• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/drivers/acpi/
1#include <linux/proc_fs.h>
2#include <linux/seq_file.h>
3#include <linux/suspend.h>
4#include <linux/bcd.h>
5#include <asm/uaccess.h>
6
7#include <acpi/acpi_bus.h>
8#include <acpi/acpi_drivers.h>
9
10#ifdef CONFIG_X86
11#include <linux/mc146818rtc.h>
12#endif
13
14#include "sleep.h"
15
16#define _COMPONENT		ACPI_SYSTEM_COMPONENT
17
18/*
19 * this file provides support for:
20 * /proc/acpi/alarm
21 * /proc/acpi/wakeup
22 */
23
24ACPI_MODULE_NAME("sleep")
25
26#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
27	!defined(CONFIG_X86)
28/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
29#else
30#define	HAVE_ACPI_LEGACY_ALARM
31#endif
32
33#ifdef	HAVE_ACPI_LEGACY_ALARM
34
35static u32 cmos_bcd_read(int offset, int rtc_control);
36
37static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset)
38{
39	u32 sec, min, hr;
40	u32 day, mo, yr, cent = 0;
41	u32 today = 0;
42	unsigned char rtc_control = 0;
43	unsigned long flags;
44
45	spin_lock_irqsave(&rtc_lock, flags);
46
47	rtc_control = CMOS_READ(RTC_CONTROL);
48	sec = cmos_bcd_read(RTC_SECONDS_ALARM, rtc_control);
49	min = cmos_bcd_read(RTC_MINUTES_ALARM, rtc_control);
50	hr = cmos_bcd_read(RTC_HOURS_ALARM, rtc_control);
51
52	/* If we ever get an FACP with proper values... */
53	if (acpi_gbl_FADT.day_alarm) {
54		/* ACPI spec: only low 6 its should be cared */
55		day = CMOS_READ(acpi_gbl_FADT.day_alarm) & 0x3F;
56		if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
57			day = bcd2bin(day);
58	} else
59		day = cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
60	if (acpi_gbl_FADT.month_alarm)
61		mo = cmos_bcd_read(acpi_gbl_FADT.month_alarm, rtc_control);
62	else {
63		mo = cmos_bcd_read(RTC_MONTH, rtc_control);
64		today = cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
65	}
66	if (acpi_gbl_FADT.century)
67		cent = cmos_bcd_read(acpi_gbl_FADT.century, rtc_control);
68
69	yr = cmos_bcd_read(RTC_YEAR, rtc_control);
70
71	spin_unlock_irqrestore(&rtc_lock, flags);
72
73	/* we're trusting the FADT (see above) */
74	if (!acpi_gbl_FADT.century)
75		/* If we're not trusting the FADT, we should at least make it
76		 * right for _this_ century... ehm, what is _this_ century?
77		 *
78		 * TBD:
79		 *  ASAP: find piece of code in the kernel, e.g. star tracker driver,
80		 *        which we can trust to determine the century correctly. Atom
81		 *        watch driver would be nice, too...
82		 *
83		 *  if that has not happened, change for first release in 2050:
84		 *        if (yr<50)
85		 *                yr += 2100;
86		 *        else
87		 *                yr += 2000;   // current line of code
88		 *
89		 *  if that has not happened either, please do on 2099/12/31:23:59:59
90		 *        s/2000/2100
91		 *
92		 */
93		yr += 2000;
94	else
95		yr += cent * 100;
96
97	/*
98	 * Show correct dates for alarms up to a month into the future.
99	 * This solves issues for nearly all situations with the common
100	 * 30-day alarm clocks in PC hardware.
101	 */
102	if (day < today) {
103		if (mo < 12) {
104			mo += 1;
105		} else {
106			mo = 1;
107			yr += 1;
108		}
109	}
110
111	seq_printf(seq, "%4.4u-", yr);
112	(mo > 12) ? seq_puts(seq, "**-") : seq_printf(seq, "%2.2u-", mo);
113	(day > 31) ? seq_puts(seq, "** ") : seq_printf(seq, "%2.2u ", day);
114	(hr > 23) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", hr);
115	(min > 59) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", min);
116	(sec > 59) ? seq_puts(seq, "**\n") : seq_printf(seq, "%2.2u\n", sec);
117
118	return 0;
119}
120
121static int acpi_system_alarm_open_fs(struct inode *inode, struct file *file)
122{
123	return single_open(file, acpi_system_alarm_seq_show, PDE(inode)->data);
124}
125
126static int get_date_field(char **p, u32 * value)
127{
128	char *next = NULL;
129	char *string_end = NULL;
130	int result = -EINVAL;
131
132	/*
133	 * Try to find delimeter, only to insert null.  The end of the
134	 * string won't have one, but is still valid.
135	 */
136	if (*p == NULL)
137		return result;
138
139	next = strpbrk(*p, "- :");
140	if (next)
141		*next++ = '\0';
142
143	*value = simple_strtoul(*p, &string_end, 10);
144
145	/* Signal success if we got a good digit */
146	if (string_end != *p)
147		result = 0;
148
149	if (next)
150		*p = next;
151	else
152		*p = NULL;
153
154	return result;
155}
156
157/* Read a possibly BCD register, always return binary */
158static u32 cmos_bcd_read(int offset, int rtc_control)
159{
160	u32 val = CMOS_READ(offset);
161	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
162		val = bcd2bin(val);
163	return val;
164}
165
166/* Write binary value into possibly BCD register */
167static void cmos_bcd_write(u32 val, int offset, int rtc_control)
168{
169	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
170		val = bin2bcd(val);
171	CMOS_WRITE(val, offset);
172}
173
174static ssize_t
175acpi_system_write_alarm(struct file *file,
176			const char __user * buffer, size_t count, loff_t * ppos)
177{
178	int result = 0;
179	char alarm_string[30] = { '\0' };
180	char *p = alarm_string;
181	u32 sec, min, hr, day, mo, yr;
182	int adjust = 0;
183	unsigned char rtc_control = 0;
184
185	if (count > sizeof(alarm_string) - 1)
186		return -EINVAL;
187
188	if (copy_from_user(alarm_string, buffer, count))
189		return -EFAULT;
190
191	alarm_string[count] = '\0';
192
193	/* check for time adjustment */
194	if (alarm_string[0] == '+') {
195		p++;
196		adjust = 1;
197	}
198
199	if ((result = get_date_field(&p, &yr)))
200		goto end;
201	if ((result = get_date_field(&p, &mo)))
202		goto end;
203	if ((result = get_date_field(&p, &day)))
204		goto end;
205	if ((result = get_date_field(&p, &hr)))
206		goto end;
207	if ((result = get_date_field(&p, &min)))
208		goto end;
209	if ((result = get_date_field(&p, &sec)))
210		goto end;
211
212	spin_lock_irq(&rtc_lock);
213
214	rtc_control = CMOS_READ(RTC_CONTROL);
215
216	if (adjust) {
217		yr += cmos_bcd_read(RTC_YEAR, rtc_control);
218		mo += cmos_bcd_read(RTC_MONTH, rtc_control);
219		day += cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
220		hr += cmos_bcd_read(RTC_HOURS, rtc_control);
221		min += cmos_bcd_read(RTC_MINUTES, rtc_control);
222		sec += cmos_bcd_read(RTC_SECONDS, rtc_control);
223	}
224
225	spin_unlock_irq(&rtc_lock);
226
227	if (sec > 59) {
228		min += sec/60;
229		sec = sec%60;
230	}
231	if (min > 59) {
232		hr += min/60;
233		min = min%60;
234	}
235	if (hr > 23) {
236		day += hr/24;
237		hr = hr%24;
238	}
239	if (day > 31) {
240		mo += day/32;
241		day = day%32;
242	}
243	if (mo > 12) {
244		yr += mo/13;
245		mo = mo%13;
246	}
247
248	spin_lock_irq(&rtc_lock);
249	/*
250	 * Disable alarm interrupt before setting alarm timer or else
251	 * when ACPI_EVENT_RTC is enabled, a spurious ACPI interrupt occurs
252	 */
253	rtc_control &= ~RTC_AIE;
254	CMOS_WRITE(rtc_control, RTC_CONTROL);
255	CMOS_READ(RTC_INTR_FLAGS);
256
257	/* write the fields the rtc knows about */
258	cmos_bcd_write(hr, RTC_HOURS_ALARM, rtc_control);
259	cmos_bcd_write(min, RTC_MINUTES_ALARM, rtc_control);
260	cmos_bcd_write(sec, RTC_SECONDS_ALARM, rtc_control);
261
262	/*
263	 * If the system supports an enhanced alarm it will have non-zero
264	 * offsets into the CMOS RAM here -- which for some reason are pointing
265	 * to the RTC area of memory.
266	 */
267	if (acpi_gbl_FADT.day_alarm)
268		cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control);
269	if (acpi_gbl_FADT.month_alarm)
270		cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control);
271	if (acpi_gbl_FADT.century) {
272		if (adjust)
273			yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100;
274		cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control);
275	}
276	/* enable the rtc alarm interrupt */
277	rtc_control |= RTC_AIE;
278	CMOS_WRITE(rtc_control, RTC_CONTROL);
279	CMOS_READ(RTC_INTR_FLAGS);
280
281	spin_unlock_irq(&rtc_lock);
282
283	acpi_clear_event(ACPI_EVENT_RTC);
284	acpi_enable_event(ACPI_EVENT_RTC, 0);
285
286	*ppos += count;
287
288	result = 0;
289      end:
290	return result ? result : count;
291}
292#endif				/* HAVE_ACPI_LEGACY_ALARM */
293
294static int
295acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
296{
297	struct list_head *node, *next;
298
299	seq_printf(seq, "Device\tS-state\t  Status   Sysfs node\n");
300
301	mutex_lock(&acpi_device_lock);
302	list_for_each_safe(node, next, &acpi_wakeup_device_list) {
303		struct acpi_device *dev =
304		    container_of(node, struct acpi_device, wakeup_list);
305		struct device *ldev;
306
307		if (!dev->wakeup.flags.valid)
308			continue;
309
310		ldev = acpi_get_physical_device(dev->handle);
311		seq_printf(seq, "%s\t  S%d\t%c%-8s  ",
312			   dev->pnp.bus_id,
313			   (u32) dev->wakeup.sleep_state,
314			   dev->wakeup.flags.run_wake ? '*' : ' ',
315			   dev->wakeup.state.enabled ? "enabled" : "disabled");
316		if (ldev)
317			seq_printf(seq, "%s:%s",
318				   ldev->bus ? ldev->bus->name : "no-bus",
319				   dev_name(ldev));
320		seq_printf(seq, "\n");
321		put_device(ldev);
322
323	}
324	mutex_unlock(&acpi_device_lock);
325	return 0;
326}
327
328static void physical_device_enable_wakeup(struct acpi_device *adev)
329{
330	struct device *dev = acpi_get_physical_device(adev->handle);
331
332	if (dev && device_can_wakeup(dev))
333		device_set_wakeup_enable(dev, adev->wakeup.state.enabled);
334}
335
336static ssize_t
337acpi_system_write_wakeup_device(struct file *file,
338				const char __user * buffer,
339				size_t count, loff_t * ppos)
340{
341	struct list_head *node, *next;
342	char strbuf[5];
343	char str[5] = "";
344	unsigned int len = count;
345	struct acpi_device *found_dev = NULL;
346
347	if (len > 4)
348		len = 4;
349	if (len < 0)
350		return -EFAULT;
351
352	if (copy_from_user(strbuf, buffer, len))
353		return -EFAULT;
354	strbuf[len] = '\0';
355	sscanf(strbuf, "%s", str);
356
357	mutex_lock(&acpi_device_lock);
358	list_for_each_safe(node, next, &acpi_wakeup_device_list) {
359		struct acpi_device *dev =
360		    container_of(node, struct acpi_device, wakeup_list);
361		if (!dev->wakeup.flags.valid)
362			continue;
363
364		if (!strncmp(dev->pnp.bus_id, str, 4)) {
365			dev->wakeup.state.enabled =
366			    dev->wakeup.state.enabled ? 0 : 1;
367			found_dev = dev;
368			break;
369		}
370	}
371	if (found_dev) {
372		physical_device_enable_wakeup(found_dev);
373		list_for_each_safe(node, next, &acpi_wakeup_device_list) {
374			struct acpi_device *dev = container_of(node,
375							       struct
376							       acpi_device,
377							       wakeup_list);
378
379			if ((dev != found_dev) &&
380			    (dev->wakeup.gpe_number ==
381			     found_dev->wakeup.gpe_number)
382			    && (dev->wakeup.gpe_device ==
383				found_dev->wakeup.gpe_device)) {
384				printk(KERN_WARNING
385				       "ACPI: '%s' and '%s' have the same GPE, "
386				       "can't disable/enable one separately\n",
387				       dev->pnp.bus_id, found_dev->pnp.bus_id);
388				dev->wakeup.state.enabled =
389				    found_dev->wakeup.state.enabled;
390				physical_device_enable_wakeup(dev);
391			}
392		}
393	}
394	mutex_unlock(&acpi_device_lock);
395	return count;
396}
397
398static int
399acpi_system_wakeup_device_open_fs(struct inode *inode, struct file *file)
400{
401	return single_open(file, acpi_system_wakeup_device_seq_show,
402			   PDE(inode)->data);
403}
404
405static const struct file_operations acpi_system_wakeup_device_fops = {
406	.owner = THIS_MODULE,
407	.open = acpi_system_wakeup_device_open_fs,
408	.read = seq_read,
409	.write = acpi_system_write_wakeup_device,
410	.llseek = seq_lseek,
411	.release = single_release,
412};
413
414#ifdef	HAVE_ACPI_LEGACY_ALARM
415static const struct file_operations acpi_system_alarm_fops = {
416	.owner = THIS_MODULE,
417	.open = acpi_system_alarm_open_fs,
418	.read = seq_read,
419	.write = acpi_system_write_alarm,
420	.llseek = seq_lseek,
421	.release = single_release,
422};
423
424static u32 rtc_handler(void *context)
425{
426	acpi_clear_event(ACPI_EVENT_RTC);
427	acpi_disable_event(ACPI_EVENT_RTC, 0);
428
429	return ACPI_INTERRUPT_HANDLED;
430}
431#endif				/* HAVE_ACPI_LEGACY_ALARM */
432
433int __init acpi_sleep_proc_init(void)
434{
435#ifdef	HAVE_ACPI_LEGACY_ALARM
436	/* 'alarm' [R/W] */
437	proc_create("alarm", S_IFREG | S_IRUGO | S_IWUSR,
438		    acpi_root_dir, &acpi_system_alarm_fops);
439
440	acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
441	/*
442	 * Disable the RTC event after installing RTC handler.
443	 * Only when RTC alarm is set will it be enabled.
444	 */
445	acpi_clear_event(ACPI_EVENT_RTC);
446	acpi_disable_event(ACPI_EVENT_RTC, 0);
447#endif				/* HAVE_ACPI_LEGACY_ALARM */
448
449	/* 'wakeup device' [R/W] */
450	proc_create("wakeup", S_IFREG | S_IRUGO | S_IWUSR,
451		    acpi_root_dir, &acpi_system_wakeup_device_fops);
452
453	return 0;
454}
455