1#ifndef __SOUND_OPL3_H 2#define __SOUND_OPL3_H 3 4/* 5 * Definitions of the OPL-3 registers. 6 * 7 * Copyright (c) by Jaroslav Kysela <perex@perex.cz>, 8 * Hannu Savolainen 1993-1996 9 * 10 * 11 * The OPL-3 mode is switched on by writing 0x01, to the offset 5 12 * of the right side. 13 * 14 * Another special register at the right side is at offset 4. It contains 15 * a bit mask defining which voices are used as 4 OP voices. 16 * 17 * The percussive mode is implemented in the left side only. 18 * 19 * With the above exceptions the both sides can be operated independently. 20 * 21 * A 4 OP voice can be created by setting the corresponding 22 * bit at offset 4 of the right side. 23 * 24 * For example setting the rightmost bit (0x01) changes the 25 * first voice on the right side to the 4 OP mode. The fourth 26 * voice is made inaccessible. 27 * 28 * If a voice is set to the 2 OP mode, it works like 2 OP modes 29 * of the original YM3812 (AdLib). In addition the voice can 30 * be connected the left, right or both stereo channels. It can 31 * even be left unconnected. This works with 4 OP voices also. 32 * 33 * The stereo connection bits are located in the FEEDBACK_CONNECTION 34 * register of the voice (0xC0-0xC8). In 4 OP voices these bits are 35 * in the second half of the voice. 36 * 37 * 38 * This program is free software; you can redistribute it and/or modify 39 * it under the terms of the GNU General Public License as published by 40 * the Free Software Foundation; either version 2 of the License, or 41 * (at your option) any later version. 42 * 43 * This program is distributed in the hope that it will be useful, 44 * but WITHOUT ANY WARRANTY; without even the implied warranty of 45 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 46 * GNU General Public License for more details. 47 * 48 * You should have received a copy of the GNU General Public License 49 * along with this program; if not, write to the Free Software 50 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 51 * 52 */ 53 54#include <sound/core.h> 55#include <sound/hwdep.h> 56#include <sound/timer.h> 57#include <sound/seq_midi_emul.h> 58#ifdef CONFIG_SND_SEQUENCER_OSS 59#include <sound/seq_oss.h> 60#include <sound/seq_oss_legacy.h> 61#endif 62#include <sound/seq_device.h> 63#include <sound/asound_fm.h> 64 65/* 66 * Register numbers for the global registers 67 */ 68 69#define OPL3_REG_TEST 0x01 70#define OPL3_ENABLE_WAVE_SELECT 0x20 71 72#define OPL3_REG_TIMER1 0x02 73#define OPL3_REG_TIMER2 0x03 74#define OPL3_REG_TIMER_CONTROL 0x04 /* Left side */ 75#define OPL3_IRQ_RESET 0x80 76#define OPL3_TIMER1_MASK 0x40 77#define OPL3_TIMER2_MASK 0x20 78#define OPL3_TIMER1_START 0x01 79#define OPL3_TIMER2_START 0x02 80 81#define OPL3_REG_CONNECTION_SELECT 0x04 /* Right side */ 82#define OPL3_LEFT_4OP_0 0x01 83#define OPL3_LEFT_4OP_1 0x02 84#define OPL3_LEFT_4OP_2 0x04 85#define OPL3_RIGHT_4OP_0 0x08 86#define OPL3_RIGHT_4OP_1 0x10 87#define OPL3_RIGHT_4OP_2 0x20 88 89#define OPL3_REG_MODE 0x05 /* Right side */ 90#define OPL3_OPL3_ENABLE 0x01 /* OPL3 mode */ 91#define OPL3_OPL4_ENABLE 0x02 /* OPL4 mode */ 92 93#define OPL3_REG_KBD_SPLIT 0x08 /* Left side */ 94#define OPL3_COMPOSITE_SINE_WAVE_MODE 0x80 /* Don't use with OPL-3? */ 95#define OPL3_KEYBOARD_SPLIT 0x40 96 97#define OPL3_REG_PERCUSSION 0xbd /* Left side only */ 98#define OPL3_TREMOLO_DEPTH 0x80 99#define OPL3_VIBRATO_DEPTH 0x40 100#define OPL3_PERCUSSION_ENABLE 0x20 101#define OPL3_BASSDRUM_ON 0x10 102#define OPL3_SNAREDRUM_ON 0x08 103#define OPL3_TOMTOM_ON 0x04 104#define OPL3_CYMBAL_ON 0x02 105#define OPL3_HIHAT_ON 0x01 106 107/* 108 * Offsets to the register banks for operators. To get the 109 * register number just add the operator offset to the bank offset 110 * 111 * AM/VIB/EG/KSR/Multiple (0x20 to 0x35) 112 */ 113#define OPL3_REG_AM_VIB 0x20 114#define OPL3_TREMOLO_ON 0x80 115#define OPL3_VIBRATO_ON 0x40 116#define OPL3_SUSTAIN_ON 0x20 117#define OPL3_KSR 0x10 /* Key scaling rate */ 118#define OPL3_MULTIPLE_MASK 0x0f /* Frequency multiplier */ 119 120 /* 121 * KSL/Total level (0x40 to 0x55) 122 */ 123#define OPL3_REG_KSL_LEVEL 0x40 124#define OPL3_KSL_MASK 0xc0 /* Envelope scaling bits */ 125#define OPL3_TOTAL_LEVEL_MASK 0x3f /* Strength (volume) of OP */ 126 127/* 128 * Attack / Decay rate (0x60 to 0x75) 129 */ 130#define OPL3_REG_ATTACK_DECAY 0x60 131#define OPL3_ATTACK_MASK 0xf0 132#define OPL3_DECAY_MASK 0x0f 133 134/* 135 * Sustain level / Release rate (0x80 to 0x95) 136 */ 137#define OPL3_REG_SUSTAIN_RELEASE 0x80 138#define OPL3_SUSTAIN_MASK 0xf0 139#define OPL3_RELEASE_MASK 0x0f 140 141/* 142 * Wave select (0xE0 to 0xF5) 143 */ 144#define OPL3_REG_WAVE_SELECT 0xe0 145#define OPL3_WAVE_SELECT_MASK 0x07 146 147/* 148 * Offsets to the register banks for voices. Just add to the 149 * voice number to get the register number. 150 * 151 * F-Number low bits (0xA0 to 0xA8). 152 */ 153#define OPL3_REG_FNUM_LOW 0xa0 154 155/* 156 * F-number high bits / Key on / Block (octave) (0xB0 to 0xB8) 157 */ 158#define OPL3_REG_KEYON_BLOCK 0xb0 159#define OPL3_KEYON_BIT 0x20 160#define OPL3_BLOCKNUM_MASK 0x1c 161#define OPL3_FNUM_HIGH_MASK 0x03 162 163/* 164 * Feedback / Connection (0xc0 to 0xc8) 165 * 166 * These registers have two new bits when the OPL-3 mode 167 * is selected. These bits controls connecting the voice 168 * to the stereo channels. For 4 OP voices this bit is 169 * defined in the second half of the voice (add 3 to the 170 * register offset). 171 * 172 * For 4 OP voices the connection bit is used in the 173 * both halves (gives 4 ways to connect the operators). 174 */ 175#define OPL3_REG_FEEDBACK_CONNECTION 0xc0 176#define OPL3_FEEDBACK_MASK 0x0e /* Valid just for 1st OP of a voice */ 177#define OPL3_CONNECTION_BIT 0x01 178/* 179 * In the 4 OP mode there is four possible configurations how the 180 * operators can be connected together (in 2 OP modes there is just 181 * AM or FM). The 4 OP connection mode is defined by the rightmost 182 * bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves. 183 * 184 * First half Second half Mode 185 * 186 * +---+ 187 * v | 188 * 0 0 >+-1-+--2--3--4--> 189 * 190 * 191 * 192 * +---+ 193 * | | 194 * 0 1 >+-1-+--2-+ 195 * |-> 196 * >--3----4-+ 197 * 198 * +---+ 199 * | | 200 * 1 0 >+-1-+-----+ 201 * |-> 202 * >--2--3--4-+ 203 * 204 * +---+ 205 * | | 206 * 1 1 >+-1-+--+ 207 * | 208 * >--2--3-+-> 209 * | 210 * >--4----+ 211 */ 212#define OPL3_STEREO_BITS 0x30 /* OPL-3 only */ 213#define OPL3_VOICE_TO_LEFT 0x10 214#define OPL3_VOICE_TO_RIGHT 0x20 215 216/* 217 218 */ 219 220#define OPL3_LEFT 0x0000 221#define OPL3_RIGHT 0x0100 222 223#define OPL3_HW_AUTO 0x0000 224#define OPL3_HW_OPL2 0x0200 225#define OPL3_HW_OPL3 0x0300 226#define OPL3_HW_OPL3_SV 0x0301 /* S3 SonicVibes */ 227#define OPL3_HW_OPL3_CS 0x0302 /* CS4232/CS4236+ */ 228#define OPL3_HW_OPL3_FM801 0x0303 /* FM801 */ 229#define OPL3_HW_OPL3_CS4281 0x0304 /* CS4281 */ 230#define OPL3_HW_OPL4 0x0400 /* YMF278B/YMF295 */ 231#define OPL3_HW_OPL4_ML 0x0401 /* YMF704/YMF721 */ 232#define OPL3_HW_MASK 0xff00 233 234#define MAX_OPL2_VOICES 9 235#define MAX_OPL3_VOICES 18 236 237struct snd_opl3; 238 239/* 240 * Instrument record, aka "Patch" 241 */ 242 243/* FM operator */ 244struct fm_operator { 245 unsigned char am_vib; 246 unsigned char ksl_level; 247 unsigned char attack_decay; 248 unsigned char sustain_release; 249 unsigned char wave_select; 250} __attribute__((packed)); 251 252/* Instrument data */ 253struct fm_instrument { 254 struct fm_operator op[4]; 255 unsigned char feedback_connection[2]; 256 unsigned char echo_delay; 257 unsigned char echo_atten; 258 unsigned char chorus_spread; 259 unsigned char trnsps; 260 unsigned char fix_dur; 261 unsigned char modes; 262 unsigned char fix_key; 263}; 264 265/* type */ 266#define FM_PATCH_OPL2 0x01 /* OPL2 2 operators FM instrument */ 267#define FM_PATCH_OPL3 0x02 /* OPL3 4 operators FM instrument */ 268 269/* Instrument record */ 270struct fm_patch { 271 unsigned char prog; 272 unsigned char bank; 273 unsigned char type; 274 struct fm_instrument inst; 275 char name[24]; 276 struct fm_patch *next; 277}; 278 279 280/* 281 * A structure to keep track of each hardware voice 282 */ 283struct snd_opl3_voice { 284 int state; /* status */ 285#define SNDRV_OPL3_ST_OFF 0 /* Not playing */ 286#define SNDRV_OPL3_ST_ON_2OP 1 /* 2op voice is allocated */ 287#define SNDRV_OPL3_ST_ON_4OP 2 /* 4op voice is allocated */ 288#define SNDRV_OPL3_ST_NOT_AVAIL -1 /* voice is not available */ 289 290 unsigned int time; /* An allocation time */ 291 unsigned char note; /* Note currently assigned to this voice */ 292 293 unsigned long note_off; /* note-off time */ 294 int note_off_check; /* check note-off time */ 295 296 unsigned char keyon_reg; /* KON register shadow */ 297 298 struct snd_midi_channel *chan; /* Midi channel for this note */ 299}; 300 301struct snd_opl3 { 302 unsigned long l_port; 303 unsigned long r_port; 304 struct resource *res_l_port; 305 struct resource *res_r_port; 306 unsigned short hardware; 307 /* hardware access */ 308 void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val); 309 unsigned short timer_enable; 310 int seq_dev_num; /* sequencer device number */ 311 struct snd_timer *timer1; 312 struct snd_timer *timer2; 313 spinlock_t timer_lock; 314 315 void *private_data; 316 void (*private_free)(struct snd_opl3 *); 317 318 struct snd_hwdep *hwdep; 319 spinlock_t reg_lock; 320 struct snd_card *card; /* The card that this belongs to */ 321 unsigned char fm_mode; /* OPL mode, see SNDRV_DM_FM_MODE_XXX */ 322 unsigned char rhythm; /* percussion mode flag */ 323 unsigned char max_voices; /* max number of voices */ 324#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) 325#define SNDRV_OPL3_MODE_SYNTH 0 /* OSS - voices allocated by application */ 326#define SNDRV_OPL3_MODE_SEQ 1 /* ALSA - driver handles voice allocation */ 327 int synth_mode; /* synth mode */ 328 int seq_client; 329 330 struct snd_seq_device *seq_dev; /* sequencer device */ 331 struct snd_midi_channel_set * chset; 332 333#ifdef CONFIG_SND_SEQUENCER_OSS 334 struct snd_seq_device *oss_seq_dev; /* OSS sequencer device */ 335 struct snd_midi_channel_set * oss_chset; 336#endif 337 338#define OPL3_PATCH_HASH_SIZE 32 339 struct fm_patch *patch_table[OPL3_PATCH_HASH_SIZE]; 340 341 struct snd_opl3_voice voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */ 342 int use_time; /* allocation counter */ 343 344 unsigned short connection_reg; /* connection reg shadow */ 345 unsigned char drum_reg; /* percussion reg shadow */ 346 347 spinlock_t voice_lock; /* Lock for voice access */ 348 349 struct timer_list tlist; /* timer for note-offs and effects */ 350 int sys_timer_status; /* system timer run status */ 351 spinlock_t sys_timer_lock; /* Lock for system timer access */ 352#endif 353}; 354 355/* opl3.c */ 356void snd_opl3_interrupt(struct snd_hwdep * hw); 357int snd_opl3_new(struct snd_card *card, unsigned short hardware, 358 struct snd_opl3 **ropl3); 359int snd_opl3_init(struct snd_opl3 *opl3); 360int snd_opl3_create(struct snd_card *card, 361 unsigned long l_port, unsigned long r_port, 362 unsigned short hardware, 363 int integrated, 364 struct snd_opl3 ** opl3); 365int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev); 366int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device, 367 struct snd_hwdep ** rhwdep); 368 369/* opl3_synth */ 370int snd_opl3_open(struct snd_hwdep * hw, struct file *file); 371int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, 372 unsigned int cmd, unsigned long arg); 373int snd_opl3_release(struct snd_hwdep * hw, struct file *file); 374 375void snd_opl3_reset(struct snd_opl3 * opl3); 376 377#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) 378long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, 379 loff_t *offset); 380int snd_opl3_load_patch(struct snd_opl3 *opl3, 381 int prog, int bank, int type, 382 const char *name, 383 const unsigned char *ext, 384 const unsigned char *data); 385struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank, 386 int create_patch); 387void snd_opl3_clear_patches(struct snd_opl3 *opl3); 388#else 389#define snd_opl3_write NULL 390static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {} 391#endif 392 393#endif /* __SOUND_OPL3_H */ 394