• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/drivers/staging/rtl8192e/ieee80211/
1/*
2 * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
3 * remains copyright by the original authors
4 *
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
7 *
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
9 * <jkmaline@cc.hut.fi>
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
11 *
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
15 *
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
22 * more details.
23 */
24#ifndef IEEE80211_H
25#define IEEE80211_H
26#include <linux/if_ether.h> /* ETH_ALEN */
27#include <linux/kernel.h>   /* ARRAY_SIZE */
28#include <linux/version.h>
29#include <linux/module.h>
30#include <linux/jiffies.h>
31#include <linux/timer.h>
32#include <linux/sched.h>
33#include <linux/semaphore.h>
34
35#include <linux/delay.h>
36#include <linux/wireless.h>
37
38#include "rtl819x_HT.h"
39#include "rtl819x_BA.h"
40#include "rtl819x_TS.h"
41
42#ifndef IW_MODE_MONITOR
43#define IW_MODE_MONITOR 6
44#endif
45
46#ifndef IWEVCUSTOM
47#define IWEVCUSTOM 0x8c02
48#endif
49
50#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
51#ifndef __bitwise
52#define __bitwise __attribute__((bitwise))
53#endif
54typedef __u16  __le16;
55#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
56struct iw_spy_data{
57	/* --- Standard spy support --- */
58	int 			spy_number;
59	u_char 			spy_address[IW_MAX_SPY][ETH_ALEN];
60	struct iw_quality	spy_stat[IW_MAX_SPY];
61	/* --- Enhanced spy support (event) */
62	struct iw_quality	spy_thr_low; /* Low threshold */
63	struct iw_quality	spy_thr_high; /* High threshold */
64	u_char			spy_thr_under[IW_MAX_SPY];
65};
66#endif
67#endif
68
69#ifndef container_of
70/**
71 * container_of - cast a member of a structure out to the containing structure
72 *
73 * @ptr:        the pointer to the member.
74 * @type:       the type of the container struct this is embedded in.
75 * @member:     the name of the member within the struct.
76 *
77 */
78#define container_of(ptr, type, member) ({                      \
79        const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
80        (type *)( (char *)__mptr - offsetof(type,member) );})
81#endif
82
83#define KEY_TYPE_NA		0x0
84#define KEY_TYPE_WEP40 		0x1
85#define KEY_TYPE_TKIP		0x2
86#define KEY_TYPE_CCMP		0x4
87#define KEY_TYPE_WEP104		0x5
88
89/* added for rtl819x tx procedure */
90#define MAX_QUEUE_SIZE		0x10
91
92//
93// 8190 queue mapping
94//
95#define BK_QUEUE                               0
96#define BE_QUEUE                               1
97#define VI_QUEUE                               2
98#define VO_QUEUE                               3
99#define HCCA_QUEUE                             4
100#define TXCMD_QUEUE                            5
101#define MGNT_QUEUE                             6
102#define HIGH_QUEUE                             7
103#define BEACON_QUEUE                           8
104
105#define LOW_QUEUE                              BE_QUEUE
106#define NORMAL_QUEUE                           MGNT_QUEUE
107
108//added by amy for ps
109#define SWRF_TIMEOUT				50
110
111//added by amy for LEAP related
112#define IE_CISCO_FLAG_POSITION		0x08	// Flag byte: byte 8, numbered from 0.
113#define SUPPORT_CKIP_MIC			0x08	// bit3
114#define SUPPORT_CKIP_PK			0x10	// bit4
115/* defined for skb cb field */
116/* At most 28 byte */
117typedef struct cb_desc {
118        /* Tx Desc Related flags (8-9) */
119	u8 bLastIniPkt:1;
120	u8 bCmdOrInit:1;
121        u8 bFirstSeg:1;
122        u8 bLastSeg:1;
123        u8 bEncrypt:1;
124        u8 bTxDisableRateFallBack:1;
125        u8 bTxUseDriverAssingedRate:1;
126        u8 bHwSec:1; //indicate whether use Hw security. WB
127
128        u8 reserved1;
129
130        /* Tx Firmware Relaged flags (10-11)*/
131        u8 bCTSEnable:1;
132        u8 bRTSEnable:1;
133        u8 bUseShortGI:1;
134        u8 bUseShortPreamble:1;
135        u8 bTxEnableFwCalcDur:1;
136        u8 bAMPDUEnable:1;
137        u8 bRTSSTBC:1;
138        u8 RTSSC:1;
139
140        u8 bRTSBW:1;
141        u8 bPacketBW:1;
142	u8 bRTSUseShortPreamble:1;
143	u8 bRTSUseShortGI:1;
144	u8 bMulticast:1;
145	u8 bBroadcast:1;
146        //u8 reserved2:2;
147        u8 drv_agg_enable:1;
148        u8 reserved2:1;
149
150        /* Tx Desc related element(12-19) */
151        u8 rata_index;
152        u8 queue_index;
153        //u8 reserved3;
154        //u8 reserved4;
155        u16 txbuf_size;
156        //u8 reserved5;
157	u8 RATRIndex;
158        u8 reserved6;
159        u8 reserved7;
160        u8 reserved8;
161
162        /* Tx firmware related element(20-27) */
163        u8 data_rate;
164        u8 rts_rate;
165        u8 ampdu_factor;
166        u8 ampdu_density;
167        //u8 reserved9;
168        //u8 reserved10;
169        //u8 reserved11;
170        u8 DrvAggrNum;
171	u16 pkt_size;
172        u8 reserved12;
173
174	u8 bdhcp;
175}cb_desc, *pcb_desc;
176
177/*--------------------------Define -------------------------------------------*/
178#define MGN_1M                  0x02
179#define MGN_2M                  0x04
180#define MGN_5_5M                0x0b
181#define MGN_11M                 0x16
182
183#define MGN_6M                  0x0c
184#define MGN_9M                  0x12
185#define MGN_12M                 0x18
186#define MGN_18M                 0x24
187#define MGN_24M                 0x30
188#define MGN_36M                 0x48
189#define MGN_48M                 0x60
190#define MGN_54M                 0x6c
191
192#define MGN_MCS0                0x80
193#define MGN_MCS1                0x81
194#define MGN_MCS2                0x82
195#define MGN_MCS3                0x83
196#define MGN_MCS4                0x84
197#define MGN_MCS5                0x85
198#define MGN_MCS6                0x86
199#define MGN_MCS7                0x87
200#define MGN_MCS8                0x88
201#define MGN_MCS9                0x89
202#define MGN_MCS10               0x8a
203#define MGN_MCS11               0x8b
204#define MGN_MCS12               0x8c
205#define MGN_MCS13               0x8d
206#define MGN_MCS14               0x8e
207#define MGN_MCS15               0x8f
208
209//----------------------------------------------------------------------------
210//		802.11 Management frame Reason Code field
211//----------------------------------------------------------------------------
212enum	_ReasonCode{
213	unspec_reason	= 0x1,
214	auth_not_valid	= 0x2,
215	deauth_lv_ss	= 0x3,
216	inactivity		= 0x4,
217	ap_overload 	= 0x5,
218	class2_err		= 0x6,
219	class3_err		= 0x7,
220	disas_lv_ss 	= 0x8,
221	asoc_not_auth	= 0x9,
222
223	//----MIC_CHECK
224	mic_failure 	= 0xe,
225	//----END MIC_CHECK
226
227	// Reason code defined in 802.11i D10.0 p.28.
228	invalid_IE		= 0x0d,
229	four_way_tmout	= 0x0f,
230	two_way_tmout	= 0x10,
231	IE_dismatch 	= 0x11,
232	invalid_Gcipher = 0x12,
233	invalid_Pcipher = 0x13,
234	invalid_AKMP	= 0x14,
235	unsup_RSNIEver = 0x15,
236	invalid_RSNIE	= 0x16,
237	auth_802_1x_fail= 0x17,
238	ciper_reject		= 0x18,
239
240	// Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
241	QoS_unspec		= 0x20, // 32
242	QAP_bandwidth	= 0x21, // 33
243	poor_condition	= 0x22, // 34
244	no_facility 	= 0x23, // 35
245							// Where is 36???
246	req_declined	= 0x25, // 37
247	invalid_param	= 0x26, // 38
248	req_not_honored= 0x27,	// 39
249	TS_not_created	= 0x2F, // 47
250	DL_not_allowed	= 0x30, // 48
251	dest_not_exist	= 0x31, // 49
252	dest_not_QSTA	= 0x32, // 50
253};
254
255
256
257#define aSifsTime	 (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
258
259#define MGMT_QUEUE_NUM 5
260
261#define IEEE_CMD_SET_WPA_PARAM			1
262#define	IEEE_CMD_SET_WPA_IE			2
263#define IEEE_CMD_SET_ENCRYPTION			3
264#define IEEE_CMD_MLME				4
265
266#define IEEE_PARAM_WPA_ENABLED			1
267#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
268#define IEEE_PARAM_DROP_UNENCRYPTED		3
269#define IEEE_PARAM_PRIVACY_INVOKED		4
270#define IEEE_PARAM_AUTH_ALGS			5
271#define IEEE_PARAM_IEEE_802_1X			6
272//It should consistent with the driver_XXX.c
273//   David, 2006.9.26
274#define IEEE_PARAM_WPAX_SELECT			7
275//Added for notify the encryption type selection
276//   David, 2006.9.26
277#define IEEE_PROTO_WPA				1
278#define IEEE_PROTO_RSN				2
279//Added for notify the encryption type selection
280//   David, 2006.9.26
281#define IEEE_WPAX_USEGROUP			0
282#define IEEE_WPAX_WEP40				1
283#define IEEE_WPAX_TKIP				2
284#define IEEE_WPAX_WRAP   			3
285#define IEEE_WPAX_CCMP				4
286#define IEEE_WPAX_WEP104			5
287
288#define IEEE_KEY_MGMT_IEEE8021X			1
289#define IEEE_KEY_MGMT_PSK			2
290
291#define IEEE_MLME_STA_DEAUTH			1
292#define IEEE_MLME_STA_DISASSOC			2
293
294
295#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
296#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
297#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED	4
298#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
299#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED	6
300#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
301
302
303#define	IEEE_CRYPT_ALG_NAME_LEN			16
304
305#define MAX_IE_LEN  0xff
306
307// added for kernel conflict
308#define ieee80211_crypt_deinit_entries 	ieee80211_crypt_deinit_entries_rsl
309#define ieee80211_crypt_deinit_handler 	ieee80211_crypt_deinit_handler_rsl
310#define ieee80211_crypt_delayed_deinit 	ieee80211_crypt_delayed_deinit_rsl
311#define ieee80211_register_crypto_ops  	ieee80211_register_crypto_ops_rsl
312#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
313#define ieee80211_get_crypto_ops 	ieee80211_get_crypto_ops_rsl
314
315#define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
316
317#define ieee80211_tkip_null		ieee80211_tkip_null_rsl
318
319#define ieee80211_wep_null		ieee80211_wep_null_rsl
320
321#define free_ieee80211          	free_ieee80211_rsl
322#define alloc_ieee80211        		alloc_ieee80211_rsl
323
324#define ieee80211_rx 			ieee80211_rx_rsl
325#define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
326
327#define ieee80211_get_beacon		ieee80211_get_beacon_rsl
328#define ieee80211_rtl_wake_queue		ieee80211_rtl_wake_queue_rsl
329#define ieee80211_rtl_stop_queue		ieee80211_rtl_stop_queue_rsl
330#define ieee80211_reset_queue		ieee80211_reset_queue_rsl
331#define ieee80211_softmac_stop_protocol	ieee80211_softmac_stop_protocol_rsl
332#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
333#define ieee80211_is_shortslot		ieee80211_is_shortslot_rsl
334#define ieee80211_is_54g		ieee80211_is_54g_rsl
335#define ieee80211_wpa_supplicant_ioctl	ieee80211_wpa_supplicant_ioctl_rsl
336#define ieee80211_ps_tx_ack		ieee80211_ps_tx_ack_rsl
337#define ieee80211_softmac_xmit		ieee80211_softmac_xmit_rsl
338#define ieee80211_stop_send_beacons	ieee80211_stop_send_beacons_rsl
339#define notify_wx_assoc_event		notify_wx_assoc_event_rsl
340#define SendDisassociation		SendDisassociation_rsl
341#define ieee80211_disassociate		ieee80211_disassociate_rsl
342#define ieee80211_start_send_beacons	ieee80211_start_send_beacons_rsl
343#define ieee80211_stop_scan		ieee80211_stop_scan_rsl
344#define ieee80211_send_probe_requests	ieee80211_send_probe_requests_rsl
345#define ieee80211_softmac_scan_syncro	ieee80211_softmac_scan_syncro_rsl
346#define ieee80211_start_scan_syncro	ieee80211_start_scan_syncro_rsl
347
348#define ieee80211_wx_get_essid		ieee80211_wx_get_essid_rsl
349#define ieee80211_wx_set_essid		ieee80211_wx_set_essid_rsl
350#define ieee80211_wx_set_rate		ieee80211_wx_set_rate_rsl
351#define ieee80211_wx_get_rate		ieee80211_wx_get_rate_rsl
352#define ieee80211_wx_set_wap		ieee80211_wx_set_wap_rsl
353#define ieee80211_wx_get_wap		ieee80211_wx_get_wap_rsl
354#define ieee80211_wx_set_mode		ieee80211_wx_set_mode_rsl
355#define ieee80211_wx_get_mode		ieee80211_wx_get_mode_rsl
356#define ieee80211_wx_set_scan		ieee80211_wx_set_scan_rsl
357#define ieee80211_wx_get_freq		ieee80211_wx_get_freq_rsl
358#define ieee80211_wx_set_freq		ieee80211_wx_set_freq_rsl
359#define ieee80211_wx_set_rawtx		ieee80211_wx_set_rawtx_rsl
360#define ieee80211_wx_get_name		ieee80211_wx_get_name_rsl
361#define ieee80211_wx_set_power		ieee80211_wx_set_power_rsl
362#define ieee80211_wx_get_power		ieee80211_wx_get_power_rsl
363#define ieee80211_wlan_frequencies	ieee80211_wlan_frequencies_rsl
364#define ieee80211_wx_set_rts		ieee80211_wx_set_rts_rsl
365#define ieee80211_wx_get_rts		ieee80211_wx_get_rts_rsl
366
367#define ieee80211_txb_free		ieee80211_txb_free_rsl
368
369#define ieee80211_wx_set_gen_ie		ieee80211_wx_set_gen_ie_rsl
370#define ieee80211_wx_get_scan		ieee80211_wx_get_scan_rsl
371#define ieee80211_wx_set_encode		ieee80211_wx_set_encode_rsl
372#define ieee80211_wx_get_encode		ieee80211_wx_get_encode_rsl
373#if WIRELESS_EXT >= 18
374#define ieee80211_wx_set_mlme		ieee80211_wx_set_mlme_rsl
375#define ieee80211_wx_set_auth		ieee80211_wx_set_auth_rsl
376#define ieee80211_wx_set_encode_ext	ieee80211_wx_set_encode_ext_rsl
377#define ieee80211_wx_get_encode_ext	ieee80211_wx_get_encode_ext_rsl
378#endif
379
380
381typedef struct ieee_param {
382	u32 cmd;
383	u8 sta_addr[ETH_ALEN];
384        union {
385		struct {
386			u8 name;
387			u32 value;
388		} wpa_param;
389		struct {
390			u32 len;
391			u8 reserved[32];
392			u8 data[0];
393		} wpa_ie;
394	        struct{
395			int command;
396    			int reason_code;
397		} mlme;
398		struct {
399			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
400			u8 set_tx;
401			u32 err;
402			u8 idx;
403			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
404			u16 key_len;
405			u8 key[0];
406		} crypt;
407	} u;
408}ieee_param;
409
410
411#if WIRELESS_EXT < 17
412#define IW_QUAL_QUAL_INVALID   0x10
413#define IW_QUAL_LEVEL_INVALID  0x20
414#define IW_QUAL_NOISE_INVALID  0x40
415#define IW_QUAL_QUAL_UPDATED   0x1
416#define IW_QUAL_LEVEL_UPDATED  0x2
417#define IW_QUAL_NOISE_UPDATED  0x4
418#endif
419
420// linux under 2.6.9 release may not support it, so modify it for common use
421#define MSECS(t) msecs_to_jiffies(t)
422#define msleep_interruptible_rsl  msleep_interruptible
423
424#define IEEE80211_DATA_LEN		2304
425/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
426   6.2.1.1.2.
427
428   The figure in section 7.1.2 suggests a body size of up to 2312
429   bytes is allowed, which is a bit confusing, I suspect this
430   represents the 2304 bytes of real data, plus a possible 8 bytes of
431   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
432#define IEEE80211_1ADDR_LEN 10
433#define IEEE80211_2ADDR_LEN 16
434#define IEEE80211_3ADDR_LEN 24
435#define IEEE80211_4ADDR_LEN 30
436#define IEEE80211_FCS_LEN    4
437#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
438#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
439#define IEEE80211_MGMT_HDR_LEN 24
440#define IEEE80211_DATA_HDR3_LEN 24
441#define IEEE80211_DATA_HDR4_LEN 30
442
443#define MIN_FRAG_THRESHOLD     256U
444#define MAX_FRAG_THRESHOLD     2346U
445
446
447/* Frame control field constants */
448#define IEEE80211_FCTL_VERS		0x0003
449#define IEEE80211_FCTL_FTYPE		0x000c
450#define IEEE80211_FCTL_STYPE		0x00f0
451#define IEEE80211_FCTL_FRAMETYPE	0x00fc
452#define IEEE80211_FCTL_TODS		0x0100
453#define IEEE80211_FCTL_FROMDS		0x0200
454#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
455#define IEEE80211_FCTL_MOREFRAGS	0x0400
456#define IEEE80211_FCTL_RETRY		0x0800
457#define IEEE80211_FCTL_PM		0x1000
458#define IEEE80211_FCTL_MOREDATA		0x2000
459#define IEEE80211_FCTL_WEP		0x4000
460#define IEEE80211_FCTL_ORDER		0x8000
461
462#define IEEE80211_FTYPE_MGMT		0x0000
463#define IEEE80211_FTYPE_CTL		0x0004
464#define IEEE80211_FTYPE_DATA		0x0008
465
466/* management */
467#define IEEE80211_STYPE_ASSOC_REQ	0x0000
468#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
469#define IEEE80211_STYPE_REASSOC_REQ	0x0020
470#define IEEE80211_STYPE_REASSOC_RESP	0x0030
471#define IEEE80211_STYPE_PROBE_REQ	0x0040
472#define IEEE80211_STYPE_PROBE_RESP	0x0050
473#define IEEE80211_STYPE_BEACON		0x0080
474#define IEEE80211_STYPE_ATIM		0x0090
475#define IEEE80211_STYPE_DISASSOC	0x00A0
476#define IEEE80211_STYPE_AUTH		0x00B0
477#define IEEE80211_STYPE_DEAUTH		0x00C0
478#define IEEE80211_STYPE_MANAGE_ACT	0x00D0
479
480/* control */
481#define IEEE80211_STYPE_PSPOLL		0x00A0
482#define IEEE80211_STYPE_RTS		0x00B0
483#define IEEE80211_STYPE_CTS		0x00C0
484#define IEEE80211_STYPE_ACK		0x00D0
485#define IEEE80211_STYPE_CFEND		0x00E0
486#define IEEE80211_STYPE_CFENDACK	0x00F0
487#define IEEE80211_STYPE_BLOCKACK   0x0094
488
489/* data */
490#define IEEE80211_STYPE_DATA		0x0000
491#define IEEE80211_STYPE_DATA_CFACK	0x0010
492#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
493#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
494#define IEEE80211_STYPE_NULLFUNC	0x0040
495#define IEEE80211_STYPE_CFACK		0x0050
496#define IEEE80211_STYPE_CFPOLL		0x0060
497#define IEEE80211_STYPE_CFACKPOLL	0x0070
498#define IEEE80211_STYPE_QOS_DATA	0x0080 //added for WMM 2006/8/2
499#define IEEE80211_STYPE_QOS_NULL	0x00C0
500
501#define IEEE80211_SCTL_FRAG		0x000F
502#define IEEE80211_SCTL_SEQ		0xFFF0
503
504/* QOS control */
505#define IEEE80211_QCTL_TID              0x000F
506
507#define	FC_QOS_BIT					BIT7
508#define IsDataFrame(pdu)			( ((pdu[0] & 0x0C)==0x08) ? true : false )
509#define	IsLegacyDataFrame(pdu)	(IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
510//added by wb. Is this right?
511#define IsQoSDataFrame(pframe)  ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
512#define Frame_Order(pframe)     (*(u16*)pframe&IEEE80211_FCTL_ORDER)
513#define SN_LESS(a, b)		(((a-b)&0x800)!=0)
514#define SN_EQUAL(a, b)	(a == b)
515#define MAX_DEV_ADDR_SIZE 8
516typedef enum _ACT_CATEGORY{
517        ACT_CAT_QOS = 1,
518        ACT_CAT_DLS = 2,
519        ACT_CAT_BA  = 3,
520        ACT_CAT_HT  = 7,
521        ACT_CAT_WMM = 17,
522} ACT_CATEGORY, *PACT_CATEGORY;
523
524typedef enum _TS_ACTION{
525        ACT_ADDTSREQ = 0,
526        ACT_ADDTSRSP = 1,
527        ACT_DELTS    = 2,
528        ACT_SCHEDULE = 3,
529} TS_ACTION, *PTS_ACTION;
530
531typedef enum _BA_ACTION{
532        ACT_ADDBAREQ = 0,
533        ACT_ADDBARSP = 1,
534        ACT_DELBA    = 2,
535} BA_ACTION, *PBA_ACTION;
536
537typedef enum _InitialGainOpType{
538	IG_Backup=0,
539	IG_Restore,
540	IG_Max
541}InitialGainOpType;
542
543/* debug macros */
544#define CONFIG_IEEE80211_DEBUG
545#ifdef CONFIG_IEEE80211_DEBUG
546extern u32 ieee80211_debug_level;
547#define IEEE80211_DEBUG(level, fmt, args...) \
548do { if (ieee80211_debug_level & (level)) \
549  printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
550//wb added to debug out data buf
551//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
552#define IEEE80211_DEBUG_DATA(level, data, datalen)	\
553	do{ if ((ieee80211_debug_level & (level)) == (level))	\
554		{ 	\
555			int i;					\
556			u8* pdata = (u8*) data;			\
557			printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__);	\
558			for(i=0; i<(int)(datalen); i++)			\
559			{						\
560				printk("%2x ", pdata[i]);		\
561				if ((i+1)%16 == 0) printk("\n");	\
562			}				\
563			printk("\n");			\
564		}					\
565	} while (0)
566#else
567#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
568#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
569#endif	/* CONFIG_IEEE80211_DEBUG */
570
571/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
572
573
574#define IEEE80211_DL_INFO          (1<<0)
575#define IEEE80211_DL_WX            (1<<1)
576#define IEEE80211_DL_SCAN          (1<<2)
577#define IEEE80211_DL_STATE         (1<<3)
578#define IEEE80211_DL_MGMT          (1<<4)
579#define IEEE80211_DL_FRAG          (1<<5)
580#define IEEE80211_DL_EAP           (1<<6)
581#define IEEE80211_DL_DROP          (1<<7)
582
583#define IEEE80211_DL_TX            (1<<8)
584#define IEEE80211_DL_RX            (1<<9)
585
586#define IEEE80211_DL_HT		   (1<<10)  //HT
587#define IEEE80211_DL_BA		   (1<<11)  //ba
588#define IEEE80211_DL_TS		   (1<<12)  //TS
589#define IEEE80211_DL_QOS           (1<<13)
590#define IEEE80211_DL_REORDER	   (1<<14)
591#define IEEE80211_DL_IOT	   (1<<15)
592#define IEEE80211_DL_IPS	   (1<<16)
593#define IEEE80211_DL_TRACE	   (1<<29)  //trace function, need to user net_ratelimit() together in order not to print too much to the screen
594#define IEEE80211_DL_DATA	   (1<<30)   //use this flag to control whether print data buf out.
595#define IEEE80211_DL_ERR	   (1<<31)   //always open
596#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
597#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
598#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
599
600#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
601#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
602#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
603#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
604#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
605#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
606#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
607#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
608#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
609#define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
610
611#ifdef CONFIG_IEEE80211_DEBUG
612/* Added by Annie, 2005-11-22. */
613#define MAX_STR_LEN     64
614/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
615#define PRINTABLE(_ch)  (_ch>'!' && _ch<'~')
616#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)                            	\
617                        if((_Comp) & level)   							\
618                        {                                                                       \
619                                int             __i;                                            \
620                                u8  buffer[MAX_STR_LEN];                                    	\
621                                int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ;  	\
622                                memset(buffer, 0, MAX_STR_LEN);                      		\
623                                memcpy(buffer, (u8 *)_Ptr, length );            		\
624                                for( __i=0; __i<MAX_STR_LEN; __i++ )                            \
625                                {                                                               \
626                                     if( !PRINTABLE(buffer[__i]) )   buffer[__i] = '?';     	\
627                                }                                                               \
628                                buffer[length] = '\0';                                          \
629                                printk("Rtl819x: ");                                         	\
630                                printk(_TitleString);                                         \
631                                printk(": %d, <%s>\n", _Len, buffer);                         \
632                        }
633#else
634#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)  do {} while (0)
635#endif
636
637#include <linux/netdevice.h>
638#include <linux/if_arp.h> /* ARPHRD_ETHER */
639
640#ifndef WIRELESS_SPY
641#define WIRELESS_SPY		// enable iwspy support
642#endif
643#include <net/iw_handler.h>	// new driver API
644
645#ifndef ETH_P_PAE
646#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
647#endif /* ETH_P_PAE */
648
649#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
650
651#ifndef ETH_P_80211_RAW
652#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
653#endif
654
655/* IEEE 802.11 defines */
656
657#define P80211_OUI_LEN 3
658
659struct ieee80211_snap_hdr {
660
661        u8    dsap;   /* always 0xAA */
662        u8    ssap;   /* always 0xAA */
663        u8    ctrl;   /* always 0x03 */
664        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
665
666} __attribute__ ((packed));
667
668#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
669
670#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
671#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
672#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
673#define WLAN_FC_MORE_DATA(fc) ((fc) & IEEE80211_FCTL_MOREDATA)
674
675
676#define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
677#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
678#define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
679
680/* Authentication algorithms */
681#define WLAN_AUTH_OPEN 0
682#define WLAN_AUTH_SHARED_KEY 1
683#define WLAN_AUTH_LEAP 2
684
685#define WLAN_AUTH_CHALLENGE_LEN 128
686
687#define WLAN_CAPABILITY_BSS (1<<0)
688#define WLAN_CAPABILITY_IBSS (1<<1)
689#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
690#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
691#define WLAN_CAPABILITY_PRIVACY (1<<4)
692#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
693#define WLAN_CAPABILITY_PBCC (1<<6)
694#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
695#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
696#define WLAN_CAPABILITY_QOS (1<<9)
697#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
698#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
699
700/* 802.11g ERP information element */
701#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
702#define WLAN_ERP_USE_PROTECTION (1<<1)
703#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
704
705/* Status codes */
706enum ieee80211_statuscode {
707        WLAN_STATUS_SUCCESS = 0,
708        WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
709        WLAN_STATUS_CAPS_UNSUPPORTED = 10,
710        WLAN_STATUS_REASSOC_NO_ASSOC = 11,
711        WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
712        WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
713        WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
714        WLAN_STATUS_CHALLENGE_FAIL = 15,
715        WLAN_STATUS_AUTH_TIMEOUT = 16,
716        WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
717        WLAN_STATUS_ASSOC_DENIED_RATES = 18,
718        /* 802.11b */
719        WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
720        WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
721        WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
722        /* 802.11h */
723        WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
724        WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
725        WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
726        /* 802.11g */
727        WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
728        WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
729        /* 802.11i */
730        WLAN_STATUS_INVALID_IE = 40,
731        WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
732        WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
733        WLAN_STATUS_INVALID_AKMP = 43,
734        WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
735        WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
736        WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
737};
738
739/* Reason codes */
740enum ieee80211_reasoncode {
741        WLAN_REASON_UNSPECIFIED = 1,
742        WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
743        WLAN_REASON_DEAUTH_LEAVING = 3,
744        WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
745        WLAN_REASON_DISASSOC_AP_BUSY = 5,
746        WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
747        WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
748        WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
749        WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
750        /* 802.11h */
751        WLAN_REASON_DISASSOC_BAD_POWER = 10,
752        WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
753        /* 802.11i */
754        WLAN_REASON_INVALID_IE = 13,
755        WLAN_REASON_MIC_FAILURE = 14,
756        WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
757        WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
758        WLAN_REASON_IE_DIFFERENT = 17,
759        WLAN_REASON_INVALID_GROUP_CIPHER = 18,
760        WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
761        WLAN_REASON_INVALID_AKMP = 20,
762        WLAN_REASON_UNSUPP_RSN_VERSION = 21,
763        WLAN_REASON_INVALID_RSN_IE_CAP = 22,
764        WLAN_REASON_IEEE8021X_FAILED = 23,
765        WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
766};
767
768#define IEEE80211_STATMASK_SIGNAL (1<<0)
769#define IEEE80211_STATMASK_RSSI (1<<1)
770#define IEEE80211_STATMASK_NOISE (1<<2)
771#define IEEE80211_STATMASK_RATE (1<<3)
772#define IEEE80211_STATMASK_WEMASK 0x7
773
774#define IEEE80211_CCK_MODULATION    (1<<0)
775#define IEEE80211_OFDM_MODULATION   (1<<1)
776
777#define IEEE80211_24GHZ_BAND     (1<<0)
778#define IEEE80211_52GHZ_BAND     (1<<1)
779
780#define IEEE80211_CCK_RATE_LEN  		4
781#define IEEE80211_CCK_RATE_1MB		        0x02
782#define IEEE80211_CCK_RATE_2MB		        0x04
783#define IEEE80211_CCK_RATE_5MB		        0x0B
784#define IEEE80211_CCK_RATE_11MB		        0x16
785#define IEEE80211_OFDM_RATE_LEN 		8
786#define IEEE80211_OFDM_RATE_6MB		        0x0C
787#define IEEE80211_OFDM_RATE_9MB		        0x12
788#define IEEE80211_OFDM_RATE_12MB		0x18
789#define IEEE80211_OFDM_RATE_18MB		0x24
790#define IEEE80211_OFDM_RATE_24MB		0x30
791#define IEEE80211_OFDM_RATE_36MB		0x48
792#define IEEE80211_OFDM_RATE_48MB		0x60
793#define IEEE80211_OFDM_RATE_54MB		0x6C
794#define IEEE80211_BASIC_RATE_MASK		0x80
795
796#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
797#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
798#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
799#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
800#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
801#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
802#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
803#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
804#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
805#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
806#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
807#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
808
809#define IEEE80211_CCK_RATES_MASK	        0x0000000F
810#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
811	IEEE80211_CCK_RATE_2MB_MASK)
812#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
813        IEEE80211_CCK_RATE_5MB_MASK | \
814        IEEE80211_CCK_RATE_11MB_MASK)
815
816#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
817#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
818	IEEE80211_OFDM_RATE_12MB_MASK | \
819	IEEE80211_OFDM_RATE_24MB_MASK)
820#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
821	IEEE80211_OFDM_RATE_9MB_MASK  | \
822	IEEE80211_OFDM_RATE_18MB_MASK | \
823	IEEE80211_OFDM_RATE_36MB_MASK | \
824	IEEE80211_OFDM_RATE_48MB_MASK | \
825	IEEE80211_OFDM_RATE_54MB_MASK)
826#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
827                                IEEE80211_CCK_DEFAULT_RATES_MASK)
828
829#define IEEE80211_NUM_OFDM_RATES	    8
830#define IEEE80211_NUM_CCK_RATES	            4
831#define IEEE80211_OFDM_SHIFT_MASK_A         4
832
833
834/* this is stolen and modified from the madwifi driver*/
835#define IEEE80211_FC0_TYPE_MASK		0x0c
836#define IEEE80211_FC0_TYPE_DATA		0x08
837#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
838#define IEEE80211_FC0_SUBTYPE_QOS	0x80
839
840#define IEEE80211_QOS_HAS_SEQ(fc) \
841	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
842	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
843
844/* this is stolen from ipw2200 driver */
845#define IEEE_IBSS_MAC_HASH_SIZE 31
846struct ieee_ibss_seq {
847	u8 mac[ETH_ALEN];
848	u16 seq_num[17];
849	u16 frag_num[17];
850	unsigned long packet_time[17];
851	struct list_head list;
852};
853
854/* NOTE: This data is for statistical purposes; not all hardware provides this
855 *       information for frames received.  Not setting these will not cause
856 *       any adverse affects. */
857struct ieee80211_rx_stats {
858	u32 mac_time[2];
859	s8 rssi;
860	u8 signal;
861	u8 noise;
862	u16 rate; /* in 100 kbps */
863	u8 received_channel;
864	u8 control;
865	u8 mask;
866	u8 freq;
867	u16 len;
868	u64 tsf;
869	u32 beacon_time;
870	u8 nic_type;
871	u16       Length;
872	//      u8        DataRate;      // In 0.5 Mbps
873	u8        SignalQuality; // in 0-100 index.
874	s32       RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
875	s8        RxPower; // in dBm Translate from PWdB
876	u8        SignalStrength; // in 0-100 index.
877	u16       bHwError:1;
878	u16       bCRC:1;
879	u16       bICV:1;
880	u16       bShortPreamble:1;
881	u16       Antenna:1;      //for rtl8185
882	u16       Decrypted:1;    //for rtl8185, rtl8187
883	u16       Wakeup:1;       //for rtl8185
884	u16       Reserved0:1;    //for rtl8185
885	u8        AGC;
886	u32       TimeStampLow;
887	u32       TimeStampHigh;
888	bool      bShift;
889	bool      bIsQosData;             // Added by Annie, 2005-12-22.
890	u8        UserPriority;
891
892	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
893	//1Attention Please!!!<11n or 8190 specific code should be put below this line>
894	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
895
896	u8        RxDrvInfoSize;
897	u8        RxBufShift;
898	bool      bIsAMPDU;
899	bool      bFirstMPDU;
900	bool      bContainHTC;
901	bool      RxIs40MHzPacket;
902	u32       RxPWDBAll;
903	u8        RxMIMOSignalStrength[4];        // in 0~100 index
904	s8        RxMIMOSignalQuality[2];
905	bool      bPacketMatchBSSID;
906	bool      bIsCCK;
907	bool      bPacketToSelf;
908	//added by amy
909	u8*       virtual_address;
910	u16          packetlength;              // Total packet length: Must equal to sum of all FragLength
911	u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
912	u16          fragoffset;                        // Data offset for this fragment
913	u16          ntotalfrag;
914	bool      	  bisrxaggrsubframe;
915	bool		  bPacketBeacon;	//cosa add for rssi
916	bool		  bToSelfBA;		//cosa add for rssi
917	char 	  cck_adc_pwdb[4];	//cosa add for rx path selection
918	u16		  Seq_Num;
919
920};
921
922/* IEEE 802.11 requires that STA supports concurrent reception of at least
923 * three fragmented frames. This define can be increased to support more
924 * concurrent frames, but it should be noted that each entry can consume about
925 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
926#define IEEE80211_FRAG_CACHE_LEN 4
927
928struct ieee80211_frag_entry {
929	unsigned long first_frag_time;
930	unsigned int seq;
931	unsigned int last_frag;
932	struct sk_buff *skb;
933	u8 src_addr[ETH_ALEN];
934	u8 dst_addr[ETH_ALEN];
935};
936
937struct ieee80211_stats {
938	unsigned int tx_unicast_frames;
939	unsigned int tx_multicast_frames;
940	unsigned int tx_fragments;
941	unsigned int tx_unicast_octets;
942	unsigned int tx_multicast_octets;
943	unsigned int tx_deferred_transmissions;
944	unsigned int tx_single_retry_frames;
945	unsigned int tx_multiple_retry_frames;
946	unsigned int tx_retry_limit_exceeded;
947	unsigned int tx_discards;
948	unsigned int rx_unicast_frames;
949	unsigned int rx_multicast_frames;
950	unsigned int rx_fragments;
951	unsigned int rx_unicast_octets;
952	unsigned int rx_multicast_octets;
953	unsigned int rx_fcs_errors;
954	unsigned int rx_discards_no_buffer;
955	unsigned int tx_discards_wrong_sa;
956	unsigned int rx_discards_undecryptable;
957	unsigned int rx_message_in_msg_fragments;
958	unsigned int rx_message_in_bad_msg_fragments;
959};
960
961struct ieee80211_device;
962
963#include "ieee80211_crypt.h"
964
965#define SEC_KEY_1         (1<<0)
966#define SEC_KEY_2         (1<<1)
967#define SEC_KEY_3         (1<<2)
968#define SEC_KEY_4         (1<<3)
969#define SEC_ACTIVE_KEY    (1<<4)
970#define SEC_AUTH_MODE     (1<<5)
971#define SEC_UNICAST_GROUP (1<<6)
972#define SEC_LEVEL         (1<<7)
973#define SEC_ENABLED       (1<<8)
974#define SEC_ENCRYPT       (1<<9)
975
976#define SEC_LEVEL_0      0 /* None */
977#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
978#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
979#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
980#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
981
982#define SEC_ALG_NONE            0
983#define SEC_ALG_WEP             1
984#define SEC_ALG_TKIP            2
985#define SEC_ALG_CCMP            4
986
987#define WEP_KEYS 		4
988#define WEP_KEY_LEN		13
989#define SCM_KEY_LEN             32
990#define SCM_TEMPORAL_KEY_LENGTH 16
991
992struct ieee80211_security {
993	u16 active_key:2,
994            enabled:1,
995	    auth_mode:2,
996            auth_algo:4,
997            unicast_uses_group:1,
998	    encrypt:1;
999	u8 key_sizes[WEP_KEYS];
1000	u8 keys[WEP_KEYS][SCM_KEY_LEN];
1001	u8 level;
1002	u16 flags;
1003} __attribute__ ((packed));
1004
1005
1006/*
1007 802.11 data frame from AP
1008      ,-------------------------------------------------------------------.
1009Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
1010      |------|------|---------|---------|---------|------|---------|------|
1011Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
1012      |      | tion | (BSSID) |         |         | ence |  data   |      |
1013      `-------------------------------------------------------------------'
1014Total: 28-2340 bytes
1015*/
1016
1017/* Management Frame Information Element Types */
1018enum ieee80211_mfie {
1019        MFIE_TYPE_SSID = 0,
1020        MFIE_TYPE_RATES = 1,
1021        MFIE_TYPE_FH_SET = 2,
1022        MFIE_TYPE_DS_SET = 3,
1023        MFIE_TYPE_CF_SET = 4,
1024        MFIE_TYPE_TIM = 5,
1025        MFIE_TYPE_IBSS_SET = 6,
1026        MFIE_TYPE_COUNTRY = 7,
1027        MFIE_TYPE_HOP_PARAMS = 8,
1028        MFIE_TYPE_HOP_TABLE = 9,
1029        MFIE_TYPE_REQUEST = 10,
1030        MFIE_TYPE_CHALLENGE = 16,
1031        MFIE_TYPE_POWER_CONSTRAINT = 32,
1032        MFIE_TYPE_POWER_CAPABILITY = 33,
1033        MFIE_TYPE_TPC_REQUEST = 34,
1034        MFIE_TYPE_TPC_REPORT = 35,
1035        MFIE_TYPE_SUPP_CHANNELS = 36,
1036        MFIE_TYPE_CSA = 37,
1037        MFIE_TYPE_MEASURE_REQUEST = 38,
1038        MFIE_TYPE_MEASURE_REPORT = 39,
1039        MFIE_TYPE_QUIET = 40,
1040        MFIE_TYPE_IBSS_DFS = 41,
1041        MFIE_TYPE_ERP = 42,
1042        MFIE_TYPE_RSN = 48,
1043        MFIE_TYPE_RATES_EX = 50,
1044        MFIE_TYPE_HT_CAP= 45,
1045	 MFIE_TYPE_HT_INFO= 61,
1046	 MFIE_TYPE_AIRONET=133,
1047        MFIE_TYPE_GENERIC = 221,
1048        MFIE_TYPE_QOS_PARAMETER = 222,
1049};
1050
1051/* Minimal header; can be used for passing 802.11 frames with sufficient
1052 * information to determine what type of underlying data type is actually
1053 * stored in the data. */
1054 struct ieee80211_pspoll_hdr {
1055        __le16 frame_ctl;
1056        __le16 aid;
1057	u8 bssid[ETH_ALEN];
1058        u8 ta[ETH_ALEN];
1059        //u8 payload[0];
1060} __attribute__ ((packed));
1061
1062struct ieee80211_hdr {
1063        __le16 frame_ctl;
1064        __le16 duration_id;
1065        u8 payload[0];
1066} __attribute__ ((packed));
1067
1068struct ieee80211_hdr_1addr {
1069        __le16 frame_ctl;
1070        __le16 duration_id;
1071        u8 addr1[ETH_ALEN];
1072        u8 payload[0];
1073} __attribute__ ((packed));
1074
1075struct ieee80211_hdr_2addr {
1076        __le16 frame_ctl;
1077        __le16 duration_id;
1078        u8 addr1[ETH_ALEN];
1079        u8 addr2[ETH_ALEN];
1080        u8 payload[0];
1081} __attribute__ ((packed));
1082
1083struct ieee80211_hdr_3addr {
1084	__le16 frame_ctl;
1085	__le16 duration_id;
1086	u8 addr1[ETH_ALEN];
1087	u8 addr2[ETH_ALEN];
1088	u8 addr3[ETH_ALEN];
1089	__le16 seq_ctl;
1090        u8 payload[0];
1091} __attribute__ ((packed));
1092
1093struct ieee80211_hdr_4addr {
1094	__le16 frame_ctl;
1095	__le16 duration_id;
1096	u8 addr1[ETH_ALEN];
1097	u8 addr2[ETH_ALEN];
1098	u8 addr3[ETH_ALEN];
1099	__le16 seq_ctl;
1100	u8 addr4[ETH_ALEN];
1101        u8 payload[0];
1102} __attribute__ ((packed));
1103
1104struct ieee80211_hdr_3addrqos {
1105	__le16 frame_ctl;
1106	__le16 duration_id;
1107	u8 addr1[ETH_ALEN];
1108	u8 addr2[ETH_ALEN];
1109	u8 addr3[ETH_ALEN];
1110	__le16 seq_ctl;
1111        u8 payload[0];
1112	__le16 qos_ctl;
1113} __attribute__ ((packed));
1114
1115struct ieee80211_hdr_4addrqos {
1116	__le16 frame_ctl;
1117	__le16 duration_id;
1118	u8 addr1[ETH_ALEN];
1119	u8 addr2[ETH_ALEN];
1120	u8 addr3[ETH_ALEN];
1121	__le16 seq_ctl;
1122	u8 addr4[ETH_ALEN];
1123        u8 payload[0];
1124	__le16 qos_ctl;
1125} __attribute__ ((packed));
1126
1127struct ieee80211_info_element {
1128	u8 id;
1129	u8 len;
1130	u8 data[0];
1131} __attribute__ ((packed));
1132
1133struct ieee80211_authentication {
1134	struct ieee80211_hdr_3addr header;
1135	__le16 algorithm;
1136	__le16 transaction;
1137	__le16 status;
1138	/*challenge*/
1139	struct ieee80211_info_element info_element[0];
1140} __attribute__ ((packed));
1141
1142struct ieee80211_disassoc {
1143        struct ieee80211_hdr_3addr header;
1144        __le16 reason;
1145} __attribute__ ((packed));
1146
1147struct ieee80211_probe_request {
1148	struct ieee80211_hdr_3addr header;
1149	/* SSID, supported rates */
1150        struct ieee80211_info_element info_element[0];
1151} __attribute__ ((packed));
1152
1153struct ieee80211_probe_response {
1154	struct ieee80211_hdr_3addr header;
1155	u32 time_stamp[2];
1156	__le16 beacon_interval;
1157	__le16 capability;
1158        /* SSID, supported rates, FH params, DS params,
1159         * CF params, IBSS params, TIM (if beacon), RSN */
1160        struct ieee80211_info_element info_element[0];
1161} __attribute__ ((packed));
1162
1163/* Alias beacon for probe_response */
1164#define ieee80211_beacon ieee80211_probe_response
1165
1166struct ieee80211_assoc_request_frame {
1167	struct ieee80211_hdr_3addr header;
1168	__le16 capability;
1169	__le16 listen_interval;
1170	/* SSID, supported rates, RSN */
1171        struct ieee80211_info_element info_element[0];
1172} __attribute__ ((packed));
1173
1174struct ieee80211_reassoc_request_frame {
1175	struct ieee80211_hdr_3addr header;
1176	__le16 capability;
1177	__le16 listen_interval;
1178	u8 current_ap[ETH_ALEN];
1179	/* SSID, supported rates, RSN */
1180        struct ieee80211_info_element info_element[0];
1181} __attribute__ ((packed));
1182
1183struct ieee80211_assoc_response_frame {
1184	struct ieee80211_hdr_3addr header;
1185	__le16 capability;
1186	__le16 status;
1187	__le16 aid;
1188	struct ieee80211_info_element info_element[0]; /* supported rates */
1189} __attribute__ ((packed));
1190
1191struct ieee80211_txb {
1192	u8 nr_frags;
1193	u8 encrypted;
1194	u8 queue_index;
1195	u8 rts_included;
1196	u16 reserved;
1197	__le16 frag_size;
1198	__le16 payload_size;
1199	struct sk_buff *fragments[0];
1200};
1201
1202#define MAX_TX_AGG_COUNT		  16
1203struct ieee80211_drv_agg_txb {
1204	u8 nr_drv_agg_frames;
1205	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
1206}__attribute__((packed));
1207
1208#define MAX_SUBFRAME_COUNT 		  64
1209struct ieee80211_rxb {
1210	u8 nr_subframes;
1211	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
1212	u8 dst[ETH_ALEN];
1213	u8 src[ETH_ALEN];
1214}__attribute__((packed));
1215
1216typedef union _frameqos {
1217	u16 shortdata;
1218	u8  chardata[2];
1219	struct {
1220		u16 tid:4;
1221		u16 eosp:1;
1222		u16 ack_policy:2;
1223		u16 reserved:1;
1224		u16 txop:8;
1225	}field;
1226}frameqos,*pframeqos;
1227
1228/* SWEEP TABLE ENTRIES NUMBER*/
1229#define MAX_SWEEP_TAB_ENTRIES		  42
1230#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
1231/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
1232 * only use 8, and then use extended rates for the remaining supported
1233 * rates.  Other APs, however, stick all of their supported rates on the
1234 * main rates information element... */
1235#define MAX_RATES_LENGTH                  ((u8)12)
1236#define MAX_RATES_EX_LENGTH               ((u8)16)
1237#define MAX_NETWORK_COUNT                  128
1238
1239#define MAX_CHANNEL_NUMBER                 161
1240#define IEEE80211_SOFTMAC_SCAN_TIME	   100
1241//(HZ / 2)
1242#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1243
1244#define CRC_LENGTH                 4U
1245
1246#define MAX_WPA_IE_LEN 64
1247
1248#define NETWORK_EMPTY_ESSID (1<<0)
1249#define NETWORK_HAS_OFDM    (1<<1)
1250#define NETWORK_HAS_CCK     (1<<2)
1251
1252/* QoS structure */
1253#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
1254#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
1255#define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
1256                                         NETWORK_HAS_QOS_INFORMATION)
1257/* 802.11h */
1258#define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
1259#define NETWORK_HAS_CSA                 (1<<6)
1260#define NETWORK_HAS_QUIET               (1<<7)
1261#define NETWORK_HAS_IBSS_DFS            (1<<8)
1262#define NETWORK_HAS_TPC_REPORT          (1<<9)
1263
1264#define NETWORK_HAS_ERP_VALUE           (1<<10)
1265
1266#define QOS_QUEUE_NUM                   4
1267#define QOS_OUI_LEN                     3
1268#define QOS_OUI_TYPE                    2
1269#define QOS_ELEMENT_ID                  221
1270#define QOS_OUI_INFO_SUB_TYPE           0
1271#define QOS_OUI_PARAM_SUB_TYPE          1
1272#define QOS_VERSION_1                   1
1273#define QOS_AIFSN_MIN_VALUE             2
1274struct ieee80211_qos_information_element {
1275        u8 elementID;
1276        u8 length;
1277        u8 qui[QOS_OUI_LEN];
1278        u8 qui_type;
1279        u8 qui_subtype;
1280        u8 version;
1281        u8 ac_info;
1282} __attribute__ ((packed));
1283
1284struct ieee80211_qos_ac_parameter {
1285        u8 aci_aifsn;
1286        u8 ecw_min_max;
1287        __le16 tx_op_limit;
1288} __attribute__ ((packed));
1289
1290struct ieee80211_qos_parameter_info {
1291        struct ieee80211_qos_information_element info_element;
1292        u8 reserved;
1293        struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
1294} __attribute__ ((packed));
1295
1296struct ieee80211_qos_parameters {
1297        __le16 cw_min[QOS_QUEUE_NUM];
1298        __le16 cw_max[QOS_QUEUE_NUM];
1299        u8 aifs[QOS_QUEUE_NUM];
1300        u8 flag[QOS_QUEUE_NUM];
1301        __le16 tx_op_limit[QOS_QUEUE_NUM];
1302} __attribute__ ((packed));
1303
1304struct ieee80211_qos_data {
1305        struct ieee80211_qos_parameters parameters;
1306        int active;
1307        int supported;
1308        u8 param_count;
1309        u8 old_param_count;
1310};
1311
1312struct ieee80211_tim_parameters {
1313        u8 tim_count;
1314        u8 tim_period;
1315} __attribute__ ((packed));
1316
1317//#else
1318struct ieee80211_wmm_ac_param {
1319	u8 ac_aci_acm_aifsn;
1320	u8 ac_ecwmin_ecwmax;
1321	u16 ac_txop_limit;
1322};
1323
1324struct ieee80211_wmm_ts_info {
1325	u8 ac_dir_tid;
1326	u8 ac_up_psb;
1327	u8 reserved;
1328} __attribute__ ((packed));
1329
1330struct ieee80211_wmm_tspec_elem {
1331	struct ieee80211_wmm_ts_info ts_info;
1332	u16 norm_msdu_size;
1333	u16 max_msdu_size;
1334	u32 min_serv_inter;
1335	u32 max_serv_inter;
1336	u32 inact_inter;
1337	u32 suspen_inter;
1338	u32 serv_start_time;
1339	u32 min_data_rate;
1340	u32 mean_data_rate;
1341	u32 peak_data_rate;
1342	u32 max_burst_size;
1343	u32 delay_bound;
1344	u32 min_phy_rate;
1345	u16 surp_band_allow;
1346	u16 medium_time;
1347}__attribute__((packed));
1348enum eap_type {
1349	EAP_PACKET = 0,
1350	EAPOL_START,
1351	EAPOL_LOGOFF,
1352	EAPOL_KEY,
1353	EAPOL_ENCAP_ASF_ALERT
1354};
1355
1356static const char *eap_types[] = {
1357	[EAP_PACKET]		= "EAP-Packet",
1358	[EAPOL_START]		= "EAPOL-Start",
1359	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
1360	[EAPOL_KEY]		= "EAPOL-Key",
1361	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
1362};
1363
1364static inline const char *eap_get_type(int type)
1365{
1366	return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
1367}
1368//added by amy for reorder
1369static inline u8 Frame_QoSTID(u8* buf)
1370{
1371	struct ieee80211_hdr_3addr *hdr;
1372	u16 fc;
1373	hdr = (struct ieee80211_hdr_3addr *)buf;
1374	fc = le16_to_cpu(hdr->frame_ctl);
1375	return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
1376}
1377
1378//added by amy for reorder
1379
1380struct eapol {
1381	u8 snap[6];
1382	u16 ethertype;
1383	u8 version;
1384	u8 type;
1385	u16 length;
1386} __attribute__ ((packed));
1387
1388struct ieee80211_softmac_stats{
1389	unsigned int rx_ass_ok;
1390	unsigned int rx_ass_err;
1391	unsigned int rx_probe_rq;
1392	unsigned int tx_probe_rs;
1393	unsigned int tx_beacons;
1394	unsigned int rx_auth_rq;
1395	unsigned int rx_auth_rs_ok;
1396	unsigned int rx_auth_rs_err;
1397	unsigned int tx_auth_rq;
1398	unsigned int no_auth_rs;
1399	unsigned int no_ass_rs;
1400	unsigned int tx_ass_rq;
1401	unsigned int rx_ass_rq;
1402	unsigned int tx_probe_rq;
1403	unsigned int reassoc;
1404	unsigned int swtxstop;
1405	unsigned int swtxawake;
1406	unsigned char CurrentShowTxate;
1407	unsigned char last_packet_rate;
1408	unsigned int txretrycount;
1409};
1410
1411#define BEACON_PROBE_SSID_ID_POSITION 12
1412
1413struct ieee80211_info_element_hdr {
1414	u8 id;
1415	u8 len;
1416} __attribute__ ((packed));
1417
1418/*
1419 * These are the data types that can make up management packets
1420 *
1421	u16 auth_algorithm;
1422	u16 auth_sequence;
1423	u16 beacon_interval;
1424	u16 capability;
1425	u8 current_ap[ETH_ALEN];
1426	u16 listen_interval;
1427	struct {
1428		u16 association_id:14, reserved:2;
1429	} __attribute__ ((packed));
1430	u32 time_stamp[2];
1431	u16 reason;
1432	u16 status;
1433*/
1434
1435#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1436#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1437
1438enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
1439#define MAX_SP_Len  (WMM_all_frame << 4)
1440#define IEEE80211_QOS_TID 0x0f
1441#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1442
1443#define IEEE80211_DTIM_MBCAST 4
1444#define IEEE80211_DTIM_UCAST 2
1445#define IEEE80211_DTIM_VALID 1
1446#define IEEE80211_DTIM_INVALID 0
1447
1448#define IEEE80211_PS_DISABLED 0
1449#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1450#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1451
1452//added by David for QoS 2006/6/30
1453//#define WMM_Hang_8187
1454#ifdef WMM_Hang_8187
1455#undef WMM_Hang_8187
1456#endif
1457
1458#define WME_AC_BK   0x00
1459#define WME_AC_BE   0x01
1460#define WME_AC_VI   0x02
1461#define WME_AC_VO   0x03
1462#define WME_ACI_MASK 0x03
1463#define WME_AIFSN_MASK 0x03
1464#define WME_AC_PRAM_LEN 16
1465
1466#define MAX_RECEIVE_BUFFER_SIZE 9100
1467
1468//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1469//#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
1470#define UP2AC(up) (		   \
1471	((up) < 1) ? WME_AC_BE : \
1472	((up) < 3) ? WME_AC_BK : \
1473	((up) < 4) ? WME_AC_BE : \
1474	((up) < 6) ? WME_AC_VI : \
1475	WME_AC_VO)
1476//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1477#define AC2UP(_ac)	(       \
1478	((_ac) == WME_AC_VO) ? 6 : \
1479	((_ac) == WME_AC_VI) ? 5 : \
1480	((_ac) == WME_AC_BK) ? 1 : \
1481	0)
1482
1483#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
1484#define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
1485
1486struct	ether_header {
1487	u8 ether_dhost[ETHER_ADDR_LEN];
1488	u8 ether_shost[ETHER_ADDR_LEN];
1489	u16 ether_type;
1490} __attribute__((packed));
1491
1492#ifndef ETHERTYPE_PAE
1493#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
1494#endif
1495#ifndef ETHERTYPE_IP
1496#define	ETHERTYPE_IP	0x0800		/* IP protocol */
1497#endif
1498
1499typedef struct _bss_ht{
1500
1501	bool				support_ht;
1502
1503	// HT related elements
1504	u8					ht_cap_buf[32];
1505	u16					ht_cap_len;
1506	u8					ht_info_buf[32];
1507	u16					ht_info_len;
1508
1509	HT_SPEC_VER			ht_spec_ver;
1510	//HT_CAPABILITY_ELE			bdHTCapEle;
1511	//HT_INFORMATION_ELE		bdHTInfoEle;
1512
1513	bool				aggregation;
1514	bool				long_slot_time;
1515}bss_ht, *pbss_ht;
1516
1517typedef enum _erp_t{
1518	ERP_NonERPpresent	= 0x01,
1519	ERP_UseProtection	= 0x02,
1520	ERP_BarkerPreambleMode = 0x04,
1521} erp_t;
1522
1523
1524struct ieee80211_network {
1525	/* These entries are used to identify a unique network */
1526	u8 bssid[ETH_ALEN];
1527	u8 channel;
1528	/* Ensure null-terminated for any debug msgs */
1529	u8 ssid[IW_ESSID_MAX_SIZE + 1];
1530	u8 ssid_len;
1531        struct ieee80211_qos_data qos_data;
1532
1533	//added by amy for LEAP
1534	bool	bWithAironetIE;
1535	bool	bCkipSupported;
1536	bool	bCcxRmEnable;
1537	u16 	CcxRmState[2];
1538	// CCXv4 S59, MBSSID.
1539	bool	bMBssidValid;
1540	u8	MBssidMask;
1541	u8	MBssid[6];
1542	// CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1543	bool	bWithCcxVerNum;
1544	u8	BssCcxVerNumber;
1545	/* These are network statistics */
1546	struct ieee80211_rx_stats stats;
1547	u16 capability;
1548	u8  rates[MAX_RATES_LENGTH];
1549	u8  rates_len;
1550	u8  rates_ex[MAX_RATES_EX_LENGTH];
1551	u8  rates_ex_len;
1552	unsigned long last_scanned;
1553	u8  mode;
1554	u32 flags;
1555	u32 last_associate;
1556	u32 time_stamp[2];
1557	u16 beacon_interval;
1558	u16 listen_interval;
1559	u16 atim_window;
1560	u8  erp_value;
1561	u8  wpa_ie[MAX_WPA_IE_LEN];
1562	size_t wpa_ie_len;
1563	u8  rsn_ie[MAX_WPA_IE_LEN];
1564	size_t rsn_ie_len;
1565
1566        struct ieee80211_tim_parameters tim;
1567	u8  dtim_period;
1568	u8  dtim_data;
1569	u32 last_dtim_sta_time[2];
1570
1571        //appeded for QoS
1572        u8 wmm_info;
1573        struct ieee80211_wmm_ac_param wmm_param[4];
1574        u8 QoS_Enable;
1575#ifdef THOMAS_TURBO
1576	u8 Turbo_Enable;//enable turbo mode, added by thomas
1577#endif
1578#ifdef ENABLE_DOT11D
1579	u16 CountryIeLen;
1580	u8 CountryIeBuf[MAX_IE_LEN];
1581#endif
1582        // HT Related, by amy, 2008.04.29
1583	BSS_HT	bssht;
1584	// Add to handle broadcom AP management frame CCK rate.
1585	bool broadcom_cap_exist;
1586	bool ralink_cap_exist;
1587	bool atheros_cap_exist;
1588	bool cisco_cap_exist;
1589	bool marvell_cap_exist;
1590	bool unknown_cap_exist;
1591//	u8	berp_info;
1592	bool	berp_info_valid;
1593	bool buseprotection;
1594	//put at the end of the structure.
1595	struct list_head list;
1596};
1597
1598enum ieee80211_state {
1599
1600	/* the card is not linked at all */
1601	IEEE80211_NOLINK = 0,
1602
1603	/* IEEE80211_ASSOCIATING* are for BSS client mode
1604	 * the driver shall not perform RX filtering unless
1605	 * the state is LINKED.
1606	 * The driver shall just check for the state LINKED and
1607	 * defaults to NOLINK for ALL the other states (including
1608	 * LINKED_SCANNING)
1609	 */
1610
1611	/* the association procedure will start (wq scheduling)*/
1612	IEEE80211_ASSOCIATING,
1613	IEEE80211_ASSOCIATING_RETRY,
1614
1615	/* the association procedure is sending AUTH request*/
1616	IEEE80211_ASSOCIATING_AUTHENTICATING,
1617
1618	/* the association procedure has successfully authentcated
1619	 * and is sending association request
1620	 */
1621	IEEE80211_ASSOCIATING_AUTHENTICATED,
1622
1623	/* the link is ok. the card associated to a BSS or linked
1624	 * to a ibss cell or acting as an AP and creating the bss
1625	 */
1626	IEEE80211_LINKED,
1627
1628	/* same as LINKED, but the driver shall apply RX filter
1629	 * rules as we are in NO_LINK mode. As the card is still
1630	 * logically linked, but it is doing a syncro site survey
1631	 * then it will be back to LINKED state.
1632	 */
1633	IEEE80211_LINKED_SCANNING,
1634
1635};
1636
1637#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1638#define DEFAULT_FTS 2346
1639
1640#define CFG_IEEE80211_RESERVE_FCS (1<<0)
1641#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1642#define CFG_IEEE80211_RTS (1<<2)
1643
1644#define IEEE80211_24GHZ_MIN_CHANNEL 1
1645#define IEEE80211_24GHZ_MAX_CHANNEL 14
1646#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1647                                  IEEE80211_24GHZ_MIN_CHANNEL + 1)
1648
1649#define IEEE80211_52GHZ_MIN_CHANNEL 34
1650#define IEEE80211_52GHZ_MAX_CHANNEL 165
1651#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1652                                  IEEE80211_52GHZ_MIN_CHANNEL + 1)
1653
1654typedef struct tx_pending_t{
1655	int frag;
1656	struct ieee80211_txb *txb;
1657}tx_pending_t;
1658
1659typedef struct _bandwidth_autoswitch
1660{
1661	long threshold_20Mhzto40Mhz;
1662	long	threshold_40Mhzto20Mhz;
1663	bool bforced_tx20Mhz;
1664	bool bautoswitch_enable;
1665}bandwidth_autoswitch,*pbandwidth_autoswitch;
1666
1667
1668//added by amy for order
1669
1670#define REORDER_WIN_SIZE	128
1671#define REORDER_ENTRY_NUM	128
1672typedef struct _RX_REORDER_ENTRY
1673{
1674	struct list_head	List;
1675	u16			SeqNum;
1676	struct ieee80211_rxb* prxb;
1677} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
1678//added by amy for order
1679typedef enum _Fsync_State{
1680	Default_Fsync,
1681	HW_Fsync,
1682	SW_Fsync
1683}Fsync_State;
1684
1685// Power save mode configured.
1686typedef	enum _RT_PS_MODE
1687{
1688	eActive,	// Active/Continuous access.
1689	eMaxPs,		// Max power save mode.
1690	eFastPs		// Fast power save mode.
1691}RT_PS_MODE;
1692
1693typedef enum _IPS_CALLBACK_FUNCION
1694{
1695	IPS_CALLBACK_NONE = 0,
1696	IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
1697	IPS_CALLBACK_JOIN_REQUEST = 2,
1698}IPS_CALLBACK_FUNCION;
1699
1700typedef enum _RT_JOIN_ACTION{
1701	RT_JOIN_INFRA   = 1,
1702	RT_JOIN_IBSS  = 2,
1703	RT_START_IBSS = 3,
1704	RT_NO_ACTION  = 4,
1705}RT_JOIN_ACTION;
1706
1707typedef struct _IbssParms{
1708	u16   atimWin;
1709}IbssParms, *PIbssParms;
1710#define MAX_NUM_RATES	264 // Max num of support rates element: 8,  Max num of ext. support rate: 255. 061122, by rcnjko.
1711
1712// RF state.
1713typedef	enum _RT_RF_POWER_STATE
1714{
1715	eRfOn,
1716	eRfSleep,
1717	eRfOff
1718}RT_RF_POWER_STATE;
1719
1720typedef struct _RT_POWER_SAVE_CONTROL
1721{
1722
1723	//
1724	// Inactive Power Save(IPS) : Disable RF when disconnected
1725	//
1726	bool				bInactivePs;
1727	bool				bIPSModeBackup;
1728	bool				bSwRfProcessing;
1729	RT_RF_POWER_STATE	eInactivePowerState;
1730	struct work_struct 	InactivePsWorkItem;
1731	struct timer_list	InactivePsTimer;
1732
1733	// Return point for join action
1734	IPS_CALLBACK_FUNCION	ReturnPoint;
1735
1736	// Recored Parameters for rescheduled JoinRequest
1737	bool				bTmpBssDesc;
1738	RT_JOIN_ACTION		tmpJoinAction;
1739	struct ieee80211_network tmpBssDesc;
1740
1741	// Recored Parameters for rescheduled MgntLinkRequest
1742	bool				bTmpScanOnly;
1743	bool				bTmpActiveScan;
1744	bool				bTmpFilterHiddenAP;
1745	bool				bTmpUpdateParms;
1746	u8					tmpSsidBuf[33];
1747	OCTET_STRING			tmpSsid2Scan;
1748	bool				bTmpSsid2Scan;
1749	u8					tmpNetworkType;
1750	u8					tmpChannelNumber;
1751	u16					tmpBcnPeriod;
1752	u8					tmpDtimPeriod;
1753	u16					tmpmCap;
1754	OCTET_STRING			tmpSuppRateSet;
1755	u8					tmpSuppRateBuf[MAX_NUM_RATES];
1756	bool				bTmpSuppRate;
1757	IbssParms				tmpIbpm;
1758	bool				bTmpIbpm;
1759
1760	//
1761	// Leisre Poswer Save : Disable RF if connected but traffic is not busy
1762	//
1763	bool				bLeisurePs;
1764	u32				PowerProfile;
1765	u8				LpsIdleCount;
1766	u8				RegMaxLPSAwakeIntvl;
1767	u8				LPSAwakeIntvl;
1768
1769	u32				CurPsLevel;
1770	u32				RegRfPsLevel;
1771
1772	bool				bFwCtrlLPS;
1773	u8				FWCtrlPSMode;
1774
1775	bool				LinkReqInIPSRFOffPgs;
1776	bool				BufConnectinfoBefore;
1777
1778}RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
1779
1780typedef u32 RT_RF_CHANGE_SOURCE;
1781#define RF_CHANGE_BY_SW BIT31
1782#define RF_CHANGE_BY_HW BIT30
1783#define RF_CHANGE_BY_PS BIT29
1784#define RF_CHANGE_BY_IPS BIT28
1785#define RF_CHANGE_BY_INIT	0	// Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1786
1787#ifdef ENABLE_DOT11D
1788typedef enum
1789{
1790	COUNTRY_CODE_FCC = 0,
1791	COUNTRY_CODE_IC = 1,
1792	COUNTRY_CODE_ETSI = 2,
1793	COUNTRY_CODE_SPAIN = 3,
1794	COUNTRY_CODE_FRANCE = 4,
1795	COUNTRY_CODE_MKK = 5,
1796	COUNTRY_CODE_MKK1 = 6,
1797	COUNTRY_CODE_ISRAEL = 7,
1798	COUNTRY_CODE_TELEC,
1799	COUNTRY_CODE_MIC,
1800	COUNTRY_CODE_GLOBAL_DOMAIN
1801}country_code_type_t;
1802#endif
1803
1804#define RT_MAX_LD_SLOT_NUM	10
1805typedef struct _RT_LINK_DETECT_T{
1806
1807	u32				NumRecvBcnInPeriod;
1808	u32				NumRecvDataInPeriod;
1809
1810	u32				RxBcnNum[RT_MAX_LD_SLOT_NUM];	// number of Rx beacon / CheckForHang_period  to determine link status
1811	u32				RxDataNum[RT_MAX_LD_SLOT_NUM];	// number of Rx data / CheckForHang_period  to determine link status
1812	u16				SlotNum;	// number of CheckForHang period to determine link status
1813	u16				SlotIndex;
1814
1815	u32				NumTxOkInPeriod;
1816	u32				NumRxOkInPeriod;
1817	u32				NumRxUnicastOkInPeriod;
1818	bool				bBusyTraffic;
1819}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
1820
1821//added by amy 090330
1822typedef enum _HW_VARIABLES{
1823	HW_VAR_ETHER_ADDR,
1824	HW_VAR_MULTICAST_REG,
1825	HW_VAR_BASIC_RATE,
1826	HW_VAR_BSSID,
1827	HW_VAR_MEDIA_STATUS,
1828	HW_VAR_SECURITY_CONF,
1829	HW_VAR_BEACON_INTERVAL,
1830	HW_VAR_ATIM_WINDOW,
1831	HW_VAR_LISTEN_INTERVAL,
1832	HW_VAR_CS_COUNTER,
1833	HW_VAR_DEFAULTKEY0,
1834	HW_VAR_DEFAULTKEY1,
1835	HW_VAR_DEFAULTKEY2,
1836	HW_VAR_DEFAULTKEY3,
1837	HW_VAR_SIFS,
1838	HW_VAR_DIFS,
1839	HW_VAR_EIFS,
1840	HW_VAR_SLOT_TIME,
1841	HW_VAR_ACK_PREAMBLE,
1842	HW_VAR_CW_CONFIG,
1843	HW_VAR_CW_VALUES,
1844	HW_VAR_RATE_FALLBACK_CONTROL,
1845	HW_VAR_CONTENTION_WINDOW,
1846	HW_VAR_RETRY_COUNT,
1847	HW_VAR_TR_SWITCH,
1848	HW_VAR_COMMAND,			// For Command Register, Annie, 2006-04-07.
1849	HW_VAR_WPA_CONFIG,		//2004/08/23, kcwu, for 8187 Security config
1850	HW_VAR_AMPDU_MIN_SPACE,	// The spacing between sub-frame. Roger, 2008.07.04.
1851	HW_VAR_SHORTGI_DENSITY,	// The density for shortGI. Roger, 2008.07.04.
1852	HW_VAR_AMPDU_FACTOR,
1853	HW_VAR_MCS_RATE_AVAILABLE,
1854	HW_VAR_AC_PARAM,			// For AC Parameters, 2005.12.01, by rcnjko.
1855	HW_VAR_ACM_CTRL,			// For ACM Control, Annie, 2005-12-13.
1856	HW_VAR_DIS_Req_Qsize,		// For DIS_Reg_Qsize, Joseph
1857	HW_VAR_CCX_CHNL_LOAD,		// For CCX 2 channel load request, 2006.05.04.
1858	HW_VAR_CCX_NOISE_HISTOGRAM,	// For CCX 2 noise histogram request, 2006.05.04.
1859	HW_VAR_CCX_CLM_NHM,			// For CCX 2 parallel channel load request and noise histogram request, 2006.05.12.
1860	HW_VAR_TxOPLimit,				// For turbo mode related settings, added by Roger, 2006.12.07
1861	HW_VAR_TURBO_MODE,			// For turbo mode related settings, added by Roger, 2006.12.15.
1862	HW_VAR_RF_STATE, 			// For change or query RF power state, 061214, rcnjko.
1863	HW_VAR_RF_OFF_BY_HW,		// For UI to query if external HW signal disable RF, 061229, rcnjko.
1864	HW_VAR_BUS_SPEED, 		// In unit of bps. 2006.07.03, by rcnjko.
1865        HW_VAR_SET_DEV_POWER,	// Set to low power, added by LanHsin, 2007.
1866
1867	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
1868	//1Attention Please!!!<11n or 8190 specific code should be put below this line>
1869	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
1870	HW_VAR_RCR,				//for RCR, David 2006,05,11
1871	HW_VAR_RATR_0,
1872	HW_VAR_RRSR,
1873	HW_VAR_CPU_RST,
1874	HW_VAR_CECHK_BSSID,
1875        HW_VAR_LBK_MODE,			// Set lookback mode, 2008.06.11. added by Roger.
1876	// Set HW related setting for 11N AES bug.
1877	HW_VAR_AES_11N_FIX,
1878	// Set Usb Rx Aggregation
1879	HW_VAR_USB_RX_AGGR,
1880	HW_VAR_USER_CONTROL_TURBO_MODE,
1881	HW_VAR_RETRY_LIMIT,
1882#ifndef _RTL8192_EXT_PATCH_
1883	HW_VAR_INIT_TX_RATE,  //Get Current Tx rate register. 2008.12.10. Added by tynli
1884#endif
1885	HW_VAR_TX_RATE_REG,  //Get Current Tx rate register. 2008.12.10. Added by tynli
1886	HW_VAR_EFUSE_USAGE, //Get current EFUSE utilization. 2008.12.19. Added by Roger.
1887	HW_VAR_EFUSE_BYTES,
1888	HW_VAR_AUTOLOAD_STATUS, //Get current autoload status, 0: autoload success, 1: autoload fail. 2008.12.19. Added by Roger.
1889	HW_VAR_RF_2R_DISABLE, // 2R disable
1890	HW_VAR_SET_RPWM,
1891	HW_VAR_H2C_FW_PWRMODE, // For setting FW related H2C cmd structure. by tynli. 2009.2.18
1892	HW_VAR_H2C_FW_JOINBSSRPT, // For setting FW related H2C cmd structure. by tynli. 2009.2.18
1893	HW_VAR_1X1_RECV_COMBINE,	// For 1T2R but only 1SS, Add by hpfan 2009.04.16 hpfan
1894	HW_VAR_STOP_SEND_BEACON,
1895	HW_VAR_TSF_TIMER,			// Read from TSF register to get the current TSF timer, by Bruce, 2009-07-22.
1896	HW_VAR_IO_CMD,
1897	HW_VAR_HANDLE_FW_C2H,		//Added by tynli. For handling FW C2H command. 2009.10.07.
1898	HW_VAR_DL_FW_RSVD_PAGE, 		//Added by tynli. Download the packets that FW will use to RSVD page. 2009.10.14.
1899	HW_VAR_AID,				//Added by tynli.
1900	HW_VAR_HW_SEQ_ENABLE,		//Added by tynli. 2009.10.20.
1901	HW_VAR_UPDATE_TSF,			//Added by tynli. 2009.10.22. For Hw count TBTT time.
1902	HW_VAR_BCN_VALID,				//Added by tynli.
1903	HW_VAR_FWLPS_RF_ON			//Added by tynli. 2009.11.09. For checking if Fw finishs RF on sequence.
1904}HW_VARIABLES;
1905
1906#define RT_CHECK_FOR_HANG_PERIOD 2
1907
1908struct ieee80211_device {
1909	struct net_device *dev;
1910        struct ieee80211_security sec;
1911
1912	bool	need_sw_enc;
1913#ifdef ENABLE_LPS
1914	bool bAwakePktSent;
1915	u8  LPSDelayCnt;
1916	bool bIsAggregateFrame;
1917	bool polling;
1918	void (*LeisurePSLeave)(struct net_device *dev);
1919#endif
1920
1921#ifdef ENABLE_IPS
1922	bool proto_stoppping;
1923	bool wx_set_enc;
1924	struct semaphore ips_sem;
1925	struct work_struct ips_leave_wq;
1926        void (*ieee80211_ips_leave_wq) (struct net_device *dev);
1927        void (*ieee80211_ips_leave)(struct net_device *dev);
1928#endif
1929	void (*SetHwRegHandler)(struct net_device *dev,u8 variable,u8* val);
1930	u8   (*rtllib_ap_sec_type)(struct ieee80211_device *ieee);
1931
1932	//hw security related
1933//	u8 hwsec_support; //support?
1934	u8 hwsec_active;  //hw security active.
1935	bool is_silent_reset;
1936	bool is_roaming;
1937	bool ieee_up;
1938	//added by amy
1939	bool bSupportRemoteWakeUp;
1940	RT_PS_MODE	dot11PowerSaveMode; // Power save mode configured.
1941	bool actscanning;
1942	bool beinretry;
1943	RT_RF_POWER_STATE		eRFPowerState;
1944	RT_RF_CHANGE_SOURCE	RfOffReason;
1945	bool is_set_key;
1946	//11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1947
1948	//11n HT below
1949	PRT_HIGH_THROUGHPUT	pHTInfo;
1950	//struct timer_list		SwBwTimer;
1951//	spinlock_t chnlop_spinlock;
1952	spinlock_t bw_spinlock;
1953
1954	spinlock_t reorder_spinlock;
1955	// for HT operation rate set.  we use this one for HT data rate to separate different descriptors
1956	//the way fill this is the same as in the IE
1957	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
1958	u8	dot11HTOperationalRateSet[16];		//use RATR format
1959	u8	RegHTSuppRateSet[16];
1960	u8				HTCurrentOperaRate;
1961	u8				HTHighestOperaRate;
1962	//wb added for rate operation mode to firmware
1963	u8	bTxDisableRateFallBack;
1964	u8 	bTxUseDriverAssingedRate;
1965	atomic_t	atm_chnlop;
1966	atomic_t	atm_swbw;
1967//	u8	HTHighestOperaRate;
1968//	u8 	HTCurrentOperaRate;
1969
1970	// 802.11e and WMM Traffic Stream Info (TX)
1971	struct list_head		Tx_TS_Admit_List;
1972	struct list_head		Tx_TS_Pending_List;
1973	struct list_head		Tx_TS_Unused_List;
1974	TX_TS_RECORD		TxTsRecord[TOTAL_TS_NUM];
1975	// 802.11e and WMM Traffic Stream Info (RX)
1976	struct list_head		Rx_TS_Admit_List;
1977	struct list_head		Rx_TS_Pending_List;
1978	struct list_head		Rx_TS_Unused_List;
1979	RX_TS_RECORD		RxTsRecord[TOTAL_TS_NUM];
1980//#ifdef TO_DO_LIST
1981	RX_REORDER_ENTRY	RxReorderEntry[128];
1982	struct list_head		RxReorder_Unused_List;
1983//#endif
1984	// Qos related. Added by Annie, 2005-11-01.
1985//	PSTA_QOS			pStaQos;
1986	u8				ForcedPriority;		// Force per-packet priority 1~7. (default: 0, not to force it.)
1987
1988
1989	/* Bookkeeping structures */
1990	struct net_device_stats stats;
1991	struct ieee80211_stats ieee_stats;
1992	struct ieee80211_softmac_stats softmac_stats;
1993
1994	/* Probe / Beacon management */
1995	struct list_head network_free_list;
1996	struct list_head network_list;
1997	struct ieee80211_network *networks;
1998	int scans;
1999	int scan_age;
2000
2001	int iw_mode; /* operating mode (IW_MODE_*) */
2002	struct iw_spy_data spy_data;
2003
2004	spinlock_t lock;
2005	spinlock_t wpax_suitlist_lock;
2006
2007	int tx_headroom; /* Set to size of any additional room needed at front
2008			  * of allocated Tx SKBs */
2009	u32 config;
2010
2011	/* WEP and other encryption related settings at the device level */
2012	int open_wep; /* Set to 1 to allow unencrypted frames */
2013	int auth_mode;
2014	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
2015				 * WEP key changes */
2016
2017	/* If the host performs {en,de}cryption, then set to 1 */
2018	int host_encrypt;
2019	int host_encrypt_msdu;
2020	int host_decrypt;
2021        /* host performs multicast decryption */
2022        int host_mc_decrypt;
2023
2024        /* host should strip IV and ICV from protected frames */
2025        /* meaningful only when hardware decryption is being used */
2026        int host_strip_iv_icv;
2027
2028        int host_open_frag;
2029        int host_build_iv;
2030	int ieee802_1x; /* is IEEE 802.1X used */
2031
2032	/* WPA data */
2033	bool bHalfWirelessN24GMode;
2034	int wpa_enabled;
2035	int drop_unencrypted;
2036	int tkip_countermeasures;
2037	int privacy_invoked;
2038	size_t wpa_ie_len;
2039	u8 *wpa_ie;
2040	u8 ap_mac_addr[6];
2041	u16 pairwise_key_type;
2042	u16 group_key_type;
2043	struct list_head crypt_deinit_list;
2044	struct ieee80211_crypt_data *crypt[WEP_KEYS];
2045	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
2046	struct timer_list crypt_deinit_timer;
2047        int crypt_quiesced;
2048
2049	int bcrx_sta_key; /* use individual keys to override default keys even
2050			   * with RX of broad/multicast frames */
2051
2052	/* Fragmentation structures */
2053	// each streaming contain a entry
2054	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
2055	unsigned int frag_next_idx[17];
2056	u16 fts; /* Fragmentation Threshold */
2057#define DEFAULT_RTS_THRESHOLD 2346U
2058#define MIN_RTS_THRESHOLD 1
2059#define MAX_RTS_THRESHOLD 2346U
2060        u16 rts; /* RTS threshold */
2061
2062        /* Association info */
2063        u8 bssid[ETH_ALEN];
2064
2065	/* This stores infos for the current network.
2066	 * Either the network we are associated in INFRASTRUCTURE
2067	 * or the network that we are creating in MASTER mode.
2068	 * ad-hoc is a mixture ;-).
2069	 * Note that in infrastructure mode, even when not associated,
2070	 * fields bssid and essid may be valid (if wpa_set and essid_set
2071	 * are true) as thy carry the value set by the user via iwconfig
2072	 */
2073	struct ieee80211_network current_network;
2074
2075	enum ieee80211_state state;
2076
2077	int short_slot;
2078	int reg_mode;
2079	int mode;       /* A, B, G */
2080	int modulation; /* CCK, OFDM */
2081	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
2082	int abg_true;   /* ABG flag              */
2083
2084	/* used for forcing the ibss workqueue to terminate
2085	 * without wait for the syncro scan to terminate
2086	 */
2087	short sync_scan_hurryup;
2088
2089        int perfect_rssi;
2090        int worst_rssi;
2091
2092        u16 prev_seq_ctl;       /* used to drop duplicate frames */
2093
2094	/* map of allowed channels. 0 is dummy */
2095#ifdef ENABLE_DOT11D
2096	void* pDot11dInfo;
2097	bool bGlobalDomain;
2098#else
2099	int channel_map[MAX_CHANNEL_NUMBER+1];
2100#endif
2101	int rate;       /* current rate */
2102	int basic_rate;
2103	short active_scan;
2104
2105	/* this contains flags for selectively enable softmac support */
2106	u16 softmac_features;
2107
2108	/* if the sequence control field is not filled by HW */
2109	u16 seq_ctrl[5];
2110
2111	/* association procedure transaction sequence number */
2112	u16 associate_seq;
2113
2114	/* AID for RTXed association responses */
2115	u16 assoc_id;
2116
2117	/* power save mode related*/
2118	u8 ack_tx_to_ieee;
2119	short ps;
2120	short sta_sleep;
2121	int ps_timeout;
2122	int ps_period;
2123	struct tasklet_struct ps_task;
2124	u32 ps_th;
2125	u32 ps_tl;
2126
2127	short raw_tx;
2128	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
2129	short queue_stop;
2130	short scanning;
2131	short proto_started;
2132
2133	struct semaphore wx_sem;
2134	struct semaphore scan_sem;
2135
2136	spinlock_t mgmt_tx_lock;
2137	spinlock_t beacon_lock;
2138
2139	short beacon_txing;
2140
2141	short wap_set;
2142	short ssid_set;
2143
2144	u8  wpax_type_set;    //{added by David, 2006.9.28}
2145	u32 wpax_type_notify; //{added by David, 2006.9.26}
2146
2147	/* QoS related flag */
2148	char init_wmmparam_flag;
2149	/* set on initialization */
2150	u8  qos_support;
2151
2152	/* for discarding duplicated packets in IBSS */
2153	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
2154
2155	/* for discarding duplicated packets in BSS */
2156	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
2157	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
2158	unsigned long last_packet_time[17];
2159
2160	/* for PS mode */
2161	unsigned long last_rx_ps_time;
2162
2163	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
2164	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
2165	int mgmt_queue_head;
2166	int mgmt_queue_tail;
2167//{ added for rtl819x
2168#define IEEE80211_QUEUE_LIMIT 128
2169	u8 AsocRetryCount;
2170	unsigned int hw_header;
2171	struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
2172	struct sk_buff_head  skb_aggQ[MAX_QUEUE_SIZE];
2173	struct sk_buff_head  skb_drv_aggQ[MAX_QUEUE_SIZE];
2174	u32	sta_edca_param[4];
2175	bool aggregation;
2176	// Enable/Disable Rx immediate BA capability.
2177	bool enable_rx_imm_BA;
2178	bool bibsscoordinator;
2179
2180	//+by amy for DM ,080515
2181	//Dynamic Tx power for near/far range enable/Disable  , by amy , 2008-05-15
2182	bool	bdynamic_txpower_enable;
2183
2184	bool bCTSToSelfEnable;
2185	u8 	CTSToSelfTH;
2186
2187	u32 	fsync_time_interval;
2188	u32	fsync_rate_bitmap;
2189	u8	fsync_rssi_threshold;
2190	bool	bfsync_enable;
2191
2192	u8	fsync_multiple_timeinterval;		// FsyncMultipleTimeInterval * FsyncTimeInterval
2193	u32	fsync_firstdiff_ratethreshold;		// low threshold
2194	u32	fsync_seconddiff_ratethreshold;	 // decrease threshold
2195	Fsync_State			fsync_state;
2196	bool		bis_any_nonbepkts;
2197	//20Mhz 40Mhz AutoSwitch Threshold
2198	bandwidth_autoswitch bandwidth_auto_switch;
2199	//for txpower tracking
2200	bool FwRWRF;
2201
2202	//added by amy for AP roaming
2203	RT_LINK_DETECT_T	LinkDetectInfo;
2204        //added by amy for ps
2205	RT_POWER_SAVE_CONTROL	PowerSaveControl;
2206//}
2207	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
2208	struct  tx_pending_t tx_pending;
2209
2210	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
2211	struct timer_list associate_timer;
2212
2213	/* used if IEEE_SOFTMAC_BEACONS is set */
2214	struct timer_list beacon_timer;
2215        struct work_struct associate_complete_wq;
2216        struct work_struct associate_procedure_wq;
2217        struct delayed_work softmac_scan_wq;
2218        struct delayed_work associate_retry_wq;
2219	 struct delayed_work start_ibss_wq;
2220	 struct delayed_work hw_wakeup_wq;
2221	struct delayed_work hw_sleep_wq;
2222
2223        struct work_struct wx_sync_scan_wq;
2224        struct workqueue_struct *wq;
2225        // Qos related. Added by Annie, 2005-11-01.
2226        //STA_QOS  StaQos;
2227
2228        //u32 STA_EDCA_PARAM[4];
2229	//CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2230
2231
2232	/* Callback functions */
2233	void (*set_security)(struct net_device *dev,
2234			     struct ieee80211_security *sec);
2235
2236	/* Used to TX data frame by using txb structs.
2237	 * this is not used if in the softmac_features
2238	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2239	 */
2240	int (*hard_start_xmit)(struct ieee80211_txb *txb,
2241			       struct net_device *dev);
2242
2243	int (*reset_port)(struct net_device *dev);
2244        int (*is_queue_full) (struct net_device * dev, int pri);
2245
2246        int (*handle_management) (struct net_device * dev,
2247                                  struct ieee80211_network * network, u16 type);
2248        int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
2249
2250	/* Softmac-generated frames (mamagement) are TXed via this
2251	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2252	 * not set. As some cards may have different HW queues that
2253	 * one might want to use for data and management frames
2254	 * the option to have two callbacks might be useful.
2255	 * This fucntion can't sleep.
2256	 */
2257	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
2258			       struct net_device *dev);
2259
2260	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2261	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2262	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2263	 * then also management frames are sent via this callback.
2264	 * This function can't sleep.
2265	 */
2266	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
2267			       struct net_device *dev,int rate);
2268
2269	/* stops the HW queue for DATA frames. Useful to avoid
2270	 * waste time to TX data frame when we are reassociating
2271	 * This function can sleep.
2272	 */
2273	void (*data_hard_stop)(struct net_device *dev);
2274
2275	/* OK this is complementar to data_poll_hard_stop */
2276	void (*data_hard_resume)(struct net_device *dev);
2277
2278	/* ask to the driver to retune the radio .
2279	 * This function can sleep. the driver should ensure
2280	 * the radio has been swithced before return.
2281	 */
2282	void (*set_chan)(struct net_device *dev,short ch);
2283
2284	/* These are not used if the ieee stack takes care of
2285	 * scanning (IEEE_SOFTMAC_SCAN feature set).
2286	 * In this case only the set_chan is used.
2287	 *
2288	 * The syncro version is similar to the start_scan but
2289	 * does not return until all channels has been scanned.
2290	 * this is called in user context and should sleep,
2291	 * it is called in a work_queue when swithcing to ad-hoc mode
2292	 * or in behalf of iwlist scan when the card is associated
2293	 * and root user ask for a scan.
2294	 * the fucntion stop_scan should stop both the syncro and
2295	 * background scanning and can sleep.
2296	 * The fucntion start_scan should initiate the background
2297	 * scanning and can't sleep.
2298	 */
2299	void (*scan_syncro)(struct net_device *dev);
2300	void (*start_scan)(struct net_device *dev);
2301	void (*stop_scan)(struct net_device *dev);
2302
2303	/* indicate the driver that the link state is changed
2304	 * for example it may indicate the card is associated now.
2305	 * Driver might be interested in this to apply RX filter
2306	 * rules or simply light the LINK led
2307	 */
2308	void (*link_change)(struct net_device *dev);
2309
2310	/* these two function indicates to the HW when to start
2311	 * and stop to send beacons. This is used when the
2312	 * IEEE_SOFTMAC_BEACONS is not set. For now the
2313	 * stop_send_bacons is NOT guaranteed to be called only
2314	 * after start_send_beacons.
2315	 */
2316	void (*start_send_beacons) (struct net_device *dev);
2317	void (*stop_send_beacons) (struct net_device *dev);
2318
2319	/* power save mode related */
2320	void (*sta_wake_up) (struct net_device *dev);
2321//	void (*ps_request_tx_ack) (struct net_device *dev);
2322	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
2323	short (*ps_is_queue_empty) (struct net_device *dev);
2324        int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
2325        int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
2326
2327
2328	/* check whether Tx hw resouce available */
2329	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
2330	//added by wb for HT related
2331//	void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2332	void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
2333//	void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2334	bool (*GetNmodeSupportBySecCfg)(struct net_device* dev);
2335	void (*SetWirelessMode)(struct net_device* dev, u8 wireless_mode);
2336	bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device* dev);
2337	void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
2338
2339	/* This must be the last item so that it points to the data
2340	 * allocated beyond this structure by alloc_ieee80211 */
2341	u8 priv[0];
2342};
2343
2344#define	RT_RF_OFF_LEVL_ASPM			BIT0	// PCI ASPM
2345#define	RT_RF_OFF_LEVL_CLK_REQ		BIT1	// PCI clock request
2346#define	RT_RF_OFF_LEVL_PCI_D3			BIT2	// PCI D3 mode
2347#define	RT_RF_OFF_LEVL_HALT_NIC		BIT3	// NIC halt, re-initialize hw parameters
2348#define	RT_RF_OFF_LEVL_FREE_FW		BIT4	// FW free, re-download the FW
2349#define	RT_RF_OFF_LEVL_FW_32K		BIT5	// FW in 32k
2350#define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT6	// Always enable ASPM and Clock Req in initialization.
2351#define	RT_RF_LPS_DISALBE_2R			BIT30	// When LPS is on, disable 2R if no packet is received or transmittd.
2352#define	RT_RF_LPS_LEVEL_ASPM			BIT31	// LPS with ASPM
2353#define	RT_IN_PS_LEVEL(pPSC, _PS_FLAG)	((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
2354#define	RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel &= (~(_PS_FLAG)))
2355#define	RT_SET_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel |= _PS_FLAG)
2356
2357#define IEEE_A            (1<<0)
2358#define IEEE_B            (1<<1)
2359#define IEEE_G            (1<<2)
2360#define IEEE_N_24G 		  (1<<4)
2361#define	IEEE_N_5G		  (1<<5)
2362#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
2363
2364/* Generate a 802.11 header */
2365
2366/* Uses the channel change callback directly
2367 * instead of [start/stop] scan callbacks
2368 */
2369#define IEEE_SOFTMAC_SCAN (1<<2)
2370
2371/* Perform authentication and association handshake */
2372#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2373
2374/* Generate probe requests */
2375#define IEEE_SOFTMAC_PROBERQ (1<<4)
2376
2377/* Generate respones to probe requests */
2378#define IEEE_SOFTMAC_PROBERS (1<<5)
2379
2380/* The ieee802.11 stack will manages the netif queue
2381 * wake/stop for the driver, taking care of 802.11
2382 * fragmentation. See softmac.c for details. */
2383#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2384
2385/* Uses only the softmac_data_hard_start_xmit
2386 * even for TX management frames.
2387 */
2388#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2389
2390/* Generate beacons.  The stack will enqueue beacons
2391 * to the card
2392 */
2393#define IEEE_SOFTMAC_BEACONS (1<<6)
2394
2395static inline void *ieee80211_priv(struct net_device *dev)
2396{
2397	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
2398}
2399
2400extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
2401{
2402	/* Single white space is for Linksys APs */
2403	if (essid_len == 1 && essid[0] == ' ')
2404		return 1;
2405
2406	/* Otherwise, if the entire essid is 0, we assume it is hidden */
2407	while (essid_len) {
2408		essid_len--;
2409		if (essid[essid_len] != '\0')
2410			return 0;
2411	}
2412
2413	return 1;
2414}
2415
2416extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
2417{
2418	/*
2419	 * It is possible for both access points and our device to support
2420	 * combinations of modes, so as long as there is one valid combination
2421	 * of ap/device supported modes, then return success
2422	 *
2423	 */
2424	if ((mode & IEEE_A) &&
2425	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2426	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
2427		return 1;
2428
2429	if ((mode & IEEE_G) &&
2430	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2431	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
2432		return 1;
2433
2434	if ((mode & IEEE_B) &&
2435	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
2436	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
2437		return 1;
2438
2439	return 0;
2440}
2441
2442extern inline int ieee80211_get_hdrlen(u16 fc)
2443{
2444	int hdrlen = IEEE80211_3ADDR_LEN;
2445
2446	switch (WLAN_FC_GET_TYPE(fc)) {
2447	case IEEE80211_FTYPE_DATA:
2448		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
2449			hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
2450		if(IEEE80211_QOS_HAS_SEQ(fc))
2451			hdrlen += 2; /* QOS ctrl*/
2452		break;
2453	case IEEE80211_FTYPE_CTL:
2454		switch (WLAN_FC_GET_STYPE(fc)) {
2455		case IEEE80211_STYPE_CTS:
2456		case IEEE80211_STYPE_ACK:
2457			hdrlen = IEEE80211_1ADDR_LEN;
2458			break;
2459		default:
2460			hdrlen = IEEE80211_2ADDR_LEN;
2461			break;
2462		}
2463		break;
2464	}
2465
2466	return hdrlen;
2467}
2468
2469static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
2470{
2471        switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
2472        case IEEE80211_1ADDR_LEN:
2473                return ((struct ieee80211_hdr_1addr *)hdr)->payload;
2474        case IEEE80211_2ADDR_LEN:
2475                return ((struct ieee80211_hdr_2addr *)hdr)->payload;
2476        case IEEE80211_3ADDR_LEN:
2477                return ((struct ieee80211_hdr_3addr *)hdr)->payload;
2478        case IEEE80211_4ADDR_LEN:
2479                return ((struct ieee80211_hdr_4addr *)hdr)->payload;
2480        }
2481        return NULL;
2482}
2483
2484static inline int ieee80211_is_ofdm_rate(u8 rate)
2485{
2486        switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2487        case IEEE80211_OFDM_RATE_6MB:
2488        case IEEE80211_OFDM_RATE_9MB:
2489        case IEEE80211_OFDM_RATE_12MB:
2490        case IEEE80211_OFDM_RATE_18MB:
2491        case IEEE80211_OFDM_RATE_24MB:
2492        case IEEE80211_OFDM_RATE_36MB:
2493        case IEEE80211_OFDM_RATE_48MB:
2494        case IEEE80211_OFDM_RATE_54MB:
2495                return 1;
2496        }
2497        return 0;
2498}
2499
2500static inline int ieee80211_is_cck_rate(u8 rate)
2501{
2502        switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2503        case IEEE80211_CCK_RATE_1MB:
2504        case IEEE80211_CCK_RATE_2MB:
2505        case IEEE80211_CCK_RATE_5MB:
2506        case IEEE80211_CCK_RATE_11MB:
2507                return 1;
2508        }
2509        return 0;
2510}
2511
2512
2513/* ieee80211.c */
2514extern void free_ieee80211(struct net_device *dev);
2515extern struct net_device *alloc_ieee80211(int sizeof_priv);
2516
2517extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
2518
2519/* ieee80211_tx.c */
2520
2521extern int ieee80211_encrypt_fragment(
2522	struct ieee80211_device *ieee,
2523	struct sk_buff *frag,
2524	int hdr_len);
2525
2526extern int ieee80211_rtl_xmit(struct sk_buff *skb,
2527			  struct net_device *dev);
2528extern void ieee80211_txb_free(struct ieee80211_txb *);
2529
2530
2531/* ieee80211_rx.c */
2532extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
2533			struct ieee80211_rx_stats *rx_stats);
2534extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
2535			     struct ieee80211_hdr_4addr *header,
2536			     struct ieee80211_rx_stats *stats);
2537
2538/* ieee80211_wx.c */
2539extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
2540				 struct iw_request_info *info,
2541				 union iwreq_data *wrqu, char *key);
2542extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
2543				   struct iw_request_info *info,
2544				   union iwreq_data *wrqu, char *key);
2545extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
2546				   struct iw_request_info *info,
2547				   union iwreq_data *wrqu, char *key);
2548#if WIRELESS_EXT >= 18
2549extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
2550                            struct iw_request_info *info,
2551                            union iwreq_data* wrqu, char *extra);
2552extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
2553                            struct iw_request_info *info,
2554                            union iwreq_data* wrqu, char *extra);
2555extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
2556                               struct iw_request_info *info,
2557                               struct iw_param *data, char *extra);
2558extern int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
2559                               struct iw_request_info *info,
2560                               union iwreq_data *wrqu, char *extra);
2561#endif
2562extern int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
2563
2564/* ieee80211_softmac.c */
2565extern short ieee80211_is_54g(struct ieee80211_network net);
2566extern short ieee80211_is_shortslot(struct ieee80211_network net);
2567extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
2568			struct ieee80211_rx_stats *rx_stats, u16 type,
2569			u16 stype);
2570extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net);
2571
2572void SendDisassociation(struct ieee80211_device *ieee, u8* asSta, u8 asRsn);
2573extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee);
2574
2575extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2576extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
2577extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
2578extern void ieee80211_start_bss(struct ieee80211_device *ieee);
2579extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
2580extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
2581extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
2582extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
2583extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
2584extern void ieee80211_disassociate(struct ieee80211_device *ieee);
2585extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
2586extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
2587extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
2588extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
2589extern void ieee80211_stop_protocol(struct ieee80211_device *ieee,u8 shutdown);
2590extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
2591extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee,u8 shutdown);
2592extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
2593extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee);
2594extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee);
2595extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
2596extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
2597extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2598extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p);
2599extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
2600extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
2601
2602extern void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
2603
2604/* ieee80211_crypt_ccmp&tkip&wep.c */
2605extern void ieee80211_tkip_null(void);
2606extern void ieee80211_wep_null(void);
2607extern void ieee80211_ccmp_null(void);
2608
2609/* ieee80211_softmac_wx.c */
2610
2611extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
2612			    struct iw_request_info *info,
2613			    union iwreq_data *wrqu, char *ext);
2614
2615extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
2616			 struct iw_request_info *info,
2617			 union iwreq_data *awrq,
2618			 char *extra);
2619
2620extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b);
2621
2622extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
2623			     struct iw_request_info *info,
2624			     union iwreq_data *wrqu, char *extra);
2625
2626extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
2627			     struct iw_request_info *info,
2628			     union iwreq_data *wrqu, char *extra);
2629
2630extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
2631			     union iwreq_data *wrqu, char *b);
2632
2633extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
2634			     union iwreq_data *wrqu, char *b);
2635
2636extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
2637			      struct iw_request_info *a,
2638			      union iwreq_data *wrqu, char *extra);
2639
2640extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
2641			     union iwreq_data *wrqu, char *b);
2642
2643extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
2644			     union iwreq_data *wrqu, char *b);
2645
2646extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
2647			     union iwreq_data *wrqu, char *b);
2648
2649//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2650extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
2651
2652
2653extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
2654			       struct iw_request_info *info,
2655			       union iwreq_data *wrqu, char *extra);
2656
2657extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
2658			     struct iw_request_info *info,
2659			     union iwreq_data *wrqu, char *extra);
2660
2661extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
2662				 struct iw_request_info *info,
2663				 union iwreq_data *wrqu, char *extra);
2664
2665extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
2666				 struct iw_request_info *info,
2667				 union iwreq_data *wrqu, char *extra);
2668
2669extern int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
2670			     struct iw_request_info *info,
2671			     union iwreq_data *wrqu, char *extra);
2672
2673extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
2674			     struct iw_request_info *info,
2675			     union iwreq_data *wrqu, char *extra);
2676//HT
2677#define MAX_RECEIVE_BUFFER_SIZE 9100  //
2678extern void HTDebugHTCapability(u8* CapIE, u8* TitleString );
2679extern void HTDebugHTInfo(u8*  InfoIE, u8* TitleString);
2680
2681void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET    Offset);
2682extern void HTUpdateDefaultSetting(struct ieee80211_device* ieee);
2683extern void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 isEncrypt);
2684extern void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 isEncrypt);
2685extern void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len);
2686extern void HTOnAssocRsp(struct ieee80211_device *ieee);
2687extern void HTInitializeHTInfo(struct ieee80211_device* ieee);
2688extern void HTInitializeBssDesc(PBSS_HT pBssHT);
2689extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
2690extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee,   struct ieee80211_network * pNetwork);
2691extern u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter);
2692extern u8 MCS_FILTER_ALL[];
2693extern u16 MCS_DATA_RATE[2][2][77] ;
2694extern u8 HTCCheck(struct ieee80211_device* ieee, u8*   pFrame);
2695//extern void HTSetConnectBwModeCallback(unsigned long data);
2696extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT  pHTInfo);
2697extern bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee);
2698extern u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee,  u8      nMcsRate);
2699extern u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate);
2700extern u16  TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate);
2701//function in BAPROC.c
2702extern int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb);
2703extern int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb);
2704extern int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb);
2705extern void TsInitAddBA( struct ieee80211_device* ieee, PTX_TS_RECORD   pTS, u8 Policy, u8 bOverwritePending);
2706extern void TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
2707extern void BaSetupTimeOut(unsigned long data);
2708extern void TxBaInactTimeout(unsigned long data);
2709extern void RxBaInactTimeout(unsigned long data);
2710extern void ResetBaEntry( PBA_RECORD pBA);
2711//function in TS.c
2712extern bool GetTs(
2713        struct ieee80211_device*        ieee,
2714        PTS_COMMON_INFO                 *ppTS,
2715        u8*                             Addr,
2716        u8                              TID,
2717        TR_SELECT                       TxRxSelect,  //Rx:1, Tx:0
2718        bool                            bAddNewTs
2719        );
2720extern void TSInitialize(struct ieee80211_device *ieee);
2721extern  void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD   pTxTS);
2722extern void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr);
2723extern void RemoveAllTS(struct ieee80211_device* ieee);
2724void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
2725
2726extern const long ieee80211_wlan_frequencies[];
2727
2728extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
2729{
2730	ieee->scans++;
2731}
2732
2733extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
2734{
2735	return ieee->scans;
2736}
2737
2738static inline const char *escape_essid(const char *essid, u8 essid_len) {
2739	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
2740	const char *s = essid;
2741	char *d = escaped;
2742
2743	if (ieee80211_is_empty_essid(essid, essid_len)) {
2744		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
2745		return escaped;
2746	}
2747
2748	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
2749	while (essid_len--) {
2750		if (*s == '\0') {
2751			*d++ = '\\';
2752			*d++ = '0';
2753			s++;
2754		} else {
2755			*d++ = *s++;
2756		}
2757	}
2758	*d = '\0';
2759	return escaped;
2760}
2761
2762/* For the function is more related to hardware setting, it's better to use the
2763 * ieee handler to refer to it.
2764 */
2765extern short check_nic_enough_desc(struct net_device *dev, int queue_index);
2766extern int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
2767extern int ieee80211_parse_info_param(struct ieee80211_device *ieee,
2768		struct ieee80211_info_element *info_element,
2769		u16 length,
2770		struct ieee80211_network *network,
2771		struct ieee80211_rx_stats *stats);
2772
2773void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8  index);
2774void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr);
2775void ieee80211_sta_ps_send_pspoll_frame(struct ieee80211_device *ieee);
2776#define RT_ASOC_RETRY_LIMIT	5
2777#endif /* IEEE80211_H */
2778