• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/drivers/net/wireless/wl12xx/
1/*
2 * This file is part of wl1271
3 *
4 * Copyright (C) 2008-2009 Nokia Corporation
5 *
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 */
23
24#include "wl1271.h"
25#include "wl1271_reg.h"
26#include "wl1271_io.h"
27#include "wl1271_event.h"
28#include "wl1271_ps.h"
29#include "wl1271_scan.h"
30#include "wl12xx_80211.h"
31
32void wl1271_pspoll_work(struct work_struct *work)
33{
34	struct delayed_work *dwork;
35	struct wl1271 *wl;
36
37	dwork = container_of(work, struct delayed_work, work);
38	wl = container_of(dwork, struct wl1271, pspoll_work);
39
40	wl1271_debug(DEBUG_EVENT, "pspoll work");
41
42	mutex_lock(&wl->mutex);
43
44	if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags))
45		goto out;
46
47	if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
48		goto out;
49
50	/*
51	 * if we end up here, then we were in powersave when the pspoll
52	 * delivery failure occurred, and no-one changed state since, so
53	 * we should go back to powersave.
54	 */
55	wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, true);
56
57out:
58	mutex_unlock(&wl->mutex);
59};
60
61static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl)
62{
63	int delay = wl->conf.conn.ps_poll_recovery_period;
64	int ret;
65
66	wl->ps_poll_failures++;
67	if (wl->ps_poll_failures == 1)
68		wl1271_info("AP with dysfunctional ps-poll, "
69			    "trying to work around it.");
70
71	/* force active mode receive data from the AP */
72	if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
73		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, true);
74		if (ret < 0)
75			return;
76		set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags);
77		ieee80211_queue_delayed_work(wl->hw, &wl->pspoll_work,
78					     msecs_to_jiffies(delay));
79	}
80
81	/*
82	 * If already in active mode, lets we should be getting data from
83	 * the AP right away. If we enter PSM too fast after this, and data
84	 * remains on the AP, we will get another event like this, and we'll
85	 * go into active once more.
86	 */
87}
88
89static int wl1271_event_ps_report(struct wl1271 *wl,
90				  struct event_mailbox *mbox,
91				  bool *beacon_loss)
92{
93	int ret = 0;
94
95	wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status);
96
97	switch (mbox->ps_status) {
98	case EVENT_ENTER_POWER_SAVE_FAIL:
99		wl1271_debug(DEBUG_PSM, "PSM entry failed");
100
101		if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
102			/* remain in active mode */
103			wl->psm_entry_retry = 0;
104			break;
105		}
106
107		if (wl->psm_entry_retry < wl->conf.conn.psm_entry_retries) {
108			wl->psm_entry_retry++;
109			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
110						 true);
111		} else {
112			wl1271_info("No ack to nullfunc from AP.");
113			wl->psm_entry_retry = 0;
114			*beacon_loss = true;
115		}
116		break;
117	case EVENT_ENTER_POWER_SAVE_SUCCESS:
118		wl->psm_entry_retry = 0;
119
120		/* enable beacon filtering */
121		ret = wl1271_acx_beacon_filter_opt(wl, true);
122		if (ret < 0)
123			break;
124
125		/* enable beacon early termination */
126		ret = wl1271_acx_bet_enable(wl, true);
127		if (ret < 0)
128			break;
129
130		/* go to extremely low power mode */
131		wl1271_ps_elp_sleep(wl);
132		if (ret < 0)
133			break;
134		break;
135	case EVENT_EXIT_POWER_SAVE_FAIL:
136		wl1271_debug(DEBUG_PSM, "PSM exit failed");
137
138		if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
139			wl->psm_entry_retry = 0;
140			break;
141		}
142
143		/* make sure the firmware goes to active mode - the frame to
144		   be sent next will indicate to the AP, that we are active. */
145		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
146					 false);
147		break;
148	case EVENT_EXIT_POWER_SAVE_SUCCESS:
149	default:
150		break;
151	}
152
153	return ret;
154}
155
156static void wl1271_event_rssi_trigger(struct wl1271 *wl,
157				      struct event_mailbox *mbox)
158{
159	enum nl80211_cqm_rssi_threshold_event event;
160	s8 metric = mbox->rssi_snr_trigger_metric[0];
161
162	wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric);
163
164	if (metric <= wl->rssi_thold)
165		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
166	else
167		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
168
169	if (event != wl->last_rssi_event)
170		ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL);
171	wl->last_rssi_event = event;
172}
173
174static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
175{
176	wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
177	wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
178	wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
179}
180
181static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
182{
183	int ret;
184	u32 vector;
185	bool beacon_loss = false;
186
187	wl1271_event_mbox_dump(mbox);
188
189	vector = le32_to_cpu(mbox->events_vector);
190	vector &= ~(le32_to_cpu(mbox->events_mask));
191	wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
192
193	if (vector & SCAN_COMPLETE_EVENT_ID) {
194		wl1271_debug(DEBUG_EVENT, "status: 0x%x",
195			     mbox->scheduled_scan_status);
196
197		wl1271_scan_stm(wl);
198	}
199
200	/* disable dynamic PS when requested by the firmware */
201	if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
202	    wl->bss_type == BSS_TYPE_STA_BSS) {
203		if (mbox->soft_gemini_sense_info)
204			ieee80211_disable_dyn_ps(wl->vif);
205		else
206			ieee80211_enable_dyn_ps(wl->vif);
207	}
208
209	/*
210	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
211	 * filtering) is enabled. Without PSM, the stack will receive all
212	 * beacons and can detect beacon loss by itself.
213	 *
214	 * As there's possibility that the driver disables PSM before receiving
215	 * BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
216	 *
217	 */
218	if (vector & BSS_LOSE_EVENT_ID) {
219		wl1271_info("Beacon loss detected.");
220
221		/* indicate to the stack, that beacons have been lost */
222		beacon_loss = true;
223	}
224
225	if (vector & PS_REPORT_EVENT_ID) {
226		wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
227		ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
228		if (ret < 0)
229			return ret;
230	}
231
232	if (vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID)
233		wl1271_event_pspoll_delivery_fail(wl);
234
235	if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
236		wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
237		if (wl->vif)
238			wl1271_event_rssi_trigger(wl, mbox);
239	}
240
241	if (wl->vif && beacon_loss)
242		ieee80211_connection_loss(wl->vif);
243
244	return 0;
245}
246
247int wl1271_event_unmask(struct wl1271 *wl)
248{
249	int ret;
250
251	ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask));
252	if (ret < 0)
253		return ret;
254
255	return 0;
256}
257
258void wl1271_event_mbox_config(struct wl1271 *wl)
259{
260	wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
261	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
262
263	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
264		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
265}
266
267int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
268{
269	struct event_mailbox mbox;
270	int ret;
271
272	wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
273
274	if (mbox_num > 1)
275		return -EINVAL;
276
277	/* first we read the mbox descriptor */
278	wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox,
279		    sizeof(struct event_mailbox), false);
280
281	/* process the descriptor */
282	ret = wl1271_event_process(wl, &mbox);
283	if (ret < 0)
284		return ret;
285
286	/* then we let the firmware know it can go on...*/
287	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
288
289	return 0;
290}
291