1/* 2 * pata_sch.c - Intel SCH PATA controllers 3 * 4 * Copyright (c) 2008 Alek Du <alek.du@intel.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License 2 as published 8 * by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; see the file COPYING. If not, write to 17 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 18 * 19 */ 20 21/* 22 * Supports: 23 * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at: 24 * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf 25 */ 26 27#include <linux/kernel.h> 28#include <linux/module.h> 29#include <linux/pci.h> 30#include <linux/init.h> 31#include <linux/blkdev.h> 32#include <linux/delay.h> 33#include <linux/device.h> 34#include <scsi/scsi_host.h> 35#include <linux/libata.h> 36#include <linux/dmi.h> 37 38#define DRV_NAME "pata_sch" 39#define DRV_VERSION "0.2" 40 41/* see SCH datasheet page 351 */ 42enum { 43 D0TIM = 0x80, /* Device 0 Timing Register */ 44 D1TIM = 0x84, /* Device 1 Timing Register */ 45 PM = 0x07, /* PIO Mode Bit Mask */ 46 MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */ 47 UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */ 48 PPE = (1 << 30), /* Prefetch/Post Enable */ 49 USD = (1 << 31), /* Use Synchronous DMA */ 50}; 51 52static int sch_init_one(struct pci_dev *pdev, 53 const struct pci_device_id *ent); 54static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev); 55static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev); 56 57static const struct pci_device_id sch_pci_tbl[] = { 58 /* Intel SCH PATA Controller */ 59 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 }, 60 { } /* terminate list */ 61}; 62 63static struct pci_driver sch_pci_driver = { 64 .name = DRV_NAME, 65 .id_table = sch_pci_tbl, 66 .probe = sch_init_one, 67 .remove = ata_pci_remove_one, 68#ifdef CONFIG_PM 69 .suspend = ata_pci_device_suspend, 70 .resume = ata_pci_device_resume, 71#endif 72}; 73 74static struct scsi_host_template sch_sht = { 75 ATA_BMDMA_SHT(DRV_NAME), 76}; 77 78static struct ata_port_operations sch_pata_ops = { 79 .inherits = &ata_bmdma_port_ops, 80 .cable_detect = ata_cable_unknown, 81 .set_piomode = sch_set_piomode, 82 .set_dmamode = sch_set_dmamode, 83}; 84 85static struct ata_port_info sch_port_info = { 86 .flags = ATA_FLAG_SLAVE_POSS, 87 .pio_mask = ATA_PIO4, 88 .mwdma_mask = ATA_MWDMA2, 89 .udma_mask = ATA_UDMA5, 90 .port_ops = &sch_pata_ops, 91}; 92 93MODULE_AUTHOR("Alek Du <alek.du@intel.com>"); 94MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers"); 95MODULE_LICENSE("GPL"); 96MODULE_DEVICE_TABLE(pci, sch_pci_tbl); 97MODULE_VERSION(DRV_VERSION); 98 99/** 100 * sch_set_piomode - Initialize host controller PATA PIO timings 101 * @ap: Port whose timings we are configuring 102 * @adev: ATA device 103 * 104 * Set PIO mode for device, in host controller PCI config space. 105 * 106 * LOCKING: 107 * None (inherited from caller). 108 */ 109 110static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev) 111{ 112 unsigned int pio = adev->pio_mode - XFER_PIO_0; 113 struct pci_dev *dev = to_pci_dev(ap->host->dev); 114 unsigned int port = adev->devno ? D1TIM : D0TIM; 115 unsigned int data; 116 117 pci_read_config_dword(dev, port, &data); 118 /* see SCH datasheet page 351 */ 119 /* set PIO mode */ 120 data &= ~(PM | PPE); 121 data |= pio; 122 /* enable PPE for block device */ 123 if (adev->class == ATA_DEV_ATA) 124 data |= PPE; 125 pci_write_config_dword(dev, port, data); 126} 127 128/** 129 * sch_set_dmamode - Initialize host controller PATA DMA timings 130 * @ap: Port whose timings we are configuring 131 * @adev: ATA device 132 * 133 * Set MW/UDMA mode for device, in host controller PCI config space. 134 * 135 * LOCKING: 136 * None (inherited from caller). 137 */ 138 139static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev) 140{ 141 unsigned int dma_mode = adev->dma_mode; 142 struct pci_dev *dev = to_pci_dev(ap->host->dev); 143 unsigned int port = adev->devno ? D1TIM : D0TIM; 144 unsigned int data; 145 146 pci_read_config_dword(dev, port, &data); 147 /* see SCH datasheet page 351 */ 148 if (dma_mode >= XFER_UDMA_0) { 149 /* enable Synchronous DMA mode */ 150 data |= USD; 151 data &= ~UDM; 152 data |= (dma_mode - XFER_UDMA_0) << 16; 153 } else { /* must be MWDMA mode, since we masked SWDMA already */ 154 data &= ~(USD | MDM); 155 data |= (dma_mode - XFER_MW_DMA_0) << 8; 156 } 157 pci_write_config_dword(dev, port, data); 158} 159 160/** 161 * sch_init_one - Register SCH ATA PCI device with kernel services 162 * @pdev: PCI device to register 163 * @ent: Entry in sch_pci_tbl matching with @pdev 164 * 165 * LOCKING: 166 * Inherited from PCI layer (may sleep). 167 * 168 * RETURNS: 169 * Zero on success, or -ERRNO value. 170 */ 171 172static int __devinit sch_init_one(struct pci_dev *pdev, 173 const struct pci_device_id *ent) 174{ 175 static int printed_version; 176 const struct ata_port_info *ppi[] = { &sch_port_info, NULL }; 177 178 if (!printed_version++) 179 dev_printk(KERN_DEBUG, &pdev->dev, 180 "version " DRV_VERSION "\n"); 181 182 return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0); 183} 184 185static int __init sch_init(void) 186{ 187 return pci_register_driver(&sch_pci_driver); 188} 189 190static void __exit sch_exit(void) 191{ 192 pci_unregister_driver(&sch_pci_driver); 193} 194 195module_init(sch_init); 196module_exit(sch_exit); 197