edx"); 231 &shr ("edx",2); # hi>>2 232 &mov ("ebx","ecx"); 233 &shl ("esi",4); # lo<<4 234 &mov ("eax","edx"); 235 &shl ("edi",4); # hi<<4 236 &xor ("ebx","esi"); 237 238 &shr ("ecx",7-2); # lo>>7 239 &xor ("eax","edi"); 240 &shr ("edx",7-2); # hi>>7 241 &xor ("ebx","ecx"); 242 &shl ("esi",25-4); # lo<<25 243 &xor ("eax","edx"); 244 &shl ("edi",25-4); # hi<<25 245 &xor ("eax","esi"); 246 247 &shr ("ecx",28-7); # lo>>28 248 &xor ("ebx","edi"); 249 &shr ("edx",28-7); # hi>>28 250 &xor ("eax","ecx"); 251 &shl ("esi",30-25); # lo<<30 252 &xor ("ebx","edx"); 253 &shl ("edi",30-25); # hi<<30 254 &xor ("eax","esi"); 255 &xor ("ebx","edi"); # Sigma0(a) 256 257 &mov ("ecx",$Alo); 258 &mov ("edx",$Ahi); 259 &mov ("esi",$Blo); 260 &mov ("edi",$Bhi); 261 &add ("eax",$Tlo); 262 &adc ("ebx",$Thi); # T1 = Sigma0(a)+T1 263 &or ("ecx","esi"); 264 &or ("edx","edi"); 265 &and ("ecx",$Clo); 266 &and ("edx",$Chi); 267 &and ("esi",$Alo); 268 &and ("edi",$Ahi); 269 &or ("ecx","esi"); 270 &or ("edx","edi"); # Maj(a,b,c) = ((a|b)&c)|(a&b) 271 272 &add ("eax","ecx"); 273 &adc ("ebx","edx"); # T1 += Maj(a,b,c) 274 &mov ($Tlo,"eax"); 275 &mov ($Thi,"ebx"); 276 277 &mov (&LB("edx"),&BP(0,$K512)); # pre-fetch LSB of *K 278 &sub ("esp",8); 279 &lea ($K512,&DWP(8,$K512)); # K++ 280} 281 282 283&function_begin("sha512_block_data_order"); 284 &mov ("esi",wparam(0)); # ctx 285 &mov ("edi",wparam(1)); # inp 286 &mov ("eax",wparam(2)); # num 287 &mov ("ebx","esp"); # saved sp 288 289 &call (&label("pic_point")); # make it PIC! 290&set_label("pic_point"); 291 &blindpop($K512); 292 &lea ($K512,&DWP(&label("K512")."-".&label("pic_point"),$K512)); 293 294 &sub ("esp",16); 295 &and ("esp",-64); 296 297 &shl ("eax",7); 298 &add ("eax","edi"); 299 &mov (&DWP(0,"esp"),"esi"); # ctx 300 &mov (&DWP(4,"esp"),"edi"); # inp 301 &mov (&DWP(8,"esp"),"eax"); # inp+num*128 302 &mov (&DWP(12,"esp"),"ebx"); # saved sp 303 304if ($sse2) { 305 &picmeup("edx","OPENSSL_ia32cap_P",$K512,&label("K512")); 306 &mov ("ecx",&DWP(0,"edx")); 307 &test ("ecx",1<<26); 308 &jz (&label("loop_x86")); 309 310 &mov ("edx",&DWP(4,"edx")); 311 312 # load ctx->h[0-7] 313 &movq ($A,&QWP(0,"esi")); 314 &and ("ecx",1<<24); # XMM registers availability 315 &movq ("mm1",&QWP(8,"esi")); 316 &and ("edx",1<<9); # SSSE3 bit 317 &movq ($BxC,&QWP(16,"esi")); 318 &or ("ecx","edx"); 319 &movq ("mm3",&QWP(24,"esi")); 320 &movq ($E,&QWP(32,"esi")); 321 &movq ("mm5",&QWP(40,"esi")); 322 &movq ("mm6",&QWP(48,"esi")); 323 &movq ("mm7",&QWP(56,"esi")); 324 &cmp ("ecx",1<<24|1<<9); 325 &je (&label("SSSE3")); 326 &sub ("esp",8*10); 327 &jmp (&label("loop_sse2")); 328 329&set_label("loop_sse2",16); 330 #&movq ($Asse2,$A); 331 &movq ($Bsse2,"mm1"); 332 &movq ($Csse2,$BxC); 333 &movq ($Dsse2,"mm3"); 334 #&movq ($Esse2,$E); 335 &movq ($Fsse2,"mm5"); 336 &movq ($Gsse2,"mm6"); 337 &pxor ($BxC,"mm1"); # magic 338 &movq ($Hsse2,"mm7"); 339 &movq ("mm3",$A); # magic 340 341 &mov ("eax",&DWP(0,"edi")); 342 &mov ("ebx",&DWP(4,"edi")); 343 &add ("edi",8); 344 &mov ("edx",15); # counter 345 &bswap ("eax"); 346 &bswap ("ebx"); 347 &jmp (&label("00_14_sse2")); 348 349&set_label("00_14_sse2",16); 350 &movd ("mm1","eax"); 351 &mov ("eax",&DWP(0,"edi")); 352 &movd ("mm7","ebx"); 353 &mov ("ebx",&DWP(4,"edi")); 354 &add ("edi",8); 355 &bswap ("eax"); 356 &bswap ("ebx"); 357 &punpckldq("mm7","mm1"); 358 359 &BODY_00_15_sse2(); 360 361 &dec ("edx"); 362 &jnz (&label("00_14_sse2")); 363 364 &movd ("mm1","eax"); 365 &movd ("mm7","ebx"); 366 &punpckldq("mm7","mm1"); 367 368 &BODY_00_15_sse2(1); 369 370 &pxor ($A,$A); # A is in %mm3 371 &mov ("edx",32); # counter 372 &jmp (&label("16_79_sse2")); 373 374&set_label("16_79_sse2",16); 375 for ($j=0;$j<2;$j++) { # 2x unroll 376 #&movq ("mm7",&QWP(8*(9+16-1),"esp")); # prefetched in BODY_00_15 377 &movq ("mm5",&QWP(8*(9+16-14),"esp")); 378 &movq ("mm1","mm7"); 379 &psrlq ("mm7",1); 380 &movq ("mm6","mm5"); 381 &psrlq ("mm5",6); 382 &psllq ("mm1",56); 383 &paddq ($A,"mm3"); # from BODY_00_15 384 &movq ("mm3","mm7"); 385 &psrlq ("mm7",7-1); 386 &pxor ("mm3","mm1"); 387 &psllq ("mm1",63-56); 388 &pxor ("mm3","mm7"); 389 &psrlq ("mm7",8-7); 390 &pxor ("mm3","mm1"); 391 &movq ("mm1","mm5"); 392 &psrlq ("mm5",19-6); 393 &pxor ("mm7","mm3"); # sigma0 394 395 &psllq ("mm6",3); 396 &pxor ("mm1","mm5"); 397 &paddq ("mm7",&QWP(8*(9+16),"esp")); 398 &pxor ("mm1","mm6"); 399 &psrlq ("mm5",61-19); 400 &paddq ("mm7",&QWP(8*(9+16-9),"esp")); 401 &pxor ("mm1","mm5"); 402 &psllq ("mm6",45-3); 403 &movq ("mm5",$Fsse2); # load f 404 &pxor ("mm1","mm6"); # sigma1 405 &movq ("mm6",$Gsse2); # load g 406 407 &paddq ("mm7","mm1"); # X[i] 408 #&movq (&QWP(8*9,"esp"),"mm7"); # moved to BODY_00_15 409 410 &BODY_00_15_sse2(2); 411 } 412 &dec ("edx"); 413 &jnz (&label("16_79_sse2")); 414 415 #&movq ($A,$Asse2); 416 &paddq ($A,"mm3"); # from BODY_00_15 417 &movq ("mm1",$Bsse2); 418 #&movq ($BxC,$Csse2); 419 &movq ("mm3",$Dsse2); 420 #&movq ($E,$Esse2); 421 &movq ("mm5",$Fsse2); 422 &movq ("mm6",$Gsse2); 423 &movq ("mm7",$Hsse2); 424 425 &pxor ($BxC,"mm1"); # de-magic 426 &paddq ($A,&QWP(0,"esi")); 427 &paddq ("mm1",&QWP(8,"esi")); 428 &paddq ($BxC,&QWP(16,"esi")); 429 &paddq ("mm3",&QWP(24,"esi")); 430 &paddq ($E,&QWP(32,"esi")); 431 &paddq ("mm5",&QWP(40,"esi")); 432 &paddq ("mm6",&QWP(48,"esi")); 433 &paddq ("mm7",&QWP(56,"esi")); 434 435 &mov ("eax",8*80); 436 &movq (&QWP(0,"esi"),$A); 437 &movq (&QWP(8,"esi"),"mm1"); 438 &movq (&QWP(16,"esi"),$BxC); 439 &movq (&QWP(24,"esi"),"mm3"); 440 &movq (&QWP(32,"esi"),$E); 441 &movq (&QWP(40,"esi"),"mm5"); 442 &movq (&QWP(48,"esi"),"mm6"); 443 &movq (&QWP(56,"esi"),"mm7"); 444 445 &lea ("esp",&DWP(0,"esp","eax")); # destroy frame 446 &sub ($K512,"eax"); # rewind K 447 448 &cmp ("edi",&DWP(8*10+8,"esp")); # are we done yet? 449 &jb (&label("loop_sse2")); 450 451 &mov ("esp",&DWP(8*10+12,"esp")); # restore sp 452 &emms (); 453&function_end_A(); 454 455&set_label("SSSE3",32); 456{ my ($cnt,$frame)=("ecx","edx"); 457 my @X=map("xmm$_",(0..7)); 458 my $j; 459 my $i=0; 460 461 &lea ($frame,&DWP(-64,"esp")); 462 &sub ("esp",256); 463 464 # fixed stack frame layout 465 # 466 # +0 A B C D E F G H # backing store 467 # +64 X[0]+K[i] .. X[15]+K[i] # XMM->MM xfer area 468 # +192 # XMM off-load ring buffer 469 # +256 # saved parameters 470 471 &movdqa (@X[1],&QWP(80*8,$K512)); # byte swap mask 472 &movdqu (@X[0],&QWP(0,"edi")); 473 &pshufb (@X[0],@X[1]); 474 for ($j=0;$j<8;$j++) { 475 &movdqa (&QWP(16*(($j-1)%4),$frame),@X[3]) if ($j>4); # off-load 476 &movdqa (@X[3],&QWP(16*($j%8),$K512)); 477 &movdqa (@X[2],@X[1]) if ($j<7); # perpetuate byte swap mask 478 &movdqu (@X[1],&QWP(16*($j+1),"edi")) if ($j<7); # next input 479 &movdqa (@X[1],&QWP(16*(($j+1)%4),$frame)) if ($j==7);# restore @X[0] 480 &paddq (@X[3],@X[0]); 481 &pshufb (@X[1],@X[2]) if ($j<7); 482 &movdqa (&QWP(16*($j%8)-128,$frame),@X[3]); # xfer X[i]+K[i] 483 484 push(@X,shift(@X)); # rotate(@X) 485 } 486 #&jmp (&label("loop_ssse3")); 487 &nop (); 488 489&set_label("loop_ssse3",32); 490 &movdqa (@X[2],&QWP(16*(($j+1)%4),$frame)); # pre-restore @X[1] 491 &movdqa (&QWP(16*(($j-1)%4),$frame),@X[3]); # off-load @X[3] 492 &lea ($K512,&DWP(16*8,$K512)); 493 494 #&movq ($Asse2,$A); # off-load A-H 495 &movq ($Bsse2,"mm1"); 496 &mov ("ebx","edi"); 497 &movq ($Csse2,$BxC); 498 &lea ("edi",&DWP(128,"edi")); # advance input 499 &movq ($Dsse2,"mm3"); 500 &cmp ("edi","eax"); 501 #&movq ($Esse2,$E); 502 &movq ($Fsse2,"mm5"); 503 &cmovb ("ebx","edi"); 504 &movq ($Gsse2,"mm6"); 505 &mov ("ecx",4); # loop counter 506 &pxor ($BxC,"mm1"); # magic 507 &movq ($Hsse2,"mm7"); 508 &pxor ("mm3","mm3"); # magic 509 510 &jmp (&label("00_47_ssse3")); 511 512sub BODY_00_15_ssse3 { # "phase-less" copy of BODY_00_15_sse2 513 ( 514 '&movq ("mm1",$E)', # %mm1 is sliding right 515 '&movq ("mm7",&QWP(((-8*$i)%128)-128,$frame))',# X[i]+K[i] 516 '&pxor ("mm5","mm6")', # f^=g 517 '&psrlq ("mm1",14)', 518 '&movq (&QWP(8*($i+4)%64,"esp"),$E)', # modulo-scheduled save e 519 '&pand ("mm5",$E)', # f&=e 520 '&psllq ($E,23)', # $E is sliding left 521 '&paddq ($A,"mm3")', # [h+=Maj(a,b,c)] 522 '&movq ("mm3","mm1")', # %mm3 is T1 523 '&psrlq("mm1",4)', 524 '&pxor ("mm5","mm6")', # Ch(e,f,g) 525 '&pxor ("mm3",$E)', 526 '&psllq($E,23)', 527 '&pxor ("mm3","mm1")', 528 '&movq (&QWP(8*$i%64,"esp"),$A)', # modulo-scheduled save a 529 '&paddq("mm7","mm5")', # X[i]+=Ch(e,f,g) 530 '&pxor ("mm3",$E)', 531 '&psrlq("mm1",23)', 532 '&paddq("mm7",&QWP(8*($i+7)%64,"esp"))', # X[i]+=h 533 '&pxor ("mm3","mm1")', 534 '&psllq($E,4)', 535 '&pxor ("mm3",$E)', # T1=Sigma1_512(e) 536 537 '&movq ($E,&QWP(8*($i+3)%64,"esp"))', # e = load d, e in next round 538 '&paddq ("mm3","mm7")', # T1+=X[i] 539 '&movq ("mm5",$A)', # %mm5 is sliding right 540 '&psrlq("mm5",28)', 541 '&paddq ($E,"mm3")', # d += T1 542 '&movq ("mm6",$A)', # %mm6 is sliding left 543 '&movq ("mm7","mm5")', 544 '&psllq("mm6",25)', 545 '&movq ("mm1",&QWP(8*($i+1)%64,"esp"))', # load b 546 '&psrlq("mm5",6)', 547 '&pxor ("mm7","mm6")', 548 '&psllq("mm6",5)', 549 '&pxor ("mm7","mm5")', 550 '&pxor ($A,"mm1")', # a^b, b^c in next round 551 '&psrlq("mm5",5)', 552 '&pxor ("mm7","mm6")', 553 '&pand ($BxC,$A)', # (b^c)&(a^b) 554 '&psllq("mm6",6)', 555 '&pxor ("mm7","mm5")', 556 '&pxor ($BxC,"mm1")', # [h=]Maj(a,b,c) 557 '&pxor ("mm6","mm7")', # Sigma0_512(a) 558 '&movq ("mm5",&QWP(8*($i+5-1)%64,"esp"))', # pre-load f 559 '&paddq ($BxC,"mm6")', # h+=Sigma0(a) 560 '&movq ("mm6",&QWP(8*($i+6-1)%64,"esp"))', # pre-load g 561 562 '($A,$BxC) = ($BxC,$A); $i--;' 563 ); 564} 565 566&set_label("00_47_ssse3",32); 567 568 for(;$j<16;$j++) { 569 my ($t0,$t2,$t1)=@X[2..4]; 570 my @insns = (&BODY_00_15_ssse3(),&BODY_00_15_ssse3()); 571 572 &movdqa ($t2,@X[5]); 573 &movdqa (@X[1],$t0); # restore @X[1] 574 &palignr ($t0,@X[0],8); # X[1..2] 575 &movdqa (&QWP(16*($j%4),$frame),@X[4]); # off-load @X[4] 576 &palignr ($t2,@X[4],8); # X[9..10] 577 578 &movdqa ($t1,$t0); 579 &psrlq ($t0,7); 580 &paddq (@X[0],$t2); # X[0..1] += X[9..10] 581 &movdqa ($t2,$t1); 582 &psrlq ($t1,1); 583 &psllq ($t2,64-8); 584 &pxor ($t0,$t1); 585 &psrlq ($t1,8-1); 586 &pxor ($t0,$t2); 587 &psllq ($t2,8-1); 588 &pxor ($t0,$t1); 589 &movdqa ($t1,@X[7]); 590 &pxor ($t0,$t2); # sigma0(X[1..2]) 591 &movdqa ($t2,@X[7]); 592 &psrlq ($t1,6); 593 &paddq (@X[0],$t0); # X[0..1] += sigma0(X[1..2]) 594 595 &movdqa ($t0,@X[7]); 596 &psrlq ($t2,19); 597 &psllq ($t0,64-61); 598 &pxor ($t1,$t2); 599 &psrlq ($t2,61-19); 600 &pxor ($t1,$t0); 601 &psllq ($t0,61-19); 602 &pxor ($t1,$t2); 603 &movdqa ($t2,&QWP(16*(($j+2)%4),$frame));# pre-restore @X[1] 604 &pxor ($t1,$t0); # sigma0(X[1..2]) 605 &movdqa ($t0,&QWP(16*($j%8),$K512)); 606 eval(shift(@insns)); 607 &paddq (@X[0],$t1); # X[0..1] += sigma0(X[14..15]) 608 eval(shift(@insns)); 609 eval(shift(@insns)); 610 eval(shift(@insns)); 611 eval(shift(@insns)); 612 &paddq ($t0,@X[0]); 613 foreach(@insns) { eval; } 614 &movdqa (&QWP(16*($j%8)-128,$frame),$t0);# xfer X[i]+K[i] 615 616 push(@X,shift(@X)); # rotate(@X) 617 } 618 &lea ($K512,&DWP(16*8,$K512)); 619 &dec ("ecx"); 620 &jnz (&label("00_47_ssse3")); 621 622 &movdqa (@X[1],&QWP(0,$K512)); # byte swap mask 623 &lea ($K512,&DWP(-80*8,$K512)); # rewind 624 &movdqu (@X[0],&QWP(0,"ebx")); 625 &pshufb (@X[0],@X[1]); 626 627 for ($j=0;$j<8;$j++) { # load next or same block 628 my @insns = (&BODY_00_15_ssse3(),&BODY_00_15_ssse3()); 629 630 &movdqa (&QWP(16*(($j-1)%4),$frame),@X[3]) if ($j>4); # off-load 631 &movdqa (@X[3],&QWP(16*($j%8),$K512)); 632 &movdqa (@X[2],@X[1]) if ($j<7); # perpetuate byte swap mask 633 &movdqu (@X[1],&QWP(16*($j+1),"ebx")) if ($j<7); # next input 634 &movdqa (@X[1],&QWP(16*(($j+1)%4),$frame)) if ($j==7);# restore @X[0] 635 &paddq (@X[3],@X[0]); 636 &pshufb (@X[1],@X[2]) if ($j<7); 637 foreach(@insns) { eval; } 638 &movdqa (&QWP(16*($j%8)-128,$frame),@X[3]);# xfer X[i]+K[i] 639 640 push(@X,shift(@X)); # rotate(@X) 641 } 642 643 #&movq ($A,$Asse2); # load A-H 644 &movq ("mm1",$Bsse2); 645 &paddq ($A,"mm3"); # from BODY_00_15 646 #&movq ($BxC,$Csse2); 647 &movq ("mm3",$Dsse2); 648 #&movq ($E,$Esse2); 649 #&movq ("mm5",$Fsse2); 650 #&movq ("mm6",$Gsse2); 651 &movq ("mm7",$Hsse2); 652 653 &pxor ($BxC,"mm1"); # de-magic 654 &paddq ($A,&QWP(0,"esi")); 655 &paddq ("mm1",&QWP(8,"esi")); 656 &paddq ($BxC,&QWP(16,"esi")); 657 &paddq ("mm3",&QWP(24,"esi")); 658 &paddq ($E,&QWP(32,"esi")); 659 &paddq ("mm5",&QWP(40,"esi")); 660 &paddq ("mm6",&QWP(48,"esi")); 661 &paddq ("mm7",&QWP(56,"esi")); 662 663 &movq (&QWP(0,"esi"),$A); 664 &movq (&QWP(8,"esi"),"mm1"); 665 &movq (&QWP(16,"esi"),$BxC); 666 &movq (&QWP(24,"esi"),"mm3"); 667 &movq (&QWP(32,"esi"),$E); 668 &movq (&QWP(40,"esi"),"mm5"); 669 &movq (&QWP(48,"esi"),"mm6"); 670 &movq (&QWP(56,"esi"),"mm7"); 671 672 &cmp ("edi","eax") # are we done yet? 673 &jb (&label("loop_ssse3")); 674 675 &mov ("esp",&DWP(64+12,$frame)); # restore sp 676 &emms (); 677} 678&function_end_A(); 679} 680&set_label("loop_x86",16); 681 # copy input block to stack reversing byte and qword order 682 for ($i=0;$i<8;$i++) { 683 &mov ("eax",&DWP($i*16+0,"edi")); 684 &mov ("ebx",&DWP($i*16+4,"edi")); 685 &mov ("ecx",&DWP($i*16+8,"edi")); 686 &mov ("edx",&DWP($i*16+12,"edi")); 687 &bswap ("eax"); 688 &bswap ("ebx"); 689 &bswap ("ecx"); 690 &bswap ("edx"); 691 &push ("eax"); 692 &push ("ebx"); 693 &push ("ecx"); 694 &push ("edx"); 695 } 696 &add ("edi",128); 697 &sub ("esp",9*8); # place for T,A,B,C,D,E,F,G,H 698 &mov (&DWP(8*(9+16)+4,"esp"),"edi"); 699 700 # copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack 701 &lea ("edi",&DWP(8,"esp")); 702 &mov ("ecx",16); 703 &data_word(0xA5F3F689); # rep movsd 704 705&set_label("00_15_x86",16); 706 &BODY_00_15_x86(); 707 708 &cmp (&LB("edx"),0x94); 709 &jne (&label("00_15_x86")); 710 711&set_label("16_79_x86",16); 712 #define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) 713 # LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 714 # HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 715 &mov ("ecx",&DWP(8*(9+15+16-1)+0,"esp")); 716 &mov ("edx",&DWP(8*(9+15+16-1)+4,"esp")); 717 &mov ("esi","ecx"); 718 719 &shr ("ecx",1); # lo>>1 720 &mov ("edi","edx"); 721 &shr ("edx",1); # hi>>1 722 &mov ("eax","ecx"); 723 &shl ("esi",24); # lo<<24 724 &mov ("ebx","edx"); 725 &shl ("edi",24); # hi<<24 726 &xor ("ebx","esi"); 727 728 &shr ("ecx",7-1); # lo>>7 729 &xor ("eax","edi"); 730 &shr ("edx",7-1); # hi>>7 731 &xor ("eax","ecx"); 732 &shl ("esi",31-24); # lo<<31 733 &xor ("ebx","edx"); 734 &shl ("edi",25-24); # hi<<25 735 &xor ("ebx","esi"); 736 737 &shr ("ecx",8-7); # lo>>8 738 &xor ("eax","edi"); 739 &shr ("edx",8-7); # hi>>8 740 &xor ("eax","ecx"); 741 &shl ("edi",31-25); # hi<<31 742 &xor ("ebx","edx"); 743 &xor ("eax","edi"); # T1 = sigma0(X[-15]) 744 745 &mov (&DWP(0,"esp"),"eax"); 746 &mov (&DWP(4,"esp"),"ebx"); # put T1 away 747 748 #define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) 749 # LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 750 # HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 751 &mov ("ecx",&DWP(8*(9+15+16-14)+0,"esp")); 752 &mov ("edx",&DWP(8*(9+15+16-14)+4,"esp")); 753 &mov ("esi","ecx"); 754 755 &shr ("ecx",6); # lo>>6 756 &mov ("edi","edx"); 757 &shr ("edx",6); # hi>>6 758 &mov ("eax","ecx"); 759 &shl ("esi",3); # lo<<3 760 &mov ("ebx","edx"); 761 &shl ("edi",3); # hi<<3 762 &xor ("eax","esi"); 763 764 &shr ("ecx",19-6); # lo>>19 765 &xor ("ebx","edi"); 766 &shr ("edx",19-6); # hi>>19 767 &xor ("eax","ecx"); 768 &shl ("esi",13-3); # lo<<13 769 &xor ("ebx","edx"); 770 &shl ("edi",13-3); # hi<<13 771 &xor ("ebx","esi"); 772 773 &shr ("ecx",29-19); # lo>>29 774 &xor ("eax","edi"); 775 &shr ("edx",29-19); # hi>>29 776 &xor ("ebx","ecx"); 777 &shl ("edi",26-13); # hi<<26 778 &xor ("eax","edx"); 779 &xor ("eax","edi"); # sigma1(X[-2]) 780 781 &mov ("ecx",&DWP(8*(9+15+16)+0,"esp")); 782 &mov ("edx",&DWP(8*(9+15+16)+4,"esp")); 783 &add ("eax",&DWP(0,"esp")); 784 &adc ("ebx",&DWP(4,"esp")); # T1 = sigma1(X[-2])+T1 785 &mov ("esi",&DWP(8*(9+15+16-9)+0,"esp")); 786 &mov ("edi",&DWP(8*(9+15+16-9)+4,"esp")); 787 &add ("eax","ecx"); 788 &adc ("ebx","edx"); # T1 += X[-16] 789 &add ("eax","esi"); 790 &adc ("ebx","edi"); # T1 += X[-7] 791 &mov (&DWP(8*(9+15)+0,"esp"),"eax"); 792 &mov (&DWP(8*(9+15)+4,"esp"),"ebx"); # save X[0] 793 794 &BODY_00_15_x86(); 795 796 &cmp (&LB("edx"),0x17); 797 &jne (&label("16_79_x86")); 798 799 &mov ("esi",&DWP(8*(9+16+80)+0,"esp"));# ctx 800 &mov ("edi",&DWP(8*(9+16+80)+4,"esp"));# inp 801 for($i=0;$i<4;$i++) { 802 &mov ("eax",&DWP($i*16+0,"esi")); 803 &mov ("ebx",&DWP($i*16+4,"esi")); 804 &mov ("ecx",&DWP($i*16+8,"esi")); 805 &mov ("edx",&DWP($i*16+12,"esi")); 806 &add ("eax",&DWP(8+($i*16)+0,"esp")); 807 &adc ("ebx",&DWP(8+($i*16)+4,"esp")); 808 &mov (&DWP($i*16+0,"esi"),"eax"); 809 &mov (&DWP($i*16+4,"esi"),"ebx"); 810 &add ("ecx",&DWP(8+($i*16)+8,"esp")); 811 &adc ("edx",&DWP(8+($i*16)+12,"esp")); 812 &mov (&DWP($i*16+8,"esi"),"ecx"); 813 &mov (&DWP($i*16+12,"esi"),"edx"); 814 } 815 &add ("esp",8*(9+16+80)); # destroy frame 816 &sub ($K512,8*80); # rewind K 817 818 &cmp ("edi",&DWP(8,"esp")); # are we done yet? 819 &jb (&label("loop_x86")); 820 821 &mov ("esp",&DWP(12,"esp")); # restore sp 822&function_end_A(); 823 824&set_label("K512",64); # Yes! I keep it in the code segment! 825 &data_word(0xd728ae22,0x428a2f98); # u64 826 &data_word(0x23ef65cd,0x71374491); # u64 827 &data_word(0xec4d3b2f,0xb5c0fbcf); # u64 828 &data_word(0x8189dbbc,0xe9b5dba5); # u64 829 &data_word(0xf348b538,0x3956c25b); # u64 830 &data_word(0xb605d019,0x59f111f1); # u64 831 &data_word(0xaf194f9b,0x923f82a4); # u64 832 &data_word(0xda6d8118,0xab1c5ed5); # u64 833 &data_word(0xa3030242,0xd807aa98); # u64 834 &data_word(0x45706fbe,0x12835b01); # u64 835 &data_word(0x4ee4b28c,0x243185be); # u64 836 &data_word(0xd5ffb4e2,0x550c7dc3); # u64 837 &data_word(0xf27b896f,0x72be5d74); # u64 838 &data_word(0x3b1696b1,0x80deb1fe); # u64 839 &data_word(0x25c71235,0x9bdc06a7); # u64 840 &data_word(0xcf692694,0xc19bf174); # u64 841 &data_word(0x9ef14ad2,0xe49b69c1); # u64 842 &data_word(0x384f25e3,0xefbe4786); # u64 843 &data_word(0x8b8cd5b5,0x0fc19dc6); # u64 844 &data_word(0x77ac9c65,0x240ca1cc); # u64 845 &data_word(0x592b0275,0x2de92c6f); # u64 846 &data_word(0x6ea6e483,0x4a7484aa); # u64 847 &data_word(0xbd41fbd4,0x5cb0a9dc); # u64 848 &data_word(0x831153b5,0x76f988da); # u64 849 &data_word(0xee66dfab,0x983e5152); # u64 850 &data_word(0x2db43210,0xa831c66d); # u64 851 &data_word(0x98fb213f,0xb00327c8); # u64 852 &data_word(0xbeef0ee4,0xbf597fc7); # u64 853 &data_word(0x3da88fc2,0xc6e00bf3); # u64 854 &data_word(0x930aa725,0xd5a79147); # u64 855 &data_word(0xe003826f,0x06ca6351); # u64 856 &data_word(0x0a0e6e70,0x14292967); # u64 857 &data_word(0x46d22ffc,0x27b70a85); # u64 858 &data_word(0x5c26c926,0x2e1b2138); # u64 859 &data_word(0x5ac42aed,0x4d2c6dfc); # u64 860 &data_word(0x9d95b3df,0x53380d13); # u64 861 &data_word(0x8baf63de,0x650a7354); # u64 862 &data_word(0x3c77b2a8,0x766a0abb); # u64 863 &data_word(0x47edaee6,0x81c2c92e); # u64 864 &data_word(0x1482353b,0x92722c85); # u64 865 &data_word(0x4cf10364,0xa2bfe8a1); # u64 866 &data_word(0xbc423001,0xa81a664b); # u64 867 &data_word(0xd0f89791,0xc24b8b70); # u64 868 &data_word(0x0654be30,0xc76c51a3); # u64 869 &data_word(0xd6ef5218,0xd192e819); # u64 870 &data_word(0x5565a910,0xd6990624); # u64 871 &data_word(0x5771202a,0xf40e3585); # u64 872 &data_word(0x32bbd1b8,0x106aa070); # u64 873 &data_word(0xb8d2d0c8,0x19a4c116); # u64 874 &data_word(0x5141ab53,0x1e376c08); # u64 875 &data_word(0xdf8eeb99,0x2748774c); # u64 876 &data_word(0xe19b48a8,0x34b0bcb5); # u64 877 &data_word(0xc5c95a63,0x391c0cb3); # u64 878 &data_word(0xe3418acb,0x4ed8aa4a); # u64 879 &data_word(0x7763e373,0x5b9cca4f); # u64 880 &data_word(0xd6b2b8a3,0x682e6ff3); # u64 881 &data_word(0x5defb2fc,0x748f82ee); # u64 882 &data_word(0x43172f60,0x78a5636f); # u64 883 &data_word(0xa1f0ab72,0x84c87814); # u64 884 &data_word(0x1a6439ec,0x8cc70208); # u64 885 &data_word(0x23631e28,0x90befffa); # u64 886 &data_word(0xde82bde9,0xa4506ceb); # u64 887 &data_word(0xb2c67915,0xbef9a3f7); # u64 888 &data_word(0xe372532b,0xc67178f2); # u64 889 &data_word(0xea26619c,0xca273ece); # u64 890 &data_word(0x21c0c207,0xd186b8c7); # u64 891 &data_word(0xcde0eb1e,0xeada7dd6); # u64 892 &data_word(0xee6ed178,0xf57d4f7f); # u64 893 &data_word(0x72176fba,0x06f067aa); # u64 894 &data_word(0xa2c898a6,0x0a637dc5); # u64 895 &data_word(0xbef90dae,0x113f9804); # u64 896 &data_word(0x131c471b,0x1b710b35); # u64 897 &data_word(0x23047d84,0x28db77f5); # u64 898 &data_word(0x40c72493,0x32caab7b); # u64 899 &data_word(0x15c9bebc,0x3c9ebe0a); # u64 900 &data_word(0x9c100d4c,0x431d67c4); # u64 901 &data_word(0xcb3e42b6,0x4cc5d4be); # u64 902 &data_word(0xfc657e2a,0x597f299c); # u64 903 &data_word(0x3ad6faec,0x5fcb6fab); # u64 904 &data_word(0x4a475817,0x6c44198c); # u64 905 906 &data_word(0x04050607,0x00010203); # byte swap 907 &data_word(0x0c0d0e0f,0x08090a0b); # mask 908&function_end_B("sha512_block_data_order"); 909&asciz("SHA512 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); 910 911&asm_finish(); 912